CATHODE RAY TOMES

Cart Fury Dedicated 39in

CART Fury Championship Racing (ver 1.00) (Midway Games, 2000) · Manual · 108 pages · 33 sections · original scan

Page 1

MAY 2000 G/DMIDWAY Pe

Game Operations Manual for 39" Dedicated Video Game

c€

Wiring Diagrams * Testing & Problem Diagnosis Manual Includes Operation & Adjustments Parts Information

The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of any federal, state or local law or regulation of the United States or any foreign country governing gaming devices. All operators of this game are responsible for its operation in accordance with such laws and regulations. The manufacturer's factory settings for this game may require adjustment in order to comply with laws applicable in an operator's specific jurisdiction. It is the operator's responsibility to determine whether adjustments are necessary and, if they are, to make the appropriate adjustments prior to operating the amusement game.

MIDWAY AMUSEMENT GAMES, LLC 3401 NORTH CALIFORNIA AVENUE CHICAGO, ILLINOIS 60618 USA http://www.midwaygames.com

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

DECLARATION OF CONFORMITY

MIDWAY AMUSEMENT GAMES LLC

3401 N. CALIFORNIA AVE. CHICAGO, IL 60618 U.S.A.

WE, HEREBY DECLARE UNDER SOLE RESPONSIBILITY THAT

THE MODEL: "c.4.2.7. FURY"39" 40295, 40395, 40495, 40795, 40995, 41095, 41195, 41295, 41395, 41495, 41895, 41995, 42095, 42195, 42295, 42395, 47195, 47295

TO WHICH THIS DECLARATION RELATES IS IN CONFORMITY WITH THE FOLLOWING EUROPEAN PRODUCT SAFETY DIRECTIVES:

ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (89/336/EEC AND AMENDMENTS 91/C162/08, 92/31/EEC,93/68/EEC)

ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN

CERTAIN VOLTAGE LIMITS DIRECTIVE

(73/336/EEC AND AMENDMENTS 88/C168/02, 92/C210/01, 93/68/EEC, 94/C 199/03, 95/C214/02)

AS IS VERIFIED BY COMPLIANCE WITH THE FOLLOWING STANDARDS:

EN55014: 1993 EN61000-4-2: 1995 EN61000-4-3: 1995 EN61000-4-4: 1995 EN61000-4-5: 1995 EN61000-4-6: 1995 EN61000-4-11: 1994 EN61000-3-2: 1995 EN61000-3-3: 1995 EN60335-1: 1995 TEC 60335-2-82: 1999

Date issued: MAY 19, 2000

Ce A BLE

CORPORATE V.P. OF QUALITY

Page 4

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 5

CABINET LINKING INSTRUCTIONS

To link two cabinets, use the crossover coupler included in the spare parts bag. Con- Se nect the factory installed linking cable to the coupler and follow the instructions for “Wiring Modifications and Software Setup” located below starting with step #7.

To link three or more cabinets, use a standard 10 base-T ethernet hub and follow all of the instructions for “Wiring Modifications and Software Setup” located below.

CABINET ARRAYS To create a Video Game Machine (VGM) Array, join the cabinets together. Each VGM comes equipped with the necessary hardware to connect cabinets and provide maximum stability. Hardware is located in the spare parts bag inside the cash box.

To join cabinets, remove the flat-head carriage bolts from the top and rear of adjacent cabinet sides. Position cabinets next to one another and adjust the leg levelers until all holes are aligned. Insert long carriage bolts through the holes in both cabinets, and then fasten in place with the nuts provided.

NETWORK CONSIDERATIONS Each VGM comes complete with a factory installed network cable. Optionally, a hub can be installed and located remotely to monitor network activity. Cables up to 328 ft., or 100 meters, in length may be used in conjunction with the hub provided they are Category 3 or higher, 100 ohm unshielded twisted pair communications grade wiring. Standard telephone cables are not sufficient for this application and should not be used.

Take care to protect exposed wiring from player foot traffic, cleaning crews, service personnel, etc. Use approved conduit or wire channels to support cables. Please note that modular connectors do not have strain relief.

Prevent linking cables from becoming damaged by avoiding sources of extreme heat or moisture, and high amounts of electrical energy like neon signs, fluorescent fixtures, two-way radios, cordless phones, power circuits, public address system wiring, etc.

Universal RJ-45 modular plugs are not numbered or coded in any way. Clearly label all network connections to avoid confusing network cables with computer or telephone circuits.

WIRING MODIFICATIONS AND SOFTWARE SETUP

  • Place the linking hub inside the base of a cabinet nearest the center of the array. Remember that the crossover couplers supplied with the game are not used when creating an array using the hub. Crossover couplers are only used to link two cabinets.
  • Unlock and remove the rear door from the cabinets selected to be part of the array. Inside the cabinet you will find a coil of linking cable with one end already attached to game electronics. Uncoil just enough of the cable to reach the hub, then recoil the rest of the cable and tie it in place. Repeat this procedure for each of the other cabinets. Do not reinstall the cabinet door(s) at this time.
  • Route the free end of each cable out through the notch located in the rear door opening and plug into any jack on the rear panel of the linking hub. Route the free end of the AC adapter for the hub and plug it into the 9VAC jack on the front panel of the hub. Now all of the cables can be connected to the hub.

C.A.R.T. FURY v

Page 6

Refer to the manufacturer's instructions in order to set the hub switches for LNK (link) and X (crossover) activity.

Fasten the hub to the bottom of the most central cabinet using a hook-and-loop type material. Orient the hub so that the indicator lights are visible and cable jacks are accessible.

Make sure excess cable is tied into a coil and that all cables are routed through the notch in the rear door. Connect the AC adapter for the hub and all line cords to AC power.

CAUTION uN Do not connect or disconnect any cable to the game electronics or hub with the power turned on. Circuit disruptions may damage the game and void the warranty.

Switch on power and closely observe the screen for each cabinet during start up. Each automatically enters ATTRACT MODE if no errors are found. Refer to Troubleshooting in the operation manual if errors are detected.

Unlock the coin door for each cabinet to access the operator control buttons inside coin vault. Press and hold the TEST button to enter the menu system.

-Verify linked games have compatible software versions. Newer versions may contain instructions previous versions do not, causing games to halt or reset at random.

Select ADJUSTMENTS from the Main Menu screen, then scroll to the ADDITIONAL ADJUSTMENTS MENU and press the Test button. Select GAME LINK NUMBER and press Test. Assign a linking number ranging from 1 to 4 to each game cabinet.

NOTE: Each cabinet must have its own individual and unique number. The first cabinet on the left is always cabinet 1, the second is cabinet 2, etc.

. Repeat these steps for each remaining game cabinet you wish to link.

. Close and lock the coin door, and reinstall and lock the rear door for each cabinet. Lower the leg levelers for each cabinet until the casters do not touch the floor and the cabinets are level. Lock the levelers in position by tightening the nuts provided.

vi Mipway AMUSEMENT Games, LLC

Page 7

CHAPTER ONE

OPERATIONS

Page 8

CHAPTER 1 OPERATION

SAFETY INSTRUCTIONS The following safety instructions apply to operators and service personnel. Read these instructions before servicing or preparing the Video Game Machine (VGM) for play. Other safety instructions appear throughout this manual.

DEFINITIONS OF SAFETY TERMS + DANGER indicates an imminent hazard. If you fail to avoid this hazard, it WILL cause death or serious injury. + WARNING indicates a potential hazard. If you fail to avoid this hazard, it COULD cause death or serious injury. + CAUTION indicates a potential hazard. If you fail to avoid this hazard, it MAY cause minor or moderate injury. CAUTION also alerts you about unsafe practices. + NOTE indicates information of special importance.

WARNING: TRANSPORTING GAMES. The VGM contains glass and fragile electronic devices. Use appropriate care when transporting. Avoid rough handling when moving the cabinet. Do not move with the power switched on.
WARNING: DISCONNECT POWER. Always turn the power OFF and unplug the VGM before attempting service or adjustments unless otherwise instructed. Installing or repairing boards with power switched on can damage components and void the warranty.
WARNING: GROUND GAMES. Avoid electrical shocks! Do not plug in a VGM until you have inspected and properly grounded it. Only plug this game into a grounded, three-wire outlet. Do not use a “cheater” plug, or cut off the ground pin on the line cord.
WARNING: AVOID ELECTRICAL SHOCKS. The VGM system does not utilize an isolation transformer. Internal cabinet AC is not isolated from the external AC line.
WARNING: HANDLE FLUORESCENT TUBE AND CRT WITH CARE. If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly eight feet or more from the implosion.
CAUTION: CHECK POWER SELECTOR, LAMP. Set the 115/230VAC selector on the power supply for the correct line voltage. Check the selector setting before switching on the VGM. Verify that the fluorescent lamp assembly is correct for the local line voltage.
CAUTION: USE PROPER FUSE. Avoid electrical shock! Replacement fuses must be identically rated. Fuse voltage and current ratings must be identically rated to the original fuse. Po PRB Br
CAUTION: ATTACH CONNECTORS PROPERLY. Be sure board connectors mate properly. If connectors do not slip on easily, do not force them. A reversed connector may damage the VGM and void the warranty. Connector keys only allow a connector to fit one set of pins on a board.

MIDWAY AMUSEMENT GAMES, LLC

Page 9

CHAPTER 1 OPERATION

CAUTION: USE CARE WHEN SHIPPING HARD DISKS. The hard disk drive must be packed in an anti-static bag. When shipping the drive for repair or replacement, pack it in an approved container (P/N 08-8068). Do not stack or drop hard disk drives.
WARNING: HAZARD TO EPILEPTICS. A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g., seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.

Page 10

CHAPTER 1 OPERATION

PRODUCT SPECIFICATIONS

Operating Requirements

Location Electrical Power Temperature Humidity

Domestic 120VAC @ 60Hz 4.0 Amps 32°F to 100°F Not to exceed 95% relative Foreign 230VAC @ 50Hz 2.0 Amps (0°C to 38°C) Japan 100VAC @ 50Hz 4.0 Amps

Cabinet Statistics

Shipping DimensionsShipping Weight (Approx.)Design Type
Width 40" (101.6 cm)600Lbs (272kg) Main CabinetSit-In Dedicated Video Game
Depth 95" (241.3 cm)200Lbs (90kg) Control Cab.Machine with Steering Wheel
Height 86" (218.4 cm)125Lbs (57kg) Seat Assy.Feedback

Game Characteristics

Player VariablesOperator VariablesDiagnostics
1 to 4 players per VGM (with Linking)Coinage, Play Mode, Difficulty,Automatic Power-Up Self-Test
High Score RecognitionVolume, Audits, StatisticsManual Multi-Level Menu System

Suitable for All Ages (AAMA Certified)

Equipment Characteristics Video Display Monitor Medium Resolution RGB 39” (99 cm) CRT

Audio System Digital Stereo 5” (12.7 cm) Coaxial Full Range Speakers

Currency Acceptors 2 Coin Mechanisms Dollar Bill Validator Ready Electronic Coin Acceptor Ready

PRODUCT CONFIGURATION

Stand Alone Video Game Machine Each VGN is ready to play right out of the box. Operators may use the menu screens in the game menu system to determine some player variables in advance or leave the choices up to the players.

Linked Video Game Machines Linking allows players to compete against each other on a single course. Operator menus are used the same way as in stand-alone VGMs. Crossover couplers and linking cables to connect two VGMs are factory installed. Use an optional 10 base-T ethernet hub to interconnect up to four VGMs.

4 MIDWAY AMUSEMENT GAMES, LLC.

Page 11

CHAPTER 1 OPERATION

VIDEO GAME MACHINE ARRAY

SET-UP 1. Remove all items from the shipping containers and set them aside. Remove all packing material. Inspect the exterior of the main cabinet, control cabinet and the seat pedestal for any damage.

WARNING J The cabinet is top heavy. Do not push against plastic parts during movement.

Remove the keys from the steering wheel. Unlock and open the rear door, and the coin and cash boxes. Electrical cords, mechanical components, and assorted spare parts are packed inside the cash box.

Install one nut onto each leg leveler. Tilt as needed to locate four threaded holes under both the main cabinet and control cabinet, and three holes under the pedestal. Install a leveler and nut into each hole. Do not tighten nuts at this time.

The main cabinet is mounted on four swivel casters. Roll the cabinet to its intended location, maintaining clearance between the cabinet and walls, drapes, other games or obstructions. Roll the control cabinet near the main cabinet, leaving enough space to attach the wiring harness. Mate each cable from the control cabinet to the main cabinet. Press firmly, but do not force, the keyed connectors to seat the contacts. Slide the control cabinet toward the main cabinet between the mounting brackets, guiding the harness and cables into the main cabinet.

Page 12

CHAPTER 1 OPERATION

  • Roll the pedestal section near the control cabinet, leaving enough space to attach the wiring harness. Mate cables between the pedestal and the control cabinet. Press firmly, but do not force, the keyed connectors to seat the contacts. Ensure no wires are pinched during pedestal attachment.
  • Align the opening in the pedestal with the ends of the rails. Slide the pedestal forward onto extended mounting rails and align the holes. Attach pedestal assembly using 1/4-20 tamper resistant screws and large flat washers. A T27 wrench is included with the spare parts to tighten these screws firmly. Tighten the hex head bolts after the tamper resistant screws have been tightened. ‘ | vomit :

LOCATION OF PEDESTAL ASSEMBLY MOUNTING HOLES

  • Lower and adjust each leg leveler until the pedestal section is stable and level. Adjust the levelers until the bottoms of all pieces are flush and parallel with each other. Inspect for binding or pinched wires. Insert and firmly tighten the remaining fasteners to attach the two pieces together as a single unit.
  • An extra padlock may be installed to secure the rear door. A hasp is located in the spare parts bag. Remove the two lock bracket nuts from inside the cabinet, above the rear door opening. Slide the hasp bracket onto the bolts so that it protrudes from the hole in back of the cabinet, then reinstall nuts.
  • Modify the lock plate at the top of the rear door. Remove the bolts and nuts from the lock plate, then rotate the plate so that the slot will be above the door. Reinstall the bolts and nuts and tighten firmly.

REAR HASP INSTALLATION

Page 13

CHAPTER 1 OPERATION

12. Reinstall the rear door onto the cabinet and close it. Lock the rear door and remove the key. If required, install the extra padlock through the hasp at this time. Install the screws at the top and sides of the rear door and tighten snugly. Leave the remaining doors open at this time.

. The power cord is packed in with the spare parts. Insert a portion of the line cord in the cord clamp leaving enough slack for the cord. Match the holes on the IEC plug with the prongs in the receptacle and push firmly to seat the line cord.

LINE CORD INSTALLATION

. Plug the game into a grounded (3-terminal) AC wall outlet. Switch on power to the game using the ON/OFF switch located on the upper left top of the cabinet (when viewed from the player’s position). The game will power up and begin its self test. If no errors are found, the game will automatically enter the attract mode of operation (scenes and sounds from typical races, player’s scores, messages, etc.).

. Open the coin door. Press and hold the Begin Test button on the operator control switch panel to enter the menu system. Wait until the Main Menu screen appears on the monitor.

TYPICAL COIN DOOR SWITCH LOCATION

Follow on-screen instructions to select Diagnostics, then choose SWITCH TEST. Follow the onscreen instructions to verify that each of the controls is operational. If no errors are found, the controls should function well.

. Return to the Diagnostics screen, then choose SPEAKER TEST. Follow the on-screen instructions to verify that each of the speakers is operational. If no errors are found, the audio should function well.

MIDWAY AMUSEMENT GAMES, LLC.

Page 14

CHAPTER 1 OPERATION

  • Return to the Diagnostics screen, then choose WHEEL FEEDBACK TEST. Follow the on-screen instructions to verify the presence of steering resistance. If no errors are found, the aim will be good.
  • Return to the Main Menu screen, then choose CONTROL CALIBRATION. Follow the on-screen instructions to set steering limits. If no errors are found, the controls will have the maximum accuracy.
  • Return to the Main Menu screen, and then choose EXIT. The game will automatically enter its “attract” mode of operation (scenes and sounds from typical races, player’s scores, messages, etc.).
  • Insert currency or tokens and play a game. Change the volume and make any other adjustments. Close and lock all open doors. Tighten the leveler nuts and engage the caster locks.

MAINTENANCE + Viewing Glass It is not necessary to switch off power to the game to clean the glass. Apply a mild glass cleaner to a clean cloth or sponge and wipe the viewing glass. Do not apply the cleaner directly on the glass! Liquid could drip down into switch or control circuits and cause erratic game operation.

+ Player Controls Use plastic-safe, non-abrasive cleaners to avoid damage. Apply cleaner to a clean cloth or sponge and wipe the player controls. Do not apply the cleaner directly on the controls!

  • Cabinet and Seat Use plastic-safe, non-abrasive cleaners to avoid damage. Apply cleaner to a clean cloth or sponge and wipe the seat or cabinet. Do not apply cleaner directly on artwork or cabinet!

GAME FEATURES C.A.R.T Fury: Championship Racing™ ships configured for one-player game play. Up to four cabinets may be linked to promote player competition.

C.A.R.T Fury™ is based on the Championship Auto Racing Teams, Inc. owned FedEx® Championship Series run yearly from March through October. CART races on road courses, temporary street circuits, oval tracks, and super speedways in five countries on four continents. The races are televised both domestically and around the world with a viewing audience of roughly over 57 million. Michael Andretti, Christian Fittipaldi, Juan Montoya and Jimmy Vasser are but a few of the drivers involved in the CART circuit.

C.A.R.T Fury: Championship Racing™ features a total of 12 tracks to choose from. There are 8 actual CART courses, as well as 4 fantasy courses. Each course is packed with highly realistic scenery, immersive physics and the most amazing wrecks and crashes. Additionally, players can opt to play a full 12-race season, with points awarded for winning positions!

STARTING UP Each time power is switched on or restored to the game machine, the system enters Start-up Tests. The software revision level is shown at the top of the screen. A status screen to report on network activity will appear for about ten seconds. This screen is used to verify and troubleshoot connections on an array of cabinets.

The system enters Attract Mode once it passes all power-up tests. The Attract Mode screen will cycle endlessly and display a variety of scenes and sounds from a typical race on any given track. The system does not exit Attract Mode until the desired amount of coins or tokens is inserted and game play commences.

Page 15

CHAPTER 1 OPERATION

NOTE: An error message appears on screen and the game does not enter start up if an error is detected during the Start-Up Test. Record any messages before attempting to service the game.

GAME RULES AND OBJECTIVES The game is configured for one-player game play, but up to four cabinets may be linked at one time to promote multiple player competition. To enter Game Mode, individual player(s) must insert the required amount of currency or tokens, press the Start button, and select a car and track. The main objective of the game is to earn top ranking against other drivers.

PLAYER CONTROLS + Start Button The start button is used to begin game play or to select certain features before a race.

+ Boost Button This button located on either side of the steering wheel provides extra boost while passing other cars during competition

+ View 1 Button This button shows the view from the driver’s seat inside the vehicle. This is a normal driver view.

+ View 2 Button This button shows the view from directly above. The player can see the front end of the vehicle.

+ View 3 Button This button shows an aerial view of the vehicle. This is what a helicopter camera would see.

+ Pedals The gas and brake pedals control vehicle speed.

+ Seat Position Adjuster The seat position may be changed at any time, even during competition. Pull the adjustment lever to the left while seated then slide the seat forward or backward. Release the lever to lock the seat into position.

GAME OPERATION Access to the menu system for statistics, adjustments, and testing is secured by a keyed lock to prevent tampering. When the menu system is entered, on screen messages guide the operator through tasks.

CABINET SWITCHES + The ON/OFF SWITCH is located on the top right side of the cabinet.

+ The REMOTE MONITOR ADJUSTMENTS are located inside the coin vault. Use the monitor test screens with these controls to adjust the video image size, brightness, contrast, etc.

+ The SLAM TILT SWITCH detects any forceful vibrations against the coin door. This eliminates pounding for free games. It is located on the inside of the coin door opening near the lock.

+ NOTE: The Slam switch is not present on Dollar Bill Validator (DBV) ready doors.

10 Mipway AMUSEMENT GAMES, LLC

Page 16

CHAPTER 1 OPERATION

CONTROL BUTTONS + The TEST BUTTON activates the game Menu System. Press the Test button to access the Main Menu and select individual diagnostics, audits, utilities, etc.

+ The VOLUME UP BUTTON moves up through the menu selections or adjustment items and raises the sound level in game play. A distinct sound accompanies the activation of this button.

+ The VOLUME DOWN BUTTON can be used to move down through the menu selections or adjustment items and to lower the sound level in game play. A sound will accompany the activation of this button.

+ The SERVICE CREDIT BUTTON is used to allot credits without affecting the game's bookkeeping total. This button is also used to get out of a menu selection or return to the main menu.

Page 17

CHAPTER 1 OPERATION

NOTES

12 Mibway AMUSEMENT GAMES, LLC

Page 18

CHAPTER TWO

ADJUSTMENT, DIAGNOSTIC & AUDIT MENUS

Page 19

CHAPTER 2 DIAGNOSTICS

ADJUSTMENT, DIAGNOSTIC & AUDIT MENUS

MENU SYSTEM

WHAT IS THE MENU SYSTEM? The game’s Menu System is a series of auditing, game adjustments and diagnostic screens. You can easily access and apply these screens to optimize game performance. For instance...

+ Use game audit screens to assess game performance. + Use adjustment screens to help you customize game performance. For example, you can restore factory default game settings. You can also calibrate player controls for player accuracy. + Use diagnostic screens to verify proper equipment operation.

ACCESSING THE MENU SYSTEM Open the coin door. Locate and press the TEST MODE switch. The game system will exit game Attract Mode and enter Diagnostic Mode. The system runs a brief self-test, and then displays the Main Menu. The Main Menu is the opening screen of the Menu System.

Game audits, adjustments and diagnostics are line items on the Main Menu. Selecting an item opens its submenu. Every submenu presents various options that you may act upon.

C.A.R.T. MAIN MENU

DIAGNOSTICS AUDITS ADJUSTMENTS VOLUME LEVEL CONTROL CALIBRATION UTILITIES EXIT TYPICAL MAIN MENU SCREEN

MENU LAYOUT Observe that each menu screen basically uses the same layout. The game ID, Serial Number, and Date of Manufacture will appear on most of the menu screens. These numbers will be helpful to factory personnel when referring to your game for parts or service.

  • The block at the top of each screen displays the current menu title. + Data, such as menu items and video reports, etc., appears in the center of the screen. + Messages, for example explanations and active control functions, etc., appear at the bottom of the screen.

MENU NAVIGATION TOOLS. Use the operator control buttons located inside the coin door to navigate menus. Press the Volume Up or Volume Down buttons to scroll through the menu options.

Notice the options sequentially become highlighted. Press the Test button to select a highlighted option and access the next menu level. NOTE: Only one highlighted option can be selected at a time.

To return to play mode, select Exit and press the Test button while in the Main Menu screen.

2 MIDWAY AMUSEMENT GAMES, LLC

Page 20

CHAPTER 2 DIAGNOSTICS

Diagnostics Menu

DIAGNOSTIC MENU To verify the condition of the electrical and electronic hardware in the game, select Diagnostics Menu at the Main Menu. Diagnostic tests assist you in checking and adjusting the game’s major systems. It is

important to periodically run diagnostics to improve and maintain game performance and player satisfaction.

DIAGNOSTICS

Use the Volume Up or Volume Down button to highlight the desired Diagnostic Menu option and press the Test button to enter.

Monitor Setup

MONITOR SET-UP To verify color clarity of the monitor, select MONITOR SETUP at the Main Menu.

Use the Volume Up or Volume Down button to highlight the desired monitor setting and press the Test button. Watch for the following results on-screen during this test.

MONITOR SET-UP

wo

Page 21

CHAPTER 2 DIAGNOSTICS

Main Menu Diagnostic Menu, continued Monitor Setup, continued

COLOR BARS. Observe 4 color bars in different shades appear on-screen as aids in adjusting the green, blue, and red color levels. Each color should appear sharp and clear. Check video brightness and contrast.

The CROSSHATCH PATTERNS test fills the screen with a series of dots within a grid. Observe the dots are perfectly round and that both the grid and dots are clear. Inspect monitor convergence, linearity, and screen size.

The single color screens, RED SCREEN, BLUE SCREEN, GREEN SCREEN, etc., fills the screen with a single color to be observed for complete saturation and clarity.

If any of the tests show a need for CRT adjustment, use the proper knobs on the Monitor Controls board.

Main Menu

Diagnostic Menu, continued System Information

SYSTEM INFORMATION To verify game serial number and date code select System Information at the Main Menu. Use the Start button or Test button to exit this menu screen.

SYSTEM INFORMATION

MIDWAY AMUSEMENT GAMES, LLC

MC VEGAS SYS SERIAL ANE ane DATE OF MANUFACTURE:09/09/99.

PRESS START TO EXIT TYPICAL SYSTEM INFORMATION SCREEN

Main Menu Diagnostic Menu, continued Sound Subsystem Test

SOUND SUBSYSTEM TEST To Verify proper operation of the sound electronics select Sound Subsystem Test at the Main Menu. Observe the following information on the screen.

4 MIDWAY AMUSEMENT GAMES, LLC

Page 22

CHAPTER 2 DIAGNOSTICS

Sound Subsystem Test, continued

SOUND SUBSYSTEM TEST

Disk Tests Menu

DISK TESTS To verify hard disk drive information and perform tests, select Disk Test at the Main Menu. Use the Volume Up and Volume Down buttons to highlight an item. Use the Test or Start button to select an item.

DISK TESTS

Select DISK INFORMATION to learn information about the IDE disk drive.

Select SEQUENTIAL READ to view the sequential sector read without the cache.

Select SEQUENTIAL CACHE READ to view the sequential sector read with the cache.

Select RANDOM READ to view the random sector read without the cache.

Select RANDOM CACHE READ to view the random sector read with the cache.

Select DATA INTEGRITY TEST to perform a disk data integrity test.

Select FILE SYSTEM CHECK to test the integrity of files on the disk.

Select SURFACE SCAN to perform a scan of the disk’s surface.

Page 23

CHAPTER 2 DIAGNOSTICS

Switch Tests Menu

SWITCH TESTS To verify proper operation of switch and button inputs in the game, select Switch Test at the Main Menu.

SWITCH TESTS

Use the Volume Up or Volume Down button to highlight the Switch Test option and press the Test button to access it. Press any switch on the control panel or coin door to cause the corresponding indicator on the screen to illuminate. Each illuminated square represents one completed switch circuit.

DIP Switch Test

DIP SWITCH TEST To verify the functionality of both 8-position DIP switches on the CPU Board, select DIP SWITCH TEST at the Main Menu. Observe immediate on-screen results by changing the setting on a switch.

Use the Volume Up or Volume Down button to highlight the DIP Switch Test option and press the Test button to access it. The current settings appear on-screen. Consult the table on the next page to determine if changes are required. The default switch positions are all OFF for standard operation.

A vertical bar next to the switch position column indicates a common switch function.

6 Mipway AMUSEMENT GAMES, LLC

Page 24

CHAPTER 2 DIAGNOSTICS

Main Menu Diagnostic Menu, continued DIP Switch Test, continued

DIP SWITCH TEST

DIP SWITCH U13 DIP SWITCH U12

8 OFF UNUSED 8 OFF GAME MODE 7 OFF UNUSED 7 OFF UNUSED 6 OFF USA 1 6 OFF BRAKE ENABLED 5 OFF USA 1 5 OFF UNUSED 4 OFF USA 13... 4 OFF UNUSED 3 OFF USA 1 3 OFF UNUSED 2 OFF USA 13... 2 OFF UNUSED 1 OFF DIP COINAGE 1 OFF UNUSED

PRESS ANY BUTTON TO EXIT TYPICAL DIP SWITCH SCREEN

Setting Table for DIP Switch U13

FUNCTION swi | Sw2 | Sw3 | SW4] SWs | Swe | SW7 | SW8 DIP COINAGE OFF CMOS COINAGE ON* USA 13 GERT FR ECAT UKi ECA OFF* | ofr. | OFF* USA 11 GER2 FR ECA2 UK2 ECA ON | Orr | OFF USA 10 GER3 FR ECA3 UK3 ECA OFF | ‘ON | OFF USA 1 GER4 FR ECA4 UK4 ON | ON | OFF USA DC8 GERS FR ECAS UK5 OFF | OFF | ON USA DC6 GER ECA1 FR ECA6 UK6 ECA ON | Orr | ON USA DC5 GER ECA2FR ECA7 UK7 ECA OFF | ON | ON USA DC1 GER ECA3 FR ECA8 ON | ON | ON FREE PLAY (UK) ON | on | ON USA OFF* | OFF* FRANCE ON | OFF GERMANY OFF | ON UK** ON | ON

DIP SWITCH SETTING FOR COINAGE There are many ways to select the type and quantity of currency recognized by the game machine.

  • The most common coin combinations for several countries are pre-programmed and may be selected from the table when Standard Pricing is activated (see Game Adjustments).
  • DIP Switch settings may be changed with the power switched on. Set any switch and then observe the screen to verify that the desired selection is enabled. NOTE: If CMOS Coin Settings are active, switch settings for an individual Country will have no effect.
  • Some European countries may accept currency used in other countries. The most popular coinage settings are listed beneath in the Pricing Table.
Page 25

CHAPTER 2 DIAGNOSTICS

Main Menu

Diagnostic Menu, continued

DIP Switch Test, continued

Setting Table for DIP Switch U12 (Factory default settings in boldface type)

FUNCTION swi sw2 SW3 SW4 SW5 SW6 SW7_~ SW8

UNUSED OFF ON

UNUSED OFF ON

UNUSED OFF ON

UNUSED OFF ON

UNUSED OFF ON

BRAKE ENABLED OFF BRAKE DISABLED ON

UNUSED OFF ON

GAME MODE OFF TEST MODE ON

Main Menu

Diagnostic Menu, continued

Lamp and LED Tests

LAMP & LED TESTS To verify the proper operation of lamps and LED’s, select the LAMP & LED TESTS at the Main Menu.

Use the Volume Up or Volume Down button to highlight Lamp & LED Test and press the Test button. During the test observe the selected lamp(s) switches turn on or off when the corresponding selection is made.

8 MIDWAY AMUSEMENT GAMES, LLC

Page 26

CHAPTER 2 DIAGNOSTICS

Lamp Tests

LAMP TESTS To detect intermittent or faulty incandescent bulbs, select LAMP TEST at the Main Menu. This test ensures that the incandescent bulbs critical to game operation function properly.

LAMP TEST

Use the Volume Up or Volume Down button to highlight Lamp Test and press the Test button. During the test observe the Lamp(s) turn ON according to the option selected.

LED Tests

LED TESTS To verify that the LED’s function properly, select LED TEST at the Main Menu. This test allows you to control and test the illumination of the LED's located on the dash PCB.

LED DISPLAY TESTS

Use the Volume Up or Volume Down button to highlight LED Test and press the Test button. During the test observe the LED’s turn ON.

Page 27

CHAPTER 2 DIAGNOSTICS

Wheel Feedback Test

WHEEL FEEDBACK TEST To verify the proper directional movement of the steering wheel, select Wheel Feedback Test at the Main Menu. Make sure hands and other objects are clear of the steering wheel when this test is selected because the steering wheel automatically rotates on its own.

Use the Volume Up or Volume Down button to highlight Wheel Feedback Test and press the Test button.

WHEEL FEEDBACK TEST

Observe and follow the on-screen instructions for conducting the test. During the test observe the steering wheel is turned automatically. Upon completion of the test, the message TEST COMPLETE appears onscreen. Press the Test or Start button to exit test once this message appears.

Control Test

CONTROL TEST To verify the presence of steering wheel control, gas pedal and brake pedal control, select Control Test at the Main Menu.

Use the Volume Up or Volume Down button to highlight Control Test and press the Test button. During the test observe the selected control input or switch turns on or off when the corresponding selection is made.

NOTE: Information regarding the brake pedal will not appear if DIP 6 on DIP Switch U12 is ON.

CONTROL TEST

10 Mibway AMUSEMENT GAMES, LLC

Page 28

CHAPTER 2 DIAGNOSTICS

Speaker Test

SPEAKER TEST To verify proper operation of the sound components, select Speaker Test at the Main Menu. This test allows you to access and listen to the sound emitted from the speakers used in the game.

SPEAKER TEST

Use the Volume Up or Volume Down button to highlight the Speaker Test option and press the Test button. Use the Volume Up or Volume Down button to highlight an option within the test itself and press the Test button to activate the test option.

Link Test

LINK TEST To verify communications between the game machine and others connected to it, select Link Test at the Main Menu.

LINK TEST

Use the Volume Up or Volume Down button to highlight Link Test and press the Test button. This test runs automatically and will display results on-screen.

Press the Test button to exit from this menu screen.

Page 29

CHAPTER 2 DIAGNOSTICS

Game Audits ss AUDITS Press the Volume Up or Volume Down button to highlight Game Audits in the Main Menu and press the Test button. To move between pages in an Audit Table, press the View 1/Volume Up or View 2/Volume Down button. Press the Test or Start button to return to the Main Menu from this screen.

AUDITS

The Game Audits Table displays the play statistics. The left side of the table names the Audit item; the right side shows the amount of play. Record these statistics before any service or repairs are done.

Coin Audits |

COIN AUDITS To keep track of the number of coins collected, press the Volume Up or Volume Down button to highlight Coin Audits in the Main Menu and press the Test button. To move between pages in an Audit Table, press the View 1/Volume Up or View 2/Volume Down button. Press the Test or Start button to return to the Main Menu from this screen.

COIN AUDITS

AUDIT TABLE, PAGE 1

12 Mibway AMUSEMENT GAMES, LLC

Page 30

CHAPTER 2 DIAGNOSTICS

Credits Audits

CREDITS AUDITS To keep track of the available number of credits, press the Volume Up or Volume Down button to highlight Credits Audits in the Main Menu and press the Test button. To move between pages in an Audit Table, press the View 1/Volume Up or View 2/Volume Down button.

CREDITS AUDITS

AUDIT TABLE, PAGE 1

General Game Audits

GENERAL GAME AUDITS To keep track of the game play statistics, press the Volume Up or Volume Down button to highlight General Game Audits in the Main Menu and press the Test button. To move between pages in an Audit Table, press the View 1/Volume Up or View 2/Volume Down button.

GENERAL GAME AUDITS

Page 31

CHAPTER 2 DIAGNOSTICS

Player Selection Audits

PLAYER SELECTION AUDITS, To keep track of game play choices like race venue, character selection, car selection and handling options, press the Volume Up or Volume Down button to highlight Player Selection Audits in the Main Menu and press the Test button.

To move between pages in an Audit Table, press the View 1/Volume Up or View 2/Volume Down button.

PLAYER SELECTION AUDITS

PLAYER SELECTION AUDITS

14 Mipway AMUSEMENT GAMES, LLC

Page 32

CHAPTER 2 DIAGNOSTICS

Player Selection Audits, continued

PLAYER SELECTION AUDITS

Exception Dump Audit

EXCEPTION DUMP AUDIT To display cause, PC, and register audits, press the Volume Up or Volume Down button to highlight Exception Dump Audits in the Main Menu and press the Test button. To move between pages in an Audit Table, press the View 1/Volume Up or View 2/Volume Down button. NOTE: If no exceptions are available none will be displayed as shown below.

EXCEPTION DUMP AUDITS

Track Audits

TRACK AUDITS To view track statistics, press the Volume Up or Volume Down button to highlight Track Audits in the Main Menu and press the Test button. To move between pages in an Audit Table, press the View 1/Volume Up or View 2/Volume Down button.

Page 33

CHAPTER 2 DIAGNOSTICS

Track Audits, continued

TRACK AUDITS

SAMPLE TRACK AUDITS PAGE

NOTE: There is an individual page of track statistics for each track showcased in the game.

Clear Audits

CLEAR AUDITS Clear Audits displays an assortment of audit clearing options. One or all audit tables can be cleared using this audit screen. You may wish to record some or all of the statistics before clearing an audit table, due to any reason, for future reference.

CLEAR AUDITS

16 Mipway AMUSEMENT GAMES, LLC

Page 34

CHAPTER 2 DIAGNOSTICS

Main Menu

Audits, continued

Clear Audits

Each of the menu options beneath Clear Audits presents a confirmation box, like the one shown below, which offers you the choice of accepting or declining the selected action. Press the Volume Up or Volume Down button to highlight the desired response and press the Test button. A confirmation box will appear to confirm that the desired action has been carried out.

ARE YOU SURE YOU WANT TO CLEAR CREDITS?

YES NO.

TYPICAL CLEAR AUDITS BOX

Main Menu

Adjustments Menu

ADJUSTMENTS MENU To optimize game performance and earnings or to change the look or sound of the game, select the Adjustment Menu at the Main Menu. The Attract Mode features, Game Pricing and Game Difficulty may also be customized. Free races may be awarded to encourage players. Free game player incentives may reduce earnings. NOTE: Individual Game Adjustments are explained in more detail on the following pages.

Press the Volume Up or Volume Down button to highlight the desired Adjustments Menu option on the Main Menu and press the Test button. Use these screens to optimize game performance and earnings.

ADJUSTMENT MENU

PRICING FREE PLAY ATTRACT SOUND ADDITIONAL ADJUSTMENTS. FULL FACTORY RESTORE EXIT

The Adjustments Menu offers several options. Press the Volume Up or Volume Down button to highlight an option and press the Test button. Each time an option on the menu is activated you are provided with multiple setting choices.

Use the Volume Up or Volume Down button to change the current value setting and observe a confirmation box as shown appears.

Page 35

CHAPTER 2 DIAGNOSTICS

Adjustments Menu

ARE YOU SURE YOU WANT TO SELECT THIS PRICING?

TYPICAL CONFIRMATION BOX

Press the Volume Up or Volume Down button to select YES or NO, then press the Test button to lock in the setting. Selecting NO cancels any changes values and returns the previous values to memory.

Pricing

PRICING MENU Use the Pricing Menu to specify pricing settings other than the ones listed in the Pricing Table. Pricing can also be used to select the amount of credits required to start a game and the amount of credits required to continue a game. This option is adjusted from the Dip Switch Settings.

PRICING MENU

18 Mipway AMUSEMENT GAMES, LLC

Page 36

CHAPTER 2 DIAGNOSTICS

Main Menu

Adjustments, continued

Pricing Table, continued

Use the Pricing Table illustrated below as a guide to select and/or verify the desired coin credit setting(s).

NAMESTART|CONTINUE[CREDITS/COINCOIN1|COIN2|COIN3|COIN4JBILL
ANTILLES221/25¢, 4G.25¢1G
AUSTRALIA 122113X206, 2/$1.00.20¢$1.00
AUSTRALIA 2111/5X20¢, 1/$1.0020¢$1.00
‘AUSTRIA 1221/8Sch, 2/10Sch5 Sch10 Sch
AUSTRIA 2221/2XSch, 3/2X10Sch5 Sch10 Sch
BELGIUM 1221/20BF20BF20BF
BELGIUM 2223/20BF20BF20BF
BELGIUM 3222/20BF20BF20BF
BELGIUM ECA221/20BF50BF20BFSBF
CANADA 1221/2x 25¢,3/$125¢25¢
CANADA 2221/2x25¢,3/$125¢$1.00
CANADA 3223/ $1.00, 6 / $2.00$1.00$2.00
CANADA ECA221/2x25¢,3/$125¢$1.00$2.00
DENMARK223/5DKr, 7/1 0DKr‘SDKr10DKr
FINLAND)221 Fmk1Fmk5Fmk
FRANCE 1222/5Fr, 5/10FrSFr10Fr
FRANCE 2212/5Fr, 4/40Fr5Fr10Fr
FRANCE 3211/5Fr, 3/10FrSFr10Fr
FRANCE 4211/8Fr, 21 0Fr5Fr10Fr
FRANCE 5212/SFr, S/10Fr, 11/2X10Fr| 5Fr10Fr
FRANCE 6212I5Fr, 4/10F r, 9/2 X 10Fr5Fr10Fr
FRANCE 72:11/5Fr, 3/10F r, 7/2 X 10FrSFr10Fr
FRANCE 8211/5Fr, 2/1 0F r, 5/2 X 10Fr5Fr10Fr
FRANCE 9211/3 X 1Fr, 2/5Fr1FrSFr
FRANCE 10211/2 X 1Fr, 3/5Fr1FrSFr
FRANCE 112:11/3 X 1Fr, 2/5Fr, 5/2X5Fr| 1FrSFr
FRANCE 12211/2. X 1Fr, 3/SFr, 7/2 X5Fr| 1FrSFr
FRANCE ECA 1112/5Fr, 5/10Fr1FrSFr10Fr20Fr
FRANCE ECA 2112/5Fr, 4/40Fr1FrSFr10Fr20Fr
FRANCE ECA 3111/5Fr, 3/10Fr1FrSFr10Fr20Fr
FRANCE ECA 4111/8Fr, 21 0Fr1FrSFr10Fr20Fr
FRANCE ECA 5112/5Fr, 5/10Fr, 11/2X 10Fr| 1FrSFr10Fr20Fr
FRANCE ECA 6112I5Fr, 4/10F r, 9/2 X 10Fr1FrSFr10Fr20Fr
FRANCE ECA 7111/5Fr, 3/10F r, 7/2 X 10Fr1FrSFr10Fr20Fr
FRANCE ECA 8111/5Fr, 2/10F r, 5/2 X 10Fr1FrSFr10Fr20Fr
FRANCE ECA 9111/3 X 1F r, 2/5Fr1FrSFr10Fr20Fr
FRANCEECA10 =|111/2 X 1Fr, 3/5Fr1FrSFr10Fr20Fr
FRANCE ECA 11111/3 X 1F r, 2/5Fr, S/10Fr1FrSFr10Fr20Fr
FRANCEECA12|111/2 X 1F r, 3/5Fr, 7/10Fr1FrSFr10Fr20Fr
FRANCEECA13—|111/0Fr, 2/20F r, 4/30Fr1FrSFr10Fr20Fr
FREE PLAY=NoneNoneNoneNoneNone
GERMANY 1221/1DM, 6/5DM1DMSDM
GERMANY 2211/1DM, 7/5DM1DM5DM
GERMANY 3211/1DM, 8/5DM1DM5DM
GERMANY 4211/1DM, 5/5DM1DM5DM
Page 37

CHAPTER 2 DIAGNOSTICS

NAME START |CONTINUE [CREDITS/COIN COIN1 |COIN2 |COIN3 |COIN4 JBILL

GERMANY 5 2 11/1DM, 6/5DM1DM 5DM

GERMANY ECA1 [2 2 1/1DM, 2/2DM, 6/5DM 1DM 20M 5DM

GERMANY ECA2 |2 1 1/1DM, 2/2DM, 6/5DM 1DM 20M 5DM

GERMANY ECA3 [1 1 1/1DM, 2/2DM, 6/5DM 1DM 20M 5DM

HUNGARY 2 2 2X1 0Ft, 3/2X20Ft 10Ft 20Ft

ITALY2 21/500LIt‘SOOLIt SOOLIt
JAPAN 1 2 21/100Yen700 Yen [100 Yen
JAPAN 2, 2 22/00Yen100 Yen | 400 Yen
JAPAN 3, 1 11/100Yen100 100
JAPAN 4. 1 12/00Yen100 100
JAPAN 5, 1 1alooYen100 100
JAPAN 6 1 11/2X100Yen100 100

NETHERLANDS 2 2 1/HFI, 3/2.5HFI THFI 2.5HFI

NEW ZEALAND 1/1 11/811 $2
NEW ZEALAND 2 |1 12181$1 $2

NORWAY 2 2 S/5NKr, 6/10NKr ‘SNKr 10NKr ‘SPAIN 1 2 2 1/100Pta, 6/500Pta yo0Pta—_[500Pta

SPAIN 2 2 2 1/100Pta, 5/500Pta 100Pta_—‘|500Pta ‘SWEDEN 2 2 1/3X18Kr, 2/5SKr 1SKr 5SKr

SWITZERLAND1 [2 21/1 SFr, 6/SSFr1SFr 5SFr
SWITZERLAND2 [2 21 SFr, 7/5SFr1SFr 8SFr
SWITZERLAND3 [2 21/1 SFr, 8/5SFr1SFr 5SFr
UKECA 1 1 11/80p, 3/£1.00£1.00 50p 20p 10p £2.00
UK ECA2 1 11/50p, 2/81.00£1.00 50p 20p 10p £2.00

UK ECA3 1 1 1/30p, 2/50p, 5/£1.00 £1.00 50p 20p 10p £2.00

UK 41 11/50p, 3/£1.00£1.00 50p
UKS1 11/50p, 2/81.00£1.00 50p

UK ECA6 1 1 1/30p, 2/50p, 4/£1.00 £1.00 50p 20p 10p £2.00

UK ECA7 1 13/£1.00£1.00 50p 20p 10p £2.00

UK ECA8 1 1 1/50p, 2/81.00, 4/£2.00 £1.00 50p 20p 10p £2.00

uUsA12 21/25625¢ 25¢$1.00
usa22 11/25¢25¢ 25¢$1.00
usa31 11/25¢25¢ 25¢$1.00
usa1 11/50¢, 3/$1.0025¢ 25¢$1.00
UsAS2 11/50¢, 4/$1.0025¢ 25¢$1.00
usaé1 11/50¢25¢ 25¢$1.00
usA71 11/50¢, 3/$1.0025¢ 25¢$1.00
usas2 21/50¢, 4/$1.0025¢ 25¢$1.00
usag3 21/25¢, 4/$1.0025¢ 25¢$1.00
Usa103 31/25¢, 4/$1.0025¢ 25¢$1.00
usa1t4 21/25¢, 4/$1.0025¢ 25¢$1.00
usa124 31/25¢, 4/$1.0025¢ 25¢$1.00
usA134 41/25¢, 4/$1.0025¢ 25¢$1.00
USA ECA 3 31/25¢, 4/$1.00$1.00 25¢ 10¢ 05¢ $1.00
USADC1 2 21/25625¢ $1.00$1.00
USA DC 2 2 11/25¢25¢ $1.00$1.00
USA DC3 1 11/25¢25¢ $1.00$1.00
USA DC 4 3 21/25¢, 4/$1.0025¢ $1.00$1.00
USA DC5 3 31/25¢, 4/$1.0025¢ $1.00$1.00
USA DC6 4 21/25¢, 4/$1.0025¢ $1.00$1.00
USA DC7 4 31/25¢, 4/$1.0025¢ $1.00$1.00
USA DCB 4 41/25¢, 4/$1.0025¢ $1.00$1.00

20 Mibway AMUSEMENT GAMES, LLC

Page 38

CHAPTER 2 DIAGNOSTICS

Free Play Menu

Free Play This option selects free play. The setting choices for this adjustment are: -Enable -Disable -Factory Setting: DISABLE

Attract Sound

Attract Sound This option selects the attract mode sounds. The setting choices for this adjustment are: -Enable -Disable -Factory Setting: ENABLE

Additional Adjustments Menu

ADDITIONAL ADJUSTMENT MENU To select and set any number of useful adjustments, select the Additional Adjustment Menu. Individual Additional Adjustments are explained in more detail on the following pages.

Press the Volume Up or Volume Down button to highlight the desired Additional Adjustments Menu option on the menu and press the Test button.

ADDITIONAL ADJUSTMENT MENU

Page 39

CHAPTER 2 DIAGNOSTICS

Game Link Number

Game Link Number This allows the game link number to be set. The setting range is: -Maximum: 4 -Minimum: 1 -Factory Setting: 1

Attract Mode Volume

Attract Mode Sound This selects the value and setting of the sounds heard during attract mode. The settings for this adjustment are: -Minimum: 0 -Maximum: 255 -Factory Setting: 100

Game Difficulty

Game Difficulty This determines the level of difficulty for the game. The setting range is: -Easiest -Easy -Normal -Hard -Hardest -Factory Setting: NORMAL

22 Mipway AMUSEMENT GAMES, LLC

Page 40

CHAPTER 2 DIAGNOSTICS

Single First Free Game

Single First Free Game This enables the single first free game option. The setting choices are: -Enable -Disable -Factory Setting: ENABLE

Linked First Free Game

Link First Free Game This enables the link first free game option. The setting choices are: -Off -Two Players -Three Players -Four Players -Factory Setting: OFF

Game Start Time

Game Start Time This adjusts the game start time. Use the View 1/View 2 buttons to select. The setting choices are: -Minimum: 30 -Maximum: 60 -Factory Setting: 50

Page 41

CHAPTER 2 DIAGNOSTICS

Extra Lap

Extra Lap This enables an extra lap of racing during a race. The setting choices are: -Enable -Disable -Factory Setting: DISABLE

Wheel Strength Menu

Wheel Strength Menu This selects the degree of wheel strength to be used for racing. The setting range is: -Very Light -Light -Normal -Heavy -Very Heavy -Factory Setting: Normal

Full Factory Restore

Full Factory Restore This allows the operator to restore all settings to the way they were when the game left the factory. The setting range is: -Enable -Disable -Factory Setting: Disable

Volume Level

VOLUME LEVEL To select a desirable volume level, select Volume Level at the Main Menu. Press the Volume Up or Volume Down button to highlight the Adjust Volume option on the Main Menu, then press the Test button. Remember that the minimum sound level is set under Game Adjustments.

Press the Volume Up button to increase, or the Volume Down button to decrease the sound level of the game. Press the Test button to lock the volume level at the selected value and return to the Main Menu.

24 Mibway AMUSEMENT GAMES, LLC

Page 42

CHAPTER 2 DIAGNOSTICS

Main Menu

Control Calibration

CONTROL CALIBRATION To calibrate the steering wheel and pedals, select Control Calibration at the Main Menu. Press the Volume Up or Volume Down button to highlight the Control Calibration option on the Main Menu, then press the Test button. Follow the instructions on screen.

Main Menu

Control Calibration, continued

CONTROL CALIBRATION

CENTER WHEEL AND PRESS START

WHEEL CENTER: XX

SAMPLE CALIBRATION SCREEN

Main Menu

Utilities

UTILITIES To clear bookkeeping memory and reset factory defaults, select Utilities at the Main Menu. Press the Volume Up or Volume Down button to highlight the Utilities option on the Main Menu, then press the Test button.

UTILITIES MENU

DUMP AUDITS CLEAR CREDITS CLEAR AUDITS RESET HIGH SCORES DEFAULT ADJUSTMENTS FULL FACTORY RESTORE EXIT

UTILITIES MENU

The Utilities Menu offers several options. Press the Volume Up or Volume Down button to highlight an option, then press the Test button. Each time an option on the menu is activated you are provided with multiple setting choices. Use the Volume Up or Volume Down button to change the current value setting and observe a confirmation box as shown below appears.

Page 43

CHAPTER 2 DIAGNOSTICS

Utilities, continued

ARE YOU SURE YOU WANT TO CLEAR CREDITS?

TYPICAL CONFIRMATION BOX

Press the Volume Up or Volume Down button to select YES or NO, then press the Test button to lock in the setting. Selecting NO cancels any changes values and returns the previous values to memory.

NOTE: Record the numbers before they are cleared. These values cannot be restored once erased.

Dump Audits

Dump Audits Press the Volume Up or Volume Down buttons to highlight the Dump Audits option on the Main Menu, then press the Test button. This dumps all audits to the serial port.

  • Yes
  • No
  • Factory Setting: NO

Clear Credits Menu

Clear Credits Press the Volume Up or Volume Down buttons to highlight the Clear Credits option on the Main Menu, then press the Test button. This returns all credit values to zero and removes credit amounts from memory.

  • Yes -No
  • Factory Setting: NO

26 Mipway AMUSEMENT GAMES, LLC

Page 44

CHAPTER 2 DIAGNOSTICS

Clear Audits Menu

Clear Audits This select from a menu of assorted audit values that can be returned to zero and remove total from memory, Press the Volume Up or Volume Down buttons to highlight the Clear Audits option, then press the Test button.

CLEAR AUDITS

Each time an option on the menu is activated you are provided with multiple setting choices. Use the Volume Up or Volume Down button to change the current value setting and observe a confirmation box as shown below appears.

Clear Audits Menu, continued

ARE YOU SURE YOU WANT TO CLEAR AUDITS?

TYPICAL CONFIRMATION BOX

Press the Volume Up or Volume Down button to select YES or NO, then press the Test button to lock in the setting. Selecting NO cancels any changes values and returns the previous values to memory.

Reset High Scores Menu

Reset High Scores Press the Volume Up or Volume Down buttons to highlight the Reset High Scores option on the Main Menu, then press the Test button. This deletes all high scores and removes player identities from memory.

  • Yes
  • No
  • Factory Setting: NO
Page 45

CHAPTER 2 DIAGNOSTICS

Default Adjustments Menu

Default Adjustments Press the Volume Up or Volume Down buttons to highlight the Default Adjustments option on the Main Menu, then press the Test button. This sets the adjustments back to their original values.

  • Yes
  • No
  • Factory Setting: NO

Full Factory Restore Menu

Full Factory Restore Press the Volume Up or Volume Down buttons to highlight the Full Factory Restore option on the Main Menu, then press the Test button. This returns every variable in the game to the original factory settings.

  • Yes -No
  • Factory Setting: NO

28 Mibway AMUSEMENT GAMES, LLC

Page 46

CHAPTER THREE

SERVICE

Page 47

CHAPTER 3 SERVICE

SAFETY INSTRUCTIONS The following safety instructions apply to operators and service personnel. Read these instructions before servicing or preparing the Video Game Machine (VGM) for play. Other safety instructions appear throughout this manual.

DEFINITIONS OF SAFETY TERMS. + DANGER indicates an imminent hazard. If you fail to avoid this hazard, it WILL cause death or serious injury. + WARNING indicates a potential hazard. If you fail to avoid this hazard, it COULD cause death or serious injury.

  • CAUTION indicates a potential hazard. If you fail to avoid this hazard, it MAY cause minor or moderate injury. CAUTION also alerts you about unsafe practices. + NOTE indicates information of special importance.
WARNING: TRANSPORTING GAMES. The VGM contains glass and fragile electronic devices. Use appropriate care when transporting. Avoid rough handling when moving the cabinet. Do not move with the power switched on.
WARNING: DISCONNECT POWER. Always turn the power OFF and unplug the VGM before attempting service or adjustments unless otherwise instructed. Installing or repairing boards with power switched on can damage components and void the warranty.
WARNING: GROUND GAMES. Avoid electrical shocks! Do not plug in a VGM until you have inspected and properly grounded it. Only plug this game into a grounded, three-wire outlet. Do not use a “cheater” plug, or cut off the ground pin on the line cord.
WARNING: AVOID ELECTRICAL SHOCKS. The VGM system does not utilize an isolation transformer. Internal cabinet AC is not isolated from the external AC line.
WARNING: HANDLE FLUORESCENT TUBE AND CRT WITH CARE. If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly eight feet or more from the implosion.
CAUTION: CHECK POWER SELECTOR, LAMP. Set the 115/230VAC selector on the power supply for the correct line voltage. Check the selector setting before switching on the VGM. Verify that the fluorescent lamp assembly is correct for the local line voltage.
CAUTION: USE PROPER FUSE. Avoid electrical shock! Replacement fuses must be identically rated. Fuse voltage and current ratings must be identically rated to the original fuse. Po « Pe BB re
CAUTION: ATTACH CONNECTORS PROPERLY. Be sure board connectors mate properly. If connectors do not slip on easily, do not force them. A reversed connector may damage the VGM and void the warranty. Connector keys only allow a connector to fit one set of pins on a board.

MIDWAY AMUSEMENT GAMES, LLC

Page 48

CHAPTER 3 SERVICE

CAUTION: USE CARE WHEN SHIPPING HARD DISKS. The hard disk drive must be packed in an anti-static bag. When shipping the drive for repair or replacement, pack it in an approved container (P/N 08-8068). Do not stack or drop hard disk drives.
WARNING: HAZARD TO EPILEPTICS. A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g., seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.

Page 49

CHAPTER 3 SERVICE

SERVICING Only qualified service personnel should perform maintenance and repairs. The product guidelines apply to all operators and service personnel. Specific notes, cautions, and warnings appear throughout the manual where they apply. We recommend that you read the SAFETY NOTICES section thoroughly before beginning service. NOTE: Always switch off power to the game machine before servicing.

To service the Marquee... Refer to Marquee Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the center control cabinet. Refer to service instructions for Control Cabinet. + Remove the hardware from the bracket along the bottom edge of the marquee housing. + Grasp the bracket and lift the marquee housing up. The hinged marquee housing uses a prop rod located inside the main cabinet to keep it extended during service. Remove the free end of the prop rod from its retaining clip and insert it in the rod bracket on the lower right side of the marquee housing. + Perform the desired repair or equipment replacement. To reinstall, unhook the prop rod and return it to the retaining clip. Slowly lower the marquee housing and thread the tension chain back into the main cabinet. + Fasten the marquee housing’s bracket in place with the screws provided.

FRONT PERSPECTIVE VIEW

MARQUEE SERVICE

To service the Backlit Marquee ... Refer to Marquee Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Lift open the Marquee Housing. Refer to service instructions for Marquee. + Reach up inside the opening toward the marquee artwork. The marquee artwork and marquee glass is held in place at the top and sides by spacers/brackets fastened with screws. + Remove the screws from each of the brackets. Set the screws and brackets aside until reinstallation. Lift the marquee artwork or marquee glass out of the housing. + Perform the desired repair or equipment replacement.

4 MIDWAY AMUSEMENT GAMES, LLC

Page 50

CHAPTER 3 SERVICE

To service the Fluorescent Light Assembly... Refer to Marquee Service illustration. Switch off the power to the game machine and unplug the AC line cord. Lift open the Marquee Housing. Refer to service instructions for Marquee. Reach up inside the opening in the cabinet and disconnect the power cable from the fluorescent light assembly. Loosen, but do not remove the screws fastening the assembly to the cabinet. Slide the assembly slightly forward to disengage the keyholes. Lift out the assembly. Perform the desired repair or equipment replacement.

To service the Fluorescent Lamp or Starter... Refer to Marquee Service illustration. Switch off the power to the game machine and unplug the AC line cord. + Lift open the Marquee Housing. Refer to service instructions for Marquee. + Reach up inside the opening in the cabinet and remove the fluorescent lamp locks. Both the fluorescent tube and the starter require a quarter turn for removal. Grasp the tube or starter, give it a quarter turn and pull it from its socket. Carefully place a new starter or tube into the sockets and rotate it a quarter turn to reinstall. Reinstall both fluorescent lamp locks. Clean the tube to remove fingerprints and dust.

WARNING uN Fluorescent tubes implode on impact when dropped. Use care in handling.

To service the Cabinet Speakers... Refer to Marquee Service illustration. Speakers are located on the underside of the marquee housing. Switch off the power to the game machine and unplug the AC line cord. Lift open the Marquee Housing. Refer to service instructions for Marquee. Reach up inside the opening in the cabinet and disconnect the speaker wires, including the ground strap. Remove the nuts on the mounting screws before removing the speakers from the enclosure. Perform the desired repair or equipment replacement. Carefully reseat the seals upon completing any task in the speaker enclosure. + Reconnect the wires, including ground. Refer to the Cabinet Wiring Diagram for correct speaker polarity.

NOTE:The speakers are magnetically shielded to prevent video monitor color impurity. Be sure that any replacement speakers are also magnetically shielded.

To service Viewing Glass... It is recommended that two service personnel be present when servicing the viewing glass. Refer to Viewing Glass Service illustration. Switch off the power to the game machine and unplug the AC line cord. + Remove the Control Cabinet. Refer to service instructions for Control Cabinet. Lift open the Marquee Housing. Refer to service instructions for Marquee. Label and disconnect all wiring. Disconnect one end of the tension chain. Close the marquee. Remove the tamper resistant screws from the hinge for the marquee located at the top rear of the cabinet. Both service personnel should grab an edge of the marquee housing and lift it off of the cabinet. To prevent scratches, the marquee housing should be placed on a cloth covered work surface. Remove the tamper resistant screws and bracket from the bottom edge of the housing. Remove the screws and bracket from along the top edge of the housing. Gently lift the viewing glass up and clear of the housing. Set Viewing Glass aside. Perform the desired repair or equipment replacement. Clean the glass before reinstallation.

Page 51

CHAPTER 3 SERVICE

VIEWING GLASS SERVICE

To service Monitor Bezel... + Switch off the power to the game machine and unplug the AC line cord. + Lift open the Marquee Housing. Refer to service instructions for Marquee. + Grasp the monitor bezel at the bottom and lift it out of cabinet. + Perform the desired repair or equipment replacement. + Wipe the bezel clean before reinstallation.

To service the Monitor (CRT)... We recommend that you read the WARNINGS thoroughly before beginning this procedure.

AN

CAUTION

The video monitor is heavy, with most of the weight toward the front of the assembly. Be sure it is firmly supported as it is moved from the cabinet.

MIDWAY AMUSEMENT GAMES, LLC.

Page 52

CHAPTER 3 SERVICE

WARNING Ay The monitor does not require isolation from the AC line voltage in normal operation. When operating outside the cabinet or servicing the monitor on a test bench, ISOLATE THE MONITOR FROM LINE VOLTAGE WITH AN ISOLATION TRANSFORMER.

Switch off the power to the game machine and unplug the AC line cord. + Remove the Control Cabinet, Marquee Housing, and Monitor Bezel. Refer to service instructions for the Control Cabinet, Viewing Glass and Monitor Bezel. + Open the rear cabinet door and disconnect the monitor from the wiring harness and ground wires. + Remove 4 nuts securing the monitor mounting flanges to the mounting panel. + Pull the monitor carefully from the cabinet and set aside. + Perform the desired repair or equipment replacement.

To service the Control Cabinet... Refer to the Control Cabinet Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the tamper resistant screws from either side of the control cabinet used to fasten it to the cabinet brackets in the main cabinet. + Slide the control cabinet halfway back along the rails to expose wiring. Label and disconnect all wiring. + Continue to slide the cabinet away from the main cabinet until it clears the mounting rails. + Perform the desired repair or equipment replacement.

CONTROL CABINET SERVICE

Page 53

CHAPTER 3 SERVICE

To service the Dashboard... Refer to Dashboard Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the Control Cabinet. Refer to service instructions for Control Cabinet. + Remove the tamper resistant screws from the molded control cabinet cover. Lift the lid off of the cabinet and set aside in a safe place. + Label and disconnect all dash wiring, including the ground strap. + Remove the four screws used to fasten the Dashboard to the cabinet. + Firmly grab the dash and pull it straight out. NOTE: The Dashboard is heavy, with most of the weight concentrated in the center near the Steering Mechanism. + Perform the desired repair or equipment replacement. To reinstall, line-up the holes on either side of the Dashboard and push straight back. + Check for pinched wires, and then reconnect dash wiring and ground strap. Fasten in place with the screws provided.

GEAR SHIFT CABLE STEERING MECHANISM

VIEW BUTTON CABLE

DASHBOARD SERVICE

To service the Dash Panel Insert ... Refer to the Dashboard Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the Dashboard. Refer to service instructions for Dashboard. + Remove 4 tamper resistant screws used to fasten the cover to the molded dash and set aside. + Lift the plastic cover plate off of the PCB and dash. + Perform the desired repair or equipment replacement. NOTE: It may also be necessary to remove the Dash PCB. Refer to service instructions for Dashboard PCB. + Reinstall and fasten in place with the screws provided.

To service the Dashboard PCB... Refer to the Dash PCB Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the Dashboard. Refer to service instructions for the Dashboard + Remove the steering wheel, shifter plate assembly, and buttons plate assembly. Refer to service instructions for the steering assembly, shifter and buttons. Remove 4 tamper resistant screws used to fasten the PCB back plate to the molded dash and set aside.

8 MIDWAY AMUSEMENT GAMES, LLC.

Page 54

CHAPTER 3 SERVICE

To service the Dashboard PCB, continued... + Remove the tamper resistant screws used to fasten down the dash panel insert. Lift the insert from the dash. Pull out the PCB back plate from the molded dash. + Remove the ribbon and power cable connections. + Remove the snaps used to fasten the PCB to the back plate. Lift the PCB off the back plate. + Perform the desired repair or equipment replacement. Connect the ribbon and power cable to a Dashboard PCB. NOTE: The red stripe on the ribbon cable must be lined up with pin 1 on the PCB, and the black wire on the power cable must line up with pin 1 on the power connection for the Dashboard. Reattach the PCB to the back plate, and then fasten the back plate to the molded dash. + Check for pinched wires. Reinstall the Dashboard and fasten in place with the screws provided.

DASH PCB SERVICE

To service Start and View Buttons... + Switch off the power to the game machine and unplug the AC line cord. + Remove the 3 tamper-resistant buttons used to fasten the faceplate. + Pull the plate forward enough to expose the switches. + Label and disconnect the wiring. + Lift assembly completely out of the dash and set aside. + Perform the desired repair or equipment replacement. + Reconnect wires and reinstall buttons. + Check for pinched wires. + Fasten the faceplate with the screws provided.

Page 55

CHAPTER 3 SERVICE

To service Shifter... Refer to the General Dashboard Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the Control Cabinet and the Dashboard. Refer to service instructions for Control Cabinet and Dashboard. + Remove the tamper resistant screws used to fasten the molded plastic cover on the control cabinet. Lift the cover off of the cabinet and set aside. Label and disconnect all wiring. + Remove the tamper-resistant screws used to fasten both of the faceplates. + Pull the shifter plate and button plate forward enough to expose the switches. Label and disconnect wiring to switches. + Lift button assembly completely out of the dash and set aside. + Remove the bolts used to fasten the shifter enclosure to the dash plate. + Lift enclosure from dash plate. Label and disconnect wires. + Perform the desired repair or equipment replacement. + Reconnect wires and reinstall shifter. + Check for pinched wires. + Fasten the faceplate with the screws provided.

GENERAL DASHBOARD SERVICE

To service Steering Assembly... + Refer to the General Dashboard Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the Dashboard. Refer to service instructions for Dashboard. + Remove 6 screws used to fasten the cover plate to the center of the steering wheel. Remove the cover plate and set aside. + Remove the 3 screws used to fasten the wheel hoop to the shaft. Pull the wheel hoop off of the dashboard. Disconnect the harness for the buttons on the steering wheel.

10 Mipway AMUSEMENT GAMES, LLC

Page 56

CHAPTER 3 SERVICE

To service Steering Assembly, continued... + Remove 4 flange nuts holding the motor shield, motor and shaft to the wheel assembly (shield not required on all cabinets). + Slide the motor and the shaft off of the assembly. + Perform the desired repair or equipment replacement. + Reinstall and fasten all items in place with the screws provided.

While the steering mechanism is exposed, inspect the belt for splits in the rubber or other signs of wear at the edges of the teeth. Install a new belt if necessary following the instructions below.

To service Steering Belt... + Loosen four mounting nuts for the motor bracket. + Tighten the tension-adjust bolt only until there is no belt deflection, then loosen the bolt one full turn and tighten the four nuts. + Reattach the mechanism and recalibrate the assembly.

IMPORTANT: Apply removable anaerobic adhesive thread lock (Loctite Blue 242 or equivalent) and torque set screw to seven to nine ft.-Ibs. (84 to 108 in.-lbs.) if it was loosened.

STEERING WHEEL Hoop SERVICE

To service Boost Buttons on the Steering Wheel Hoop... Refer to the Steering Wheel Hoop Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the screws used to fasten the wheel hoop cap to the steering wheel. Lift of the hoop cap off and set it aside with the hardware for reuse later. + Lift out the steering wheel spacers. Gently pull the steering wheel forward enough to expose the boost button cable connector. + Unplug the boost button cable. Remove the steering wheel completely from the dashboard. Turn the steering wheel over to observe the rear side of the wheel hoop. Remove the tamper resistant screws used to fasten the rear cover to the steering wheel hoop. Lift the cover off and set aside with the hardware for reuse later. + Use a desoldering tool coupled with a soldering iron to remove the solder used to attach the cable wires to the button’s switch. NOTE: Use caution when performing this step to avoid becoming burned by liquefied solder and /or to avoid melting plastic parts. + Allow the area surrounding the switch and button to cool properly before proceeding.

Page 57

CHAPTER 3 SERVICE

To service Boost Buttons on the Steering Wheel Hoop, continued... + Unscrew the nut on the button. Lift the button out of the steering wheel hoop. + Perform the desired repair or equipment replacement. + Be sure to solder the cable wires to the button’s switch when reinstalling a button(s). + Reinstall and fasten all items in place with the screws provided.

To service Control Cabinet Speaker... This speaker is located just above the pedal assembly. + Switch off the power to the game machine and unplug the AC line cord. + Remove the Control Cabinet. Refer to service instructions for Control Cabinet. + Label and disconnect wiring, including the ground strap. + Remove the nuts on the mounting screws before removing the speaker from the enclosure. + Perform the desired repair or equipment replacement. + Carefully reseat the seals upon completing any task in the speaker enclosure. + Reconnect the wires, including ground. Refer to the Cabinet Wiring Diagram for correct speaker polarity.

To service Pedal Assembly... + Switch off the power to the game machine and unplug the AC line cord. + Remove the Control Cabinet. Refer to service instructions for Control Cabinet. + Adjust the seat to the maximum rear position. + Remove 4 tamper resistant screws used to fasten the Pedal assembly to the cabinet. NOTE: Due to the weight of the pedal assembly it may slide or abruptly jerk out of the opening once all screws are loosened and/or removed. + Pull the assembly forward enough to expose wiring. Carefully note the orientation of the cable wiring. Label and disconnect wiring, including ground. + Perform the desired repair or equipment replacement. Reinstall pedal assembly and reconnect wiring, including ground. + Align the holes for the screws and fasten in place with the hardware provided.

To service Coin Meter... + Switch off the power to the game machine and unplug the AC line cord. + Unlock the cash door and swing it open. Remove the cash tubs. + The meter is located on a plate at the vault bottom. Remove the screws and lift the plate just enough to disconnect the meter wires from the harness. + Record the meter count before testing or replacement. + Perform the desired repair or equipment replacement.

To service Coin Mechanism... + Switch off the power to the game machine and unplug the AC line cord. + Unlock the coin door and swing it open. + Unlatch and remove each coin mechanism separately to clean or replace with a different type. Ensure mechanism seats fully in the holder upon reinstallation.

  • Close and lock the release latch, then close the door. Turn on the game and change the mechanism setup, then test known good and bad coins to verify operation.

To service Dollar Bill Validator... (Use MARS AE2411-U3 UL recognized currency changer) Dollar bill validators or other currency acceptors may be installed in games that are manufactured with the additional wiring connector. + Switch off the power to the game machine and unplug the AC line cord.

12 Mibway AMUSEMENT GAMES, LLC

Page 58

CHAPTER 3 SERVICE

To service Dollar Bill Validator, continued... + Unlock the coin door and swing it open. Read the label affixed to the door for additional information. + Disassemble the validator and remove material to permit it to fit inside the coin door as illustrated then reassemble unit.

DOLLAR BILL ALIDATOR SERVICE

To service PCB Board Assemblies... + Switch off the power to the game machine and unplug the AC line cord. + Unlock and remove the rear door. + Remove the screws used to fasten the hinged, metal cage covering the PCB Assembly. + Open the cover, which is hinged along the bottom edge, to expose the PCB assembly. Carefully note the orientation of the JAMMA connector and the other cables. Extract the harness and other cables from the board connectors. + Remove the mounting screws from the desired circuit board assembly. Lift the board out of the cabinet and set in a safe place. Use anti-static bags and protective containers from new parts for storage if not reinstalled immediately. + Perform the desired repair or equipment replacement. + Be certain to reinstall the perforated cover so that it seals against the metal plate.

CAUTION A Discharge any static electricity built up in your body by touching the chassis for the power supply. Do this BEFORE touching or handling the electronic assemblies.

To service Wheel Driver Board Assembly... + Switch off the power to the game machine and unplug the AC line cord. + Unlock and remove the rear door. + Remove the screws used to fasten the hinged, perforated metal cage covering the PCB Assembly. + Open the cage, which is hinged along the bottom edge, to expose the PCB assembly. + Carefully note the orientation of the cables. Extract the harness and other cables from the board connectors.

Page 59

CHAPTER 3 SERVICE

To service Wheel Driver Board Assembly, continued... + Remove the wheel driver board assembly mounting screws. Lift the board out of the cabinet and set in a safe place. Use anti-static bags and protective containers for storage if not reinstalled immediately. + Perform the desired repair or equipment replacement. + Be certain to reinstall the metal cover so that it seals against the metal cage.

To service the Main Boot, PIC or Sound ROM... The ROM (Read Only Memory) circuits contain the computer operating instructions for the game. The Main Boot ROM is located on the Mango PCB; the sound ROM is located on the Vegas SIO PCB; the PIC chip is located on the Vegas SIO PCB.

Memory devices are especially sensitive to static charges. Use grounding precautions when handling these parts.

Switch off the power to the game machine and unplug the AC line cord. + Unlock and remove the rear door. Remove the screws used to fasten the hinged, metal cage covering the desired PCB Assembly. Open the cover, which is hinged along the bottom edge, to expose the PCB assembly. Carefully note each IC position, and then remove using a chip extraction tool. To install memory circuits, orient a chip over the corresponding socket and press firmly to seat pins. Do not force.

CAUTION A Discharge any static electricity built up in your body by touching the chassis for the power supply. Do this BEFORE touching or handling the electronic assemblies

To service the Battery... + Switch off the power to the game machine and unplug the AC line cord. Unlock and remove the rear door. Remove the screws used to fasten the hinged, metal cage covering the PCB Assembly. Open the cage, which is hinged along the bottom edge, to expose the PCB assembly. Locate the battery on the Vegas SIO Board assembly, and then remove using a chip extraction tool. To install a battery, orient a battery over the corresponding socket and press firmly to seat. NOTE: Do not force; the battery is notched and will only fit in the socket one way.

To service an Auxiliary Board Assembly... Switch off the power to the game machine and unplug the AC line cord. + Unlock and remove the rear door. Remove the screws used to fasten the hinged, metal cage covering the PCB Assembly. Open the cover, which is hinged along the bottom edge, to expose the PCB assembly. Carefully note the orientation of the cables. Extract the harness and other cables from the board connectors. Remove the assembly mounting screws. Lift the board out of the cabinet and set in a safe place. Use anti-static bags and protective containers for storage if not reinstalled immediately. Perform the desired repair or equipment replacement. + Be certain to reinstall the metal cover so that it seals against the metal cage.

To service the Power Supply... + Switch off the power to the game machine and unplug the AC line cord. + Unlock and remove the rear cabinet door. + Unplug the IEC AC connector from the rear of the supply and the DC connector from the front.

14 MIDWAY AMUSEMENT GAMES, LLC

Page 60

CHAPTER 3 SERVICE

To service the Power Supply, continued... + Remove the two front and two rear screws from the supply, then lift it off of the power chassis. Note voltage setting. + Perform the desired repair or equipment replacement. + Be sure to set the voltage switch to the correct value prior to reinstallation. + Set the supply on the power chassis and align the mounting holes. Install the four screws and the two power connectors.

To service the Transformer... + Switch off the power to the game machine and unplug the AC line cord. + Unlock and remove the rear door. + If the power to the Video Game Machine (VGM) was only recently disconnected, the transformer may still be warm. Allow the transformer to cool completely before handling. + Label and disconnect all wiring, including ground. + Remove the screws used to fasten the transformer to the base of the cabinet. + Perform the desired repair or equipment replacement.

DANGER UN High voltage present. Exercise extreme caution while servicing transformer.

To service Fan Assembly... + Switch off the power to the game machine and unplug the AC line cord. + Unlock and remove the rear door. + Remove the perforated metal cover to expose the fan assembly and set aside. + Unplug the fan power connector from the wiring. + Remove the screws used to fasten a fan down and then lift fan out. + Perform the desired repair or equipment replacement.

To service Speakers in Head Rest... Refer to the Seat Pedestal Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the tamper resistant screws from the speaker grille. + Remove the tamper resistant screws used to fasten the speaker plate to the seat and pull forward. + Label and disconnect wires, including ground. + Remove the nuts used to fasten the speaker to the plate and remove speaker(s). + Perform desired repair or equipment replacement. + Reinstall the speaker(s) to the speaker plate and reattach wiring, including ground. Attach the speaker plate to the seat. + Reinstall speaker grille and fasten in place with hardware provided.

To service Speaker in Seat Back... Refer to the Seat Pedestal Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Remove the tamper resistant screws used to fasten the grille to the seat and pull forward. + Label and disconnect wires, including ground. + Remove 4 Phillips head screws used to fasten the speaker to the seat and remove speaker. + Perform desired repair or equipment replacement. + Reinstall speaker and reattach wiring, including ground. Reinstall speaker grille and fasten in place with hardware provided.

Page 61

CHAPTER 3 SERVICE

To service the Seat Slide Assembly... Refer to the Seat Pedestal Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Disconnect the Seat Assembly from the cabinet by removing the tamper resistant screws used to fasten the assembly to the slide rails in the cabinet. Slide the Seat Assembly halfway back along the rails to expose wiring. + Disconnect the speaker cable and slide the seat the rest of the way off the rails. + Remove 3 tamper resistant screws from each side of the seat mounting plate. Lift the seat and mounting plate assembly off the pedestal and set aside.

  • Slide the seat assembly forward, and remove the two tamper resistant screws from the rear of the metal panel on top of the pedestal assembly. + Slide the seat assembly backward and remove the two tamper resistant screws from the front of the metal panel. Lift the metal panel out of the pedestal base and turn the unit over. + Remove the four nuts holding the metal panel to the slide assembly. Set the metal panel aside and slide assembly is exposed. + Perform the desired repair or equipment replacement. + Reinstall by performing the steps in reverse and fasten in place using the hardware provided.
IMPORTANT: Apply removable anaerobic adhesive thread lock (Loctite Blue 242 or equivalent) and torque each bolt to seven to nine ft.-Ibs. (0.7 to 1.0 Nm) if it was loosened (see illustration).

To service the Seat Assembly... The Seat Assembly includes the pedestal base. Refer to the Seat Pedestal Service illustration. + Switch off the power to the game machine and unplug the AC line cord. + Disconnect the Seat Assembly from the cabinet by removing 8 tamper resistant screws used to fasten the assembly to the slide rails in the cabinet.

  • Slide the Seat Assembly halfway back along the rails to expose wiring. Disconnect the speaker cable and slide the seat the rest of the way off the rails. + Remove 3 tamper resistant screws from each side of the seat mounting plate. Lift the seat and mounting plate assembly off the pedestal. + Place the seat on its back, on a flat surface. Perform the desired repair or equipment replacement. + Reinstall using the hardware provided.
IMPORTANT: Apply removable anaerobic adhesive thread lock (Loctite Blue 242 or equivalent) and torque each bolt to seven to nine ft.-Ibs. (0.7 to 1.0 Nm) if it was loosened (see illustration).

16 Mipway AMUSEMENT GAMES, LLC

Page 62

CHAPTER 3 SERVICE

Fe 28

‘09 tavern aesistavr scat fass/s baw wasn

ee

[~ t/e-zoni/2 Bs Sea Sue wouTNG | y

a \ w (0 100% mse

  • to awreunen Ve mMaL Rt ” an Hy
  • 100% maser Se setn
  • meen esa sa (6) moe sore , STS, aS Ete

\ (3) #8 x 3/4 PH

\

wees, somo eoce—\

SEAT SUE ASSENaLY—/

Pevesta.

SEAT PEDESTAL SERVICE

Page 63

CHAPTER 3 SERVICE

NOTES

18 Mibway AMUSEMENT GAMES, LLC

Page 64

CHAPTER FOUR

PARTS

equipment damage! Use only Midway authorized parts. + For safety and reliability, substitute parts and modifications are not recommended.

WARNING: Use of Non-Midway parts or circuit modifications may cause serious injury or A\ + Substitute parts or modifications may void EMC directive or FCC type acceptance.
Page 65

CHAPTER 4 PARTS

Cabinet Front View

__A-22508 FLOURESCENT LAMP ASSEMBLY

03-9947 R MARQUEE

“|| 5675-15773-00 31-2536 |} WID RESOLUTION 35” MONITOR BACKLIT MARQUEE

08-8016

  • WONITOR BEZEL

04-12690-3 eEpeD 4 03-9976 MOLDED Bezel DED DASH TOP HOUSING HOUSING.

BLY 01-15090_ |L DRAWING) SPEAKER GRILLE

OR RT) COIN (SEE APPLICATION CHA

04-10635 COIN VAULT ENCLOSI

/ 04-12760-1 SECURITY BRACKET, LEF

04-12760-2 OTHER COMPONENTS SECURITY BRACKET, RIGHT 04-12461-1 LEFT DASH BRACKET 04-12461-2 RIGHT DASH BRACKET '5555-16059-00 6.5" SUB WOOFER SPEAKER | 23-6822 CASHBOX DOOR PEDESTAL FLOOR MAT 01-13980 FRONT SPEAKER GRILLE 23-6723 _/ SEAT/PEDESTAL ASSI 01-1550 CABINET BOTTOM EDGE FLOOR MAT (SEE DETAIL D

Pedestal Assembly

CABINET MOUNTING HOL!

04-12959

  • SUPPORT BEAM

PEDESTAL MOUNTING 4700-00033-00 X 625 X 067 HER 4701

  • 1/4 SPLIT Lo

4320-01164-20B

  • 1/4-20 X 1 1/4 BOLT

4700-00075-00B /

  • .296 X 1.00 X 094 TAMPE

2 Mipway AMUSEMENT GAMES, LLC

Page 66

CHAPTER 4 PARTS

Caster & Leveler Assemblies

10633

  • SWIVEL MTG, SR«T

20-10596 VEL CASTER

20-10596

/01-14526

  • LEVELER PLATE

| 4424-01182-00

  • JAM NUT 1/213

08-8023 a 4420-01141-00 _

  • FLANGE NUT 1/4

. 20-10360

  • SWIVEL CAS]ER————

Marquee Interior View

04-12786

04-12690-3 MOLDED BEZEL HOUSING

FRONT PERSPECTIVE VIEW

20-9275-3 SAFETY CHAIN

03-9956

  • SHORT MARQUEE — RETAINER

5555-15098-00_/ 5 1/2 FULL SPEAKER —* 8 OHM SHEILDED

08-8016 / CARDBOARD —/ 5675-15773-00 BEZEL MEDIUM RESOLUT 39" VIDEO MONITOR

Page 67

CHAPTER 4 PARTS

Cabinet Rear View

VOLDED BEZEL HOUSNG (SEE DETAIL RAY

23069 (ON/OFF swircH ASSEMBLY

5675-15772-00 MEQIUM RESO, UTON 9° VIDEO MONT 09-8006 38" VIDEO MONITOR (2) HANDLE PULL/VENT

ag gone

oar asswory —/ EE DETAIL DRANG) Teansronver © APPLICATION CFA

4108-01219-11

  • 8-32 x 11/16 SCREWS

i 1/4-20 FLANGRIP NUTS. part oF poon__ Ae

4420-01141-00 FLANGRIP- NUTS K CAM ASSEMBLY

4320-01164-20B

  • 1/420 x 11/4 FLAT HEAD BOLTS

\ KEYS \—PaRT OF DOOR 01-11291 CAM LOCK AS DOOR BRACKET oS 11-1367 REAR WOOD DOOR

03-7602 | 20" VENT HOLE COVER : SS 4320-01164-20B

  • 1/4-20 X11 1/4 BOLTS FLAT HEAD

4 Mipway AMUSEMENT GAMES, LLC

Page 68

CHAPTER 4 PARTS

Marquee Assembly

44108.01219-20

  • #8 x1 1/4 ‘iE:

12896 oxo087 BACKLIT MARQUEE] CLEAR MARQUEE, i \ |

ee (6) 6-52 KEPs wut

  • SHORT WARQUE RETAINER a sesimm Ye J ¥onw Satie 039603 UPPER MARQUES RETAINER “ “4408-01128-00 f® B-32KEPS NUT 22506 /-FLOURESCENT LAME MALY 15W 16

waRQuEE mouNTING— [BRACKET

  • .265 087 BLACK OXIDE FLAT WASHER

srono12198.41 o«-s26003_| MOLDED BEZEL HOUSING dozn.ott0016 |

  • fsx 11/16 SHEET METAL’ screw | (5) 1/4=20 x 1) i M2208 38 x .06 sincLE— PVC FOAM TAPE

oa-2706 seze. wountins BRACKE 4409.01128.00 Loyiyj4-20 x1 32 KEPS NU Hex ’FEAD BOL

\__ 202753 SAFETY CHAIN

Pedal Assembly 20-10135

Page 69

CHAPTER 4 PARTS

Seat Pedestal Assembly Stems! 01-14945.2-1 (01-14939-1 \ upper DECAL /— UPPER SEAT PLATE |REAR UPPER PLATE

4408-01119-00 {~~ (4) 8-32_KEPS NUTS 5555-16234-00 / (2) 3" FULL RANGE SPEAKER

01-14945.2-2 MIODLE SEAT PLATE 04-12815-1 SPEAKER GRILLE

4108-01193-10B

  • TAMPER RESISTANT SCREW 8x5/8 PH W/ WASHER \—

120-01 100-08 TAMPER RESISTANT SCREW 1/4-20%1/2 3H / 31-3538 WOOFER GRIL!

4108-01193-10B ) TAMPER RESISTANT SCREW #8x5/8 Ph W/ WASHER 4702 0014-008 iW TERNAL TOOTH

  • 4701-00006 09

peas 40 4322-01070-12 ® (6) MACHINE SCREW f4- Dod 1/2 01-19551 3/8-16x3/4 HEX HEAD AL BOTTOM ED 4108-01042-12

  • (3) #8 X 3/4 PFE 01-15250 SHEET METAL SCREW ‘SEAT PLATE

04-10872 SEAT SLIDE ASSEMBLY

o4-ta9t1 STAD

OTHER COMPONENTS H-23579 SEAT SPEAKER CABLE \ 01-15251.1 ROLL BAR BRACKET 23-6822 \. PEDESTAL FLOOR MAT

6 Mipway AMUSEMENT GAMES, LLC

Page 70

CHAPTER 4 PARTS

Lamp Assembly A-22506

04-11106 JOUSING ASS|

STARTER

~~ 4408-01128-00 an NUT 8-32 KEPS

E CHART BELOW)

Sy 20-10444 —!

LAMP. HOLDER

VENTIONAL LAMP BALLASTS

20-10263 ic 20-8749-8 20-10220 20-10384 20-10379 20-10380 20-10236

  • 24-8809 Of 24-8874 LOUF ENT BULB 18” 15W
  • 20-10444 MP HOLDER

04-11241.1 FLUORESCENT HOUSING 4002-01105-04 s Wy #2-56 P—PH

20-10481.2 > BALLAST

24-8809 0% 24-8874 FLOUR! NT BULB 18” 15W

A C Power Assemblies

5102-14240-00 LINE FILTER\ A-23089 5733-12869-00 E FUSE HOLDER PANEL

04-12639.2 __/ AC PLUG BRACKET

Page 71

CHAPTER 4 PARTS

Dashboard Assembly

/7 18035 alld NOLLNE INVISISSY 43: v/E X O%~v/ / 2004 L0-020% LAN OZ-b/L (4) / 00-setLo-ozry

S}-299S -S6LS Blavo 4. qa Hsva 8LCEZ-H

“ (ONIMWHG “IvL3q 33s) WSINVHO3W ONIESSLS

Mipway AMUSEMENT GAMES, LLC

Page 72

CHAPTER 4 PARTS

Steering Wheel

4028-01191-16B /— SOCKET HEAD BOLT 1/4-28 x 1 STEERING a NISN

02-5391. 20 10189 “HUB SHER v UB aE RNAL TOOTH

“ 20-10718 HOOP STEERING WITH BOOST BL EL 5 AND CABLE

  • STEERING WHEEL SPACER El-219/ AS REQ'D LOCKTITE 680

VA 10-564.1_/ CABLE SHIELD

H-23780.2

4427-01183-00 JAM NUT, 1/2-2

4701-00005-00B 7

  • 1/4 Bi SPLIT —~

Button Plate Assembly A-23562

a 6-011 0-088

BUTTON PLA __ 31-3690-3 31-3530-1 BUTTON PUSH BUTTON ae — VIEW 3

H-23259 / CH HARNESS

31-3630-2 OVAL pape BOON a

Page 73

Mipway AMUSEMENT GAMES, LLC 5014-12909-00

STEERING POTENTIOMETER

02-5279

TOOTHED DRIVE

Steering Mechanism 20-10713 CHAPTER 4 PARTS

Page 74

CHAPTER 4 PARTS

Coin Door Assembly

KEY

aa 27-3729 NUT WASHER— i 27-3725 BUTTON BEZEL CAM LOCK ARM———@ Sg] | ENTRY /REJECT Say | BUTTON

F

24-8768 LIGHT BL BS

27-3730 or 27-3733 REJECT BEZEL

BLANKING PLATE

NOTE: SEE COIN DOOR APPLICATION CHART FOR ASSEMBLY NUMBER

03-8863 CASH TUB

STEEL ENCLOSURE

5580-13476-00 COIN METER

Page 75

CHAPTER 4 PARTS

Power Supply 20-10537

5060-15755-00 LINE FILTER (REQUIRED PIN CONNECTOR FOR EUROPEAN MODELS) POWER cane D.C. MAIN POWER

  • powe®! SI Be CONNECTOR MOUNTING BRACKETS. PINS. FUNCTION COLOR +5 VDC _RED 8 GROUND 1,23
NOTE: Many computer grade power supplies use alternate wire colors. This is acceptable as long as the pinout is correct.

Electronics Assembly A-23566-1

CRU BOARD ASSEMBLY

\— (12) SCREW 48~S255/8 PH

RIBBON CABLE, 40-PIN 12!

EN #44045 /8 PHL case CA)ISCREN Fos /6 ,

WHEEL ORVER waLY BOARD

Ce) TAT WAS }5en.4574.050 NOISE REDUCTION FAN INTERFACE

OTHER COMPONENTS FD eens a sur 20-10383 HARD DRIVE POWER CABLE | i I — (4) SCREW #6-32x2 PL-HWH

12 Mipway AMUSEMENT GAMES, LLC

Page 76

CPU Board Assembly A-23645

Field Replaceable CPU Board Parts CHAPTER 4 PARTS

DESIGNATION PART NUMBER FUNCTION DESCRIPTION

U19 A-23315 Bus Controller Configuration Programmed Logic Device

U22A-22912CPU ConfigurationProgrammed Logic

Device

U27A-5343-40090-1CPU Boot ROMEPROM Assembly
U28-CPU Expansion ROMEPROM Assembly

(empty)

Page 77

CHAPTER 4 PARTS

Sound I/O Board Assembly A-23646-1

Field Replaceable Sound I/O Board Parts DESIGNATION PART NUMBER FUNCTION DESCRIPTION

U28 5880-15774-00 Memory Backup Batttery U37 A-23647 PIC Assy 40095 EPROM Assembly U44 A-5343-40090-2 Sound EPROM Assembly

Mipway AMUSEMENT GAMES, LLC

Page 78

Field Replaceable Wheel Driver Board Parts Wheel Driver Board 04-12770.1 CHAPTER 4 PARTS

DESIGNATION PART NUMBER FUNCTION DESCRIPTION

Fi, F2 5731-14094-00 Circuit Protection Fuse 41A SB

F3 5731-15627-00 Circuit Protection Fuse .63A FB

U3 A-23362 Controller PLD Assy Primary U3 A-23363 Controller PLD Assy Secondary

Page 79

CHAPTER 4 PARTS

Line Cord Application Chart Part Number

5850-5850-5850-5850-5850-5850-5850-
14699-14699-14699-14699-14699-14699-14699-
COUNTRY00010203040506

Australia x Austria Belgium Canada x Denmark Finland x

x

France Germany Holland Hungary Italy x Japan x New Zealand x Norway x Spain x Switzerland x United Kingdom x United States x x| x] x] ><] x] x

Coin Door Application Chart Part Number 09-96023- Country 02 | 03 | 04 | 06 |] 07 | 09 | 11 | 13 | 14] 15 | 17 ] 18 ] 20 | 22 | 23 | 24 | 33 Australia x Austria x Belgium x Canada x Denmark x Finland x France x Germany x Holland x Hungary x Italy x Japan x New Zealand x Norway x Spain x Switzerland x United Kingdom 09-80000 United States x

16 Mipway AMUSEMENT Games, LLC

Page 80

CHAPTER 4 PARTS

Transformer Assembly (Refer to application chart)

Ds

Transformer Application Chart Voltage Part Number & Country 5610-14926-00 5610-14927-00 5610-15275-00 230 VAC Australia x 230 VAC Austria x 230 VAC Belgium x 230 VAC Canada x 230 VAC Denmark 230 VAC Finland 230 VAC France 230 VAC Germany 230 VAC Holland 230 VAC Hungary 230 VAC Italy 100 VAC Japan x 230 VAC New Zealand 230 VAC Norway 230 VAC Spain 230 VAC Switzerland 230 VAC United Kingdom 120 VAC United States x | x] x] x] x] x] >

x| x] x] x] x

Page 81

CHAPTER 4 PARTS

Supplementary Parts

Power & Protection AC Line Filter, 6A, 250V 5102-14240-00 Ferrite Bead 5556-15272-00 Fuse, 0.63A, 250V, FB, 5 x 20 mm | 5731-15627-00 Fuse, 3A, 250V, SB, 1/4x 1 1/4 5731-10356-00 Fuse, 4A, 250V, SB, 1/4x 1 1/4 5731-06314-00 Fuse, 4A, 250V, SB, 5 x 20 mm 5731-14094-00 Fuse, t2.5A, 250V, 5 x 20 mm 5731-14532-00

Cables 26-Pin Ribbon Cable 5795-15667-48 Driver Cabinet Extension Cable H-23578.1 AC Interconnect Cable H-23611.1 AC Line Harness H-23279 Gear Shift Cable W/Dual Grd. H-21124.1 Dash LED Power Cable H-23218 40 ckt Ribbon Cable W/Grd Bus 5795-10937-18 Bill Acceptor Adapter Cable H-23639 20 Pin Ribbon Cable 5795-10937-18 Circuit Board Harness H-23618.1 Shielded Video Cable 20-10493 Dash Cable H-22507 Linking Cable 5797-15276-00 Flourescent Lamp Cable H-22507 Hard Drive Power Cable 20-10383 Series Speaker Cable H-23275.1 AC IDC Cable H-20353 Main Wiring Harness H-23770.2 Seat Speaker Harness H-23579 Grnd Braid With Dual Ring Term H-23798-67 Grnd Braid With Ring Term H-22327-46

Documentation Caster Installation Instructions 16-11010 Operators Manual 16-40095-101 Product Registration Card 16-10650

Tools & Game Installation Hardware Bolt,Hex Head, 1/4-20 x 1 4320-01124-16 Bulb, #555, 6.3V, .25 Amps 24-8768 Bulb, #161 24-8840 Crossover Coupler 5796-15262-00 Screw, SMS, #8 x 1 1/2 TRX 4108-01160-24B Screw, Tamper-Resistant, 1/4-20 1 1/4 4020-01100-20 T-20 Tamper-Resistant Wrench 20-9620 T-27 Tamper-Resistant Wrench 20-10140 Washer, Flat, .265 x 1.00 x.067 4700-00135-00B Washer, Flat, .265 x .750 x .067 4700-00033-00 Washer, Lock, 1/4 Split 4701-00005-00 Washer, Lock, 1/4 Internal Tooth 4702-00014-00B

Mipway AMUSEMENT GAMES, LLC

Page 82

CHAPTER FIVE

WIRING

Page 83

CHAPTER 5 WIRING

JAMMA CHART

FunctionWire ColorPinPinWire ColorFunction
GroundBlackA1BlackGround
GroundBlackB2BlackGround
+5VDCRedCc3Red+5VDC
+5VDCRedD4Red+5VDC
-SVDC.YellowE5Yellow-5VDC.
N/CFE6Orange+12VDC.
KeyH7Key
Coin Counter 2Brown/RedJ8BrownCoin Counter 1
NicK9N/C
-Cabinet SpeakerBrown/GrayL10Red/Gray+Cabinet Speaker
N/CM11Red/White+Seat Speaker
Video GreenYellow/GreenN12Yellow/RedVideo Red
Video SyneYellow/WhiteP13Yellow/BlueVideo Blue
Service CreditsWhite/GrayR14Yellow/BlackVideo Ground
Slam TiltBlack/GreenSs15Black/BlueTest Switch
Coin 2Black/RedT16Black/BrownCoin 1

NIC U 17 White Start

Gear 1Green/BlackVv18N/C
Gear 2Green/BrownWw19N/C
Gear 3Green/Redx20N/C
Gear 4Green/OrangeY21N/C
N/CZ22White/YellowView 1 Switch
N/Ca23White/GreenView 2 Switch
N/Cb24White/BlueView 3 Switch
N/Cc25N/C
N/Cd26N/C
GroundBlacke27Yellow/Brown, Black | Ground
GroundBlackf28BlackGround

SOLDER SIDE COMPONENT SIDE

DASHBOARD WIRES (NOT PART OF THE MAIN JAMMA HARNESS)

WHEEL MOTOR BLACK _| Brown/White -Green/BlackGEAR SHIFT 1 (1st)
WHEEL MOTOR REDBrown +Green/BrownGEAR SHIFT 2 (2nd)
Red+5V STEERINGGreen/RedGEAR SHIFT 3 (3rd)
Orange/BlueSTEERING POSITIONGreen/OrangeGEAR SHIFT 4 (4th)
BlackGROUND STEERINGBlackGEAR GROUND

DC POWER SOURCE VOLTAGE LIMITS

FunctionRange LimitsIDIDRange LimitsFunction
Digital Circuits+4.90V to +5.10V+5V-5V-4.75V to -5.25Audio lights
Audio; DBV+11.5V to +12.5V+12NOTE: +5V is adjustable on the power supply

MIDWAY AMUSEMENT GAMES, LLC

Page 84
Scan of page 84

This page is a drawing, shown as the original scan.

Page 85
Scan of page 85

This page is a drawing, shown as the original scan.

Page 86

Mipway AMUSEMENT GAMES, LLC

r Cabinet Assem ‘abinet

| Acceptor Cable

, —_ comounc @ Voltege Assembly wi mee cue a eicctacs sopra

OPTIONAL

DOLLAR

al

VALIDATER

Country Specific Fuse i Note 2) Le 3 LeveL HOT Bx SED, BLK 999999.

CONNECTS TO

LINE Jory yeu 5 2] MAIN HARNESS

pieg saMog leno sie pay aK WET]

46064]

Power

cOWMONING BLOCK

Inlet Mounting Plat 0 0y5 lec Power untry Specific ‘ord FLUORESCENT LAMP

N HARNESS

SPEAKER GRILL Buoy

9909.

NOTE 1: All E connect Plate located in the In4

let_ Mounting lor Cabinet a PEAKER CABLE

NOTE 2: THERE ARE 2 THINGS THAT MUST BE CI OPERATION ON OTHER LINE VOLTAGES.
  • RATING OF CIRCUT BREAKER FUSE INTERCONNECT CABLE CHAPTER 5 WIRING Power Wiring Diagram
Page 87

DIP SWITCH U13 SETTING TABLE CHAPTER 5 WIRING

FUNCTION swi | Sw2 | Sw3 | SW4 | SWs | SWée | SW7 | SWS DIP COINAGE OFF CMOS COINAGE ON* USA 13 GERI FR ECA1 UK1 ECA OFF* | ofr. | OFF USA 11 GER2 FR ECA2 UK2 ECA ON | ofr | OFF USA 10 GER3 FR ECA3 UK3 ECA OFF | ‘ON | OFF USA 1 GER4 FR ECAd UK4 ON | ON | OFF USA DC8 GERS FR ECAS UK5 OFF | OFF | ON USA DC6 GER ECA1 FR ECA6 UK6 ECA ON | Orr | ON USA DC5 GER ECA2FR ECA7 UK7 ECA OFF | ON | ON USA DC1 GER ECA3 FR ECA8 ON | ON | ON FREE PLAY (UK) On | on | ON USA OFF* | OFF* FRANCE ON | OFF GERMANY OFF | ON UK* ON | ON

DIP Switch Setting for Coinage There are many ways to select the type and quantity of currency recognized by the game machine.

  • The most common coin combinations for several countries are pre-programmed and may be selected from the table when Standard Pricing is activated (see Game Adjustments).
  • DIP Switch settings may be changed with the power switched on. Set any switch then observe the screen to verify that the desired selection is enabled. NOTE: If CMOS coin settings are active, switch settings for an individual Country will have no effect.
  • Some European countries may accept currency used in other countries. The most popular coinage settings are listed in the Pricing Table.

DIP SWITCH U12 SETTING TABLE (FAcTorY DEFAULTS IN BOLD)

Function swi swe2 SW3 SW 4 sws SW6 SW7 SW 8 Unused OFF ON Unused OFF ON Unused OFF ON Unused OFF ON Unused OFF

Brake Enabled Brake Disabled OFF

Unused OFF

Game Mode Test Mode OFF

Page 88

CHAPTER 5 WIRING

CPU BOARD JUMPER LOCATION TABLE

JumperJ1J2J3J4J5J6
LocationU28, PSU28, PSU28, PSU28, PSU28, P5U22, U27

CPU BOARD JUMPER POSITION TABLE

ROM TypeDefaultOptions*J1 | J2 | J3 | J4)J5J6
Boot (U27)27C080, 1M X 8, EPROM1-2 | 2-3 | 1-2 | 1-2
*27C040, 512K X 8, EPROM1-2 | 1-2 | 1-2 | 1-2

27C010, 128K X 8, EPROM 1-2 | 1-2 | 1-2 | 2-3 29F040, 512K X 8, Flash 2-3 | 1-2 | 23 | 1-2 29F020, 256K X 8, Flash 1-2 | 1-2 | 2-3 | 1-2 29F010, 128K X 8, Flash 1-2 | 1-2 | 2-3 | 1-2 Expansion (28) 27C080, 1M X 8, EPROM 27C040, 512K X 8, EPROM 27C010, 128K X 8, EPROM a

External Boot Boot from CPU ROM Empty Boot from SIO ROM

Notes on CPU Jumper Position

  • Boxes containing “----” means not applicable
  • Memory type numbers shown are for blank parts. Your game requires programmed parts.

SOUND SIO BOARD JUMPER POSITION TABLE

Jumper Location Function Meaning Position State

J1 (Note1)U9, Y3/O Connector P2 | Input ModePins1&2*
Output ModePins2&3
J2U35, U10Video SyncPositive SyncJumper not installed*

Negative Sync Pins 1&2

3 (Note 2)U15/O Connector P4 | Input ModePins1&2.

Output Mode Pins 2&3

J4NoneNoneNot usedNoneoa
J5 (Note 2)U15, P2/O Connector P4 | Input ModePins1&2.
Output ModePins2&3
J6NoneNoneNot usedNoneoa
J7NoneNoneNot usedNoneon
J8 (Note 1)U9, P4/O Connector P2 | Input ModePins1&2*

Output Mode Pins 2&3 Notes on SIO Jumper Position

  • Configure I/O port P2 by setting both jumpers J1 and J8 to input or output mode.
  • Configure I/O port P4 by setting both jumpers J3 and J5 to input or output mode.

MIDWAY AMUSEMENT GAMES, LLC

Page 89

CHAPTER 5 WIRING

SOUND I/O BOARD LED INDICATOR STATUS TABLE

LED Location Function Color State Meaning

LED 1Ut1Not Used (Remains Off)GreenOFF

(Note 1) ON BLINKING ~

LED 2U34, Y1Linking Connector StatusGreenOFFNot in use (No game linking)
(Note 2)ONLink continuity good
LED 3JAMMA | -5V power indicatorRedOFF*No power
(Note 2)ConnectorON*Normal operation
LED 4U35, P14 | +12V power indicatorRedOFFNo power
(Note 2)ONNormal operation
LED5P23+5V power indicatorRedOFFNo power
(Note 2)ONNormal operation
LED6U34, Y1_ | CPU linking activityRedOFFNot in use
(Note 2)ONCPU and ethernet contact
LED7U34, Y1Linking and transmissionRedOFFNot in use (No game linking)
(Note 2)of dataONSending data

BLINKING Normal operation

LED 8U14, Y1Audio activityYellowOFFNo sound boot ROM
(Note 1)ONLocked up

BLINKING Normal operation

LED9U34, Y1Linking receiving dataYellowOFFNot in use (No game linking)
(Note 2)ONReceiving data
LED10U44, Y2_ | Not used (Remains On)GreenOFF

(Note 1) ON BLINKING ~

LED 11U44, Y2_ | Not used (Remains On)RedOFF

(Note 1) ON BLINKING ~

LED 12U44, Y2__|Not used (Remains On)YellowOFF-
(Note 1)ON-

BLINKING ~

LED 13U44, Y2_ | Not used (Remains On)YellowOFF-
(Note 1)ONa

BLINKING ~

Notes on SIO LED Indicator Status

  • Software controls this LED. Indications are game and revision specific. Changing the EPROM’s on this board may alter the function of this LED. Firmware damage may also cause new or different LED behavior.
  • Hardware controls this LED. Indications depend on hard-wired circuitry. A change in normal LED behavior may indicate a circuit fault. Changing the EPROM’s on this board shouldn't alter the function of this LED.
Page 90

CHAPTER 5 WIRING

CPU BOARD LED INDICATOR STATUS TABLE

Device Location Function Color State Meaning

LED 1U6, U7, U163.3V CPU PowerRedOFFInsufficient power

ON Power OK BLINKING | Power supply fault

LED 2U28, PSDisk Drive Activity | GreenOFFDisk not in use

ON Locked up disk BLINKING | Normal disk activity

RP63U22, U26IndicatorRedOFF*

ON* See NOTE 3, below BLINKING*

Notes on LED Indicator Status

  • LED 1 monitors CPU power (+3.3V). If this LED is off or blinking, investigate processor circuits. If other LED’s are off or blinking at the same time, check +5V circuits or the game power supply.
  • LED 2 flashes when the hard disk is operating during game play. LED 2 may light continuously during start-up. If this LED remains lighted, the hard drive may be locked-up or faulty.
  • Software controls RP63. In this game, RP63 initially indicates program start-up stages. This LED is a seven-segment, alphanumeric display device. Normally, RP63 will display a lowercase “b” or “o” pattern with sequentially blinking segments. During Self-Test screens, RP63 displays a “bouncing bar” that resembles a hypen (“-”).

10 MiDway AMUSEMENT GAMES, LLC

Page 91

CHAPTER SIX

TROUBLESHOOTING

A

CAUTION This Video Game Machine (VGM) uses complex electronic components that are very sensitive to static electricity. Observe the following precautions before handling electronic assemblies. Failure to do so may void your warranty and could damage electronic assemblies.

Before servicing electronics, turn off AC power to the VGM. Wait for capacitors to discharge. Before touching or handling electronic assemblies, discharge static electricity on your body. To discharge static, begin by connecting the line cord to a properly grounded outlet, but do not turn on the power! Next, touch the safety ground stud of the power supply chassis. Store electronic assemblies in an anti-static area. Use anti-static bags to store or transport circuit boards. Transport the hard drive in original shipping container. Do not remove or connect electronic assemblies when the power to the cabinet is switched on. Otherwise you'll damage electronic assemblies and void the warranty. Replace ground wires, shields, safety covers, etc., upon completion of maintenance or service. Install and firmly tighten all ground and mounting screws.

Page 92

COIN MECHANISM AND PRICING TROUBLESHOOTING

Symptom Cause Required Action

+ Video Game Machine (VGM) accepts currency or tokens, but number of credits per coin or bill is incorrect. Improper settings at Pricing Menu 1. Press and hold TEST MODE switch inside coin door to enter Menu System. Select SWITCH TEST from Diagnostics menu. Conduct test to confirm operation of game switches. Select either the STANDARD or CUSTOM PRIC- ING MENU from Game Adjustments Menu.

Faulty wiring Confirm cabinet wiring is correct for this game. Assure coin meter and coin switches connect properly to control input wires.

VGM will not accept currency or tokens.

VGM will not enter play mode.

Audio and video are present. Improper currency Unlock and open cash door. Empty cash box and inspect revenue for counterfeit currency. Check vault. Remove any items that block path from mechanism.

Faulty coin mechanism POV Unlock and open coin door. Check each mechanism for proper mounting. Remove mechanism. Clear currency path. Reinstall mechanism and close latch.

Tilted coin mechanism or game yo Verify mechanism is level after doors close. Repair or replace coin door if it is bent or damaged. If necessary, adjust cabinet leg levelers to keep mechanisms level.

Coin indicators do not light Burned-out bulb Burned-out bulbs may appear white or darkened. Check continuity with digital voltmeter. Replace burned-out bulb with an identically rated part.

Open fuse circuit Check fuse continuity with digital voltmeter. If fuse is blown, replace fuse with an identically rated part. If fuse isn’t blown, check wiring.

CAUTION Do not remove or install any connector when power is turned on. Installation under power will damage the circuit boards, ROM’s or hard disk and void the warranty.

TROUBLESHOOTING - 2 MIDWAY AMUSEMENT GAMES, LLC

Page 93

START UP TROUBLESHOOTING

SymptomCauseRequired Action
+ Video Game Machine | Power problem1.Check power is switched on.
(VGM) does not start.2.Make sure fans are turning. If not: Is the power

supply connected to its power cable? Is power + VGM appears com- supply turned on?

pletely non-functional.3.Plug cord into AC power outlet. Verify presence of

AC line voltage. No audio Improper line volt- Turn off power. Unplug AC line cord. Check line age switch setting voltage switch. If necessary, set it to agree with local AC line voltage. Retest game. No illumination

No video displayOpen fuse1.Turn off power. Examine AC fuse on power chas-

sis.

  • Examine DC fuses on cabinet wall or electronic equipment shelf.
  • Replace faulty fuses with identically rated parts.
  • Turn on game power. If fuse opens again, check DC wiring harness and connectors.
Faulty wiring1.Remove line cord. Test line cord, power plug, and

IEC connector for breaks or damage. Verify continuity of each wire in cord. Install cord on power chassis. Press connector firmly to seat it.

  • Assure that cabinet wiring harness connectors fully seat in corresponding power supply and board connectors.
  • Inspect wiring for breaks or damage. Video Game Machine _ | Faulty coinmech- | 1. Unlock and open coin door. Check each currency
(VGM) does not start.| anismacceptor to assure proper mounting. Verify each

release latch is closed and locked.

+ VGM accepts cur-2.Test mechanism with good and bad coins to see if

rency or tokens. mechanism accepts and rejects currency correctly.

+ Audio and video are3.Inspect to see if external acceptor indicators (Pric-

present. ing, Flashing Arrows, etc.) are lit.

  • Verify each acceptor operates properly by placing it in working game. Replace bad parts.
Faulty switches1.Press and hold the TEST MODE switch inside

coin door to enter Menu System. Select SWITCH TESTS from the Diagnostics Menu. Conduct test to confirm operation of each switch.

  • Assure no loose parts or wires are caught in switch contacts.
  • Check for continuity in each suspect switch connection (Common to Normally Open or Common to Normally Closed).
  • Replace faulty switches (bent levers, broken actuators, etc.).

C.A.R.T. FURY TROUBLESHOOTING - 3

Page 94

Symptom Cause Required Action

+ Video Game Machine (VGM) does not start.

+ VGM accepts currency or tokens.

+ Audio and video are present. Faulty wiring 1.

2. Assure no wires are caught in hinges, latches or switch contacts. Check wiring continuity from circuit board connectors to acceptors.

+ Video Game Machine (VGM) appears nonfunctional.

+ Currency acceptor

nated. price indicator is illumi- Power problem Inspect circuit boards under low-light conditions. The LED’s glow and the fan turns when processor circuits receive voltage and indicate presence of DC from power supply. However, voltages or signals may not be normal. Turn on power. Set the digital voltmeter to the 20volt DC setting and measure DC voltages at power connector pins. Adjust the +5V source if necessary. Refer to the Cabinet Wiring Diagram for specific wiring information and voltage limits. Set the digital voltmeter to the 2-volt AC setting and measure DC voltages at power connector pins. Any reading here indicates that supply voltages are unstable and may contain ripple or noise.

Faulty wiring Turn off power. Check wiring harness connectors attach and fully seat onto mating board connectors. Verify harness connects to CPU Board. Check other connectors in same way.

Improper DIP switch settings Check DIP switch settings.

Faulty circuit boards Run power-up self-test sequence. Note errors or failures during test. Compare LED’s with LED indicator status charts. Note discrepancies. Press and hold TEST MODE switch inside coin door to enter Menu System. Select MONITOR TEST from Diagnostics Menu. Conduct test to confirm operation of each screen used in the game.

TROUBLESHOOTING - 4 MIDWAY AMUSEMENT GAMES, LLC

Page 95

LINKING PROBLEM TROUBLESHOOTING

SymptomCauseRequired Action
* Cannot connect multi- | Faulty wiring1.Do not extend linking cables supplied with VGM.
ple Video Game2.Install required crossover between cabinets. Each

Machines (VGMs) coupler connects two VGMs (one pair). Do not use together standard telephone type couplers or wiring for linking.

  • Use only 10 Base-T, Ethernet-type, Category 5, twisted-pair wiring.
Improper linking1.Use required network hub for your local network.

hardware A Hub Link Kit permits up to four VGM connections. Array completion requires basic kit brackets and spacers.

+ VGM does not recog- | Improper settings | 1. Record any error messages that occur during selfnize other players in test.

linking operation2.From the Diagnostic Menu select DIP SWITCH

TEST. Confirm the link is enabled.

+ VGM functions nor-3.Be sure that each VGM has a unique ID number.
mally by itself4.Select LINKING TEST from the Diagnostic menu.

Run tests for each linked VGM.

Power problem1.Verify the hub receives power. AC adapter wires

are thin and easily damaged.

Faulty wiring1.Inspect hub indicator lights. Illuminated indicator

(3 or more VGMs) lights for each active port light up if the cable(s) are properly connected. Check for cable continuity from hub to VGM for each indicator that failed to light.

  • Assure no loose wires are caught in hinges, doors or under cabinet.
  • Verify linking cable connects to CPU Board for each game.
  • Verify each linking cable operates properly by placing it in working game.
CAUTION Do not remove or install any connector when the power is turned on. Installation under power will damage the circuit boards, ROM’s or hard disk drive and void the warranty.

C.A.R.T. FURY TROUBLESHOOTING - 5

Page 96

LINKING PROBLEM TROUBLESHOOTING

Symptom Cause Required Action

+ Some Video Game Machines (VGMs) in group link properly, while others do not Improper hub switch setting 1. Assure switches on hub are set according to Hub Link Kit instructions. (VGMs on a network do not require couplers. Hub has electronic crossover.) Inspect hub indicator lights for link activity. See manufacturer’s literature for diagnostics.

Wrong software version Verify all linked VGMs use same version of software. Error message “VERSION MISMATCH’ will appear if you try to link different versions. Contact your distributor.

Faulty wiring (2 VGMs) 1. Insert only the supplied crossover connection between coupled VGMs. Standard couplers appear identical to devices supplied with games, but do not include an internal crossover. Verify each linking crossover coupler operates properly by placing it in a working link between two VGMs.

Faulty wiring (3 or more VGMs) Use an additional crossover connector and cable to extend game or hub link connection. Two crossovers cancel each other out and results in same problem as no link crossover. Connect cables directly to hub. Do not use a crossover coupler and hub together in single network. Separate communications wiring from other wiring. Wires that must cross can only cross at right angles to limit noise pickup.

CAUTION Do not remove or install any connector when power is turned on. Installation under power will damage the circuit boards, ROM’s or hard disk drive and void the warranty.

TROUBLESHOOTING - 6 MIDWAY AMUSEMENT GAMES, LLC

Page 97

PLAYER CONTROL TROUBLESHOOTING

Symptom Cause Required Action

+ Intermittent or completely non-functional player controls

+ Video Game Machine (VGM) starts normally. Faulty switches or lamps 1. Press and hold TEST MODE switch inside coin door to enter Menu System. Select SWITCH TEST from Diagnostic Menu. Conduct tests to confirm switch operation. Press and hold TEST MODE switch inside coin door to enter Menu System. Select LAMP TEST from Diagnostic Menu. Conduct tests to confirm lamp operation. Check for loose parts or wires caught in switch contacts. Check continuity at each switch connection (Common to Normally Open or Common to Normally Closed). Verify player control operates properly by placing it in working VGM. Verify light bulbs used for dashboard switches are type specified in parts listing. Other types will light, but may produce too much heat. Excess heat may cause switches to bind.

Faulty switch wiring Check for wires caught in door hinges, latches, or switch contacts. Verify harness connectors are attached and fully seated. Assure control switches connect properly to control input wires. Check cabinet wiring is correct for this VGM.

+ Steering pulls to one side Faulty Wheel Driver Board Find power amp on Wheel Driver Board’s large heatsink. Test and replace bad part or board.

+ No wheel feedback

  • Steering aims vehicle as expected Improperly set feedback Select STEERING WHEEL TEST on the Diagnostics Menu. Set feedback to match player requirements. Maximum force may be too extreme for very young or inexperienced customers.

Faulty circuit Examine fuses and cables on Wheel Driver Board. Check cables and wiring between CPU board, wheel driver and motor. Check resistance of motor series resistors. Replace bad parts.

Faulty motor Turn off power. Open dashboard. Support steering wheel and remove outer mounting screws. Remove metal shield (if VGM has one) over motor. Unscrew caps. Inspect motor brushes. Replace worn parts.

TROUBLESHOOTING - 7

Page 98

Symptom Cause Required Action

+ Sloppy, unpredictable or ineffective steering

+ Video is present

+ Video Game Machine (VGM) operates normally Blocked or faulty fan Fan located on power supply functions as an exhaust fan. With power on, check airflow near each fan to assure that nothing blocks airflow.

Faulty mechani- Turn off power. Open dashboard. Support steering cal parts wheel and remove outer mounting screws. Remove metal shield (if VGM has one) over motor. Inspect for faulty or worn belts, bearings, couplings, gears, etc.

Faulty Wheel 1. Inspect Wheel Driver Board under low-light condi- Driver Board tions. To indicate presence of AC from the transformer the LED’s glow when voltage is received. However, voltages or signals may not be normal.

  • Examine fuses and cables on Wheel Driver Board. Replace bad fuses. Use digital voltmeter to verify AC voltage between each fuse holder and ground. You should measure approximately 25V. See Wiring Diagram.
  • Use the 20-VAC setting on digital voltmeter to measure DC voltage at motor. Do not move steering wheel, drive belt, or motor while making this measurement. Any reading indicates unstable supply that may contain ripple or noise.
  • Select the STEERING WHEEL TEST from the Diagnostic Menu. Follow on-screen instructions to verify operation of the wheel motor and steering position sensor.
  • Verify proper operation of Wheel Driver Board by placing it in working VGM.

Loose or worn drive belt

  • Turn off power. Open dashboard. Support steering wheel and remove outer mounting screws. Remove metal shield (if VGM has one) over motor. Inspect for faulty or worn belts, bearings, couplings, gears, etc.
  • If drive belt isn’t worn or damaged, check its tightness.

Inability to make a transmission selection.

Video Game Machine (VGM) operates normally. Improper DIP Switch setting(s) From the Diagnostics Menu, choose DIP SWITCH TEST. Make sure DIP 1, SW 1 is set to the OFF position.

WARNING A The Wheel Driver Board heatsink, power resistors, and other components may be very hot. The DC Motor in the steering wheel may also be hot.

TROUBLESHOOTING - 8 MIDWAY AMUSEMENT GAMES, LLC

Page 99

VIDEO TROUBLESHOOTING

SymptomCauseRequired Action
+ Monitor appears non-Power problemVerify connection of AC Power to video monitor. Inspect

functional neck of CRT in dim light. Glowing filament near CRT base confirms monitor circuits receive power. However, voltages + Audio is present or signals may not be normal.

Faulty wiring1.Turn off game power. Verify that video signal and

+ Video Game Machine (VGM) controls oper- Remote Adjustment Board connectors seat properly on Video Monitor Board. ate normally 2. Assure that no wires are caught on chassis or

mounting brackets.

Improper monitor | Check BRIGHTNESS (intensity) and CONTRAST are adjustments set above their minimum levels. Faulty monitor cir- | 1. Examine AC line fuse on Video Monitor Board. If cuitry fuse is faulty, replace it with an identically rated fuse.

  • If the fuse is good, verify video monitor operates correctly by placing it in a working VGM.
  • If monitor is bad; Check monitor power supply.
  • |f the power supply is good, Check monitor horizontal output transistor and related circuitry.
+ Graphic images fromImproper compo-1.Verify circuit boards are correct for this game.

game do not appear nents Labels on each board record manufacturers’ name, assembly number and hardware version.

+ No audio2.Verify ROM instruction set is correct for this game.

Game set includes more than one ROM. Label on + Power-up self-test each ROM records assembly number and softruns ware version.

Faulty Circuit1.Allow game to load normally. Note and record any

Board error messages that occur during self-test.

  • Press and hold TEST MODE switch inside coin door to enter Menu System. Select Diagnostic Menu from the Main Menu. Then select CPU BOARD TEST. Conduct this test to check operation of critical components.
  • Turn off power. Inspect CPU Board to ensure JAMMA cable connector is fully seated onto the mating edge connector of the CPU. Check all other cable connectors for correct alignment and continuity.
  • Compare activity of LED’s on CPU with the CPU Indicator Chart.

C.A.R.T. FURY TROUBLESHOOTING - 9

Page 100

Symptom Cause Required Action

Power Problems

  • Turn on Power. Use 20-volt DC setting on digital voltmeter to measure DC voltages present at Power connector pins. Verify +5V source if it is adjustable. Refer to Cabinet Wiring Diagram for specific wiring information and voltage limits.
  • Use 2-Volt AC setting on digital voltmeter to measure DC voltages at Power Connector pins. Any reading indicates the supply voltages are unstable and may contain ripple or noise.

+ White areas at screen edges appear tinged with color Picture tube dynamic convergence is out of Have service bureau dynamically re-converge monitor. This procedure requires removing and repositioning yoke. Service bureau must follow instructions from alignment monitor manufacturer. + Dots at screen edges appear ovoid or cylindrical

+ Video images tear or | Faulty wiring 1. Check connectors and cables for wiring continuity. roll, or have black bar down middle of screen Video cables connect circuit boards to video monitor.

  • Assure connection of all cabinet ground wires, especially at video monitor chassis.

Faulty monitor circuitry

  • Verify video monitor operates correctly by connecting it to working Video Game Machine (VGM).
  • Assure video monitor is correct type for this game. Video monitors with wrong resolution can’t lock sync.

Improper sync signals

  • Check to see if Video Board puts out type of sync that your monitor requires.
  • Verify jumpers are set correctly for monitor.

Electromagnetic fields Move cabinet far away from machines, appliances, or competitors’ video games.

+ Missing colors Faulty wiring Check connectors and cables for wiring continuity from circuit boards to video monitor.

Faulty monitor color drive circuitry Verify video monitor operates correctly by connecting it to working Video Game Machine (VGM).

+ One color is dimmer or brighter than others

+ Whites appear tinted everywhere on screen Maladjusted color bias pots Turn on Video Game Machine (VGM). From Diagnostic Menu select MONITOR TEST. Watch Color Bars screen in mirror. Adjust three bias pots for best colors. (Most monitor neck boards include these pots.) Check White Screen. Touch up controls. If whites still seem tinted, have service bureau rejuvenate picture tube. PONS

On

TROUBLESHOOTING - 10 MIDWAY AMUSEMENT GAMES, LLC

Page 101

Symptom Cause Required Action

+ Picture is too narrow Maladjusted WIDTH pot. From Diagnostic Menu select MONITOR TEST. Watch Crosshatch Screen while adjusting WIDTH pot for best picture. You'll find this pot on Monitor Remote Control Board, behind coin door.

Picture is too short Maladjusted HEIGHT pot or damaged vertical circuit

  • From Diagnostic Menu select MONITOR TEST. Watch Crosshatch Screen while adjusting HEIGHT pot for best picture. You'll find this pot on Monitor Remote Control Board, behind coin door.
  • If pot has no effect, service vertical output circuit.

Picture seems shifted to one side Maladjusted HORIZONTAL POSITION pot From Diagnostic Menu select MONITOR TEST. Watch Crosshatch Screen while adjusting HORIZONTAL POSITION pot for best picture. You'll find this pot on Monitor Remote Control Board, behind coin door.

Keystone-shaped picture Shorted turns in yoke

  • Substitute working yoke.
  • Have service bureau converge monitor.
  • Retest monitor.

Blotches of color appear on screen Picture tube aperture mask is magnetized Demagnetize monitor with external degaussing coil. Take care not to magnetize neighboring games. Monitor may be left on or off during this procedure.

White areas in center of screen appear tinged with color

Object edges have fringe of one or more colors Picture tube purity or static convergence is out of alignment

  • Turn on Video Game Machine (VGM).
  • Press and hold TEST MODE to enter Menu System. Select Diagnostic Menu from the Main Menu. Select MONITOR TEST. Perform tests for Crosshatch, Red, Green and Blue screens to find clearest display of problem.
  • Display screen with the most severe problem.
  • Display Crosshatch Screen. Locate purity and static convergence ring magnets on back of monitor neck. Watch screen in mirror. Adjust magnets to minimize problem. Follow instructions from monitor manufacturer.
  • Display Crosshatch Screen. Touch up adjustments while watching screen in mirror.

+ Picture is dim or faded Maladjusted BRIGHTNESS pot or subnormal picture tube emission

  • From Diagnostic Menu select MONITOR TEST. Watch Color Bars screen. Adjust BRIGHTNESS and CONTRAST pots for greatest number of grays. You'll find these pots on Monitor Remote Control Board, behind coin door.
  • If pots have no effect, have service bureau rejuvenate picture tube.

TROUBLESHOOTING - 11

Page 102
CAUTION Do not remove or install any connector when power is turned on. Installation under power will damage the circuit boards or ROM’s and void the warranty. > &
WARNING: HIGH VOLTAGE. Video Game Machine (VGM) monitors generate and store potentially lethal high voltages. Avoid touching any part of the monitor until power has been off for some time. A picture tube can maintain a hazardous charge for up to several days. Only qualified technicians should service monitors. Turn off the power, unplug the VGM and discharge the CRT before attempting service. Even properly discharged tubes can revert to a highly charged state, without reapplication of power.
WARNING In normal operation, the monitor doesn’t require isolation from AC line voltage. During bench servicing, you may need to operate the monitor outside the cabinet. If you do, isolate the monitor from line voltage with an isolation transformer.

TYPICAL CUTAWAY REAR VIEW

CAUTION Do not operate the monitor without its Remote Adjustment Board. A

A

WARNING: HANDLE FLUORESCENT TUBE AND CRT WITH CARE. If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly eight feet or more from the implosion.

TROUBLESHOOTING - 12 MIDWAY AMUSEMENT GAMES, LLC

Page 103

AUDIO TROUBLESHOOTING

Symptom Cause Required Action

+ No audio

+ Video is present

+ Video Game Machine (VGM) appears to operate normally Improper volume setting Press and hold TEST MODE switch inside coin door to enter Menu System. Select VOLUME MENU from the Main Menu. Make sure the Attract Music is on (enabled). Verify all volume levels are set well above zero. If necessary, change levels to make game audible.

Faulty wiring Turn off power. Assure wiring harness connectors attach and fully seat onto mating board connectors. Verify harness connects to CPU Board. Check audio cable connectors in same way.

Faulty or Remove grilles and inspect speakers. Free speaker obstructed cones, terminals, mounting screws and magnets of speaker loose parts or wires.

Faulty Audio Verify proper operation of Audio Board by placing it in Board a working VGM.

Power Problems Use 20-volt DC setting on digital voltmeter to measure DC voltages present at Power connector pins. Verify +5V, -5V and +12V sources. Refer to Cabinet Wiring Diagram for specific wiring information and voltage limits.

+ Audio is distorted, muffled or has missing frequencies. Faulty or improper speaker

  • Turn off power. Remove grilles and check speakers. Verify that speakers are full range (100 to 10,000 Hz response) and rated for at least 20 watts. Woofers must be rated for at least 40 watts.
  • Verify proper speaker operation by placing speaker in question in a working VGM.

Faulty wiring Multiple-speaker installations: Check for reversed wires at one speaker. Weak or low frequencies and thin or hollow sound quality are symptom of incorrectly phased speakers. Sound tests may not detect this condition, but you can hear it during operation.

Improper Setting Press and hold TEST MODE switch inside coin door to enter Menu System. Select SOUND TEST from Diagnostics Menu. Increase volume as required. This test will verify some audio circuit functions.

+ Dead sound channel Faulty speaker

  • From Diagnostics Menu, choose SOUND TEST. Recheck speakers with audio signals provided by test.
  • Verify proper speaker operation by connecting speaker in question to working Video Game Machine (VGM).

TROUBLESHOOTING - 13

Page 104

Symptom Cause Required Action

Faulty circuit Run power-up self-test sequence. Note errors found board during tests. Compare CPU Board LED’s with LED Indicator Status Charts. Note discrepancies.

  • Constant low hum Faulty wiring 1. Check cabinet wiring is correct. from all speakers.
  • Verify cabinet wiring provides separate wires (not common return) for each speaker.
  • Check connection of all cabinet ground wires.

Faulty power supply Use 2-Volt AC setting on digital voltmeter to measure voltages at speaker terminals. Any reading indicates unstable supply that may contain ripple or noise.

MISCELLANEOUS PROBLEM TROUBLESHOOTING

Symptom Cause Required Action

+ Marquee lamp is intermittent or non-functional

Video Game Machine (VGM) starts and plays normally Faulty fluorescent tube

  • Remove fluorescent tube from sockets. If you find cracks or darkened ends, install new lamp. Clean tube.
  • Check continuity of both fluorescent tube filaments.
  • Check lamp ballast is rated for local AC line voltage and frequency.
  • Verify fluorescent tube operates by placing it in working VGM.

Faulty lamp fixture

  • Verify lamp pins make good connection with socket contacts.
  • Check the ballast and/or starter are working properly.

Faulty wiring Measure fluorescent lamp AC voltages. Check wiring and connector continuity from AC power chassis to lamp assembly.

VGM operates normally

Cabinet becomes warm after several hours of use Obstructed fan

  • Check bottom and rear of cabinet for blocked airflow.
  • Move VGM away from sources of heat.
  • Turn off power. Remove dust from vent holes with high-power vacuum cleaner.

Faulty Wiring Check fan wiring and connectors.

Faulty fan Check operation of all fans.

Error messages appear on screen Faulty hardware

  • Check any assembly (RAM, ROM, Battery, etc.) identified in error messages.
  • Call your authorized distributor for help with unresolved screen messages.

TROUBLESHOOTING - 14 MIDWAY AMUSEMENT GAMES, LLC

Page 105

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 106

WARNINGS & NOTICES

WARNING Use of non-MIDWAY parts or circuit modifications may cause serious injury or equipment damage! + Use only MIDWAY authorized components and parts. Failure to do so will void your warranty and may result in incorrect or unsafe operation. Substitute parts or modifications may void the EMC directive or FCC type acceptance. Federal copyright, trademark and patent laws protect this Video Game Machine (VGM). Unauthorized modifications may be illegal under Federal law. The modification ban also applies to Midway Amusement Games, LLC and VGM logos, designs, publications and assemblies. Moreover, facsimiles of MIDWAY equipment (or any feature thereof) may be illegal under federal law, regardless of whether or not such facsimiles are manufactured with Midway Amusement Games, LLC components.
WARNING Prevent shock hazard and assure proper VGM operation. Plug this VGM into a properly grounded outlet. Do not use a cheater plug to defeat the power cord’s grounding pin. Do not cut off the ground pin.
WARNING A very small portion of the population has a condition which may cause epileptic seizures or momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, discontinue use immediately and consult your physician.

CAUTION Information in this manual is subject to change without notice. MIDWAY reserves the right to make improvements in equipment function, design, or components as progress in engineering or manufacturing warrants.

COPYRIGHT & TRADEMARK NOTICE You may not reproduce any part of this publication by mechanical, photographic, or electronic means. You may not prepare phonograph recordings of this document. You may not transmit this publication or otherwise copy it for public or private use, without permission from the publisher.

CART FURY © 2000 Midway Amusement Games, LLC. MIDWAY and the M IN A CIRCLE DESIGN are trademarks of Midway Amusement Games, LLC. © 1999 Official Licensed Product of Championship Auto Racing Teams, Inc. All logos and marks of CART, its Teams, Drivers, Tracks and sponsors, are the property of CART and its respective Teams, Drivers, Tracks and sponsors and may not be reproduced, in whole or part, without the prior written consent of CART Licensed Products, Inc.

NOTICE This equipment generated, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interferance to radio communications.Operation of this equipment in a residantial area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

NOTICE When Midway Amusement Games, LLC ships a VGM, it complies with FCC regulations. Your label is proof of compliance. Legal repercussions to the owner or distributor may result if the label is missing or damaged. If your VGM does not contain an FCC compliance label, call Midway Amusement Games, LLC immediately.

For Service:Call your authorized Midway Amusement Games, LLC distributor.

Mipway AMUSEMENT Games, LLC 3401 N. CALIFORNIA AVE. CHICAGO, ILLINOIS 60618-5899 USA Visit our Web site at http://;www.midwaygames.com

Entire contents of this manual copyright © 2000 Mipway AMUSEMENT GAMES, LLC . All rights reserved.

Page 107

WARNINGS & NOTICES

WARNING Use of non-MIDWAY parts or circuit modifications may cause serious injury or equipment damage! + Use only MIDWAY authorized components and parts. Failure to do so will void your warranty and may result in incorrect or unsafe operation. Substitute parts or modifications may void the EMC directive or FCC type acceptance. Federal copyright, trademark and patent laws protect this Video Game Machine (VGM). Unauthorized modifications may be illegal under Federal law. The modification ban also applies to Midway Amusement Games, LLC and VGM logos, designs, publications and assemblies. Moreover, facsimiles of MIDWAY equipment (or any feature thereof) may be illegal under federal law, regardless of whether or not such facsimiles are manufactured with Midway Amusement Games, LLC components.
WARNING Prevent shock hazard and assure proper VGM operation. Plug this VGM into a properly grounded outlet. Do not use a cheater plug to defeat the power cord’s grounding pin. Do not cut off the ground pin.
WARNING A very small portion of the population has a condition which may cause epileptic seizures or momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, discontinue use immediately and consult your physician.

CAUTION Information in this manual is subject to change without notice. MIDWAY reserves the right to make improvements in equipment function, design, or components as progress in engineering or manufacturing warrants.

COPYRIGHT & TRADEMARK NOTICE You may not reproduce any part of this publication by mechanical, photographic, or electronic means. You may not prepare phonograph recordings of this document. You may not transmit this publication or otherwise copy it for public or private use, without permission from the publisher.

CART FURY © 2000 Midway Amusement Games, LLC. MIDWAY and the M IN A CIRCLE DESIGN are trademarks of Midway Amusement Games, LLC. © 1999 Official Licensed Product of Championship Auto Racing Teams, Inc. All logos and marks of CART, its Teams, Drivers, Tracks and sponsors, are the property of CART and its respective Teams, Drivers, Tracks and sponsors and may not be reproduced, in whole or part, without the prior written consent of CART Licensed Products, Inc.

NOTICE This equipment generated, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interferance to radio communications.Operation of this equipment in a residantial area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

NOTICE When Midway Amusement Games, LLC ships a VGM, it complies with FCC regulations. Your label is proof of compliance. Legal repercussions to the owner or distributor may result if the label is missing or damaged. If your VGM does not contain an FCC compliance label, call Midway Amusement Games, LLC immediately.

For Service:Call your authorized Midway Amusement Games, LLC distributor.

Mipway AMUSEMENT Games, LLC 3401 N. CALIFORNIA AVE. CHICAGO, ILLINOIS 60618-5899 USA Visit our Web site at http://;www.midwaygames.com

Entire contents of this manual copyright © 2000 Mipway AMUSEMENT GAMES, LLC . All rights reserved.

Page 108

WARNINGS & NOTICES

WARNING Use of non-MIDWAY parts or circuit modifications may cause serious injury or equipment damage! + Use only MIDWAY authorized components and parts. Failure to do so will void your warranty and may result in incorrect or unsafe operation. Substitute parts or modifications may void the EMC directive or FCC type acceptance. Federal copyright, trademark and patent laws protect this Video Game Machine (VGM). Unauthorized modifications may be illegal under Federal law. The modification ban also applies to Midway Amusement Games, LLC and VGM logos, designs, publications and assemblies. Moreover, facsimiles of MIDWAY equipment (or any feature thereof) may be illegal under federal law, regardless of whether or not such facsimiles are manufactured with Midway Amusement Games, LLC components.
WARNING Prevent shock hazard and assure proper VGM operation. Plug this VGM into a properly grounded outlet. Do not use a cheater plug to defeat the power cord’s grounding pin. Do not cut off the ground pin.
WARNING A very small portion of the population has a condition which may cause epileptic seizures or momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, discontinue use immediately and consult your physician.

CAUTION Information in this manual is subject to change without notice. MIDWAY reserves the right to make improvements in equipment function, design, or components as progress in engineering or manufacturing warrants.

COPYRIGHT & TRADEMARK NOTICE You may not reproduce any part of this publication by mechanical, photographic, or electronic means. You may not prepare phonograph recordings of this document. You may not transmit this publication or otherwise copy it for public or private use, without permission from the publisher.

CART FURY © 2000 Midway Amusement Games, LLC. MIDWAY and the M IN A CIRCLE DESIGN are trademarks of Midway Amusement Games, LLC. © 1999 Official Licensed Product of Championship Auto Racing Teams, Inc. All logos and marks of CART, its Teams, Drivers, Tracks and sponsors, are the property of CART and its respective Teams, Drivers, Tracks and sponsors and may not be reproduced, in whole or part, without the prior written consent of CART Licensed Products, Inc.

NOTICE This equipment generated, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interferance to radio communications.Operation of this equipment in a residantial area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

NOTICE When Midway Amusement Games, LLC ships a VGM, it complies with FCC regulations. Your label is proof of compliance. Legal repercussions to the owner or distributor may result if the label is missing or damaged. If your VGM does not contain an FCC compliance label, call Midway Amusement Games, LLC immediately.

For Service:Call your authorized Midway Amusement Games, LLC distributor.

Mipway AMUSEMENT Games, LLC 3401 N. CALIFORNIA AVE. CHICAGO, ILLINOIS 60618-5899 USA Visit our Web site at http://;www.midwaygames.com

Entire contents of this manual copyright © 2000 Mipway AMUSEMENT GAMES, LLC . All rights reserved.