Donkey Kong Operation Manual (TKG-4-UP)
Donkey Kong (US set 1) (Nintendo of America, 1981) · Document · 22 pages · 8 sections · original scan
OPERATION MANUAL
| MODEL NO: TKG4-UP |
2P.C.BOARDS TYPE
- WARNING
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the inst-
ructions manual, may cause interference to radio communications.
As temporarily permitted by regulation it has not been tested for compliance with the limits for Class A computing devices pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will
be required to take whatever measures may be required to correct the interference.
CAUTIONS se eeee 1
SPECIFICATIONS ee ee ee 2
INSTALLATION OF THE MACHINE
- Cautions on installation see e eee ee 3
- Earthing of machine = = se aeeeeeees 3
MAINTENANCE AND INSPECTION
- Dismounting of front screen = = .---eeeeeee 4
- Dismounting of operation panel — ...eeeeeeee 4
POINTS AND METHODS OF ADJUSTMENT
- CPU P.C.Board ou we ee ewe 5
- Adjustment of Semi-Fixed Resistors eevee ee eres 6
- Video Monitor tte eet 7
WIRING AND CONNECTION = = wee ee eeeee 8
NAME OF EACH PART
- Body ee see 9
- Operation Panel Assembly 2 beets wee ee 11
PART LIST © titties 12
CAUTIONS
P.C.Board should not be exposed direct to the sun. Direct sunshine is very harmful to LSI(memory element).
P.C.Board to be stored or transported should be wrapped by a conductive pouch or aluminum foil, because LSI and IC used in the machine are semiconductor integrated circuits of which basic element is MOS-FET.
When images on the Video Monitor screen are disturbed by powerful noise or other electrical causes, turn the main power off once and then on again.
SPECIFICATIONS
Power Consumption
Size
Weight
Number of Player
Number of Jumpman 118W
600(W) X 850(D) x 1700(H)mm.
100 Kgs.
1 or 2 person(s)
3 ~ 6 (Adjustable)
Accessories Operation Manual 1 copy Key for Back Door : 2 pes.
Key for Coin Box Door : 2 pes.
Fuse : 4 pes. 100~120V : 5A X 1, 4A X 2, 0.3A X 1
220~240V : 4A X 2, 3A X 1, 0.3A X 1
3-1 Cautions on installation
(i)
(2)
(3)
(4)
(5)
(6)
(7) The power cord of the machine should not be connected to a wall outlet together with large load unit(s) such as motor, cooler,etc.
Turn the power off before setting and removing the P.C. Board and connectors. Carefully handle them.
Do not touch IC, LSI and other electronic parts on P.C. Board. Do not use a tester or the like on them. (They may be damaged by the inner voltage of the instruments. )
When exchanging a fuse, use a new one of the prescribed capacity.
The machine should be installed where it is not hot, keeping away from a heating appliance and direct sunshine.
The machine should be installed where it is not wet and dusty.
Do not touch the inside of the video monitor which has high tension units. Inform service station, if necessary.
3-2 Earthing of machine
(1)
(2) When the machine is installed in a wet place, it should be grounded to avoid accident by an electric shock.
- Connect an earthing wire to the earthing terminal of the machine.
- The opposite end of the earthing wire should be connected to an earthing bar which is firmly inserted i=) into the ground. —_—
Cautions
- Do not connect the earthing wire to a water pipe, because polyvinyl-choloride pipes are sometimes used in the water lines and, if so, the electronic continuity is cut at the points.
- Do not connect the earthing wire to the gas pipe abso- |_ _ lutely. That is very dangerous.
- MAINTENANCE AND INSPECTION
Front Screen
Operation Panel
Fastener
Front Door Dismounting of front screen
Opening the back door, pull the front screen clamp which is mounted under the top plate. Pull the front screen upward while pushing and then pull toward you.
Front Screen Clamp
Dismounting of operation panel
To dismount the operation panel for maintenance or inspection of the Control Unit or Micro Switch, open the front door and unfasten the fastener.
- POINTS AND METHODS OF ADJUSTMENT
5-1 CPU P.C.Board
The number of Jumpman, score level, the number of coin and type of machine can be set with the switches on CPU P.C.Board according to the diagram below.
TKG4-11-Cpu
Number of Jumpman
Score Level for extra Jumpman
7,000 points 10,000 points 15,000 points 20,000 points
Coinage
coin /1 coin /2 coin /3 coin /4 coins/1 coins/1 coins/1 coins/1
Table/Upright
Table Upright
5-2 Adjustment of Semi-Fixed Resistors
VIDEO P.C. Board
Semi-fixed resistors, VR1 and VR2 on VIDEO P.C. Board are used to adjust video monitor screen.
oa “ VR1 VR2
TKG4-11-VIDEO
VIDEO P.C.Board
VRI 50KQ2 1/3W top type C) Turn right to move white knob image downward.
VR? 50KQ_ 1/3W top type () Turn right to move white knob image leftward
CPU P.C. Board
Semi-fixed resistor, VR2 on CPU P.C. Board is used to adjust sound balance.
Q VR2
TKG4-11-CPU
CPU P.C.Board
| VR2 | ae ee plain type Balance of effective sound
5-3 Video Monitor
V-HOLD
H-CENT
BRIGHT
SOUND VOLUME
Fuse 4A
Video Monitor Main P.C. Board
Fuse 0.3A
- WIRING AND CONNECTION
Power Transformer
PT-BA PT-8218
FUSE,
100~120v 5a 200~240v 38
Fourescent Lamp ow
5P Sores Hames Connector
SERVICE SWITCH
Ps POWER
R 3 service POWER «fn pose ee Ne ee ° ' 7 i 8 H 9
Power 10
i i 1 ' P.C.Board Unit !) pa i P.78 2 | PowER if 4 IN ' 2 ° ! P11 ! SPEAKER ' ' i 0 i i ! eA i SOP ‘speaker | FLAT CABLE VIDEO P.C.Board rary) KO4-11-ViDEO
Ps E 3P Junoon SUB Pe P2 Harsess Conrotor 50P i FLAT CABLE. own No
CPU P.C.Board Harness Coneotor 7K04-11-0PU {9P Mae) Switch Harness Connector PARTS SIDE | SOLDERING SIDE
‘OND. A] eno newt ~-—0- cr) & | eno LEFT oe PS +8V | +ov
MAIN +5V | +5v no Haw fe| tv
=v F | ov 1 # | com ' zecaver | 4 | 1PLavER i sua rexT_| «| WAIN RIGHT EDcE | sub LEFT |u| MAIN LEFT IPLAYER ‘CONNECTOR! sus ue m[ wan uP 2PLAYER H sue cows [| mann Down ed TP Tower i ‘sua vump [P| MAIN JUMP
Harness Connector 1 R bore 2P Come Haess 15 S| Senwee
cone Pa 16] GND T | _GNO
a u| WR GOUNTER: 18] SYNC v| Ve
To] SPEAKER [w| Tv AUDIO P3 20] +z4v [x] counter COIN [21] _GNo | cNo
22] ono Z| ono
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
5 n° "| 18-01-01 0 “10-01 09-01- 1 O1-30 18-01-03 or | ai -03 03-01- “4 <—\
23-50 4 Way Control Lever A’ssy
- Operation Panel Assembly
23-31 2-22 23-32
-1t-
- PARTS LIST
- TKG4-Body
| No. | Name of Parts | | Q’ty| | Remarks | een |
TKGU-01-01-01 | Body 1 TKGU-01-01-02 | Transformer Base 1 TKGU-01-01-03 | Cash Box 1 TKGU-01-01-04 | Control Lever Ass’y Base 1 TKGU-01-01-05 | Back Door 1
| TKGU-01-02 | Coin Selector | 1 | T |
| TKGU-01-02-01 | Coin Switch | 1] | T | |
| TKGU-01-03 | Back Door Lock | 1 | |
| TKGU-01-04 | Front Door Lock | 1 | |
| TKGU-01-08 | Power Cord | 1 | |
| TKGU-01-10 | Strain Relief Bushing | 1 | T |
| TKGU-01-11 | Game Counter | 1 | T |
| TKGU-S51-12 | TKG4 P.C Board Mounting | 1 |
Bracket TKGU-01-13 | P.C.Board Support 16
| TKGU-01-22 | Operation Panel | 1 |
| TKGU-S51-23 | Front Screen | 1 |
| TKGU-01-24 | Name Plate | 1 |
| TKGU-01-28 | Front Door Ass’y | 1 |
| TKGU-01-29 | Fluorescent Lamp Ass’y | 1 |
| TKGU-01-30 | Caster | 2 |
| TKGU-01-31 | Operation Panel Ass’y | 2 |
Fastener (A)
| TKGU-01-33 | Service Switch | 1 | T |
| TKGU-01-39 | Control Lever Ass’y | 1 |
Mounting Plate
| TKGU-01-41 | Control Lever Knob | 1 | | |
| TKGU-01-43 | Speaker | 1 | |
| TKGU-01-53 | Front Screen Frame (Lower) | 1 | |
| TKGU-01-55 | Operation Panel Ass’y | 2 |
Fastener (B)
| TKGU-01-64 | Service Switch Bracket | 1 | |
| TKGU-01-65 | Strain Relief Bushing Plate | 1 | |
| TKGU-01-67 | Blind Cardboard (Large) | 1 | |
| TKGU-01-68 | Blind Cardboard (Small) | 1 | |
| TKGU-01-70 | Control Knob Plate | 1 | |
| TKGU-56-00 | VIDEO P.C.Board | 1 | (TKG4-11-VIDEO) | |
| TKGU-5S7-00 | CPU P.C.Board | 1 | (TKG4-11-CPU) |
| TKGU-08-00 | (PP-7A) Power P.C.Board | 1 | T |
| | No. | Name of Parts | \Q’ty | Remarks | roa |
| TKGU-18-01 | (PP-7B) Power P.C.Board | 1 | T |
TKGU-09-01-01 | (PT-8A) Power Transformer 1 TKGU-19-01-01 | (PT-821B) Power Transformer 1 TKGU-09-01-02 | 2P Table Tap 1
| TKGU-09-01-03 | Terminal Block | 1 | (Sexipolar) | |
| TKGU-19-01-03 | Terminal Block | 1 | (Quadrupolar) | |
| TKGU-10-01 | Power Switch Ass’y | 1 { | |
| TKGU-13-01 | 10P CLK Harness Connector | 1 | T |
| TKGU-13-02 | 2P Counter Harness Connector | 1 | |
| TKGU-13-03 | 9P CPU Harness Connector | 1 | T |
| TKGU-13-04 | 3P Coin Harness Connector | 1 | |
| TKGU-13-05 | SP Service Harness Connector | 1 | |
| TKGU-13-06 | 2P Speaker TV Harness Connector} | 1 | |
| TKGU-13.07 | 4P-750 Audio Harness Connector | 1 | T | |
| TKGU-13-10 | 9P Main Switch Harness | 1 |
Connector TKGU-13-11 17P Junction Harness Connector | 1 r
| TKGU-13-12 | 50P Flat Cable | 2)T |
| TKGU-13-17 | 2P Speaker Harness Connector | 1 |
| TKGU-13-28 | 3P Junction Harness Connector | 1 |
| TKGU-13-29 | 4P Main Switch Harness | 1 |
Connector TKGU-13-31 6P-1000 Video Harness Connector | 1
| TKGU-20-00 | Video Monitor | 1 | (20-5F) |
| TKGU-23-10 | Micro Switch | 3 | |
| TKGU-23-12 | Switch Button Bracket | 3 | |
| TKGU-23-13 | Control Switch | 4 | |T |
| TKGU-23-14 | Blind Plate | 1 | T |
| TKGU-23-16 | Bearing Bracket | 1 | T |
| TKGU-23-17 | Switch Spacer | 4 | T |
| TKGU-23-19 | Schaft | 1/T | |
| TKGU-23-20 | Spring Stopper | 1|T | —| |
| TKGU-23-21 | Switch Collar | 1 | T |
| TKGU-23-22 | Lever Spring | 1 | T |
| TKGU-23-23 | E Ring 4 | 1 | T |
| TKGU-23-26 | Nut Plate | 3 | |
| TKGU-23-29 | Controt Knob Collar | 1 | T |
| TKGU-23-31 | Switch Button Ass’y (Blue) | 2 | |
| TKGU-23-32 | Switch Button Ass’y (Orange) | 1 | |
| TKGU-23-34 | Pal Nut | 3 | —_ |
FOB Japan
| No. | Name of Parts | Q'ty] | Remarks | per pe. |
| TKGU-23-50 | 4 Way Control Lever Ass’y | 1 | T | |
| TKGU-23-51 | 4 Way Guide Plate | 1} | T |
- VIDEO P.C.Board ~T 7
| No. | Name of Parts | Q’ty | Remarks | ‘| om an |
| TKG-56-00 | VIDEO P.C.Board | 1 | Complete Set (TKG4-11-VIDEO) |
| laKe-5601 | IC SN74LS00 | 2 | Quadruple 2 - Input Positive NAND |
Gates
| TKG -56-02 | IC SN74LS02 | 3 | Quadruple 2 - Input Positive Nor |
Gates
| TKG-56-03 | IC SN74LS04 | 6 | Hex Inverters | T |
| TKG-56-04 | IC SN74LS08 | 1 | Quadruple 2 - Input AND Gate | |
| TKG-56-05 | IC SN74LS10 | 1 | | Tri3 Input NAND Gate | |
| TKG-56-06 | IC SN74LS20 | 4 | Dual 4 - Input Positive NAND Gate | ||
| TKG-56-07 | IC SN74LS30 | 1 | 8 - Input Positive NAND Gate | |
| TKG-56-08 | IC SN74LS32 | 1 | Quadruple 2 - Input Positive or Gate | |
| TKG-56-09 | IC SN74LS74 | 4 | Dual D-Type Edge-Triggered Flip- |
Flop w/Set and Reset
| TKG-56-10 | IC SN74LS86 | 7 | Quadruple 2 - Input Executive OR | 7 | | |
ate
| TKG-56-11 | IC SN74LS109 | 1 | Dual J-K Positive Edge-Triggered |
Flip-Flops with Preset and Clear
| TKG -56-12 | IC SN74LS 123 | 2 | Dual Retriggerable Single Shot |
| TKG -56-13 | IC SN74L8 139 | 1 | Dual 2- to 4-Line Decoder/Demulti - |
plexer
| TKG-56-14 | IC SN74LS157 | 14 | Quadruple 2-Line to 1-Line Data | |
| TKG-56-15 | IC SN74LS161 | 4 | Synchronous Presettable 4-Bit Binary |
Counter w/Direct Reset
| TKG-56-16 | IC SN74LS163 | 2 | 4Bit Binary Counter with Synchro- |
nous clear
| TKG-56-17 | IC SN74LS174 | 1 | Hex D-Type Flip-Flop w/Reset RAM |
| TKG-56-18 | IC SN74LS175 | 2 | Quadruple D-Type Flip-Flop w/Reset |
| TKG-56-19 | IC SN74LS245 | 2 | Octal 3-State Bus Transceivers |
| TKG-56-20 | IC SN74LS273 | 4 | Octal D-FFS | |
| TKG-56-21 | IC SN74LS283 | 8 | 4 Bit Binary Full Adder | |
| TKG-56-22 | IC SN74LS299 | 6 | 8 Bit Bidirectional Universal Shift/ |
| Storage i
| TKG-56-23 | IC SN74LS367 | 2 | Hex Bus Driver w/3 State Output | rT |
| TKG-56-24 | IC SN74LS373 | 2 | Octal 3-State D-Latches | |
| TKG-56-25 | IC SN74LS377 | 1 | | Octal D-Type Flip-Flops |
| TKG-56-26 | IC SN74S161 | 3 | Schotkey 4-Bit Binary Counter with |
Direct Clear
| TKG-56-27 | IC MB10105 | 1 | Triple 2-3-2- Input OR/NOR Gates |
| TKG-56-28 | IC MB10116 | 1 | Triple Line Receivers |
| TKG-56-29 | IC MB10124 | 4 | Quadruple TTL-to-ECL Translators |
| “TKG-56-30 | IC MB10125 | L 3 | Quadruple ECL-to-TTL Translators |
r
| No. | Name of Parts | Q’ty | Remarks | eased an |
| TKG-56-31 | IC MB10136 | 1 | Universal Hexadecimal Counter |
| TKG-56-32 | IC 2716 | 6 | 2048 x 8 BitEP-ROM | |
| TKG-56-33 | IC MB7074 | 2 | ECL-RAM (MBM10422) with |
Radiator Fin
| TKG-56-34 | IC MB93419 | 1 | 64 x 9 Bipolar RAM |
| TKG-56-35 | IC MB8114 | 2 | 1024 x 4-Bit Static MOS RAM | |
| TKG-56-36 | IC MB8148L55 | 2 | 1024 x 4-Bit Static RAM |
| TKG-56-37 | IC 24810 | 1 | 256 x 4-Bit Bipolar PROM |
| TKG-56-38 | Resistor Array | 4 | RNSA-O9P-551J 8-device 5102 |
| TKG-56-39 | Resistor Array | 1 | RNSA-O9P-102J 8-device 1kQ |
| TKG-56-40 | Variable Resistor | 2 | 50kQ 1/3W |
| TKG-56-41 | Resistor (Carbon) | 2 | 10kQ 1/4W +5% |
| TKG-56-42 | Resistor (Carbon) | 12 | 5102 1/4W +5% |
| TKG-56-43 | Resistor (Carbon) | 2 | 15kQ 1/4W +5% |
| TKG-56-44 | Resistor (Carbon) | 2 | 2.2kQ 1/4W +5% |
| TKG-56-45 | Resistor (Carbon) | 2 | 4.7kQ 1/4W 45% |
| TKG-56-46 | Resistor (Carbon) | 1 | 22k 1/4W +5% |
| TKG-56-47 | Resistor (Carbon) | 1 | 27kQ 1/4W +5% |
| TKG-56-48 | Resistor (Carbon) | 23 | 1kQ 1/4W +5% |
| | moses | | Electrolytic Capacitor | 2 | 220uF 16V |
| TKG-56-50 | Electrolytic Capacitor | 2 | luF SOV |
| TKG-56-51 | Ceramic Capacitor | 47pF S0V | |
| TKG-56-52 | Ceramic Capacitor | 128 | 0.01uF 50V |
| TKG-56-53 | Ceramic Capacitor | 1 | 33pF 50V |
| TKG-56-54 | Ceramic Capacitor | 2 | 10pF sov | |
| TKG-56-55 | Ceramic Capacitor | 1 | 220pF 50V |
| TKG-56-56 | Ceramic Capacitor | 1 | 68pF SOV |
| TKG -56-57 | Polyester Film Capacitor | 1 | 1000pF SOV (102kz) |
| TKG -56-58 | Polyester Film Capacitor | 1 | O.1uF 50V |
| TKG -56-59 | Polyester Film Capacitor | 1 | 0.022uF S0V |
| TKG -56-60 | Transistor | 2 | 2SC1215-R/S/T |
| TKG -56-61 | Crystal Oscillator | 1 | | 61.44MHz (HC-18U) |
3, CPU P.C.Board
| No. | Name of Parts | Q’ty | Remarks | roe japan |
| TKG-57-00 | CPU P.C.Board | 1 | Complete Set (TKG4-11-CPU) |
| TKG-57-01 | IC SN74LS00 | 2 | Quadruple 2 - Input Positive NAND |
Gates
| TKG-57-02 | IC SN74LS02 | 2 | Quadruple 2 - Input Positive NOR |
Gate
| TKG-57-03 | IC SN74LS04 | 5 | Hex Inverters |
| TKG-57-04 | IC SN74LS05 | 1 | Hex Inverter Open Collector |
| TKG -57-05 | IC SN74LS08 | 1 | Quadruple 2 - Input AND Gates |
| TKG -57-06 | IC SN74LS32 | 1 | Quadruple 2 - Input Positive OR |
Gate
| TKG -57-07 | IC SN74LS74 | 2 | Dual D-Type Edge-Triggered Flip- |
Flop w/Set and Reset
| TKG -57-08 | IC SN74LS75 | 2 | Quadruple Bistable Latch |
| TKG-57-09 | IC SN74LS86 | 1 | Quadruple 2 - Input Exclusive |
OR Gate
| TKG-57-10 | IC SN74LS123 | 1 | Dual Retriggerable Single Shot |
| TKG -57-11 | IC SN74LS125 | 1 | Quadruple 3 State Bus Buffers |
| TKG -57-12 | IC SN74LS 132 | 1 | Quadruple 2 - Input NAND Schmit |
Triggers
| TKG-57-13 | IC SN74LS 138 | 6 | 3- to 8-Line Decoder/Demultiplexer |
| TKG-57-14 | IC SN74LS139 | 1 | Dual 2- to 4-Line Decoder/Demulti- |
plexer
| TKG-57-15 | IC SN74LS161 | 1 | Synchronous Presettable 4-Bit |
Binary Counter w/Direct Reset
| TKG -57-16 | IC SN74LS164 | 3 | 8-Bit Serial-In Parallel-Out Shift |
Register
| TKG-57-17 | IC SN74LS174 | 2 | Hex D-Type Flip-Flop w/Reset RAM |
| TKG-57-18 | IC SN74LS175 | 1 | Quadruple D-Type Flip-Flop w/Reset |
| TKG-57-19 | IC SN74LS240 | 4 | Octal Buffer/Line Driver/Line Receiver |
w/3-State
| TKG-57-20 | IC SN74LS245 | 1 | Octal 3-State Bus Transceivers |
| TKG-57-21 | IC SN74LS259 | 2 | 8-Bit Addressable Latches |
| TKG -57-22 | IC SN74LS367 | 6 | Hex Bus Driver W/3 State Output |
| TKG-57-23 | IC SN74LS373 | 2 | Octal 3-State D-latches |
| TKG -57-24 | IC MB8114 | 6 | 1024 x 4-Bit Static MOS RAM |
| TKG-57-25 | IC 2532 | 4 | 4096 x 8-Bit EP ROM | |
| TKG-57-26 | IC Z80A | 1 | 8-Bit Microprocessor |
| TKG-57-27 | IC 24810 | 2 | Bipolar ROM 256 x 4-Bit | |
| TKG-57-28 | IC 8257-5 | 1 | DMA Controller |
| TKG -57-29 | IC 2716 | 2 | 2048 x 8-Bit EP ROM | |
| TKG-57-30 | IC MB8884 | 1 | 8-Bit Microprocessor |
\ a ]
Name of Parts Q’ty | Remarks | FOB Sep a
| TKG -57-31 | | IC MB3614 | 1 | Lower Power Quadruple Operational |
Amplifiers
| TKG -57-32 | IC NESS6 | 1 | Dual Timer |
| TKG -57-33 | IC DACO8CQ | 1 | 8-Bit Digital-to-Analog Converter | |
| TKG -57-34 | IC CD4049UB | 1 | Hex Buffer/Converter (Inverting) |
| TKG -57-35 | Transistor | 7 | 28C1815 | |
| TKG -57-36 | Transistor | 1 | 2SC1384-R |
| TKG -57-37 | Transistor | 4 | 28C828-P/Q | |
| TKG-57-38 | Transistor | 2 | 28A564-P/Q/R | |
| TKG-57-39 | Diode | 9 | ISSs3 | |
| TKG-57-40 | Diode | 4 | 18953 | |
| TKG-57-41 | Diode | 1 | WO03B | |
| TKG-57-42 | Dip Switch | 1 | B-8A |
| TKG-57-43 | Aluminium Electrolytic Capac- | 2 | 470uF 16V |
L itor
| TKG-57-44 | Electrolytic Capacitor | 1 | 220uF 25V |
| TKG-57-45 | Electrolytic Capacitor | 2 | 33uF 16V |
| TKG-57-46 | Electrolytic Capacitor | 6 | 1yF 50V |
| TKG-57-47 | Electrolytic Capacitor | 2 | 4.7pF 25V |
| TKG-57-48 | Electrolytic Capacitor | 4 | 3.3uF S0V |
| TKG-57-49 | Electrolytic Capacitor | 15 | 10uF 16V |
| TKG-57-50 | Electrolytic Capacitor | 2 | 100uF 16V |
| TKG-57-51 | Electrolytic Capacitor | 1 | 47uF 25V |
| TKG-57-53 | Ceramic Capacitor | 3 | 0.068uF 25V |
| TKG -57-54 | Ceramic Capacitor | 86 | 0.01uF SOV |
| TKG-57-55 | Ceramic Capacitor | 1 | 0.022uF 25V |
| TKG-57-56 | Ceramic Capacitor | 2 | 22pF 50V |
| TKG-57-57 | Ceramic Capacitor | 1 | 0.001pF 25V |
| TKG-57-58 | Ceramic Capacitor | 1 | O.luF 50V |
| TKG-57-59 | Polyester Film Capacitor | 2 | 0.047uF 50V |
| TKG-57-60 | Polyester Film Capacitor | 1 | 0.033uF 50V |
| TKG-57-61 | Tantalum Capacitor | 3 | 10uF 16V |
| TKG -57-62 | Variable Resistor | 1 | 10k2 1/5W (RVA0911V-306- |
—_t 7B103)
| | TKe -57-63 | Series Resistor Array | 3 | 1kQ. PNSA-09P-102J |
| TKG-57-64 | Parallel Resistor Array | 6 | 682 PNSB-08P-680J | |
| TKG-57-65 | Series Resistor Array | 1 | 4.7k2 PNSB-09P-4723 | |
| TKG-57-66 | Resistor (Carbon) | 6 | 47kQ 1/4W +5% | |
| TKG-57-67 | Resistor (Carbon) | 2 | 5.1kQ 1/4W 45% |
| | TKG -5 7-68 | Resistor (Carbon) | 3 | 2kQ 1/4W +5% |
| Name of Parts | Q’ty | Remarks | | aos a | ||
| TKG -57-69 | Resistor (Carbon) | 1 | 7502 1/4W +5% | |
| TKG -57-70 | Resistor (Carbon) | 8 | 4.7kQ 1/4W +5% | |
| TKG -57-71 | Resistor (Carbon) | 14 | 10kQ 1/4W +5% | |
| TKG -57-72 | Resistor (Carbon) | 3 | 100k2 1/4W +5% | |
| TKG -57-73 | Resistor (Carbon) | 2 | 43kQ 1/4W +5% | |
| TKG -57-74 | Resistor (Carbon) | 16 | 1kQ2 | 1/4W 5% |
| TKG -57-75 | Resistor (Carbon) | 5 | 5.6kQ 1/4W 45% | ||
| TKG -57-76 | Resistor (Carbon) | 1 | 1202 1/4W +5% . | |
| TKG -57-77 | Resistor (Carbon) | 2 | 1502 1/4W +5% | + |
| TKG -57-78 | Resistor (Carbon) | 1 | 18kQ 1/4W +5% | |
| TKG -57-79 | Resistor (Carbon) | 1 | 3.3MQ 1/4W +5% | |
| TKG -57-80 | Resistor (Carbon) | 2 | 27k2 1/4W +5% | ||
| TKG -57-81 | Resistor (Carbon) | 2 | 1.2kQ2 1/4W +5% | |
| TKG -57-82 | Resistor (Carbon) | 1 | 12kQ 1/4W +5% | |
| TKG -57-83 | Resistor (Carbon) | 1 | 4.3k2 1/4W +5% | |
| TKG -57-84 | Resistor (Carbon) | 5 | sen | 1/4W +5% | fo |
| TKG-57-85 | Resistor (Carbon) | 7 | 3302 1/4W +5% | |
| TKG -57-86 | Resistor (Carbon) | 2 | 33kQ 1/4W +5% | |
| TKG -57-87 | Resistor (Carbon) | 4 | 2202 1/4W +5% | ||
| TKG-57-88 | Resistor (Carbon) | 5 | 4702 1/4W +5% | |
| TKG-57-89 | Resistor (Carbon) | 1 | 6802 1/4W +5% | ||
| TKG -57-90 | Resistor (Carbon) | 3 | 1002 1/4W +5% | |
| TKG-57-91 | Resistor (Carbon) | 1 | 2002 1/4W +5% | |
| TKG -57-92 | Crystal Oscillator | 1_ | _HC-18U-182 (6.000MHz) |
—~19—
PRINTED IN JAPAN ©1981 Nintendo of America inc.