Rad Mobile Upright Type Owners Manual (420-55976-02)
Rad Mobile (World) (Sega, 1990) · Owner's Manual · 43 pages · 13 sections · original scan
OWNER’ Ss R'S MANUAL
Owner's Manual
SEGA ENTERPRISES, INC.
TABLE OF CONTENTS
INTRODUCTION OF THE OWNER'S MANUAL... ... cece reece cece eect ence 1
HANDLING PRECAUTIONS 20... eee eee cere ee eee e ee rere eee eee tnees 1
PREVENTION OF COUNTERFEITING AND CONVERSION .........e-eeeeeee 2
PRECAUTIONS CONCERNING THE PLACE OF INSTALLATION ............. 3
NAME OF PARTS 2... cece cece cece eee teen eee e eee e ee ee eenee seeee 4
STEERING HANDLE VR ADJUSTMENTS 1... ... cece cece cece e teen teene 5
REMOVING THE ACCELERATOR / BRAKE UNIT ......-. cee eeeesereeece 6
ADJUSTING THE VR wo... cece cece cc cee cere cece teen ete n teen ee teee 6
MONITOR ADJUSTMENTS 1.0... . eee e sce cece cee eee teen erence eeenee 7
SERVICE SWITCHES 0... ccc eee cece cece reece cree e ee ee te teteeece 8
TEST MODE 2... cece e cece cee ce cee tee ete e eee ete te eect tneeee 9
IC BOARD .o cee crc ccc cece ect en cence rect re cet eerssteeeaee seeeee 20
ROM LOCATIONS Deemer e een a eee e seer eee ertene me eee ter eee eres 21
PARTS LIST ..... sevens Pee eae ee etree wee eee eeeeees 22
WIRING DIAGRAM ...... eee ene eeee Pee e mace ra renee eeeeerene 40
ADJUSTMENT INSTRUCTIONS ........+ eeeneee ecw c eee ee ees entee 41
- SPECIFICATIONS *
- INSTALLATION SPACE : 900mm(35.4")(D) x. 630mm(25.2")(W)
- HEIGHT : 1890mm(74.4")
- POWER : 140 Watt
- C.R.T. : 19 INCH .
WEIGHT 3 120Kg(266.7 lbs)
INTRODUCTION OF THE OWNER'S MANUAL
SEGA ENTERPRISES, LTD., supported by its high electronic technology of LSIs, microprocessors, etc. and a wealth of experience, has for more than 30 years been supplying various innovative and popular game machines to the world market. This ONNER'S manual is intended to provide detailed comments together with all the necessary information covering the operation in general of electronic assemblies, electromechanicals servicing control, spare parts, etc. as regards the RAD MOBILE U/R a new SEGA product. The manual is intended for those who have knowledge of electricity and technical expertise especially in ICs, CRTs, microprocessors, etc. Carefully read so as to acquire sufficient knowledge before working on the machine. Should there be a malfunction, non-technical personnel should under no circumstance touch the interior system.
HANDLING PRECAUTIONS
When installing or inspecting, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely.
© Be sure to turn the power off before working on the machine. © To insert or pull out the plug quickly is dangerous. Oo It is necessary to make sure that the power cord or the grounding wire is not exposed on the road, etc. in a manner so as to be dangerous. Make sure that grounding connections are made safely at the position where so Specified. © Do not use any fuse that does not meet the specified rating. oO Make complete connections for the IC board and other connecters. Insufficient insertion is very dangerous.
- Also, for the IC board circuit inspections, only the logic tone is allowed. The use of a tester iS not permitted, so be careful in this regard. After confirming that there are no irregularities, turn the power ON.
PREVENTION OF COUNTERFEITING AND CONVERSION
LABELLING
To prevent counterfeits and conversions, the following labels are put on all the SEGA products. When handling such goods, be sure to confirm the labels. They are used to prevent illegal acts such as the unauthorized copying of the products and the printed circuit boards thereof or carrying on business by manufacturing similar merchandise or by converting, selling or using such products or printed circuit boards.
ORIGINAL SEAL LICENSE SEAL
The following seal is put on The following seal is put on the the machines manufactured by kits, such as the printed circuit SEGA. boards, of SEGA products
A teeta eee resi Gilman pace Om AUD FEY ORIGINAL SEAL)
a. ppobanenewannen eer
COPYRIGHT NOTICE
This SEGA product has the copyright notice as follows
© SEGA 1991
This signifies that this work was disclosed in 1991 and is the property of SEGA ENTERPRISES, LTD.
PRECAUTIONS CONCERNING THE PLACE OF INSTALLATION
The RAD MOBILE U/R is an indoor game machine. Absolutely do not install it outside. Even indoors, avoid installing in places mentioned below so as to ensure proper uSage:
Places subject to rain or water leakage, or condensation due to humidity. In the proximity of an indoor swimming pool and/or shower. Places subject to direct sunlight. Places subject to heat sources from heating units, etc., or hot air. Vicinity of highly inflammable/volatile chemicals or hazardous matter. Sloped surfaces. Vicinity of anti-disaster facilities such us fire exits and fire extinguishers. Places subject to any type of violent impact. Dusty places.
| AC120V AC220V | AC240V RATED CURRENT | 2A 1A | 1A |
NAME OF PARTS
PART NO, DESCRIPTION
DESIGN PLATE RAD MOBILE U/R
422-0365 PLAY INSTR SH RAD MOBILE U/R 421-7828 STICKER RAD MOBILE U/R L STICKER RAD MOBILE U/R R 421-7827
421-7829 STICKER RAD MOBILE U/R S RDM-2101Y-C | CONTROL PANEL SHEET RDM-2101-D | STICKER CONT PANEL 422-0373-01 SUBPLAY INST STICKER RDM ENG NEW
STEERING HANDLE VR ADJUSTMENTS
YR adjustments will be made in the TEST MODE's INPUT TEST screen. |
SCREW
VR BRACKET /
Loosen the 2 SCREWS (M4 x8) of the VR BRACKET turn GEAR, and make sure that the on-screen numerical value becomes approximately 80H. When loosening the screws, adjust the gear backlash.
Minimum Maximun Reference Values value. + value (Lower than 30H) +—— | 7FH 80H 81H | —- (Higher than DOH)
Allowable Adjustment Range
REMOVING THE ACCELERATOR / BRAKE UNIT AND ADJUSTING THE VR .
To remove the accelerator/brake unit, take off the 7 MS TAMPERPROOF SCREKS. -
BRAKE PEDAL
TAMPERPROOF SCREW (M5)
ACCELERATOR/BRAKE UNIT
POR-2600-01 ACCELERATOR PEDAL
BRAKE GEAR
601-5410 ACCELERATOR GEAR
601-5410 BRAKE POTENTIOMETER
220-5130 ADJUSTMEN’ SCKEW B T
ACCELERATOR POTENTIONETER
Adjusting the Accelerator/Brake Make adjustments of the Accelerator/Brake by using the following procedure: ~Perform the V.R. numerical adjustments in the test mode's INPUT TEST screen.
@ Loosen SCREW A of VR BRACKET, turn GEAR A and make sure that the on-screen numerical value becomes approximately 20H. When fastening the screw, adjust the gear becklash. @ Then, loosen SCREW B, turn GEAR B and make tine adjustments to anes Reference value
ACCELERATOR 1 (OVER H)
BRAKE (OVER H) Allowable adjustment range
GREEN ORIVE
BLU CUT OFF MORIZ SIZE GREEN CUT OFF RED ORIVE
HORIZ RASTER POSITION
Ps 1P4 1P3 KV SHUT “S oown
ND > ~V.SYNC FOCUS -HSYNC SCREEN ¢ .
monae yieee +H. SYNC HORIZ HOLD fn So +¥. SYNC VERT RASTER POS 6NO VERT SIZE Ss.
VERT HOLD
BRIGHTNESS CONTRAST 2
BLUE BLUE DRIVE CUT OFF GRN ORIVE GREEN: CUT OFF HORIZ RASTER
POSITION
¥ +H, SYNC HORIZ HOLD S eo +V. SYNC VERT RASTER POS: GND:
VERT SIZE VERT HOLD
BRIGHTNESS, CONTRAST 2
MONITOR ADJUSTMENTS
SERVICE SWITCHES
Qpen the COIN CHUTE DOOR, and the following SERVICE SWITCHES' layout will appear:
@ VOLUME ADJUSTMENT
@ SERVICE SWITCH
@®_ TEST SWITCH
@ _ DEMAGNETIZING SWITCH NOT USED @® DEMAGNETIZING SWITCH
@ TEST SWITCH
@ SERVICE SWITCH
\ @ VOLUME ADJUSTMENT
Used for adjusting the volume of the speaker. Used for the purpose of servicing and increasing the credits without registering on the meter (this allows you to check the game). For the operation of this switch, see SELF-TEST. Not Used
° TEST MODE
This test mainly checks the operation of game PCB's, discovers defects if any, and also checks monitor colors and audio quality. In addition, the test indicates Coin mode and has a Bookkeeping function.
Selection of test ITEMS ~
- Push the TEST SK to cause the following TEST ITEM MENU to
appear :
Test mode
Individual
Bookkeeping Game & system setting Coin assignment Input test Output test Motor test Memory test Backup RAM clear > Exit
Select by SERVICE and push TEST
- By pushing the SERVICE SW, bring the arrow mark “>” to the desired item and press the TEST button.
- When the test has been completed, bring “>” to EXIT and push the TEST button.
Bring “>” to “INDIVIDUAL” and push the TEST button to change it to “CONTINUE.” : Bringing “>” to “CONTINUE” and pushing the TEST button without pressing the SERVICE button will change the screen sequentially.
1 Bookkeeping
Credit Report pagel/2-
| Coin chute #2 | 54 | } ® |
#2 0
| Coin credits | 54 | —@® |
| Service credits | 6 | —@® |
| Total credits | 60 | —@ |
Push TEST to return menu Push SERVICE to other page
@ Usage frequency of each COIN @ Usage frequency of each CHUTE SERVICE SW.
@ Total COIN CHUTE usage @ Total credits frequency
Press the SERVICE SW button to display the following :
Timer Report page2/2
Total time 8h 36m 0s Total play time Sh 30m 445 Average play time Oh lm 46s Longest play time on
Game Report
Now games 42 Continue games 58 Total play games
Push TEST to return menu Push SERVICE to other page
@® Machine's total energized time
Game&system setting
Game difficulty adjustment and the cabinet type are displayed.
Game mode >Game diffculty
@ Game difficulty
Normally, 8
@ Play times setting Normally, 45 sec.
@ Advertise sound
Normally,;on
@ Type of Screen mode
Normally, Normal
® Type of Cabinet Normally, Upright
Press the START button, bring the “>"to the item for which you desire to make a change, and then
change the numerical value by using either the WIPER SW. or the LIGHT SW.
ll
Game mode Page 2/2
Rival car speed
Slow gym TTITITT] Fast
Police car speed
Slow pEMAATIITITD Fast
® Rival car speed Normally, 8
@ Police car speed Normally, 8
Press the START button, bring the “>"to the item for which you desire to make a change, and then
change the numerical value by using either the WIPER SW. or the LIGHT SW.
Coin assignment
Shows the number of credit(s) to start, and number of credit(s) to CONTINUE.
Coin mode Page 1/2
> Credit to start 2 credit (continue 1 credit) Coin / Credit Setting lL coin 1 credit _A Chute #1 1 coin 1 credit Chute #2 1 coin 1 credit
Select by START and change WIPER (+) and LIGHT (-) button Push TEST to return menu Push SERVICE to other page
Number of credit(s) to start
Refers to the number of credits CONTINUE.
Twenty seven kinds of standerd coin modes can be selected. ©® © 86 @
Displays the COIN modes for COIN CHUTE#1 and #2
By pressing the START button, select the desired item, and the numeral can be increased or decreased by using either the WIPER SW, or the LIGHT SW.
Press the SERVICE button, and the following screen will appear {this is applicable in cases other than standard COIN modes).
e 8 *@
© Coin mode : age 2/2 Coin to credit ‘ coin 1 credit
Bonus Adéer | (No bonus adder) Coin chute#! Multiplier Bed 1 Coin counts as_1 coin coin 123456789 credit 12345678
Coin chute#2 Multiplier Bod 1 Coin cou coin 123 credit
Select by START and change WIPER (+) and LIGHT (-) button Push TEST to return menu Push SERVICE to other page
% Increase and decrease in numerals
The number of coins required for one credit.
Lets you choose from various kinds of bonuses or no bonus.
The number of coins each counts as in the coin chute#1.
The number of coins each counts as in the coin chute#2.
Input test
Indicates the condition of each switch and POTENTIOMETER.
INPUT TEST
Service Start Coinl Coin2 PSW1 PSW2 Wiper Light Test 1 2 3 4 Dip SW OFF OFF OFF OFF
Handfe 80
Left Center Right Brake 26 Accele 26 > oe | > tow High Low High
Push TEST to return menu
@ Indicates the condition of each switch. Operate each switch. When the “OFF” condition is changed to “ON,” the corresponding switch is in good working order.
@ It is satisfactory if data values increase (higher than 30)when the steering wheel is moved to the right, decrease(lower than 30) (HAPP TYPE) when it is moved to the left,and indicate"80H" when released ,
<— HANDLE > 7CH 7DH 7EH 7FH [ 80H | 81H 82H 83H 84H Standard value
@ If the data value increases when pressure is applied to the accelerator's or brake's pedal, it tests out satisfactorily.
<— Accelerator << Brake
24 25 26 27H (28il 241 25 26 271 (28i Low 28H—C8H High Low 28H——BOH High
5 ‘Output test
- C. R. T. TEST @® Monitor adjustment check
Checks the C. R. T. position Make sure that the on-screen
corners are consistent and
then make size adjustments.
@ RGB color check
OUTPUT TEST Page2/4 CRT color test Q
RED
WHITE
Push TEST to return menu Push SERVICE to other page
The color becomes brighter from the left to the right.
@ Brightness check
Becomes brighter from the left (black) to the right (white).
- SOUND TEST
OUTPUT TEST
SOUND TEST
ly Page3/4
Select WIPER (+) and LIGHT (-) Push START to listen music Push TEST to return menu Push SERVICE to other page
Pushing WIPER SW. increases the number and pushing LIGHT SW decreases the number
Push the START SW. when the desired number is shown.
- LAMP TEST
OUTPUT TEST Page 4/4
Lamp check
START LIGHT WIPER
Push TEST to return menu Push SERVICE to other page
The LIGHT, WIPER and START LAMP will flash.
6 Memory test
Check the PCB's MEMORY ICs.
When the IC is in good operating condition, “GOOD” will be
indicated.
If there exists any malfunctioning of the IC's, “BAD” will be indicated.
MEMORY TEST
RON TEST
Good coop =I¢
RAM TEST
G00D GooD GOOD Goo as eo
$
Baa0GcGa5G
Push TEST to return menu
7 Backup RAM clear
The BOOKKEEPING data can be cleared. When clearing, bring “>” to “YES” and when not clearing, to “NO,” by using the SERVICE SW, and then push the TEST button.
BACKUP RAM CLEAR
YES (Clear)
> NO (Cancel)
Select by SERVICE and push TEST
IC BOARD
833 - 7738 - ~ GAME BD RAD MOBILE ~
USA VERSION | 837-7428 = MAIN BD -7738-01 oie tte < 834-7739-01 ROM BD
[o) =
ROM LOCATIONS
SY 32 ROM BD
1 OK 1C 38
RAD MOBILE +— — IC LOCATION ROM NUMBER MAIN WORK
| 1] ic 1 | MPR-13511 | a |
| 2 Ic 5 | MPR-13512 | 8M |
| 3/ IC 10 | MPR-13513 | aut |
| 4} Ic 16 | MPR-13514 | BM} OBJECT |
| s| Ic 2 | MPR-13515 | ai |
| 6] ic 6 | MPR-13516 | 8 |
| 7} Ie a | MPR-13517 | 8M |
| 8 Ic 1 | MPR-13518 | 8M |
| gi ic 3 | MPR-13519 | 2M |
| 10) IC 7 | MPR-13520 | 2M | SCROLL |
| Wf 1c 12 | MPR-13521 | 2M |
| 12 {C 18 | MPR-13522 | 2M |
| 13] Ic 9 | EPR-13527 | MM |
| yp oie M4 | EPR-13523 | 44} SOUND |
| 15} IC 20 | EPR-13699 | 4M |
16] IC 37 EPR-13691 EPR-13694 | 44 MAIN 17| IC 38 EPR-13692 EPR-13695 | 4M | PROGRAM 1g} IC 21 EPR-13690 | Epr-13693 | 1M
| BOARD | USA ROM BD | | |
PART NO. | 834-7739-01
*Rom Numbers subject to change without notice
2.
PARTS LIST TOP ASSY RAD MOBILE U/R USA (RDM-00001) = (D-1/3)
TOP ASSY RAD MOBILE U/R USA (RDM-00001)
ITEM NO. PART NO. DESCRIPTION
RDM—10001 ASSY CABINET U/R (D-2/3)
RDM-—0120 ASSY SHIELD CASE U/R RDM-20001 ASSY CONTROL PANEL 4 | RDM-40001-| ASSY PWR SPLY U/R GS 422-0365 PLAY INSTR SH RAD MOBILE U/R 833-7738-01 GAME BD RAD MOBILE USA
| 7 | SGM-3640 | POLYETHYLENE COVER HN UPRIGHT |
421-5800-142 | ORIGINAL SEAL RAD MOBILE 422-0373-01 SUBPLAY INST STICKER RDM ENG. NEW ADJUST INSTR SH RAD MOBILE U/R 421-7835-01
421-6120 STICKER SEGA USA 999-0047. - | FCC PLATE ~ 421-6594 STICKER SERIAL NO INFO 117-5123 NAME PLATE ELEC SPEC USA
____t 009-0816 TMP PRF SCR BH M816 M SCR PH W/S M5x30
FLT WSHR 5.5-20x1.6
| “204 | 046-0001 | SCR NAIL THH STNLS 15x16 |
| 205, | 039-0099 | CRG BLT BLK M6x25 |
__| ee ee
| 206 | 051-0006 | FLG NUT M6 |
063-0002 FLG WSHR 6,.5-19x1.2
TOP ASSY RAD MOBILE U/R USA (RDOM-00001) (D-3/3)
PART NO. DESCRIPTION ~NOTE 601-6604—320 CARTON BOX 30 420-5976-02 OWNERS MANUAL RAD MOBILE U/R ENG | ITEM NO,
SCHEMATIC DIAGRAM SEGA RAD MOBILE U/R EXPORT ,
| 404 | 540-0006-01 | WRENCH FOR TAMP PRF SCR DUAL TYPE M4 | |
| 405 | $40-0007-01 | WRENCH FOR TAMP PRF SCR DUAL TYPE M5 | |
| 406 | 540-0008-01 | WRENCH FOR TAMP PRF SCR DUAL TYPE M8 | | |
| 407 | 220-5130 | VOL CONT B-5K OHM |
—__1+—_
| 408 | POW-2615 | EXT SPRING | |
| 409 | 280-5139 | RUBBER GROMMET | | |
+—
ASSY CABINET U/R (RDM~10001) (D-1/4)
ASSY CABINET U/R (RDM~—10001) (D-2/2)
ITEM NO.} PART NO, DESCRIPTION NOTE 1 | RDM-1500 | ASSY SUB CABINET U/R = > | it
| 2 | | RDM-1053 | BILLBOARD HOLDER UPPER | => |
| 3 | |RDM-1056 =| Sw UNIT | roa | | |
| 4 | |RDM-1052 | | WINDOW GLass | al |
i
| s | [Rpm-t0s7 | | ac CORD UNIT | | cS |
Ss
| 6 | RDM-1051 | MASK BOARD | Cl |
AB-0023 BRACKET, TV TV MASK ©. 20
| 9 | |KR-te07x | | CASH BOX | iG |
| 10 | 105-0064 | BRACKET MAIN SWITCH | F] | |
| ul | jRAqto16 | METER BRACKET | oS |
;—
| 12 | 200-5090 | ASSY CLR DSPL 20 TYPE |
280-5112 BUSH FOR TV —+— ee
| 14 | | 280-5113 | COLLAR FOR TV | (2 |
15, | 509-0049 SWITCH STOPPER 124
-——+ ——}
| 18 | 421-6526 | STICKER ON OFF | ol |
| ig | 421-6709 | STICKER SERVICE INSTR ENG |
20 | 421-7308-02 | DENOMINATION SHEET 1 GAME 2x25¢
| a | 421-6671 | STICKER, DANGER HIGH VOLTAGE | ||
| _ | 22 | | RDM-1054 | | siuLBoaRD HOLDER LOWER | an |
| J
| 23 | | 423-0156 | DESIGN PLATE RAD MOBILE U/R | ead |
| 24 | POW -2600-01 | ASSY ACCEL & BRAKE BLACK TYPE | 2 FF |
25 | POW~1623x_—_| ASSY ACCEL PEDAL
ASSY CABINET U/R (ROM—10001)
ITEM NO.| PART NO. DESCRIPTION
220-5064 MAG CNTR 6DIG DC5V W/L & D10 509-5234 SW TOGGLE 390-5108-03 ASSY FL LIGHT 15W
029-0172 M SCR PH BLK M4x16 LL 202 M SCR PH W/S M4x8
| 203 | 031-0425-B | | CRG BLT BLK M4x25 |
| 204 | 051-0004 | | FLG NUT M4 |
205 ~ | 000-0510-S M SCR PH W/S M5x10 i eee nee
| 206 | 005-3513 | W SCR RH 3.5x13 |
| 207 | 000-0408-FS | M SCR PH W/FS M4x8 |
| 208 | 000-0530-S | M SCR PH W/S M5x30 |
| 208 | 069-0001 | FLT WSHR 5.5-20x1.6 |
| 210 | 031-0530 | CRG BLT M5x30 |
| 211 | 010-0406-F | S-TITE SCR PH W/F M4x6 |
005-3113-F W SCR RH W/F 3,1x13
006-3110 W SCR FH 3.1x10 FLG NUT M5
008-0520 TMP PRF.SCR TH M5x20 069-0024 FLT WSHR BLK M4
600-6012-01 WIRE HARN +5V
ASSY CABINET U/R (RDM—10001)
ITEM NO.| PART NO. DESCRIPTION (D-4/4)
_ NOTE
302 600-6012-02
600-8012—03 WIRE HARN MAIN
WIRE HARN SOUND
304 600-6012-04 WIRE HARN VR.
305 600-6012-06
306 600-6012-07 WIRE HARN SHLD MAIN
WIRE HARN SHILD VR.
SGB-4073~-2
SGB-4073-3 ‘| WIRE HARN SOUND VK EXT. | wine HARN MAIN SW
SGB-4073-4
312 | SGB-4073-5 WIRE HARN FL
WIRE HARN MONITOR
314 _|ScB-4073-12 313 |SGB-A073-6 Ee Pn WIRE HARN COIN METER
WIRE HARN EARTH =
(D-1/4) ASSY SUB CABINET U/R (RDM-1500)
ASSY SUB CABINET U/R (RDM~1500) (D-2/4)
ITEM NO.| PART NO. DESCRIPTION NOTE-
| 1 | |RDM-1501 | | WOODEN CABINET | =) | |
| 2 | |RDM-1502 | | BACK DOOR | |
| 3 | | RDM~1503 | FLOOR MAT | Sa) |
| 4 | | RDM-1504 | SUPPORT BRACKET | aA |
| 5 | RDM~1505 | MOUNTING BRACKET | Co |
6 | GUN~1507 GUARD PLATE
| [a | [ax-a0 | PROTECTOR A | GP |
| 8 | | Ti-1079 | LEG ADJUSTER BRACKET | Bs) |
=, 1
| 9 | | rA-t065x | NUT PLATE | @ |
10 | Pow-1604x =| TV MOUNTING BRACKET LEFT ae
| 11 | | POW-1605X_ | TV MOUNTING BRACKET RIGHT | A |
| 12 | | POW-1610 | RUBBER SPACER |
DP-1148X LKG TNG
220-5046-91 .220-5128-01 220-5253 ct iG
| 14 | |DP-ner =| TNG LKG | ) | |
| 15 | | HN-1050 | SPACER RING | O |
| 16 | KR-1608 | LOCK BRACKET | gy? | |
| 17} | 105-s106 | CASH BOX COVER | i) |
| 18, | 105-5107 | CHUTE | ia | |
| 109-0045 | KEY HOLDER | g | |
| 29 | 117-0062 | PLATE LOCK RETAINER | ep | |
| 21 | 117-5098 | TNG RETAINER PLATE | | a |
| 2 | | KR-1611 | PLATE | Ee |
pom
MAGNETIC LOCK W/KEYS ASSY COIN CHUTE 2DOOR USA 25¢ MAGNETIC Lock MASTER W/O KEY
> 30
ASSY SUB CABINET U/R (RDM-1500) (D-3/4)
ITEM NO.| PART NO. DESCRIPTION
| rod | | 220-5254 | KEY MASTER FOR 220-5253 |
| 105 | | 601-0453 _ | LEG ADJUSTER |
106 | 601-0291 CASTER
| 107 | | 130-5018 | SPEAKER 82 10W |
201 M SCR PH M5x50 202 FLT WSHR M5 203 CRG BLT BLK M6x30
| 204 | 050-0006 | HEX NUT M6 |
| 205 | 060-0006 | FLT WSHR M6 |
| 206 | 081-0006 | SPR WSHR M6 |
| 207 | 030-0630 | HEX BLT M6x30 |
000-0525-FS | M SCR PH W/FS M5x25 M SCR PH W/FS M4x8
M SCR PH W/S M4x6
000-0306-F
SCR NAIL THH STNLS 1.5x16
005-3110 W SCR RH 3.1x10 M SCR PH W/F Max6 : 005-3113-F | W SCR RH W/F 3.1x13 .
215 oo-044-FS_ | M SCRPH Weg M4x14
| 216 | 059-0007 | HEX NUT 3/8-16 |
a |
| 217 | 008-0416 | TMP PRF SCR TH M4x16 |
L_ a
| 218 | 000—0525-S | M SCR PH W/S M5x25 |
| 219 | |.069~0001 | FLT WSHR 5.5-20x1.6 |
220 «| oo0-0s16-FS | M SCR PH W/FS M5x16
ar -
ASSY SUB CABINET U/R (RDM—1500) (D-4/4)
ITEM NO.| PART NO. DESCRIPTION NOTE. |} 221 ] 016-0003 SCR NAIL THH STNLS 1.5x20
;———— 301 SGB-4073-7 WIRE HARN SP 302 | §GB-4073-8 - | ‘WIRE HARN COIN SW.
a — =e ] a I
|— +— ne —
a t
'
sw UNIT (RDM-1056) (D-1/2)
SW UNIT (RDM-1056) _ (D-2/2)
ITEM NO, PART NO. DESCRIPTION NOTE~
| 1 | KR-1060 | SW BRACKET |
| 2 | 421-6481 | STICKER SW |
| 101 | 220-5179 | VOL CONT B-SK OHM |
a
| 102 | 601-0042 | | know | . |
| 103 | 509-5028 | SW PB 1M |
- {oo
| 301 | SGB-4073-9 | WIRE HARN SW UNIT |
TT —
—P
—__|_____}
SEE B (P28 BE ASSY CONTROL PANEL (RDM~-20001) (D-1/2)
ASSY CONTROL PANEL (ROM—20001) (D-2/2)
ITEM NO. | PART NO. DESCRIPTION NOTE
| 1 | | RpM-2o1y | CONTROL PANEL | (Sz | |
| 2 | apc-i013 | | SASH 598 BLACK | | | — | |
| | RDN-2102 | HINGE L=ie0
| [- 4 | [RpM-203 | | HOLDER PLATE | freee |
101 610-0267 ASSY STEERING UNIT
| 102 | 509-5218 | PUSH BUTTON SWITCH 7T YELLOW W/LAMP |
103 509-5372
104 508-5373 PUSH BUTTON SWITCH 1T GREEN W/LAMP
PUSH BUTTON SWITCH 1T BLUE W/LAMP ns re oe
| \ | 201 | 039-0095 | CRG BLT BLK M6x15 |
_ TT
| 202 | 051-0006 | FLG NUT M6 |
jo |
| 203 | 039-0081 | CRG BLT CRM Mé6x20 |
re
| 204 | 090-0012 | SCREW LOCK (THREE BOND 140/C-200g RED) | _| |
| 205 | 090-0013 | GREASE |
301 SGB-4073-11 _ | WIRE HARN START SW 302 | SGB-4073-10 | WIRE HARN HANDLE
ASSY STEERING UNIT (610-0267) (HAPP CONTROLS)
PART NO.
1 | 123-50 DESCRIPTION
SPRING HOLDER SHAFT (HAPP CONTROLS 30-8365-00) 601~ 6697 125-5095 CAM (HAPP CONTROLS 50-8366-00)
EXT SPRING (HAPP CONTROLS 50-8143-00)
3-SPOKE (HAPP CONTROLS 50-8125-00) 4 109- S020
ae ee 101 220-5361 VOL CONT 5K OHM (HAPP CONTROLS 50-8056-00) t +
ASSY PWR SPLY U/R (AC120V) (RDM-—40001) (D-1/2)
ASSY PWR SPLY U/R (AC120V) (RDM—40001)
ITEM NO.| PART NO.
| 1 | RDM-4010 | WOODEN BASE |
DESCRIPTION
2 560-5141
3 421-7427 PWR XFMR 90-240V 18.5V5A 100V1.5A
STICKER FUSE INSTR
| 4 | 421-6690-01 | STICKER 120V |
7-5172
| 101 | 400-5080 | SW REGU AC90-240V +5V7A 12V1.5A |
| 102 | 601~6227-01 | PWR AMP W/SW REGU 12V54 |
| 1038 | 514-5029-02 | FUSE HOLDER 2P W/COVER |
| 104 | | 270-5020 | NOISE FILTER AC250V 6A |
| 105 | 117-5167 | TERMINAL 5P-2Px2 SHORT |
TERMINAL PLATE 3P
HARNESS LUG
FUSE 34 514-5036-3_ CORD CLAMP #15
PLASTIC TIE BELT 8mm
514-5036-4 FUSE 4A
M SCR PH W/FS M4x14
301 600-6012-05,
303 -SGB-4073-1
| 202 | 005-3113-F | W SCR RH W/F 3.1x13 |
| 203 | 005-3516 | W SCR RH 3.5x16 |
| 204 | 029-0173 | W SCR RH 2,7x25 |
| 205 | 006-3110 | W SCR FH 3.1x10 |
a ee WIRE HARN PWR AMP a WIRE HARN PWR SPLY
$e
nN = b uw L _ ul ul 1 — : WHITE ..-9
O
OL ASSY ACCELABRAKE I, ox } amc a a K Gn AE Bh
| rowzsne MAIN
ea
FL_15W
288-5830
‘CLOR a Se
{
acteev’
rews EX e A SaeO72
Post
wit
ANE i
s
TOR eT RIGHT
=
air i
RED ———+ GREEND————. ~“ i
signi aise!
al x ae
i \
A slp
recta ec '
aL
i
i
_s ra Test_sw_.D | | EB E
SGB—4073-9 tj = =
i QB-4Q73-12 ‘WIRE MARN EARTH i
#21 coin _ [a METER’ i) Sa
ts ole Teer SGB-4073-7 SOB-4873-5 cs
ere 45M
' 601-6227-01 HR AMP W/SW REWU 12V5A ac 3 PRY xO i
C
2; Tsgensece } SF ret ee paITE 30K = 30%4 3eKp §38x sox = sexs SBKp 558x7 rs
i J
SB-4073-3 Cc
38.
58: (39+ (ser
SQ) $3
irs3
|_18 r ar art rar Serr Fr} sit pum: jem WHITE f rime iat ai iit
WHITE ¢. ae Zo RED wt
Boi a Be cae Gav AAGEAEC Git MARRY enAI GR is Pasian PRReeE eR ieee
SGB-4873-15 an oe i
see-sarzat
ee 4127 MARS COIN & 5)
3a !
91 S00-8012-25
pit oie al Ei
a]
600-5212-04 600-601 2-02. . . cou ae oO
L S08-3909-05
aay COIN COoR (TERM LUG) Rl 600-581 2-36-31
EFIVAET Ur tai cia cw
E EGET ebb Gb es ansunal DANN NAW>+UOO
7 se oN
DM-0128 ASSY
(TERM LUS) COCR BASE jo 71 10 8| los
600-621 2-021 ‘JST 16P 837-7536 ma EGE SEP
A/D BD SYSTEM 18, 32 i
SHIELD CASE 837-7738-—~ Il BS5-7729-—~ GAME BD RAD MOBILE J
- pater ene RGA BO RAD MOBILE aaa 7
{_SOINB2 a ifn
415,
COIN ENTRY LAP
Th lat E aloljapilsitsjo spoareenck
RAD MCBILE 4+12V GND’
SQB-4873-13 WIRE HARN COIN SW MARS S
U/R
T Fete
Ei OCOD YON janeve 4334
a 1
TEND CONNECTOR) 4
MARS COIN pete t
narad is) GUATTRC BD
: E i i a E at INTERFACE CABLE TO MARS Dp 22 fusrsaepmatp z Eapryem aly
- ft qe ania at ERREEPES ian) ee ee PP aS n ae res ig oe caf z teaphent . a SUE’ [eet _
a T un —T - T ul _ 7 71eV
QO x ome QUARS COIN DOOR)
T E 122y
EXPORT |1939-1
G 743) EREEP: Ww T =
RAD MOBILE U/R
ADJUSTMENT INSTRUCTION
MANUFACTURER S RECOMMENDED SETTINGS.
GAME&SYSTEM SETTING
Game mode Game Difficulty 8 Setting time 60 sec.
Advertise sound on Screen mode Normal Cabinet type Upright
CO1N ASSIGNMENT Coin mode Page 1/2 Credit to start 2 credit (continue 1 credit)
Coin / Credit Setting 1 coin lcredit-A
Coin mode Page 2/2
Coin.:to credit 1 coin lcredit
Bonus Adder (No bonus. adder) chute#1 multiplier 1 Goin counts as 1 coin Coin
Coin chute#2 multiplier 1 Coin counts as 1 coin
PROCEDURE
- Press the TEST button to enter Test mode.
- Press the SERVICE button and bring the “>” to Game&System Setting.
- Press the TEST button to enter Game mode.
- Press the START button and bring the “>" to Game Diffculty.
- By using either the WIPER button or LIGHT button change the content of the
Game Diffculty.
- Press the TEST button and Lhen SERVICE button to bring the “>” to Exit
- Press the TEST button to have the GAME MODE return onto the screen from the Test mode. STANDARD COIN MODES
COIN/CRLDIT SETTING cute #1 cule 42 T COIN TCREDIT -A | 1 COIN 1 CREDIT | 1 COIN on APTS TEUBT | TEN 2 Biel i | = | 1 CoN 1 CROIE | 1 COIN 3 cRIDIIS “B ] 1 Com 1 CRONE | 1 COIN X cRiDIT cE | 1 COM 1 Chott | 1 COIN § cRiDIIS T COIN 2 CREDIIS -A | 1 COIN 2 CRIDIIS | 1 COIN 2 cREDIIS | =B] 1 CoM 2 CRLDIIS | 1 COIN 5 CREDITS 1 COIN 3 CREDITS 1 coin 3-CREDITS | 1.COIN 3 cRLDITS | 1 COIN 4 CREDITS T COIN A CREDIIS | 1 COIN A CREDITS 1 COIN 5 CRLDITS 1 COIN 5 CRLDIIS | 1 COIN 5 CRIDIIS
| 1 COIN 6 CRCDIIS | 1 COIN G CREDITS | 1 COIN 6 CREDITS | PROCEDURE |
2 COINS CREDIT -A | 2 COINS JcRrOIY | 2 COINS 1 cRrON -B | 2 cons 1 cRroll | TCO 4 CRON . =¢ | 2 coins 1 CRLOIE | 1:COIN 2 Crtolls 2 COINS 3CREDITS -A | 1 COIN 1 CREDIT. | 1 COIN 1 CRIDI
| > CONS 3 creo | 2 COINS 3 ERLDITS | 2 COINS 3 CRIDIIS | 1) Press the TEST button |
eons -B | COW. TowpL | 1 coin” 3 cHeDIIS to enter Test mode.
| 3 COINS 1 CREDIT | 3 COINS 1 CREDIT | 3 COINS 1 CREDIT | 2) Press the SERVICE putt | |
| 4-COIKS 1 CREDIT | 4 COINS 1 CREDIT | 4 COINS 1 CREDIT | and bring the *>* | ueren |
‘4 COINS § CREDITS -A | 1 COIN 1 CREDIT. | 1 COIN 1 CREDIT ; 2 COINS 2 CREDIs | 2 COINS 2 CAtDIIs te Coli assignment,
| A Gone S cups | 4eone Scubig | | 3) Press | the | TEST |
s <3 | icon. TcReDIT | 1 COIN 5 CREDITS er mutton 2 COINS 2 CREDITS to enter Coin mode. 5 COINS 3 CREDIIS
| .GETaF | wae 5 CREDITS | 4) Press the START button |
11S SOOINS J CREDIT | 3 COINS 4 CREDIT , 5 COINS 2 CREDITS | 5 COINS 2 CREDIIS and bring the ">" 5 COINS 3 CREDITS -A | 2 COINS 1 CREDIT. | 2 COINS 1 CREDIT to Coin/Credit Setting. <8] 2 COINS 1 CREDIT. | 7 COIN” 2 CREDITS y using either the | ONS SERED _ change th
| S COINS 6 CREDITS -A | 1 COIN 1 cntoll | 1coIN tcRiDII | Lei | © content of the |
2OOINS 2 CREDITS | 2 COINS 2 CREDIIS Coin/Credit Setting.
2 coins 2 cons 1 then SERVICE button 4 Goins 4 criDtls to bring the ">" to Exit S COINS 6 CREDIIS | 7) Press the TEST
| 5 COINS 12 CREDITS | 1 COIN. 2 CREDITS | 1 COIN 6 CREDIIS | t | button |
2 COINS 4 CREDITS 2 COINS 12 CREDITS o have the GAME MODE
4 COINS 9 CREDITS return onto the screen 5 COINS 12 CRLDIIS from the Test mode FREE PLAY TREE PLAY TREE PLAY ,
41 421-7835-01