18 Wheeler DLX Addendum
18 Wheeler: American Pro Trucker (deluxe, Rev A) (Sega, 2000) · Addendum · 11 pages · 15 sections · original scan
Ist Printing: Feb 6, 2000
SEGA
PR AEA Pd ven ree
ADDENDUM TO OWNERS MANUAL
SEGA ENTERPRISES, INC. USA MANUAL ADDENDUM: 999-0900
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.
Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.
OPTIONAL DOLLAR BILL ACCEPTOR
@ THE COIN DOOR ASSEMBLY USED ON 18 WHEELER COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION.
@ THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING VALIDATORS:
HOLE POSITION#1 Mars 2000 series (UNIVERSAL MOUNTING POSITION) Cash Code DBV
The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series upstacker. A 2000 series stacker can be added by simply removing the DBA entry plate and replacing it with Mars stacker. This two entry door can be ordered through Happ Controls or one of Happ Controls authorized distributors. The part number is 40-3000-00. The Mars stacker can be obtained through an autherized Mars distibutor.
REPLACE THIS PAGE (PAGE#56 in the ORIGINAL MAUAL)
10 - 2 VOLUME ADJUSTMENT/REPLACEMENT
Volume adjustment/replacement should be performed after the HANDLE MECHA has been removed as per 10 -1.
ADJUSTMENT
@ In order to turn the HANDLE SHAFT, insert the STEERING HANDLE to the HANDLE
SHAFT.
- Secure the HANDLE at the centering position.
@ Loosen the 2 screws which secure the VOLUME BRACKET to push the gear out of mesh. @ With the HANDLE SHAFT being the centering position, bring the gear into mesh so that the status of the volume’s shaft is as shown in the Fig below.
() Fasten the screws securing the VOLUME BRACKET.
©) After work is finished, perform volume setting in the Test Mode.
“D” CUT FACE (HANDLE SHAFT)
MAx14, wiflat & spring washers
“D” CUT FACE (VOLUME)
MODIFICATIONS TO THE DESIGN RELATED PARTS
ING dled HEMLINE AV TS
MODIFICATIONS TO THE PARTS LIST
For all US modified parts you will notice that on the corresponding
table it calls out LOCAL PURCHASE. This is to mean that these items cannot be purchased through SEGA’ S SERVICE DEPARTMENT and can be obtained at a local hardware store or a specialty store.
MODIFICATIONS TO PARTS ASSY #PTR-2500 (ASSY CHANGED TO PTR 1-2500)
PART NOT LISTED OR SHOWN IN DRAWING #999-0901 Base Handle Reinforcement Brkt Attached to Item #3 (Part No. PTR-2504 BASE HANDLE MECHA/NEW Part No. PTR1-2504) IN ADDITION Item #19 (Part No. SPG-2109 STOPPER RUBBER has been modified/NEW Part No. SPG1-2109) These parts are used for extra support and are included in all US manufactured games.
E
PART NO. 999-0901 Base Handle reinforcement brkt.
MODIFICATIONS TO PARTS ASSY #PTR-1000 (ASSY CHANGED TO PTR1-1000) PART NOT LISTED OR SHOWN IN DRAWING #999-0902 (2) Steering Reinforcement Brkt Attached to a portion of the wooden cabinet, these brackets (one for each side) ensure that force excerted upon the Steering Assy does not damage the wooden frame. This part is used for extra support and is included in all US manufactured games.
PART NO. 999-0902 (qty. 2 Steering reinforcement brkt. (one for each side)
MODIFICATIONS TO PARTS ASSY #PTR-1000 (ASSY CHANGED TO PTR1-1000) PART NOT LISTED OR SHOWN IN DRAWING #999-0903 (3) Steering Spoke Cover Upper PART NOT LISTED OR SHOWN IN DRAWING #999-0904 (3) Steering Spoke Cover Lower Attached to Item #32 (Part No. PTR-2501 STEERING HANDLE) These parts are used for extra support/safety and are included in all US manufactured games.
Location of Spoke Covers
Steering Handle
MODIFICATIONS TO PARTS ASSY #PTR-1200 COIN DOOR ASSY (ASSY CHANGED TO PTRI1-1200)
OLD NUMBERS ITEM NO. PART NO. 101 220-5237-91~ 220-5482-91~
NEW NUMBERS ITEM NO. PART NO. 101 40-3000-00 DESCRIPTION ASSYC.C. 2DR ASSYC.C. 2DR
DESCRIPTION ASSY C.C. 2DR*
*See coin door insert on the following page for an exploded view of coor door assy. (Prior to Part list Modifications.)
*This part can only be ordered through Happ Controls or a Happ Controls Distributor.
MOUNTING DIMENSIONS
peat
EXPLODED VIEW OF US COIN DOOR ASSY
42-1045-00
= 43-1003-00 43-1002-00 aoe (2 PLACES)
91-1219-00 42-0351-00. » «3a & 42-0065-00 42-0063-00 5 lech Holder with Coin switch 42-9339-00 ech Holder without Coin weltch 42-7355-00 :oin Switch 42-7087-00 screw for Coin Switch 3-0196-00 fetal Clip 42-7338-91 ‘humbscrew for Metal nip 42-7338-90 43-0021-00
MODIFICATIONS TO THE PARTS LIST (cont’d) REPLACED HARDWARE COMPONENTS (screws, nuts, etc..)
ITEM DESCRIPTION QTY.
SEAT COVER -TOP REAR SCREW MS BO M4X16 SC BT TMP (TOP) SCREW MS CHM M4X20 SC BT TMP (BOTTOM)
CONTROL PANEL COVER SCREW MS BO M4X16 SC BT TMP
S/A REAR DOOR (W/LOCK. VENT SCREW MS BO M4X16 SC BT TMP
VENT (SEAT CAB SCREW MS BO M4X16 SC BT TMP
S/A MUFFLER PANEL (TO CAB’ SCREW MS BO M6X30 SC BT TMP.
S/A MUFFLER SCREW MS CRM M4X12 SC BT TMP (TOP / BOTTOM OF MUFFLER [4] ) (MUFFLER PNL [6] )
STEERING WHEEL SCREW MS BO SCREW M4X25 SC BT TMP.
SEAT CUSHIONS SCREW MS BO M6X30 SC BT TMP
START BUTTON PLATE SCREW MS CRM M4X12 SC BT TMP
HORN BUTTON PLATE SCREW MS CRM M4X12 SC BT TMP
GRILLE-SEAT ACCESS SIDE SCREW MS BO M4X20 SC BT TMP.
AC UNIT SCREW MS BO M4X20 SC BT TMP.
GRILLE (BACK OF SEAT. SCREW MS CRM M4X20 SWC BT TMP.
COVER TOP-FRONT SCREW MS BO M4X20 SC BT TMP
COIN BOX MTG BRACKET SCREW MS BO M4X20 SC BT TMP
MARQUEE TO CABINET SCREW MS BO M5X55 SC BT TMP
CABINET FRONT TO MONITOR CAB SCREW MS CRM M5X45 SC BT TMP
VENT SCREW MS BO M4X16 SC BT TP
MARQUEE COVER SCREW MS CRM M4X20 SC BT TP 1 NOTE: with regards to the items
@ detailed at left. Those that are sn the screws pertain to. The quanti
underlined are the assemblies that sn the screws pertain to. The quantities of both the assemblies and the 1 screws are listed to the right of 2 + . 8 each item in brackets.
18)
[20]
‘I
[10]
I
I
‘I
12]
4) i
i
i
AI
I
VISIT OUR WEBSITE!
S ndaa i+ Sareea ee ©
2 pee Deed ale oe dee! Ge es! Peel eee oe he
St eo! EY rien foe ent Bs eee
SEGA ENTERPRISES, INC. (USA)
45133 Industrial Drive Fremont, CA 94538 415.701.6580 phone 415.701.6594 fax