Cyberball 2072 TM-341 1st Printing Tournament Vs Dual System Kit
Cyberball (rev 4) (Atari Games, 1988) · Kit Manual · 72 pages · 34 sections · original scan
TM-341 Ist printing
§ OUNNAMEN
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
VS. DualSystem Upright Kit Installation Instructions
(for use only with Nintendo VS. DualSystem upright cabinets)
VS. DualSystem is a registered trademark of Nintendo of America, Inc. This kit is designed and manufactured by Atari Games Corporation. It is not designed, manufactured, sponsored or endorsed by Nintendo.
Copyright © 1989 by Atari Games Corporation. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher. The game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the U.S. Copyright Act of 1976. This Act provides for substantial penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles, In addition, the Act provides for payment of statutory damages of up to $50,000 per infringing transaction in certain cases. Infringers may also have to pay costs and attorneys’ fees and face an imprisonment of up to five years as well as fines of up to $250,000 in the case of individuals and up to $500,000 in the case of corporations. Atari Games Corporation will aggressively enforce its copyrights against infringers. We will use all legal means to immediately halt any manufacture, distribution, or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.
Published by: Atari Games Corporation Toumament Cyberball 2072 VS. Kit
Notice Regarding Non-Atari® Parts
You may void the game warranty (printed on the inside back cover of this manual) if you do any of the following: © Substitute non-Atari parts in the game. © Modify or alter any circuits in the game by using kits or parts not supplied by Atari Games Corporation.
675 Sycamore Drive ¢ The power cord is properly plugged into a ground- P.O. Box 361110 Milpitas, California 95035
Printed in the U.S.A 10/89
Produced by the Atari Games Technical Publications Department. Editing and Text Layout: Andrea Dencker Illustration and Design: Mary Ohanessian Sumner ed three-wire outlet.
- On games provided with an Electromagnetic Interference (EMI) ground cage, be sure that the game printed-circuit boards (PCBs) are properly installed on the EMI ground cage and that the end board is securely installed with alll screws in place and tightened. If you are still unable to solve the interference problem, please contact Customer Service at Atari Games Corporation. See the inside front cover of this manual for service in your area,
Tournament Cyberball 2072 VS. Kit
Table of Contents
1 Set-Up How to Use This Manual Equipment Requirements. Tools Required... Preparing the Existing Game for Conversion. Inspecting the Kit Installing the Kit P. Testing After Power-Up. Setting the Coin and Game Options Game Play.....
2 Self-Test RAM, ROM, and Communications Tests. Switch Test Coin Options Game Options Statistics Screens Histogram Screen Playfield Scrolling Test Motion Object Test... Alphanumerics Test.. Color Test...... Color Purity Test Convergence Test Sound Test... 3 Troubleshooting See the List of Tables that follows 4 Illustrated Parts Lists See the List of Illustrations that follows
5 Schematic Diagrams See the List of Illustrations that follows
Statistics Sheet
Warranty List of Illustrations
Figure 1-1 Figure 2-1
Figure 2-2 Figure 2-3 Figure 2-4 Figure 2-5 Figure 2-6 Figure 2-7 Figure 2-8 Figure 2-9 Figure 2-10 Figure 2-11 Figure 2-12 Figure 2-13 Figure 2-14 Figure 4-1
Figure 4-2
Figure 4-3
Figure 5-1 Figure 5-2
Figure 5-3 thru Figure 5-14 Figure 5-15
Figure 5-16
Figure 5-17 thru Figure 5-19 Installing the Conversion Kit Parts........1-4 RAM or Communications Error Message ROM Error Message Switch Test Screen Coin Options Screen Game Options Screen. First Statistics Screen Second Statistics Scree! Playfield Scrolling Test. Motion Object Tes: Alphanumeric Te: Color Test... Color Purity Tes Convergence Test. Sound Test... Tournament Cyberball Assembly... oa Tournament Cyberball 2072 Game PCB Assembly... SAC (Sampled Audio Cruncher) PCB Assembly Faulty RAM/ROM Tables Hitron 5V, 13A Switching Power Supply and Audio Power Transformer
Tournament Cyberball 2072 Game PCB Assembly Schematic, Page 1 to
Tournament Cyberl Memory Map..... Tournament Cyberball 2072 Main Wiring Diagram... SAC PCB Assembly Schematic Diagram, Page 1 to 3
List of Tables
Table 1-1
Table 1-2 Table 2-1 Table 2-2 Table 2-3 Table 2-4 Table 2-5 Table 2-6
Table 3-1 Table 3-2
Table 3-3 Equipment Requirements for the Tournament Cyberball 2072 Kit.......... Kit Contents .. RAM Error Locations ROM Error Locations Coin Option Settings Game Option Settings .. Regions... Faulty Sound RAM and ROM Locations ..... Troubleshooting Table Voltage Inputs and Test the PCBs...... What ROM Problems Look Like 2-2 2-2 2-3 2-4 2-4
2-4 2-4
iti
Tournament Cyberball 2072 VS. Kit
Safety Summary
The following safety precautions apply to all game operators and service personnel. Specific warnings and cautions will be found in this manual whenever they apply.
J 5 4 ee 0
How to Use This Manual
This manual provides information for installing, testing, and troubleshooting the Tournament Cyberball® 2072 VS. DualSystem kit. The manual is divided into the following chapters: m= Chapter 1 describes the installation procedure and the Tournament Cyberball 2072 game play. = Chapter 2 contains self-test procedures. = Chapter 3 contains maintenance procedures. = Chapter 4 contains the kit parts list and PCB assembly drawings. = Chapter 5 contains the schematics for the game PCB and audio PCB.
Equipment Requirements
See Table 1-1 for the equipment required in the cabinet in which you are installing the Tournament Cyberball® 2072 kit.
Tools Required
a =Two C-clamps m= Drill with 1/4 inch drill bit, a 1 3/16-inch hole cutter (or 1 3/16-inch chassis punch), and a 1 3/4-inch hole cutter
VS. DualSystem is a registered trademark of Nintendo of America, Inc. Table 1-1 Equipment Requirements for the Tournament Cyberball 2072 Kit
Phillips screwdriver Flat-blade screwdriver Socket set Wire cutters and strippers Straightedge Squeegee X-ACTO™ knife
Preparing the Existing Game
for Conversion
- Turn off power to the game.
- Remove the ground strap from EMI cage.
Installation
- Using a Phillips-head screwdriver, remove the EMI card cage and discard the old screws. Opening the tight coin door will allow easier access to some screws, 4, Remove the game harness.
- Remove all the control panel decals, labels, and controls.
- Remove any side decals from the cabinet. If your cabinet has wood grain or laminate sides, remove the old graphics and adhesive. If the sides are damaged, repair them before putting on the new decals.
- Remove the video display tinted glass cover, display bezel, attraction shield, and marquee, if any.
- Paint the cabinet, if required.
- Wipe down and vacuum the cabinet as necessary.
Inspecting the Kit
Check to see that you have all the parts listed in the kit contents list in Table 1-2. If any part is missing or damaged, please contact your distributor with the Tournament Cyberball 2072 kit serial number, part number and description of the part, and date you received the kit.
Installing the Kit Parts
Product ID and FCC Label Place the product ID label (part no. 038158-01) and FCC label (part no. 039450-01) on the back of the cabinet..
Installing the Game Board and PCB Cleat
1, Insert the game board in the PCB cieat and position both on the cabinet floor snug against the side of the cabinet. Mark the place with a pen or chalk. Remove the game board and replace the PCB cleat on the cabinet floor, lining it up with the marks you made.
- Using a Phillips-head screwdriver, screw the PCB cleat to the cabinet bottom with the two #8, 1-1/2" black screws.
1-2 ‘Tournament Cyberball 2072 VS. Kit
- Place the game board in the cleat and center the board on the cabinet wall.
- Using two nylon washers behind the game board and two screws, attach the game board to the cabinet wall.
Installing the Power Supply Assembly
- Position the power supply assembly on the cabinet floor. Using three screws, secure the power supply assembly to the cabinet floor.
Table 1-2 Kit Contents
Tournament Cyberball 2072 VS. Kit
- With a fourth screw, attach the grounding strap from the EMI cage to the power supply assembly.
- Plug the six-wire harness into the connectors on the game board.
- Plug the three-wire harness into the existing power distribution box.
Installing the SAC (Sampled Audio Cruncher) Board
- Grasp the SAC board with the heat sink in the lower left-hand corner. Align the front edge of the SAC board with the front edge of the game board. Screw the SAC board to the cabinet wall using four silver screws and four nylon washers between the board and the cabinet wall.
Installing the Coin Counter
- Position the coin counter (CC1) on the existing righthand coin box. Close the door to make sure the coin counter fits properly. Screw the coin counter to the coin box. You can install just one screw and bend the coin counter forward for easier viewing if you wish. Connect the wiring harness connector to the game board at the connector labeled CC1.
Installing the Wiring Harnesses
- Plug the 12-volt power harness (part no. A047430-01) into the connector marked AC/DC on the SAC board. Three pins will remain unused.
- Insert a screw into the screw-down loop and secure the loop to the upper left corner of the cabinet wall.
- Connect the JS COM connector on the Com/Aud harness (part no. A047434-01) to the SAC board and the audio connector to the game board. 14, Locate the screw-down on the main harness (part no. A047425-01). It will be on the twisted pair of brown and white speaker wire. Screw the screw-down as close as possible to the top left corner above the SAC board.
- Plug the coin connector into the SAC board.
- Plug the AC/DC connector into the remaining three pins marked AC/DC on the SAC board.
- Plug the speaker connector into the SAC board.
- Plug each of the four player connectors into the game board.
- Route the wiring harness across the side of the cabinet underneath the bottom edge of the SAC board and screw the harness down at the bottom right corner of the SAC board. Route the main harness up and around the top right side of the SAC board and secure the harness to the cabinet wall at the top right corner of the SAC board. Route the harness across the shelf, and plug in the coin door connectors. Installation
- Bring the twisted pairs of speaker wires on the main harness up to the monitor shelf, and secure the main harness wires under the tie-downs. Disconnect the speakers from the monitors, The game does not use the monitor sound. Connect the connector with the orange and white wires to the right speaker. Connect the connector with the brown and white wires to the left speaker. . Locate the video harness (part no. A047433-01). Connect the connector with the striped wires to the connector labeled VIDEO 2 on the game board. Connect the connector with the solid-color wires to VIDEO 1 on the game board. Route the video harness and secure it to the center tie-downs on the rear monitor shelf. Connect the connector with the solid-colored wires to the left monitor and the connector with the striped wires to the right monitor.
- Remove the ground straps from both monitor chassis by loosening the screws on the inside of the cabinet. Secure the loose ground straps so as not to cause shorts or damage.
Installing the Control Panels
- Remove both panel assemblies from the cabinet by unlatching them from inside the cabinet cavity. Disconnect the control harnesses from the main harness.
- Completely remove all items on the control panels, but leave the control harnesses intact.
- Remove the decals from the panels. You may need to use a solvent such as rubber cement thinner or acetone to remove excess adhesive. Considerable effort is necessary to completely ciean and smooth the panel surfaces.
- Be sure the panels are free of all grease, dirt or adhesive prior to applying the new decals. Otherwise, the new decals will not adhere well. Remove the backing paper from each decal and apply one decal to each panel surface.
- Remove the backing paper from one side of the control panel plex cover.
- Place the uncovered surface over the decal.
- Attach the two button assemblies through all parts in order to clamp the pieces together. Use the C-clamps to hold the edges.
- Using a 5/16" drill bit, drill four holes in the metal control panel cover, using the holes in the plex cover as a guide. Remove any plastic or metal flakes under the cover.
1-3
Installation
u g
© & 2
e G :
res a:
U
wu Gi ] Gi:
é
g
Z
L
'
OG
G
Steps 23 to 44 are not shown in this drawing.
Figure 1-1 Installing the Conversion Kit Parts Tournament Cyberball 2072 VS. Kit
Tournament Cyberball 2072 VS. Kit
- Connect the grey and black wires to the left player button and the green and black wires to the right player button.
- Remove the paper from the top of the control panel plex cover. Use Loc-tite or an equivalent to secure the button assemblies. Attach the four carriage bolts and nut/washer assemblies through all parts. Do not over-torque the screws,
- Connect the two control panel connectors to the main harness.
Replacing the Attraction Panel 34, Remove the four screws from the upper retainer at the very top of the cabinet.
- Remove the glass.
- Remove and discard the old attraction film.
- Remove any decal strips from the glass. Clean as necessary.
- Fit the new attraction panel into the cabinet. Trim to fit as necessary.
- Replace the glass.
- Replace the top-most retainer and screws.
Installing the Side and Front Decals
- Position the round decals approximately 2-1/4" from the top and sides of the cabinet. 42, Remove the paper backing from the decals and apply the decals to the cabinet. 43, Place the logo decal in the nearly-triangular box between the two playing areas. Remove the paper backing and apply it. 44, Apply the coinage decals (two per side) to each front panel of the game, vertically centering the decals at the top lock of the coin door.
Testing After Power-Up
Use the self-test to check the operation of the game. Refer to Chapter 2 for information about the self-test. We suggest that you perform the self-test when you first set up the game, each time you collect the money, and when you suspect game failure.
Setting the Coin and Game Options
The Tournament Cyberball coin and game options are set during the self-test. See Chapter 2 for information about the option settings. Installation
Game Play
This section of the manual describes the theme of the Tournament Cyberball 2072 game and the game play features.
Introduction Welcome to Tournament Cyberball 2072, celebrating 50 years of explosive entertainment! The new game includes: approximately 150 new plays (nearly 250 total), new selectable teams, unique robot players, a special challenge “Game Breakers” feature, a beat-the-coach feature, a player upgrade and team improvement (a real coin-grabber), and a selectable simplified game for beginner players. New operator features include selectable team regions (West, Central, East, and International) and a tournament feature that cancels all special options. See Chapter 2, Self-Test, for more information. Tournament Cyberball has two monitors for two teams and up to four players. Each player uses an 8-way joystick and button to call the plays and control the action. Before field action starts, the player chooses the plays with the controls. During the play, the joystick controls the robot's direction on the field. On the offense, the button controls the quarterback’s passes and laterals. On the defense, the button gives a defensive player Turbo Defense, a quick burst of speed. Tournament Cyberball 2072 can be played by one to four players; the players compete against each other or the computer. One player can play against the computer, another player, or two other players. Two players can form a team and play against the computer, or other players. A new simplified game mode has been added for beginner players. It eliminates the need for many decisions that require advanced skills, such as team selection, coach selection (vs. computer), team funds, and all player purchases and upgrades. At the same time, both offensive and defensive play selection decisions have been streamlined to allow more time for on-field action. Play Mode Tournament Cyberball 2072 rules are similar to football rules, but players must keep the ball from exploding. If the ball explodes, possession turns over. The ball status display shows whether the ball is cool, warm, hot, or critical. A critical ball will explode if it is not defused. The player can defuse the ball by moving it over the 50-yard line or goal line. On the line of scrimmage, the robot that the player controls is a slightly different color from the others. Each player controls one robot on his team. By pressing a player button before the ball is hiked, the player can control a different robot, New Players: For even more fun, two new players have been added to the game. The Power Back has the option
Installation
to pass or hand-off the ball again if so desired. This player will keep the defense on its toes! The other new player is the Outside Linebacker. With the ability for great pass coverage, look out for interceptions! Beat-the-Coach: To simulate the excitement of playing against a live opponent, a beat-the-coach feature has been added. In advanced level games, players are asked which coach they want to compete against. Each coach has a win/loss record displayed. The record is updated as actual players win and lose against these coaches. Game Breakers: An alternative to playing against a computer team is this new special challenge game. Players are presented with a list of situations to execute in order to win big bucks and advance to further levels. Like a “two-minute drill”, this mode tests the skill of players under pressure situations. A complete Tournament Cyberball 2072 game has six three-minute periods. Every player that buys into the game adds more time for everyone. The more people that play, more time everyone gets per period. If a game ends in a tie, there’s a sudden-death period to settle the score. The first team to score is declared the winner. Auto-Challenge: If one or two are playing against the computer on one monitor and a new player starts a game on the other monitor, the first player(s) are automatically challenged by the newcomer. The original players can choose to accept or decline the challenge. With the Atari buy-in-anytime feature, new players and team can enter the action anytime during the game. Player Choices: Players can select offensive and defensive plays, time-outs, and replace weak or demolished players. The new Tournament Cyberball 2072 has approximately 250 offensive and defensive plays to choose from. The offensive player can choose a running play, option play, pass play, or a time-out. After the player selects the type of play, four patterns appear to choose from. The computer chooses these four patterns based on the current ball status and yards to the defuse line or the goal line. Meanwhile, the defensive player can choose a short, medium, or long defense. The computer also presents four patterns for the player to choose from. If a Tournament Cyberball 2072 robot is damaged during the action by tackles or exploding shrapnel, the player can replace it with a better robot bought with team “funds,” which are awarded for good performance. Two stages of breakdown identify damage to a robot. A smok-
1-6 Toumament Cyberball 2072 VS. Kit
ing robot is the first warning that the robot is fatigued. A robot with smoke and fire means that a fumble will occur if tackled. Special offers for player purchases and upgrades: In “advanced” skill level games, new features have been added to allow for multiple upgrades and purchases during the game. At halftime, players may spend any portion of their team funds to upgrade their players. Even multiple upgrades of any one player are possible. Also, if your team is trailing at the end of the first, second, fourth, and fifth periods, you will have the option to use game credits (or deposit a credit at that time) to purchase top-level offensive players or stronger defensive lineups. This makes it possible for the trailing team to have a chance to be more competitive. High Score Tables: Three unique high-score tables appear in Tournament Cyberball 2072. In head-to-head games, the “Biggest Blow-Outs” table shows the most lopsided victories. For games versus the computer, the top scores are posted versus each of the four coaches, For “Game Breakers,” a table records the top money winners in this special challenge format. End-of-Game Stats: Upon completing a game, a game “Stat Summary” is shown. It posts the statistical performance commonly evaluated in today’s football, such as total yards, passing yards, running yards, completion percentage and interceptions.
The Tournament Cyberball® 2072 game tests itself and
provides visual and audible indications of the condi-
tion of the game circuitry and controls. Self-test infor-
mation is displayed on the screen and through the sound system. No additional equipment is required.
We suggest that you perform a self-test when you first set up the game, each time you collect the money, or
when you suspect game failure.
The self-test screens provide information about the
game circuits and controls. To go into self-test, turn on the self-test switch located on the SAC audio board in
the game drawer. If you tum on the self-test switch,
and then turn on the game power, the game performs the RAM, ROM, and communications tests and then
the switch test screen appears. If you turn on the self-
test switch after the game power has been turned on,
the self-test begins with the switch test.
To leave the self-test, turn off the self-test switch, and
then exit the screen by pressing any right player button. To exit the switch test screen, press any left and
any right player button together.
Self-Test
RAM, ROM, and
Communications Tests
In addition to the usual RAM and ROM tests, a communications test has been added for Tournament Cyberball 2072’s dual microprocessors, P1 and P2. If the game has an error in RAM, program ROM, or commu- Toumament Cyberball 2072 VS. Kit
nications, you will see information about the error displayed on the screen as shown in Figure 2-1 and 2-2. If the test finds no RAM or communications errors, then after a 30-second delay, the self-test goes to the ROM test without displaying a message. If the game has no ROM errors, then you will not see a message either. If you have an error in any of these tests and you see a message, you can move to the next test by pressing the right player button. If you have a RAM or communications error, refer to Table 2-1 for the location of the problem. If you have a ROM error, see Table 2-2 for information about the location of the error. If you think you have a ROM ertor, but the screen shows no message, look at Table 3-2 for information about the locations of various ROM functions.
Table 2-1 RAM Error Locations
Figure 2-1 RAM or Communications Error Message
2-2 Table 2-2 ROM Error Locations
Tournament Cyberball 2072 VS. Kit
PY ROMAT 000000 ERROR
Figure 2-2 ROM Error Message
Switch Test
The switch test is shown in Figure 2-3. Use this test to check the controls. As you press the buttons and move the joysticks, the zeros on the screen should change to ones. If they do not, follow the maintenance and repair procedures for the controls in Chapter 3 of this manual. Press any right and any left player button together to move to the next screen.
WITCH RIG REE!
AND MO OYS ce) hi APPEAR
0 0 0 0 q 0 o e)
BUTTO BUTTO
PR RIGHT A PLAYER BUTTO OR
Figure 2-3 Switch Test Screen
Coin Options
Check and select the coin options on this screen. The screen is shown in Figure 2-4. To move through the coin options, push the left joystick up or down. You can change the coin option shown in green. The factory default settings are shown in blue. To change an option setting, move the left joystick right or left. If you change an option, but then want to change it back to the previous setting, press either left player button. To save the new settings and exit from the Self-Test
screen, press either right player button. If you want to exit the self-test, turn off the self-test switch, and press any right player button to exit the screen. All your changes are saved and you return to the attract mode. The coin options are explained below. The settings, with defaults, are shown in Table 2-3. ™ Game Price is the number of coins required for one credit. @ Multiplier is the number of coins each coin counts as in the coin mechanisms. For example, if you select 2, then each coin counts as two coins. ™ Bonus Adder lets you choose bonus coins, no bonus, or free play.
Figure 2-4 Coin Options Screen
Table 2-3 Coin Option Settings
Self-Test
Game Options
Check and select the game options on this screen. The screen is shown in Figure 2-5. To move through the game options, push the left joystick up or down. You can change the coin option shown in green. The factory default settings are shown in blue. To change an option setting, move the left joystick right or left. If you change an option setting, but then want to change it back to the previous setting, press either left player button. To save the new settings and exit from the screen, press any right player button.
Figure 2-5 Game Options Screen If you want to exit the self-test, turn off the self-test switch, and press any right player button to exit the screen. All your changes are saved and you return to the attract mode.
The game options are explained below. The settings, with defaults, are shown in Table 2-4. ™ Clear High Score Table clears the high score table, if it is set to yes. ™ Restore Factory Options allows you to set all the game options to the factory options by choosing yes. If you want to use your own settings, be sure to set this to no.
2-4 Toumament Cyberball 2072 VS. Kit
Table 2-4 Game Option Settings
™ Clock Speed sets the amount of time the players receive per play period. @ Timer Bar Speeds controls the amount of time given on the timer bar shown on the play selection screen. ™ Time-Outs Per Period is the number of time-outs a player is permitted per play period. ™@ Drone Players’ Intelligence controls the responsiveness of the defensive players on the field. You can choose average, smart, or very smart. The higher the intelligence level, the faster the defense reacts. This setting does not affect the length of play time. ™ Game Breakers Difficulty adjusts the “ante” levels in each game breakers page. @ Region selects the region of teams (see Table 2-5). @ Tournament allows you to turn on or off special game offers for tournament play.
Table 2-5 Regions
Tournament Cyberball 2072 Vs. Kit
™ Auto High-Score-Table Reset automatically clears the high score table if 2,000 games have been played, and if at least 200 games have been played since the last player entered the high score table.
Statistics Screens
Use the information shown on the two statistics screens and on the histogram screen to keep track of your game use. Record the information on the Tournament Cyberball 2072 statistics page in the back of this manual.
The information shown on the two statistics screens (shown in Figures 2-6 and 2-7) is accumulated from the last time the statistics were reset. At the bottom of the first statistics screen are several
R oO
R o) R °
AROR CO.
OTAL CRED R CRED
OP
OR a
Figure 2-6 First Statistics Screen
times and dates. These are the program version dates. If you are having problems with your game, you may need to give Atari Games Customer Service this information.
You can reset the statistics when you are on the second statistics screen by moving the left joystick and pressing any left player button.
First Statistics Screen
The first statistics screen shows the following: Left/Right Screen, Lefi/Right Mech Coins show the number of coins in each of the game’s four coin mechanisms.
™ Zotal Games shows the number of unique games played. A unique game is counted from the first player starting to the last player quitting, regardless of how many times the game was continued, or how many people played. Self-Test
m O Plyr Min is the number of minutes the game was idle.
™@ 1/2/3/4 Plyr Min are the number of minutes the game was played by one, two, three, or four players, respectively. @ Error Count shows the number of errors counted in the erasable memory. If you have a count of more than 75, you should have your game serviced by a qualified service. technician. ™ Total Credits is calculated by multiplying the coins by the credit setting you chose in Game Price. @ Avg Time Per Credit is the average amount of time in seconds that each credit gave.
Second Statistics Screen The second statistics screen shows the following statistics both as the amount and as a percentage of the total games played. ™@ Comp Coach Games is the number of games played in the beat-the-coach format.
= Human-Human Games is the number of games played in the player vs. player mode. ™ Game Breakers is the number of games played under the game breaker format.
™ 1 Period Games is the number of games in which the player(s) played for only one period of the complete six-period Tournament Cyberball 2072 game. | 2/3/4/5/6 Period Games show the number of games in which the player(s) played for two to six periods. m 7-Plus Period Games shows the number of games in. which the player(s) played for seven or more periods, This means that the player(s) completed at least one Tournament Cyberball 2072 game and started another.
STATISTICS 2 PERCENT ACH GAMES. : 18 NGAMES GAMEBREAKERS: 1 PERIOD GAMES: 2 PERIOD GAMES 3 PERIOD GAMES 4 PERIOD GAMI 5 PERIOD GAMI 6 PERIOD GAMES 7-PLUS PERIOD GAMES
MOVE LEFT JOYSTICK AND PRESS LEFT PLAYER BUTTON TO CLEAR S PRESS RIGHT PLAYER BUTTON FOR NEXT TEST
Figure 2-7 Second Statistics Screen
2-5
Self-Test
Histogram Screen
The histogram (horizontal bar chart) screen shows the length of game play and the number of games played. Write these numbers on the Tournament Cyberball 2072 statistics sheet in the back of this manual to help you maximize your profit.
Playfield Scrolling Test
You can test the playfield scrolling circuitry in this screen. Use the left joystick to move left, right, up, and down. The screen is shown in Figure 2-8. Exit the screen by pressing any right player button. Toumament Cyberball 2072 VS. Kit
to move to the next stack. Exit the screen by pressing any right player button.
Alphanumerics Test
The alphanumerics test checks the condition of the alphanumerics in the game. The screen is shown in Figure 2-10.
Figure 2-8 Playficld Scrolling Test
Motion Object Test
The motion object (moving object) test screen is shown in Figure 2-9. This tests the movement and color of various game objects. Choose a stack with the left player button. Use the left joystick to move the stack. Press the left player button Figure 2-10 Alphanumerics Test If you see an error on the screen, check the EPROMS. at 15N and 16N. Press any right player button to go to the next test.
Color Test
This test indicates the condition of the video display color circuits. The screen is shown in Figure 2-11. The left side of the screen should be black and change to grey in the middle. To the right of the grey the screen should appear red, green, blue, and white from top to bottom. If the screen does not fit this description, see the video
Figure 2-9 Motion Object Test
2-6 Figure 2-11 Color Test
PRRCEhee Tournament Cyberbail 2072 VS. Kit
display manual included with the game for adjustments. Exit the screen by pressing any right player button.
Color Purity Test
The color purity test has five screens. The first screen is shown in Figure 2-12.
RED
Figure 2-12 Color Purity Test These screens show the condition of the color purity circuit in the video display. Each screen should display a rectangle of color, with no curving at the corners and no lines in the display. The screens are red, green, blue, white, and gray. If the screens are not correct, see the video display manual included with the game for adjustments. Exit each screen by pressing any right player button.
Convergence Test
The convergence test is shown in Figure 2-13. This test has three screens. The first is white, the second is purple, and the last is green. Self-Test
Check the following on the screens: ™ The grid lines should be straight within 3.0 mm and the lines should not pincushion or barrel. ™@ The convergence of the lines on the violet and white screens should be within 2.0 mm. If these screens do not meet these criteria, see the video display manual for suggested adjustments. Exit the screen by pressing any right player button.
Sound Test
The sound test indicates the condition of the music and sound effects circuits on the SAC PCB. (This board replaces the Stand-Alone Audio Board used in previous games.) The sound test screen is shown in Figure 2-14. The sound microprocessor resets at the beginning of the test. You will hear the first sound three seconds after the test starts.
SOUND TEST
CURRENT COIN VALUE 0000 NUMBER OF SOUNDS 223 SOUND CPU STATUS GOOD. SOUND a MUSIC CHIP FEST. PRESS LEFT PLAYER BUTTON TO HEAR SOUNDS
MOVE LEFT JOYSTICK TO'SELECT SOUND. PRESS RIGHT PLAYER BUTTON FOR NEXT TEST
Figure 2-14 Sound Test After the microprocessor is reset and you hear the first sound, the number of game sounds and the sound CPU status information appear. If the CPU is good, the word Good appears. If you get an error message at any point in the sound test, see Table 2-6 for more information. The test cycles through the following tests: ® Music Chip Test m Sampled Audio Test im SCOM Reset Test Use the left joystick and the left player buttons to select sounds and listen to them. To leave the self-test, switch off the self-test switch, and then press any right player button to return to the attract mode.
Self-Test Toumament Cyberball 2072 VS. Kit
Table 2-6 Faulty Sound RAM and ROM Locations
2-8
OD O 8 2,
This chapter contains troubleshooting tables for your Tournament Cyberball® 2072 VS. conversion kit.
One table has general troubleshooting information, the second contains the voltage levels and test points on
the PCBs, and the last is a table of ROM-caused problems with specific ROMs to check and replace.
The tables in this chapter can help you troubleshoot problems in your game. The troubleshooting table lists possible sources of problems of various parts of the game The voltage inputs and test points can help you troubleshoot PCB problems. The ROM problems table can help determine exactly which ROM might be causing game play problems.
Troubleshooting Tournament Cyberball 2072 VS. Kit
Table 3-1 Troubleshooting Table
he | ‘Mot correct, cl he Vand the
3-2
Toumament Cyberball 2072 VS. Kit ‘Troubleshooting
Table 3-2 Voltage Inputs and Test Points on the PCBs
Table 3-3 What ROM Problems Look Like
3-3
Troubleshooting Toumament Cyberball 2072 VS. Kit
N O T E S
3-4
Ghapter 4
Illustrated parts lists
This chapter provides information you need to order parts for your game. Common hardware parts, such as
screws, nuts, and washers are usually not listed in the parts lists.
The parts lists (except for the PCB parts lists) are arranged alphanumerically by Atari part number. All Aprefix numbers, which are assemblies, come first. Next are part numbers with six numbers followed by a
hyphen (000598- through 201000-). Ending the list are part numbers with a two-number designation followed by a hyphen (00- through 99-).
The PCB parts lists are arranged in alphabetical order by component. Within each component list the parts are arranged numerically by part number.
When you order parts, give the part number, part
name, the number of this manual, and the serial num-
ber of your game. With this information, we can fill your order rapidly and correctly. We hope this will create less downtime and more profit from your
games.
Atari Games Customer Service phone numbers are listed on the inside front cover of this manual.
Illustrated Parts Lists Tournament Cyberball 2072 VS. Kit
Items Not Shown: 047420-02 047418-02 Right Control Panel Decal Right Attraction Film TM-341 wi Graphics Tournament Cyberball 2072 VS. DualSystem Kit 4 Installation Instructions 046184-02 Right Coinage Decal (two) 047419-01 Logo Decal 047418-01 Left Attraction Film wi Graphics
A044963-22 ‘SAC PCB Assembly 047171-01 (see Figure 4-3) Side Panel Decal (2 places)
175008-002 White Nylon Washer
047420-01 Left Control Panel Decal J OAT&SA-01 Control Panel Cover
A047430-01 12V Power Harness Assyembly
171078-002 Coin Counter
176015-112 #10 x 3/4", ‘A047433-01 Cross-Recessed, Video Harness Deep-Thread Screw Assembly
A047147-01 ‘Tournament Cyberball 2072 Game PCB Assembly : 046184-01 (see Figure 4-2) Z as Left Coinage Decal ‘ (2 places) 047432-01 : PCB Guide Cleat | : A047425-01 '76020-212 Main Harness ‘ Assembly Cross-Recessed Screw __ A047417-01 Component Plate Assembly (consists of six items— see parts list)
Figure 4-1 Tournament Cyberball 2072 VS. Kit Assembly A047415-01 B
4-2
‘Toumament Cyberball 2072 VS. Kit Illustrated Parts Lists
Figure 4-1 Tournament Cyberball 2072 VS. Kit Assembly Parts List
Part No. Description Part No. Description
| 046184-01 | Left Coinage Decal (two) | A044963-22 | SAC PCB Assembly (see Figure 4-3) |
| 046184-02 | Right Coinage Decal (two) | A047147-01 | Tournament Cyberball 2072 Game PCB |
| 047171-01 | Side Panel Decal (two) | Assembly (see Figure 4-2) |
047418-01 Left Attraction Film w/ Graphics A047417-01 Component Plate Assembly, consisting of
| 047418-02 | Right Attraction Film w/ Graphics | the following six items: | |
| 047419-01 | Logo Decal | 047416-01 | Component Mounting Plate |
| 047420-01 | Left Control Panel Decal | 149006-001 | 5 V, 13 A Switching Power Supply |
| 047420-02 | Right Control Panel Decal | A047429-01 | Transformer Termination Assembly |
75-99518 #8-32 Nut/Washer Assembly
| 047431-01 | Control Panel Cover (two) | A047427-01 | 5 V Power Harness Assembly |
| 047432-01 | PCB Guide Cleat | A047428-01 | AC Power Harness Assembly |
171078-002 Non-Resettable, 12 VDC Terminated
| Counter | A047425-01 | Main Harness Assembly | |
| 175008-002 | .187-Inch-Thick White Nylon Washer | A047430-01 | 12 V Power Hamess Assembly |
A047433-01 Video Hamess Assembly
| 176015-112 | #10 x 3/4-Inch-Long, Cross-Recessed, | A047434-01 | Com/Aud Harness Assembly |
| Deep-Thread Screw | TM-341 | Tournament Cyberball 2072 Vs. | |
| 176020-212 | #8 x 1 1/4-Inch-Long, LPW, Deep-Thread, | DualSystem Kit Installation Instructions |
Cross-Recessed Screw
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Toumament Cyberball 2072 VS. Kit
157209-008, cer OAR?
TIGD-07S 137401-001,
ty — +\/- + 3300,25vf 3300,25V
tea} a6 Mlustrated Parts Lists
a7
- + + B( sse0.2su) s300,250 ¢34|
foal
SAC = cae { } ces {+
PER ATARI © 88 MADE IN USA AOY4 963
coxa} [reex}\
Figure 4-3 SAC (Sampled Audio Cruncher) PCB Assembly A044963-22 D NOTES: A\ testa carncrrons cer,corn ano cee,cuen IN pence, A INSTALL 16'S 58,5C,7A AAD 7C MITH IC PIN 4 IN SocKET PIN 3 5 SHOWN:
Illustrated Parts Lists
N Toumament Cyberball 2072 VS. Kit
E S
2 hapier 5
Schematic Diagrams
About this Chapter...
This chapter contains the schematics and wiring diagrams for your Tournament Cyberball® 2072 VS. Dual- System kit. They are arranged in the following order:
® Hitron switching power supply
= Audio power transformer
= Game PCB
m= Memory map
m Main wiring diagram
m SAC PCB
The two PCB assembly drawings are illustrated in Chapter 4.
Schematic Diagrams Tournament Cyberball 2072 VS. Kit
RAM and Communication Error Locations
Se ae ee
Se
Figure 5-1 Faulty RAM/ROM Tables
5-2
5-3 Figure 5-2 Hitron 5V, 13A Switching Power Supply, Audio Power Transformer 149006-001 GENaW Teazov TRI At w ow FY | iB Ics Os | of! 2 THES Crvocesd 2y ealgzege Dis on rr iv ioe oe Blk.
Audio Power Transformer d on
400 AS Jay 3} 1S. Zoyhn sy ae San FRGP ISB
RI ae FB “7n Re CI
- RIK RESISTOR 1/4W UNLESS
OTHERWISE SPECIFIED
C15~18: 2200uU/10V Bik. Grn. Tournament Cyberball 2072 VS. Kit Schematic Diagrams
Schematic Diagrams
39-72,75-113, 115-129, 191,134- 440, 142°151
cn opr tO ne hone
St __ sorte ame goPT3 if —Onts Hoe oe sorts TG HOLE,
gar 10K Lso4 Oe Toumament Cyberball 2072 VS. Kit
Tournament Cyberball 2072 VS. Kit Schematic Diagrams
Figure 5-3 Tournament Cyberball 2072 Game PCB Assembly Schematic Diagram, Sheet 1 of 12
o67148.01 C
5-5
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Schematic Diagrams
uz .as——i4
= ono = ono
Ca u2.7es—tfSo12___uz.as (so4 ef v2.8 So4 ue. Lso4
ue.scom 9/10F 7 4 p2— va. /COMACK U2. /OTRCK: Pome ve. /eoppck 18g UR U2. /COMW L832 U2. /COMPCK. ea
- % U2. /COMR Uz. 7® ‘saa
5-8 Toumament Cyberball 2072 VS. Kit
U2. /TACK
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Schematic Diagrams Toumament Cyberball 2072 VS. Kit
poaDDEDe useaa
Sites ez gi « 2.2.2.8 2 2 2 pure-aay “ 470 3] x 7PL,
PLY2~10, 4 PLY2=9, PLY2-8. pLr2-7 04 Pure 03 Se z PLY2-3. ‘09 xeY PuY2-1
PLYS-1:
PLY3=10. pe—u.01s ecrae U.D13 gtyas! UL042 2 U:022 at 010 PLY3-4 U.09 PLY3-3: a KEY PLY3-200 $
Rua? Ri16 Ria R113, Riz Ris
SERBSRRR ecccecce
5-10
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Schematic Diagrams Tournament Cyberball 2072 VS. Kit
3| =, 24F 24F Loa = ov Sm — 50450870 A isos “iso
71400 Fo4 Fos ap oF 9/10F ay—t 6 13, a FO Er = LT snot av. Ls3z a7 42H Fo4
aK Fos oF qisiue eS aim rg cSYNC a.24—{So4—a./ SNE Foo 4am 2H roa weeny a we 1H il aHeH n TF Foz veLank—ty BLANK Lso4
5-12
Tournament Cyberball 2072 VS. Kit Schematic Diagrams
“ ft hg i ga 1 $a 1 qj jr @ oS ve. oma abun 70mA rmi—2tr al sanz Hex a2 —u. TIMER oe. ery
> GND js PALLTL ssv-gHt pif: atit—R.SELO Hh » abe R-SELL att pee 1 Z| i Femmes} a TH—31 & ofi$—a.24 mi—41 of 3 —U, SEL, sane—E foe a Eu Tne ig
pe B:Ote—s10" prs! yam Rotates A:otO—IeS aut tt A:B2—aaje weakly 14d 2-08 ]ot Sar r poral py? —cans a st fa a is aa 7BESPC2—22| arc prmal 3 —52,0/H fs 4 16H Peve—stlece set So ee.Ue 3 ype [U6—etlese xr i ' pecus—taless xestSt—S2-US a met Tk Pacue. ml} = GNO
Figure 5-7 Tournament Cyberball 2072 Game PCB Assembly Schematic Diagram, Sheet 5 of 12
sA7148.01 C
5-13
it Tournament Cyberball 2072 VS. Schematic Diagrams
ei estsy 5 ests1 5} pI ests 9] n8ge.54a80 | BSTB0585S. BSBBeB8S8e sisiafs| lems) fells weebe!
sent v-A3
44. 1aHs. 16H Az.
1H: HS. 8H. aoae 4 = E| ral 2 3 FLeasoseae a ¢ 28
e ¢€ ¢ eS uelS eae ah af
FRew
PR, ane.
FR.
MR.AL3. /LHEADE. LASTER
R-SELL—& RISELO.
5-14
Tournament Cyberball 2072 VS. Kit
BEGS axxes an fpeseaParees
i i Ht
(8
Ry ae
DDDDDDDD reas, Schematic Diagrams
Figure 5-8 Tournament Cyberball 2072 Game PCB Assembly Schematic Diagram, Sheet 6 of 12 047148-01 C
5-15
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Tournament Cyberball 2072 VS. Kit Schematic Diagrams
8.042 ALLL A.D4t. A019 A.OL0. a is om —
S65 DD
288288: s374 ReQboR0R Guocoee]
fiat S85 Pr
BooG
820194] A2.VG 2.05 R2.04 F
usa74 enempepe of
F os Pixi}3$— a2. vt Joo ptxop2?—a2.¥e PO. To bee T 15 3 Pa Tab os sexs 3s—02.y3 Sine prxe}e—A2.V2
oe]
tet a2: S40 Fine Vs 18K sth ave Pie AAO: ‘LS8e ‘OND
Figure 5-9 Tournament Cyberball 2072 Game PCB Assembly Schematic Diagram, Sheet 7 of 12
047148-01 C
5-17
Schematic Diagrams Toumament Cyberball 2072 VS. Kit
ML RIS MLA RLG MLRLZ
Tt MEREO z Nt RS MARE Lsz44 Ls374 peeepece Fy i il Aspengnanattlt M.RAS- Zo MBE Vaio vii fase HR: 40 ACRE. Ao nD 2 | A M.RB.- 489
a0
rf] ade foe Lseas
97408
ZHSYNC MALS MAL?
MALS MALS
5-18
Toumament Cyberball 2072 VS. Kit Schematic Diagrams
| HARBL- | aZly | alts | Ri | ||
| 4. R30- | 410 | as | meeia | age. | sax |
| R29. | 419 | aR | M2-RL3 | 74h | tube |
| wirea——1p | + | 42. RL2 | 8.03 | loa | |
| HR27. | Zo x oe | 42-811 | R02. | Loe | |
| as | ee | Gees | |||
| 5 | aq | " | -09. | to0 | |
| MR2e | a89 ~ gt? | M2.RB | M2.RLS- | ors as} #5 — 2.07 |
" ay i
| ——lasfe | re | oe | an} — m2, v4 |
2 cs ay ae eee gs
| rH | Roe | : |
; eacree
| ate | Me-R4 | 08 | sé |
| a | Me.R3 | os peas $82 va | |
| ae, | Me. Re. | Ine prxet SS — 2. V2 |
mecRO—e toe Sif! ne vb
| i— | rao | Aa | sial | |
| 228 | ey | Ww | $4u0 | |
| nerea—lel, | ise | ver? | rune | ans ay |
| wre | abs | M2-RG | STRAT: | STATA |
| pares | Zo | a | p—— 2.3 | |
| TRH BSE | rear | =o0 | =o | |
| . | 0% | al | a | |
| MORE | Bio" 8 a7 | 2-R0 |
[| 401.874 22h a elle | m2./M Re ‘
| RS- | q | r |
in x al Ret Alo & RE oq
| RO: | a a | itera |
5 2.HF sous Sif /240aH Sap 205 He. HF- vaae ay ete : Hf ys _J 20: see
Figure 5-10 Tournament Cyberball 2072 Game PCB Assembly Schematic Diagram, Sheet 8 of 12 osniseo1 Cc
5-19
Tournament Cyberball 2072 VS. Kit Schematic Diagrams
NOSE wee, “su
Poeenaeeeee ptctege ge acid EPEEEEEEEEEEEE
Az
R23 Re R21 R20 Ron.
4, 1, M M. M1, M. M M, wi-Ze Nos? 5888 4 Sai till 2
M.Romi—lee [ee .R23° MMA. MARE MME MOREL Rez Ris Ra RI Ri a =
a re lar o?| Mikes macne—Slee oe n = qagegiae EEEEEREEE gedenens y PECEREAE F rrrrrere
qu BEBsHeA Bw zezerge4} il FT ge geaakae Sx
EEEEEE =
5-20
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Schematic Diagrams Tournament Cyberball 2072 VS. Kit
a8 35N | 47 sexseee
FE
LL.U7 Live LAYS LA. V4
| mt.v3—? _ | as | Ht. 7. | Ha ft | |||
| mt.ve—t | soi | sO | ve OES | Be | ||
| 7m | az | C3 | + | . | ja | Sr |
| hier | Fea | 08 | FOO | 1.0421 ~ VE | ||
| 7 | i | 10 oo | ||||
| * | a | Lys |
v0! ee tere same: are Rae
usza4
5-22
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Toumament Cyberball 2072 VS. Kit Schematic Diagrams
KEY vID!-3 Mlolshsfs eooDeoeG Hc273
s NOs yioi-2 sf Vi. /Pt =
R137 _ft38 20m vIDi-4 17] i lo al ra) Hye tie
- Bio @ aft — ao Soe 101-5 jo Fl vi qo n 6 Noe aa ar “ SE ot = x EIi—iszeo “uae bad ial R19 R128 vir cs, 2. os: #t Jo« our} R140 R199 | LUELS ying
Figure 5-13 Tournament Cyberball 2072 Game PCB Assembly Schematic Diagram, Sheet 11 of 12
47148-01 ©
5-25
Schematic Diagrams ‘Tournament Cyberball 2072 VS. Kit
v2.A5.
yess. See x sl.
PRPRE ERE is fal v2-L4 v2.84 35y. ts133 F374 ry
24K v2.3. ve.L3. v2.83. & ve.Re. te Bon vaste v2.82. +8y. RE°oRRe & gees” t =
v2.At v2tky v2.83 $V:
¥2.R0 ve-Lo— The vezso v2. BLANK —aLs, mt soooooeG
oe ts153 25) ORPRE°BER gi B:
Fa FE ae z »
Be. a7 se F245 eoccs00a bia BE Prcteue oS8S85850
Tare.
26s
F374 jeopeopee 82.0
5-26
Tournament Cyberball 2072 VS. Kit Schematic Diagrams
R121. los jo4 OUT pe VIO2-1 lo: RER Ri46 loo 2K aK oo
a 7 ah 25m vipe-2 ve.sPt a
vIDe~4
vipe-s
vine~6
vioe-7
| __HSYNC2s yrog-t4
|-_ZESINCZ s ying~9
Figure 5-14 Tournament Cyberball 2072 Game PCB Assembly Schematic Diagram, Sheet 12a of 12
os7148-01 C
5-27
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Tournament Cyberball 2072 VS. Kit
we me. sn3—telese WR.Ar2—Ejeae 2 wRoAti—Ee fans © wRoAt0— Eb lave RAI — ELA mR-Ap—ES tng 2
| MRA? | —Har | ori — 015 | |
| HRA | nc | gS | oR |
| mecas——Sles | —os[ $2 | —wR-23 |
aes Bea s 3 ¥ tacne—Elne cele — re -O40
| teat | Tle | on 82 Me -9 |
| mRAO— Eno | oo) | MR DB |
ie FR. /WH. er}eojee
TTA
8. z. ® BRSSSE3 BeReRES RSLRBLPRRVII RERREPREs Schematic Diagrams
Figure 5-14 Tournament Cyberball 2072 Game PCB Assembly Schematic Diagram, Sheet 12b of 12 4748-01 C
5-29
Schematic Diagrams
Memory Map
Main Processor (P1) Tournament Cyberbali 2072 VS. Kit
Every time the main processor (P1) is reset, the video processor (P2) is also reset. P1 must clear P2's reset.
ADDRESS BUS 2222 1111 1111 1100 0000 0000 DATA BUS 1111 1100 9000 0000
| ADDRESS | ISTZE | {| 3210 9876 5432 1098 7654 3210 | R/W] 5432 1098 7654 3210 | | FUNCTION | ||
| 000000-O07FFF {16KW | | | O--- -000 OAAA AAAA AAAA AAAA | R | DDDD DODD DODD DDDD | SHORT ABSOLUTE PROGRAM PROM | |||
| 008000-O0FFEF [16KW | | | -000 1AAA AAAA AAAA AAAA | R | DDDD DDDD DODD DDDD | SLAPSTIC PROGRAM PROM | |||
| 010000-O3FFFF |96KW | | | OAR | 1 R_ | DODD DODD DDDD DDOD | LONG ABSOLUTE PROGRAM PROM | ||
| 040000-O7FFFF |28KW | | | 1A | 1 R_ 1 DODD DDDD DODD DODD | UNIMPLEMENTED PROGRAM PROM | ||
| FC0000-FC03FE 1S12B | | | --00 | 1 R/W | | DDDD DDD | EEROM | |
| C8000 | 1 | ' | --00 | t Rt | DDDD DDDD | AUDIO READ |
| FD0000 | 1 | ' | --01 | tw | | FEROM UNLOCK |
| FD2000 | 1 | I | ~-01 | iw | | AUDIO RESET |
| #4000 | ' | 1 | ~-01 | Iw | | WATCH DOG |
| FD6000 | fl | 1 | --01 | Iwo | | RESET P2 (ACTIVE LOW) |
| D8000 | 1 | I | =-01 | Iwo | DDDD DODD | AUDIO WRITE |
| FE0000 | 1 | 1 | ~-10 | | R | DODD DDN DDDD DDDD | SWITCH 1 (TEAM 1) | |
| 1 | 1 | ' | in) | | SELF TEST | |
| 1 | 1 | ! | a) | | UNUSED | |
| 1 | ! | 1 | on) | | RIGHT ACTION | |
| 1 | 1 | 1 | IoD | | FREEZE (DEVELOPMENT ONLY) | |
| 1 | 1 | 1 | ! | pop | | RIGHT PLAYER JOYSTICK (L,R,D,U) |
| ! | ! | | | | | DD | | UNUSED |
| ! | | | I | | | D | | LEFT ACTION |
| | | ! | ! | i | D | 1 STEP (DEVELCPMENT ONLY) |
| ! | fl | 1 | 1 | DDDD | LEFT PLAYER JOYSTICK (L,R,D,U) | |
| E1000 | t | | A--- --10 0-01 ---- ---- ---- j R | | DDDD DODD DDDD DODD | SWITCH 2 (TEAM 2) | ||
| 1 | ! | i | ID | | VBLANK | |
| 1 | ( | 1 | a) | | UNUSED | |
| 1 | 1 | 1 | i) | | RIGHT ACTION | |
| 1 | i | I | 1 | oD | | REPLAY (DEVELOPMENT ONLY) |
| ' | ! | i | ! | pppp | | RIGHT PLAYER JOYSTICK (L,R,D,U) |
| 1 | 1 | 1 | { | pp | | UNUSED |
| | | 1 | 1 | i | D | | LEFT ACTION |
| 1 | i | 1 | 1 | D | | UNUSED |
| | | i | I | 1 | DDDD | LEFT PLAYER JOYSTICK (L,R,D,U) | |
| FES000-FESFFE |2KW | | | 10-- AARA AAAA AAAO | R/W | DDDD DODD DDDD DDDD } COLORAM 1 | |||
| FECOOO-FECFFE |2KW | | | 11-~ AAAA AAAA AAAQ | R/W | DDDD DDDD DDDD DDDD | COLORAM 2 | |||
| FFQOO0-FFLEFF [KW | 1 | QOOA AAAA AAAA AAAA | R/W | DDOD DDDD DDDD DDDD | PLAYFIELD 1 PARAMETER RAM | |||
| FF2000-FE2FFF |2KH | | | 0010 AAAA AAAA AAAA | R/W | DDDD DODD DDDD DDOD | ALPHANUMERICS 1 PARAMETER RAM | |||
| FF3000-FF3FFF |2KW | | | 0021 AAAA AAAA AAAA | R/W | DODD DODD DDDD DDDD | MOTION OBJECTS 1 PARAMETER RAM | |||
| FF4Q00-FFSEFF [4K | | | O10A AAAA AAAA AAAA | R/W | DDDD DDDD DDDD DDDD | PLAYFIELD 2 PARAMETER RAM | |||
| FFG6QOO-FFGEEF |KW | 1 | 0110 AAAA AAAA AAAA | R/W | DDDD DDDD DDDD DDDD | ALPHANUMERICS 2 PARAMETER RAM | |||
| FF7000-FF7EEF |2KW | | | 0111 AAAA AAAA AAAA | R/W | DDDD DDDD DODD DDDD | MOTION OBJECTS 2 PARAMETER RAM | |||
| FF8000-FFSFFF [4KW | | | 100A AAAA AAAA AAAA | R/W | DDDD DDDD DDDD DDDD | COMMUNICATIONS RAM | |||
| FFAQQO-FFBFFF |KW | 1 | 101A AAAA AAAA AAAA | R | DDDD DDDD DDDD DDDD | P2 PROTECTED PROGRAM RAM | |||
| FFCOOO-FEFFEF |8KW | | | 11AA AAAA AAAA AAAA | R/W | DDDD DDDD DDDD DNDD | P1 PROTECTED PROGRAM RAM |
5-30
Tournament Cyberbail 2072 VS. Kir Schematic Diagrams
Memory Map
Video Processor (P2)
Everytime the main processor (P1) is reset, the video processor (P2) is aiso reset. P1 must clear P2's reset.
ADDRESS BUS DATA BUS
2222 1111 1111 1100 0000 0000 1111 1100 0000 0000 ADDRESS { SIZE | 3210 9876 5432 1098 7654 3210 1 R/W | 5432 1098 7654 3210 | FUNCTION
000000-O07FEF 116KW | R | DDOD DDDD DDDD DDDD | SHORT ABSOLUTE PROGRAM PROM 008000-03FFEF |112KW | R_ | ODDD DDDD DODD DODD | LONG ABSOLUTE PROM 040000-O7EFEF |128KW 1 } R_ 1 DDDD DDDD DDDD DDDD | UNIMPLEMENTED PROGRAM PROM
| FC0000 | ' | 1 | Iw | | SCREEN INTERRUPT ACKNOWLEDGE | |
| FECOOO | 1 | i | | R_ | DDDD DDDD DDDD DoDD | SWITCH 1 (TEAM 1) | ||
| 1 | 1 | i | iD | | SELF-TEST | |
| i | 1 | 1 | 1D | | UNUSED | |
| 1 | 1 | 1 | i) | | RIGHT ACTION | |
| | | 1 | ' | i | D | {| FREEZE (DEVELOPMENT ONLY) |
| | | 1 | } | t | ppp | | RIGHT PLAYER JOYSTICK (L,R,D,U) |
| t | ' | i | ' | Dp | | UNUSED |
| 1 | Hi | i | 1 | D | | LEFT ACTION |
| I | 1 | Il | ! | D | | STEP (DEVELOPMENT ONLY) |
| 1 | 1 | 1 | 1 | Dp0D | LEFT PLAYER JOYSTICK (L,R,D,U) | |
| FE1000 | 1 | | 1--- --10 0-01 ---- ---- ---- | R | DDDD DDDD DODD DODD | SWITCH 2 (TEAM 2) | |||
| | | 1 | 1 | a) | | VBLANK | |
| I | 1 | 1 | i) | | UNUSED | |
| i | ! | 1 | IoD | | RIGHT ACTION | |
| 1 | ! | 1 | iD | | REPLAY (OEVELOPMENT ONLY) | |
| 1 | i | 1 | ! | ppp | { RIGAT PLAYER JOYSTICK (L,R,0,U) |
| 1 | 1 | | | 1 | DD | | UNUSED |
| 1 | | | | | 1 | D | | LEET ACTION |
| | | | | rt | 1 | D | | UNUSED |
| | | 1 | 1 | i | DDDD | LEFT PLAYER JOYSTICK (L,2,0,0) | |
| FESOQO-FE8FFE j2KW | | | | R/W | DDDD DDD DDD DODD | COLORAM 1 | |||
| FECQOO-FECEFE |2KW | | | 1 R/W | DDDD DDDD ODDD DDDD | COLORAM 2 | |||
| FFOQQ0-FFIEFE |KW | 1 | 1 R/W | DDDD DDDD DODD DDDD | PLAYFIELD 1 PARAMETER RAM | |||
| FEF2000-FF2FFF |2KW | | | | R/W | DDDD DDDD DDDD DDDD | ALPHANUMERICS 1 PARAMETER RAM | |||
| FF3000-FF3EFF |2KW | | | { R/W | DDDD DODD ODDD DODD | MOTION OBJECTS 1 PARAMETER RAM | |||
| FF4QQ0-fFSFEF |KW | 1 | | R/W | DDDD DODD DDDD DDDD | PLAYFIELD 2 PARAMETER RAM | |||
| FE60Q00-FF6FEF |2KW | | | | R/W | DDDD DDDD DODD ODDD | ALPHANUMERICS 2 PARAMETER RAM | |||
| FETQ00-FE7EEE j2KW | | | | R/W { DDDD DDDD DODD DODD | MOTION OBJECTS 2 PARAMETER RAM | |||
| FF80Q0-FFOFFF [KW | ! | | R/W | DDDD DDDD DDDD DDDD | COMMUNICATIONS RAM | |||
| FFAQQO-FEBEFF |4KW | | | { R/W } DDDD DDDD DODD DDDD | P2 PROTECTED PROGRAM RAM | |||
| FECOOO-FEFFFF |KW | | | | R_ | DDDD DDD DODD DDDD | P1 PROTECTED PROGRAM RAI |
Figure 5-15 Tournament Cyberball 2072 Memory Map
ZERO DUVAGHS Bd OVS WL SA ZL0Z [eq39q4D quaureuINoL,
zEe-S suraSeyg spews
Tournament Cyberball 2072 VS. Kit Schematic Diagrams
MAIN PCB SCHOMATIC 047147-01
P 8 gee Pare 2 gen 2 gen < Busg8bs . sush8bs . nuskdbs - 2558853 E[-anvooe!| d[-aneoees| f[-aneneet] E[-anwncetl] aa z %) Bls|a/33) BS glel>\2] 0] Bp BlelzZh pee
‘St OPTION ‘S2 LEFT § SSRIGHT &
s4dow ie su BS sages fo ne-ne mae RIGHT PLAYER: LEFT PLAYER: RIGHT CONTROL PANEL ‘$8 OPTION ‘S7 LUFT & ‘'S8 RIGHT 2 'S9 DOWN § ‘S10 UP
Figure 5-16 Tournament Cyberball 2072 Main Wiring Diagram 047426-01 A
5-33
Schematic Diagrams Tournament Cyberball 2072 Vs. Kit
a g
S8R8 I WQvEzeoo LS163A
“su
/AOKINT.
/OATIN———4}
76 BKRES.
5. merdoal L832
RW
7008
o $a Ls32
L_vas
5-34
Tournament Cyberball 2072 VS. Kit Schematic Diagrams
PALLGRS Seopeesd I
‘AC. R74
ms_ihe a ese oz 7 mage 83 Pre ze a2 ago mal, gl anal aoe 3 eel gy Le siyo al ae 4 som of
| Be Slog | gL 42 | 013 | ape at |
ai Staaf ete aio Ol
| cr | | | ig? | ro | |
| ai—ijne oe $3 10 | ow | HEATSINK | ||
| ate | Loy | tay. | FOR | | |
| Fae a | 1 | 1oR2030 |
6 081 Oe Le uws2 1 pale +su r--- HEATSING 7REMB. To c7s TOR2030 1 L _Hsa |
. cea ve a Bi Blese oz ma 2182 25 ating SS ane ae a2
Figure 5-17 SAC PCB Assembly Schematic Diagram, Sheet 1 of 3 044963208
5-35
Schematic Diagrams Toumament Cyberball 2072 VS. Kit
BR Aid| a Pree ery
se ese oz sa lay SS south aro [et sa Sattler orf t2 sor ‘sea—¢ peL——s06 = sels Os ‘cn Suelo se 3/83 Oars Soe She aia ot S01 sa—o]m fh $08
4A 3 e ee =|
oS a Sores ae smi], | AY PMRES: ik SELF-TEST- Ra gRe SRT NAT UR 10- /SYSRES +1404) 1k FI FAK pay SFULL. COIN4 Rd R100 JQOIN- 12 60TH 10,4740 SCOIN- 2¢E TNE JCOIN- 3, JCOIN-4, R13 inaoot cc2+
5-36
Tournament Cyberball 2072 VS. Kit ‘Schematic Diagrams
seuss [7 ‘seul fatto oct
| saz] | » 170 | raed | |
| sauiil: 2 v9] | ro) | ant | TRO |
saul 3 ira] + z
| syd We | ae | a jisses | . |
| 1 v9 | vy | te |
2|t* v9 900K. a SR//W— 41 | aR jLS393
7 7 fox b—vestat = oe bee “ 3 SEE aero : B13]
3 JSCOM=1
| la | rep45— /PWRP | a |
mer or JSCOM-9 D6 0s resp4*— /snoRES hell B bee D3 ru nat ne os eusybS— sFULL, sm soft? __|__ fue LOBTAS sscoH-3 esac 470 Lee ferus | 10 ioopr
| je” | | scon | LF |
cK, te —_— FOUTS sscom-6 rt
i FINS yscom-4 ‘inopr JSCOM-2 mss = ou] aud SELF-TEST.
JSCOM=1
Figure 5-18 SAC PCB Assembly Schematic Diagram, Sheet 2 of 3
A044963-XX E.
5-37
Schematic Diagrams Toumament Cyberball 2072 VS. Kit
R73, 19K R75 $R76 19K
pats ea ee = 7153 4 00, DAg——Hes Ss R68 Pits Peer lp La 0n3——t es COA og ‘on2——? jane = [oxo cea
2oa0rF|
5-38
Tournament Cyberball 2072 VS. Kit ‘Schematic Diagrams
Figure 5-19 SAC PCB Assembly Schematic Diagram, Sheet 3 of 3
AOLE9GB-XX E
5-39
Tournament Cyberball” 2072 Statistics Sheet
Statistics Screens
First Statistics Screen
Left Screen, Left Mech Coins Left Screen, Right Mech Coins Right Screen, Left Mech Coins Right Screen, Right Mech Coins
Total Games 0 Player Minutes 1 Player Minutes 2 Player Minutes 3 Player Minutes 4 Player Minutes Error Count
Total Credits Average Time per Credit
Seconds Number of Credits
0-39 40-50 60-79 80-99
100-119 120-139 140-159 160-179
180-199 200-219 Second Statistics Screen
Computer Coach Games Human-Human Games
Game Breakers 1 Period Games 2 Period Games 3 Period Games 4 Period Games 5 Period Games 6 Period Games 7 Plus Period Games TILT |
Histogram Screen
Pa} fo} > Seconds Number of Credits
220-239 240-259
260-279 280-299 300-319 320-339
340-359 360-379 380-399 400 & Up
oS, LATTA |
Warranty
Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays and laser-video disc players (in games supplied with displays and video-disc players) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller’s other products or parts thereof are warranted. If the products described in this manual fail to conform to this warranty, Seller’s sole liability shall be, at its option, to repair, replace, or cfedit Buyer's account for such products which are returned to Seller during said warranty period, provided:
- Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
- Such products are returned prepaid to Seller’s plant; and (©) Seller’s examination of said products discloses to Seller’s satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation, or improper testing. In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages. Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms herein, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller’s part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products by Seller.
The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to you and others. Be very cautious in using non-Atari-supplied components with our games, in order to ensure your safety. Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari Games Corporation cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor.
AN
ATARI
GAMES
Atari Games Corporation
PO Bow 3-11 1¢
Milpiias, CA 95035
This kil Is designed and mar Games Corporation Il 1s not dese