Joust Instruction Manual (16P-3006-101) Sept 1982
Joust (Green label) (Williams, 1982) · Instruction Manual · 11 pages · 19 sections · original scan
e e 16P-3006-101
INSTRUCTION MANUAL
FOR
UPRIGHT GAMES
including procedures for... ° operation ° auditing ¢ adjustment
¢ diagnostics
FOR SERVICE Di, ig
NOTE NEW TOLL-FREE
TELEPHONE NUMBERS: ee INC. 3401 N. ans rr 800-621-1253 Chic i Cable Addre: = WiLCOIN, —
TELEPHONE NUMBERS: ee INC IN ILLINOIS CALL: GL ) 267-2:
800-572-1324
ROM SUMMARY
| ROM | PART NO. | DESCRIPTION |
| JOUST 1A | A-5343-09961-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST 2A | A-5343-09962-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST 3A | A-5343-09963-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST 4A | A-5343-09964-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST SA | A-5343-09965-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST 6A | A-5343-09966-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST 7A | A-5343-09967-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST 8A | A-5343-09968-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST 9A | A-5343-09969-A | PROM, 4Kx8, YELLOW LABEL |
| JOUST 10A | A-5343-09970-A | PROM, 4Kx8, YELLOW LABEL |
JOUST 11A A-5343-09971-A | PROM, 4Kx8, YELLOW LABEL
| JOUST 12A | A-5343-09972-A | PROM, 4Kx8, YELLOW LABEL |
| Decoder ROM 4 | A-5342-09694 | PROM, 512x8 |
(Horizontal)
| Decoder ROM 6 | - A-5342-09821 | PROM, 512x8 |
(Vertical) Video Sound ROM 4 A-5343-09973 ROM, 4Kx8
Special Chip 1 A-5410-09911 Special Chip
POWER TURN-ON
WHEN THE GAME IS FIRST TURNED ON it produces a sound. Simultaneously general illumination should come on and a moment later a scanning “rug pattern” indicating the RAM test should appear on the screen. Next the tug should become stationary as the ROM test is performed. In a correctly-running game the rug pattern will be followed by the message “INITIAL CHECKS INDICATE ALL SYSTEMS GO”. If RAM or ROM failure messages come up on the screen instead, refer to Power-Up Tests in TROUBLESHOOTING PROCEDURES.
GAME OPERATION
GAME START ~ Insert coins; a random sound is produced and credits are displayed on the CRT. With two or more credits displayed, pressing 2-player start initiates a 2-player game where each player gets five *mounts (turns).
*adjustable feature
PLAYER CONTROLS
THE JOYSTICK sends the gladiator and his ever-stalwart mount (ostrich or stork) boldly to the left or to the right.
THE FLAP BUTTON causes the hero’s mount to spread its robust wings.
GAME PLAY
AT SOME FAR-DISTANT TIME two fantastic gladiators meet and square off for battle. Each is mounted on a fanciful bird of prey (ostrich or stork) whose wings can carry it from the clifftops to the mouth of the abyss and hopefully back ...or the bubbling lava below will increase its toll.
While your mount is a skilled flyer, your opponent is a shrewd gladiator. You must prove you are his better. Stealthily you must pilot your mount above him, and cleverly you must stalk him... to strike at the moment in which he least suspects you! And always remember this rule: In every joust, the highest lance wins.
Of course your opponent will resist your attempts, all the while pursuing his own designs against you. Each gladiator has five *mounts. Every time you’re toppled, you must mount a new bird for the next joust. The gladiator who scores the most dismounting is the winner.
YOUR PATH MAY SEEM CLEAR and your work cut out, but just then a flock of vicious Buzzard-Riders will ambush you! Ruthless even as they are dismounted, these wily Buzzard-Riders instantly lay their eggs. You must pick up the eggs or they will soon hatch into even more persistent and antagonistic foes!
Fortunately at 20,000* points (should you make the grade) you will be awarded another bird to mount against the loyal opposition.
Joust is designed for either one or two players.
HIGH SCORE SIGNATURE
Select letters with the joystick. Push right to move forward through the alphabet; push left to move backward. Then push the FLAP button to lock in the letter.
BOOKKEEPING AND EVALUATION TOTALS
- In Game-Over Mode, open the cashbox and depress the cashbox advance switch. The advance switch located on the coin door can also be used. (See Figure 1.) The CRT should indicate all bookkeeping and evaluation totals. If so, go to step 3. If the CRT display comes up in the ROM test, perform step 2.
O@O HIGH MANUAL- ADVANCE SCORE DOWN RESET
Figure 1. Coin Door Button Switches
- Continue to depress the cashbox advance switch, stepping the game through test programs for ROMs, RAMs, CMOS RAM, sounds, switches, color RAMs, and then CRT test patterns, of which there are five. The fifth test pattern, color bars, directly precedes the CRT display of the bookkeeping and evaluation totals.
- The bookkeeping and evaluation totals appear on the displays as in Figure 2.
- adjustable feature
CLEARING BOOKKEEPING TOTALS
- Depress ADVANCE to display Game Adjustments.
- Operate PLAYER 1 joystick to position cursor on CLEAR BOOKKEEPING TOTALS.
- Push PLAYER 2 joystick.
- Depress ADVANCE.
BOOKKEEPING T
LEFT SLOT COINS CENTER SLOT COINS RIGHT SLOT COINS PAID CREDITS FREE MEN TOTAL TIME IN MINUTES TOTAL MEN PLAYED TOTAL SINGLE PLAYER TOTAL DUAL PLAYER TOTAL CREDITS PLAYED AVERAGE TIME PER CREDIT
Figure 2. Bookkeeping Display
GAME ADJUSTMENTS
In the Game-Over Mode open the coin door. With the AUTO-UPIMANUAL-DOWN switch set to AUTO-UP, depress the coin door ADVANCE switch twice to cause a CRT display as shown in Figure 3.
Select the function you wish to change by moving the PLAYER | joystick (push right to move arrow down, left to move arrow up). Then, making sure the coin door is open, push the PLAYER 2 joystick right to increase or left to reduce the value of the selected function.
The number of turns (men) per 1-credit game can be set anywhere from 1 to 99 (5 recommended). Difficulty is fatory-programmed at 5 (moderate). It can be custom programed (0-9, with 9 conservative) as desired.
Game Pricing is selected with standard settings or with custom settings as shown in Tables 1 & 2. Table | lists some common pricing schemes and directs the reader to the proper entry in Table 2, which shows what the CRT display should look like to accomplish the desired pricing. Note that free play can be elected by entering the code number 9 at the PRICING SELECTION function (see Tables 1 and 2).
For standard settings you need change only the PRICING SELECTION. For custom settings, first set PRICING SELECTION to zero and then set the remaining values according to Table 2.
GAME ADJUSTMEN
EXTRA MAN EVERY 20000 MEN FOR 1 CREDIT GAME 5 HIGH SCORE TO DATE ALLOWED YES PRICING SELECTION 3 1/QUARTER 4/DOLLAR LEFT SLOT UNITS CENTER SLOT UNITS RIGHT SLOT UNITS UNITS REQUIRED FOR CREDIT UNITS REQUIRED FOR BONUS CREDIT MINIMUM UNITS FOR ANY CREDIT DIFFICULTY OF PLAY LETTERS FOR HIGHEST SCORE RESTORE FACTORY SETTINGS
HIGH SCORE TABLE RESET AUTO CYCLE SET ATTRACT MODE MESSAGE a o
NO CLEAR BOOKKEEPING TOTALS NO NO NO NO SET HIGHEST SCORE NAME NO
USE ‘PLAYER 1 MOVE’ TO SELECT ADJUSTMENT USE ‘PLAYER 2 MOVE’ TO CHANGE THE VALUE PRESS ADVANCE TO EXIT
Figure 3. Game Adjustments Highest Score Signature : The number of letters allowed the highest-scoring player for entering his name can be varied from 3 to 20 and is “ recommended as 3. If objectionable words are entered as the signature name, you can change the lettered entry leaving the highest score the same. See Setting Highest Score Name. Restore Factory Settings
- Position the cursor on RESTORE FACTORY SETTINGS.
- Push PLAYER 2 MOVE.
- Depress ADVANCE.
Resetting High Score Table
- Position the cursor on RESET HIGH SCORE TABLE.
- Push PLAYER 2 MOVE.
- Depress ADVANCE.
ents Attract Mode Message
Position the cursor on SET ATTRACT MODE MESSAGE. Push PLAYER 2 MOVE. Depress ADVANCE. Enter up to two lines of your message following instructions on the screen. Depress ADVANCE to terminate process. vane
Setting Highest Score Name
Position the cursor on SET HIGHEST SCORE NAME. Push PLAYER 2 MOVE. Depress ADVANCE. Enter new signature; depress ADVANCE to terminate process.
Table 1. Pricing Schemes
TABLE 2 COIN DOOR STANDARD SELECTION/
| MECHANISM | CREDITS/MONEY | CUSTOM KEY |
Twin Quarter W/25¢ S/$1 Quarter, Dollar, Quarter 2/50¢ 5/$1 1/25¢ 4/$1 2/50¢ 4/$1 VS0¢ 3/$1, 4/$1.25 1/50¢ 3/$1, 7/$2 1/S0¢ 3/$1, 6/$2 V/S0¢
IDM, SDM 1/1 DM, 6/5 DM
20-Cent, 50-Cent 1/20¢ 3/50¢
1 Franc, 5 Franc 1/2F, 3/5F only
25 Cent, W25¢ 4/1G
1 Guilder 1/25¢ 5/1G
| 5 Franc, | WSK, 2/10F | _| |
10 Franc I/10F
1 Franc, 2 Franc 21K, 5/2F
100 Lire, 200 Lire 1/200 Lire
Twin Coin 1/1 Coin 1/2 Coins 1/3 Coins, 2/5 Coins
1 Unit, 5 Unit 1/2, 3/5 MV, S/S 1/3, 2/5
FREE PLAY Oa A! TUwWlol Nlol/yl/Qlalalnm|/w/uH-mouavwwpy
Table 2. Pricing Settings
DISPLAY FUNCTIONS STANDARD SELECTION CUSTOM KEY
A|B/|C/D/E/F|G/H/1I| J
Pricing Selection 1)2/3/4]5]/6/7]/8]/9/}o0}/0;0}0/0/0;0;0/0]0
| Left Slot units | L)6} | 2} | 1; | Lj) | LP | Py | ap | bya) | i} | dy | 3 ji2; 6; | ar) | 2; | rf | 2 |
Center Slot units 4}0| 4/16) 4/0/0/0]4) 4/4 )4/12)48)0]/0]0]0]0
| Right Slot units | LT} | i} | ry | 6]; | ry | 4s 2) 2]; | rf) | ry | d} | ty | 3yt2jis} 4) 2) 5]10 | ||
| Units per credit | 2/1F | 1) | 2); 2; | 0; | 0) 2]; | 0) | tyr | pis | 4} i4} sy | ry | sf | iy | s |
Units required for bonus credit | 4]0|0|0/0/0/01/0/0]4/)4)0|15/96)0)4]0/0]0 Minimum units for any credit | 0|0/0/0/0/0/0/0]0]0]2)2]0]|24/0|0|0]0}0
Certain types of game malfunctions may inhibit the game's diagnostic or display faculties. Troubleshooting procedures for most of these types of malfunctions as well as malfunctions that permit self- TROUBLESHOOTING PROCEDURES
diagnosis are covered below, Our troubleshooting algorithm begins
POWER-UP TESTS with Power-Up and continues until Game Over Mode. Alll procedures can be performed with minimal test equipment or merely by observing the game itself.
NO GENERAL ILLUMINATION NO INITIAL VIDEO (RUG PATTERN)
- Check fuse F2 on power supply board.
- Check for proper installation of jumpers WI, W2, W3 and/or resistor R27. (Some machines MAY NOT have an R27. Refer to your drawing set.)
- Check 4P1/J1, 4P3/J3, 6P2/J2 and 6P3/13.
(4) [fall the above don’t turn up the problem,
check power supply board.
- Open back doors. CHECKING POWER SUPPLY BOARD
- Swap power supply board with one from known-good game.
- If game plays, problem is on power supply board.
- If game doesn’t play, check power transformer with voltmeter.
- If known-good power supply is unavailable for tests above, check +5V, -5V and +12V outputs on power supply in game. Each MUST BE within 2% of rated output with less than 0.1% AC hum.
- Press reset button on CPU Board.
- Try RAM and ROM tests (see below),
check power supply board.
MORE POWER-UP TESTS
TEST ROM BOARD
LEDS RECOGNIZE CONDITION
GENERAL “0” means all power-up tests passed
“0” means tests passed CMOS (See Appendix A)
“0” means tests Passed
BATTERY (See Appendix A) “0” means tests passed
MEMORY “Q” means tests PROTECT _| passed INTERLOCK (See Appendix A)
SPECIAL “0” means tests — CHIP passed ROM BOARD VIDEO LEDS IDENTIFY BAD CHIPS REMEDY
- scanning rug pattern
- stationary rug pattern
- “INITIAL TESTS INDICATE: OPERATIONAL”
- Game-Over Mode
“HIGH SCORE TABLE RESET” “BOOKKEEPING TOTALS CLEARED” “ADJUSTMENT FAILURE” “RESTORE FACTORY SETTINGS BY OPENING FRONT DOOR AND. TURNING GAME OFF AND ON”
“FACTORY SETTINGS RESTORED” If any video (see left) is missing or error message is displayed, proceed to Diagnostic Mode tests.
- Open coin door and turn power off and on.
- Press ADVANCE. Game should return to Game-Over Mode.
“HIGH SCORE TABLE RESET” “BOOKKEEPING TOTALS CLEARED” “ADJUSTMENT FAILURE” “RESTORE FACTORY SETTINGS BY OPENING FRONT DOOR AND TURNING GAME OFF AND ON”
- Open coin door and turn power off and on. Or: press ADVANCE. In either case, game should return to Game-Over Mode.
- Check AA alkaline cells on CPU Board.
- If problem persists, proceed with CMOS RAM test by putting the game into its Diagnostic Mode (see SELF-DIAGNOSTICS).
- Making and breaking coin door interlock switch, check with VOM and replace if faulty.
- Replace if faulty: Memory protect gates 6E, ICI, Ql, or CMOS RAM IC. “HIGH SCORE TABLE RESET” “BOOKKEEPING TOTALS CLEARED” “ADJUSTMENT FAILURE” “RESTORE FACTORY SETTINGS BY OPENING FRONT DOOR AND TURNING GAME OFF AND ON”
- scanning rug pattern
- blank screen instead of “INITIAL ‘TESTS INDICATE: OPERATIONAL”
- high score table with no scores
- intro blank or program crash
- Turn power off.
- To find bad chip, replace 2 special chips one at a time with known good chips.
- Turn machine on after each replacement and run through Power-Up Tests.
+5VDC ADJUSTMENT (R10 & R24) Before adjusting the voltage output, always check at the output of the supply for AC hum. This hum should never rise above .005V on the +5VDC supply. If it does, consult your schematic drawing set for proper DC voltages throughout the circuit. Test for these with the DC setting of your multimeter. Make a second check using the AC setting. Pay particular attention to readings at TPS (top of capacitor C10). If the voltage here is low (less than + 11 VDC) or if you find excessive ripple (more than 700mVrms), replace the capacitor.
Table 3. Voltage Adjustments to +5VDC Power Supply WHICH RESISTORS SUPPLY 1
| HAS... | neither | R10 only | R24 only | R24 & RIO |
| TO INCREASE VOLTAGE IF | temove R10 | remove R10 | ||
| UNDER 4.75 VDC... | add R24 | = | ||
| TO DECREASE VOLTAGE IF | remove R24 | remove R24 or | ||
| OVER 5.25VDC... | add R10 | _ | or add RIO | add R10 |
SELF-DIAGNOSTICS If RAM or ROM failure messages are displayed on the CRT after the “rug pattern,” proceed with self-diagnostics. Self-diagnostic procedures are controlled by the AUTO-UP/MANUAL-DOWN and ADVANCE switches on the coin door. (See Figure 1.) Set the AUTO-UP/MANUAL-DOWN switch to the MANUAL-DOWN position and depress the ADVANCE pushbutton. The game is now in its Diagnostic Mode and a ROM test is performed. With ROM test results present on the CRT display, depressing the ADVANCE pushbutton initiates the RAM test. Further tests (CMOS, sound, switch, color RAM, monitor test patterns) are encountered one after the other as the ADVANCE pushbutton is depressed (once more for each subsequent test). MONITOR TEST PATTERNS - For ease in monitor adjustments, the monitor may be slid back and the screen viewed in the CRT mirror provided on the inside-top of the cabinet. Remove the two bolts and carefully slide the monitor back in its shelf; secure the monitor in the extended position by inserting the two bolts through holes in the monitor base and monitor shelf provided at the left side of the monitor. AUTO CYCLE MODE - From the color bar pattern (or Game Over with the switch set to AUTO-UP) depress ADVANCE two times to display GAME ADJUSTMENTS.
- Position the cursor on AUTO CYCLE with the PLAYER | MOVE joystick and push the PLAYER 2 MOVE joystick,
- Depress ADVANCE.
- The system will now sequence through ROM, RAM, and CMOS RAM tests repeatedly, The coin door must be open during the Auto Cycle test. If an error is detected, the test is terminated and the failure indication is displayed on the CRT. :
- To terminate the Auto-Cycle test, turn the game OFF and ON.
105. INTERFACE INTERBOARD CONNECTOR ETRE |E] ETE
2R
| 3k] | [3c] | j3m] | 3N | y| | 3R | ||
| = | 3} | [32] | |33] | [34 | 36 | 38 |
| 1 | 2 | 3 | 4 | 5 | 6 | 8 |
Figure 4. RAM Location and Numbering on CPU Board
ROM BOARD LEDS RECOGNIZE CONDITION ow | “2” means ROM error “I” means RAM error
CMOS (see appendix A) “3” means CMOS RAM error TROUBLESHOOTING PROCEDURES RAM AND ROM TESTS
ROM BOARD LEDS IDENTIFY BAD CHIPS
2. no.
Bank no. first... then chip no. in bank (see figure 3) REMEDY
“ROM ERROR” and ROM chip no.
“RAM ERROR?” followed by RAM bank no, and chip no. (Note: with multiple RAM failures this display may not appear)
“CMOS RAM ERROR OR WRITE PROTECT FAILURE” () Turn power off.
- Replace suspected chip.
- Check for these normal voltages on indicated RAM chip: -S/pin 1, + 12/pin 8, +5ipin 9.
- Turn power off.
- Replace suspected chip.
- With multiple RAM failures always check power supply. See POWER-UP TESTS.
- With power off, check pin 22 of CMOS RAM for 3.2VDC minimum. If present, replace CMOS chip IC. If absent, replace AA alkaline cells.
- With new alkaline cells and power off, check for 3.2V minimum at pin
- If still absent, replace diodes D9 and D10.
- Upon power-up and reentry into diagnostics if CMOS error message persists, check CMOS RAM memory protect and address decoding circuits with a logic probe.
Tests 4 and 7 provide sequential subtests. To stop automatic cycling set switch to MANUAL-DOWN. Depress ADVANCE in MANUAL-DOWN to step through subtests. LED indications are not made for these tests.
TEST & PROCEDURES
SOUND (Test 4)
SWITCH (Test 5)
(I) Set switch to MANUAL-DOWN and clear any stuck switches.
- CRT should indicate no switches closed.
- Operate switches and check for display of switch name. “SOUND LINE 1” “SOUND LINE 2” “SOUND LINE 3” “SOUND LINE 4” “SOUND LINE 5” “SOUND LINE 6” (These appear one at a time.)
CRT indicates AUTO-UP closed and any stuck switches. CRT Display for Each Switch...
Coin Door Player Panel
ADVANCE AUTO-UP 1-PLAYER START 2-PLAYER START HIGH SCORE RESET MOVE | LEFT COIN (next to hinge) CENTER COIN RIGHT COIN SLAM SWITCH FLAP 1 MOVE 2 FLAP 2 REMEDY OR ADJUSTMENT
MISSING CHECK 1 2P4/10P3 pin 3 2P4/10P3 pin 2 2P4/10P3 pin 5 2P4/10P3 pin 4 2P4/10P3 pin 7 2P4/10P3 pin 6 form Sound Board iagnostics (see below)
- COIN DOOR SWITCH STUCK: Disconnect 2P3.
- PLAYER PANEL SWITCH STUCK: Disconnect 3P2 or 3P3.
- COIN DOOR SWITCH DOES NOT OPERATE: Ground corresponding pin of 2P3.
- PLAYER PANEL SWITCH DOES NOT OPERATE: Ground corresponding pin of 3P2 or 3P3. (J SYMPTOM REMAINS SAME ... ROM Board or Interface Board faulty. (SYMPTOM CLEARS UP .. Problem is in switches or wiring.
MORE DIAGNOSTIC MODE TESTS
COLOR RAM REPLACE RAM IB | REPLACE RAM 2B
| est 6) | 1 light red | too-light | ta band | |||
| : | ig | screen | oo-light | or | magenta | ban |
| Note that a blank sequence or two sequences with the | 2 red screen | too-dark red |
same shade indicate a faulty 1A flip-flop, IB RAM or 2B
| RAM or a failure in the color analog circuit. Check | 3 dark red screen | or gray band |
| voltages on Ql] (green transistor), Q2 (red transistor) and | 4 light green screen | yellow band | cyan band |
Q3 (blue transistor). During the eight full-screen color 5 green screen tests, the base voltage (center pin) on each transistor 6 dark green screen should vary between 3.8V (brightest color) and 4.4V (no
| color). | 7 light blue screen | magenta band | too-light or too |
8 blue screen -dark blue or Color RAM Check gray band
| (1) CRT sequences through 8 | 4 light green screen | green band | dark green band |
colors, 2 Seconds Each. or gray band
- Thick vertical band
| indicates color | RAM fault, | 5 green screen | light green | dark green band |
band or gray band 6 dark green screen | — gray band MONITOR Aids you in setting up
| & COLOR | cross hatch pattern | vertical and horizontal |
RAM l linearity, convergence, (Test 7) focus.
red screen Aids you in optimizing green screen color purity. blue screen color pattern Zr«an
color bars If color RAM test 6 + double-width indicates no faults,
- half-width symptoms at left suggest a
Color Bar Pattern + transposed fault in 1A, 1B, 2B or 2C
- missing chips.
SOUND BOARD DIAGNOSTICS Depress the DIAGNOSTIC pushbutton on the bottom of the Sound Board. A check is made of the sound ROM and sounds are produced if the check is good. If sounds are produced but not in Audio Test 4 check for ROM Board PIA output on Sound Board inputs that are stuck low. If no sound is produced either the sound ROM, IC12, input power, or other Sound Board circuitry is faulty.
CMOS RAM Data Test Protocol
The first sub-test of the CMOS RAM data is that of the ATTRACT MODE MESSAGE checksum. If the test does not pass, the factory ATTRACT MODE MESSAGE is restored. Next, the game adjustments are checked and restored to factory settings if an error is found. If game adjustments are found intact, the high score table is checked for any bad entries. Bad entries are replaced with a score of 4,000 points and no initials. If all entries check, the game returns to the Game Over Mode.
If game adjustments are restored to factory settings, the AUDIT TOTALS are checked. If 5 or more audit digits are other than 0-9 (that is hexadecimal A through F) all audit totals are cleared. This is followed by a check of the high score table and the table is reset to factory settings if errors are found. Finally, game adjustments are rechecked and either OPEN COIN DOOR or FACTORY SETTINGS RESTORED is displayed. With the former, open the coin door and turn the game OFF and ON and then FAC- TORY SETTINGS RESTORED will be displayed. Return to game over by depressing the ADVANCE pushbutton or by turning the game OFF and ON a second time. ATTRACT MODE MESSAGE?
RESTORE Factory MESSAGE
came Pass ADJUSTMENTS
RESTORE FACTORY SETTINGS,
RESET HIGH SCORE TABLE TO FACTORY SETTINGS
‘OPEN COIN DOOR DISPLAYED
OPEN COIN DOOR POWER OFF AND ON HIGH SCORE ENTRIES
BAD ENTRIES. REPLACED WITH 4,000 AND NC INITIALS
"INTIAL TESTS INDICATE ALL ‘SYSTEMS GO” DISPLAYED
“FACTORY SETTINGS RESTORED” DISPLAYED
POWER OFF AND ON,
“Warning: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. As temporarily permitted by regulation it has not been tested for compliance pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.” a8