CATHODE RAY TOMES

War Gods

War Gods (HD 10/09/1996 - Dual Resolution) (Midway, 1995) · Manual · 57 pages · 30 sections · original scan

Page 1

; — MAY 1996 5 mipway 16-40052-101

WAR GODS DEDICATED GAME OPERATION MANUAL

Operation & Adjustments * Testing & Problem Diagnosis

Parts Information * Wiring Diagrams

wi

Page 2

DECLARATION OF CONFORMITY

MIDWAY MANUFACTURING CO., INC.

3401 N. CALIFORNIA AVE. CHICAGO, IL 60618 U.S.A.

WE, HEREBY DECLARE UNDER SOLE RESPONSIBILITY THAT

THE MODEL: "WAR GODS" 40252, 40452, 41052, 42052 (VIDEO)

TO WHICH THIS DECLARATION RELATES IS IN CONFORMITY WITH THE

FOLLOWING EUROPEAN PRODUCT SAFETY DIRECTIVES:

ELECTROMAGNETIC COMPATABILITY DIRECTIVE (89/336/EEC AND AMENDMENTS 91/C 162/08, 92/31/EEC,93/68/EEC

AS IS VERIFIED BY COMPLIANCE WITH THE FOLLOWING STANDARDS:

EN5014: 1993 EN61000-4-2: 1995 IEC 801-3: 1984 (EN61000-4-3) EN61000-4-4: 1995 EN61000-4-5: 1995

Date issued: APRIL 15, 1996

MANUFACTURE'S SIGNATURE

= - ore

DON HASSLER

V.P. MANUFACTURING

Page 3

HARD DRIVE HANDLING GUIDELINES

Hard drives are especially sensitive to rough handling and electrostatic discharge (ESD). To avoid these hazards, adhere to the following guidelines:

ELECTROSTATIC DISCHARGE (ESD) ¢ Keep the end of the drive cable in an anti-static bag until you are ready to install it in your system. ¢ Do not put any other objects inside the anti-static bag with the end of the drive

cable.

HANDLING

¢ Do not put anything on top of the drive - especially another drive. ¢ Do not drop a disk drive. Some drives can be damaged by being dropped from an inch above a hard surface.

¢ Be sure to handle the hard drive with care when setting it down. Do not set the drive on its edge.

INSTALLING

¢ When installing the drive, remove the cable from the anti-static bag.

¢ Turn off the power before connecting the drive to the system.

  • Do not connect the drive to the CPU board, or disconnect the drive from the CPU

board, while power is on. e BE VERY CAREFUL TO ALIGN THE DRIVE CABLE CORRECTLY WITH THE CPU CONNECTOR. Installing a the hard drive cable incorrectly will ruin the drive!

STORING, PACKING, AND TRANSPORTING DRIVES

¢ If you are using the single pack carton, do not pack more than one drive per carton. e Pack the end of the drive cable in an anti-static bag. Then, put the hard drive in an approved shipping container. ¢ Do not throw, drop, puncture, or walk on shipping boxes.

Note. You should use the same degree of care when handling a drive that may be defective that you use when handling a new, working drive.
Page 4

NOTES

Page 5

Information current at time of release.

Fill out and mail in game Registration card. Be sure to include the game serial number. For your records, write the game serial number in the manual.

Serial Number

MIDWAY Manufacturing Company reserves the rights to make modifications and improvements to its products. The specifications and parts identified in this manual are subject to change without notice.

Page 6

TABLE OF CONTENTS

Section One - Operation

Inspection and Installation Location Requirements. Cabinet Assembly Diagrams

Game Features............:ccccecseesseees

Starting-up. Player Controls... Control Panel DiaQram...........cssccsscsscsnscsnscssecsseessessscssesssvssssesucsscececesueceseseeees 1-8 Game Operethons:isissssasssscsceuszc.ascsanscensseswasssqsisis nisnSeoassuassticaesiatcsesssarocessennesepnecae 19 Control Switches 1-9

Control Switch Location Diagram...........sssssssssesssesseessesssessuessecssesssesssecsneeseees 1-9 Menu System Operation..............ccccssssessssesssssessssseessscsssecssssecssuesesvecsasecessesseeeeee 1-10 Operation............. Main Menu............

Diagnostic Test. SWORDS casreccevsnsxcscncnssazy tpn peas GOV UR RE STESIES AN eaceoreeserens 1-11

Monitor Patterns...

Burn-in Test and Coin Counter Test.

Coin Bookkeeping Game Audits.....

Game Adjustments.

Mechanical Counters Settings. Standard Pricing Table............cssssscssssssssssessssescsssseesesssesessssseeeeesssneeessnnne Custom Pricing Table...........secssecssseessecsssesssucesnsesssuecssnesssuecssecessneesssvess 1-24 Utilities...

Page 7

Section Two - Parts Information Cabinet Front - View 1... oi 2

Cabinet Front - View 2..........sssesssesessessessseessesneenssseensentensenecsnsensensenssnsntsanenennenecnes

Cabinet Rear View...

Cabinet Cut-Away ViOW..........sssssseesesseereereesnsnsesnsenensanserene Rear Door Parts & Coin Door Parts. Control Panel & HOUSING Parts...........cscesseseseseeeenrensnenesnsnrsesneseretesseanensensneneaenes 2-7 Power Supply. 2-8

CPU Board...

AC Distribution Assembly and Cables....... Line Cord Application Chart and Coin Door Chart 2-10

Section Three - Cabinet Wiring

JAMMA Chart.

Power Wiring. Cabinet Wiring Diagram. 3-4

Section Four - Troubleshooting

Game Completely Non-functional...........:sssessssssuersssesssnseessneesssnsssnnesrnnecnnacenneeene 4-2 Marquee Lamp is Non-functional........-..sssessesseessessssssssesneesnessnseesseanennennneenenaneenees 4-2

Monitor Appears Non-functionall...........:ssesssessesssesssssssessesssseeneeneenneanersnennnenneesneens 4-2

Sound is Non-functional.........

Video Game Appears Non-functional......... Video Screen Exhibits Loss of Sync of Horizontal Tearing... Audio is Distorted, Muffled or Missing Frequencies. Game Enters Power-on Diagnostics, But Not Enter Normal Game Play.....ssscsessessessessesesssnsenesnsenesnseesstsnecnrsnseessesssssnsenesnsenssaensenssasanenasanenecanens 44

Disk Drive Diagnostics...........:-sessessessessesessessessesnessesnssnsssssnesnnsaneenennenssnnenaeneenaneeses 4-5

Disk Information...

Disk Directory........ccescccsessessesseeseesesneenesnessesnssnsssssessnsenecnscnenseanensnneenenncencaneeses Verify Files... Disk Read/Write Test............escsesessereessesesnenesesnsncsecnssessessnsesssensseanensnenseeneee 4-5

Sector Read Test.........:.cccssssssssscssssecesssscssssnsssenensensnesnssssssscsesnsseseensnesssnsnenens 4-5

© Copyright 1996 MIDWAY Manufacturing Company

Page 8

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 9

SECTION

ONE

OPERATION

Page 10

SAFETY NOTICES The following safety instructions apply to all game operators and service personnel. Specific warnings and cautions will be found throughout this manual where they apply. We recommend that you read this page before preparing your game for play.

ZA\ CAUTION HARD DRIVE. The end of the hard drive cable must be packed in an anti-static bag. The disk drive assembly must be packed in an approved shipping container (p/n 08-7981.1) in order to be sent in for repair or replacement. TRANSPORTING GAME: This game contains fragile electronic devices. Do not move this game with power on. Transport this game securely. Avoid rough handling.

ISOLATION TRANSFORMER. This video game system does not utilize an isolation transformer. No isolation exists between the cabinet AC system and the external AC line.

AC POWER CONNECTION. Verify that the slide switch on the power supply is set for 110VAC or 220VAC according to local line voltage. Verify that the fluorescent lamp assembly is correct for local line voltage. PROPERLY GROUND THE GAME. To avoid electrical shocks, do not plug in the game until it has been inspected and properly grounded. MIDWAY games should only be plugged into a grounded 3-wire outlet.

DISCONNECT POWER DURING REPAIRS. To avoid electrival shock, disconnect the game from the AC power source before removing or repairing any part of the game.

USE THE PROPER FUSE To avoid electrical shock, the replacement fuse must match the original fuse in fuse type, voltage rating, and current rating. HANDLE FLUORESCENT TUBE AND CRT WITH CARE. If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly eight feet or more from the implosion.

EPILEPSY WARNING A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.

Page 11

ATTENTION PROPERLY ATTACH ALL CONNECTORS. Be sure that the connectors on each printed circuit board (PCB) are properly connected. If they do not slip on easily, do not force them. A reversed connector may damage your game and void the warranty. All connectors are keyed to fit specific pins on each board. SETUP PROCEDURE

Game Location Requirements

Power Temperature Humidity

Domestic 120VAC @ 60Hz 3.0 Amps 32°F to 100°F Not to exceed 95% relative Foreign 230VAC @ 50Hz 2.0 Amps (0°C to 38°C) Japan 100VAC @ 50Hz 3.0 Amps

Cabinet Statistics Shipping Dimensions Shipping Weight Width 27" - Depth 41" - Height 73" Approx. 385 Lbs

INSTALLATION & INSPECTION

1. Remove all items from the shipping containers and set them aside. Inspect the exterior of the cabinet and the control panel for any damage.

The coin door keys are attached to one of the joysticks. Unlock and open the coin door and the cash box door. Remove the spare parts stored in the cash box and remove the rear door keys located on a key hook inside, on the left side of the cabinet.

Remove the screws holding the rear door then unlock and remove the door. Inspect the cabinet interior for any signs of damage. Check all major assemblies to assure that they are mounted securely.

Refer to the Cabinet Wiring Diagram (Section 3), and check to see that all cable connectors are correctly secured. Do not force connectors. Watch for damaged connectors and avoid making reversed connections.

To secure the rear door with a padlock, remove the two nuts from inside the cabinet, above the rear door opening. The hasp is located on the spare parts bag. Slide the hasp on the bolts so that it protrudes from the hole in back of the cabinet. Replace the nuts.

Remove the two nuts and bolts from the back of the rear door, holding the lock plate in place. Turn the lock around so that the slot in the plate is below the door. Reinstall the two nuts and bolts.

Next, locate the four leg levelers among the spare parts in the cash box. There are four threaded holes on the bottom of the cabinet; one in each corner. Place one leg leveler (with its hex nut) in each of the threaded holes. Lower each leg leveler until the cabinet is stable and level.

!! WARNING !! The cabinet is top heavy.

1-3

Page 12
  • To attach the line cord, remove the four Phillips-head screws that mount the line cord cover plate to the rear of the cabinet. Match the prongs on the plug with the holes in the receptacle and push the line cord securely into place. Be sure the cord aligns with the indentation of the plate, (indentation should point toward the bottom of the cabinet). Remount the line cord cover plate.

(Por of cabinet shown Receptacle for reference only) me Philips-head Sere

Line Cord & Plug

Temper=resistant Sorew

  • Replace the rear door and fasten securely to the cabinet using the four HWH screws. Lock the rear door and remove the key.
NOTE Tamper resistant screws and matching wrench are provided with the game. The tamper resistant screws and wrench are located in the spare parts bag. Replace the HWH screws with the tamper resistant screws and tighten the screws with the T20 Torx wrench provided.

9, Plug the game into a grounded (3-terminal) AC wall outlet. Switch ON the game, using the ON/OFF switch located on the upper left rear of the cabinet.

1-4

Page 13

CABINET ASSEMBLY Front View

Rear View

VENT COVER

REAR DOOR PROGRAMMED HARD ORIVE

Page 14

SERVICING

@ Servicing the Control Panel Switch off power to the game and open the coin door. The control panel is held in place by two latches (located inside the cabinet) which provide constant pressure on the strikes. To release the latches, reach through the coin door opening toward the right and left sides of the cabinet. Lift the latch handle and unhook the wire fasteners. Grip the joysticks and carefully tilt the control panel back on its hinge.

To return the control panel to its normal position, carefully lean it forward until it rests on the cabinet. Be careful not to let the contro! panel slam down onto the cabinet, or to pinch any wires. Always reclasp the latches.

@ Removal of the Viewing Glass Switch off power to the game and open the control panel. Loosen the three Phillips head screws and slide the black metal strip from the bottom of the viewing glass. Carefully slide the glass from the side grooves and lift it clear of the cabinet.

¢@ Removal of the Monitor Bezel Switch off power to the game. Open the control panel and remove the viewing glass. Lift the bezel off of the monitor.

@ Monitor Replacement We recommend that you read the SAFETY NOTICES section thoroughly before beginning this procedure. Switch off power to the game. Remove the viewing glass and the monitor bezel. Completely disconnect the monitor from all of its cabling. Remove the four flange nuts securing the monitor's mounting flanges to its mounting panel. Pull the monitor carefully from the cabinet.

AN CAUTION

The monitor does not require an isolation transformer. However, when servicing the monitor on a test bench, YOU MUST ISOLATE THE MONITOR FROM LINE VOLTAGE WITH AN ISOLATION TRANSFORMER. THE MONITOR IS HEAVY. BE SURE IT IS FIRMLY SUPPORTED IF IT MUST BE REMOVED FROM THE CABINET.

¢@ Hard Drive Replacement REMEMBER: HARD DRIVES ARE FRAGILE Use an anti-static bag and approved shipping container (p/n 08-7981.1) to return the hard drive to your distributor. Switch off power to the game and open the rear door. Unplug the ribbon cable from the CPU board Unscrew the four hex head screws from the spacers and set them aside. Remove the spacers from the enclosure and set them aside. Remove the hard drive and enclosure assembly, (see Hard Drive Handling Guidelines in the front of this manual). Place the spacers - one in each four corner holes in the new hard drive enclosure. Place the enclosure assembly, with the ribbon cable facing the front of the game, on the wood chassis. Line up the holes in the spacers with the screw holes in the wood and use the hex head screws to fasten the assembly in place. Carefully plug the ribbon cable into the CPU board.

1-6

Page 15

@ Removal of the Marquee Switch off power to the game. Remove the hex-head screws from the black marquee retaining strip located on top of the header. Remove the strip and carefully lift the marquee and the marquee glass from the top of the header. Store the marquee carefully to prevent damage.

¢@ Removal of the Fluorescent Light Assembly Switch off power to the game. Remove the marquee glass and the marquee. The fluorescent bulb is now accessible for replacement. Remove the plastic lamp locks. Grasp the bulb, give it a quarter turn, and remove it from its socket. Carefully, place a new bulb into the socket, and turn to reinstall.

To remove the entire light fixture, disconnect the fluorescent light assembly from its power cable. Remove the screws that hold the assembly to the cabinet then lift out the assembly.

!! WARNING !! If you drop a fluorescent tube and it breaks, it will implode! Use care in handling.

@ Removal of the Speakers Switch off power to the game. Remove the marquee and the marquee glass. The speakers come out from the front of the cabinet. Be sure to disconnect the cabling and remove the nuts on the mounting screws before attempting to remove the speakers from the enclosure. Carefully, reinstall the seals upon completing any task in the speaker enclosure.

¢@ Volume Control, Begin Test Switch, and Service Credit Switch Open the coin door. The game's volume control and diagnostic push-button switches are located on a small bracket on the coin door. The volume is controlled by the two center buttons. Press the Volume Up or the Volume Down button until the desired sound level is reached. The Begin Test switch, on the right, activates the game's menu system. The Service Credit switch, on the left, allows credits to be allotted for service testing without affecting the game's bookkeeping total.

CONTROL SWITCH LOCATIONS ‘servce creas O

Page 16

GAME FEATURES STARTING UP When the WAR GODS game is turned on, it begins executing code out of the boot ROM, U41. This ROM contains basic tests to check the hardware and the disk drive.

  • Hit either START button to skip the boot ROM tests and run the game.
  • Hit the TEST button inside the coin door to skip the boot ROM tests and run the menued diagnostics. If no buttons are hit, then the system will complete all tests and load and run the game.

If any of the individual tests fail, then an error message will be displayed for each test. The message will be displayed for 30 seconds or until any button is pressed. If any one test fails, then at the end of the entire sequence, a message will be displayed stating how many tests passed and how many failed.

Once all Start-up tests have been passed, insert the proper amount of coins, bills, or tokens. Select which player receives the credit by pressing the appropriate Start button.

PLAYER CONTROLS ¢ Start Button Each player has a Start button. The Start buttons allow one or two players to begin or continue play.

« Joysticks Each player has a joystick which he uses to control an on-screen character.

¢@ High Punch/High Kick A punch or kick that hits an opponent above the waist.

@ Low Punch/Low Kick An punch or kick that hits an opponent below the waist.

¢ Block The ability to impede an opponent's attack.

¢ 3D The 3-D button gives the player the ability to view the screen in height, width, and depth.

NOTE Use joystick and button combinations to discover secret moves.

START (yellow)

HIGH PUNCH HIGH Kick | (green) (green) Q 8e8 Co 2o0%

(green) (green) (green) (green) Low PUNCH LOW KICK LOW PUNCH LOW kick

CONTROL PANEL

1-8

Page 17

GAME OPERATION

The WAR GODS Operator Control switches are located on a bracket, inside the coin door.

CONTROL SWITCHES

¢ Slam Tilt Switch The Slam Tilt switch prevents pounding for free games.

¢ Volume Down/Volume Up Buttons The Volume Down and Volume Up push-button switches increase or decrease the volume level of the music and speech. The volume level can be adjusted during the Attract Mode or during menu system operation. For greater profits, set your game's volume level at a nice loud setting.

NOTE The Attract Mode volume can be controlled independently of the Game Mode volume. See Volume Adjustment on page 1-26.

¢ Begin Test Button The Begin Test push-button switch enters the game's menu system. Press the Begin Test switch to access any of the menu system functions.

+ Service Credit Button The Service Credit push-button switch is a special feature switch that allots credit without affecting the game's bookkeeping total.

These buttons can be used instead of the control panel buttons when operating the Menu System. The Up and Down buttons move the cursor, and the Enter and Escape buttons open and close the menus.

NOTE The coin door must be open for the control switches to work.

voLUMe vouMEe BEGIN DOWN uP Test SERVICE Reps (Omer Os0|

ENTER SLAM TILT

[

CONTROL SWITCH LOCATIONS

1-9

Page 18

MENU SYSTEM OPERATION OPERATION All game audits, adjustments and diagnostics are options of the Main Menu. Each option, in turn, has its own menu that lists several choices which you may act upon as desired.

Press the Begin Test switch on the coin door to access the menu system. The game Diagnostic System screen comes up and the game performs self-diagnostics. Once the self-diagnostics are completed, the Main Menu screen comes up. Game adjustments, bookkeeping and diagnostics are all accessible from this menu.

DIAGNOSTICS SYSTEM SCREEN

Use any joystick to move the cursor up and down the menu screen. Notice that the options are highlighted in sequence. Only highlighted options can be selected. Press any action button, on the control panel, to select a highlighted option. To return to the Attract Mode, use any joystick to select EXIT TO GAME OVER, then press any action button.

MAIN MENU SCREEN

Page 19

DIAGNOSTIC TESTS Use any joystick to select the Diagnostic Test menu from the Main Menu, then any action button to open it. Once the Diagnostic Test menu is open, use any joystick to move the cursor up and down and then any action button to open a highlighted option.

DIAGNOSTIC TESTS SCREEN

Switch Test The Switch Test allows the operator to test the switches on the control panel and in the coin door.

Use any joystick to highlight the Switch Test and then any action button to begin the test. During the Switch Test the top of the screen shows the control panel switches while the bottom of the screen shows the coin door switches. Press a control panel or coin door switch and the switch location on the screen changes color. Release the switch and the screen returns to normal.

SWITCH TEST SCREEN

4-14

Page 20

DIP Switch Test The DIP Switch Test allows the operator to check or change the positions of the DIP Switches.

Use any joystick to select the DIP Switch Test, then any action button to access the DIP Switch Settings. The screen displays the current settings. To change a setting, slide the switch to the desired position. Check the screen to verify the new setting. in some cases, setting a function to OFF actually enables the function. For example, setting Coinage to Off enables DIP Switch Coinage.

DIP Switch 1 Setting Table

Not Used |_(must be Off) _ Sw.1_ | Sw.2 | Sw.3 | SW.4 Not Used Off* (must be Off) On Not Used Off* (must be Off) On Off* On Blood Level Show Blood No Blood Off* On Game Graphics Normal “Family” Version OF On Not Used Off* On Off* On

DIP Switch 2 Setting Table SW. 1 sw.2 | Sw.3 SW. 8 | Coinage DIP Switch CMOS Off* On sw.4 | Sw.5 [aus ‘SW.7

Coin Settings USA 1 Ger. 1 USA2 Ger. 2 USA3 Ger. 3 USA 4 Ger. 4 USAECA Ger. ECA USAQ Ger. 5 USA 10 N/U Free Play __ Free Play ore On Off On Off Off* Off Off Fret Fr.2 Fr.3 Fr.4 Fr. ECA Fr 11 On Fr. 12 Off Free Play | On On On On On Country USA Germany France Off* On Off Off" Off On On On Not Used Not Used Off* On Game Mode Test Mode Off* On *Indicates factory default setting.

Page 21

System Test The System Test allows the operator to monitor the functions of the CPU board. Select this test with any joystick. Press any action button to start the test.

SYSTEM TEST SCREEN

Disk Functions Disk Function allows the operator to monitor the functions of the disk drive. Select this option with any joystick, then press any action button.

DISK FUNCTIONS SCREEN

Page 22

Disk Functions Continued...

  • Disk Information The disk information option can be used to check and verify the basic interface between the game CPU and the disk drive itself. This test will cause the game CPU to query the disk drive and ask the drive to report various status information back to the game CPU. This information is then displayed on the video screen.
  • Disk Directory The Disk Directory option causes the game CPU to query the disk drive and ask the disk drive to report the files currently stored on the disk. This information is then displayed on the video screen.
  • Verify Files The Verify Files option instructs the game CPU to check and verify the data integrity of each file stored on the disk. The results of the file verification process are displayed on the video screen.
NOTE The file verification process DOES NOT check and/or verify that the correct files are stored on the disk. It only verifies the integrity of the actual files on the disk.
  • Disk Read/Write Test This test will write a temporary file out to the disk, close the file and then read and compare the file back from the disk drive. This test is useful in verifying the ability to store and retrieve game information (such as audits, game settings, etc.) from the disk drive.
  • Sector Read Test This test will perform a sector by sector read/verify test on the disk drive. This test in useful in checking the ability of the disk drive to read data from all portions of the disk drive itself.
Page 23

Sound Test This test allows the operator to listen to some of the sounds this game is capable of producing.

Use any joystick to select the test, then press any action button to open the menu. The screen displays three test options. Use any joystick to select an option and any action button to begin the test.

Sound DSP Test

SOUND TEST SCREEN

SOUND DSP TEST analyzes the sound circuitry. A successful test causes a single "tone" to sound.

SPEAKER TEST sends sounds to the individual speakers.

PLAY SOUNDS tests digital sounds from the CPU board.

Page 24

Monitor Patterns The Monitor Patterns Test provides a menu for adjusting and testing the monitor.

Use any joystick to select this test from the Main Menu, then any action button to activate it. Once the menu is open, use any joystick to select an option, and any button to begin it. Press any action button again to return to the Monitor Patterns Menu.

MONITOR PATTERNS SCREEN

The RED, GREEN and BLUE SCREEN tests fill the screen with either red, green or blue. Press any action button to return to the Monitor Patterns Menu.

The COLOR BARS test fills the screen with 31 shades of colors to help with red, green and blue level adjustments. Each color should appear sharp and clear. Press any action button to return to the Monitor Patterns Menu.

The Color Bars screen is useful in adjusting the monitor brightness and contrast.

The CROSSHATCH PATTERNS test fills the screen with a grid and a series of dots. The grid and the dots should be clear. The dots should be round. Press any action button to return to the Monitor Patterns Menu.

The Crosshatch pattern is useful in verifying the monitor convergence, linearity, and screen size.

If any of the tests show a need for adjustment, use the proper knobs on the Monitor Controls board.

Page 25

Burn-in Test The Burn-in Test will continuously exercise the appropriate sections of the game CPU.

Use any joystick to select the test, then press any action button to activate it. When the Burn-in Test detects an error, a message is displayed on the screen.

Color RAM

BURN-IN TEST SCREEN

Coin Counter Test The Coin Counter Test checks the function of the coin counters.

Use any joystick to select the test, then press any action button to activate it.

COIN COUNTER TEST SCREEN

NOTE This test will cause the coin meters to increment.
Page 26

COIN BOOKKEEPING The Coin Bookkeeping Table records the coin box totals and the game play counters.

Use any joystick to select the Coin Bookkeeping Menu, then press any action button to open it.

COIN 8OOKKEEPING SCREEN

Page 27

GAME AUDITS Use any joystick to select the Audits Menu, then press any action button to open it. Page through the available audits by selecting NEXT AUDIT PAGE or LAST AUDIT PAGE.

Game audits cannot be set. They can only be cleared.

View Audits

AUDITS MENU SCREEN

Page 28

GAME ADJUSTMENTS The Game Adjustments allow the operator to customize the game.

Use any joystick to select the Adjustments Menu, then press any action button to open it. The Game Adjustments Menu offers several options. Each option has several choices. Use any joystick to select an option, then press any action button to open the option. The next menu screen provides a setting value. Use any joystick to change the setting value and press any action button to lock it in.

ADJUSTMENTS MENU SCREEN

NOTE* Adjustment values set by DIP SWITCH override adjustment values set by the menu system.

1-20

Page 29

Standard Pricing Standard pricing allows the operator to choose any of the "standard" selections from the Standard Pricing Table. See page 1-23.

STANDARD PRICING SCREEN Custom Pricing Custom pricing allows the operator to install pricing other than that of the Standard Pricing Table. Custom pricing also allows the operator to select the maximum amount of credits per game, the amount of credits required to start a game, and the amount of credits required to continue a game. To use Custom Pricing, the Coinage DIP Switch must be set to ON (CMOS). See page 1-12 for the DIP Switch charts. See page 1-24 for the Custom Pricing Table.

Mechanical Counters The “Mechanical Counters” adjustment lets the operator adjust the multiplier and counter output for each slot.

Left Multiplier

MECHANICAL COUNTERS SCREEN

1-21

Page 30

Mechanical Counter Continued... There are five coin slots: the LEFT coin slot, the RIGHT coin slot, the CENTER coin slot, the EXTRA coin slot, and the BILL VALIDATOR. The multiplier for each of the these slots determines how many times the mechanical counter is strobed for each coin or bill through the slot. There are two mechanical counter outputs to choose from: mechanical counter output 0 (left side), and mechanical counter output 1 (right side). The default, most commonly used setting is referred to as the “totalizer mode”, and assigns all five slots to counter output 0.

Free Play This option selects free play. The setting choices for this adjustment are: -No

- Yes- Factory Setting:No

Game Difficulty This option determines how tough game play is. The setting choices are:

  • (1) Extra Easy
  • (2) Easy
  • (3) Medium
  • (4) Hard
- (5) Extra Hard- Factory Setting:Medium

Game Time This option determines the length of the game. The choices are:

  • (1) Shorter
  • (2) Normal
- (3) Longer- Factory Setting:Normal

Violence Warning This option determines whether or not a message warning the player of the violent content of the game is displayed. The choices are: -On

- Off- Factory Setting:On

Blood This option determines whether or not blood is shown during the game. The choices are:

  • Show Blood i
- No Blood- Factory SettingShow Blood

Game Graphics This option determines whether the game contains the complete version of the graphics, or a “toneddown’, “family” version of the screen graphics.

  • Normal
- “Family Version”~ Factory Setting:Normal

Attract Mode Sounds This option determines if the game plays sounds during the Attract mode. The setting choices are: -No

- Yes- Factory Setting:Yes

1-22

Page 31

STANDARD PRICING TABLE Setting - Coin/Credit 1/25¢ (2 to Start, 2 to Continue) V/25¢ (2 to Start, 1 to Continue) /25¢ (1 to Start, 1 to Continue) 1/50¢, 3/$1.00 (1 to Start, 1 to Continue) /50¢, 4/$1.00 (2 to Start, 1 to Continue) 1/50¢ (1 to Start, 1 to Continue) 1/50¢, 3/$1.00 (1 to Start, 1 to Continue) 1/50¢, 4/$1.00 (1 to Start, 1 to Continue) 1/25¢ (3 to Start, 2 to Continue) 1/25¢ (3 to Start, 3 to Continue) USA ECA 1/25¢, 4/$1.00 © Start. 2 to Continue German 1 1/1DM, 6/SDM German 2 4/1DM, 7/5DM German 3 1/1DM, 8/5DM German 4 1/1DM, 5/5DM German 5 1/1DM, 6/5DM German ECA 4/1DM, 2/2DM, 6/5DM France 1 2/5F, S/10F France 2 2/5F, 4/10F France 3 1/5F, 3/10F France 4 1/5F, 2/10F France 5 2/5F, 5/10F, 11/2 x 10F France 6 2/5F, 4/10F, 9/2 x 10F France 7 ASF, 3/10F, 7/2 x 10F France 8 1/SF, 2/10F, 5/2 x 10F France 9 1/3 x 1F, 2/5F France 10 V2 x 1F, 3/SF France 11 13 x 1F, 2/5F, 5/2 x SF France 12 1/2 x 1F, S/SF, 7/2 x SF France ECA 1/3 x 1F, 2/5F, 5/2 x SF Canada 12 x 25¢, 3/$1.00 Swiss 1 A/AF, 6/5F Swiss 2 WIF, 7/5F Swiss 3 AF, 8/5F 1/500 lire UK 1 ECA 1/50P, 3/£1.00 UK 2ECA 1/50P, 2/£1.00 UK3 ECA 1/30P, 2/50P, 5/£1.00 UK 4 1/50P, 3/£1.00 UKS 1/50P, 2/£1.00 UK 6 ECA 1/30P, 2/50P, 4/£1.00 UK 7 ECA 3/£1.00 Spain 1 1/100 peseta, 6/500 peseta Ss peseta, 5/500 peseta 500 peseta

Australia 113 x 20¢, 2/$1.00$1.00
Australia 21/5 x 20¢, 1/$1.00$1.00

1/100 yen 100 yen 100 yen 1/5 schilling, 2/10 schilling % schilling | 10 schilling

1/2 x § schilling, 3/2 x 10 schilling5 schilling10 schilling

Belgium 1 Belgium 2 Belgium 3

124208 New Zealand 2 1/2 x 20¢ [Finland | 1/t markka Norway 1/2 x 1 krone, 3/5 x 1 krone Denmark 1/2 x 1 krone, 3/5 krone, 7/2 x 5 krone

Antilles1/25¢, 4/1 guilder1 guilder
Hungai1/2 x 10 forint, 3/2 x 20 forint10 forint20 forint

1-23

Page 32

CUSTOM PRICING SCREEN

Left, Right, Center. and Extra Units. Coins inserted accumulate units. This adjustment specifies the number of units given for each coin in the fourth chute (see "Units per Credit").

Bill Validator Units. Coins inserted accumulate units. This adjustment specifies the number of units given for each bill validated (see "Units per Credits").

Units per Credit. This is the number of coin units required to buy one credit.

Units per Bonus. There is one bonus credit awarded after this many coin units have accumulated.

Minimum Units. This is the minimum number of units required before any credits are given.

Credits to Start. Each player needs this many credits to begin a game.

Credits to Continue. Each player needs this many credits to continue a game.

Maximum Credits. This is the limit for the credit counter. Additional coins inserted will be lost (factory setting: 50).

Coins per Bill. Total collections are based on this many coins per bill. Set to zero to disable the total collections display.

Show Credit Fractions. Whether or not to show fractional credits on the credit screen.

1-24

Page 33

UTILITIES The Utilities Menu allows the operator to clear the game's bookkeeping memory.

Use any joystick to select the Utilities Menu, then press any action button. Use any joystick to select a utility. Press any action button to activate the selection.

UTILITIES MENU SCREEN

Once the selection is made, a dialogue box appears, and the operator can choose to reset the utility.

For example:

SET TIME & DATE SCREEN

1-25

Page 34

VOLUME ADJUSTMENT The Volume Adjust feature allows the operator to determine the sound and music level of the game.

The volume level can be adjusted from either the Attract Mode or the Menu System. Press the Volume Up button to raise the volume level and the Volume Down button to lower the volume level. Any joystick can also be used to raise or lower the volume level.

Master Volume

VOLUME ADJUSTMENT MENU SCREEN

The current volume level is shown with a red bar.

For example:

MASTER VOLUME SCREEN

1-26

Page 35

SECTION

TWO

PARTS

2-1

Page 36

CABINET FRONT - VIEW 1 CRT Glass

08-7456-10

03-8497 » NH 18020 FB STP as" cre Bezel

= 8 ete 5 § £ mag 4 S Zo \ So “8 \ 2s 5 Ee = = F et 2 4\ 85 3 La 3 Se E = 3 c 2e Zz

Ee or Mot

if = rs > a Fg E ag H pt a ay <5 os 3h si £8 a Be a és &$ a a

2-2

Page 37

CABINET FRONT - VIEW 2

Screw, H-F #8x11/16 PL-HWH 4608-01081-11

Cabinet Assembly |Z 40052-C

On/Off Switch 5642-14632—00

Associated Parts Not Shown: Glass Retainer Brkt. Leg Adjuster Registration Card DBV Installation Inst.

Caution Sheet Manual Key, T-20 Long Arm Screened Marquee Glass Retain Brkt Screws Interlock Switch Marquee Retainer 03-8252-2

Channel Glass Edge 03-9373-1

Blank Marquee Glass 08-—7456—4

Channel Glass Edge 03-9373-1 8 Ohm Speaker 5555-1396 1-00

Nut, 6-32 KEPS 4406-01128-—00

Nut, 8-32 KEPS 4408-01128-00

Screw, SSS 6-32x1-1/2 4506-01106—24B

Speaker Grille 01-11859

Screw, /8x5/8 TRX-TR <—~ *" 4108-01193-10B

~~ polt, 8-32x1-1/4CB (5) 4308-01123~-208

| —~Coin Door—USA 09-50000—33

Blank Coin Door w/Lock 09-41000

01-13943 08-7377 16-9478.2 16-9637 16-10077 16-40052-101 20-9620 31-2369 4008-01105—32 5643-09268-00 Control Panel A-20304 (see detailed diagram)

2-3

Page 38

CABINET REAR VIEW

Handle Pull Vent 03-8326 a H-F #8x11/16 PL-HWH ze 4608-01081-11

Bolt, 1/4—20x1-1/4 CB 4320—01123-—20B

Screw, SMS #8x1-1/4 PL-HWH-A 4108—-01115—20B

Pad Lock Bracket 01-11286

Key Lock Bracket 01-11287

Line Cord Cover 01—10714

Screw MS 8-32x1 P—RH SEMS 4008—01003-16 Rear Door Assembly A~20281 (see detailed diagram)

2-4

Page 39

CABINET CUT-AWAY VIEW

Wood Chassis Panel 04—10157

CPU Board

Spacers (4) A-—20356

DETAIL

*Shipping Container (08-7981.1) must be ordered from distributor before sending hard drive in for repair or replacement.

**Fan Assembly A-21055 Fan w/connector A-21068 Fan Guard w/mounting pins 03-9378 Fan Mount Brkt w/guard 03-9532 Push Rivets, Plastic 03-—9788-—10

2-5

Page 40

REAR DOOR PARTS Complete Rear Door Assembly A-20281

Upper Door Lock Cam 11-8989 *Door Lock Cam = ° H-F #8-32x11/16 PL-HWH Docks Ratainer, Plate '4608-01081-11 Nut, 1/4-20 Flange Grip 4420-01141-00

” Vent es Lock Plate 6 20" Vent Hole Cover eat

Nut, 1/4-20 Flangé Gri 4420-01141—00 *Door Lock Cam

f Bolt, 1/4—20x1-1/4 CB Sx 4320-01123-208

al

Rear Wood Door 04-10149.1 Door Bracket ~..~ O1-11291 ors *Secondary Door Cam Lock 20~-6542-TB *Primary Door Cam Lock 20-10187 Bolt, 1/4-20x1-1/4 CB Ss 4320-01123-20B8

COIN DOOR PARTS

Chute Bracket 01-11334

Mars Chute 01-11379

Bolt 1/4-20x1-1/4 CB 4320-01123-20B Bolt 1/4—20x1—1/4 CB 4320-—01123-20B

Coin Chute 01-12324

Wood Coin Vault 04—10150

Nut 1/4-20 Flange Grip 4420-01141-00

Screw MS 4-—40x3/8 P—FLH i ee ee Screw SMS #10x3/4 SL-HWH 4110-01088-12 Cover Plate O1-11275

Meter Plate 01-11298-1

Coin Meter & Diode 5580- en et Cash Tub 03-8863

2-6

Page 41

CONTROL PANEL & HOUSING PARTS Complete Control Panel & Housing Assembly A-20304

Green Pushbutton 31-2402

Yellow Pushbutton 20-10209-5 8-Way Joystick 20-9978-6 Control Panel Brkt 01-11996 Hi-Fast_ #8x11/16 PL-HWH 4608-01018-11 Green Pushbutton 20-10209—4

_W i Grounding Stud Z 20209788 From Far Left Side of Hinge.

Green Pushbutton 31-2402 Green Pushbutton 20-10209-4 Yellow Pushbutton Caer:

8-32 KEPS Nut (Ref.) / Grounding Strap an i + eS A e Black TSS 20-10209-6 D

i i i i i Wood Control Panel

  • 0123 Control Panel Assembly A-20303

Black Pushbutton 20-10209-6 Safety Chain 20-9275-2

Wood Control Panel Housing 04-10124

H-F yex11/16 Te | | 4608-01081-11 Mi i i | Nut, 8-32 KEPS 4408—01128-00 Toggle Latch 20-9347

Bolt, 8-32x1—1/4 Carriage 4308-01123-—20B Bolt, 1/4-20x1/1/4 Flat Head Carriage 4320-01164-20B Nut,1/4-20 Flange Grip 4420-01141-00 Associated Parts Not Shown: Control Panel Cable H-20375.1 Security Latch Bracket 01-11955 Clear Overlay 03-9392 Control Panel Plate 04—10156 Screened Overlay 31-2368

Page 42

POWER SUPPLY 20-10167

REAR VIEW

Connector Pin Designation *Note: Many computer grade power Pin# Function Wire Color supplies use yellow for +12V, blue for -5V, ,2,3 +5VDC Red and white for -12V. This is acceptable as 5,6 Ground Black long as the pinout is correct. 4, ys -5VDC_—Yellow* +12VDC Orange” 1] 000 [3 -12VDC_Blue* 4,000 [6

  • 000 /9

q MIAN

see OTH ~—O iit

FRONT VIEW

2-8

Page 43

CPU BOARD ASSEMBLY A-20371

Designation Part Number Description

U41A-5343-40052-1EPROM Assembly
ut2A-5343-40052-2EPROM Assembly
U69A-20352PIC 1657 Assembly
U61A-20374FPGA Assembly

U12

U61

U4)

U53 i (wor seo)

U69

PB SRAL1/0,

F."TJvAMMA EDGE CONNECTOR [Lalo }— rs} i fl oN PavER PAYER =

2-9

Page 44

Other Parts Necessary to WAR GODS

AC Distribution Assembly A-20278

AC Distribution Cable H-20279

AC Distribution Chassis 04-10103

Switcher Power Supply 20-10167

MS 4-40x3/8 P-FLH 4004-01041-06

MS 6-32x3/8 P-PH-S 4006-01003-06

Nut, 6-32 KEPS 4406-01128-00

Nut, 8-32 KEPS 4408-01128-00

Line Filter, 6A, 250V 5102-14240-00

Fuse, 3A, 250V, SB 5731-10356-00

Fuse Holder Panel 5733-12869-00

Cables

Line Voltage Cable A-20331

Dixie-Narco Cable H-17019

USA DBV Cable H-18136-1

Coin Door Interlock Cable H-18610

AC Distribution Cable H-20279

Main Harness (JAMMA) Cable H-20344

Cabinet Speaker Cable H-20346

A.C IDC Cable (for power supply) H-20353

Control Panel Cable H-20375.1 es

2-10

Page 45

2-11 Switzerland Hunga Canada Austria France Australia Belguim New Zealand German Spain Italy England

Japan USA Australia Belguim Switzerland Hungary Canada Austria France New Zealand England Part Number

09-50000-2 09-50000-3 COIN DOOR CHART <| 5850-13271-00

09-50000-6 09-50000-7 5850-13272-00

09-50000-14 09-50000-15 09-50000-17 09-50000-20 2} 5850-13273-00 5850-13275-00

09-50000-22 09-50000-23 5850-13276-00

09-50000-25 09-50000-33 5850-13277-00

09-80000-10 09-87000-4 5850-13278-00 LINE CORD APPLICATION CHART

Page 46

NOTES

Page 47

SECTION

THREE

WIRING

3-1

Page 48

JAMMA Chart

FUNCTIONi WIRE COLOR _WIRE COLORFUNCTION __
GroundBlackBlackGround
GroundBlackBlackGround
+5VDCRedRed

Red -5VDC +12VDC -5VDC +12VDC

Coin Counter 1 Coin Counter 2__| Brown-Red N/C Speaker -, Left__| Brown-Gray _ Speaker -, Right_| Brown-White Video Green Green Video Sync White Service Credits | White-Gray _ Speaker +, Left

Red-White Speaker +, Right

Red Video Red Brown Video Blue

Shield Video Ground

Black-Blue Test Black-Brown White White-Black White-Brown White-Red White-Orange 1 Right

White-Yellow 1 High Punch White-Blue 1 High Kick White-Violet Not Used

White-Green 1 Block

N/C Slam Tilt Black-Green Black-Red Violet-White Violet-Black Violet-Brown Violet-Red 2 Right Violet-Orange 2 High Punch Violet-Yellow 2 Block Violet-Green 2 High Kick Violet-Blue Not Used ]@}Q)0 | oO} |N| <}><|S1<]C} 4] | BD} 0] Zz] =} -] a] ] rz] -n] ml ololal>

Ground SOLDER SIDE COMPONENT SIDE

Control Panel wires that are not part of the Main JAMMA Harness.

2 Low PunchBlue-YellowBlue-Black1_Low Punch
2 Low KickBlue-GreenBlue-Brown1 Low Kick
23-DBlueBlue-Red13-D
Page 49

3-3

NOTE: FOR 220V OPERATION CHECK FUSE VALUE AND 120/220 SWITCH ON SWITCHING POWER SUPPLY ALSO VERIFY THE CORRECT FAN (120/220V), AND THE CORRECT FLUORESCENT LAMP (120V 60HZ OR 220V SOHZ).

POWER WIRING DIAGRAM

ax ga

B= lot 02 20 o3| |3 0 lo4} lao FUSE CHART

VOLTAGE FUSE

120 SASB 230 2ASB

Buk Bux LK

COMMONING BLOCK

BLK

  • 3] a a 8 Os

Bue NC. aK RN YEL atx RN YEL wE0

BK lwonriaR

Buk

wi 0 6 ES Bux Os BK

RN YE or RN YEL PowER |suPeLy

wit

2] 4 2 = OB Buk os RN YeL for

BK aK

RN YEL for RN YEL ucHT

Ne

los

Page 50

hae aan onsues | fee fd cunen kiss asa TF YSIG GYVH OL

wel |F

312 )2 1219 esse: 6 iy PEee Ree ES oE S van Jeleielalels BER, WOE Ndd

3-4 WVYSVIC ONIMIM LANIGVS

Page 51

SECTION

FOUR

TROUBLESHOOTING

Page 52

Game appears completely non-functional. A: Verify that the game power switch located on the top left rear of the game cabinet is turned on.

B: Verify that |.E.C. line cord connector is firmly and correctly seated into I.E.C. power entry module of A.C. power chassis. If not, then gently but firmly insert the I.E.C. power cable completely into the mating receptacle of the A.C. power chassis.

C: Check and verify A.C. line fuse of A.C. power chassis is not blown. If the fuse is blown, replace it with an identical fuse of the proper voltage and current rating. Note that a spare fuse is provided with the spare parts bag located in the cash box.

D: Check and verify that the correct A.C. line voltage is present the outlet.

E: Ensure that cabinet A.C. cable 4 pin and 9 pin connectors are firmly and correctly mated with the corresponding connectors of the A.C. power chassis.

Marquee lamp is non-functional. A: Check and verify that the fluorescent lamp is properly inserted into the lamp holders.

B: Check and verify that the lamp pins are making good contact with the mating pins of the lamp holders.

C: Check and verify that the proper A.C. voltage is present at the power connector of the lamp assembly. If no A.C. power is present, then check the cabinet A.C. wiring from the A.C. power chassis up to the fluorescent lamp itself.

D: Check and verify that the starter and lamp are functional by replacing them with known working units.

E: Check and verify that the fluorescent lamp ballast is correct for the local A.C. line voltage and frequency.

Monitor appears non-functional A: Check and verify that the cabinet A.C. line voltage cable is firmly and properly connected to mating A.C. connector on monitor.

B: Check and verify that the cabinet video signal cable connector is firmly and properly connected to the mating video signal input connector of the monitor.

C: Check and verify that the monitor remote adjustment board is properly installed and connected to the monitor chassis.

D: Verify monitor is operating correctly by replacing with a known good unit.

Sound is non-functional A: Check and verify the cabinet wiring is correct. Ensure that the speakers are properly connected to the audio out wires from the JAMMA connector. Refer to the cabinet wiring diagram for specific wiring information.

Page 53

B: Check and verify that the power supply is providing : +5V___+/- 0.25V +12V__+/-0.5V -5V +/- 0.25V

C: Check and verify that the above listed D.C. voltages are present at the correct JAMMA connector pins. Refer to the cabinet wiring diagram for specific wiring information.

D: Check and verify that the game volume has been turned up.

E: Verify proper operation of game PCB assembly by replacing it with a known good game PCB assembly.

5: Video game appears non-functional A: Check and verify that the JAMMA wire harness connector is firmly and properly seated to the mating JAMMA PCB edge connector.

CAUTION: DO NOT REMOVE OR INSTALL

JAMMA CONNECTOR WHEN POWER IS TURNED ON. DOING SO WILL DAMAGE THE GAME CPU ASSEMBLY AND VOID THE WARRANTY.

B: Check and verify that the D.C. power supply voltages at the game CPU assembly are set as follows: +4. +4.9V to +5.1V +11.5V to +12.5V -4.75V_to -5.25V The above voltages should be set when the game CPU assembly is connected and the game is powered on.

C: Check and verify that the non JAMMA connectors (Player 3/4 connectors, extra input/output connectors, etc.) are attached at the proper location and are firmly seated.

D: Verify that the game CPU assembly completes the power on self test sequence. Note any errors and/or failures during power on self test. The game CPU assembly should complete the power on diagnostics without error.

E: Check and verify that the game CPU DIP Switches are set properly. Review the switch configuration information from Section One. See page 1-12.

F; Enter the detailed game CPU diagnostics by pressing the Test button during the power on self test sequence. Check and verify the different functions of the game CPU by executing the individual CPU diagnostics.

6: The video screen exhibits complete loss of SYNC or consistent horizontal tearing. War Gods uses a MEDIUM Resolution, 25Khz scan rate monitor. Ensure that the monitor used is compatible with this requirement. Use of a standard video game LOW Resolution monitor will result in what appears to be horizontal tearing or complete loss of sync.

4-3

Page 54

The audio sounds distorted, muffled or missing frequencies. A: War Gods uses true Stereo Sound, with a separate audio amplifier for right and left speakers. The audio outputs from War Gods video PCB assembly are run directly from the JAMMA connector up to the separate speakers. Ensure that the cabinet wiring provides separate wiring (and not a common return) for each speaker.

The War Gods audio amplifiers are designed to drive full range speakers, and not discrete woofer and tweeter speakers. Ensure that the speakers are FULL RANGE response (100 to 10,000 Hz) and are rated at a minimum of 25 Watts.

The game will execute the power on diagnostics, but not enter normal game play. A: War Gods uses an external Hard Disk Drive assembly to store the game program, images as well as sounds. Ensure that the ribbon cable from the disk drive is firmly seated into the mating shrouded ribbon cable connector on the video PCB assembly.

ATTENTION: Do not remove or connect the ribbon cable from the hard drive assembly to the

B: PCB assembly when the cabinet power is ON. Doing so will damage the video PCB assembly as well as the hard drive assembly. This will also void your warranty.

Check and verify that the D.C. power supply voltage are within specification. Use the 2 Volt A.C. setting on a digital V.O.M. and verify that the supply voltages are stable and do not contain any tipple or noise.

Check and verify that the video CPU assembly is correct for the game.

Check and verify that the disk drive assembly is correct for the game. The hard disk is labeled with the software revision as well as assembly number.

Enter the internal game diagnostics by pressing the TEST switch during the power on self test sequence. Select Game Diagnostics, followed by Disk Drive diagnostics. This set of tests will check the interface between the video PCB assembly and the disk drive assembly. Select the “VERIFY FILES” option. This will check and verify the integrity of the game files resident on the disk drive.

Page 55

DISK DRIVE DIAGNOSTICS

1: Disk Information The disk information option can be used to check and verify the basic interface between the game CPU and the disk drive itself. This test will cause the game CPU to query the disk drive and ask the drive to report various status information back to the game CPU. This information is then displayed on the video screen.

2: Disk Directory The Disk Directory option causes the game CPU to query the disk drive and ask the disk drive to report the files currently stored on the disk. This information is then displayed on the video screen.

3: Verify Files The Verify Files option instructs the game CPU to check and verify the data integrity of each file stored on the disk. The results of the file verification process are displayed on the video screen.

NOTE The file verification process DOES NOT check and/or verify that the correct files are stored on the disk. It only verifies the integrity of the actual files on the disk.

4: Disk Read/Write Test This test will write a temporary file out to the disk, close the file and then read and compare the file back from the disk drive. This test is useful in verifying the ability to store and retrieve game information (such as audits, game settings, etc.) from the disk drive.

5: Sector Read Test This test will perform a sector by sector read/verify test on the disk drive. This test in useful in checking the ability of the disk drive to read data from all portions of the disk drive itself.

Page 56

NOTES

4-6

Page 57

WARNINGS & NOTICES

WARNING USE OF NON-MIDWAY PARTS OR CIRCUIT MODIFICATIONS MAY CAUSE SERIOUS INJURY OR EQUIPMENT DAMAGE! USE ONLY MIDWAY AUTHORIZED PARTS.
  • For safety and reliability, substitute parts and modifications are not recommended.
  • Substitute parts or modifications may void FCC type acceptance.
  • Use only MIDWAY Manufacturing authorized components and parts. Failure to do so will void warranty and may result in incorrect and/or unsafe operation,
  • This game is protected by federal copyright, trademark and patent laws. Unauthorized modifications may be illegal under federal law. This also applies to MIDWAY logos, designs, publications and assemblies. Moreover, facsimiles of MIDWAY equipment (or any feature thereof) may be illegal under federal law, regardless of whether or not such facsimiles are manufactured with MIDWAY components.
WARNING
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generated, uses and can radiate tadio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
WARNING Prevent shock hazard and assure proper game operation. Only plug this game into a properly grounded outlet. Do not use a cheater plug to defeat the power cord's grounding pin. Do not cut off the ground pin.
WARNING A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

lf you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.

NOTICE When MIDWAY ships a game, it is in compliance with FCC regulations. Your sticker is proof. If the sticker is missing or damaged, legal repercussions to the owner or distributor of the game may result. If your game does not contain an FCC sticker, call MIDWAY immediately.

NOTICE No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may be transmitted, or otherwise copied for public or private use, without permission from the publisher.

FOR SERVICE: CALL YOUR AUTHORIZED MIDWAY DISTRIBUTOR. MIDWAY MANUFACTURING COMPANY 3401 N. CALIFORNIA AVE. CHICAGO, IL 60618

© Copyright 1996 MIDWAY Manufacturing Company