Colony 7 Manual (72-00005-001)
Colony 7 (set 1) (Taito, 1981) · Manual · 30 pages · 6 sections · original scan
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
. Page 2
nN YAN
“COLONY 7° UPRIGHT
- GAME SET-UP
A. INTRODUCTION
TAITO AMERICA’S CORPORATION'S “COLONY 7”™ upright game is a skill-based video action game, designed for one or two players.
The object of the game is to defend ‘‘COLONY 7'’™ which is the most distant earth deep space colony, and IT'S UNDER ATTACK. The colony consists of 3 fuel bases, a space port, laboratories, and a colony housing area. It is defended by 2 anti-matter cannons able to be aimed by the player on its computer generated sites. “COLONY 7''™ is protected by ar ion shield. This shield is blasted away in random chunks enemy fire. A bonus colony is awarded at one of two adjustable score levels. When the piayer presses the “FIRE BUTTON” both cannons ignite into firery anti-matter beams, these converge on the location defined by the site where the cannons were fired. The cannons beam moves rapidly across the screen to explode at the target. The first wave of incoming ships consist of a fighter squadrom which accompanies 4 small mobile scout, an Advisor Ship, and the Cannon Bummer.. When the scout is out additional fighters are continuously added. The scout remains high in the sky, has no weapons and a low point value. Bonuses will be accurnmulated upon defeat of a squadron. Bonuses are also awarded for remaining structures in the colony. Point vaiues will increase with each subsequent squadron. The fighters are equipped with plasma rockets, which they use to attack the colony. Their rockets have a limited range allowing the player to concentrate on the lowest fighter. The player is aided by a deep space scanner capable of determining the number of remaining fighter in the squadron. One ‘Eradicator’ rocket will be provided as part of each colony. By using the ‘‘Eradicator Button’’ ali the enemies on the screen at the time will be destroyed. Eradicators can be destroyed by the fire and will take with them adjacent gantry, which would have a score value if defended. The “Cannon Bummer” will fly along the top of the screen randomly. If not destroyed, it drops bombs targeting at either cannon. The “‘Advisor’’ ships will appear in all squadrons, randomly and only fora few seconds. The ‘‘Advisor’’ ships will score higher point value at the expense of the players defense. Three Mega-Blasters will be provided as part of the colony. The Mega-Blaster Button fires one shot at a time from the cannon. When it reaches the target cross it splits into 32 bombs which destroy all enemies within a limited range. Each Mega-Blaster relies on a fuel base which can be destroyed by enemy fire.
EXTENDED WEAPONRY When extended weaponry is desired additional coin(s) are required. Extended weaponry gives the players weapons a greater area of destruction.
B. GAME INSPECTION
TAITO AMERICA’S CORPORATION’S ‘‘COLONY 7"™ upright game is ready to play when received. However, careful inspection is necessary to insure your game is in perfect condition. Please verify the following before turning the game on.
Examine external parts for chips, dents, or broken parts.
- Open the service door and examine the following: Plug-in connectors to make sure they are firmly seated.
- Speaker
- Player controls
- Printed circuit boards making sure there is no damage to the components.
- Check for loose foreign objects especially metal objects which may cause electrical problems.
- Fuses, making sure they are firmly seated in the holders.
- Coin Mechanisms The Video Monitor is properly adjusted before shipping. If there are any adjustments necessary refer to our Video Monitor Manual (72-00003- 001),
If problems occur or technical assistance is required, contact our Customer Service Department HOT LINE Toll Free 800-323-0666 (except Illinois). Illineis phone 312 981-1000 X215.
POWER REQUIREMENTS
TAITO AMERICA CORPORATION'S ‘COLONY 7''™ upright game is shipped ready for operation at 120VAC, 60Hz with a power consumption of approximately 250 Watts.
For safe operation it is recommended the cabinet be grounded. This game is equipped with a three conductor power cable. The third conductor is the ground condustor and when the cable is plugged into an appropriate receptable, the game is grounded. The offset pin on the “power cable's three-prong connector is the ground connection.
LOCATION SPACE REQUIREMENTS
Depth - 35” (87.5cm) Wiath - 24” (61cm) Height - 68” (171cm) Weight - 300 Ibs. Packaged Weight
€. GAME INSTALLATION
The following precautions should be followed when installing the game.
- Avoid rough handling of the game, the picture tube is fragile. Install the game on a level surface. “Avoid installing the game where it may receive excessive sunlight or heat, to prevent the game from rising internal temperature.
- Do not install in a damp or dusty location.
- For a short time after connecting the power fo the game, the picture may be temporarily distorted.
D. DIP SWITCH AND VOLUME CONTROL SETTINGS
DIP SWITCHES
TAITO AMERICA CORPORATION'S COLONY 7°’™ upright game provides the feitowing option switches. See Figure 1. These option switches can be found on the Option Board, which is located on the inside wall of the cabinet.
SW1 - Sets the initial number of colonys. The OFF position provides 2 colonys, the ON position provides 3 colonys. *$W2 - Sets the bonus level. The OFF position provides a low bonus level, ON provides a high bonus level. See Figure 1. SWS - NOT USED SW4 - NOT USED
*NOTE TABLE 1 indicates the extended mode of operation which provides an increase in the power of the weaponry. When set for the extended mode of operation an additional coin must be deposited.
{ 2 COLONYS 1 3 COLONYS
| Norm, | 20,000 | 30,000 | |
| Low Bonus Level | Fe | 49°00 | 50,000 | |
| : | Norm. | 30,000 | 40,000 |
| High Bonus Level | Ext. | 50,000 | 70'000 |
Table 1 Normat and Extended Bonus Levels
OPTION SWITCH & VOLUME CONTROL LOCATIONS
VOLUME CONTROL SETTING The Voiume Control is located on the inside frame of the coin door. See Figure 1. Volume increases when turned counterciockwise as indicated.
- MAINTENANCE Ail games require a certain amount of maintenance to keep them in good condition. A periodic check of mechartical controls would be beneficial to guarantee your game will be profitable.
A. CLEANING The exterior of the game, all metal parts and all plastic parts can be cleaned with an non-abrasive cleanser. Caution should be used when Cleaning the plastic, a dry cloth can cause scratches and result in a foggy appearance.
B. FUSE REPLACEMENT This game uses six fuses, 5 are Iscated on the Switching Regulator. See Figure 2 for size and part number of fuses. One fuse is located on the Power Supply itself.
C. VIDEO MONITOR REMOVAL Ifyou need to remove the video monitor, follow the instructions listed below:
itis recommended the game be left disconnected for at least one hour before removing the video monitor. This will probably discharge the video tube but EXTREME
Remove power from the line voltage. Disconnect the monitor cable connecter. Remove the wire cable clamp. Take out ihe two side bolts, one on each side of the cabinet. Remove the four mounting bolts and disconnect the green Qround wire. Slide the monitor out by pulling the monitor toward you.
Use extreme caution and do not touch electrical parts of the monitor yoke area with your hands or with any metal object in your hands! High voltages may exist in any monitor, even with power disconnected.
D. VIDEO MONITOR ADJUSTMENTS
TAITO AMERICA CORPORATION presently uses either a Wells- Gardner Corporation or Electrohome 19” color Video Monitor in the “COLONY 7°™ upright game. Refer to the Monitor Manual (72-00003- 001} for your specific video monitor. Be sure to heed all the WARNINGS and CAUTION INSTRUCTIONS provided before repairing or replacing your Video Monitor.
£. FLUORESCENT TUBE REPLACEMENT
- Remove the three screws from the marquee bracket, being sure to hold the glass while removing the screws.
- Remove the marquee glass and the fluorescent bulb is accessible. With both hands turn the bulb toward you, carefully pull the lamp out of the lamp socket.
F. PRINTED CIRCUIT BOARD REPLACEMENT
You may wish to remove the “COLONY 7”™ upright printed circuit boards for replacement or service. See Figrue 4 to remove the “COLONY 7’™ upright board set, unclip the top of the set, held in place by 3 small clips and lift the boards out of the wooden cleat at the bottom of the board set.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. As temporarily permitted by regulation it has not been tested for compliance pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.
SWITCHING REGULATOR
TAITO
| ITEM | PART NO. | DESCRIPTION |
| 1 | 800010 | Switching Regulator |
| 2 | 998702 | Shield Box |
3 22B00001-001 | Line Filter 4 26-00003-001 | Service Outlet 5 24-00002-001 | Fuse, 3 AMP, 3AG, Slo-Blo 6 24-00001-001 | Fuse Holder 7 35-00001-001 | Barrier Strip - 8 Position 8 42C00034-001 | Power Mounting Board 9 29B00005-001 | Interlock Switch 10 29B00004-001 | Toggle Power Switch 1 35A00004-001 | Insulator 12 61A00029-001 | Toggle Switch Bracket 13 18A00001-001 | Isolation Transformer
| 14 | 019501 | Noise Filter |
| 15 | 998703 | Shield Cover |
16 61B00030-001 | Interlock Switch Bracket 35B00002-001 Insulating Shield 850005 Switching Regulator Assembly
- Note: Item is noi shown on drawing
SWITCHING REGULATOR
FLOURESCENT BULB PANEL
TAITO ITEM PART NO. DESCRIPTION 27-00001-001 | Flourescent Tube, STD 15 W 18-00602-001 | Ballast Transformer (120V, 60 Hz) 29-00003-001 | Starter 26-00005-001 | Starter Socket 26-00004-001 | Lamp Socket 42B00057-001 | Flourescent Lamp Panel olan} alelr
I
PCB MOUNTING ASSEMBLY
TAITO PART NO. DESCRIPTION 59B00030-001 PCB Clips 998847 “COLONY 7’"™Game Board
998842 “COLONY 7"™CPU Board 08-00008-001 “COLONY 7’'™Board Set 25-00025-004 Connector ‘‘E”’ 4 Pos. 25-00025-004 Connector ‘J’ 4 Pos. 25-00025-020 Connector ‘‘M’’ 20 Pos. 25-00025-010 Connector “Q'" 9 Pos. 25-00025-009 Connector ‘‘P”" 7 Pos. Connector ‘‘T’’ 7 Pos. Connector ‘'R” 9 Pos. 25-00023-007 [ze 42B00085-001 Wood Mounting Cleat
VIDEO & CABNIET ASSEMBLY
TAITO
| ITEM | PART NO. | DESCRIPTION | REFERENCE |
1 47000001-001 | Screened Marquee 2 27-00001-001 | Fluorescent Tube, Std., 15W
| 3 | 42B00057-001 | Fluorescent Lamp Panel | 140006 |
| iz | 26-00004-001 | Lamp Socket | 113000 |
| 5 | 61000007-001 | Marquee Retainer | 500024 |
| 6 | 26-00005-001 | Starter Socket | 114001 |
| 7 | 29-00003-001 | Starter | 114000 |
8 18-00002-001 | Ballast Transformer 9 61B00011-001 | ‘‘L” Bracket 10 41B00002-003 | Cabinet
| iu | 63-00002-001 | ‘T” Molding | 400007 |
| 12 | 59-00008-001 | Clamp Fastener | 390002 |
13 47000002-003 | Screen Cover Glass
| 14 | 63C€00003-001 | Monitor Shroud | 400005 | |
| 15 | 61000016-001 | Glass Retaining Bracket | 500022 | “| |
| 16 | 44C00001-001 | Wheel Assembly | 520000 | |
| 17 | 63B00005-002 | ‘‘L’” Molding, Black, 22%” Long | 400031-A | |
| 18 | 63B00005-003 | 'L’” Molding, Black, 3'%4” Long | 400031-A | |
| 19 | 31-00001-002 | Electrohome Monitor, 19” Color | 620007 |
20 61€00080-001 | Video Mounting Bracket
| 2i | 45-00001-001 | Anchor Plate | 600005-C | |
| 22 | 45-00001-001 | Lock & Key | 600005 | |
| 23 | 42C-00035-001) Cabinet Back | 143003 | |
| 24 | 61B-00027-001) Grill | 500074 | |
| 25 | 500086 | Mounting Bracket Top | AA013580 |
| 26 | 500088 | [ Gash Box | AA028507 |
| 27 | 400050 | Cash Case | AA028506 |
| 28 | 600007 | Lock Plate | AA013593 |
| 29 | 500089 | Cash Box Door | AA026512 |
| 30 | 600006 | Lock (Cash Box) & Key | [aao16545 |
| 31 | 500060 | Coin Funnel | AA025510 |
| 32 | 500061 | Coin Funnel Plate | AA013690 |
| 33 | 115000 | Counter, 6V DC | AA013608 |
| 34 | 500091 | Counter Bracket | |
| 35 | 63B-00006-004) U Channel | 400025 | |
| 36 | 500087 | Bottom Bracket | |
| 37 | 36-00005-001 | Counter Drive Credit Board | 800011 | | |
38 25-00014-001 | 10 Position Edge Connector 39 61A00014-001 | Credit Board Bracket *40 08M00008-001| PCB Set ‘‘COLONY 7”
| “41 | 998841 | Game Board |
| “42 | 998842 | CPU Board |
“43 42C00013-001 | Monitor Cleat “44 _{ 59B00030-001 PCB Clip “45 59B00016-002 | Spacer “46 32B00005-001 | P.C. Board (Option) “47 61C00086-001 | Corner Bracket (Monitor Mounting) *48 07-00005-001 | Speaker
te ee AS,
COIN MECHANISMS AND FRONT DOOR ASSEMBLY
TAITO
| ITEM | PART NO. | DESCRIPTION | REFERENCE |
| 1 | 500010 | Door Frame | AA026510 |
2 79-50005-001 | Price Card U.S. 25¢
| 3 | 27-00002-001 | Pilot Lamp, 12V, 150Ma | [ | |
| 4 | 113001 | Vinyl Socket | AA0S5698 |
| 5 | 61A00051-001 | Coin Entry Plate for 25¢ | AA021536 | |
| 6 | 600006 | Service Lock & Key No. 7900 | AA016558 |
| 7 | 79A00016-001 | TAITC Name Tag | AF9A0016-001 | |
| 8 | 500009 | Coin Rejection Door | AA026511 |
| 9 | 500021-E | Cover Plate | AA019522 |
| 10 | 104000 | Mate-N-Loc Pin A | AA055789 |
| 11 | 103007 | Mate-N-Loc Housing 9 Pin | AA055581 |
| 12 | 103008 | Mate-N-Loc Housing 9 Pin | AA055582 |
| 13 | 104001 | Mate-N-Loc Pin 1 B | AA055790 |
| 14 | 500021-1 | Lock Plate | AA013578 |
| 15 | 500021-G | Coin Guide (B) | AA025508 |
| 16 | 500021-H | Coin Guide (A) | AA025507 |
| 17 | 500021-J | Tilt Switch | AAQ68717 |
18 61-00041-001 | Lock Guard
| 19 | 500021-K | Rejection Button | ‘AA027504 |
| 20 | 500021-L. | Spring Cancel Holder | AA015504 |
| 21 | 020501 | Service Switch | |
| 22 | 500021-M | Cancel Lever | AAQ13557 |
| 23 | §00021-N | Rejector Bracket | AA013554 |
| 24 | 500021-P | Rejector Holder | AA023501 |
| 25 | 500054 | Coin Guide | [aaozss03 |
| 26 | 199005 | Insulator | AA019502 |
27 29-00007-001 | Micro Switch
| 28 | 370002 | Actuator | AA053501 |
| 29 | 500021-R | Rejector Lever Connector |
30 07-00038-001 | Coin Acceptor
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
CONTROL PANEL
TAITO ITEM PART NO. DESCRIPTION | 1 04M00032-001 | Ball/Shaft Kit 2 63B00024-001 | Push Button (White) Ki 63B00024-002 | Push Button (Red) 4 63B00024-004 | Push Button (Black) 5 47D00009-001 | Dash Panel 6 54A01001-001 | Nut 54-11 7 63C000025-001 | Switch Support 8 29B00016-001 | Switch & Leaf 9 42D00087-001 | Control Panel (Wood) 10 61A00015-001 | Strike Hook 11 63D00032-006 | Control Assembly (8-Way)
——— 2,3,4
8-WAY JOYSTICK
TAITO PART NO. DESCRIPTION
63A00031-001 Ball & Shaft
63A00033-001 Mask
63C00027-002 Mounting Plate 62A00002-001 Shock Mount Pad
63C00028-002 Switch Plate 63A00030-001 Actuator
61A00018-001 “L” Bracket
63A00026-001 Switch Spacer 29B00016-002 Leaf Switch
63A00029-001 Spacer 59B00020-017 “EB” Ring
CPU PC BOARD LAYOUT
TAITO ITAITO
| SYM | PART NO. | DESCRIPTION | SYM_|PART NO. | DESCRIPTION | ||
| DFO {70001 | ICS CPU PC Board | 1024 |AAT33164 | LS-IC 74LS257 | ||
| 20P | |DFO90014 | Flat Pin Header | 1C25_ |AAT33203 | LS-IC 74LS367 | |
| 40P | |DFO90013 | Flat Pin Header | | | 1C26_ |AAT33209 | LS-\C 74LS374 |
| 4P_—|DRO90016 | Friction Lock Wafer | 1C27 jAAT33220 | LS-IC 74LS393 | ||
| 7P__|DRO90017 | Friction Lock Wafer | CPU |AAT34019 | CPU 6809E | ||
| gP | |DRO90018 | Friction Lock Wafer | “| | 1C28 |AAT36073 | C-MOS RAM 5101 |
| BC | |0R090023 | Alkaline Battery Cover | (C29 |AAT36074 | C-MOS IC 4071-B | |
| AB | {DRO90024 | Aikaline Battery Cover | ROM1 |16M00003-009 |P-ROM (7641) CS09 | ||
| TS | |AAQ52578 | Tact Switch | ROM2}16M00003-010 | P-ROM (7641) CS10 | ||
| (81 | [AAO55786 | IC Socket, 16P | Ct | [AAT41036 | CAP, Electrolytic 25VB-100 |
| 182 | |AAQ55787 | IC Socket, 24P | C2 | [AAT41302 | CAP, Ceramic |
| 1S3__|AA055812 | IC Socket, 40P | [c3_laat4i244 | CAP, Film TDY 1-H-104 | ||
| %X-TAL} AAQ69605 | X-TAL 12, OOOMHZ | C4 | |AAT41334 | CAP, Ceramic 470PF-50V | |
| [TR AAT11034 | Transistor 2SC509-Y | C5 = |AAT41449 | CAP, Tantalum SSG10-22F | ||
| TR2_|AAT11037 | Transistor 2SC509-0 | C6 | \AAT41672 | CAP, Ceramic 100000PF 50V | |
| D1 | _|AAT12025 | Diode 1$1588 | [Rt | |AAT51717 | RES, Carbon 10 OHM “W +5% |
| D2 [AAT12048 | [Diode IN5817 | R2 | _|AAT51737 | RES, Carbon 68 OHM %4W +5% | |
| ZD1_|AAT13038 | lzsue Diode 05Z-6.8V | R38 | |AATS1741 | RES, Carbon 100 OHM YW +5% | |
| C1 | |AAT32001 | TTL-IC 7400 | Ra | AATS1745 | RES, Carbon 150 OHM YW 5% |
| fica | AAT32002 | TTLAC 7402 | R5 | —_|AAT51751 | RES, Carbon 270 OHM %4W +5% |
| {C3 | AAT32003 | TTL-IC 7404 | R6 | |AAT5S1753 | RES, Carbon 330 OHM %W +5% | |
| [!c4__|AAT32004 | TIL-IC 7440 | _| | {R7 | AATS1757 | RES, Carbon 470 OHM YW +5% |
| (Ics | AAT32005 | [TTL-Ic 7420 | _ | R8 = !AATS1759 | RES, Carbon 560 OHM %4W +5% |
| IC6_|AAT32007 | TTL-IC 7427 | RQ | _|AATS1765 | RES, Carbon 1K OHM %aW +5% | |
| ier | ‘AAT32011 | [TTL-Ic 7474 | R10 {AAT51767 | RES. Carbon 12K QHM Y4W =5% | |
| j!c8 JAATS2013 | fate 7486 | | | R11 | |AAT51773 | RES, Carbon 22K OHM YW =5% |
| C9 | |AAT32017 | TTL-IC 74153 | R12 | |AATS1775 | RES, Carbon 27K OHM %4W +5% |
| 'C10 |AAT32021 | TTLAC 7432 | R13 |AATS1777 | RES, Carbon 33K OHM %4W +5% | ||
| fic [aaTs2023 | ITTLIC 7408 | R14 [AAT51781 | RES, Carbon 47K OHM %4W +5% | ||
| [ici2 [Aat32064 | TIL-IC 74165 | RiS | AATS1789 | RES, Carbon 10K OHM YaW +5% | ||
| |!C13_|AAT32105 | TTL-iC 9316 | R16 {AAT51797 | RES, Carbon 22K OHM %W +5% | ||
| 1014 |AAT32166 | TTL-IC 7411 | R17 |AAT51801 | RES, Carbon 33K OHM Y4W +5% | ||
| C15 |AAT32168 | Dynamic Ram 4116-20 | R18 |AAT51805 | RES, Carbon 47K OHM YW +5% | ||
| 1C16 }AAT32175 | {TLC 7421 | R19 _}AATS1825 | RES, Carbon 330K OHM %4W +5% | ||
| IC17_|AAT32176 | Ram 74.889 | d | AA069536 | dumper Wire | |
| 1018 |AAT33005 | LS-IC 74LS04 | SH | Sub-Harness Assembly | ||
| j1C19 |AAT33051 | __|LS-IC 74LS74 | Cv | _|AA069534 | | Convex | |
| 1C20_ | AAT33076 | LS-IC 74LS107 | 7P | —_|DFO90037 | SL156 Post Header, 7P. Side Type | |
| 1C21_|AAT33094 | LS-IC 74LS133 | {9P | _|DFO90038 | SL156 Post Header, 9P Side Type | |
| \C22 | AAT33097 | LS-IC 74LS139 | 20P | |DFO90023 | Angle Pin Header, 20P | |
| 1023 |AAT33157 | LS-IC 74LS245 | 40P | |DFO90024 | Angie Pin Header, 40P |
resi *
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
PC GAME BOARD
TAITO TAITO
| SYM |PART NO. | DESCRIPTION | SYM |PART NO. | DESCRIPTION | ||
| DFO70016 | GAME PC BOARD | 116 |AAT32144 | Dynamic Ram, 6810 | ||
| 4P | |DRO90016 | Friction Lock Wafer, 4P | ROM1}16M00003-001 | P-ROM (2532) CS01 | ||
| QP | |DRO90018 | Friction Lock Wafer, 9P | ROM2/16M00003-002 | P-ROM (2532) CS02 | ||
| 10P | |DRO90019 | Friction Lock Wafer, 10P | ROM3}16M00003-003 | P-ROM (2532) CS03 | ||
| [2oP | |DFO90023 | Angle Pin Header, 20P | ROM4}16M00003-004 | P-ROM (2716) CS04 | ||
| 40P | DFO90024 | Angle Pin Header, 40P | ROMS] 16M00003-005 | P-ROM (2716) CSO5 | |||
| —1 | AAQ17627 | Connector Sticker, E1 | ROM6]16M00003-006 | P-ROM (2716) CSO6 | ||
| J1 | |AA017639 | Connector Sticker, J1 | ROM7|16M00003-007 | P-ROM (2716) CSO7 | ||
| M | AAO17647 | Connector Sticker, M | “| | ROM8}16M00003-008 | P-ROM (2716) CS08 | |
| P | AAQ17653 | Connector Sticker, P | ROM 11]16M00003-001 | P-ROM (2716) CS11 | ||
| Q | /AA017656 | Connector Sticker, Q | C1 | |AAT41095 | Cap, Electrolytic, 167100 |
| D.P. |AA052575 | Dip Switch, DSS3. | C2 =‘ |AAT41098 | Cap, Electrolytic, 167470 | ||
| T.S._ |AA052578 | Tact Switch | C3 | |AAT41099 | Cap, Electrolytic, 167100 | |
| 1S1 | |AAQ55786 | IC-Socket, 16P | C4 = |AAT41102 | Cap, Electrolytic, 1674700 | |
| 1S2_|AA055787 | IC-Socket, 24P | C5 | |AAT41232 | Cap, Film TDY-1H-102 | |
| 1S3__ | |AA055812 | IC-Socket, 40P | C6 | |AAT41244 | Cap, Film TDY-1H-104 |
| X-TAL] AA069606 | X-TAL, 358 MHZ. | C7__|AAT41306 | Cap, Ceramic, 33PF SOV | ||
| T.R. }AAT11034 | >| Transistor, 25C509-Y | C8 | |AAT41310 | Cap, Ceramic, 47PF 50V | |
| L.E.DJAAT12022 | L.E.D. TLR102 | C9 | |AAT41334 | Cap. Ceramic, 470PF SOV | |
| ZD =} AAT13039 | Zener Diode, 05Z-6.8V | C10 | |AAT41411 | Cap, Ceramic, 10000PF 50V | |
| OP | |AAT31060 | {0 Amplifier, LM383 | C11 | -|AAT41430 | Cap, Tantalum, SSG25-10F |
| HS | |DRO40001 | Heat Synk TMM6030 | C12 | |AAT41431 | Cap, Tantalum, SSG35-OR1F |
| ae | te | C13 | [AAT#1436 | —_[Cap, Tantalum, SSG35-1F | |
| ici | [aaT32001 | TTL-IC, 7400 | [C14 |/AAT41437 | Cap, Tantalum, SSG35-2R2F | |
| 1c2 | |AAT32006 | TILIc, 7425 | R1__|AAT51049 | Res, Carbon 220 OHM YW +5% | |
| 1¢3 | |AAT32021 | TTL-lc, 7432 | R2__|AATS1703 | Res, Carbon 2.7 OHM YW +5% | |
| 104 | 1AAT32039 | Tile, 7442 | R3__|AATS1717 | Res, Carbon 10 OHM YW +5% | |
| 1c5 | AAT32084 | TiL-Ic, 7405 | R4_— | |AATS1741 | Res, Carbon 100 OHM %W +5% |
| 1c | |AAT33005 | KS-IC, 74LS04 | RS | |AATS1749 | Res, Carbon 220 OHM “4W +5% |
| \c7|AAT33009 | [s-I¢, 741808 | R6 | —|AAT51753 | Res, Carbon 330 OHM YW +5% | |
| 1c8 | AAT33097 | LS-IG, 7418139 | R7__|AAT51765 | Res, Carbon 1K OHM %4W +5% | ||
| ico | |AAT33164 | [S-IC, 74L8257 | R8_|AAT51777 | Res, Carbon 33K OHM YsW =5% | |
| ic10 AAT33221 | LS-IC, 7418395 | RQ | paTeNeI | Res, Carbon 47K OHM ¥4W +5% | |
| Pla | AAT34014 | PIA, 6821 | R10_|AAT51789 | Res, Carbon 10K OHM Y4W +5% | |
| cpu lAaat34018 | CPU, 6808 | R11 | |AAT51805 | Res, Carbon 47K OHM %4W +5% | |
| ic11 [AAT35016 | D-A Converter, 1408L6S | R12 | |AAT51849 | Res, Carbon 3.3M OHM %4W +5% | |
| ict [AAT36051 | _|G-MOS-IC, 40508 | ee | cee | ||
| IC13_ | AAT36068 | C-MOS-IC, 4049 | Jumper Wire | |||
| 1C14_ | AAT36069 | C-MOS-IC, 4069B | R13 |AAT51982 | Res, Carbon 10 OHM YW +5% |
1C15_}AAT36075 C-MOS-IC, 4068B
PC GAME BOARD
bet Se om mM A } ei a : @w) 4SL-G O] l|s g iit yoy alls
‘a
G AME
P.C. Board Assy. 99884 | +R Guo. 45v Souno Gwo. si R ume iwi toon, | Couvrer Drive PCB. Assy. a 3%" 00001-001 Monitor (Evecrre- Home) ‘d0002- 002. = o00/-ock, orzs4se]o
mS Dire
¥7Lrn0)
72 mi 4 Y p [123456749 0|D
Souns Our 4 3
Mowune +
Vou ne Gno. Orr Suef Com | # Nore: 120 wa.c.~ War. wae ro carn. 1445 Bur. wet ro 220 v.a.c.~ Wut. wike To
i = | Term, 346.
i Team.1, rumree “Teron. 270 4: Bux, Wie To Téka.5,
wr ae be Tsovarion:
TRANSFORMER
ee =
aoa 15a! {fies in Fivorescenr
Lane
Sear)
H[Exeseed |F <a] of-an]>
+Rv oo
+5v al-srseer =:
thy Tova.
Sy loc Seevice Ourier
a Cir23456789|C S \ConrRow.
Aeon, ad te 8 mon, s
MR Pea WIRING DIAGRAM
Sy aby 15V 15
ry 3204 Ete:
SzHe
i ras
é a
RSRORS ¢ EERE ay feficholet BERS ij i
rugstele ef Baa s2asRsuds 3 +8 g
Za8 te CS3 (2-B8) C54 (2-B8) C55 (2- B8) CS6 (2-F2) C$7 (2-F2) C58 (2-F2) C$9 (2-F2) C$10 (2-F2) C511 (2-F2)
YO (2~Co) p a
Bm yy (2-68) GAME BOARD SCHEMATIC FIGURE 12-1
(4- if GAME BOARD SCHEMATIC FIGURE 12-2
“Tl Re Pail
7 am 28 Bi = 5
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
GAME BOARD SCHEMATIC FIGURE 12-5 SEV “OSHS” c-SON DLAWYLOTI | @ JIWWeID : © wid! @ WOTHLNZL ©
30Wd ONILNNOW
@-Fa: CPU BOARD SCHEMATIC FIGURE 13-1
J2MHz (= F5)
33K sve) po F5)
= S838aag5 is Sng GY OAGIA CPU BOARD SCHEMATIC FIGURE 13-2
SRY GOO SRI C-50 SR2 GD)
Ba oq Sees rey ZHANG. MON,
C
= dl of J of Ss) Q (oo)
dl os fo} io) x
Ist aM Bes b 41664
- a IH | oly Cl Tie
cal 40 AP ce a psyrs~_! 74165 pm66 a SRN
ON TRBRE TE ary =p Ea. u pacer) asy 1 FR tuene * SCREEN (2-A3) CONTROL (I-A2) i i (48) | Pat Boek Fy (Fi) TC.
(- CORD ee “EVE . are HR ’ Jd CPU BOARD SCHEMATIC FIGURE 13-3
4-8 Ay rN]
(2-F2)
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
NOTES
\rairo/
TAITO AMERICA CORPORATION
1256 Estes Avenue, Elk Grove Village, !L_ 60007 Telephone (312) 981-1000 Telex 25-3290 @