CATHODE RAY TOMES

Street Fighter The Movie

Street Fighter: The Movie (v1.12) (Capcom / Incredible Technologies, 1995) · Manual · 26 pages · 29 sections · original scan

Page 1

"ONI ‘4O-NIOO Mk Ke 2M KOR $6/S_ LIN-0ZF00Nd TVWNNVW S.YOLVHadO HIE HE HE HK HE HE HH He He i CH hc $e HK HIE IE IE HE HE HEHE IE HE IC IEE HE CE HE HIE HCP EE EC

Page 2

GAPEEM* coin-op, Inc. STREET FIGHTER : THE MOVIE™

THANK YOU FOR PURCHASING STREET FIGHTER : THE MOVIE™. CAPCOM@ INVITES YOU TO USE THE FOLLOWING MAILING ADDRESS, TELEPHONE OR FAX NUMBER FOR PARTS OR SERVICE INFORMATION CONCERNING THIS GAME:

CAPCOM® COIN-OP, INC. ATTN: FIELD SERVICE - VIDEO PRODUCTS 3311 N. KENNICOTT ROAD ARLINGTON HEIGHTS, ILLINOIS 60004 PHONE: (708) 797-6100 FAX: (708) 797-6306

THE SERIAL NUMBER OF YOUR GAME IS LOCATED ON THE PRINTED CIRCUIT BOARD SET AND STARTS WITH THE PREFIX SFM (Ex. SFM10001).

PLEASE HAVE THIS SERIAL NUMBER AVAILABLE WHEN CONTACTING US FOR SERVICE INFORMATION.

F B WARNING

Federal law provides severe civil and criminal penaities for the unauthorized reproduction, distribution, or exhibition of copyrighted audiovisual works and video games.

The Federal Bureau of Investigation investigates allegations of criminal copyright infringement.

Proprietary and confidential information, not to be disclosed or copled without the express permission of CAPCOM® COIN. OP, INC.

Page 3

CGNPEONI coin-op, Inc. STREET FIGHTER : THE MOVIE™

TABLE OF CONTENTS

Warranty Information

Kit Inspection and Installation

Test Mode Operator Adjustables Menu Game Mode Selection Game Resets Attract Mode Sounds Credit Settings Violence Settings Skill Level Adjustment : Horizontal Screen Adjustment Game Audits Menu Review Audits Reset Audits System Tests Menu Video Screen Test Sound Test GROM Checksum Test Video RAM Test Player Control Test Volume Settings Palette RAM Test Notes

General Troubleshooting Power-up Problems Conwol Problems Video Problems Sound Problems

Auxiliary JAMMA Cable Connections

Main JAMMA Harness Connections

Dip Switch Settings

Diagnostic Switch Settings

Fuse Information

Page 4

CAPE" coin-op, Inc. STREET FIGHTER : THE MOVIE™ ee

LIMITED PRODUCT WARRANTY (APPLIES TO DOMESTIC SALES ONLY)

CAPCOM (Seller), warrants only to the initial purchaser of its products, that the items listed below are free from material and workmanship under normal use and service for the warranty periods specified:

A. Printed Circuit Boards: (90) days B. Electronic and Mechanical Components: (90) days

No other part of Seller's products are warranted.

Warranty periods are effective from the initial date of shipment from seller to its authorized distributors.

Seller's sole liability shall be, at its option, to repair or replace products which are returned to Seller during the warranty periods specified, provided:

A. Seller is notified promptly upon discovery by buyer that stated products are defective.

B. Such products are properly packaged and then returned, prepaid to Seller's designated plant.

This warranty does not apply to any parts damaged during shipment or handling, or due to improper installation or alteration. In no event shall Seller be liable for any anticipated profits, loss of profits, loss of use, incidental or consequential damages or any other losses incurred by the customer in connection with the purchase of a CAPCOM® product.

WARRANTY DISCLAIMER

EXCEPT AS SPECIFICALLY PROVIDED IN A WRITTEN CONTRACT BETWEEN SELLER AND PURCHASER, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IMPORTANT NOTICE

THIS SHIPMENT HAS BEEN CAREFULLY INSPECTED AND PROPERLY PACKAGED BEFORE LEAVING THE FACTORY. WE CANNOT ASSUME RESPONSIBILITY FOR BREAKAGE THAT MAY OCCUR DURING TRANSPORTATION OF THE GAME. IF THIS GAME IS DAMAGED UPON RECEIPT FROM THE CARRIER, IMMEDIATELY NOTIFY THE CARRIER AND FILE A DAMAGE REPORT.

Page 5

® GNRGON coin-op, Inc. STREET FIGHTER: THE MOVIE™

KIT INSPECTION

The STREET FIGHTER: THE MOVIE™ Kit is used to convert or update older video games to the newest version of this popular game. Open the packing carton and remove the parts. Check that all parts are in the kit. If any parts are missing or damaged, contact your distributor.

Kit Parts List

Part No. Description Qty. GE2030 Joystick (4/8 way) 2

A-0016500Complete Game PCB Set1
LBO0128Label, Notice, FCC Compliant1
LBOO131Label, Game Features1
PMO00120-KitManual, Operator1
SC001 19-04Screw #8 x 1/2 SLHWH “AB” ZC6
16-0130Switch, Push-button Micro, |-Player, White1
16-0131Switch, Push-button Micro, 2-Player, White1
16-0133Switch, Push-button Micro, Red4
16-0134Switch, Push-button Micro, Blue4
16-0136Switch, Push-button Micro, Green4
AW00144Marquee1
AW00145-1Overlay, Control PanelI
AW00146Decal, 6-Button and Joystick1
C-00144-7Cable Assy, JAMMA Auxiliary1
PMOO121Template, control panel Drill Hole1

KIT INSTALLATION

Z1\, WARNING:

MAKE SURE THAT ELECTRICAL POWER TO THEGAME IS OFF PRIOR TO STARTING THE KIT INSTALLATION.

Old Component Removal

  • Disconnect and remove the old printed circuit board(s) from the cabinet.
  • Remove or open the control panel, and disconnect and remove the buttons and joystick(s) from the control panel.
  • Remove any covering from the control panel overlay, and then remove the control panel overlay. Preparation:
  • Place the PM00121 joystick and button template supplied in your kit over the control panel to determine where any new holes should go. Center punch any needed new holes on the control panel.

2 Cut out the new holes.

  • If there is an additional control panel cover (such as plastic or lexan) that will be utilized, cut any additional holes using the same template.
  • Plug up unused holes with a wood dowel (1-1/8" diameter) and sand any rough edges.

Proprietary and confidential information, not 0 be disclosed or copied without the express permission of CAPCOM® COIN.OP. INC. Pagel

Page 6

J CNBR coin-op, INC.

Control Panel Overlay Installation:

  • The contro! panel overlay in the kit is oversized to accommodate most control panel sizes. Center the overlay on the control panel, leaving some excess material at the edges.
  • Remove the protective backing from the overlay and press it down on the control panel, keeping it properly aligned. Press it down firmly, smooth out any bubbles, and press it over the edges.
  • Trim any excess from the overlay. Place the drill hole template on top of the overlay, aligning it with the joystick holes. Pierce through the overlay at each control panel hole. Then, cut away overlay material covering the joystick and button holes. Cut out holes for the Player | and Player 2 Start buttons. Remove the template and clean off the overlay.
  • Peel off the backings of the 6-button and joystick decals AW001 46, align over the control panel holes, and press in place on the overlay.

Replace the control panel plastic. See Figure 1.

FIGURE 1 Overlay Installation

Plastic

Decal

Overlay

Control Panel

Marquee Installation

  • Remove the marquee glass, old marquee overlay, and the old cabinet graphics.
  • Install the new marquee graphics and replace the glass.

Page 2 STREET FIGHTER: THE MOVIE™

Wiring and Harness Assembly

NOTE: All switch wires used in this game must be wired to the normally-open connection on the switches. Each switch requires a ground wire on the common connector and the appropriate control or switch wire on the normallyopen connector of the switch.

Buttons and Joysticks

  • Install all buttons and retaining rings on the control panel as shown in Figure 2. Install two RED buttons to the immediate right of each joystick, install two BLUE buttons to the right of the red ones, and install two GREEN buttons to the right of the blue ones.

FIGURE2 Control Panel Buttons and Switches

Control Panel

Buttons

i Retaining SS y Rings es Switches FF ce

  • Notice that there are two white buttons. (See Figure 3.) Install the PLAYER ONE button on the top left-hand side of the control panel, and the PLAYER TWO button on the top right-hand side of the control panel. The WHITE buttons are START buttons.

FIGURE 3 Function and Start Buttons

2 Player 1 Player

Proprietary and confidential information, not to de disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 7

tJ CGAP@ONT coin-op, Inc. STREET FIGHTER: THE MOVIE™

  • Install the switches on the buttons as shown in Figure 2. Orient the switches so that when a button is pressed, the red contact on the switch is depressed.
  • Install the joysticks on the control panel as shown in Figure 4. FIGURE4 Joystick Installation
  • Connect the FIERCE, SHORT, and FORWARD button switches to the JAMMA auxiliary cable shown in Figure 5. Connect the JAMMA auxiliary cable leads (female spade) to the FIERCE, SHORT, and FORWARD control panel button switches as shown In the following chart. PLAYER No. 1 PLAYER No.2

Button wire color Button wire color

FIERCE White-Violet FIERCE _ Violet-Black

SHORT White-Gray SHORT Violet-Gray

FORWARD _ White-Black FORWARD Violet-White

The Black lead goes to the switches’ ground connection, and the red and green leads are for speaker connections.

  • Install the other ends of these wires into the game's original JAMMA wiring hamess connector as shown in Figure 6.

FIGURE 6 JAMMA Connector

VIO/BLK VIO/GRY VIO/WHT

FIGURES JAMMA Auxiliary cable

To SOUND PCB

To JAMMA, CONNECTOR Ig Press the pins into pin locations b,c, and d, and 24, 25, and 26, from the backs of the connector's pin openings. Follow the wire colors shown in Figure 6.

  • Connect the remaining buttons and the joysticks To to the original JAMMA harness according to the wiring Pustirones. | chart shown in this manual.

Proprietary and confidential information. not (0 be disclosed or copied without the express permission of CAPCOM® COIN-OP. INC. Page 3

Page 8

CAPCOM coin-op inc. STREET FIGHTER: THE MOVIE™

Printed Circuit Board These outputs connect directly to the left and right speakers.

  • Mount the PCB to the cabinet in the space where the old The connectors are keyed. Be sure they are mounted correctly. PCB was mounted. Mark and drill pilot holes. Attach the

PCB standoffs to the cabinet using wood screws and spacers. ZB WARNING:

Do not overtighten the screws or the board may warp or crack. - .

Plugging the JAMMA connector in backwards will cause Wire Harness damage to the PCB.

  • Attach the kit wire hammess connectors to the new PCB as shown in Figure 6. Notice that the 3-pin connector goes to NOTE: JP12. This game requires a JAMMA standard wiring harness. If your original game does not are use a JAMMA harness, you FIGURE 6 should change to one. Kit Wire Harness PCB Connections

Audio Level

Audio output level is changed by going to Test Mode and adjusting Volume Level setting.

Label Instructions

There are two stick-on labels that come with the kit. LB00128 is an FCC Compliance Notice Label. Peel off the backing from the sticker and apply it to the back of the game, as shown in Figure 7. LBO0131 is a Game Features Label that goes on the monitor bezel or on the control panel. Peel off the backing and apply the sticker to either of the locations shown in Figure 7.

JAMMA iM aL) Hi

i CONNECTION FIGURE7

i Sticker Locations

P12 Connections wire color Pin | - Player | RoundHouse Wht GAME FEATURES Pin 2-Ground Bk (LoeaTiOn QL ven Pin 3 - Player 2 RoundHouse Vio ihe ABEL (See Pinout Table)

P53 Speaker connections wire color Pin 1 -L(+) Red/Gry Pin2-L(-) RedBIk Pin3-R(+) GmvGry Pin 4-R(-) GmBk (See Pinout Table)

Jl and J2 are low-level stereo audio outputs. If used, they require amplification or an amplifier board.

Page 4 Propnetary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 9

GAPR@ON coin-op, INC.

TEST MODE

To enter the Test Mode. press the Test Button, located just inside the coin door. When the Test Button is pressed or DIP Switch | is flipped to the OFF position, the screen displays the Main Service Menu.

NOTE If you used the DIP switch to enter the TEST MODE, you will need to flip the DIP switch back to the ON position in order to return to the game.

STREET FIGHTER V1.00.

JOYSTICK UP AND DOWN TO SELECT. PRESS START TO: CHOOSE

MAIN SERVICE MENU

ExT

OPERATOR ADJUSTABLES MENU

GAME AUDITS MENU

SYSTEM TESTS MENU:

MAIN SERVICE MENU

The Main Service Menu allows you to enter into three different areas,

OPERATOR ADJUSTABLES is used for customizing your game for your location. Some of the features in Operator Adjustables are number of coins per game, sounds on or off when no one is playing, difficulty settings. etc.

GAME AUDITS allow you to check your games’ overall earnings, game times, game scores, etc. The Audits can be reset through this menu as well.

SYSTEM TESTS verifies the operation of the hardware, controls, and monitor through easy and automatic procedures accessed through these menus. To exit any of these tests and return the game to its normal state, use any player joystick to highlight the line that says EXIT and press any player start button. STREET FIGHTER : THE MOVIE™

COLOR KEY NOTE

For easy identification, all test screens have been color-coded. Items displayed in GREEN are the MENU wdes. This is the name of the menu that is currently displayed. [tems appearing in YELLOW are the menu’s instructions. The BLUE items are choices available in this menu. The WHITE item is the selection that is currently highlighted. If RED is ever displayed, there is a problem with that item and it should be corrected.

OPERATOR ADJUSTABLES

The Operator Adjustables section is accessed through the main service menu. From the Main Service Menu, move any player joysuck down until the word OPERATOR ADJUSTABLES MENU appears in white letters. Now press any player start button, and the Operator Adjustables Menu will appear on the screen.

STREET FIGHTER V1.00.

JOYSTICK UP'AND DOWN TO SELECT. PRESS START TO CHOOSE

OPERATOR ADJUSTABLE MENU

EXIT ADJUSTABLES

GAME MODE SELECTION

GAME RESETS

VOLUME SETTINGS:

ATTRACT MODE SOUNDS:

CREDITS SETTINGS

MIOLENCE SETTINGS

SKILL LEVEL ADJUSTMENT.

HORIZONTAL SCREEN ADJUSTMENT

OPERATOR ADJUSTABLES MENU There are many possible customizing procedures available with the game. Below is a brief description of each adjustable function and what the screen looks like when displayed. Remember, to select an item trom any menu, use any player joystick to highlight the item in white. and then press any player start button.

Proprietary and confidential information, not to be disclosed oF copled witout the express permission of CAPCOM® COIN-OP, Page 5

Page 10

CANP@ONI*coIN-oP, INC.

STREET FIGHTER : THE MOVIE™

Game Mode Selection

This menu allows you to place the game in standard Coin Mode, or choose tree play.

STREET FIGHTER V1.00.

JOYSTICK UP AND DOWN:TO SELECT.

PRESS START TO CHOOSE

GAME MODE SELECTION

COIN MODE

FREE PLAY

GAME MODE SELECTION SCREEN

In COIN MODE, the game will only work if coins are deposited into the game.

In FREE PLAY, coins are not needed for play and the Start buttons are always active.

GAME RESETS

The Game Resets Menu will cancel or zero-out any custom features or bookkeeping figures that are no longer wanted.

STREET FIGHTER V1.00

JOYSTICK UP AND: DOWN TO SELECT. PRESS START TO: CHOOSE

GAME RESETS:

EXIT RESETS.

RESET ALL TO FACTORY SETTINGS

RESET HIGH SCORES ONLY

RESET AUDITS ONLY RESET ALL TO FACTORY SETTINGS will change the game back to the game was pre-set when new. Any custom lures, such as Free Play and Skill Levels, will be changed back to the original settings set at the factory.

RESET HIGH SCORES ONLY is used to erase all of the high scores stored in memory.

RESET AUDITS ONLY is used when all of your bookkeeping and statistics have been gathered from the Audits section and are no longer needed. If you like to gather all of your accounting information each week or after each collection, it is a good practice to reset all of the audits so your coin count will match the audit information.

ATTRACT MODE SOUNDS

This menu is used to adjust the sounds that are heard while the game is is not being played.

STREET FIGHTER V1.00:

JOYSTICK UP AND DOWN TO SELECT. PRESS START TO CHOOSE:

ATTRACT MODE SOUNDS

ALL ATTRACT MODE SOUNDS OFF

OCCASIONAL ATTRACT MODE SOUNDS

ALL ATTRACT MODE SOUNDS ON

ATTRACT MODE SOUNDS MENU

ALL ATTRACT MODE SOUNDS OFF will not allow any sounds to be played during the attract mode.

OCCASIONAL ATTRACT MODE SOUNDS plays sounds about every ten to twelve times the attract mode is repeated.

ALL ATTRACT MODE SOUNDS will play sounds during every attract cycle.

Page 6 Proprietary and confidential Information, not to be disclosed or copled witout the express permission of CAPCOM® COIN-OP, INC.

Page 11

GANPEENI* coin-op, INC.

STREET FIGHTER : THE MOVIE™

CREDITS SETTINGS

This menu allows you to change the number of coins needed to play the game.

STREET FIGHTER V1.00

MOYSTICK UP AND DOWN TO SELECT. PRESS. START TO CHOOSE

CREDIT SETTINGS.

EXIT CREDITS AND PLAYING TIME.

DOOR } CREDITS PER COIN

DOOR 2 CREDITS PER COIN

CREDITS NEEDED: TO START

GREDITS NEEDED TO CONTINUE

TO CHANGE VALUES MOVE JOYSTICK LEFT TO DECREASE.

MOVE JOYSTICK RIGHT TO INCREASE

CREDIT SETTINGS SCREEN

You can set each coin door at different credit values by highlighting: DOOR 1 CREDITS PER COIN for coin door 1 or DOOR 2 CREDITS PER COIN for coin door 2. Moving the Player | joystick left or right will change the number of credits that each coin represents.

CREDITS NEEDED TO START will adjust the number of credits it takes for a player to begin a game. For example, the factory setting is | coin per credit but it takes 2 credits to begin a game. Therefore. two coins are needed to begin a game. If you want the number of credits needed to continue a game already in progress to be different than the number of credits needed for the initial game start. you can set the new value using CREDITS NEEDED TO CONTINUE.

VIOLENCE SETTINGS

Street Fighter: The Movie™ allows for a “no violence” setting or, if violence is desired, changing the various violent elements of the game. STREET FIGHTER V1.00

JOYSTICK UP AND DOWN TO SELECT. PRESS START TO CHOOSE

VIOLENCE SETTINGS

FULL VIOLENCE

NO BLOOD:

BLOOD ONLY:

NO VIOLENCE

VIOLENCE SETTINGS SCREEN

SKILL LEVEL ADJUSTMENT

STREET FIGHTER : THE MOVIE™ allows for changing the level of skill needed to play the game. This feature is good for locations with younger or novice players who are less skilled at the game or accomplished players who demand a greater challenge.

STREET FIGHTER V1.00

JOYSTICK UP AND DOWN TO SELECT. PRESS. START FO CHOOSE

SKILL LEVEL ADJUSTMENT

‘SKILL LEVEL 1 -EASIEST

SKILL LEVEL 2

SKILL LEVEL 3

SKILL LEVEL 4

SKILL LEVEL 5. “HARDEST

SKILL LEVEL ADJUSTMENT SCREEN

To set the game to an easy skill level, highlight “SKILL LEVEL 1 - EASIEST’; to set the game to a difficult skill level, highlight "SKILL LEVEL 5 - HARDEST”. Skill levels 2, 3. and 4 are settings that should be adjusted gradually over a period of time.

Proprietary and confidential information. not to be disclosed or copled witout the express permission of CAPCOM® COIN-OP, INC. Page 7

Page 12

GAPEENI* coin-op, INC.

HORIZONTAL SCREEN ADJUSTMENT

If for some reason the picture is not centered properly on the screen, use this menu to correct the problem.

STREET FIGHTER V1.00.

JOYSTICK UP ANE DOWN TO SELECT, PRESS START TO. CHOOSE

HORIZONTAL SCREEN ADJUSTMENT

SCREEN ADJUST ~ + LEFT MOST:

SCREEN ADJUST - 2

SCREEN ADJUST «3. CENTER

SCREEN ADJUST +4

SCREEN ADJUST - 5 RIGHT MOST.

HORIZONTAL SCREEN ADJUSTMENT SCREEN

SCREEN ADJUST-1 LEFT MOST will move the picture far to the left.

SCREEN ADJUST-3 CENTER will attempt to center the picture on the monitor.

SCREEN ADJUST-5 RIGHT MOST will move the picture far to the right. STREET FIGHTER : THE MOVIE™

GAME AUDITS

The Game Audits section will supply you with a detailed accounting of helpful and informative bookkeeping and statistics. To enter the Audits section, first go to the Main Service Menu by pressing the test switch located just inside the coin door of the cabinet or DIP switch | to the OFF position on the PCB. From the Main Service Menu, move the Player 1 joystick down until the phrase GAME AUDITS MENU appears in white letters. Now press any player start button and the Game Audits menu appears on the screen.

STREET FIGHTER V1.00

JOYSTICK UP AND DOWN:TO SELECT. PRESS START TO CHOOSE

GAME AUDITS MENU

EXIT: AUDITS

REVIEW AUDITS

RESET AUDITS.

GAME AUDITS SCREEN

To look at the current statistics, highlight the REVIEW AUDITS and press any player start button.

To set all the statistics back to zero, highlight RESET AUDITS and press any player button.

REVIEW AUDITS

When you choose to review the audits, a series of four Audits Review Screens will appear. These are read-only screens that do not require the operator to make selections. By pressing any player start button, Audit Screen | will exit to Audit Screen 2. By again pressing the player start button. Audit Screen 2 will exit to Audit Screen 3, After reviewing Audit Screen 3, the operator may then access Audit Screen 4 by pressing the player start button. Finally. Audit Screen 4 will exit to the Game Audits Screen by again pressing the player start button.

Page 8 Proprietary and confidential information, not to be disclosed or copied witout the express permission of CAPCOM® COIN-OP, INC.

Page 13

@ANPEONI* coin-op, INC. STREET FIGHTER : THE MOVIE™

STREET FIGHTER V1.00 STREET FIGHTER Vt.00

PRESS START TO CONTINUE PRESS START TO EXIT

REVIEW AUDITS SCREEN 1 REVIEW AUDITS SCREEN 3.

COIN DOOR 1 - COINS AVERAGE GAME TIME XXX SEC. CQIN DOOR 2 = COINS: TOTAL NUMBER OF TIMES. CHARS PICKED. RYU XXX TOTAL COINS: VEGA.

GUILE SAGAT KEN.

GAMES STARTED VS. COMPUTER Ene GAMES CONTINUED: SAWADA

GAMES STARTED VS. COMPUTER:

GAMES COMPLETED:

TOTAL TAG TEAM GAMES.

TAG GAMES COMPLETED

AUDITS REVIEW SCREEN |

AUDITS REVIEW SCREEN 3

STREET FIGHTER V1.00

PRESS START TO EXIT

REVIEW AUDITS SCREEN 4

SECRETS FOUND AUDIT

SECRET SECRET 2 SECRET 3 SECRET 4 SECRETS SECRET 6 SECRET 7 SECRETS SECRET 9 SECRET it SECRET 12 SECRET 13 SECRET 14 SECRET 15 SECRET 16.

OYSTICK LEFT OR RIGHT TO MOVE SCREEN,

AUDITS REVIEW SCREEN 4 AUDITS REVIEW SCREEN 2

Proprietary and confidential Information, not to be disclosed or copled witout the express permission of CAPCOM® COIN-OP, INC. Page 9

Page 14

CAPCOM" coin-op, Inc. STREET FIGHTER : THE MOVIE™

RESET AUDITS

When you choose to reset the audits, use the Game Resets Screen and select RESET AUDITS.

STREET FIGHTER ¥1.00

JOYSTICK UP AND DOWN TO SELECT. PRESS START TO CHOOSE

RESET AUDITS.

NO RESET AUDITS:

RESET AUDITS:

GAME RESETS SCREEN

If you wish to reset all of the game audits (described above) to zero, highlight RESET AUDITS from this menu and press any start button. The screen will briefly display AUDIT RESET.

If for some reason you wish to undo the RESET AUDIT function before you have left the the GAME RESETS SCREEN, highlight NO RESET AUDITS and press any player start button. This action allows you to exit the screen without having cleared the current audit values.

Page 10 Proprietary and confidential information, not to be disclosed or copled witout the express permission of CAPCOM® COIN-OP, INC.

Page 15

CAPEENI* coin-op, INC. STREET FIGHTER : THE MOVIE™

SYSTEM TESTS

If you are experiencing any problems with the operation of. the game, the System Tests are an excellent troubleshooting tool. To enter the System Tests section. first go to the Main Service Menu by pressing the test switch located just inside the coin door of the cabinet, or set DIP switch | on the PCB to the OFF position. From the Main Service Menu, move any player joystick down until the phrase SYSTEM TESTS MENU appears in white letters. Now press any player start button and the System Tests Menu will appear on the screen.

STREET FIGHTER Vt.00:

JOYSTICK UP AND DOWN TO SELECT. PRESS START TO CHOOSE

SYSTEM TESTS MENU

EXIT: TESTS

VIDEO: SCREEN TEST

SOUND TEST

GROM CHECKSUM TEST

VIDEO RAM TEST

PLAYER CONTROL TEST

VOLUME SETTINGS

PALETTE RAM TEST

SYSTEM TESTS MENU

VIDEO SCREEN TEST

You can test your monitor and adjust colors by choosing VIDEO SCREEN TEST and pressing any player start button.

Proprietary and confidential Information, not to be disclosed or copied witout the express permission of CAPCOM® COIN-OP, INC. STREET FIGHTER: V'1.00

VIDEO SCREEN TEST

TQ VIEW VIDEO TEST SCREENS MOVE JOYSTICK UP OR DOWN:

PHESS START AT ANY SCREEN TO EXIT

FOLLOWING SCREENS ARE AVAILABLE:

-COLOR ADJUSTMENT -SCREEN GRID PATFERN -RED SCREEN -GREEN SCREEN: -BLUE SCREEN -WHITE SCREEN.

VIDEO SCREEN TEST MENU

When a player joystick is moved up or down, the screen changes to display a grid of colored rectangles. Use these colors as a guide and adjust your monitor so they look as good as possible. This test can be exited at any time by pressing any player start button.

SOUND TEST

Choose SOUND TEST from the System Test Menu to test the sounds and speakers in the game.

STREET FIGHTER V1.00

JOYSTICK UP: AND DOWN TO SELECT. PRESS START TO CHOOSE

‘SOUND TESTS.

EXIT SOUND TESTS:

SsROMO “FEST

SROM } <TEST

SROM 2 -TEST

ROMO ~DAUMS

BACKGROUND MUSIC 1

BACKGROUND MUSIC 2

DISPENSE t TICKET.

COIN METER TEST.

,TEST ALL SQUND ROMS:

Page 11

Page 16

GANFEENI* coin-op, Inc.

To test the coin meter, choose COIN METER TEST from this menu. Each ume the player start button is pressed, you should observe the coin meter (located inside the coin box) incrementing.

GROM CHECKSUM TEST

Choose GROM CHECKSUM TEST from the System Test Menu to test the graphics chips on the PCB. This test performs a complete test of the graphic ROM’s. While the test is in progress, the following message is displayed:

RUNNING GROM CHECKSUM TEST: 96 SEC TO. FINISH

GROM TEST SCREEN (Test in Progress)

When the test is completed, the GROM Test Screen is displayed:

STREET FIGHTER V1.00

GROM CHECKSUM TEST:

SOCEQODEE 2ODOCIOX JOODDOCK KARDON SOOO KIDDO: ODOC XXXAXONC OOORKXK, OOOO XOKIOOK OKI, OODDOCK KAIOODDK XIEGOOONE, DOGGONE OOOO KXGODUDOS OCKKGOOOL 2G YOGOOBOK. KHQQOIONK TODA, JOOOTIOK YERCOOK XHOCQION OOOO KIGDOCOK TRKIIOOOK OOCCONE JOXIOOKKK KAIOOOIK, JOCRQO00: OOUCECOE J00000GK JECODDON:

‘GROM CHECKSUM TEST (PASSED/FAILED):

GROM TEST SCREEN (Test Completed)

Ll) If all checksums are shown in blue, the test passed and the game is in good working order.

Page 12 STREET FIGHTER : THE MOVIE™

  • If any checksums are bad, they will displayed in red text on this screen. This means that the GROM is defective and needs to be replaced. Call your distributor for further help.
  • To exit this test, press any player start button.

VIDEO RAM TEST

This test performs a complete test of the Graphics video RAM. The video RAM is tested in two pages. The following message will be displayed as each page is tested:

RUNNING VIDEO RAM TEST, XOOXXX PAGE

RAM TEST SCREEN (Test in Progress)

When the test is completed, the results will be displayed as follows:

STREET FIGHTER V1.00

VIDEO RAM TEST

VIDEO RAM FIRST PAGE STATUS =0000

VIDEO RAM SECOND PAGE STATUS =0000.

MIDEO-RAM TEST [PASSED/FAILED}

PRESS STAAT TOEXIT

PRESS JAB TO LOOP TEST

VIDEO RAM TEST SCREEN

0} [f the game passes this test, zeros will be displayed in white along with a VIDEO RAM TEST PASSED message.

  • If the test fails, a non-zero status and VIDEO RAM TEST FAILED message will be displayed inred. Call your distributor for further assistance.
  • To exit this test, press any player start button.

Proprietary and confidential Information, not ta be disclosed or copled witout the express permission of CAPCOM® COIN-OP. INC.

Page 17

CARON coin-op, Inc. STREET FIGHTER : THE MOVIE™

PLAYER CONTROL TEST STREET FIGHTER V1.00. Choose PLAYER CONTROL TEST from the System Test Menu to test the switches and controls of your game cabinet. TO EXIT PRESS START t

STREET FIGHTER Vt.00

FO EXIT PRESS START 1 AND START 2

ofa JOYSTICK UP INCREASES VOLUME JOYSTICK DOWN DECREASES VOLUME

PLAYER CONTROL TEST SCREEN (6-Buttons)

VOLUME SETTINGS SCREEN

  • The screen displays a graphic representation of the players’ control layout. The screen should contain blue images of the Player #1 joystick, Player #1 Conwol buttons, and Coin Acceptor #1. Green PALETTE RAM TEST images appear on the screen of the Player #2 joystick, Player #2 Control buttons, and Coin The PALETTE RAM test performs read/write operations Acceptor #2. Lastly, gray images of the Start from the main CPU to the static RAMs to determine RGB and Test buttons appear on the screen. conformity. Select PALETTE RAM TEST and press any player Start button to begin the test.
  • Images on the screen will change color when the control is activated. Coin slots can also be tested from this screen. STREET FIGHTER V1.00.
  • Pressing the Start or Test button will also be PALETTE RAM TEST highlighted on the screen. PALETTE RAM STATUS = XXXX
  • To exit the test, Player 1 and Player 2 Start buttons PALETTE RAM TEST (PASSED/FAILED} must be pressed at the same time.

PRESS START TO EXIT VOLUME SETTINGS PRESS JAB TO LOOP TEST

To adjust the sound volume of the game, move the joystick up to increase the volume or move the joystick down to decrease the level of sound. For example, the following screen PALETTE RAM TEST SCREEN displays a user-selected Volume Setting of 20% :

Page 13

Page 18

@QNPEERI coin-op, INC. STREET FIGHTER : THE MOVIE™

NOTES

Page 14 Proprietary and confidential Information, not to be disclosed or copled without the express permission of CAPCOM® COIN-OP, INC.

Page 19

CAPEEN* conor, inc. STREET FIGHTER : THE MOVIE™

GENERAL TROUBLESHOOTING GUIDE

POWER-UP PROBLEMS

SYMPTOM POSSIBLE SOLUTION (S)

NO RESPONSE WHEN | Check A.C. line cord. GAME IS TURNED ON Check the power supply switch is in the “on” position; also, check the circuit breaker for proper operation.

Check the +5VDC, -5VDC, and +12VDC outputs of the power supply; replace power supply if any of these readings are not within spec.

Check for a blown fuse on the motherboard PCB; replace if necessary, also, check the +5VDC supply voltage on the motherboard PCB; if it doesn’t read between +5 VDC and +5.2VDC, adjust power supply trim pot.

Check the JAMMA harness for shorts, such as frayed wires or contact with bare metal; replace hamess if required.

Check for loose or foreign material on all PCB's.

2GAME WILL NOTCheck all PCB's for bent pins on socketed parts: re-align pins and seat IC's properly.

BOOT; POWER-UP SOUNDS ARE Check the +5VDC supply voltage on the motherboard PCB; it doesn’t read between REPETITIVE +5VDC and +5.2VDC, adjust power supply trim pot.

3GAME BOOTS UP INCheck the position of DIP switch 1; it should be in the ON position for normal game play.

TEST MODE

CONTROL PROBLEMS

REF SYMPTOM POSSIBLE SOLUTION (S)

1BUTTONS ORPerform the Player Control Test to verify operation (refer to the System Tests section of

JOYSTICKS DO NOT this manual). WORK OR OPERATE INTERMITTENTLY Check the common post of the button switch for a good connection to ground.

Check the normally “open” post of the button switch for a good connection to the signal wire.

Check the button switch terminals with an ohmmeter.

Check the wiring between the JAMMA connector and the particular button switch.

Proprietary and confidential information, not to be disclosed or copied witout the express permission ot CAPCOM® COIN-OP, INC. Page 15

Page 20

® CAE” co-op, inc.

STREET FIGHTER : THE MOVIE™

GENERAL TROUBLESHOOTING GUIDE

CONTROL PROBLEMS (continued)

REF SYMPTOM POSSIBLE SOLUTION (S)

2COIN METERCheck for +12VDC power on the “+” terminal of the meter switch.

INOPERATIVE Check the continuity of the signal wire from the meter switch to the JAMMA connector.

3 SCREEN BLANKS OUT | Check the junction resistance of the IN4004 diode on the coin meter harness receptacle. AND/OR GAME RESETS WHEN A COIN IS INSERTED

VIDEO PROBLEMS

REF SYMPTOM POSSIBLE SOLUTION(S)

1NO PICTURECheck the position of DIP switch 4; it should be in the ON position for a negative sync

monitor.

Check all wiring connections from the motherboard PCB video outputs to the monitor's video inputs.

Check the operation of the monitor by testing with another, compatible logic board. ——_—_—_—_—_——_}. 2 NO RASTER/NO VIDEO | Check the A.C. line cord.

Check the power supply switch is in the “on” position; also, check the circuit breaker for proper operation.

Adjust the monitor brightness control.

3RASTER/NO VIDEOCheck all motherboard PCB-to-monitor connections.

Check power supply voltages on the motherboard PCB.

4NO VIDEO (GAMEAdjust monitor brightness control.

SOUNDS CAN BE HEARD) Check all motherboard PCB-to-monitor connections. 5 SCRAMBLED PICTURE | Check DIP switch 4 is in the ON position.

Page 21

(CAPCOM COIN-OP, INC. STREET FIGHTER : THE MOVIE™

GENERAL TROUBLESHOOTING GUIDE

VIDEO PROBLEMS (continued)

REF SYMPTOM POSSIBLE SOLUTION (S)

le MISSING COLORS, Check all red, green, and blue (RGB) connections on the video PCB. WRONG COLORS, OR A WASHED-OUT Check for proper wiring between the motherboard PCB and the monitor. COLOR Check all monitor adjustments; re-adjust as necessary.

| Degauss the monitor. 7 BRIGHT, BLURRY, OR | Check monitor ground for proper connection to the monitor. WAVY PICTURE Check sync inputs for proper connection to the monitor.

Check horizontal hold adjusunent; re-adjust as necessary.

8ROLLING PICTURECheck horizontal and/or vertical hold adjustments; re-adjust as necessary.

Check sync inputs for proper connection to the monitor.

9PICTURE IS TOO.Check width and height adjustments; re-adjust as necessary.

LARGE , TOO SMALL, OR OFF-CENTER

10VIDEO IMAGE ISChange the position of DIP switch 3.

FLIPPED Reverse the monitor's convergence wires (refer to the Monitor Appendix section of this _| manual).

uPOOR IMAGESPerform GROM checksum test (refer to the System Tests section of this manual).
12DIAGONAL WHITECheck earth and logic ground connections at the power supply.

LINES

SOUND PROBLEMS

SYMPTOM | POSSIBLE SOLUTION (S) NO SOUND

‘and confidential information, not to be disclosed or copled witout the express permission of CAPCOM® COIN-OP. INC. Check the volume setting of the game (refer to the System Tests section of this manual).

Check speakers for an “open circuit” between the “+” and “-” terminals.

Check the status LED on the sound PCB for a continuous flashing condition.

Check power connections and voltage levels on the audio amplifier PCB.

Check speaker wiring.

Check each speaker by replacing it with a known, working speaker.

Page 17

Page 22

CAR@OMI* coin-op, INC.

STREET FIGHTER : THE MOVIE ™

AUXILIARY JAMMA CABLE CONNECTIONS

CONNECTOR WIRE COLOR PIN WHITE/VIOLET CONNECTS TO CONTROL PANEL BUTTON SWITCH LOCATION FUNCTION PLAYER 1 - FIERCE

FEMALE SPADE WHITE/GRAY CONTROL PANEL BUTTON SWITCH PLAYER 1 - SHORT

FEMALE SPADE WHITE/BLACK CONTROL PANEL BUTTON SWITCH PLAYER 1 - FWD

FEMALE SPADE VIOLET/BLACK

FEMALE VIOLET/GRAY SPADE CONTROL PANEL BUTTON SWITCH PLAYER 2 - FIERCE

CONTROL PANEL BUTTON SWITCH PLAYER 2 - SHORT

FEMALE SPADE FEMALE SPADE FEMALE SPADE VIOLET/WHITE

BLACK

VIOLET

WHITE

SNAP-IN PIN SNAP-IN PIN SNAP-IN PIN SNAP-IN PIN VIOLET/BLACK VIOLET/GRAY VIOLET/WHITE. WHITE/VIOLET. CONTROL PANEL BUTTON SWITCH CONTROL PANEL BUTTON SWITCH CONTROL PANEL BUTTON SWITCH CONTROL PANEL BUTTON SWITCH PLAYER 2 - FWD

GROUND

PLAYER 2- ROUNDHOUSE PLAYER 1- ROUNDHOUSE MOTHERBOARD PCB JAMMA ‘b’ PLAYER 2 - FIERCE MOTHERBOARD PCB JAMMA ‘c’ PLAYER 2 - SHORT MOTHERBOARD PCB JAMMA ‘d" PLAYER 2 - FWD MOTHERBOARD PCB JAMMA ‘24° PLAYER 1 - FIERCE SNAP-IN PIN WHITE/GRAY MOTHERBOARD PCB JAMMA ‘25’ PLAYER 1 - SHORT SNAP-IN PIN WHITE/BLACK MOTHERBOARD PCB JAMMA ‘26° PLAYER 1 - FWD 3-PIN MOLEX WHITE MOTHERBOARD PCB JP12 PLAYER 1- ROUNDHOUSE 3-PIN MOLEX 3-PIN MOLEX BLACK VIOLET MOTHERBOARD PCB JP12 GROUND MOTHERBOARD PCB JP12 PLAYER 2- ROUNDHOUSE 4-PIN MOLEX RED/GRAY SOUND PCB JP5 LEFT SPEAKER (+) 4-PIN MOLEX 4-PIN MOLEX RED/BLACK GREEN/GRAY SOUND PCB SOUND PCB JP5 LEFT SPEAKER RIGHT SPEAKER (+) 4-PIN MOLEX | GREEN/BLACK RED/BLACK SOUND PCB RIGHT SPEAKER (-) CABINET LEFT SPEAKER (-)

FEMALE SPADE RED/GRAY CABINET LEFT SPEAKER (+)

FEMALE SPADE GREEN/BLACK CABINET RIGHT SPEAKER (-)

GREEN/GRAY

Page 18 CABINET RIGHT SPEAKER (+)

[Proprietary and confidential information, not to be disclosed or copled without the express permission of CAPCOM® COIN-OP, INC]

Page 23

CANPEENI*coIn-op, INC. STREET FIGHTER : THE MOVIE ™

JAMMA HARNESS CONNECTIONS

WIRE COLOR COMPONENT SIDE SOLDER SIDE WIRE COLOR

GND:GND

GND GND

+5 VDC|3. | +5 VDC
+5 VDC::+5 VDC
-5 VDCS={-5 VDC
+12 VDC:+12 VDC
KEY7KEY
COIN COUNTER 2ceCOIN COUNTER 1
“LEFT SPEAKER(-i.|“LEFT SPEAKER
“RIGHT SPEAKER (-)s“RIGHT SPEAKER (+)
VIDEO GREEN2{| VIDEO RED

VIDEO SYNC SERVICE 1 TILT SWITCH COIN 2 START 2 PLAYER 2 - UP re

ge PLAYER 1-UP

PLAYER 2 - DOWNpcePLAYER 1 - DOWN

pel cle lalal ole

PLAYER 2- LEFT __| PLAYER 2- RIGHT [PLAYER 2 - JAB PLAYER 2 - STRONG “VIOLET/BLACK | PLAYER 2 - FIERCE “= WHITE/VIOLET “VIOLET/GRAY | PLAYER 2 - SHORT “WHITE/GRAY “VIOLET/WHITE | PLAYER 2 - FWD = WHITE/BLACK GND : GND

26|PLAYER 1-LEFT

Fab PLAYER 1 - JAB PLAYER 1 - STRONG olela

; SPEAKER CONNECTIONS ARE MADE THROUGH THE SOUND PCB; SUPPLY WIRES ARE INCLUDED WITH THE AUXILIARY JAMMA CABLE INCLUDED IN THIS KIT (SEE CHART FOR CONNECTION INFORMATION) “ YOU MUST REMOVE THESE PIN CONNECTIONS FROM YOUR EXISTING JAMMA CONNECTOR AND INSTALL THE SNAP-IN PINS SUPPLIED WITH THE AUXILIARY JAMMA CABLE (SEE CHART FOR DETAILS)

[Proprietary and contidentlal information. not to be disclosed or copied without the express permission of CAPCOM® COIN-OP. INC] Page 19

Page 24

QNREONI coin-op, INC. STREET FIGHTER : THE MOVIE™

DIP SWITCH SETTINGS

  • MOTHERBOARD PCB

SWITCH # NORMAL PLAY MODE TEST MODE I NORMAL SCREEN SCREEN FREEZE [ SCREEN UPRIGHT SCREEN FLIP. NEGATIVE VIDEO SYNC (-) POSITIVE VIDEO SYNC (+)

NOTE: ALL OF THE ABOVE SWITCHES ARE NORMALLY ON
  • VIDEO ROM PCB (NOT USER CONFIGURABLE)

SWITCH # FACTORY PRESET UNDEFINED [ FACTORY PRESET [UNDEFINED [ UNDEFINED FACTORY PRESET UNDEFINED FACTORY PRESET

FUSE INFORMATION

[REF | LOCATION DESCRIPTION CAPCOM® P/N

Page 20 Proprietary and confidential Informatton, not to be disclosed or copled without the express permission of CAPCOM® COIN-OP, INC.

Page 25

CNPEEKI* coin-op, inc. STREET FIGHTER : THE MOVIE™

NOTES

Page 26

NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

CARCOMY COIN-OP, INC. 3311 N. Kennicott

Arlington Heights, Illinois 60004

Phone: (708) 797-6100 Fax: (708) 797-6306

Copyright © 1995 CAPCOM®coln-op, INc., All Rights Reserved