Jungle Treasures R2
Jungle Treasures (Sega, 2003) · Manual · 38 pages · 21 sections · original scan
1ST PRINTING JULY ‘03 REV. 2
A Game of Skill
Owner’s Manual
SEGA AMUSEMENTS USA, INC. MANUAL NO. 999-1763 GAME CODE: JT
VISIT OUR WEBSITE!
| (os) e | ; | = | : | 2 | = | = | : | = @ SegaService.com |
| S| | e | f | ® | & | @ | |||
| Back | Forward | Stop | Refresh | Home | AutoFill — Print |
@lo
@ macosx @ Mecrosott Mactopia © segaservice.com @ SegaServiceSaies @ Mac OS X Hints - Get the most fram x! a 7 z| SERVICE 8 ' §
| a | ! | ne) Ew VR Gun Protec, | et |
ape By ” : —
é "Bulletins $ *Darl's Office
| a | (Click here for details) | = Game Manuals |
*"“Searenth g "What's New
= 3 Ifyou have any questions or comments about this site please E-Mail to Darl. Davidson@seu.sega.com
4opjoy abeg > '®)
| Search | what's new] | [manuals] | [bulletins] | [assemblies] | [specials] | [Search] | [staff] [Dar!'s office |
pe [Return/Parts Policy] [warranty] [corporate info] [plugins] [Non-framed page
You will need the following items to view this page in its entirety, [Sega Amusements USA 49133 Industrial Dr
All Platforms Windows — Macintosh
Fremont,CA 94538 (415) 701-4580
@ internet zone ly
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety:
To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, ete. are used. Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the prod- Indicates that mishandling the product uct by disregarding this warning by disregarding this caution will cause will cause a potentially hazardous a slight hazardous situation which can
For the safe usage of the product, the following pictographs are used:
this display is attached to places where the Owner’s Manual and or Service Manual should
( Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment,
be referred to.
© Perform work in accordance with the instructions herein stated. Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should perform such work.
© Be sure to turn off power before working on the machine. To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always states to that effect.
© Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth is used). This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.
© Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
© Be sure to use fuses which meet the specified rating. (only for the machines which use fuses). Using fuses exceeding the specified rating can cause a fire and electric shock.
© Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated. SEGA shall not be held responsible for any accidents, compensation for damage to a third party, resulting from the specifications not designated by SEGA. © Ensure that the product meets the requirements of appropriate Electrical Specifications. Before installing the product, check for Electrical Specifications. SEGA products have a nameplate on which Electrical Specifications are described. Ensure that the product is compatible with the power supply voltage and frequency requirements of the location. Using any Electrical Specifications different from the designated Specifications can cause a fire and electric shock. © _ Install and operate the product in places where appropriate lighting is available, allowing warning labels to be clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the office herein stated. © When handling the Monitor, be very careful. (Applies only to the product w/monitor.) Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be performed only be those technical personnel who have knowledge of electricity and technical expertise. © _ Besure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.) Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers. © When transporting or reselling this product, be sure to attach this manual to the product. In the case where commercially available monitors and printers are used in this product, only the contents relating to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the specific Instruction Manual of such equipment.
° Descriptions herein contained may be subject to improvement changes without notice.
- The contents described herein are fully prepared with due care. However, should any question arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on power, check the following points to ensure that the product has been transported in a satisfactory status. Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are Casters and Adjusters, damaged? Do the power supply voltage and frequency requirements meet with those of the location? Are all wiring connectors correctly and securely connected? Unless connected in the correct direction, connector connections can not be made accurately. Do not insert connectors forcibly. Do power cords have cuts and dents? Do the fuses used meet specified rating? Is the Circuit Protector in an energized status? Are all accessories available? Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be firmly closed?
TABLE OF CONTENTS
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS
INTRODUCTION OF THE OWNER’S MANUAL
- HANDLING PRECAUTIONS .... see
- PRECAUTIONS CONCERNING INSTALLATION LOCATION
- OPERATION .... see
- ASSEMBLING AND INSTALLATION ... sans
- PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
- NAME OF PARTS ..
- GAME DESCRIPTION .
- HOWTO PLAY...
- GAMEBOARD CONFIG SETTINGS.
- GAME FEATURES
- GAME ERRORS
- TEST MODE...
- DESIGN RELATED PARTS
- PARTS... ae
- WIRE COLOR CODE TABLE
- INPUT PORT ASSIGNMENTS ..
- OUTPUT PORT ASSIGNMENTS .... 18 - 25
27-28
SPECIFICATIONS Installation Space : 24.75 inches width X 42.25 inches deep Height : 62.5 inches Width : 24.75 inches Length : 34.25 inches Weight : 210 Ibs Power, maximum current : 480W 4A (AC 120V 60 Hz AREA)
MONITOR : No Monitor is used on this product
INTRODUCTION OF THE OWNERS MANUAL
This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards the product, SEGA JUNGLE TREASURES GAME OF SKILL. This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufficiently understanding the instructions. Ifthe product fails to function satisfactorily, non-technical personnel should under no circumstances touch the internal system. Please contact where the product was purchased from.
Use of this product is unlikely to cause physical injuries or damages to property. However, where special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in this manual.
Indicates that mishandling the product by disregarding this display can cause the product's intrinsic performance not to be obtained, resulting in malfunctioning.
SEGA AMUSEMENTS USA, INC./CUSTOMER SERVICE 45133 Industrial Drive, Fremont, California 94538, U.S.A. Phone : (415) 701-6580 Fax : (415) 701-6594
@ PRODUCTION DATE #
This SEGA product was produced in the year of:
2003
This signifies that this work was disclosed in 2003.
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN
Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's main-
Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work should be performed by the serviceman who has technical expertise and knowledge.
The location's maintenance man and serviceman are herein defined as follows:
"Location's Maintenance Man" : Those who have experience in the maintenance of amusement equipment and vending machines, etc., and also participate in the servicing and control of the equipment through such routine work as equipment assembly and installation, servicing and inspections, replacement of units and consumables, etc. within the Amusement Facilities and or locations under the management of the Owner and Owner's Operators of the product.
Activities of Location's Maintenance Man : Assembly & installation, servicing & inspections, and replacement of units & consumables as regards amusement equipment, vending machines, etc.
Serviceman : Those who participate in the designing, manufacturing, inspections and maintenance service of the equipment at an amusement equipment manufacturer. Those who have technical expertise equivalent to that of technical high school graduates as regards electricity, electronics and or mechanical engineering, and daily take part in the servicing & control and repair of amusement equipment.
Serviceman's Activities : Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of amusement equipment and vending machines.
Notes:
- HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine.
mn Before performing work, be sure to turn power off. Performing the work without
- turning power off can cause an electric shock or short circuit. In the case work
(10?) @ For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not permitted, so be careful in this regard.
- PRECAUTIONS CONCERNING INSTALLATION LOCATION
nN This product is an indoor game machine. Do not install it outside. Even indoors, TPN! avoid installing in places mentioned below so as not to cause a fire, electric shock,
LIMITATIONS OF USAGE REQUIREMENTS
nN Be sure to check the Electrical Specifications. WT Ensure that this product is compatible with the location's power supply, voltage
Operation Area
nN @ For the operation of this machine, secure a minimum area of 24.75 in. (W) x
42.25 in. (D). In order to prevent injury resulting from the falling down acci-
(10?) For transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc.) are 24.75 in. (W) and 62.5 in. (H).
IMPORTANT!
—— Electric current consumption —
MAX. 4 A (AC 120 V 60 Hz)
24.75 in.
Uy
“wg xoudde yuo),
WSTTp
- OPERATION
PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.
\ In order to avoid accidents, check the following before starting the operation: @ To ensure maximum safety for the players and the customers, ensure that where
It is suggested to ensure a space allowing the players who feel sick while playing the game to take a rest.
Check if all of the adjusters are in contact with the surface. If they are not, the Cabinet may move and cause an accident.
Ensure that all of the Adjusters are in contact with the floor.
Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to
Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage.
PRECAUTIONS TO BE HEEDED DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.
not allowed to play the game. TARNING * Those who have experienced muscle convulsion or loss of consciousness when play-
@ A very small portion of the population has a condition which may cause them to ex-
- ASSEMBLING AND INSTALLATION
nN Perform assembly work by following the procedure herein stated. Failing to
- comply with the instructions can cause electric shock hazard.
WARNING! Perform assembling as per this manual. Since this is a complex machine,
erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance. When assembling, be sure to use more then one person. Depending on the assembly work, there are some cases in which working by one person alone can cause personal injury or parts damage. Ensure that connectors are accurately connected. Incomplete connections can cause electric shock hazard. Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit or present a fire risk. This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by non-technical personnel can cause a severe accident such as electric shock. Failing to comply with this instruction can cause a severe accident such as electric shock to the player during operation. Provide sufficient space so that assembling can be performed. Performing work in places with narrow space or low ceiling may cause an accident and assembly work to be difficult. To perform work safely and avoid serious accident such as the cabinet's falling down, do not perform work in places where step-like grade differences, a ditch, or slope exist.
nN Handle molded parts with care. Undue weight or pressure may cause them to
break and the broken pieces may cause injury.
Tools such as a Phillips type screwdriver may be required for the assembly work.
Phillips type screwdriver
24.75 in.
“Wg ‘xoudde yuo),
FIG. 6.2¢€ Provide ventilation space for the ventilation opening. Allow more than 28 in. of space for customer traffic. WC Ch
POWER SUPPLY, AND EARTH CONNECTION
nN Be sure to independently use the power supply socket outlet equipped with
TNC! an Earth Leakage Breaker. Using a power supply without an Earth Leakage
The AC Unit is located inside on one side of Cabinet. The AC Unit has Main SW, Earth Terminal and the Inlet which connects the Power Cord.
@ Ensure that the Main SW is OFF.
Power is off when the MAIN SWitch is in the down position. To supply power to the unit, flip the MAIN SW MAIN SWitch upwards.
INLET
OOO
- Note: Actual Power Supply connection may vary from photo
tT —«<— ‘AC Cable (Power Cord)
- PRECAUTIONS WHEN MOVING THE MACHINE
nN @ When moving the machine, be sure to unplug the power plug. Moving the
- machine with the plug a: serted can damage the power cord and cause fire
nN Do not push on any parts made of glass (e.g. Main Plex) or plastic, as these parts
CAUTION!
may break and result in bodily injury.
- NAME OF PARTS
Play Button
Coin Inlet
TABLE | Dimensions and Weights | Width x Length x Height Weight CABINET 24.75 in x 34.25in x 62.5 in 210 LBS
- GAME DESCRIPTION
The following explanations apply to cases where the product is functioning satisfactorily. Should there be anything different then the following contents, some sort of faults may have occurred. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satiffactory operation.
Connect the Power cord to an A/C source, turn on the power switch, then verify the following: + A lamp is lit in the Marquee + Sound is emitted from the speaker below the marquee + The Prize bucket starts spinning + The Play button Lights up + The 7 SEG LED starts it attaction spinning display
Sound is emitted
Flashes
Game Overview
This is a Bulk Vending Product. Meaning the customer inputs money/tokens and recieves a product. The customer inputs his monies and then Elephant moves his head to attempt to dispense a products through the Output Chute. The game can be set to play until the customer wins a prize or on a pay per play basis.
- HOW TO PLAY
@ Play starts with the player inserting a coin/ token into a slot on the front of the machine.
@ When the coin/token is realeased the Elephant moves his head and “Nose” in an attempt to aquire a “Prize” for the customer. Depending of settings on the game board the Elephant may attempt until a prize is dispenced or stop after a single attempt.
@ Ifthe Elephant is successful in aquireing a prize for the customer then the prize is now dispenced though the Prize Chute on the front of the game.
@ After Play the Elephant returns to it attract mode settings. Insert Coin/Token
Elephant attempts for Prize
Prize is dispenced
- Gameboard Config Settings
Dip Switches sw1
Switch 1 (Play until Prize is won) On Enable play until prize is won Off Disable play until prize is won Switch 2 & 3 (Credits per Play)
| Off | Off | 1 Credit for play amount |
| Off | On | 2 Credits for play amount |
| On | Off | 3 Credits for play amount |
| On | On | 4 Credits for play amount |
- If Switch | is “On” then Switches 2&3 (Credits per play) are ignored.
Switch 4 & 5 (Coin amount to play)
| Off | Off | $0.25 to play |
| Off | On | $0.50 to play |
| On | Off | $0.75 to play |
| On | On | $1.00 to play |
Switch 6 (Attract Mode Sounds)
Off Attract Sounds Off
On Attract Sound On
Switch 7 & 8
| Off | Off | 2 nose notches |
| Off | On | 3 nose notches |
| On | Off | 4 nose notches |
| On | On | 5 nose notches |
If large prizes are used, Please adjust Nose Notches to reduce strain when grabbing Objects. Failure to do so may result in damage.
- Game Features Power loss feature: + — If power is lost while in game play, game will resume from where it was interupted.
Nose features: + Nose cam is manufactured with several notches for nose positioning. This allows Prizes of different sizes to be used without compromising game-play. ¢ — Ifthe first notch is not seen by the sensor then the head moves back up to position and then lowers to retry grabbing prizes
- This retries 3 times then posts an error 4 - nose open / close error indicating a problem either with the nose motor or the close optical sensor.
e Optical sensor check sequence: On Power up or game resetting for next play the optical sensor status is analyzed. If Optical status is not saved for each optical sensor the game will initiate the “Optical Sensor check sequence” which moves each motor in sequence to test sensor transitions. Order in which sensors are checked:
- Head will move down and up to test head sensors
- Body will move to Elephants Left sensor and test transition.
- Nose will now close to first nose notch and then open to check open sensor
- Body will move back to home position and start attract mode until coin is inserted.
- Game Errors
Minor Errors: Minor optical sensor errors; does not interferre with game pla or operation.
Minor optical sensors Letter code
- Nose open optical sensor A
- Head down Optical sensor D
- Body Right Optical Sensor F
While in attract mode, display will show the optical sensor letter code if there was a problem.
Major Errors: Motor Errors and Imperative Sensor Errors. If an optical sensor is not blocked within the allowed time the game will enter Error mode. This will stop all motors and lamps and display the error number.
Imperative optical sensors
- Nose close optical sensor
- Head up optical sensor
- Body left optical sensor
- Body home optical sensor
Display will flash “E” “=” “#” (stops game to prevent motor damage if faulty) # = error encountered 1 = IMPERATIVE OPTICAL SENSOR ERROR 2 = ELEPHANT LEFT/RIGHT MOTOR ERROR 3 = HEAD UP/DOWN MOTOR ERROR 4=NOSE OPEN/CLOSE MOTOR ERROR 7 =UP/ DOWN MOTOR ERROR 9 = LEFT / RIGHT MOTOR REVERSED ERROR
Press Test button to exit errors and reset game
- Test Mode
While the game is playing:
- Press test button once plays a sound but doesn’t affect game play.
- Press and hold test button for 2 seconds stops game-play, clears credits and resets game.
While the game is in attract mode:
- If all sensors are operational and there are no errors
- The display attract show lights every segment in a figure eight order
- If there are sensor problems detected the display will show a letter code corresponding to the bad optical sensor + Press Test button once to test lights, optical sensors, prize sensor, and push button. This enters “Segment display Test mode” Segments of the Display will light while the corresponding optical sensor is blocked.
- Pressing push button will initiate check optical sensor sequence and then return to test mode segment display, flashing all segments of bad optical sensors.
- Sements of the Display will flash if there was a problem detected with the corresponding optical sensor.
A A= Nose Open sensor
- B= Nose Close sensor F B * C=Head Up sensor G D=Head Down sensor E C * E=Elephant Left sensor F = Elephant Right sensor G = Elephant Home sensor ALL SEGMENTS = Prize sensor with audible tone *
- Pressing test button again enters Nose Motor Test - Display will read “1” Nose motor will then move from closed to open until test button, or either volume button is pressed
- Press Volume Up or Volume Down buttons to initiate manual nose motor movement test Press Volume Up button to open nose. Press Volume Down button to close nose.
- Pressing Test button again enters Head Up / Down Motor Test - Display will read “2” Head motor will then move from Up to Down until test button or either Volume button is pressed.
- Press Volume up or Volume Down buttons to initiate manual head motor movement test Press Volume up botton or Volume down button to move head up and down.
- Pressing test again enters the Body Left / Right Motor Test - Display will read “3” Body Motor will then move left to right and home until test button or either volume button is pressed
- Press Volume up or Volume down buttons to initiate manual body motor movement test Press Volume up button to move body to its left. Press Volume down button to move body to its right.
- DESIGN RELATED PARTS
999-1726 Plex Marquee JT. 999-1729 Decal Header Left 999-1730 Decal Header Right
999-1738 Glass Front Door 999-1739 Plex Right Side 999-1740 Plex Left Side
999-1736 Eyeball SET 999-1727 Plex Control Pane!
999-1731 Decal Cabinet JT Left 999-1732 Decal Cabinet JT Right
999-1728 Decal Game Front
- PARTS (Header)
Item# Part # Description
| 1 | 999-1733 | Marquee Sash |
| 2 | Local Purchase | Fluorescent Fixture 18 in 15 W Coolwhite |
| 3 | 999-1751 | Speaker |
| 4 | 999-1749 | Prize Ramp |
PARTS (Midheight of Game)
Item# Part #
CmMIADUM
- oO 999-1734
999-1741 999-1742 999-1735 999-1743 999-1745 999-1744 999-1746 Description Top Sash
Main Door Hindge Main Door Frame Bottom Sash Cab Rear Door Key & Lock Rear Door Main Door Key & Lock X2 Prize Chute Top
PARTS (Lower Game)
Item# Part # Description
| 1 | 999-1752 | 7 Segment LED |
| 2 | 999-1753 | Leg Adjuster |
| 3 | 999-1754 | Swivel Casters |
| 4 | 999-1755 | SW Playbutton (Flashing) |
| 5 | 999-1747 | Prize Chute Frame |
| 6 | 999-1748 | Prize Chute Lower |
| 7 | 999-1737 | Plex Prize Chute Door |
PARTS (Electronics)
©
@
Item# Part # Description
| 1 | 998-0185 | Transfomer |
| 2 | 998-0186 | Power Supply |
| 3 | 998-0187 | Line Filter |
| 4 | 998-0189 | Motor Boards |
| 5 | 998-0188 | Main Game Board |
PARTS
@ Item # Part# Description Notes
| 1 | 999-1758 | Elephant Trunk |
| 2 | 999-1756 | Elephant Head |
| 3 | 999-1757 | Elephant Torso |
| 4 | 999-1750 | Prize Bucket Side |
| 5 | 999-1830 | Prize Bucket Bottom |
| 6 | 999-1831 | Prize Bucket Mixer/Diverter |
| 7 | 999-1832 | Prize Sensors |
| 8 | 999-1833 | Prize Chute Center |
| 9 | 999-1834 | Nose Tip |
| 10 | 999-1835 | Nose Tip Claw |
PARTS
Item #
ll Part #
Description Notes
Trunk Tip Mount Trunk Channel Trunk Band Metal Trunk Band Plastic Trunk Band Plastic Ribbed Trunk Frame Trunk Band Bracket Trunk Band Mount/Slide Trunk Band Arm Encoder Wheel 1/2 Trunk Trunk/Head Base Bracket Shoulder Screw Allen Head 1/8 Head Cam Arm Opto Coupler 1 on each side Opto Coupler Bracket Trunk 1 for each Coupler Trunk Motor Trunk Motor Bracket
PARTS
Item# Part #
999-1841 999-1827 999-1847 999-1842 999-1843 999-1759 999-1844 999-1845 999-1846 COIDNAARWNHE Description Notes
Head Cam Opto Coupler 2 on bracket Opto Coupler Bracket Head Head Motor Bracket Elephant Main Frame Head Motor Up/Down Motion Elephant Main Post Interrupter Opto Bracket Opto Coupler Bracket Body 3 of them
Item# Part #
CIDNARWH D Bi
iS Ow fesiues Bes Mandl coll coil esi es] escription earing Bracket Bearing Bearing Holder Bucket Shaft and Plate Bucket Motor Bucket Support Brace aft Coupler ucket Motor Bracket race Mount lephant Center Shaft lephant Motor Bracket lephant Motor lephant Motor Coupler eavy Bearing lephant Shaft Frame lephant Frame Brace lephant Main Post Visable U Shaped Bracket
Flat Plate on Top
1 on each side
Side to Side Motion
- WIRE COLOR CODE TABLE
THE WIRE COLOR CODE is as follow:
PINK
SKY BLUE
BROWN
PURPLE
LIGHT GREEN moawe
Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric characters.
NO TRACE
RED
BLUE
YELLOW
GREEN
WHITE
ORANGE
BLACK
GRAY CaorndurEwBnNBO
If the right-hand side numeral of the code is 0, then the wire will be of a single color shown by the left-hand side numeral (see the above).
<Example> 51......... WHITE / RED
RED WHITE
U: AWGI16
K: AWGI18
L: AWG20
None: AWG22
- INPUT PORT ASSIGNMENTS
P9 - 34 pos. Ultrex connector
| Color Code | Pin | Bit Access | Description |
| 90 | AlO | BIT6 | Push Button Switch |
| DO | B10 | BIT7 | Test Button Switch |
| 95 | All | BIT8 | Volume Up Switch |
| 93 | Bll | BIT9 | Volume Down Switch |
| 98 | Al2 | BIT 10 | Coin Switch |
| DI | B12 | BIT 11 | Nose Open Sensor |
| D2 | Al3 | BIT 12 | Nose Close Sensor |
| 71 | B13 | BIT 13 | Elephant Left Sensor |
| 72 | Al4 | BIT 14 | Elephant Home Sensor |
| 78 | Bl4 | BIT 15 | Elephant Right Sensor |
| 51 | AlS | BIT 16 | Head Up Sensor |
| 52 | BI5 | BIT 17 | Head Down Sensor |
| 58 | Al6 | BIT 18 | Bucket Turn Sensor |
| 53 | B16 | BIT 19 | Prize Sensor |
| 5D | BI7 | BIT 20 | Meter Current Sensing |
- OUTPUT PORT ASSIGNMENTS
P9(I/O) - 34 pos. Ultrex connector
| Color Code | Pin | Bit Access |
Description
| 20 | Al | OUTPORT 6 BIT 0 | Left Motor |
| 28 | Bl | OUTPORT 6 BIT 1 | Right Motor |
| 21 | A2 | OUTPORT 6 BIT 2 | Up Motor |
| 23 | B2 | OUTPORT 6 BIT 3 | Down Motor |
| 24 | A3 | OUTPORT 6 BIT 4 | Open Motor |
| 2D | B3 | OUTPORT 6 BIT 5 | Close Motor |
| DC | A4 | OUTPORT 6 BIT 6 | Ears Motor |
| 29 | AS | OUTPORT 6 BIT 8 | Disable Motors |
| 5D | BS | OUTPORT 6 BIT 9 | Prize Meter |
| 59 | A6 | OUTPORT 6 BIT 10 | Coin Meter |
| 97 | Bo | OUTPORT 6 BIT 11 | Coin Lock |
P4(Multiplexed Lamp Sinks) - 18 pos. KK-100 connector
| Color Code | Pin | Bit Access | Description |
| 5C | 1 | LCO | Button Lamp Sink |
| 3D | 2 | LCcl | Bin 1 Lamp Sink |
| 37 | 3 | LC2 | Bin 2 Lamp Sink |
| 39 | 4 | LC3 | Eye | Lamp Sink |
| 35 | 5 | LC4 | Eye 2 Lamp Sink |
| 6 | LC5 | Button Lamp Sink Backup | |
| 7 | LC6 | Bin 1 Lamp Sink Backup | |
| 8 | LC7 | Bin 2 lamp Sink Backup | |
| 9 | LC8 | Eye | Lamp Sink Backup | |
| 10 | LCc9 | Eye 2 Lamp Sink Backup |
P6(Multiplexed Lamp Source) - 16 pos. KK-100 connector
Button Lamp Source Backup Bin 1 Lamp Source Backup Bin 2 Lamp Source Backup Eye 1 Lamp Source Backup
| Color Code | Pin | Bit Access | Description |
| 3C | 1 | BIT 1 | Button lamp Source |
| 31 | 2 | BIT2 | Bin 1 Lamp Source |
| 34 | 3 | BIT3 | Bin 2 Lamp Source |
| 32 | 4 | BIT4 | Eye | Lamp Source |
| 38 | 5 | BITS | Eye 2 Lamp Source |
6 BIT 6 7 BIT7 8 BIT8 9 BIT9 10 BIT 10 Eye 2 Lamp Source Backup
P10(Loudspeakers) - 5 pos. KK-100 connector
Channel 2 mixed input
| Color Code Pin | Name | Description | |
| DO | 1 | LS1+ | Channel 1 Jumper |
| DO | 3 | MIX | |
| DS | 4 | LS2+ | Channel 2 |
| D3 | 5 | LS2- | Channel 2 |
P5(Multiplexed L.E.D.’s) - 32 pos. Ultrex connector
| Color Code | Pin | Bit Access | Description |
| 40 | Al | DIGIT 0 | Common Cathode |
| 41 | AQ | SEG 0 | Segment 0 |
| 42 | B9 | SEG 1 | Segment | |
| 47 | Al0 | SEG 2 | Segment 2 |
| 4C | B10 | SEG 3 | Segment 3 |
| 48 | All | SEG 4 | Segment 4 |
| 4D | Bll | SEG 5 | Segment 5 |
| 45 | Al2 | SEG 6 | Segment 6 |
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.
n ould the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.
SEGA AMUSEMENTS USA, INC.
45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax