Zero Point 2
Zero 2 Point (Unico Electronics Co., Ltd., 1999) · Document · 13 pages · 34 sections · original scan
ORIGINAL VIDEO GAME
ee OPERATOR'S *
- MANDAL «. >
a ©1999 UNICO ELECTRONICS CO., LTD.
1-1.
1-2.
4-1.
INTRODUCTION
EXPLANATION OF GAME SCREEN .
EXPLANATION OF THE SHOOTING GUN
. GAME SETTING SCREEN (BASIC)
2-2.
2-3.
. SCREEN CHECK
2-5.
2-6.
. CALIBRATION SET SCREEN
2-8.
VO CHECK SCREEN DIP SWITCH SETTING SCREEN
COLOR CHECK SCREEN SOUND CHECK SCREEN
CALIBRATION CHECK SCREEN
. DIP SWITCH TABLE
3-2.
3-3.
. GUN CONNECTOR
DIP SWITCH A
DIP SWITCH B
CONNECTOR SPEC I}
Nnoaonrat F&F wow
oonNN
1-1. EXPLANATION OF GAME SCREEN
"Move over video games, here’s the real thing!”
Basic explanation of displays on the screen during the game.
TIME REMAINING
—» BULLETS REMAINING
GAME SCREEN
1-2. EXPLANATION OF THE SHOOTING GUN
*Everytime you shoot, the hammer of
the gun will trigger like a real gun
= ee Soe
:
= =
- WARNING *
Do not try to hold the hammer of the gun or move the hammer
of the gun with your hand.
Do not hit, throw or any other way vandalize the gun. Do not abuse or use excessive force against gun.
Manually check and change the settings for the screen displays
and game controls.
. YO CHECK . DIP SWITCH SETTING . SCREEN CHECK . COLOR CHECK . SOUND CHECK . CALIBRATION SETTING . CALIBRATION CHECK . FACTORY . EXIT 5. 6. 7. 8. 9.
SELECT = 1P START START = 2P START
Mode for checking the performance of each control.
V/O Check
1P 2P
Gun Trg ee GUN TRIGGER TEST Start a START BUTTON TEST Service SERVICE COIN T
Coin COIN TEST
GAME SETTING BUTTON TEST Test
Exit==>1P Start & 2P Start
2-3. DIP SWITCH SETTING SCREEN
Dip switch setting mode.
When change the dip switch settings, set the dip switch by
referring to the dip switch table.
DIP SWITCH SETTING
FREE PLAY = ON
DEMO SOUND = OFF
UN LOADING = FACTORY
foge CREDIT COIN =
1 COIN 1CREDIT
DIFFICULTY = NORMAL
PLAYERS HEART = 4
CONTINUE MODE = ON EXIT => 1P START
Mode the checking the state of screen
2-5. COLOR CHECK SCREEN
Mode for checking the display color. The color of the color bars should appear properly graduated.
COLOR CHECK
RED COLOR ss
GREEN COLOR :
BLUE COLOR
WHITE COLOR. ~~ COLOR PALETTE oa TE
EXIT => 1P START
2-6. SOUND CHECK SCREEN
Mode the checking the sound & voice.
SOUND & VOICE CHECK
SOUND CODE # 000 SOUND CODE 000 ~ 082
VOICE CODE # 001 VOICE CODE 000 ~ 092
SOUND SELECT ==> 1P START
VOICE SELECT 2P START SOUND START ==> IP GUN TRG
VOICE START ==> 2P GUN TRG
EXIT => 1P START & 2P START
2-7. CALIBRATION SCREEN
Mode for setting up the shooting target point
} 10 q
| ( | j | ia | —in | [ |
| f | ] | OoOog | fo | iO |
DoOooCobooeoa Hoogo ne j 000-5 > 1P & 2P X PIVOT COORDINATE
| CILB LY 3900 | rie | E | IP & 2P Y PIVOT COORDINATE |
O f
Save automatically when push “EXIT”
2-8. CALIBRATION CHECK SCREEN
Mode for checking the shooting target point.
TARGET POINT J Set the target point of the gun.
Free Play
Coin —Credit Coin 1 Credit
Coin 2 Credit
Credit OFF Coin 3
Coin Credit ON
2 Coin 1 Credit OFF
Coin 1 Credit ON
Coin 1 Credit OFF
Coin 1 Credit ON ON ON
Continue
Mode 1Coin Credit Continue
1Coin ON
1Coin 2Credit Continue | 1Coin ON
1Coin 3Credit Continue
1Coin ON
1Coin 4Credit Continue
1Coin ON
2Coin 1Credit Continue
1Coin ON
3Coin 1Credit Continue
1Coin ON
4Coin 1Credit Continue
1Coin ON
SCoin 1Credit Continue
1Coin ON
Gun Loading
Mode Factory Setting OFF } OFF
Not-Reload ON | OFF Reload OFF | ON
3-2. DIP SWITCH B
ITEM DESCRIPTION 1 2 3 4 5.617 18 Normal OFF | OFF Easy ON | OFF Difficulty — Hard OFF | ON Very Hard ON | ON 4 OFF | OFF | OFF f 5 ON | OFF | OFF 5 : _ Player's 6 OFF | ON | OFF Heart 2 ON | ON | OFF 3 OFF | OFF | ON
[Demo Sound On ON
3-3. DIP SWITCH TABLE
PCB BOARD (UZP21001B) SWITCH
AAAAAAAAON
- VVVVVITV | OFF
DIP SWITCH 12345678
AAAAAAAA ON B ow VVVVT7V7 V9 | OFF
IGUN CONNECTOR
GUN BOARD 1P 2P
eeee
GUN SENSOR +5 1P RED GUN 2P BLUE GUN rriccER sw GND
GUN SENSOR: +5 TRIGGER SW GND
CONNECTOR SPEC
r
Solder Side Terminal Parts Side
| GND | A 1 | GND |
| GND | B 2 | GND |
| +5 | 3 | +5 |
| +5 | 4 | +5 |
E 5 7
| +12 | 6 | +12 |
G 7
H 8 Coin Counter
| 2P Lamp | i | 9 | 1P Lamp |
| Speaker (L) | J 10 | Speaker (R) |
K ll
| Video GREEN | L 12 | Video RED |
| Video SYNC | M | 13 | Video BLUE |
| Service Sw N | 14 Video GND / :
| NC | ie} 15 | Test SW | |
| 2P Coin Switch | | 16 | 1P Coin Switch - | |
| 2P Start | Q ! 17 | IP Start | | |
R 18
| Ss 19
T 20
U 21 Vv 22 -
W 23 x 24 -
Y 25
Z 26
| GND | a 27 | GND | | |
| GND | b 28 | GND | | |
SPECIAL NOTICE
Sound wiring change
Please follow the speaker wiring instructions to avoid a
distorted sound for the stereo.
The cabinet with one speaker:
Pin 10 goes to ae and run n ground to the negative side of
speaker. -
The cabinet with two speakers: Pin 10 goes to the right speaker Pin J goes to the left speaker and run a ground wire to the negative side of speakers
negative side of speakers.
’