CATHODE RAY TOMES

Emergency Call Ambulance Manual

Emergency Call Ambulance (Export) (Sega, 1999) · Manual · 80 pages · 73 sections · original scan

Page 1

EMERGENCY CALL AMBULANCE

STD VERSION

OWNER’S MANUAL

Page 2

Warranty

Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.

Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.

Page 3

SPECIFICATIONS

Installation space: 68 in.(L) x 41 in. (W)

Height: 84 in.

Weight: Approx. 550 lbs.

Power maximum current: 3.5 Amp AC 120V 60 Hz

MONITOR: 29" NANAO MONITOR

INTRODUCTION OF THE OWNERS MANUAL

SEGA ENTERPRISES, LTD., has for more than 30 years been supplying various innovative and popular amusement products to the world market. This Owners Manual is intended to provide detailed descriptions together with all the necessary installation, game settings and parts ordering information related to EMERGENCY CALL AMBULANCE, a new SEGA product.

This manual is intended for those who have knowledge of electricity and technical expertise, especially in ICs, CRTs, microprocessors, and circuit boards. Read this manual carefully to acquire sufficient knowledge before working on the machine. Should there be a malfunction, non-technical personnel should under no circumstances touch the interior system. Should the need arise, contact our main office, or the closest branch office listed below.

SEGA ENTERPRISES, INC. (USA) Customer Service 45133 Industrial Drive Fremont, CA 94538 Phone 415-701-6580 Fax 415-701-6594 7:30 am - 4:00 pm, Pacific Standard Time Monday thru Friday

Page 4

General Precautions

Follow Instructions: All operating and use instructions should be followed. Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use only mounting accessories recommended by the manufacturer. Moving the Product: This product should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product to overturn. Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating; these openings must not be blocked or covered. The openings should never be blocked by placing the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your local power company. For products intended to operate from battery power or other sources, refer to the operating instructions. Grounding or Polarization: This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. Power Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

  • If the power cord or plug is damaged;
  • If liquid has been spilled, or objects have fallen into the product;
  • If the product has been exposed to rain or water;
  • If the product does not operate normally when following the operating instructions. Adjust only those controls that are explained in the operating instructions. An improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation;
  • If the product has been dropped or damaged in any way;
  • When the product exhibits a distinct change in performance; this indicates a need for service. Replacement Parts: When replacement parts are required, be sure the service technician has used replacements parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Page 5

Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Lithium Battery- Dispose of batteries only in accordance with the battery manufacturer’ s recommendations. Do not dispose in an open flame condition, since the battery may explode. Cleaning: When cleaning the monitor glass, use water or glass cleaner and a soft cloth. Do not apply chemicals such as benzine, thinner, etc. Location: This an indoor game machine, DO NOT install it outside. To ensure proper usage, avoid installing indoors in the places mentioned below:

  • Places subject to rain/water leakage, or condensation due to humidity; + In close proximity to a potential wet area; + Locations receiving direct sunlight;
  • Places close to heating units or hot air; eIn the vicinity of highly inflammable/volatile chemicals or hazardous matter;
  • On sloped surfaces; + In the vicinity of emergency response facilities such as fire exits and fire extinguishers; + Places subject to any type of violent impact; + Dusty places.

INSTALLATION PRECAUTIONS + Verify the amperage of the branch circuit outlet before plugging in the power plug. Do not overload the circuit.

+ Avoid using an extension cord. If one is required, use an extension cord of type SJT, 16/3 AWG rated min. 120 VAC, 7A.

  • Moving this unit requires a minimum clearance (of doors, etc.) of 32” (W) by 77” (H). + For the operation of this machine, secure a minimum area of 32” (W) by 42”(D).

REGULATORY APPROVALS This game has been tested and found to comply with the Federal Communications Commission Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This game has been tested and listed by Underwriters Laboratories, Inc., to ANSI/UL22.

LISTED

SK92

AMUSEMENT MACHINE

Page 6
  • PRECAUTIONS TO BE HEEDED FOR OPERATION

In order to prevent accidents, be sure to comply with the following points before and during operation.

PRECAUTIONS TO BE HEEDED FOR OPERATION BEFORE STARTING THE OPERATION

@ In order to avoid accidents, check the following before starting the operation: Check if all of the adjusters are in contact with the surface. If they are not, the cabinet can move and cause an accident.

WARNING!

ensure contact with floor

Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step. @ To avoid electric shock, check to see if door & cover parts are closed.

@ To avoid electric shock, short circuit and or parts damage, do not put the following items on or in the periphery of the product:

Flower vases, flower pots, cups, water tanks, cosmetics, and receptacles/ containers/vessels containing chemicals and water.

To avoid injury, be sure to provide sufficient space by considering the potentially crowded situation at the installation location. Insufficient installation space can cause the player to come into contact with or hit others

CAUTION! and result in injury or trouble.
Page 7

PRECAUTIONS TO BE HEEDED DURING OPERATION

CAUTION!
CAUTION! To avoid injury and accidents, those who fall under the following catagories are not allowed to play the game:
  • Intoxicated persons
  • Those who have high blood pressure or heart problems.
  • Those who have experienced muscle convulsion or loss of consciousness when playing video games, etc.
  • Persons susceptible to motion sickness.
  • Persons whose acts runs counter to the products warning displays.
  • Instruct those who wear high-heeled shoes to refrain from playing the game by explaining that playing the game with highheeled shoes is very dangerous and likely to cause a potentially hazardous situation.

To avoid electric shock and short circuit, do not allow customers to put hands and fingers or extraneous matter in openings of the product or small openings in or around doors. To avoid electric shock and short circuit, do not allow the customers to unplug the power plug without a justifiable reason. Although this product has the accident preventive covering attached to potentially hazardous places where hand and fingers could be caught, small children are unable to perceive hazards. Use care so that small children do not come close to the product when in play. Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage and/or falling down, resulting in injury due to fragments and falling down.

Page 8
  • NAME OF PARTS

GAME SPECIFICATIONS WIDTH in. LENGTH in. HEIGHT in. WEIGHT lbs.

All measurements are and rounded UP

DURING SHIPPING 45” xX 70” x 84” ~ 600 LBS.

WHEN ASSEMBLED 39” x 65” x 80” 550 LBS.

Page 9
  • ACCESSORIES

KEY DESCRIPTION _ORNERS. MANUAL spessne (2) ©) Part No. (Qty.) 999-0834 ‘

Note For opening/closing For the CASHBOX DOOR the doors Figures a

If Part No. has no description, the Number has not been OB aged 0 "36

registered or can not be registered. Such a part may not @ ~ be obtainable even if the customer desires to purchase it. Therefore, ensure that the part is in safekeeping with you.

TAMPERPROOF WRENCH ASSY FIBER CABLE M8 540-0009-01 (1) 600-6275-0500 (2) TOOL For communications play

Page 10

APPLIES TO ‘MODEL 3’ BOARDS CONTAINED IN THE

WARNING! FOLLOWING GAMES:

LOST WORLD, VIRTUA FIGHTER 3, SUPER GT, SEGA BASS FISHING, STRIKER 2 HARLEY DAVIDSON, RALLY 2, DAYTONA 2, DIRT DEVILS, HOUSE OF THE DEAD 2, OCEAN HUNTER, STAR WARS TRILOGY, ZOMBIE REVENGE, CRAZY TAXI, AMBULANCE DRIVER

!!NEVER SHIP MODEL 3 / NAOMI GAME

BOARDS OUTSIDE OF CAGE!!

f) THE SHIPMENT METHOD DESCRIBED BELOW ONLY

CARTON BOX 601-8928 (1) Used for transporting the GAME BOARD. {SUPPLIED WITH YOUR GAME}

DO NOT SHIP GAME BOARD WITHOUT THIS BOX AS IT MAY DAMAGE THE GAME BOARD AND VOID YOUR WARRANTY.

“CHECK SIDE” Display

FILTER BOARD

THEY MAY BE DAMAGED BEYOND REPAIR. PLEASE SHIP THEM

h NO OTHER GAMES BOARDS ARE TO BE SHIPPED IN THE CAGE AS

WITHOUT CAGE PROPERLY PROTECTED DURING SHIPPING.

WARNING!
Page 11
  • ASSEMBLING AND INSTALLATION

A

CAUTION! Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling may cause damage to the machine, or malfunctioning to occur. When assembling, be sure to perform work by plural persons. Depending on the assembly work, there are some cases in which performing the work by a single person can cause personal injury or parts damage.

When carrying out the assembly work, follow the procedure in the following 5-item sequence:

A

CAUTION! 1 | ASSY OF THE REAR CABI (COCKPIT)

ASSY OF BILLBOARD

SECURING IN PLACE (ADJUSTER ADJUSTMENT)

4 | POWER SUPPLY

ASSEMBLING CHECK

1 ASSY OF REAR CABI (COCKPIT)

ote that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width across flats are required for the assembly work.

Permanantly tightening the hex bolts should not be completed until the leg levelers are adjusted properly.

POWER CORD

Page 12

® Install the coin chute tower on the Right-hand side of cabinet. Open the coin chute door and the cashbox door to secure with the 4 hexagon bolts from inside the doors. Please note that the Coin Chute tower is NOT mounted

COIN CHUTE DOOR

COIN CHUTE TOWER

FLAT WASHER HEXAGON BOLT (4} M& X20

NOTE: ON SEGA’s CRAZY TAXI GAME THERE IS NOT TWO COCKPITS SIDE BY SIDE AS PICTURED ABOVE. THE GAME HAS ONLY ONE COCKPIT AND THE COIN TOWER WILL MOUNT ON THE RIGHT SIDE AS YOU FACE THE CABINET..
Page 13

2 ASSY OF THE BILLBOARD

Due to its large size, it is very difficult for one person alone to install the billboard, Make sure 2 or more persons are available to perform this work. Attempting to perform the installation alone can cause an accident.

WARNING!

® Mount Billboard on cabinet by ensuring the front lip of the Billboard is securely placed under the mounting bracket already installed on the cabinet. Fasten with the 3 hexagon bolts.

@) Connect all of the 4 connectors inside the Billboard box (This needs to be done prior to final installation of Billboard Assy).

™t-——__HEXAGON BOLT (black) (4EA)

BILLBOARD HOLDER

HEXAGON BOLT(black) (4)

RILLBOARD CASE

BILLBOARD’ s_ connector

Page 14
WARNING! SECURING IN PLACE (ADJUSTER ADJUSTMENT)

Be sure to have all the Adjusters make contact with the surface. Unless the Adjusters come into contact with the surface, the Cabinet can move of itself, causing an accident.

This machine has 4 each of casters and adjusters (shown below). When the installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level.

@ Move the machine to the installation position.

@ Move the machine to the installation position @Q Cause all of the leg levelers to make contact

with the floor. By using a wrench, make adjustments in the height of the leg adjusters to ensure that the machine's position is level. \ Leg Leveler

©) After making adjustments, fasten the leg Leg Leveler

adjuster nut upward and secure the height of the leg adjuster.

Page 15

4 | Power SUPPLY

@ Ensure that the power cord is not exposed on the surface (passage, etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the cord can cause an electric shock or short circuit. @ Ensure that the wiring position is not in the customer's passage way

WARNING! or the wiring has protective covering.

Connect the game to the power supply and turn on power to the game. Before connecting power supply be sure that power switch is off

MAIN SW

@ Turning the AC unit’s main switch on will cause the machine Q In the Power On check, the steering wheel turns left and right,

to start the power check and network check automatically.

and then returns to the centering position and stops. In this check, the values of the VR inside the control panel are corrected.

G3) Until this check is finished, and the steering wheel stops, do

not touch the steering wheel or play the game.

To the Power Supply Socket outlet

Page 16

5 ASSEMBLING CHECK

The TEST MENU allows for each part of the cabinet to be checked, the Monitor to be adjusted, and the coin and game

related various functions to be performed.

Selecting the MEMORY TEST on the test mode menu screen causes the on-board memory to be tested automatically. The game board is satisfactory if the display beside each IC No. shows GOOD.

TEST MENU

MEMORY TEST BOUNDRY SCAN TEST INPUT TEST OUTPUT TE SOUND TEST CRI. TEST GAME ASSIGNEMENTS COIN ASSIGNMENTS VOLUME ADJUSTMENTS CLOCK ADJUSTMENTS BOOKKEEPING. BACKUP DATA CLEAR >EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT CPU ROM TEST

Goop (CROMO3MASK)—IC.1
‘GOOD{CROMO2MASK)IC.
GOOD(CROMO1MASK)IC.3
GOOD(CROMOOMASK)IC.4
GOOD(CROM13MASK)ICS
GOOD(CROM12MASK)IC.6
GOOD(CROMIIMASK)—IC.7
GOOD(CROM10MASK)IC.8

GOOD(CROM33 EPROM) — IC.13,

GOOD(CROM3.EPROM)ICI
GOOD{CROM31EPROM)ICIS
‘GOOD{CROM30EPROM)—IC.16
GOOD(CROM3EPROM)IC.17

GOOD{CROM2 EPROM) — IC.18

GOoD(CROMIEPROM)IC.19

GOOD{CROMO EPROM) — 1.20

INPUT TEST

STEERING 80 GAS 00 BRAKE 00.

VIEW CHANGE OFF SHIFT UP OFF SHIFT DOWN OFF

START OFF

coINél OFF COIN #2 OFF SERVICE-SW OFF TEST-SW OFF Selecting the INPUT TEST on the Test Mode menu screen causes the screen (on Which each switch adnV.R. are tested) to be displayed. Press each switch. For the coin switch test, insert a coin from the coin inlet with the coin chute door

being open. If the display beside each switch indicates “ON”, the switch and wiring connections are satisfactory. Check the display of V.R. value for steering wheel and accelerator & brake. If the V.R. values are not satisfactory, SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT

OUTPUT TEST

LAMP, OFF VIEW CHANGE LAMP OFF PATROL LAMP OFF

SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT make adjustments as neccesary.

In the OUTPUT TEST mode, carry out lamp test to ensure that each lamp lights up satisfactory.

Page 17

SOUND TEST

VoIce

EFFECT

BGM.

>EXIT

SELECT WITH SERVICE BUTTON AND. PRESS TEST BUTTON TO EXIT

CRTTEST 12

WHITE WM a

PRESS TEST BUTTON TO CONTINUE In the TEST mode, selecting SOUND TEST causes the screen, on which sound related BD and wiring connections are tested, to be displayed. Be sure to check if the sound is satisfactorily emitted from each of speaker and the sound volume is appropriate.

In the TEST mode menu, selecting C.R.T. TEST allows the screen (on which the projector is tested) to be displayed. Although the projector adjustments have been made at the same time of shipment from the factory, color deviation, etc., may occur due to the effect caused by geomagnitism, the location building’s steel frames and other game machines in the periphery. By watching the test mode screen, make judgement as to whether an adjustment is needed. If it is neccessary, adjust the projector by refering to Section 9.

Perform the above inspections also at the time of monthly inspection.

Page 18
  • PRECATIONS TO BE HEEDED WHEN MOVING THE MACHINE
WARNING!

AN

CAUTION! @ When moving the machine, be sure to pull out the plug from the power supply. Moving the machine with the plug as is inserted can damage the power cord and cause a fire or electric shock. @ When moving the machine on the floor, retract the Adjusters and ensure that Casters make contact with the floor. During transportation, pay careful attention so that Casters do not tread power cords. Damaging the power cords can cause an electric shock and/or short circuit. @ When lifting the cabinet, be sure to hold the catch portions or bottom part. Lifting the cabinet by holding other portions can damage parts and installation portions, due to the empty weight of the cabinet, and cause personal injury.

Use care when handling glass made parts. When the glass is damaged, fragments of glass can cause injury

De nol push ive cabiret from ths leltrig’l direchon.

Page 19
  • CONTENTS OF GAME

HOW TO OPERATE

The operation of Steering Wheel, and Accelerator & Brake pedals are similiar to an actual car. SHIFT LEVER

Input to (D) towards the monitor side to drive forward, and to (R) towards you to reverse. Auto transmission and not manual is applied to speed shifting. The DR LAMP displays Forward (D) and Reverse (R), whichever is being inputted.

STEERING WHEEL SHIFT LEVER

1K) (aa)

A °

START BUTTON

BRAKE PEDAL —~ ACCELERATOR PEDAL.

Page 20
  • EXPLANATION OF TEST AND DATA DISPLAY

By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable.

S

IMPORTANT! CAUTIONS TO BE HEEDED WHEN USING THE TEST MODE: In the case where plural machines are linked for communication play, if even one seat enters the test mode, all of the linked seats will enter the test mode. Therefore, if any one of the linked machines is in play, use care so as not to use the test mode. The contents of the setting changes made will not be effective unless the test mode is finished in the test mode. When the setting is changed, be sure to “EXIT” in the menu mode. Do not press the TEST BUTTON during network check at the time of turning the power on or exiting from the test mode. If anyone of the linked machines uses the test mode during network check, all other Seats will continue network checking. Cause all of the Seats to reenter the test mode and then have all of the Seats exit from the test mode simultaneously.

TABLE 7 EXPLANATION OF TEST MODE

ITEMS DESCRIPTION SECTIONS

When the machine is installed, perform the following: INSTALLATION | 1. Check to see that each setting is as per standard setting made 7-10, 7-11 OF MACHINE at the time of shipment. 71-6

  • In the INPUT TEST mode, check each SW and VR. 7-7
  • In the OUTPUT TEST mode, check each of lamps. 7-3,7-4
  • In the MEMORY TEST mode, check ICs on the IC Board.

Choose MEMORY TEST in the MENU mode to allow the

MEMORYMEMORY test to be performed. In this test, PROGRAM7-3,7-4

RAMs, ROMs, and ICs on the IC Board are checked.

Periodically perform the following: 7-10,7 -I1

  • MEMORY TEST
  • Ascertain each setting. 7-6
  • In the INPUT TEST mode, test the CONTROL device
  • In the OUTPUT TEST mode, check each of lamps. 7-7
CONTROL1. In the INPUT TEST mode, check each SW and VR.71-6

SYSTEM 2. Adjust or replace each SW and VR.

  • If the problem can not be solved yet, check the CONTROL’s moves. 8

MONITOR In the MONITOR ADJUSTMENT mode, check to see if the 12

MONITOR adjustment is appropriately made.

IC BOARD1. MEMORY TESTi
  • In the SOUND TEST mode, check the sound related ROMs. 7-8

DATA CHECK _ | Check such data as game play time and histogram to adjust the 7-15 difficulty level, etc

Page 21

7-1 SWITCH UNIT AND COIN METER

Never touch places other than those specified. Touching places not specified can cause electric shock and short circuit.

@ Adjust to the optimum sound volume by considering the environmental requirements of the installation location. @ If the COIN METER and the game board are electrically disconnected,

IMPORTANT! game play is not possible.

Open COIN CHUTE DOOR, and the switch unit shown appears. The function of each switch is as follows:

SWITCH UNIT

(@) SOUND VOLUME Controls the speaker volume of the right/left speakers.

(2) TEST BUTTON (TEST SW)

For the handling of the TEST BUTTON, refer to the section on test mode.

(3) SERVICE BUTTON (SERVICE SW)

Gives credits without registering on the coin meter.

SOUND VOLUME

COIN METER an

ce Sx SOUND VOLUME

°

DEMAGNETIZER SWITCH

Page 22

7-2 SYSTEM TEST MODE

The SYSTEM TEST mode mainly allows for IC Board functioning check, monitor adjustment, coin assignments, etc.

TEST MENU

MEMORY TEST BOUNDRY SCAN TEST INPUT TEST OUTPUT TEST SOUND TEST CRI. TEST GAME ASSIGNEMENTS COIN ASSIGNMEN’ VOLUME ADJUSTMENTS CLOCK ADJUSTMENTS BOOKKEEPING BACKUP DATA CLEAR >EXIT

TEST BUTTON TO EXIT

SELECT WITH SERVICE BUTTON AND PRESS

7-3 MEMORY TEST

CPU ROM TEST

GooD (cRoMo3MASK)ICI
GooD(cROMO2MASK)IC.2
GOOD(CROMOIMASK)IC.
GOOD{CROMOOMASK)IC.4
GOOD(CROMI3,MASK)ICS
GooD(cROM12MASK)—IC.6
GOOD(CROMIIMASK)IC.7
GOOD(CROMIOMASK)IC.8
GOOD(CROM33,EPROM)IC.13
GooD(cROM32EPROM)IC.14

GOOD(CROM31 EPROM) — IC.15,

GOOD(CROM30EPROM)—IC.16
GOOD(CROM3EPROM)—IC.17
GOoD(CROM2EPROM)IC.18

GOOD(CROMI EPROM) — IC.19 GooD(cROMO EPROM) — IC.20 ® Push the TEST BUTTON to cause the following TEST MENU to appear:

By pushing the SERVICE BUTTON, bring the “>” mark to the desired item and press the TEST BUTTON. This

will select the item’s test. The View Change button #3 (yellow) instead of the test button can be used, and View Change buttons | (red) & 2 (blue) instead of service button (for moving arrow) can be used.

After the test is complete, move the “>” mark to “EXIT” and press the TEST BUTTON to return to

game mode.

The MEMORY TEST mode is for checking the on-BD memeory IC functioning. “GOOD” is displayed for normal ICs and “BAD” is displayed for abnormal ICs

When the test is completed, if the results are shown left, it is satisfactory. During the test, TESTING NOW is displayed on the lower part of the screen. After an elapse of 5 minutes, if the test is not finished, the IC Board may be malfunctioning. Upon finishing the test, press the Test Button to proceed to “CPU ROM TEST”.

CPU RAM TEST

GOOD(SDRAM) Ic13 14 IC.

GOODBACKUP SRAM) IC21 1C.22

GOOD(SCROLL SDRAM) IC.94

GOOD(SCROLL SRAM) IC.17 IC.18

PRESS SERVICE BUTTON TO CONTINUE Ic.16 VIDEO BOARD ROM TEST

GOOD (VROM03) Ic. 26 GOOD(VROMO2) IC.27 GOOD(VROMO1) IC. 28 GOOD(VROMOD) Ic.29 GOOD(VROM13) Ic. 30 GOOD(VROM12) IC.31 GOOD(VROMI1) 1c.32 GOOD(VROM10) Ic.33, GOOD(VROM33) Ic. 34 GOOD(VROM32) Ic.35 GOOD(VROM31) IC. 36 GOOD(VROM30) Ic.37 GOOD(VROM3) Ic. 38 GOOD(VROM?2) Ic. 39 GOOD(VROM1) Ic. 40 GOOD(VROMO) Ic.41

PRESS SERVICE BUTTON TO CONTINUE

VIDEO BOARD RAM TEST

PRESS TEST BUTTON TO EXIT By pressing the SERVICE button, move the arrow (->) to select the

desired item. Press the TEST button to execute the selected item.

Select EXIT and press the TEST button to exit from the TEST MODE

and return to the normal mode.

Page 23

7-4 INPUT TEST

Select INPUT TEST to have the screen shown below appear and to observe the status of each switch and the value of each V.R. on the Control Panel. Periodically check the status of each switch and V.R. on this screen.

INPUT TEST

STEERING 80 GAS 00 BRAKE 00

VIEW CHANGE OFF SHIFT UP OFF SHIFT DOWN OFF

START OFF

COIN #1 OFF COIN #2 OFF

SERVICE-SW OFF

TEST-SW OFF

SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT

FIG. 7.4 INPUT TEST

7-5 OUTPUT TEST

OUTPUT TEST

STARTLAMPOFF
VIEW CHANGELAMPOFF
PATROLLAMPOFF

>EXIT

SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT

FIG. 7.5 OUTPUT TEST @ By pressing each switch, if the display on the right-hand side of the name of each switch changes to ON from OFF, the SW and the wiring connections are satisfactory.

To check CHUTE | & CHUTE 2 coin switches, open the COIN CHUTE DOOR and insert a coin(s) in the slot.

Press either the TEST BUTTON and the START BUTTON to return to the test menu.

As a standard, refer to the following for each of the Volume’s adjustment. By operating the Handle (Steering Wheel) and Pedal, if the V of each Volume guage smoothly moves as the corresponding value varies ina natural manner, then it is satisfactory.

Choose OUTPUT TEST to cause the following lower screen to appear. In this test, check the status of each lamp.

The right-hand side “ON” & “OFF” display of START LAMP automatically alternates. The lamp lights up when “ON” is displayed and goes off when “OFF” is displayed. Check to ensure that the lamp lights up and goes off in consistency with the display of “ON” and “OFF”.

Press the TEST button to return to the TEST MENU.

Page 24

7-6 BOUNDRY SCAN TEST

Selecting the Boundry Scan test cuases the Game board’s settings in terms of hardware to be per-

formed automatically.

TOTALERRORS. BOUNDRY SCAN TEST

PRESS TEST BUTTON TO EXIT

FIG. 7.6 BOUNDRY SCAN TEST

7-7 CLOCK ADJUSTMENTS

CLOCK ADJUSTMENTS

19991001 (FR, BATTERY ‘YEAR (1999-2098) MONTH DAY HOUR MINUTE SECOND DAY OF THE WEEK

>EXIT 18:30730" OK. 1999

o1

FRI

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT

FIG. 7.7 CLOCK ADJUSTMENTS When the test is completed, if the results are shown left, it is satisfactory.

After finishing the test, press the test button to have the menu mode return to the screen. next, turnpower off and

then turn it back on again. By so doing, the Board intialization is perfromed to avoid malfunctioning.

If there is any hardware problems, error message is displayed. Please contact the offices herein stated or where the product was purchased from.

This allows the settings for time and date to be set for tournament setting.

Page 25

7-8 SOUND TEST

SOUND TEST

BGM 0 SE. o SPEAKERS TEST o

>EXIT

SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT

FIG. 7.8 SOUND TEST

7-9 C.R.T. TEST

CRI.TEST 12

PRESS TEST BUTTON TO CONTINUE

FIG. 7.9 C.R.T. TEST This test mode allows each sound related board and speaker to be checked.

e Press the Service Button to select the sound to be tested, and press the Test Button to have the selected Sound Test screen appear.

@ Select EXIT and press the Test Button to return to the Test Menu.

@ Select C.R.T. TEST to cause the MONITOR to display the screen shown left, allowing MONITOR adjustment status to be checked.

@ Periodically check the MONITOR adjustment status on this screen.

The screen (1/2) enables color adjustment check to be performed. The color bar of each of the 4 colors, i-e.,red, green, blue, and white, is the darkest at the extreme left and becomes brighter towards the extreme right.

Press the TEST BUTTON to shift to the next screen (2/2).

The screen (2/2) allows screen size and distortion to be tested.

Check if the CROSSHATCH FRAME LINE goes out of the screen and if the crosshatch lines are distorted.

Press the TEST BUTTON to return to the MENU mode.

Page 26

7-10 VOLUME ADJUSTMENTS

Re-setting the volume values at this screen if operation is unsatisfactory. Also, when V.R. adjustment or replacement has been made, be sure to perform the setting V.R. value setting on this screen.

STEERING

Gas

BRAKE VOLUME ADJUSTMENTS

MIN (00)MAX (FF)NUETRAL (80)
MIN (00)MAX (FF)NUETRAL (00)
MIN (00)MAX (FF)NUETRAL (00)

EXIT WITH SAVE

EXIT WITHOUT SAVE

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON TO EXIT

FIG. 7.10 VOLUME SETTING Set the volume by moving the steering, accelerator pedal, brake pedal fully within the moving range. Volume value has shown 16HX..

STEERING After moving the steering fully to the left and right, return it to the center position.

GAS After fully inclining the accelerator pedal, take you r foot out.

BRAKE After fully inclining the brake pedal, take your foot out.

Bring the arrow to “EXIT WITH SAVE” and press the test button to have the menu mode return to the screen and register the contents of setting. Steering needs to be in center position, your feet off both pedals, return to the main menu, setting volume will change at this time. Bring the arrow to “EXIT WITHOUT SAVE” and press the test button to have the menu mode return to the screen without changing the contents of volume adjustments.

Page 27

7-11 GAME ASSIGNMENTS

Selecting the GAME ASSIGNMENTS in the MENU mode causes the present game settings to be displayed and also the game settings changes (game difficulty, etc.) can be made. Each item displays the following content.

SETTING CHANGE PROCEDURE

@ Press the SERVICE BUTTON to move the “>” to the desired item. @ Choose the desired setting change item by using the TEST BUTTON. @ To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.

GAME ASSIGNMENTS

DIFFICULTY NORMAL

ADVERTISE SOUND ON GAME OVER LINE ON

MILE/METER MILE GAME OVER COLOR RED

GAME OVER SOUND ON SIREN VOLUME 7 STEERING REACTION 4 GEAR LEVER UP/DOWN TOURNAMENT MODE ON EXIT

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON TO EXIT @ DIFFICULTY Set to degree of difficulty by changing the the decreasing speed of health point. VERY EASY, EASY, HARD, NORMAL, HARD, VERY HARD.

ADVERTISE SOUND Sets the advertise sound. OFF-no sound, ON-sound.

MILE/METER Change the indication unit during play. MPH-mile, KM/hmeter.

GAME OVER COLOR Set to fade color over the whole screen when it’s game over.

GAME OVER LINE Set indicate or not indicate the line across the center of screen when game over.

GAME OVER SOUND Set the electric sound and voice, Sound or No Sound when game over.

SIREN VOLUME Change the Siren Volume (Min-7)

STEERING REACTION Change the strength of handle reaction. OFF-no reaction, 7-strongest setting.

GEAR LEVER Depends on the usage of console shift type, set up to one of these UP/DOWN-4 SPEED. If you don’t set up correctly, it affects the game play, set up accurately.

TOURNAMENT MODE Special add up the ranking in the fixed period time. If it is ON then you will need to set up the CLOCK SETTINGs to keep track of start date, finish date, etc...

Page 28

7 - 12 COIN ASSIGNMENTS

The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as the basic numbers: of coins and credits. This mode expresses “how many coins correspond to how many credits.”

SETTING CHANGE PROCEDURE

Gror Setting changes cannot be stored unless the TEST BUTTON is pressed

RTANT! while the arrow is on EXIT.

CD) Press the SERVICE BUTTON to move the arrow to the desired item.

@ Choose the desired setting change item by using the TEST BUTTON.

@ To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.

7 - 12 COIN ASSIGNMENTS

COIN ASSIGNMENTS

COIN/CREDIT SETTING #1 CHUTE#! = 1COIN 1 CREDIT

CHUTE#2 = 1COIN 1 CREDIT

MANUAL SETTING

>EXIT

‘SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON @ = COIN/CREDIT SETTING Sets the CREDITS increase increment per coin insertion. There are 27 setings from #1 to #27, expressed in XX CREDIT as against XX COINS inserted. (TABLE 7.10a, 7.10b) #27 refers to FREE PLAY. When the COIN CHUTE TYPE is set to INDIVIDUAL, there are some setting numbers not displayed as indicated in TABLE 7.10b.

@ MANUAL SETTING This allows credit increase setting as against coin insertion to be further set in the manner finer than COIN/CREDIT SETTING (refer to TABLE 7.10c).

Page 29

TABLE 7.12a COIN/CREDIT SETTING (COIN CHUTE COMMON TYPE)

SETTING FUNCTIONING OF CHUTE#1

SETTING #11 COIN1 CREDIT.
SETTING #21 COIN2 CREDITS
SETTING #31 COIN3 CREDITS
SETTING #41 COIN4 CREDITS
SETTING #51 COIN5 CREDITS
SETTING #61 COIN2 CREDITS
SETTING #71 COIN5 CREDITS
SETTING #81 COIN3 CREDITS
SETTING #91 COIN4 CREDITS
SETTING #101 COIN5 CREDITS
SETTING #111 COIN6 CREDITS
SETTING #122 COINS1 CREDIT
SETTING #131 COIN1 CREDIT
SETTING #141 COIN2 CREDITS
SETTING #151 COIN1 CREDIT

2 COINS 3 CREDITS

SETTING #161 COIN3 CREDITS
SETTING #173 COINS1 CREDIT.
SETTING #184 COINS1 CREDIT
SETTING #191 COIN1 CREDIT

2 COINS 2 CREDITS 3 COINS 3 CREDITS 4 COINS 5 CREDITS

SETTING #201 COIN5 CREDITS
SETTING #215 COINS1 CREDIT.
SETTING #221 COIN2 CREDITS
SETTING #232 COINS1 CREDIT

4 COINS 2 CREDITS 5 COINS 3 CREDITS

SETTING #241 COIN3 CREDITS
SETTING #251 COIN1 CREDIT

2 COINS 2 CREDITS 3 COINS 3 CREDITS 4 COINS 4 CREDITS 5 COINS 6 CREDITS

SETTING #261 COIN1 CREDITS

SETTING #27 FREE PLAY

Page 30

MANUAL SETTING

Selecting MANUAL SETTING in the COIN ASSIGNMENTS mode displays the following screen.

COIN CHUTE #1 MULTIPLIER —_ SS |S (6)

FIG. 7.12b MANUAL SETTING

@ Determines Coin/Credit setting.

@ This sets how many coins should be inserted to obtain one Service Coin.

@ This sets how many tokens one coin represents.

Table 7.12c MANUAL SETTING

COIN TO CREDIT 1 COIN 1 CREDIT. 2 COINS 1 CREDIT. 3 COINS 1 CREDIT. 4 COINS 1 CREDIT. 5 COINS 1 CREDIT. 6 COINS 1 CREDIT. 7 COINS 1 CREDIT. 8 COINS 1 CREDIT 9 COINS 1 CREDIT.

BONUS ADDER NO BONUS ADDER 2 COINS GIVE 1 EXTRA COIN 3 COINS GIVE 1 EXTRA COIN 4 COINS GIVE | EXTRA COIN 5 COINS GIVE | EXTRA COIN 6 COINS GIVE | EXTRA COIN 7 COINS GIVE | EXTRA COIN 8 COINS GIVE | EXTRA COIN 9 COINS GIVE 1 EXTRA COIN

COIN CHUTE MULTIPLIER 1 COIN COUNTS AS 1 COIN 1 COIN COUNTS AS 2 COINS 1 COIN COUNTS AS 3 COINS 1 COIN COUNTS AS 4 COINS 1 COIN COUNTS AS 5 COINS 1 COIN COUNTS AS 6 COINS 1 COIN COUNTS AS 7 COINS 1 COIN COUNTS AS 8 COINS 1 COIN COUNTS AS 9 COINS

Page 31

7 - 13 BOOKKEEPING Choosing BOOKKEEPING in the MENU mode displays the data of operating status up to the present are shown on 2 pages. Press the TEST BUTTON to proceed to PAGE 2/2.

PRESS TEST BUTTON TO CONTINUE

FIG. 7.13a BOOKKEEPING (1/2)

BOOKKEEPING PAGE 2/2

TIME HISTOGRAM S 0

OVER 10MS9S 0

PRESS TEST BUTTON TO EXIT

FIG. 7.13b BOOKKEEPING (2/2)

7-14 BACKUP DATA CLEAR

BACKUP DATA CLEAR

SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT

FIG. 7.14 BACKUP DATA CLEAR @ COIN CHUTE#*: BOOKKEEPING PAGEL/2 : . . Number of coins put in each Coin Chute.

COIN CHUTE #1 o

COIN CHUTE #2 o

TOTAL COINS 0 @ TOTALCOINS:

COIN CREDITS0Total number of activations of Coin Chutes.

SERVICE CREDITS o

TOTAL CREDITSo@COI crEDITs:
NUMBER OF GAMES0Number of credits registered by inserting coins.
TOTALTIME,0D 0H oM os
PLAYTIMEDoH OM 0s..
AVERAGE PLAYTIMEOH OM OsIn Page 2/2, Histogram of Number of Play as against Play
LONGEST PLAYTIMEOH OM asmeisdijA
SHORTEST PLAYineof ob 08Time is displayed. For setting the DIFFICULTY, refer to this

histogram.

Clears the contents of BOOKKEEPING and high score player ranking entry.

sho eine) @ When clearing, bring the arrow to “YES” and when not clearing, to “NO”, by using the SERVICE BUTTON, and push the TEST BUTTON.

@ = When the data has been cleared, “COMPLETED”

will be displayed. Bring the arrow to “NO” and press the TEST BUTTON to cause the MENU mode to return on to the screen.

@ Note that the contents of the GAME SETTING, COIN SETTING, and BOARD SETTING are not affected by BACKUP DATA CLEAR operation.

Page 32
  • HANDLE MECHA

@ In order to prevent an electric shock and short circuit, be sure to turn power off before performing work by touching the interior parts of the product.

WARNING! @ Be careful so as not to damage wirings. Damaged wiring can cause an electric shock . or short circuit accident.

In the test mode, if the steering wheel’s VR variations are not within the allowable range, the VR installation position adjustments or VR replacement is needed. Also, be sure to apply grease to the VR gear portion once every 3 months.

rr REMOVING THE CONTROL PANEL

Turn the power switch off. Remove a total of 4 tamperproof screws from both sides of the control panel’s front. Remove the two tamperproof screws fromthe underside of the control panel. Wiring connectors are connected inside the control panel. Carefully draw the control panel in a mnner so as not to damage wiring. CREGCIOIOIS) Disconnect the wiring connector.

TAMPERPROOF SCREW (black) (6) M8 x 30

Page 33

8 - 2 REPLACING AND ADJUSTING THE HANDLE’S VR

WARNING! @ Never touch places other than those specified. Touching places not specified can cause electric shock and/or short circuit. @ After the replacement or adjustment of the VR, be sure to set the variable value of the VR in the test mode’s Volume Setting.

REPLACING THE VOLUME

® Turn off the power. @ Disconnect the connector.

  • Take out the 2 screws which secure the volume Bracket and remove the Volume Bracket. @ Take out the 2 screws to remove the Volume Gear and replace the Volume. © After replacing the Volume, perform Volume setting in the Volume Setting Mode.

ADJUSTING THE VOLUME

©O® CGO In the Test Mode, have the Volume value indicating screen displayed. Loosen the 2 screws which secure the Volume Bracket to disengage Gear Mesh. With the Steering Wheel in the centering position, cause gears to be engaged in the manner so that the Volume Shaft is in the status shown below.

Fasten screws which secure the Volume Bracket.

Perform Volume setting as per the Volume Setting Mode.

VR_BRACKET V.R. 220-5484. 220-5373

SCREW (2) M48, w/flat and spring washers

Page 34

8 - 3 GREASING

@ Never touch places other than those specified. Touching places not specified can cause electric shock and/or short circuit.

WARNING! @ After the replacement or adjustment of the VR, be sure to set the variable value of . the VR in the test mode’s Volume Setting.

Apply greasing to the Volume gear mesh portion every 3 months. For spray greasing, use Grease Mate (Part No. 090-0066).

Page 35
  • SHIFT LEVER

@ In order to prevent electric shock and short circuit, be sure to turn off the power before performing work on the interior parts of the product.

CAUTION! |] @ Be careful not to damage wiring. Damaged wiring can cause electric shock or short circuit. @ Do not touch places other than those specified. Touching places other than those specified can cause an electric shock or short circuit accident.

If the Shift Lever operation is not satisfactory, remove the Shift Lever in the following procedure and replace the microswitch.

9-1 REMOVING THE SHIFT LEVER

Turn Power off.

Take out the 4 SPECIAL BOLTS and pull the SHIFT LEVER UNIT upward by paying careful attention so as not to damage the iring. Disconnect the 2 connectors to allow the unit to be removed. ©O ©O

When reinstalling, follow the procedure oppisite as when removing. At this time, ensure that*DOWN” display

TAMPERPROOF SCREW M5 X12, black appears on the upper part as shown.

Page 36

9-2 SWITCH REPLACEMENT

Each microswitch is secured with 2 screws. Remove the 2 screws and replace the Microswitch.

LAFF LING OUREM Ves M3 X 16 v GREASING

ICROSWITCH

After replacing the Switch, check to see if the switch is inputted as per Shift Lever operation in the Test Mode.

Page 37
  • ACCEL & BRAKE(S)

@ In order to prevent an electric shock and short circuit, be sure to turn power off before performing work by touching the interior parts of the product. @ Be careful so as not to damage wirings. Damaged wiring can cause an electric

WARNING! shock or short circuit accident. @ Do not touch places other than those specified. Touching places not specified can cause an electric shock or short circuit accident.

If Accel and Brake operation is not satisfactory, adjustment of Volume installation position or Volume replacement is needed. Also, be sure to apply greasing to the gear mesh portion once every three months.

10 - 1 ADJUSTING AND REPLACING THE V.R.

When released: When stepped on: Under 30 H Over COH Under 30 H Over COH

ues in the Test Mode.

Since work is performed inside the energized cabinet, be very careful so as not to touch undesignated portions. Touching places not specified can cause an electric shock or short circuit.

® Take out the 2 truss screws and remove the Front Cover TRUSS SCREW '2) WaX8. chrome: from the Accel. & Brake unit.

Loosen the screw which secures the Potentiobase, and

adjust the Volume Value by moving the Base. Secure the Potentiobase. ©© ©

Perform Volume setting in the Volume Setting Mode.

FRONT COVER SCRE Wa 12, #/flat washer

TOTENTIOUASE. VR. 220-3373, 484

Page 38

Check Volume values in the Test Mode.

Since work is performed inside the energized cabinet, be very careful so as not to touch . TRUSS SCREW (2:

undesignated portions. Touching places not MAX POTENTIOCOVER

specified can cause an electric shock or short circuit. A

Take out the 2 truss screws and remove the Front Cover

from the Accel. & Brake unit.

Loosen the screw which secures the Potentiobase, and adjust the Volume Value by moving the Base. Secure the Potentiobase. ©©® © OC Perform Volume setting in the Volume Setting Mode.

10-2 GREASING

Gror Be sure to use designated grease. Using undesignated grease can

cause parts damage.

IMPORTANT!

Once every 3 months, apply greasing to the Spring and Gear Mesh portion. For spray greasing, use GREASE MATE (PART No. 090-0066).

Page 39
  • COIN SELECTOR

HANDLING THE COIN JAM

If the coin is not rejected when the REJECT BUTTON is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.

CLEANING THE COIN SELECTOR

© The coin selector should be cleaned once every 3 months. When cleaning, follow the procedure below: Turn the power for the machine OFF. Open the coin chute door. Open the gate and dust off by using a soft brush (made of wool, etc.). Remove and cleen smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry. Remove the CRADLE. When removing the retaining ring(Ering), be very careful so as not to bend the shaft. Remove stain from the shaft and pillow portions by wiping off with a soft cloth, etc. After wiping as per #5 above, further apply a dry cloth, etc. to cause the coin selector to dry completely.

@ Never apply machine oil, etc. to the coin selector @ After cleaning the Coin Selecting,

IMPORTANT! Insert a regular coin in the normal

working status and ensure that the Selector correctly functions.

COIN INSERTION TEST Once a month, when performing the COIN SW TEST, simultaneously check the following:

O Does the Coin Meter count satisfactorily? O Does the coin drop into the Cashbox correctly?

O Is the coin rejected when inserted while keeping

the REJECT BUTTON is pressed down? FIG. lla

Insert a coin while keeping the Reject Button pressed down and check if it is rejected.

COIN METER

FIG. llc

Page 40

OPTIONAL DOLLAR BILL ACCEPTOR

@ THE COIN DOOR ASSEMBLY USED ON EMERGENCY CALL AMBU- LANCE COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION.

@ THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING VALIDATORS:

HOLE POSITION#1 Mars 2000 series (FORWARD-MOST POSITION)

HOLE POSITION#2 Mars 2000 series DBV45 (JCM)

HOLE POSITION #3 CURRENTLY NOT USED

HOLE POSITION #4 DsI01*

*The back flange on the chute can be removed for hold position #4. If the flange is not removed, it may interfere with the back of the cabinent.

The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series upstacker. A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one entry door with a cut-out for a stacker. This one entry door can be ordered through Coin Controls or one of Coin Controls authorized distributors. The part number is 91-4000-01. The Mars stacker can be obtained through an autherized Mars distibutor.

Page 41

CjO|TN| |C O|N|T/R/O|L|S G OVER/UNDER TWO

riRIN)al tENTRYCOINDOOR*

1850 HOWARD ST., ELK GROVE 1L 60007 (847) 228-1810

+ MARS SERIES 2000 UPSTACKER ADAPTABLE

PART #DESCRIPTIONCOSTPART #DESCRIPTIONCOSTPART #DESCRIPTIONCOST
1) I2-4060-KK $-10 ACCEPTOR19.5016) 91-{109-16 RRUBCT PLAP AYLOM, BLACK = 2,7028) 23-10-00 E27 OC ABTER5.50
[4150-011 S-7 US 8.252.0017) H-ALN3-O1 BNTRY/REJECT BUTTON 25e4523-03-00 4.57 OC WBTER3.50
2) AHAITT+0 PLASTIC CASBBOX7.4018) S1-L117-00 LAMPHOLDER1.402%) 90-1032-01 ABTER & LOCKOUT SCRE)
3) 20-4189-00NCLOSTRE, 2200027.5019) 91-1121-00 B/R BUTTON SPRINGA30) 22-1400-00 LOCKING BAR7.00
4) 90-1002-00 HINGE SCREP]20) SI-1118-00 GV LAMP TEDGE BASEMhSL) QO-1019-00 3/4" LOCKTASHBRB
5) 90-1003-00 CLAMP SCRETBi20) MT-1311-16 BOTTON BRZEL BLACK2.70
6) 90-1017-00 SCREV BRIEL NYLON&2) 9-1312-16 BRJECT BEZEL BLACK,2.70
7) 0-1206-02 H-40 CEP NUP3B23) 91-2125-00 12¥ LOCKOUT COLL ASSEMBLY12.85
8) 90-1300-00 KEYHOOK324) St-2216-16 MICROSTITCH ASSEMBLY6.00|
9) 91-0508-16 FRAME30.0024k) GI-LEL6-16 MICROSFITCE BLACK5.40
10) 91-0506-00 CLANPAbSE-ALIG-LL MICROSELTCH WHITE5.40
$1) 91-0547-00 DOUBLE D Call LOCK5.2SH-LL16-10 MICROSEETCH RED5.40
12) 91-0603-16 BLACK MINT DOOR5.40248) $1-1125-00 MICROSRETCH PLASTIC COVERtb
13) 91-0604-(6 2 ENTRY UPPER DOOR10.002%) 92-1002-01COIN INLET LAP STDE1.80
14) 91-1008-099 LOCKOUT BRACKET4.3026) $2-1002-21 COIN INLET COVER SIDE1.80
15) 91-1008-107 RASEPLATE ASSENBLY5.0027) 92-1002-10 HOLD DOWN BRACKET1.50

JAN. 1998 FORM 92-1003-05

Page 42
  • MONITOR

When performing such work as installing and removing the monitor, inserting and disconnecting the external connectors to and from monitor, be sure to disconnect the power connector (plug) before starting work. Proceeding the work without following this instruction can cause electric shock of malfunctioning. Using the monitor by converting it without obtaining a prior permission is not allowed. SEGA shall not be liable for any malfunctioning and accident caused by said conversion.

DEMAGNETIZER| . @® FOCUS LEAD COIL

SECONDARY SIDE a FBT Approx.

(Chassis, sheet metal work, CRT, etc.) & Disconnect or unplug 29kV

Primary side and secondary side The monitor’s circuit which is divided into the Primary side and secondary side, is electrically isolated. Do not touch the primary side and the secondary side simultaneously. Failing to observe the instruction can cause electric shock, and this is very dangerous. SECONDARY SIDE When making monitor adjustments, use a non- (Chassis, CRT) conductive driver and make adjustment without touching any other part other than the Adjustment V.R. and Knob. Also, be sure not to cause a shortcircuit to the Primary side and the Secondary side. If short-circuited, it can cause electric shock or malfunctioning, which is very dangerous.

High tension Voltage Some of the parts inside the monitor are subject to high-tension voltage in excess of 20,000 volts and very dangerous. Therefore, do not touch the monitor interior. Should soldering & paper wastes, etc. be mixed in the monitor, turn the power off so as not to cause malfunctioning or fire hazard.

) ANODE CAP PRIMARY SIDE DEMAGNETIZER REAR PART

COIL ANODE LEAD |_MAIN BD Approx. 29 kV

(black) Approx. 10 kV

Connecting the CRT and PCB For combining the CRT and PCB, use the specified part No. to maintain the status of adjustments made at the factory. The anode of the CRT itself will be accumulitavely charged as time elapses, generating high tension voltage which is very dangerous. The monitor should be used with the Chassis, CRT and PCB assembled. When repair, etc. is required at the time of malfunctioning, be sure to send it in an “as assembled” condition. If these are disassembled, what’s charged to said high tension voltage can be discharged, causing a very hazardous situation. Therefore, under no circumstances should it be disassembled.

CAUTION! Static Electricity Touching the CRT surface sometimes causes you to slightly feel electricity. This is because the CRT surfaces are subject to static and will not adversly affect the human body. Installation and removal Ensure that the Magnetizer Coil, FBT (Fly-Back Transformer), Anode Lead and Focus Lead are not positioned close to the sheet metal work’s sharp edges, etc. and avoid damaging the insulated portions so as not to cause an electric shock and malfunctioning. (For the name of parts, refer to the above figures.)
Page 43

For the purpose of static prevention, special coating is applied to the CRT face of this product. To protect the

CAUTION! coating, pay attention to the following

points. Damaging the coating film can cause electric shock to the customers. For the caution to be heeded when , clearing, refer to the Section of Periodic Aluminum Foil inspection Table. Do not apply or rub with a hard item (a rod with pointed edge, pen, etc.) to or on C.R.T. surfaces. Avoid applying stickers, seals, etc. on the C.R.T. face. Do not remove aluminum foils from the C.R.T. corners. Removing the aluminum foils can cause static prevention effects to be lowered.

Monitor adjustments have been made at the time of shipment. Therefore do not make further adjustment without a justifiable reason.

CAUTION! Adjusting the monitor which contains high tension parts is dangerous

work. Also, an erroneous adjustment can cause deviated synchronization and image fault, resulting in malfunctioning. When making adjustment, utilize a resinous Alignment Rod. Servicing with bare hands or using conductive tools can cause electric shock.

4l

Page 44

NANAO monitor: 200—5242—2 4—0 4 (24K mode)

SANWA monitor: 200-524 3-2 4 (24K mode)

CROROMCREORCEOMOCHOM”©

RGAIN GGAIN BGAIN — BRIGHT HSIZE HHOLD HPOS! SIZE VHOLD VPOSI

R-GAIN

Controls colors.

. Controls screen brightness.

. Controls horizontal screen size.

. Provides horizontal synchronization, i.e., controls right/left hold.

Controls horizontal display position on screen.

Controls vertical screen size.

Provides vertical synchronization, i.e., controls up-down hold.

Controls vertical display position on screen.

CONTRAST.... Adjusts image contrast. BOEOEOQOOSHOVO

Page 45
  • REPLACEMENT OF FLUORESCENT LAMP

@ When performing the work, be sure to turn power off. Working with power on can cause an electric shock or short circuit accident. @ The Fluorescent Lamp, when it gets hot, can cause burns. Be very careful when replacing the Fluorescent Lamp.

To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Not using a step or using an unstable step can cause violent falling down accidents.

CAUTION!

13 -1 REPLACEMENT OF FLUORESCENT LAMP

oO) Take out the 3 Tamperproof screws from

the rear of the billboard.

@ Be sure to disconnect all connectors

conected to the Marquee assembly before removing the Billboard and/or performing work.

® Take out the two screws which secure the lower billboard plate mask and remove billboard

TRUSS SCREW (3)

8-32x16 Tmpr Prf TOP SASH flat washer used

Ry

BILLBOARD

FLUORESCENT LAMP 20W, white,

local purchase

Page 46
  • PERIODIC INSPECTION TABLE The items listed below require periodic check and maintenance to retain the performance of this machine and ensure safe operation.

@ Be sure to check once a year to see if Power Cords are damaged, the plug is securley inserted, dust is accumulated between the Socket Outlet and the Power

Plug, etc. Using the product with dust as is accumulated can cause a fire or

WARNING! electrical shock. : Periodically once a year, request the place of contact herin stated or the Distributer, etc. where the product was purchased from, as regards to the interior cleaning. Using the product with dust as is accumulated in the interior without cleaning can cause a fire or short circuit accident. Note that cleaning the interior parts can be performed on a pay-basis.

Item Interval Reference

CABINETCheck Adjusters’ contact ¥ith surface.Daily
HANDLE MECHACheck Lamp.Monthly

Check VOLUME VALUE. Monthly Check ADJUST GEAR engagement. Trimenthly Greasing of GEAR. Trimonthly

AQCEL. & BRAKECheck VOLUME value.Monthly

Check ADJUST GEAR engagement. Trimonthly Gear and Spring portion greasing. | Trimonthly

SHIFT LEVERCheck switches.Monthly
COIN CHUTE TOWERCheck COIN SH.Monthly

Coin insertion test. Monthly Cleaning of COIN SELECTOR. Trimonthiv

MONTTOR Check adjustments. Monthly of shen moving,

Cleaning of CRT surfaces. Weekly

SEAT Antistatic measures Bimonthly

Applying grease to Seat Rail Trimonthly

CAME BD MEMORY TEST. Monthly 7

Check settings. Monthly 7

Cabinet surfacesCleaningAs occasion arises. | Next page
INTERTORCleaningAnnuallySee above.

POWER SUPPLY PLUG | Inspection and cleaning

CLEANING CABINET SURFACES

If the cabinet is badly stained, use a cloth which is dipped in the chemical detergent liquid diluted with water and then squezzed dry. Do not use thinner, benzine, alcohol or chemical dustcloth as the: ‘an damage Cabinet surfac

SEAT (Greasing to Seat Rail Portion) > Move the Seat to the rearmost portion and apply spray greasing to the __-, portion shown at the right once every 3 months by using NOK KLUBER L60 or GREASE MATE SEGA PART No. 090-0066. After greasing, move seat a few times forward and backward so as to allow the grease to be applied all over uniformly. Be sure to wipe grease which attaches to the surfaces of the PROTECT RUBBER on the seat Rail, or any excess grease.

Page 47
  • TROUBLESHOOTING Should trouble occur, first check connector connections.

PROBLEMS CAUSE COUNTERMEASURES

With Main SW ON, no activation Power is not supplied.

Power supply/voltage is not correct.

AC main fuse causes the power to be cut off due to momentary overload. Plug in correctly

Make sure that power supply/voltage is correct. Check fuse. Remove the cause of overload and replace fuse

Operation is unsatisfactory Volume Setting Failure

Poor mesh of V.R. gear.

Spring failure due to secular change of Accelerator and Brake Mecha. Perform Volume setting Adjust or replace V.R.

Adjust Gear mesh..

Replace the Spring.

Irregular sound emitted from inside Rear Cabinet Greasing to gear mesh portion is not satisfactory, or extraneous matter mixed in. Apply greasing or eliminate extraneous matter.

The color of the image on PROJ. screen is incorrect. Connector connections are defective. Check the connection for the RGB and SYNC connectors of the PROJ. TERM. BD and VPM BUFFER BD.

The image on PROJ. screen has color deviation. Affected by the magnetic field of installation location. Make CONVERGENCE adjustment. (Refer to Section 12.)

No sound is emitted. Sound Volume adjustment is not appropriate.

Sound BD and speaker are malfunctioning. Adjust sound volume. (see Section 7).

Perform sound test to find and replace defective parts.(Refer to Section 7).

NETWORK check will not finish. Communication cable’s connection failure. Perform V.R. setting, Adjustment.

Communication play is not possible. Communication cable’s connection failure. Communication Play setting is wrong. Check for Communication cable disconnection Correctly set in test mode.

No sound from Cockpit. In correct Cabinet Type Setting. Correct Cabinet Type Setting.

The Fluorescent lamp does not light up. The Fluorescent tube is burnt out. Replace the Fluorescent tube (Refer to Section 11).

Shift operation is not is not satisfactory in Manual transmission. Shift SW malfunctioning. Replace SW

Page 48
  • GAME BOARD
WARNING!
CAUTION!

@ In order to prevent an electrical shock, be sure to turn power off before

performing work by touching the interior parts of the product. @ Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circuit accident.

Do not expose the Game BD, etc. without a good reason. In this product, setting changes are made during the test mode. The Game BD need not be operated. Use the Game BD, etc. as is with the same setting made at the time of shipment.

16-1 REMOVING THE GAME BOARD

To replace the IC Board or to change dip switch settings, take out the IC board using the following procedure;

QO® O80 Turn main switch off.

Unlock the base, and remove the 2 truss screws from the side of the base. Turn the knob to unlock. The seat can be inclined in the direction shown. When inclining the seat, be careful not to damage seat parts. Carefully rest the backrest portion of the seat on the ground. If neccessary, protect the seat from damage by using a cloth or blanket on the floor. Take off the 3 screws to remove the case lid. The game board is inside the shield case.

Take off a total of 4 screws from both sides with the seat being in an inclined state and remove the base lid F. Removing base lid F allows the Elec Base to be seen.

TRUSS HEAD SCREW (2) / M512, black INCLINE THIS CAREFULLY.

{TRUSS HEAD SCREW(4) sy, M5X12, black SS /

Page 49

16 - 2 REPLACEMENT OF FUSE

WARNING! @ !n order to prevent an electric shock, be sure to turn power off before performing work by touching the interior parts of the product. @ Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circiut accident @ After eliminating the cause of the blowing of fuse, replace the fuse. Depending on the cause of the fuse blowing, using the fuse as is blown can cause generation of heat resulting in fire.

Incline the Seat and remove the Base Lid to view the Base interior. The composition of the Base interior is as shown below. There is a fuse on each of the Connect BD. and Motor Drive BD. When replacing the fuse, be sure to use the specified one.

FUSE 5A LOCAL PURCHASE

CONNECT BD

Page 50

16 - 3 COMPOSITION OF GAME BOARD

Ensure that the DIP SW setting is performed as designated as designated. Failure to observe thisw may cause functioning not suitable for tyhe operation, or malfunctioning.

IMPORTANT!

ASSY CASE EMERGENCY CALL AMBULANCE (998-0341)

Screw (16) W3X55, using flat & spring washers Screw (1 “TN. M3X35, using flat & ' spring washers

No. | PART No. DESCRIPTION ® | 837-12715-91 MODEL3 STEP2 CPU BOARD @ | 837-12716-91 WODEL3 STEP2 VIDEO BOARD 837-1368 WODEL3 STEP2.1 VIDEO BD @ | 834-13946-01 ROM BD ECA @® | 837-11861-91 [MODEL3 COMM BD COM

Page 51
  • DESIGN RELATED PARTS

oppisite side

D oppisite side

ITEM NO. PART NO.

DYN-OOI1 LOCAL PURCHASE 999-0841 999-0838 SPG-1201-E DYN-1214-C DYN-1214-D DYN-1214-E SPG-2002 999-0839 999-0840 999-0844 999-0843 999-0847 999-0845 999-0837 DESCRIPTION

DENOMI PLATE W/O ORIGINAL DENOMINATION SHEET 1 GAME STICKER INSTRUCTION SH ECA STICKER SUB INSTR SH ECA METER PANEL DESIGN PL TACO MTR TWIN, DESIGN PL OIL MTR TWIN DESIGN PL WATER MTR TWIN, STEERING EMBLEM STICKER MONITOR COVER L ECA STICKER MONITOR COVER R ECA STICKER MAIN BASE L ECA STICKER MAIN BASE R ECA STICKER SEAT REAR LOWER ECA STICKER SEAT REAR ECA MARQUEE PLEX ECA

Page 52
  • PARTS LIST

TOP ASSY EMERGENCY CALL AMBULANCE

ITEM NO. PART NO.

999-0852 DUTS5-0300 DRT5-1000 200-5787 INY-0004 DYN-0008 DYN-OOI1 LOCAL PURCHASE LOCAL PURCHASE 068-852216 000-T00440-0B LOCAL PURCHASE LOCAL PURCHASE 000-T004 16-0C 010-P00408-F DESCRIPTION

ASSY BILLBOARD ECA ASSY COIN CHUTE TOWER ASSY COCKPIT IP AMB CLR DSPLY 29 TYPE 31K 100V BACK LID INY BACK LID B DENOMI PLATE W/O ORIGINAL MARQUEE RETAINING PLATE 1/4-20X1 1/4” TMPR PRF SCREW FLT WSHR M8& M SCR PH W/FS BLK M4X40 HEX BLT 8/32-20X1 SPR WSHR 8/32-20X1 M SCR TH CRM M4X16 S-TITE SCR PH W/F M4X8

Page 53

ASSY BILLBOARD STD (999-0852)

ITEM NO. PART NO. DESCRIPTION

1 999-0837 MARQUEE PLEX AMBULANCE 2 999-0838 LOWER MARQUEE PLEX ECA. 3 999-0850 MARQUEE COVER L ECA 4 999-0851 MARQUEE COVER R ECA 5 999-0853 ASSY ROTATING LAMP (420705 TRILITE) ECA LOCAL PURCHASE 25W BULB 101 LOCAL PURCHASE ASSY FL 20W EX W/CONN HIGH S

Page 54

ASSY COINCHUTE TOWER (DUTS5-0300)

Page 55

ASSY COINCHUTE TOWER (DUTS5-0300)

ITEM NO. PART NO.

1 SPG1-0350 2 SPG1-0301 3 DYN-0302Y 4 DP-1167 5 BOX-CASH 10 DYN-0305 ll 105-5202 12 SPG-0302 13 SPG-0303 101 92-1003-05* 102 220-5412 103 999-0169 104 220-5574 105 220-5575 106 999-0167 DESCRIPTION

SW UNIT COIN CHUTE TOWER COIN METER BRKT TNG LKG CASH BOX TOWER BRKT HOLE COVER WIRE BOX. WIRE BOX LID ASSY C.C. 2DR MAG CNTR W/CONN CASTER 2 1/2” CAM LOCK W/KEYS CAM LOCK MASTER W/O KEY LEG LEVELER

  • This coin door is produced by Coin Controls and can be ordered through your local distributor.
Page 56

SW UNIT (SPG5-0350)

SOUND VOLUME

DEGAUSS SW TEST SW SERVICE SW

ITEM NO. PART NO. DESCRIPTION

1SPG5-0351SWITCH BRKT
101509-5028SW PB 1M
102220-5179VOL CONT B-5K OHM
103601-0042KNOB 22MM
104220-5412MAG CNTR W/CONN

105 509-5453-91-V-B ROCKER SWJ8 V-B

Page 57

AC UNIT (DRT1-0400)

TEM NO. PART NO.

SPG5-0401 600-5843-25 280-5134-6N34 509-5453-91-V-B DESCRIPTION

AC BRKT CA & PLUG ASSY 15A W/F-L=2.5M BUSHING STRAIN RELIEF 6N34 SW ROCKER J8 V-B

Page 58

ASSY MONITOR COVER R 1P (DRTS5-1045-W)

SECTION A-A

ITEM NO. PART NO. DESCRIPTION

1 DRT5-1046-W COVER PANEL R IP

Page 59

ASSY MONITOR COVER L 1P (DRT5-1030-W)

SECTION A-A

ITEM NO. PART NO. DESCRIPTION

1 DRTS5-1031-W COVER PANEL L 1P

Page 60

ASSY SPEAKER (SPG-1100)

ITEM NO. PART NO. DESCRIPTION

1 INY-1701 SPEAKER BRKT 101 130-5152 MINI DOME SPEAKER 80HM 12W

Page 61

ASSY VIRTUAL BUTTON TWIN (DRT5-1290)

ITEM NO. PART NO.

DRT-1291 171-6478B 212-5205-12 509-5560-Y 509-5561-R DESCRIPTION

VR BUTTON BRKT PC BD LIGHTING SWX5 CONN JST M 12P RTA PB SW WIL6V ILY PB SW WIL 6V 5LR

Page 62

ASSY BASE BOX (DRT1-1500)

ITEM NO. PART NO. DESCRIPTION

1DRTI-1501MAIN BASE
2DYN-2003BASE LID F
3DYN-2004LOCK TNG
4DYN-2005XFLOOR MAT
5DYN-2006HINGE 480
6DRT-1510ASSY BASELIDR
7DYN-2007XLID EDGE L
8DYN-2009XLID EDGER

101 220-5575 CAM LOCK MASTER W/O KEY

Page 63

MAIN BASE (DRT1-1501)

ITEM NO. PART NO. DESCRIPTION

1 DYN-2002X-A MAIN BASE BLANK

2999-0769STICKER BASE L
3999-0768STICKER BASE R

4 999-0167 LEG ADJUSTER BOLT 1/2X13X3

5999-0169CASTER 2 1/2"
Page 64

ASSY SEAT TWIN 1P (DRT-1600)

w-FHISET *STONO BN wo. FaIZy FOTISeTT OyT BUTUSISET TOF 310g BH

aNOUOL

Page 65

ASSY SEAT TWIN 1P (DRT-1600)

ITEM NO.

ll PART NO.

STC-1650 DRT-2202 DRT-2203 STC-2201 STC-1604 DRT-1601 DRT-1701 STC-1606 STC-1607 STC-1608 STC-1609 STC-1610 STC-1611 STC-1612 STC-1613 INY-1302-B 601-9059 601-9060 130-5159 601-6563-188 601-6563-100 280-5297 000-P00410-W 030-000816-S 050-H00800 060-S00800 000-T00616-0B 010-P00408-F DESCRIPTION

ASSY WOOFER UPPER SEAT LOWER SEAT SEAT BASE SEAT FRAME SEAT REAR COVER 1P SEAT REAR COVER 2P SEAT MOUNT TRAY SP MOUNT BRKT SPEAKER NET L SPEAKER NET R SAFETY GUARD CABLE BEAR BRKT PROTECT RUBBER SAFETY GUARD F MASK CUSHION SIDE SEAT RAIL L SEAT RAILR GULL BOX SPEAKER 800HM 5W BUSH 2.4T BUSH 2.4T SCRIVET 8 1K31 M SCR PH W/FS M4X10 HEX BLT W/S M8X16 HEX NUT M8 SPR WSHR M8 M SCR TH BLK M6X16 S-TITE SCR PH W/F M4x8

Page 66

ASSY WOOFER (STC-1650)

ITEM NO. PART NO. DESCRIPTION

1 STC-1651 WOOFER BRKT F 2 STC-1652 WOOFER BRKT R 101 130-5160 SUB WOOFER 4 OHM 30W

Page 67

(00@Z-DdS) AMVWUISTIOOV ASSV

Page 68

ASSY ACCEL&BRAKE (SPG-2200)

ITEM NO. PART NO.

SPG-2201 SPG-2202 SPG-2203 SPG-2204 SPG-2205 SPG-2206 SPG-2207 SPG-2208 SPG-2209 SPG-2210 SPG-2211 SPG-2212 SPG-2213 SPG-2214 SPG-2215 SPG-2216 SPG-2217 SPG-2219 SPG-2220 SPG-2221 100-5263 220-5484 601-7944 310-5029-F15 280-0419 028-A00304-P 020-000520-0Z 000-P00420 000-P00508-W 000-T00408-0C FAS-450005 000-P00405 FAS-000001 050-H00500 060-F00400 DESCRIPTION

BASE ACCEL PEDAL BRAKE PEDAL ACCEL SPRING BRAKE SPRING SHAFT ACCEL GEAR BRAKE GEAR NUETRAL STOPPER VR PLATE ACCEL VR PLATE BRAKE AMPL GEAR GEAR SHAFT STOPPER RUBBER CUSHION COVER VR COVER GEAR STAY WSHR NUETRAL STOPPER BEARING 12 VOL CONT B-5K OHM GEAR 15 SUMI TUBE F F 15MM HARNESS LUG SET SCR HEX SKT CUP P M3X4. HEX SKT H CAP SCR BLK M5X20 M SCR PH M4X20 M SCR PH W/FS M5X8 M SCR TH CRM M4X20 SPR PIN BLK OZ 6X10 M SCR PH M4X5 M SCR TH CRM M3X6. HEX NUT M5 FLT WSHR M4

Page 69

SCREW FASTENING TORQUE TO BE

M3: 7. Skef+cm M4: [8kgf+cm M6: S7kgf-cm M8: 178kgf-cm

R ASSY HANDLE MECHA (SPG-2500)

Page 70

ASSY HANDLE MECHA (SPG-2500)

ITEM NO.

SIYDAHAWNE

ll PART NO.

SPG-2501 SPG-2502 SPG-2503 SPG-2504 SPG-2505 SPG-2506 SPG-2507 SPG-2108 SPG-2109 SPG-2453 ASK-3502 ASK-3503 DYN-1270 SLC-1130 SPG 2454 350-5448-01 100-5112 601-8966 601-6172 601-6959 601-9173 220-5484 310-5029-F20 DESCRIPTION

HANDLE BASE BASE LID HANDLE SHAFT PULLEY 20 S5M PULLEY 60 SSM MOTOR BRKT VR BRKT STOPPER BOLT STOPPER RUBBER KEY 4X4X40 MOTOR SPACER MOTOR COLLAR STOPPER KEY ADJUST RING MOTOR SHAFT COLLAR SERVO MOTOR 500W NEW. BEARING 17 GEAR HOLDER GEAR 48 GEAR 64 TIMING BELT VOL CONT B-5K OHM SUMITUBE F F 20MM

Page 71

ASSY SHIELD CASE (DRTS5-4600-01)

ITEM NO. PART NO. DESCRIPTION

1 105-5245X SHIELD CASE MODEL 3 NVS 2 105-5242X SHIELD CASE LID MODEL 3 3 839-0932 FILTER BD MODEL 3 4 998-0130 GAME BD ECA 101 260-0064 FAN MOTOR DC 12V

Page 72

ASSY ELEC BASE (DRT1-4500)

ITEM NO. PART NO. DESCRIPTION

1DRT-4501WOODEN BASE ELEC

2 838-12912-01 SERVO MOTOR DRIVE BD NEW

3838-11651-91LOWPASS AMP
101560-5393XFMR 100V 8Ax2 WB

102 839-0977-02 SSR BD 3

103838-12898DRIVE BD DUT
104838-13475PWR AMP 4 CH MIXER
NOTE: THE ELEC BASE MAY APPEAR DIFFERENT FROM PICTURE GIVEN ABOVE PLEASE CONTACT

SEGA CUSTOMER SERVICE FOR ASSISTANCE. Contact information is located on the rear cover of manual.

Page 73

ASSY MAIN BD BASE (DRTS5-4400)

ITEM NO. PART NO. DESCRIPTION

1 DRT-4401 WOODEN BASE

2DRT5-4600-01ASSY SHIELD CASE ECA

3 105-5241 SHIELD CASE BRKT

5105-5319CONNECTOR PANEL BRKT
101400-5330-02-91SW REGU FOR MODEL 3
Page 74

ASSY COCKPIT 1P (DRT1-10001)

= oa Ss S a

Details of PART B

107)(108)(06)(07)

Page 75

ASSY COCKPIT 1P (DRT5-10001)

ITEM NO. PART NO. DESCRIPTION

1DRT5-20001ASSY MAIN BASE 1P
2DRTS5-1030-WASSY MONITOR COVER L IP.
3DRTS5-1045-WASSY MONITOR COVER R IP.
4DRT5-1201-ECA.ASSY CONTROL PANEL ECA
5SPG-1004MONITOR STAND
6SRT-1002WIRE COVER BOX
7INY-1016MONITOR SUPPORT

8 SPG-1008 ROOF LID

9TTR-1067XMONITOR MASK
10SPG-1005MASK HOLDER
llDYN-1025RUBBER CUSHION
12INY-1015CRT ADJUST PANEL

101 200-5787 ASSY CLR DSPL 29 TYPE 31K 100V

105280-5112BUSH FOR TV
106280-5113COLLAR FOR TV
107280-5114SPACER 6.4-25x2
108280-5185-6SPACER TUBE L=6
109601-6231-C100EDGING NEW TYPE
Page 76

ASSY CONTROL PANEL (DRT1-1200-02)

ITEM NO. PART NO. SCRIPTION

1SPG-2001STEERING WHEEL
2DYN-1209XHANDLE COLLAR
3SPG-2002STEERING EMBLEM

4 DRT-1202 CONTROL PANEL COVER ENG

5SPG-1205CONTROL PANEL BRKT
6INY-1204SHIFT COVER INY
7DYN-1223XSHIFT COVER B
8SPG-1203FAN BRKT
9LMN-1202SHIFT BASE
10SPG-2500ASSY HANDLE MECHA
ll610-0384UP/DOWN SHIFTER AL

12 DRT-1290 ASSY VIRTUAL BUTTON TWIN

13SPG-2039SPACER RING
14601-8543FAN GUARD

101 260-0011-02 AXIAL FLOW FAN AC 100V 50-60HZ

Page 77

ASSY MAIN BASE IP (DRT5-20001)

N8_195kgf-cm

TORQUE: M6 84kgf+cm

Page 78

ASSY MAIN BASE IP (DRT5-20001)

ITEM NO.

ve

AunAW PART NO.

SRT-1500 SRT-1600 SRT-1700 SPG-2200 SRT-4400 SRT-4500 SRT-0400-01 SPG-0700 SPG-1502 RAL-2007 RAL-2008 SPG-1503 260-0011 600-6275-0150 DESCRIPTION

ASSY BASE BOX ASSY SEAT TWIN IP ASSY SEAT TWIN 2P ASSY ACCEL&BRAKE ASSY MAIN BD BASE ASSY ELEC BASE AC UNIT MAIN EXP (1P) AC UNIT SUB (2P) PEDAL BASE RUBBER HOLDER R TWIN RUBBER HOLDER L TWIN FAN BRKT AXIAL FLOW FAN AC100V 50-60 HZ ASSY FIBER CABLE 5 0150CM.

Page 79

VISIT OUR WEBSITE!

Netscape: SEU SERVICE HOMEPAGE

[¥2K COMPLIANCE]

Sega Enterprises Inc.,USA Service Department Phone (650)-632-7580 Fax (650)-632-7594

Best Viewed with Ay what’s Related [What's new] [Manuals] [Bulletins] [Part Numbers] [Game Monitors], [Board Systems] [Mailing List] [SEGA Distributors] [Service Staff] [Dar i's Office] [Samples]

Coin-Op Links:

Star Tech Journal

Amusement industry Mega Site

if you have any questions about this Home Page please E-Mail to:

dari.davidson@seu.sega.com OR han.rockhili@seu.sega.com

A total of 3910 people have accessed this page.

THIS WES SITE POWEREO BY

Page 80

SEGA

SEGA ENTERPRISES, INC. (USA)

45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax