CATHODE RAY TOMES

X-Men Children of the Atom

X-Men: Children of the Atom (Europe 950331) (Capcom, 1994) · Manual · 20 pages · 27 sections · original scan

Page 1

CHILDREN OF THE ATOM

X-Men TM & © 1994 Marvel Entertainment Group, Inc. All Rights Reserved. ©CAPCOM 1994 All Rights Reserved. This video game is produced under license from the Marvel Entertainment Group, Inc.

MANUAL

WARNING

This game is for use in the Western Hemisphere. Sales, export or operation outside of these countries may be construed as copyright and trademark infringements and is strictly prohibited. Violators are subject to severe penalties and will be prosecuted to the full extent of the law.

® 19-0018

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3
WARNING

THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.

WARNING: This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instruction manual, may cause interference to radio communication. It has been tested and found to comply with the limits fora CLASS A computing device pursuant to SUBPART J and PART 15 of FCC RULES, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.

CAPCOM INVITES YOU TO USE

OUR SERVICE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER CAPCOM GAME YOU NOW HAVE ON LOCATION. PLEASE HAVE GAME SERIAL NUMBERS AND CABINET NUMBERS READY.

CALL US FOR PROMPT, COURTEOUS ANSWERS TO YOUR PROBLEMS

ANSWERS TO YOUR PROBLEMS.

DIRECT NUMBER _ 1-800-833-0190

Page 4

WARRANTY, REPAIR AND RETURN POLICY

LIMITED WARRANTY CAPCOM warrants only to the initial purchaser of its products that the items listed below are free from defects in material and workmanship under normal use and service for the warranty periods specified:

A. C.P.S. I PCB 1 Year B. Electronic Components (90) Days C. Television Monitors (90) Days

No other parts of products are warrantied. Warranty periods are effective from the initial date of shipment from CAPCOM to it’s authorized distributors. This warranty does not apply to any parts damaged during shipping or handling, or due to improper installation or usage or alternation. CAPCOM disclaims any warranties not provided herein, including any warranties of merchantability or fitness for a particular purpose. In no event shall CAPCOM be liable for any anticipated profits, loss of profits, loss of use, incidental or consequential damages or any other losses incurred by the customer in connection with the purchase of CAPCOM products.

Page 5

CAUTION

In order to keep the PCB functioning properly, please follow the instructions below.

© Do not block the ventilation slots.

© Do not drop or bump the board.

e Do not spill any liquids on the case.

e Do not disassemble the case.

ATTENTION

battery is recyclable. At the end of its useful life, under various state and

es The product that you have purchased contains a rechargeable battery. The

local laws, it may be illegal to dispose of this battery into the municipal waste system. Check with your local solid waste official for details in your area for recycling options or proper disposal.

DISASSEMBLING THE CASE OR REMOVING THE STICKER MAY CAUSE THE TERMINATION OF YOUR REPAIR WARRANTY.

Page 6

PARTS LIST

There are two different kits available for X-Men. The first kit below is the full kit which includes PCB, all necessary graphics, buttons, joysticks and a volume/test bracket. This kit is used for a cabinet that will be upgraded with the CPS II board for the first time. The second kit is called the "B" Kit. This kit is for any game that already uses the CPS II board (Super Street Fighter II, etc.). This kit includes the "B" board, all necessary graphics and volume/test bracket. You just remove the top cartridge off the motherboard and replace with the new cartridge.

XM1000 X-Men Kit

Part No. Description Qty.

XM1400X-Men A/B PCB1
06-0109X-Men Monitor Card1
06-0110X-Men Marquee1
06-0111X-Men Control Panel Overlay1
06-0112X-Men Side Graphics2
16-01301 Player Button1
16-01312 Player Button1
16-0133Red Button4
16-0136Green Button4
16-0134Blue Button4
GE2030Joystick2
03-0050Volume/Test Bracket1
19-0018X-Men Manual1
03-006634 Pin Harness1

XM1000B X-Men B Kit

Part No. Description Qty.

XM1400X-Men "B" PCB1
06-0109X-Men Monitor Card1
06-0110X-Men Marquee1
06-0111X-Men Control Panel Overlay1
06-0112X-Men Side Graphics2
19-0018X-Men Manual1
Page 7

CONTROL LOCATIONS

  • SAMPLE CONTROL PANEL LAYOUT SHOT 3 SHOT 2 PUNCH SHOT 1 PUNCH PUNCH (aD) =)

MOVE MOVE GEavyy

Ss LEFT (@) RIGHT eniy, S”

GD SHOT 6

SHOT 5 KICK SHOT 4 KICK KICK

  • VOLUME AND TEST CONTROL SWITCHES ON BOARD

Volume Control

The volume control of this unit can be adjusted by pressing the volume-up switch and the volume-down switch. The setting you have selected will be stored even if the power is turned off. In the event that the volume setting does not work properly, press down on either the volume-up or the volume down button for at least five seconds, then set the volume again.

Test Switch

The test switch allows you to enter Test Mode. In Test Mode you can test game memory, input devices such as buttons and joysticks, and sound. You may adjust video components. It also allows you to change game configuration settings such as credits, difficulty, etc.

‘TEST SWITCH ‘VOLUME-UP SWITCH ‘VOLUME-DOWN SWITCH

Volume and Test Control Bracket

The full X-Men Kit (XM1000) inclues a Volume and Test Control Bracket. The buttons on this bracket are the same as the buttons on the PCB case. Mount this bracket where itiseasily accessible. The buttons are connected to the PCB via the 34 pin option connector. Refer to the CONNECTIONS section later in the manual. © SERVICE >@ < ¢ = a @k

Page 8

CONNECTORS

°JAMMA:JAMMA 56-pin connector
.1/O EXTENSION:Kick Interface and Volume Control
+AUDIO OUT:Used only for CAPCOM QSOUND cabinet

JAMMA CONNECTOR V/O EXTENSION CONNECTOR

SOLDER SIDE COMPONENT SIDE

GND34a
GND | A}1 | GND1P LIGHT KICK19| SKYBLUB ~~
GND | B | 2 | GND1P MIDDLE KICK17RED__S-———__|
+5V | C | 3 | 45V1P HEAVY KICK15BNK___o———6—__]

+5v | D | 4 #V Black

Nc.|E]5.C.GND |33
*1av | F | 6 | +12¥2PLIGHT KICK | 21ee

2P MIDDLE KICK KEL _—O——_O—J

Nc. | J | 8 | COUNTER19PURPLEYEL S———G,_]

LOCK OUT2 | K | 9 | LOCKOUTI oF RAYS RICK SPEAKER (-) | L | 10 | SPEAKER (+)

NC. | M]11 | NC.VOLUME UP29 | GRAY/YEL
VOLU31| Buackrwarre”|

FREECREDIT | R | 14 | VIDEOGND MecouMen N.C. | S | 15 | DIAGNOSTICS 2PCOIN | T | 16 | 1PCOIN 2PSTART | U | 17 | 1PSTART 2PuP | V | 18 | 1PUP 2P DOWN | W | 19 | 1PDOWN m a 2PLEFT | X | 20 | 1PLEFT 33 | QOOOo00o0o0o0000000nn |] 1 2PRIGHT | Y | 21 | 1PRIGHT 2P LIGHT PUNCH | Z | 22 | IPLIGHT PUNCH 34 | DOOoOOoo0000oOoOoLO | 2 2P MIDDLE PUNCH | a | 23 | 1P MIDDLE PUNCH 2P HEAVY PUNCH b | 24 | 1PHEAVY PUNCH NC. }] c | 25 | NC. ‘ ne | a|2/NC Harness Side GND | e | 27 | GND . GND | f | 28 | GND Note: The harness provided with this kit is fully stuffed with wires. Only the wiring above is required for use with the X-Men game. If you are converting from a Super Street Fighter or Super Street Fighter Turbo, you can use the existing harness in the game.

CONNECTOR LOCATIONS

AUDIO OUT (FOR QSOUND) (RIGHT: RED, LEFT-WHITE)

JAMMA 1/0 EXTENSION (USED FOR KICK BUTTONS AND VOLUME CONTROL)

Page 9

TEST MENU

The test menu allows you to test the functions and configure the game. These items include input devices such as joysticks, buttons and coin mechs, output devices such as monitor, speakers and meters. Through the Test Menu you can also access the Configuration Menu, where you can change the settings of the game.

  • ACCESSING THE TEST MENU

. For a CAPCOM cabinet, or a cabinet equipped with a test switch: Make sure the game is on and push the test switch. The screen shown below will appear. : For a cabinet without a test switch: Push the test switch on the side of the blue plastic game casing. Refer to the Controls Section of the manual.

INPUT

OUTPUT

SOUND & VOICE

COLOR

DOT CROSS HATCH

GAME DATA

CONFIGURATION

MEMORY CHECK

EXIT 1.

2.

3.

4.

5.

6.

7.

8.

9.

  • HOWTO SELECT AN ITEM

. Use the Player 1 Joystick to Move the arrow in front of the desired item and press the Player 1 PUNCH LIGHT button. . To return to the test menu, push the Player 1 Start and Player 2 Start Buttons simultaneously. The test menu automatically appears: . After you exit the "7. "CONFIGURATION MENU". ° After the memory is tested from the menu, "8. MEMORY CHECK".

  • CLOSING THE TEST MENU

To close the Test Menu, highlight "9. EXIT" and push the Player 1 LIGHT PUNCH button.

Page 10
  • TEST MENU ITEM DESCRIPTIONS

Used to test all the input switches, such as joysticks and buttons. ate The "0" changes to a "1" as the button is pushed or joystick is moved. Check connections and switches in case the "0" doesn’t change to a "1" when depressed or moved.

OUTPUT Used to test the coin meter and the coin lock

Select a code of SOUND or VOICE with the Player 1 Joystick. SOUND & VOICE Push the Player 1 A (LIGHT PUNCH) button to hear the sound of the selected code.

Shows color bars of red, green, blue and white. COLOR Adjust RGB and brightness to obtain the optimum color balance and solid black background.

DOT CROSS HATCH Used to test the screen size, focus and distortion.

Counter information and the average of the game played time will be GAME DATA . displayed.

CONFIG TION Used to change the game play settings. Refer to the CONFIGURATION

MENU section.

Used to test memory.

MEMORY CHECK "OK" appears when each block of memory Passes test

"ERROR" appears in case of malfunction. If "ERROR" appears, repeat the memory test. Contact your distributor if "ERROR" still appears.

EXIT Select this item and push the Player 1 (Light Punch) button to return to

game play mode.

Page 11

CONFIGURATION MENUS

The Configuration Menu is used to change various game settings such as level of difficulty, credits, sound configuration, etc. These settings are stored in memory on the PCB rather than DIP switches. To change configuration settings you must enter test mode and then access the Configuration Menu.

The Configuration Menu is divided into 2 sections. System Conifiguration, where you can change system changes such as credits, sound, and coin mech configuration. In the Game Conifiguration Menu you can change game play, such as difficulty level and game duration.

  • TOACCESS CONFIGURATION MENU

° From the Test Menu, move the arrow to "7. CONFIGURATION" and push the Player 1 LIGHT PUNCH button. The screen below will be displayed. A description of each option is discussed in the table below.

  • CONFIGURATION MENU

SYSTEM GAME DEFAULT SAVE & EXIT

SELECT = 1P UP OR DOWN START = 1P SHOT1

Use this screen to change system configuration such as credits, monitor SYSTEM SYS flip, sound and coin mech configuration.

Use this screen to change difficulty level, damage level, time count speed, GAME maximum number of rounds and event type.

Use this to return configuration to factory settings. To insure that settings DEFAULT are not defaulted by accident the Player 1 Light Punch and Medium Punch buttons must be pressed at the same time.

SAVE & EXIT Use this to save new configuration settings and exit to Test Menu.

Page 12

To access the System or Game Configuration Menus from the Configuration, move the arrow with the joystick until it is to the left of the desired menu and press the Player 1 Light Punch button. Below are samples of the System and Game Configuration Menus.

SYSTEM CONFIGURATION MENU

7-1. SYSTEM CONFIGURATION

COIN CONTINUE MONITOR FLIP DEMO SOUND SOUND MODE PLAY MODE EXIT

SELECT OPTION MODIFY SETTING

GAME CONFIGURATION MENU 2 COINS 1 CREDIT ON NORMAL ON

STEREO (QSOUND)

2 PLAYERS 2 CHUTES SINGLE

1P UP OR DOWN 1P LEFT OR RIGHT = 1P SHOT1 OR SHOT2

7-2. GAME CONFIGURATION

GAME DIFFICULTY 4 MEDIUM DAMAGE LEVEL 4 MEDIUM TIME COUNT SPEED 4 NORMAL MAX ROUND JOIN IN EVENT EXIT 3 ROUNDS ON OFF

SELECT OPTION = 1PUP OR DOWN MODIFY SETTING 1P LEFT OR RIGHT = 1P SHOT1 OR SHOT2

Page 13

2. CHANGING THE CONFIGURATION SETTINGS

. Move the Player 1 Joystick UP or DOWN to highlight the desired option. Once the option is highlighted, move the Joystick LEFT or RIGHT, or press the Player 1 Light Punch button to change the setting. Refer to the 4. Menu Settings section for option settings.

SAVING SETTINGS AND CLOSING THE MENU

. Once the configuration settings are changed in either the System or Game Configuration Menus, move the arrow to the EXIT option in each respective menu and press the Player 1 Light Punch button. This will return you to the Configuration Menu. . At the Configuration Menu move the arrow to 4, SAVE & EXIT and press the Player 1 Light Punch button. You will be returned to the Test Menu. . A message "SAVING NEW CONFIGURATION IN EEPROM" appears while new settings are being saved. It takes one or two seconds to save the new settings. Do not turn off the power switch while saving is in process. ° From the Test Menu move the arrow to 9. EXIT and press the Player 1 Light Punch button. This will return you to game mode.

MENU OPTION SETTINGS

System Configuiration Menu Settings

1 COIN1 COIN1 COIN1 COIN1 COIN

1 CREDIT 2CREDITS | 3CREDITS | 4CREDITS | 5 CREDITS

1 COIN1 COIN1 COIN1 COIN2 COINS

6CREDITS | 7CREDITS | 8CREDITS | 9CREDITS | 1 CREDIT COIN

3 COINS4 COINS5 COINS6 COINS7 COINS
1 CREDIT1 CREDIT1 CREDIT1 CREDIT1 CREDIT
8 COINS9 COINS2 COINS START
1 CREDITLereprr|i conconrinur|FREE PLAY

_L

CONTINUE ON OFF

MONITOR FLIP FLIP NORMAL

DEMO SOUND ON OFF

SOUND MODE STEREO (Q SOUND) MONAURAL

2 PLAYERS 2 CHUTES SINGLE

PLAY MODE 2 PLAYERS 2 CHUTES MULTI

2 PLAYERS 1 CHUTE SINGLE

Capcom recomended settings are in bold face.

Page 14

Game Configuration Menu Settings

1234

EASIEST VERY EASY EASY MEDIUM

GAME DIFFICULTY LEVEL 5 LEVEL 6 LEVEL7 LEVEL 8 MEDIUM HARD HARD VERY HARD HARDEST

1234

MINIMUM MEDIUM

DAMAGE LEVEL

5678

MAXIMUM

TIME COUNT SPEED1234

SLOW NORMAL

5678

FAST MAX ROUND 1 ROUND 3 ROUNDS | 5 ROUNDS

JOIN IN ON OFF

EVENTOFF1MATCH—_|SUDDEN DEATH 1 MATCH SUDDENDEATH

Capcom recomended settings are in bold face. After you change the setting, make sure to select "EXIT" and push the Player 1 Light Punch button. Choose STEREO (QSOUND) if your cabinet is equipped with the Qsound Speaker System, otherwise select MONAURAL for proper sound effect.

Page 15
  • MENU ITEM DESCRIPTIONS

System Configuiration Option Descriptions

COIN Sets the charge per play

CONTINUE Sets continuous play. ON: Continuous play is possible OFF: Continuous play is not possible

MONITOR FLIP Flips the screen. If the screen appears upside down, change the setting. FLIP: Upside down NORMAL: Right side up

DEMO SOUND Turns attract sound on or off.

SOUND STEREO or MONAURAL. STEREO: with QSOUND MONAURAL: without QQOUND QSOUND is available with CAPCOM QSOUND cabinets only. For other cabinet, please set to MONAURAL

PLAY MODE Sets the number of players and coin chutes. 2 PLAYERS 2 CHUTES SINGLE Two players use two coin chutes and play at the same time. With this setting, either player can start the game. 2 PLAYERS 2 CHUTES MULTI Two players use two coin chutes and play separately. With this setting, the game is started from the same side the coin chute was used. 2 PLAYERS 1 CHUTE SINGLE Two players use one coin chute and play at the same time. With this setting, the player whose coin was put in first starts the game.

EXIT To save the setting changes and return to the CONFIGURATION MENU, highlight this item and push the PLAYER 1 START button.

Page 16

Game Configuiration Option Descriptions

GAME DIFFICULTY Sets the game difficulty level. There are eight levels of difficulty with "1" being the easiest and "8" being the most difficult.

DAMAGE LEVEL Sets the attack damage level. There are eight levels of damage with "1" being the lowest level of damage and "8" being the highest

TIME COUNT SPEED Sets the speed of the countdown for the tim display. There are eight speed levels with "1" being the slowest time countdown and "8" being the fastest.

MAX ROUND Sets the number of rounds for winning. 1 ROUND: Winner of a single round wins 3 ROUNDS: Winner of 2 out of 3 rounds wins. 5 ROUNDS: Winner of 3 out of 5 rounds wins.

JOIN IN Determines whether or not it is possible to join in. ON: with join in OFF: without join in

EVENT Turns on event mode. Useful for Championship Tournaments OFF Normal setting. Sets the mode to normal operation.

1 MATCH Matches played with 1 credit. However, a win or a loss results in GAME OVER". CONTINUE is not available SUDDEN DEATH The player that takes the initiative wins. One stike settles the fight. 1 MATCH & SUDDEN DEATH Sets to 1 MATCH mode as well as SUDDEN DEATH mode.

EXIT Returns to the Configuration Menu

Page 17

MOUNTING THE PC BOARD

  • INSTALLING THE MOUNTING FEET
  • Turn the PCB upside down. + — Slide the 4 feet into place as shown.

Bottom of PCB

4 mounting feet are included in every full X-Men Kit (XM1000)

  • MOUNTING THE PCB

These screws are not included g

in the package.

Page 18

HOW TO REPLACE THE "B" CARTRIDGE

If you purchased a "B" Board Kit you only recieved the upper PCB (B Board). This will allow you to convert the game easily by just seperating the top "B" Board from the bottom "A" Board. It is very important only to seperate the top cartridge from the main board only. Dissasembling either case will void your warranty. Follow the instructions below to replace the "B" PCB.

° Remove the 2 case clamps. . Carefully pull the the "B" cartridge off the "A" cartridge. . To replace the "B" PCB carefully align the 4 connectors and press the PCB's into place. . Replace the 2 case clamps.

Case Clamp

Main Board

STICKER DESCRIPTIONS

Cartridge serial number sticker AAMA Serial number

Caution Sticker

ok) C6 Security Sticker

"A" Board Security Sticker ° [ om

"B" Board ~ Serial Number (bottom of case)

Country Sticker

Disassembling the individual cases or removing the Security Stickers will void your warranty!

Page 19

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 20

475 Oakmead Parkway Sunnyvale, CA 94086