CATHODE RAY TOMES

Pole Position II Brake Failure Bulletin

Pole Position II (Japan) (Namco, 1983) · Service Bulletin · 1 pages · original scan

Page 1

Brake Failure

Pole Position I! Sit-Down

If after installing Pole Position II in a Pole Position sit-down cabinet the brake fails to work during game play, then make the following modification to the Pole Position CPU board: © Solder a 2.7 k0 resistor across C12 (a 0.1 «F capacitor located next to the Type-4066 integrated circuit at location 8K).