CATHODE RAY TOMES

SonSon Manual

Son Son (Capcom, 1984) · Manual · 16 pages · 6 sections · original scan

Page 1

HTS TALS LST ING Bay (OU |

Wa GU Es

Telephone:

Page 2

> BEFORE YOU GET STARRTED...STOP! ©

  • Does your GEMD® package include all listed parts? (Is it complete?)
  • Is the game you have chosen to transform able to supply all the required voltages for the Game?
NOTE: Some games, [i.e. Ms. Pac Man, Galaxian, etc.) regulate their voltages on the main P.C.B. This makes the existing power supply inefficient. These games will require a change in power supply

for your QGv@ Gane. Many game supply houses can offer you

a switching regulated power supply for o relatively low cost.

  • «Is the monitor configuration compatible? In most games it is rather difficult to change the monitor from a vertical mount to a horizontal mount. We recommend you choose a game cabinet with the same mount as your GMD requires.
  • Do you have the necessary tools? (See the recommended tool list)

CAUTION

F.C.C. REGULATION COMPLIANCE

THE P.C. BOARD CAGE SUPPLIED WITH THIS NEW GAME KIT MUST BE UTILIZED AND TERMINATED TO GROUND AT THE TIME OF INSTALLATION. THIS IS TO AVOID RADIO FREQUENCY RADIATION AND COMPLY WITH THE LIMITS FOR A CLASS “A” COMPUTING DEVICE PURSUANT TO SUB-PART “J” OF PART 15 OF F.C.C. RULES, WHICH ARE DESIGNED TO PROVIDE REASONABLE PROTEDTION AGAINST INTERFERENCE WHEN OPERATED IN A COMMERCIAL ENVIRONMENT. OPERATION OF THIS EQUIPMENT AN A RESIDENTIAL AREA IS LIKELY TO CAUSE INTERFERENCE - IN WHICH CASE, THE USER AT HIS OWN EXPENSE, WILL BE REQUIRED TO TAKE WHATEVER MEASURES MAY BE REQUIRED TO CORRECT THE INTERFERENCE.

Page 3

NEW GAME PACKAGE CONTENTS:

1- MAIN PRINTED CIRCUIT BOARD (PCB) 1- PCB CAGE (FCC REQUIRED) 1- CONNECTING WIRE HARNESS 2- 4-WAY JOYSTICKS

4- PLAYER BUTTONS

1- MARQUEE

1- CONTROL PANEL OVERLAY 1- PLEX CONTROL COVER 1- SET PLAY INSTRUCTION & FUNCTION LABELS 1- NEW GAME PACKAGE INSTALLATION MANUAL

NOTE: Replacement accessories available through your distributor

A +5 VDC 5 amp A +12 VDC 1 amp EZ

Page 4

COIN

START SW +5V

COIN 2

2P START SW

TLLLTL A

COIN Li

SHOT

LEFT

RIGHT

UP

DOWN

®

B

+12V

SPEAKER @

COUNTER

GND(12V

GND )

r U SHOT 1

LEFT

RIGHT

UP

DOWN

@

COP SYNC ~

+12V

SPEAKER ©

COIN 2 COUNTER

GND(12v) DIP SW 2

DIP SW 1

CONTROL PANEL

4 - WAY

1 & 2 PLAYER

FIRE BUTTONS JOYSTICKS

BUTTONS

Page 5

DIP SW 1

COIN - CREDIT

COIN CREDIT

FREE PLAY

DIP SW2

© SONSON TONTON 2 | TONTON swla | s | BONUS LEVEL ATTRACT MODE

PICTURE FLIP

NORMAL

ON | ON | 30,000 2nd- 90,000 3rd-120,000 OFF| OFF] 20,000 ON ] OFF] 30,000 OFF| ON | 20,000 2nd- 80,000 3ra-100,000

sw | 6 | 7 | prrFrcuL OFF |OFF] pasy

° ON

OFF | ON HARD

ON ON VERY HARD

Page 6

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 7

$ SOMETHING TO THINK ABOUT $

Your final product will be a OQ? Gag.

You have made a wise decision to transform a game that has seen better days in the all important cash box into a Gag. this is by far the most cost effective alternative to maximize the return of your initial investment. All you provide is the cabinet with a power supply and a monitor. Oh yes, you will need a touch of elbow grease. And that's it! We provide the rest. The end result is ... A Gag at a very low cost.

FACT: Spend a little time on the cabinet's appearance [i.e. marquee, control panel and cabinet graphics]. With a little paint, some wood putty and new lights, you will raise the profits of any game...especially with the introduction of a GENO package.

The GG ‘ook should always apply to the inside of your game as well as the outside. A few wire ties and shrink tubing on your harness; some fastening hardware on your subassemblies and a sweep with the ol’ vacuum cleaner will ensure that unnecessary Glitches do not occur.

REMEMBER: You are creating a Gaae.

If you have any questions or just need some advice on any of your BRD Geaarg transformations, don't hesitate in giving a member of our technical staff a call.

Phone: (213) 539-2744 Telex: 182426

Page 8

©) LET'S GET OUR HANDS DIRTY ©)

PREPARING THE ORIGINAL GAME FOR THE OQ? Gawae

Remove the following:

  • Main logic board(s)
  • Control panel
  • Monitor plexiglass
  • Monitor Bezel
  • Marquee
  • Graphics

| would recommend painting your cabinet to give it a fresh new look. (If it is geographically inconvenient to make use of our facilities, you may consider having an auto body shop take care of your painting needs.)

If you intend to use your original plexiglass, be sure it is in mint condition or it should be replaced.

Thoroughly clean out your cabinet.

TIME TO INSTALL YOUR NEW GOODIES ®

BEFORE YOU START... REMEMBER DO NOT DO THIS WORK WITH THE POWER ON!

LOGIC P.C.B. CAGE

Mount the logic cage securely (away from power supply).

A) Mark and drill pilot holes (3/32"). B) Place the logic cage (required by FCC) over the holes and secure it with some of the wood screws you have lying around the shop. Use enough screws to be sure the cage is secure to the cabinet wall. C) Install the P.C.B. into the logic cage.

NOTE: Leave the cage cover off until you have attached the entire wire harness and have tested the game for proper operation.
Page 9

WIRE HARNESS

Attach the wire harness connector to the main logic board.

CAUTION: Sometimes the connector is not keyed and it is very easy to install it reversed on the logic board. Even if it is keyed, always triple check to be sure the wire inputs were connected correctly to the connector and the connector to the logic board.

CONNECTING THE WIRE HARNESS TO THE EXISTING WIRES:

When you hook up the control panel, power supply, monitor or other subassemblies that remain in the game cabinet to your new wire harness, try and use their existing secondary connectors.

  • Cut the original wire approximately three inches from the original connector. Strip off about one half inch of the insulation.
  • Solder the new wire designated for that position to the original wire you just stripped.
WARNING: DO NOT JUST TIE THE WIRES TOGETHER. THIS CAN CAUSE NAGGING INTERMITTENT PROBLEMS THROUGH LOOSE CONNECTIONS OR OXIDATION OR BOTH. ALWAYS TAKE THE TIME TO DO IT RIGHT.
  • Melt shrink tubing around all your in-line wire connections. Do not use electrical tape. Tape could unravel over a period of time due to the cabinet heat and cause you a great deal of trouble.
  • Use wire tie wraps, and secure the cable to the cabinet whenever

it seems necessary. Remember this is a GMD : nota

sloppy conversion.

POWER WIRES:

  • Connect the wires that are designated for your power supply. You will need a supply of +5V,+12V & ground. Your Gaae package may not require all of the voltages that were used in the original game. Tie off any unused wires.
  • You will notice that you probably have more than one wire for each voltage. It is a good idea to use all wires supplied (double up if it is necessary). This will help to ensure that you don't overload the edge connector pins and cause them to "burn".
Page 10

MONITOR WIRES:

You will be connecting the wires designated for the RED, GREEN & BLUE video guns along with the SYNC & GROUND wires.

NOTE... CONCERNING SYNC:

Your QQ? GMa only calls for one sync wire connection, this is called campasét syne (horizontal and vertical tied together). This composit sync is also #egaf/ve. Most monitors have supply positions for both negative and positive sync. You can check your monitor manual or call our technical department for assistance

SPEAKER WIRES:

Find the two wires that are designated for the speaker and hook ‘em on up.

COIN DOOR WIRES:

  • Connect the designated wires to the coin switches and meter.
  • You can connect your door lamps to the unused -5V power supply. Some games have separate power outputs for the coin door lamps.

GUESS WHAT? You are almost done with the electrical connections of your BRD GENOA. All you have left is the control panel wiring. But we are going to hold off on that for right now. We have a few other things we need to do first. So why don't you go ahead and get yourself a drink of water and stretch your legs. When you return, we can take a fresh look at your progress and then move forward.

{ smoxe TEST f

WHAT TEST? Don't worry. All this means is that you are ready to apply power to the system for the first time and you pray that there will be no smoke from a simple oversight.

Page 11

You are just about ready to power up the logic board. But first we need to recheck your work.

1)

2)

3)

4) Carefully inspect the game for loose power wires, exposed connections and extra fastening hardware.

Make sure the logic board, board cage, monitor and power supply are securely fastened in place.

Double check the connectors to be sure they are wired and hooked up properly.

Set the dip switches on the logic board to the factory recommendations. Also, be sure you set the dip switchs for “DEMO WITH SOUND". This will enable you to hear as well as see that your new P.C.B. is functional.

TIME TO APPLY POWER:

1)

2) Look and smell for smoke. (TURN OFF IMMEDIATELY IF ANY IS NOTICED)

Listen for game sounds. If after one minute you have not heard any sounds: A) Check for proper dip switch settings. B) Adjust volume control and check speaker connections. C) Check the +12V power supply to the logic board

NOTE: If you do get sounds, but they are a little fuzzy, switch the wires around on the speaker.
Page 12

3) How is the monitor image? a)

B) Is the picture in sync? If your picture has the top and bottom halves of the screen reversed and it will not stop rolling, change your sync polarity on the monitor. (Positive to negative). If your monitor does not have dual polarity positions for sync, then you will need to reverse the sync yourself by installing a simple one 1.C. circuit between the logic board and the monitor. (The following illustration shows a hookup for both campesiie and separate syncs.

HORIZONTAL SYNC INPUT FROM P.C.B. (OR COMPOSITE SYNC INPUT) HORIZONTAL SYNC OUTPUT TO MONITOR (OR COMPOSITE SYNC OUTPUT) VERTICAL SYNC INPUT FROM P.C.B.

VERTICAL SYNC GUTPUT TO MONITOR NOT USED

NOT USED

GROUND

Now how's your picture? « Is it centered? ® Is it too bright or dim? ¢ Is it in focus? Check your monitor manual for these adjustments. If your screen looks "off", then your GQ? GEMao transformation may have been in vain. So let's take the time to make the monitor look great.

CONTROL PANEL ASSEMBLY

  • Remove the buttons, joysticks and wire harness and put them aside for now. Do not remove the original panel overlay until the new holes have been drilled.
Page 13

2)

4)

5)

6)

ro)

8) Mark positions on the panel for the new holes as specified in your Paw aauag manual.

ROMSTAR supplies a clear 1/8" thick piece of plexiglass with every Gag package to cover the control panel. We feel that your QQ genaxy investment is well worth protecting...and the control panel is the first place to show wear and tear.

  • You will need to cut this piece to size. Use the control panel as a template. « Use a razor knife to score the plexiglass deeply. Then use a pair of pliers to break away the extra plexiglass.

Now drill the holes in your panel that you have marked off for the butions, joystick and belts. HINT: For best results, use a chassis or sheet metal punch for button holes.

Drill the same holes on your plexiglass panel protector. Once again use your panel as a template. HINT: To avoid chipping while you are drilling the holes, place the plexiglass securely on a soft wood surface and use a plexiglass drill bit and hole cutter.

The holes are now all cut. Smooth them out on your panel and plexiglass with a fine toothed file.

Remove the original graphics overlay from the panel. Clean up the panel and install your LRRBGE Graphics. MAKE IT EASIER: Peel the top half of the protective backing off of your GRANDE sraphics. Start from the center and smooth out your overlay. Make sure you have about an inch extra coming off the top. Ve 4uéé/es g/eese. Now peel off the bottom half and do the same as you did for the top.

Adhere the instruction and function lables. (Jump, Fire, Players 1 & 2, Ete.)

Install the Plex Control Cover over your completed @QZ) GGNaKD panel.

NOTE: Be sure to bolt the plexiglass securely to the panel.
Page 14
  • Mount the joystick and the buttons to the panel and wire them up. (Use the existing Panel wiring if possible)

Y MARQUEE INSTALLATION V

Using the original marquee as a template, Center your GEMD® Marquee graphics and score the new marquee deeply to fit the cabinet. Break off the excess with pliers. Be sure the light behind the marquee works. Everything should always work on a new game.

Take your time ... Don't forget this is going to be a g@qg Ga -

? FINISHING TOUCHES /

  • Check the game inside and out for any imperfections. Secure any loose wiring or fastening hardware.
  • Make sure the coin door is tight and the coin mechs are well adjusted. A game is no good to anybody if you can't get a coin into it.
  • 3) Once again go over every step of this gaae transformation in your mind. Be sure everything is correct and to your liking.
  • Power up the game. A) Check all the coin switches. (Does the coin meter work?) B) Play your OG? Ga. Are all the player controls working? @ Are the game sounds present? ® Is the volume level proper? e Are the dip switches set properly?

Well, thats about it. Good Luck .

Page 15

a, RECOMMENDED TOOLS AND SUPPLIES

IS ROMSTAR —- DED GMD package. PHILLIPS AND SLOT SCREW DRIVERS SOCKET SET ENTHUSIASTIC ATTITUDE WIRE CUTTERS AND STRIPPERS PLIERS OR CHANNEL LOCKS PLANNING AND CAREFUL THOUGHT ELECTRIC DRILL 3/32" © 1/4" © 7/16" DRILL BITS 1/4" PLEH BIT 11/4" CHASSIS OR SHEET METAL PUNCH 11/4" PLEH HOLE SAW GLASS OF WATER AND A SNACK SMALL FILE RAZOR KNIFE AND SHARP BLADES STRAIGHT EDGE PATIENCE PAINTING SUPPLIES (if you do your own painting) © PAINT BRUSH AND PAINT (don't forget the primer) © PAINT ROLLER AND PAN e SAND PAPER © PUTTY KNIFE AND WOOD PUTTY fl GOOD NIGHTS SLEEP STAPLE GUN AND STAPLES SOLDERING IRON AND 60/40 RESIN CORE SOLDER UDACUUM CLEANER ASSORTED FASTENING HARDWARE SHRINK TUBING: 3/32" © 1/8" © 3/16" MASKING TAPE COMMON SENSE 31/2" OR 4" WIRE TIES SPRAY WINDOW CLEANER AND RAGS (baby diapers work GREAT!)

Page 16

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.