CATHODE RAY TOMES

VS Super Mario Bros

Vs. Super Mario Bros. (set SM4-4 E) (Nintendo, 1986) · Document · 3 pages · 5 sections · original scan

Page 1

(Operation Manual)

. MDS (MGS) |. How to install Software ROMs

Each Software ROM is labeled with a Location Number shown on it ( KX Shaded Portion illustrated below), which indicates the corresponding location on the P.C. Board where it should be installed.

(Label on Software ROM)

“VS. SUPER MARIO BROS.” contains 6 Software ROMs and 2 Custom ICs which have location numbers 1A or 6A, 1B or 68, 1C or 6C, 1D or 6D, 2A or 8A, 2B or 8B, 2F or 8F (Custom IC) and 2J (Also Custom IC). Each ROM and Custom IC must be mounted in the proper IC Socket.

For VS. DUAL SYSTEM (two monitors) :Only one“VS. SUPER MARIO BROS.” can be installed. (Although any other VS.PAK except VS. TENNIS and VS. BASEBALL can be used in the other side.) “VS.SUPER MARIO BROS.” must be installed in the main (left) side of the cabinet. The EP-ROMs and Custom IC should use locations 1A, 1B, 1C, 1D, 2A, 2B and 2F. For VS.DUAL SYSTEM, you do not need to use the Custom IC (RP2A04) for position 2J.

For VS. UNISYSTEM (one monitor): You must use the Custom IC (RP2A04) for

position 2J. The EP-ROMs and Custom ICs must use locations 6A, 6B, 6C, 6D, 8A, 8B and 8F (SUB SIDE).

© ABcCcODE FH J KLM NPR ©

CAUTION: Make sure the Software ROMs and Custom ICs are inserted properly.

SW1 corresponds to this program. MAIN (Left side for two monitor game--Not used for one monitor game) Nd3-10-SOW

SW2 corresponds to this program. SUB (Right side for two monitor game--Also used for one monitor game) ©

ROM and IC Location on P.C. Board

Page 2

2. Points and methods of adjustment

Game Option Settings MDS P.C. Board

MDS FOR VS.SUPER MARIO BROS. 1 2 3 5 6] 7/8] coc swi sw2 CREDIT/COIN 1/1 OFF OFF OFF 1/2| OFF OFF ON

1/3|OFF ON OFF

2/1|OFF ON ON

3/1] ON OFF OFF

4/1| ON OFF ON

5/1 ON ON OFF!

SW1-MAIN FREE PLAY ON ON ON

(Left side for two monitor NUMBER OF LIVES 3 OFF. game--Not used for one MDS-CPU

12345678 12345678

monitor game) 2 ON

EXTRA LIFE COINS 100 OFF OFF) SWe2---SUB (Right side for two monitor 150 OFF ON

game--Also used for one 200 ON OFF! monitor game) 250 ON ON

TIMER SLOW

FAST

CONTINUE MODE 4 LIVES

Page 3

CAUTION

The suggested factory settings for VS. SUPER MARIO BROS.™ are listed below. It is recommended that you carefully check the dip switch settings prior to operation. For the VS. Dualsystem™ , the EPROMs and custom IC must be installed in the "main" side of the P.C. board and use SWl dip switches. Only one VS. SUPER MARIO BROS.™ can be installed in a VS. DualsystemIM ( although any other VS. Pak except VS. Tennis and VS. Baseball can be used in the "sub" side ). For the VS. Unisystem™ , the EPROMs and custom IC must be installed in the "sub" side of the P.C. board and use SW2 dip switches . For VS. Unisystem™M only , custom IC (RP2A04) must be installed in position 2J ( "main" side ). See operation manual for further instructions .

or ore [ar [ore] o [are [ove or

gO © I

main side

«

cy

z =

=

x

°

u

w

°

°

®

<

[C)