The Real Ghostbusters Operation and Service Manual (780-0070-00)
The Real Ghostbusters (US 2 Players, revision 2) (Data East USA, 1987) · Manual · 15 pages · 4 sections · original scan
THE REAL
GH2@STBUSTERS
OPERATION & SERVICE MANUAL
470 NEEDLES DRIVE 786-0070-06
WARNING
This equipment generates and uses radio frequency energy and if not installed and used properly, i.e., in strict accordance with the instructions manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device persuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.
Federal law provides severe civil and criminal penalties for the unauthorized reproduction, distribution, or exhibition of copyrighted audiovisual works and video games.
The Federal Bureau of Investigation
investigates allegations of criminal copyright infringement.
—————$$ | THE REAL GHOSTBUSTERS 7 | eee
SERVICE & OPERATION MANUAL
TABLE OF CONTENTS
GENERAL INFORMATION
instal lation. and-Sat-Up. «ovcieucs cee cnstepeadecsee es
GAME INFORMATION
HOM 6 PRY oes wynraais negremir ans o'9les'sinis oe ohprice, ole Wile bialo wie
Game Options... Beem e wwe cence cere eeeceeceeee
System Adjustments... csccsccccccvevevsceccece
Wiring Diagram....
REPLACEMENT PARTS LIST
Fine), AgseewlY sc... cesses 0s cx unis sng vie Qesecieshte nese.
Control Pande. occsinweiee sea vive osianin ds cimedy celtics etsleeee
Power Supply....
N1S0.. Patt iisieis «0.04 geemw iis tows s sia’
© 1987 DATA EAST USA, INC. 470 NEEDLES DRIVE SAN JOSE, CA. 95112 (408) 286-7074
FIRST PRINTING OCTOBER 1987
PN: 780-0070-00
FCC WARNING
This equipment generates and uses radio frequency energy and if not installed and used properly, ie., in strict accordance with this instructions manual, may cause harmful interference to radio connunications. This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of the FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environaent.
Operation of this equipment ina residential environgent is likely to cause interference in which case the user, at his own expense, will be required to take whatever measures are necessary to correct the interference.
ENVIRONMENTAL DATA
This product is intended for indoor use only, power tequirenents are 105-125 volts AC S0-60 hz, and requires a 3 wire grounded outlet.
FBI WARNING
Federal law, provides severe civil and cripinal penalties for the unauthorized reproduction, distribution, or exhibition of copyrighted audiovisual works and video games. The Federal _ Bureau of Investigation investigates allegations of criainal copyright infringement.
COPYRIGHT NOTICE
The Real Ghostbusters™ is Copyright 1984 Columbia Pictures Industries, Inc. Copyright 1986 Colusbia Pictures Television, a division of CPT Holdings, Inc. All rights reserved.
The Real Ghostbusters” video gare is Copyright 1987 by Data East USA, Inc. All rights reserved, licensed from Coluabia Pictures Industries, Inc,
WHO YA GONNA CALL??
| To obtain replacement parts or technical assistance, contact the authorized Data East distributor in your area. If you require | referral or further technical assistance, you may contact Data East's Customer Service department during the hours of 8:00 an to 5:00 pm Pacific Time at (408) 286-7074.
} i. GENERAL INFORMATION jj
Installation and Set-Up.
The Real Ghostbusters™ video game is shipped with the control panel removed and bolted to the back door of the cabinet to prevent damage in shipment. Follow the instructions below to install the control panel and prepare the game for operation.
Locate the keys in the package on the front of the cabinet, open the Coin Door, and remove the shipping screws to remove the Rear Access Door. Remove the Control Panel from the Rear Access Door. The 2 bolts used to hold the Control Panel to the rear access door are also used to mount the control panel to the cabinet. The two remaining bolts required can be found threaded into nuts in the control panel.
The control panel has two (2) retaining clamps that hold down the hinged section of the’ panel. Release the clamps at this time. Position the control panel on the front of the cabinet. Raise up the hinged section of the -panel and reach inside the cabinet to start threading in the four mounting bolts. Thread in the bolts until they are finger tight. Using a ratchet with a 7/16" socket, tighten the mounting bolts. This may be easier to reach from the rear of the cabinet.
Plug the three (3) connectors from the control pane! into the main harness, matching the labels on the connectors. Check the rest of the game wiring for loose or unplugged connectors, and for secure mounting of the monitor, power supply, and game peb. Stabilize the cabinet using the leg levelers in the floor of the cabinet to prevent the game from rocking.
continued....
A. Installation and Set-Up (continued)
The selectable options have been pre-set at the factory for optimum player appeal, however, refer to Chapter 2, Section B: Dip Switch Options in this manual to set the game up for special requirements.
Remove the power cord from the inside of the cabinet and insert the strain relief plate into the slot at the bottom of the rear access door opening. Plug the AC cord into a grounded 117 VAC outlet and flip the power switch to the ON position. Allow 2 to 3 minutes for the monitor to warm up and check for proper demonstration mode video on _ the screen. Insert the proper coinage into a coin slot and start a game. Check for proper operation of all joystick controls and switches.
The game is now ready for operation! Please take a minute to fill out the reply form included with this manual. We welcome any comments or suggestions that you have regarding Data East's products and services.
GAME INFORMATION |
The Real Ghostbusters™ is a three player interactive video game, meaning that one, two, or three players may coin up and join the game at any time, even while a game is currently being played. Each of the three coin inputs is dedicated to one of the three sets of player controls to allow seperate coin credits per player. Each set of controls has an 8 way joystick, a Shoot (fire) button, and a Beam button. The Shoot button also functions as the Player Start button.
To begin play, a player must insert the proper coinage into the coin slot and press the respective Shoot/Start button. The player image will appear on the screen and can be manipulated up, down, right, and left using the joystick.
Aim the player image’s gun at an enemy target and press the Shoot button. When hit, the enemy image will turn into a transparent ghost image. Press the Beam button and aim at the transparent ghost to ‘capture’ it (pull it into your gun). Find and pick up the key to complete the scene and the player image will deposit all the ‘captured’ ghosts into the Ghost Storage chamber in a computer animated sequence before going on the next scene.
The player must avoid being hit or touched by the enemy. Picking up special items can reward the player with additional firepower, shields, and lives. Capture and deposit 100 ghost images for an extra life.
To aid in destroying large enemies, two or more players can cross their beams while aiming at the enemy to create very intense firepower and will vanquish the enemy much quicker.
The Real Ghostbusters ™ game options can be fine tuned to suit the sets of dip-switches on the DE-0273 pcb. Remove power to the game before changing the settings to avoid possible shock hazards. Unused switches indicated should be left in the OFF position location via two
as shown for proper operation. Factory settings are boldface.
DIP SWITCH 1
REMARKS 1 COIN = 1 PLAY OFF OFF 1 COIN PLAY ON OFF =2 CREDIT 1 COIN = 3 PLAY OFF ON zi 2 COIN PLAY ON ON NOT USED _MUST BE OFF OFF OFF OFF ATTRACT MODE SOUND SCREEN FLIP
DIP SWITCH 2
REMARKS NUMBER OF LIVES
LEVEL OF DIFFICULTY
CONTINUE MODE BEAM ENERGY PICK-UP YES OFF NO ON NORMAL OFF ON
THREE FIVE ONE INFINITE
NORMAL UP 1.5%
System Adjustments.
The Volume Control, Coin Counter, and Service Switch are located on the Service Panel. The Service Panel is accessed by opening the Coin Door and locating it on the wall on the left side.
- The Coin Counter increments once for every coin dropped through any of the coin entry slots.
- The Volume Control! is used to adjust the overall loudness of the game sounds. NOTE: The volume control potentiometer on the DE-0273 peb is pre-set to mid-range at the factory and should not be adjusted.
- The Service Switch can be used to add credits to the game without incrementing the Coin Counter.
The fuses for the AC power line and the 12 volts for the Coin Door lamps are located on the Switch Bracket of the Power Supply assembly as is the ON/OFF switch. The fuse holders are labeled on the Switch Bracket as to the proper fuse ratings.
The +S vde adjustment level control is on the Power Supply’s Switching Regulator is pre-set, at the factory. In the event that an adjustment is ever required, measure the +5 volt level present at the game logic peb with a Digital Multi-Meter while adjusting the output level of the Switching Regulator. The voltage must measure between +4.90 vdce to 5.10 vde at the game logic peb for proper operation.
D. Wiring Diagram.
EERE ah Sto re a ee | ITT
The following section lists the replacement parts available for The Real Ghostbusters ™ upright video game. When ordering replacement parts from your distributor, include the Data East part number to help expedite your order accurately.
CABINET, EMPTY, 1US30, GREY 365-0012-00 CONTROL PANEL ASSY., GHOSTBUSTERS 5§10-0121-00 COIN DOOR ASSY., 3 SLOT 510-0119-00 MONITOR ASSY., UNIVERSAL H/V §10-0120-00 POWER SUPPLY ASSY., 11AMP 510-0002-01 PCB SET, GHOSTBUSTERS 510-0110-00 PCB, EMI FILTER, DE-0239 520-0083-00 RETAINER, PLEX, MONITOR 535-0073-00 PLEX, CLEAR, DISPLAY 23.75 X 23.75 660-0001-01 UNDERLAY CARD, GHOSTBUSTERS 810-0026-00 DECAL, LEFT SIDE, GHOSTBUSTERS 820-0041-01 DECAL, RIGHT SIDE, GHOSTBUSTERS 820-0041-02 DECAL, COIN ENTRY DOOR 820-0044-00 PLEX, MARQUEE, GHOSTBUSTERS 830-0033-00 RETAINER, PLEX, MARQUEE 535-0078-00 SPEAKER, 4" RND., 4 OHM 031-0004-00 SPEAKER, 6 X 9" OVAL (REPLACES ABOVE) 031-0006-00 HARNESS, MAIN, GHOSTBUSTERS 036-0152-00 HARNESS, SPEAKER 036-0033-01 HARNESS, RGB PIGTAIL 036-0027-00
Control Panel.
CONTROL PANEL, BARE 535-0074-00 OVERLAY, CTRL PNL, GHOSTBUSTERS 800-0028-00 PUSHBUTTON, SHORT, RED 350-0001-02 PUSHBUTTON, SHORT, YELLOW 350-0001-04 PUSHBUTTON, SHORT, BLUE 350-0001-06 PUSHBUTTON HOLDER W/SWITCH 185-0001-00 NUT, PAL, NYLON 240-0001-01 HARNESS, CTRL PNL, GHOSTBUSTERS 036-0153-00 JOYSTICK, 8 WAY, MICROSWITCH 450-0014-01
REGULATOR, 5V @ 11 A& 12V@1A ISOLATION TRANSFORMER NOISE FILTER SWITCH BRACKET W/FUSEHOLDERS HARNESS, DC OUT, 11A
CASHBOX WITH LID CASHBOX LOCKING BAR FIXTURE, LAMP, DUAL LAMP, 40 WATT, INCANDESCENT LAMP, 14 VDC .19 AMP WEDGE, #161 SERVICE PANEL ASSY. COIN COUNTER, 12 VOLT POT, WW, SO OHM, 12.5 W SWITCH, PUSHBUTTON, MOM. RESTRICTOR PLATE, 8 WAY W/SWITCHES RESTRICTOR PLATE, 8 WAY W/O SWITCHES MICROSWITCH, MOM KNOB W/SHAFT, BLK 001-0012-00 010-0001-00 150-0004-00 515-0004-00 036-0031-02
535-0076-00 535-0077-00 170-0002-00 165-0004-01 165-0009-00 515-0029-00 080-0002-00 123-0008-12 180-0022-00 455-0038-01 455-0037-01 180-0017-00 455-0030-00
CUSTOMER REPLY CARD
To receive your copy of The Real Ghostbusters! Technical Service manual (including schematic diagrams), return the form below to the Data East, please include the Serial Number of the game cabinet. No manuals will be sent without Serial Numbers. Indicate if you would like to be on our Direct Mail list for service information.
We welcome your feedback, so please include any comments you have regarding our products and services in the section below and mail this form to:
Data East USA, Inc. 470 Needles Drive San Jose, CA. 95112
THE REAL GHOSTBUSTERS™ TECHNICAL SUPPORT MANUAL REQUEST FORM
COMPANY NAME:
ADDRESS:
CITY: STATE: ZIP:
TELEPHONE: —_ —ee
YOUR NAME: TITLE:
GAME CABINET SERIAL NUMBER:
ADD YOUR COMPANY TO OUR DIRECT MAIL LIST? (circle one) YES NO
COMMENTS: —_— Ss
ee
_— wh
ha
S—X—
e___—_—_—_—_—_— SSS —
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Warranty Information
Data East USA, Inc., ("Seller"), warrants only to the initial purchaser ("Buyer") of its products that the items listed below are free from defects in material and workmanship under normal use and service for the period specified:
GAME LOGIC PRINTED CIRCUIT BOARD(S) 90 DAYS
SWITCHING REGULATOR(S)
MONITOR PRINTED CIRCUIT BOARD(S)
No other parts of Seller’s products are warranted.
Warranty periods are effective from initial date of shipment from Seller to Buyer. Seller’s sole liability shall be, at its option, to repair or replace products which are returned to Seller during the warranty periods specified, provided:
- Seller is notified promptly upon discovery by Buyer that stated products are defective.
- Such products are properly packaged and then returned freight pre-paid, to Seller’s plant.
This warranty does not apply to any parts damaged during shipment and/or due to improper handiing, or due to improper installation or usage, or alteration. In no event shall the Seller be liable for any anticipated profits, loss of profits, loss of use, accidental or consequential damages, or any other losses incurred by the customer in connection with the purchase of a Data East USA, Inc., product.
WARRANTY DISCLAIMER
EXCEPT AS SPECIFICALLY PROVIDED IN A WRITTEN CONTRACT BETWEEN SELLER AND PURCHASER, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.