Virtua Fighter 4 Evolution
Virtua Fighter 4: Evolution (Version B) (Japan) (GDS-0024C) (Sega, 2002) · Manual · 38 pages · 38 sections · original scan
1ST PRINTING OCTOBER ‘02
Universal Kit
Kit Installation Instructions
& Service Manual
Switchable FROM High Resolution 31K TO Standard (Low) Resolution 15.75K
TO Standard (Low) Resolution 15.75K.
( 1-2 PLAYER GAME )
SEGA ENTERPRISES, INC. USA MANUALNO. 999-1517
e698
VISIT OUR WEBSITE!
@ SegaService.com =!
Back Forward Stop _ Refresh Home e ff : =& 2 AutoFill Print Mail |@ http://seuserviee.com/ @ macosx © Microsoft MacTopia © SegaService.com
\ Aosta
yaaeas \semones |
49pjoH @Beq \ yooqdesss \\
Sega Enterprises Inc., USA Service Department phone 415.701.6580 fax 415.701.6594
SEGA
Got Gun Problems 2S SERVICE
"Bulletins =Dari's Office "Game Manuals "Search “What's New
If you have any questions or comments about this site please E-Mail to Darl. Davidson@seu.sega.com
[what's new] [manuals] [bulletins] [assemblies] [Search] [staff] [Darl's office] [Return/Parts Policy] [warranty] [corporate info] [plugins] [Non-framed page]
You will need the following items to view this page in its entirety.
All Platforms Windows — Macintosh
@ internet zone
#PRODUCTION DATE@ This Product was produced in the year of: 2002
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety:
To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, ete. are used. Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the prod- Indicates that mishandling the product uct by disregarding this warning by disregarding this caution will cause will cause a potentially hazardous a slight hazardous situation which can
For the safe usage of the product, the following pictographs are used:
this display is attached to places where the Owner’s Manual and or Service Manual should
( Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment,
be referred to.
© Perform work in accordance with the instructions herein stated. Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should perform such work.
© Be sure to turn off power before working on the machine. To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always states to that effect.
© Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth is used). This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.
© Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
© Be sure to use fuses which meet the specified rating. (only for the machines which use fuses). Using fuses exceeding the specified rating can cause a fire and electric shock.
© Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated. SEGA shall not be held responsible for any accidents, compensation for damage to a third party, resulting from the specifications not designated by SEGA. © Ensure that the product meets the requirements of appropriate Electrical Specifications. Before installing the product, check for Electrical Specifications. SEGA products have a nameplate on which Electrical Specifications are described. Ensure that the product is compatible with the power supply voltage and frequency requirements of the location. Using any Electrical Specifications different from the designated Specifications can cause a fire and electric shock. © Install and operate the product in places where appropriate lighting is available, allowing warning labels to be clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the office herein stated. © When handling the Monitor, be very careful. (Applies only to the product w/monitor.) Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be performed only be those technical personnel who have knowledge of electricity and technical expertise. © __ Besure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.) Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers. © When transporting or reselling this product, be sure to attach this manual to the product. In the case where commercially available monitors and printers are used in this product, only the contents relating to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the specific Instruction Manual of such equipment.
° Descriptions herein contained may be subject to improvement changes without notice.
- The contents described herein are fully prepared with due care. However, should any question arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on power, check the following points to ensure that the product has been transported in a satisfactory status. Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are Casters and Adjusters, damaged? Do the power supply voltage and frequency requirements meet with those of the location? Are all wiring connectors correctly and securely connected? Unless connected in the correct direction, connector connections can not be made accurately. Do not insert connectors forcibly. C7 Do power cords have cuts and dents? 1 Do the fuses used meet specified rating? Is the Circuit Protector in an energized status? 0 Are all accessories available? 1 Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be firmly closed? oo000
Virtua Fighter 4 Evolution Sega Naomi 2 System Kit Contains List
Part # Desc Qty
840-0106D-01 ASSY CASE NET VF4EV USA 1
400-5397-01 SW REGU FOR JVS 1
560-5407-UL TRANSFORMER, 120V 17V2A 1
600-7009-2500 RGB CABLE 1
600-7141-250 CABLE JVS TYPE A-B 250CM 1
600-7158-0100 CA AUDIO RCA TO RCA 2CH 1
838-13616 AUDIO POWER AMP 1
838-13683-02 JAMMA 1/0 BD 1
999-1518 MARQUEE ART 1
999-1519 INSTRUCTION SHEET 1
999-1520 DECAL SIDE ART 2
999-1521 CONTROL PANEL 1
421-7988-91 STICKER SERIAL NUMBER 1
999-1517 KIT MANUAL -VF4 EVOLUTION 1
999-1515 INST. SHEET PLAYER 1
Parts not supplied in kit, but required for operation.
Suggested Happ # — Desc Qty
42-2093-00 6vde Coin Meter 1
Test Switch 1
Service Switch 1
5k Pot (for Volume Control) 1 50-7608-XX 8way JoyStick 2
58-9111-LXPLY SPST Momentary Switch (Start ) 2 58-91 XX-L SPST Momentary Switch (Punch) 2
58-91 XX-L SPST Momentary Switch (Kick) 2 58-91 XX-L SPST Momentary Switch (Defence) 2
VGA or NTSC RGB Monitor 1
DESIGNED RELATED PARTS
MARQUEE ART
999-1518
CTRL PNL OVERLAY
999-1521
SIDE ART
999-1520.
INSTR. SHEET (moves)
999-1519
INSTR. SHEET (player)
999-1515
Feb 9. 2000 (120 = m SERVICE BULLETIN 7-\ SEGA Service Department Attp://www.seuservice.com 45133 Industrial Drive Phone: 415.701.6580 J > =e Fremont, Ca. 94538 Fax: 415.701.6594
SPECIAL NOTICE FOR ALL SEGA NAOMI KITS
PROBLEM:
The SEGA Naomi Game kits are actually ‘JAMMA Dependent’. What this means exactly is they will only install into existing JAMMA Cabinets. If an operator tries to install these kits into a Non-JAMMA cabinet, they will first have to bring the wiring up to JAMMA Standards.
SOLUTION:
° Step 1 Disconnect the games original DC Power Supply. You may only use the power supply provided with your kit. Be sure to set the voltages going to your Game BD to 5.1 and 3.3 volts DC to assure proper operation ( Measure on Square Connector at Game BD. Yellow = 5vde / Brown = 3.3vde / White = Gnd ) Step 2. You MUST USE THE COIN METER SUPPLIED WITH YOUR KIT to assure proper Coin acceptance. A minimum 18 Gauge wire should be used from the Coin Meter | output line on your JAMMA Harness. The 5vdc ( Yellow ) wire found in the wiring bag of your kit MUST BE USED for the supply voltage to the meter.
Not following the directions provided herein may cause your game to malfunction. All electrical work should be performed by the site’s Serviceman or Technician.
e In order to prevent an electric shock and short circuit, be sure to turn power off before performing work or touching the interior parts of the product. e Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circuit accident.
If you have any questions please contact the SEGA Service Department at the numbers given above. \N AF
INSTALLATION INSTRUCTIONS
- Turn off power and unplug machine. Open all access panels. Locate the original game Power Supply, Game BD, I/O BD, Sound BD etc... Remove these items from your cabinet. Remove all artwork from cabinet. Clean Cabinet Exterior and repair as necessary to assure good appearance.
- Remove all existing harnesses. Install a new JAMMA Harness (Recommended). Please
- Install the Components supplied in your kit (Game BD, Power Supply, Amp, Transformer etc.). Follow the wiring diagram for proper electrical connection (located at the end of the kit manual). Be careful to fasten all components securely. Route wires in a manner not to allow for pinching or binding. Secure wires once connected.
Vacuum out or clean bottom of cabinet of dirt & miscellaneous parts (e.g. screws, loose coins / tokens, etc.). good ideas
al Remove all exterior decals and repair any cabinet damage. Repaint Good idea cabinet if necessary. Remove the Monitor Plexi or if your game plexi has Silk-screened artwork, you will need to strip it off.
- Connect your cabinet’s existing Service Switch Bracket Assy to the Kit Harness (Follow Diagram). Please note that you MUST USE a COIN METER for the game system to properly accept coins (Refer to Diagrams and Service Bulletin included in this manual).
- Remove all Joystick Buttons and Pushbuttons from your Control Panel. Remove the existing overlay. Clean off all glue residues, and fill in or plug existing holes to give you a blank work area for your new game.
- Install your Control Panel Art supplied with the kit. Cut holes in the overlay where controls are to be installed. Install and connect your controls. Please note that Joysticks and Pushbuttons are NOT SUPPLIED with your kit. You will need to supply 2ea 8way Joysticks, 2ea Start Buttons, and 2ea Punch, Kick and Defense buttons.
- Connect your Coin Switches to the game harness following the diagram in the back of the manual.
- Turn on Power to the game and check for proper voltages on either connector entering the Game BD Filter BD. The proper voltages are: 5.lvde between Yellow and White, 3.30vde between Brown and White. Adjust where necessary. Adjustment can be made at the Power Supply by using an insulated flat screwdriver. Turn clockwise to increase. Turn counter-clockwise to decrease.
INSTALLATION INSTRUCTIONS
- Finish installation by installing Side Decals, Marquee and any instruction decals. Play your machine to verify proper operation. Set up options as desired.
Adjust the SIZE, CONTRAST, BRIGHTNESS, and COLORS on the 1 Monitor for optimum appearance. Adjust VERTICAL/HORIZONTAL Good \dea, Hold to get a stable picture, if required.
Enter DIAGNOSTICS and adjust the Volume Level, test all Buttons & J \dea! Joystick for proper operation & wiring. Adjust Pricing. Coin-Up and Goo test out a game to ensure proper play functions are as they should be.
Sega Naomi System Switch Bracket and Speaker Installation Diagrams
(Figure 3)
To CN1 of Amplifier Board Pin1 ——_ JAMMA Pin 8
Pin 4 ———+ Yellow Wire from Extra Harness (+5v) Pin5
= +
a : a a rn Coin Meter eS) a — Wu} oO ~ ols Test Service
-——* JAMMA Pin R Volume -——e° JAMMA Pin 1 *® JAMMA Pin 15
GRY/RED _| From CN2 of Left Amplifier Board ORG/RED Speaker
GRY/BLUE 4 From CN4 of Right Amplifier Board ORG/BLUE Speaker
Sega Naomi System JAMMA Harness Wiring
(JAMMA I/O BD)
(Figure 4)
Ground 1/A Ground
Ground 2/8 Ground
+5v (Not Used) 3), C +5v (Not Used)
+5v (Not Used) 4/D +5v (Not Used)
(Not Used) 5) E (Not Used)
+12v (Not Used) 6] F +12v (Not Used)
Key 7/)H Key
Coin Meter 1 8] J Coin Meter 2
(Not Used} 91K (Not Used)
(Not Used). 10} L (Not Used)
(Not Used) 11) M (Not Used)
Video Red 12) N Video Green
Video Blue: 13] P Video Sync
Video Ground: 14] R Service Test. 15|S (Not Used)
Coin 1 16) T Coin 2
1P Start 17] uU 2P Start
1P UP 18] V 2P UP
1P Down 19) W 2P Down
1P Left 20] X 2P Left
1P Right 21) Y 2P Right
Attack 1P (1P SW1) 22| Zz Attack 2P (2P SW1)
Grapple 1P (1P SW2). 23} a Grapple 2P (2P SW2)
Support 1P (1P SW3). 241 b Support 2P (2P SW3)
(Not Used). 25) c¢ (Not Used)
(Not Used) 26|d (Not Used)
Ground 27|e Ground
Ground 28 | f Ground
Sega Naomi System Filter Board Information Connector Description etc
Connector Description etc.
Service Switch Psw2 PSW1 —DIPSW1 fo] (©) [away
[cn2] [cn7] Test 3 | ele e]o]o]o Switch © © Co io] alo o}o}o}o / :
Preamp Level VGA Level Power Connectors Audio Out Video Out
- “7 . “> a
7 N 7 N a N ¢ N a N 4 XN / 1 2 3 4 \ / \ / \ Setting for High \ Resolution 31KHZ \ 1-4 off \ \ i}
1 2 3 !
Setting for Standard I Resolution 145KHZ / \ 1 on 2-4 off. 7 \ / \ / N 7 \ 7 \ a ee ae ae ed a
- HANDLING PRECAUTIONS
nN @ To prevent electric shock or IC Board malfunctioning, be sure to turn off
s = the power for the cabinet when installing or removing the IC Board.
(0?) Be sure to connect the IC Board and connectors completely. Insufficient
insertion can damage IC Board, etc.
@ Concerning the display of JAMMA VIDEO STANDARD: JAMMA VIDEO STANDARD adopted by NAOMI 2 is referred to as JVS. As against this Standard, the conventional JAMMA STANDARD which employs 56P Edge Connectors adopted by ST-V, etc. is displayed as Old JAMMA STANDARD. The specific Manual attached to each game sometimes displays JVS as JV STANDARD, New JAMMA STANDARD, or JAMMA 2 STANDARD against OLD JAMMA STANDARD as JAMMA STANDARD, JS, etc.
@ The contents herein described are subject to change without notice.
- SPECIFICATIONS
@ ON-SCREEN DISPLAY
Monitor Position
HORIZONTAL Horizontal Synchronous Frequency
31/15 kHz
@ CONTROL PANEL
us KICK START oe PUNCH
fe) KIA O
L DEFENSE (GUARD)
ll www.seuservice.com
- GAME DESCRIPTION
3 - 1 OUTLINE OF THE GAME
@ You, as a martial art fighter, play in a tournament.
@ For one-person match, you operate a playing character to fight against an opponent computeroperated character (CPU).
@ For person-vs-person match, two players operate each playing character to fight against each other.
@ The playing characters covers 15 selectable regular characters and | boss character.
3 - 2 PLAYING PROCEDURE
@ Total 15 characters are available. Out of them you select one character to start the game.
@ Ateach stage you play a match against a computer-operated character.
@ Winning a match + Each match consists of multiple rounds. You win a match when the number of your gained rounds reaches a preset value. + When you win a match at any stage, you can proceed to a next stage and play a match against a new computer-operated character.
@ Gaining a round You can gain a round when either of the following events occurs.
- You successfully reduce the opponent's energy to 0 (zero). + Your energy remains much more than the opponent's energy when the limit time has become 0 (zero).
- You turn the opponent out of the ring. When you and the opponent have drawn (that is, at the end of a round, both have a same level of energy or have knocked each other at the same time), both can gain the round exceptionally. When you and the opponent have drawn under a sudden death state (that is, the number of the gained rounds is equal to each other and either can win the match by obtaining one more round), either with more energy becomes a winner of the match.
@ When the GAME becomes OVER The game is over when either of the following events occurs.
- You lose a match against a computer-operated character.
- You finish all the 11 stages: 10 stages, each with a regular computer-operated character, and 1 stage with a boss computer-operated character.
@ Continuing the game You can continue the game as follows. + When you lose a match, the CONTINUE screen appears.
- Insert the credit coins before the limit time is counted down to 0 (zero) on the CONTINUE screen, and press the start button. Then, you can continue the game (or resume the first round of the stage where you lost a match).
3 -3 CHARACTER SELECT SCREEN
@ You select one out of the 15 available characters.
@ Each character indicates its name, figure and profile.
@ Place the lever in an upper, lower, left, or right position to migrate from character to character, and press either of the punch, kick, and defense buttons to select a character.
@ Hold down the start button and press either of the punch, kick, and defense buttons to toggle between 1P character's color and 2P character's color.
3 - 4 GAME-PLAYING SCREEN
Limited Time of the Round
1P Energy G: The round ends when the time ergy Gauge is counted down to 0. Reduced when damaged. The round ends when the gauge reads 0. 2? Energy Gauge
You win if you obtain all the rounds. Obtained Rounds of 1P
1P Character 2P Character
3 - 5 BASIC OPERATIONS OF THE CONTROLS
The following explains the operation for a 1P character. For a 2P character, read right and left reverse.
The following abbreviations are used herein. P: Punch button
K: Kick button
G: Defense (Guard) button
+ Operating the two or more controls at the same time
- P: Punching attack
- K: Kicking attack
- G Defending upper and middle parts + Lever in a lower position + G: Defending lower part (Note: The opponent may attack you at your upper, middle, or lower part. You must defend your upper, middle, or lower part accordingly.) + Lever in a right position: Moving forwards + Lever in a left position: Moving backwards + Lever in an upper position instantly: Dodging away from you + Lever in a lower position instantly: Dodging toward you
- PorK + lever in an upper position: Jumping upwards
- PorK + lever in an upper right position: Jumping diagonally forwards + PorK + lever in an upper left position: Jumping diagonally backwards + Lever in a right position two times quickly: Dashing forwards + Lever in a left position two times quickly: Dashing backwards + Lever in a lower right position two times quickly: Crouching and dashing forwards + Lever in a lower left position: two times quickly: Crouching and dashing backwards + Lever held in a lower position: Crouching + P+G when you are close to the opponent: Throwing + P+G when the opponent is throwing you: Escaping the throw (slipping) + Lever in an upper position + P for the downed opponent: Jumping and attacking the downed opponent + Repeated G when you are downed: Standing up quickly + Repeated K when you are downed: Kicking attack immediately after quickly standing up
- Lever in a left position + repeated G when you are downed: Rolling backwards and standing up + Lever in an upper/down position + repeated G when you are downed: Rolling left/right and standing up
- Continuously operated lever in a left/right position when you are faltering: Unfaltering quickly
3 - 6 SPECIAL OPERATIONS OF THE CONTROLS
Dodging/Attacking Immediately after surely dodging by a lever operation, you attack an opponent. Thus you can use the combination of dodging/attacking skills.
Lever in an upper position instantly + P + K + G: Dodging away from you and attacking Lever in a lower position instantly + P + K + G: Dodging toward you and attacking
Recovery (Ukemi = safe ways of falling down) The ukemi enables you to regain your balance just when landing and to immediately attack an opponent. This skill lessens damage to you. Thus you can escape from the crunch and rather earn a chance to counterattack. You may be just downed or use the ukemi, whichever is tactically desirable in each situation.
P+K+G immediately before you are downed: Ukemi
Charge Attack (attacking with the accumulated energy) Using the energy accumulated for a little time, you can destroy an opponent's defenses. This high-risk, high-return skill enhances your tactical capabilities. Special commands, one each with a character, are available to activate this function.
Fighting by the walls + You may damage and destroy the walls. Thereby you can change the state of the ring as tactically required.
- The opponent may falter when you throw him/her against the walls. This enables you to use the combination (Combo) skills.
3 - 7 PERSON-VS-PERSON (VS) MATCHS
Anew player may join you in playing the GAME or selecting a character. As a result the system suspends the current one-person match against a computer-operated character and starts a person-vs-person match.
The new player must insert the credit coins before joining. After playing the person-vs-person match only the winner can continue to play the suspended match: one-person match against a computer-operated character. He/she resumes the first round of the suspended match.
PERSON-VS-PERSON (VS) MATCHS * CHARACTER SELECT SCREEN
When you have set the STAGE item to RANDOM on the GAME ASSIGNMENTS screen, the built-in computer (CPU) randomly selects a stage. When you have set the STAGE item to SELECTIVE on the GAME ASSIGNMENTS screen, the newly joined player selects a stage. (For more information see the chapter 4, B, b. "GAME ASSIGNMENTS..") To select, he/she places the lever in an upper, lower, left, or right position to migrate from stage to stage, and presses either of the punch, kick, and defense buttons.
PERSON-VS-PERSON (VS) MATCHS * STAGE SELECT SCREEN
- TEST MODE
A. SYSTEM MENU
Go)
IMPORTANT!
When settings are changed in SYSTEM ASSIGNMENTS, COIN ASSIGNMENTS, and GAME ASSIGNMENTS of GAME TEST MODE, be sure to exit from the test mode of SYSTEM MENU screen. The contents of setting changes are stored in the IC on the BOARD when exiting from the Test Mode. If the power is turned off in the Test Mode (before exiting), the contents of setting changes are ineffective. In this case, the settings remain unchanged.
This test mode mainly allows the IC Board to be checked for accurate functioning, monitor color to be adjusted as well as COIN ASSIGNMENTS and GAME ASSIGNMENTS to be adjusted.
- Connect the power, and press the TEST Button. Then the following SYSTEM MENU screen
PRESS TEST BUTTON appears.
For the SYSTEM ASSIGNMENTS, do not change the following default settings: CABINET TYPE: 2 PLAYER(S) 7 MONITOR TYPE: HORIZONTAL SYSTEM MENU SERVICE TYPE: COMMON
eee For the COIN ASSIGNMENTS, set as follows:
SOUND TEST COIN CHUTE TYPE: COMMON | CRT.TEST COIN/CREDIT SET TING: at discretion SYSTEM ASSIGNMENTS: SEQUENCE: at discretion COIN ASSIGNMENTS =< @ Out of the COIN ASSIGNMENTS items, the SEQUENCE # BOOKKEEPING items means as follows: BACKUP DATA CLEAR SEQUENCE The number of credits required for starting the CLOCK SETTING game SEQUENCE 2: The number of credits required for continuing the ROM BOARD TEST game GAME TEST MODE SEQUENCE 3 to 8: Not Used [XXXXXXXXX ] BOOKKEEPING 2/2 means as follows: > EXIT L_ @P! SEQ 1: Play frequency of Player 1 P2 SEQ 2: Frequency of CONTINUE by Player 1 SELECT WITH SERVICE BUTTON P3 SEQ 3-8: Not Used AND
- Press the SERVICE Button to move the -> mark to any desired item, and press the TEST Button.
- Press the SERVICE Button to move the -> mark to GAME TEST MODE item, and press the TEST Button. Then the GAME TEST MENU screen appears that enables to test the items specific to this game. For the details, see the following pages.
- After testing, select the EXIT and press the TEST Button. The game advertising screen reappears.
B. GAME TEST MODE
Press the SERVICE Button to move the arrow mark to the GAME TEST MODE item on the SYSTEM MENU screen, and press the TEST Button. The GAME TEST MENU screen, specific for this game, opens. Press the SERVICE Button to move the arrow mark to a desired test item on the GAME TEST MENU screen, and press the TEST Button to open the related screen. After testing, move the arrow mark to the EXIT item and press the TEST Button. The SYSTEM MENU screen reappears
VF4 EVOLUTION GAME TEST MENU
-> INPUT TEST GAME ASSIGNMENTS 1P ARRIVAL STAGE CHARA DATA TOTAL DATA VS DIAGRAM GAME BOOKKEEPING BACKUP DATA CLEAR
EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
GAME TEST MENU Screen
a. INPUT TEST
This test displays the state of each switch and button. If the switch goes ON when the switch/button is pressed, it is satisfactory. Press SERVICE Button and TEST Button simultaneously to have the MENU return on to the screen.
INPUT TEST
PLAYER 1P 2P
START OFF OFF UP OFF OFF DOWN OFF OFF LEFT OFF OFF RIGHT OFF OFF
GUARD OFF OFF PUNCH OFF OFF KICK OFF OFF
TEST OFF SERVICE OFF
IPRESS SERVICE+TEST BUTTON TO EXIT
INPUT TEST Screen
UP KICK
START t O
7 OPUNCH LEFTE—@— RIGHT Ny O DEFENSE (GUARD)
DOWN
CONTROL PANEL
b. GAME ASSIGNMENTS
Allows game difficulty adjustments, time setting, etc. to be changed. Move the arrow to the desired item by SERVICE Button and press the TEST Button to change the setting. Select EXIT to return to the MENU screen.
GAME ASSIGNMENTS
ENEMY LEVEL NORMAL ENERGY MAX(IP) 200 ENERGY MAX(VS) 200 MATCH COUNT(IP) 2 MATCH COUNT(VS) 2 TIME LIMIT 30
STAGE SELECT RANDOM CONTINUE ON VS FINISH OFF
RETURN TO DEFAULT SETTING -> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
GAME ASSIGNMENTS Screen
@ ENEMY LEVEL:
@ ENERGY MAX (IP):
@ ENERGY MAX (VS):
@ MATCH COUNT (IP):
@ MATCH COUNT (VS):
@ TIME LIMIT:
@ STAGE SELECT:
@ CONTINUE:
@ VS FINISH: Sets the difficulty level of the one-person match. VERY EASYEASY~NORMAL~HARD~>VERY HARD (Default: NORMAL)
Sets the energy (initial value) in a one-person game. 180-+200-+220-4240 (Default: 200)
Sets the energy (initial value) in a person-vs-person game. 180-+200-+220-4240 (Default: 200)
Sets the number of the rounds that a player aims to gain for winning the related match in a one-person game. 2434-5 (Default: 2)
Sets the number of the rounds that a player aims to gain for winning the related match in a person-vs-person game. 2434-5 (Default: 2)
Sets the limit time of a match. 30-45-60 (Default: 30)
Sets the method of selecting a stage in a person-vs-person game. RANDOM indicates an automatic selection by the computer. RANDOM~SELECTIVE (Default: RANDOM)
Determines whether you can continue to play the lost match in a one-person game. ON indicates that you can play the lost match. ON-OFF (Default: ON)
Determines whether to finish the game after you have successfully played the matches. The *WIN settings indicate that the game is finished for both the players after you have won consecutively * times (Note that the * mark is equal to 1 up to 10 or the number of winning matches as below). These settings are prepared for some competitions or events. Usually, therefore, set this item to OFF. OFF 1 WIN-2 WINS-3 WINS—4 WINS~+5 WINS 6 WINS +7 WINS~*8 WINS~9 WINS-+10 WINS (Default: OFF)
@ RETURN TO DEFAULT SETTING: Resets all the GAME ASSIGNMENTS items to the
@ EXIT: default values.
Returns to the GAME TEST MENU screen.
c. IP ARRIVAL STAGE
Lists the playing statistics by difficulty level.
ARRIVAL STAGE 1/5
1P GAME STAGE RECORDS
VERY EASY
TOTAL 1COIN #1 0 0 #2 0 0 #3 0 0 #4 0 0 #5 0 0 #6 0 0 #7 0 0 #8 0 0 #9 0 0 #10 0 0 #11 0 cv)
PRESS TEST BUTTON TO CONTINUE
1P ARRIVAL STAGE 1/5 Screen
@ ARRIVAL STAGE 1/5: Indicates that the statistics is fora VERY EASY level of one-person game.
@ ICOIN: Indicates how many times each stage has been reached in a VERY EASY level of one-person game, excluding the number of continuing.
@ TOTAL: Indicates how many times each stage has been reached in a VERY EASY level of one-person game, including the number of continuing.
Press the TEST Button to open the next screen. Press the TEST Button on the last 5/5 screen to return to the GAME TEST MENU screen.
@ARRIVAL STAGE 2/5: _ Indicates the similar statistics in an EASY level. @ARRIVAL STAGE 3/5: _ Indicates the similar statistics in a NORMAL level. @ARRIVAL STAGE 4/5: _ Indicates the similar statistics in a HARD level. @ARRIVAL STAGE 5/5: _ Indicates the similar statistics ina VERY HARD level.
d. CHARA DATA
Lists the playing statistics by character. The following 1/15 screen is the example for the character named Akira.
CHARA DATA 1/15
AKIRA
MAX COMBO. MAX DAMAGE
MAX WALL COMBO
PRESS TEST BUTT¢ MAX WALL DAMAGE 0
IN TO CONTINUE PRESS SERVICE+TEST BUTTON TO EXIT
CHARA DATA 1/15 Screen
@MAX COMBO:
@MAX DAMAGE:
@MAX WALL COMBO:
@MAX WALL DAMAGE: Indicates the maximum number of the combos without walls.
Indicates the maximum damages without walls.
Indicates the maximum number of the combos with walls.
Indicates the maximum damages with walls.
Press the TEST Button to open the next screen. Press the TEST Button on the last 15/15 screen to return to the GAME TEST MENU screen. Press the TEST and SERVICE Buttons simultaneously to directly return to the GAME TEST MENU screen.
@CHARA DATA 2/15 SARAH:
@CHARA DATA 3/15 LAU:
@CHARA DATA 4/15 SHUN:
@CHARA DATA 5/15 JEFFRY:
@CHARA DATA 6/15 PAT:
@CHARA DATA 7/15 JACKY:
@CHARA DATA 8/15 KAGE:
@CHARA DATA 9/15 LION:
@CHARA DATA 10/15 WOLF:
@CHARA DATA 11/15 AOI:
@CHARA DATA 12/15 LEIFEI:
@CHARA DATA 13/15 VANESSA:
@CHARA DATA 14/15 GOH:
@CHARA DATA 14/15 BRAD: Indicates the similar statistics on Sarah.
Indicates the similar statistics on Lau.
Indicates the similar statistics on Shun.
Indicates the similar statistics on Jeffry.
Indicates the similar statistics on Pai.
Indicates the similar statistics on Jacky.
Indicates the similar statistics on Kage.
Indicates the similar statistics on Lion.
Indicates the similar statistics on Wolf.
Indicates the similar statistics on Aoi.
Indicates the similar statistics on Lei Fei.
Indicates the similar statistics on Vanessa.
Indicates the similar statistics on Goh.
Indicates the similar statistics on Brad.
e. TOTAL DATA
Lists the entire statistics by character.
TOTAL DATA 1/1
SERIES OF WINS WINS OF CHARA
1ST 20 AKIRA AKIRA 0 2ND 20 SARAH SARAH 0 3RD 20 LAU LAU 0 4TH 20 SHUN SHUN 0 5TH 19 JEFFRY JEFFRY 0 6TH 19 PAI PAI 0 7TH 19 JACKY JACKY 0 8TH 18 KAGE KAGE 0 9TH 18 LEIFEI LION 0 10TH 18 AOI WOLF 0 AOI 0 LEIFEI 0 VANESSA 0 GOH 0 BRAD 0
PRESS TEST BUTTON TO EXIT
TOTAL DATA Screen
@ SERIES OF WINS: _ Indicates the number of the consecutive winnings for each character.
@ WINS OF CHARA: _ Indicates the accumulated number of the winnings for each character.
Press the TEST Button to return to the GAME TEST MENU screen.
f. VS DIAGRAM
Illustrates a matching diagram.
VS DIAGRAM
AKI | | | | |AKISAR|LAU|SHNUJEF|PAIJ AK|KAG|LIO|WOL|AOILEI|VAN|GOH|BRD|
PRESS TEST BUTTON TO EXIT
VS DIAGRAM Screen
The percentage of wins is indicated on the second rightmost column of the screen. The order of wins percentage is indicated on the rightmost column of the screen. Press the TEST Button to return to the GAME TEST MENU screen.
Abbreviations on the Screen for the Character Names Abbreviations: Character Names AKI: SAR: LAU: SHN: JEF: PAI: JAK: KAG: LIO: WOL: AOI: LEI: VAN: GOH: BRD: AKIRA SARAH LAU SHUN JEFFRY PAI JACKY KAGE LION WOLF AOI LEI FEI VANESSA GOH BRAD
g. GAME BOOKKEEPING
Indicates the overall statistics. Three screens are available. Press the TEST Button to migrate from one screen to another. Press the TEST Button on the third screen to return to the GAME TEST MENU screen.
GAME BOOKKEEPING 1/4
NUMBER OF GAMES 0 1P GAMES 0 VS GAMES 0
NUMBER OF CONTINUE 0
CHALLENGE/PARTICIPATION 0
TOTAL TIME 0D 0H 0M 0S TOTAL PLAY TIME 0D 0H 0M 0S
ALL AVERAGE PLAY TIME 0H 0M 0S 1P AVERAGE PLAY TIME 0H 0M 0S 1P LONGEST PLAY TIME 0H 0M 0S 1P SHORTEST PLAY TIME 0H 0M 0S VS AVERAGE PLAY TIME 0H 0M 0S VS LONGEST PLAY TIME 0H 0M 0S VS SHORTEST PLAY TIME 0H 0M 0S
OPERATING RATIO 0.0%
PRESS TEST BUTTON TO CONTINUE
GAME BOOKKEEPING (1/4) Screen
@NUMBER OF GAMES:
@1P GAMES:
@VS GAMES:
@NUMBER OF CONTINUE:
@CHALLENGE/PARTICIPATION:
@TOTAL TIME:
@TOTAL PLAY TIME:
@ALL AVERAGE PLAY TIME:
@ |P AVERAGE PLAY TIME:
@ |P LONGEST PLAY TIME:
@ |P SHORTEST PLAY TIME:
@ VS AVERAGE PLAY TIME:
@ VS LONGEST PLAY TIME:
@ VS SHORTEST PLAY TIME:
@ OPERATING RATIO: The total number of the games played The number of the one-person games played The number of the person-vs-person games played The number of accumulated continuing-times
The number of accumulated joining-times
The accumulated power-up time period
The accumulated playing time period
The averaged playing time period (one-person + person-vs-person)
The averaged playing time period (one-person)
The longest playing time period (one-person)
The shortest playing time period (one-person)
The averaged playing time period (person-vs-person)
The longest playing time period (person-vs-person)
The shortest playing time period (person-vs-person)
TOTAL PLAY TIME/TOTAL TIME (%)
GAME BOOKKEEPING 2/4
USAGE OF CHARACTERS.
1P CHARACTERS 2P CHARACTERS
AKIRA 0 AKIRA 0 SARAH 0 SARAH 0 LAU 0 LAU 0 SHUN 0 SHUN 0 JEFFRY 0 JEFFRY 0 PAI 0 PAI 0 JACKY 0 JACKY 0 KAGE 0 KAGE 0 LION 0 LION 0
WOLF 0 WOLF 0
AOI 0 AOI 0 LEIFEI 0 LEIFEI 0 VANESSA 0 VANESSA 0 GOH 0 GOH 0 BRAD 0 BRAD 0
PRESS TEST BUTTON TO CONTINUE
GAME BOOKKEEPING (2/4) Screen
Indicates how many times each character (for 1P and 2P) has been used.
GAME BOOKKEEPING 3/4
USAGE OF STAGE
COLOSSEUM CITY CASTLE AQUARIUM TEMPLE ISLAND HANGAR GYMNASIUM GARDEN HARBOR CAVE SHRINE ARENA GREAT WALL eoeooocooosecoSes
PRESS TEST BUTTON TO CONTINUE
GAME BOOKKEEPING (3/4) Screen
Indicates how many times each stage has been used with the STAGE item set to SELECTIVE.
GAME BOOKKEEPING 4/4
|1P |2P |TOTAL | COIN | SERVICE | TOTAL DAY | COIN | COIN | COIN | CREDIT | CREDIT | CREDIT
2002-06-12 20 - 20 2002-06-13 20 - 21 2002-06-14 24 24
PRESS TEST BUTTON TO EXIT
GAME BOOKKEEPING (4/4) Screen
Shows income information for a 30-day period. A new day starts at 24:00 (midnight). This function uses the internal clock, so ensure that the clock is set to the correct time using CLOCK SETTING in SYSTEM TEST MODE. Income data is saved to memory at fixed times (during advertising, saving takes place while the Sega logo is displayed). Note that turning the power off or entering Test Mode before data save is complete will prevent data from being recorded.
h. BACKUP DATA CLEAR
Clears the backup data from the screen.
BACKUP DATA CLEAR
YES
-> NO(CANCEL)
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
@YES: Opens the BACKUP DATA CLEAR - COMPLETED screen for clearing the following data. (The other data are not cleared.) 1P ARRIVAL STAGE CHARA DATA TOTAL DATA VS DIAGRAM GAME BOOKKEEPING
@NO: Returns to the GAME TEST MENU screen.
BACKUP DATA CLEAR
COMPLETED
PRESS TEST BUTTON TO EXIT
After clearing the backup data, the COMPLETED message appears. Press the TEST Button to return to the GAME TEST MENU screen.
GAME BOARD
nN @ Do not expose the Game Board so as to avoid causing an accident or
malfunctioning.
PART NO. DESCRIPTION
ASSY CASE (M+ ®) 840-0106D-01 ASSY CASE NAT VF4EV USA :USA
ASSY CASE NAOMI 2 840-0046A-01 ASSY CASE NAOMI 2 MAIN BD USA :USA MAIN BOARD (Not sold separately)
® ROM CASE 840-0106C ROM CASE NAT VF4EV (Not sold separately)
A : B c D L I FE
‘TRANSFORMER
ne ao
120 Vac Input FAlso
[Extra
1234 v > Cov 7
ov ust a
s6o-s4o7 Fa
[GD ROM DRIVE]
838-13616
AUDIO POWER AMP 2CH
- 3V12A,
To Extra
Yellow Wire
CONTROL, SANE To PIN 8 of Jamma sna CONNECTIONS USED ARE:
= VIDEO OUT > SWITCH INPUTS. > SWITCH GROUND RETURNS. ee COIN COUNTER OUTPUT.
© L6-E89EL- Bes J 600-6743-050 Speaker Outputs vo~ /o-Cg 000-098
aa
APR) NAOMI KIT UNIVERSAL WIRING DIAGRAM (1/1)
T
Notes:
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.
Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.
SEGA ENTERPRISES, INC. (USA)
45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax