CATHODE RAY TOMES

Dig Dug (Tech Notes Ram Tests)

Dig Dug (mini arcade) (Basic Fun, 2018) · Document · 4 pages · original scan

Page 1

RAM TESTS ADDRESS 8000 - A000

Bytes = 1K DBUS = Addres R/W = Write Game Tester = Game

Checksum = OFF

Select Address 8000 Display Reads 8000 R/W mode to pulse then off (Char Ram 0)9M/2016

R/W mode to pulse then off Address signature displays Reads 8400 (If problem-trouble shoot) _ {If correct-go on) R/W = Write R/W mode to pulse then off (Char RAM 0) 9M/2016 R/W Read R/W mode to pulse then off Display Reads 8800 (If correct go on - If problem - troubleshoot) R/W = Write R/W mode to pulse then off (obi RAM) 93/K, 9E/F 2114

R/W mode to pulse then off Display Reads 8200 (If correct go on - If problem - troubleshoot) R/W = Write R/W mode to pulse then off

R/W mode to pulse then off Display reads 9000 (If correct go on - If problem - torubleshoot) R/W = Write R/W mode to pulse then off (POS RAM) R/W = Read 9H, QH/J - 2114 R/W mode to pulse then off Display Reads 9400 (If correct go on - If problem troubleshoot) R/W = Write R/W mode to pulse then off

R/W mode to pulse then off Display Reads 9800 (If correct go on - If problem - troubleshoot) R/W = Write R/W mode to pulse then off (Flip RAM) R/W = Read 9G/H, 9 F/G = 2114 R/W mode to pulse the off Display Reads 9C00 R/W = Write R/W mode to pulse then off

R/W mode to pulse then off Display Reads A000 End at RAM Test

Page 2

_ROM TEST ADDRESS 0000 - 3000

R/W = end Game/Tester = Game Bytes = 256 DBUS Source = Data Checksum = ON Select Address - 0000 ROMO 61 R/W mode to pulse then off Display Reads : Od.4b. - 04 Select Address - 1000 R/W mode to pulse then off Display Reads : 1688-04 Select Address - 2000 ROM 2 6 N/P R/W mode to pylse then off Display Reads: 7910 - 04 Select Address 3000 ROM 3 6R R/W mode to pylse then off Display Reads: b/8A.A. - 04

Remove Processor clip off priority 1 Place on priority 2 Processor Hit tester reset, display should read - 0000-00

Select Address - 0000 ROM 4 = 6C R/W mode to pylse then off Display Reads: b.F.02-04 Select Address - 1000 ROM 5 6D R/W mode to pulse then off Display Reads: £.3E.1-04

Checksum = Off

R/W = Write Error data display = Game Bytes = 1024 DBUS = Address Select Address - 8000 R/W mode to pulse then off 3 times

This test allows me to see that the 2nd priority Bus Controller and Address Buffers are working. All alphanumerics and charactors should be displayed in order on the screen (8D, 6G, 7F and 7D)

Remove Processor clip from 2nd priority, place on 3rd priority processor.

Page 3

Error data display = Game Bytes = 256 DBUS source = Data Checksum = On Select Address - 0000 ROM 6 5L R/W mode to pulse then off Display Reads: 9F.A.A. - 04

Checksum = Off

R/W = Write Error data display = Game Bytes = 1024 DBUS Source = Address elect Address - 8000 R/\l mode to pulse then off 3 times

This test allows you to see that the 3rd priority Bus Controller and address buffer are working.

Ail alphnumerics are displayed in order on the screen. (8d, 7M, 7K/L and 4H)

Select8000FFiK
mi8400FF1K
"8800FF1K
*8C00FFik
"9000FF1K
"9400FF1K
"9800FF1K
"9c00FF1K
SelectAc0O601 BYTE5 M/N Pin 4 = 0 Clears cross Hatch
01"4 = 1 Cross Hatch
SelectAOOL00"5=0
01i.5=1
SelectA00200i6=0
o1.6=1
SelectA00300‘7 = 0 Enables screen
91”7 = 1 Blanks screen
SelectA004oe1"3 - : Changes sand color
SelectA005ooi10 7 Changes sand color
SelectA00600"11 = Not used
01"11 = Not used
SelectA00700"12 = 0 Flip
01iW12 = 1 Inverts Picture
Page 4

R/W = Write Error data = Game BYTES = 1K BUS = Address Tester mode = R/W Select Address = 8000 R/W mode to pulse then

R/W mode to pulse then R/W = Write R/W mode to pulse then

R/W mode to pulse then R/W = Write R/# mode to pulse then R/W = Read 8C00 R/W mode to pulse then R/W = Write R/W mode to pulse then

R/W mode to pulse then R/H = Write R/W mode to pulse then VIDEO PLAYFIELD TEST

off

off

off

off

off

off

off

off

off R/W mode to pulse then off R/W = Write R/W mode to pulse then off

R/W mode to pulse then off R/W = Write R/W mode to pulse then off R/W = Read 9C00 R/W mode to pulse then off R/W = Write R/W mode to pulse then off R/W = Read A000 R/W mode to pulse then off R/W = Write R/W mode to pulse then off

Set up Sig Tester mode = Sig Start to UBLANK Stop UBLANK Clock can very to 6 mgz +5 = PACU gnd = 0000