CATHODE RAY TOMES

Cyberball 2072 TM-339 1st Printing Kit

Cyberball (rev 4) (Atari Games, 1988) · Kit Manual · 58 pages · 66 sections · original scan

Page 1

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

A

ATARI

GAMES

Cyberball’ 2072

UNIVERSAL KIT

Installation Instructions

For horizontal displays. Includes:

« Joysticks + Decals

Page 4

Copyright © 1989 by Atari Games

Corporation. All rights reserved. No part of this publication may be reproduced by any mechanical. photographic or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission trom the publisher. The game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the U.S. Copyright Act of 1976. This Act provides for substantial penalties for violating tederal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles. In addition, the Act provides for payment of statutory damages of up to $50,000 per infringing transaction in certain cases, Infringers may also have to pay coste and attorneys’ fees and face an imprisonment of up to five years as well as fines of up to $250,000 in the case of individuals and up to $500,000 in the case of corporations. : Atari Games Corporation will aggressively enforce its copyrights against infringers. We will use ali legal means to immediately halt any manufacture, distribution, or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.

Published by: Atari Games Corporation 675 Sycamore Drive P.O. Box 361110 Milpitas, California 95035

Printed in the U.S.A 10/89

Produced by the Atari Games Technical Publications Department.

Editing and Design: Andrea Dencker

Illustration: Mary Ohanessian Sumner ‘Cyberball 2072 Universal Kit

Notice Regarding Non-Atari* Parts

WARNING Use of non-Atari parts or modifications of any Atari game circuitry may adversely affect the safety of your game, and may cause injury to you atid your players.

You may void the game warranty (printed on the in- side back cover of this manual) if you do any of the following:

  • Substitute non-Atari parts in the game.
  • Modify or alter any circuits in the game by using kits or parts not supplied by Atari Games Corporation,
NOTE This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of Federal Communications Commission (FCC) Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area or moditication to this equipment is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference. If you suspect interference from an Atari game at your location, check the following: + All ground wires in the game are properly connccted as shown in the game wiring diagram.
  • The power cord is properly plugged into a grounded three-urire outlet.
  • On games provided with an Electromagnetic Interference (EMI) ground cage, be sure that the game printed-circuit boards (PCRs) are properly installed on the EMI ground cage and that the end board is securely instalied with all screws in place and tightened. If you are still unable to solve the interference problem, please contact Customer Service at Atari Games Corporation. See the inside front cover of this manual tor service in your area.
Page 5

Cyberbal! 2072 Universal Kit

Contents

1 Installation How to Use This Manual .. Equipment Requirements. Tools Reyutred Preparing the Existing Game for Conversion. Inspecting the Kit... Tustalling die Kit Parts Testing After Power-Up Setting the Coin and Game Options. Gue Play «..... Control Panel Hole-Drilling Template

2 Self-Test RAM and ROM Test Switch Test..

Statistics Screens . Playfield Scrolling Test . Motion Object Test Alphanumerics Test © Joysticl: Pearednres Color Test....... Color Purity Test -6, Convergence Test -6 Sound Test ..... 7

3 Maintenance and Troubleshooting Video Display Sync Problems .

Maintaining the Joystick

4 Illustrated Parts Lists See the list of illustrations that follows.

5 Schematics See the list of illustrations that follows.

Statistics Sheet

Page 6

Figure 1-1

Figure 1-2

Figure 2-1 Figure 2-2 Figure 2-3 Figure 2-4 Figure 2-5 Figure 2-6 Figure 2-7 Figure 2-8 Figure 2-9 Figure 2-10 Figure 2-11 Figure 2-12 Figure 2-13 Figure 2-14

Table 1-1

Table 1-2 Table 1-3

Table 21 Table 2-2 Table 2-3 Table 2-4 Table 2-5 Table 2-6 ‘Cyberball 2072 Universal Kit

Illustrations

Assembling the Cyberball 2072 Kit Parts...... Assembling the Cyberball 2072 Kit Control Panel and Cover........

RAM Error Message . ROM Error Message. Switch Test Screen Coin Options Screen. Game Options Screet First Statistics Screen Second Statistics Screen. Playfield Scrolling Test Motion Object Test ... Alphanumerics Test .. Color Test Color Purity Tes! Convergence Test Sound Test ....

, Figure 3-1

Figure 4-1

Figure 4-2 Figure 4-3 Figure 4-4 Figure 4-5

Figure 5-1

Figure 5-2

Figure 5-3

Tables

Equipment Requirements for Cyberball 2072 Kit. Kit Contents Checklis JAMMA Pin and Wire Connections

RAM Error Locations. ROM Error Locations. Coin Option Settings.. Game Options Settings. Table 3-1 Table 3-2

Table 3-3 Table 3-4 Maintaining the Joystick 3-4

Cyberball 2072 Universal Kit Assembly... Joystick Assembly Joystick PCB Assembly... Cyberball 2072 Game PCB Assembly... 4-4 JSA II Audio PCB Assembly AS

Main PCB Assembly Schematic Diagram (7 sheets)....... JSAII Audio PCB Assembly Schematic Diagram (3 sheets) Memory Map..... 5-2

Troubleshooting Suggestions Voltage Inputs and Test Points on the PCBs a 3-3 What ROM Problems Look Like........... 3-3 Atari Video Connector Pin Assignments... 84

Page 7

Cyberball 2072 Universal Kit

Safety Summary

The following safety precautions apply to all game aperators and service personnel. Specific wamings and cautions will be found in this manual whenever they apply.

WARNING Properly Ground the Game. Players may receive an electrical shock if this game is not properly grounded! To avoid electrical shock, do not plug in the game until it has been inspected and properly grounded. This game should only be plugged into a grounded threewire outlet. If you have only a two wire outlet, we recommend you hire a licensed electrician to install a three-wire grounded outlet, If the control panel is not properly grounded, players may receive an electrical Shock! After servicing any part on the control panel, check that the grounding wire is firmly secured to the inside of the control panel. After you have checked this, lock up the game. AC Power Connection. Before you plug in the game, be sure that the game's power supply can accept the AC line voltage in your location. The line voltage requirements are listed in the, first chapter of this manual, Disconnect Power During Repairs. To avoid electrical shock, disconnect the game from the AC power before removing or repairing any part of the game. If you remove or repair the video display, be very careful to avoid electrical shock. High voltages cantinue to exist even after power is disconnected in the display circuitry and the cathode-ray tube (CRT). Do not touch the internal parts of the display with your hands or with metal objects! Always discharge the high voltage from the CRT before servicing it. Do this after you disconnect it from the power source. First, attach one end of a large. weil-insulated. 18-gauge jumper wire to ground. Then momentarily touch the free end of the grounded jumper wire to the CRT anode by sliding the wire under the anode cap. Wait two minutes and do this again. Use Only Atari Parts. To maintain the safety of your Atari game, use only Atari parts when you repair it. Using non-Atari parts or modifying the game circuitry may be dangerous, and could injure you and your players.

Handle the CRY With Care. If you drop the CRT and

it breaks, it may implode! Shattered glass from the implosion can fly six feet or more. Use the Proper Fuses. To avoid electrical shock, use replacement fuses which are specified in the parts list for this game. Replacement fuses must match those replaced in fuse type, voltage rating, and current rating, In addition, the fuse cover must be in place during game aneratinn

CAUTION Properly Attach All Connectors. Make sure that the connectors an each printed circuit hnard (PCR) are properly plugged in. The connectors are keyed to fit only one way. If they do not slip on easily, do not force them. If you reverse a connector, it may damage your game and void your warranty. Ensure the Proper AC Line Frequency. Video games manufactured for operation on 60 Hz line power (used in the United States) must not be operated in countries with 50 Hz line power (used in Europe). If a 60 Hz machine operates on 50 Hz line power, the fluorescent line ballast transformer will overheat and cause a potential fire hazard. Check the product identification label on your machine for the line frequency required. ABOUT NOTES, CAUTIONS, AND WARNINGS In Atari publications, notes, cautions and warnings have the following meaning: ‘WARNING — Players and/or technicians can be killed or injured if instructions are not followed.
CAUTION — Equipment and/or parts can be damaged or destroyed if instructions are not followed. You will void the warranty on Atari printed-circuit boards, parts Mereon, and video displays uf equipment or parts are damaged or destroyed due to failure of following instructions.
NOTE — A highlighted piece of information.
Page 8

Chapter 1

Installation

How to Use This Manual

This manual provides information for installing, testing, and troubleshooting the Cyberball® 2072 Universal kit. The manual is divided into the following chapters: m= Chapter 1 describes the installation procedure and the Cyherhall 2072 game play. Chapter 2 contains self-test procedures. Chapter 3 contains troubleshooting procedures. Chapter 4 contains illustrated parts lists. Chapter 5 contains the schematics for the game PCB and JSA II Audio PCB. Also bound into Chapter 1 of this manual is the template for drilling the holes for the Cyberball 2072 control panel.

Page 9

Installation

WARNING To avoid electrical shock, unplug the video game cabinet during the conversion. After inspection, plug it only into a grounded 3-wire outlet.

Equipment Requirements

See Table 1-1 for the equipment required in die cabinet in which you are installing the Cyberball 2072 kit.

Table 1-1 Equipment Kequirements for the Cyberball 2072 Kit

Equipment ~ Speeifleation # Color RGB monitor | Video Display a Separate positive horizontat and ve ical syne. or negative composite syn ® Horizontal mounting @ Horizontal frequency 15.750 KHz m Vertical frequency 60 Hz ‘m Reconimended size: 19 inch

@ Video input IV to 3V peak-to-peak positive polarity Control Panel Metal preferred Space Below — At least 41/7 inches deep Control Panel

Speaker Coin Mechanism +5 VBC or +12 VDC

Power Cord

Power Supply Three-conductor with ground +5 VDC ¢ 0.25V @.7.0 amps

CAUTION Do not unplug or plug in the Cyberbait 2072 game printed-circuit board (PCB) edge connector while the power is on. You could seriously damage the PCB.

1-2 Cyberball 2072 Universal Kit

Tools Required

= Two C-clamps Drill with 1/4 inch drill bit, a 1 3/16-inch hole cutter Car 1 3/16-inch chassis punch), and a 1 3/4-inch hole cutter Phillips screwdriver Flat-blade screwdriver Socket set Wire cutters and strippers Straight edge Squeegee X-ACTO™ knife Fast-ons (if you are installing a new JAMMA harness)

Preparing the Existing Game for Conversion

  • Turn off power to the game. 2, Remove the old game PCB(s). Remove the game harness if it is not Japan Amusement Machinery Manufacturers Association (JAMMA)-compatible.
  • Remove all the control panel decals, labels, and controls, 4, Remove any side decals from the cabinet. If your cabinet has wood grain or laminate sides, remove the old graphics and adhesive. If the sides are damaged, repair them before putting on the new decals.
  • Remove and clean the video display plexiglass, display bezel, attraction shield, and marquee, if any.
  • Paint the cabinet, if required.
  • Wipe down and vacuum the cabinet as necessary, including the face of the display.

Inspecting the Kit

Check to see that you have all the parts listed in we kit parts list in Table 1-2. If any part is missing or damaged, please contact your distributor and with the Cyherball 2072 kit serial number, part number and description of any missing or damaged parts, and date received,

Page 10

Cyberball 2072 Universal Kit

Table 1-2 Kit Contents Checklist

Received? Rew

cyberball JAMMA Harness Assy Display Bezel Attraction Fiim w/ Graphics — Attraction Shield 2 Universal Control Panet Decal Control Functions Labels Control Panel Cover Side Panel Decal Left Coinage Decal Right Coinage Decal Product 1D Label FCC Label : : Two 8-Position Microswitch Joysticks: Two Black Button Assemblies ‘wo White Button Assemblies: Four Snap-Action Switches Four Nylon Standoff Four Type AB #6 Screws ‘Twelve Black #10 Carriage Bolts _, Twelve #10 Poly Locks CucOooceecoooveeoooooeN Installing the Kit Parts

Display Bezel Find the display bezel (part no. 047401-01). Measure the size of the existing display bezel and cut the new display bezel to size, if necessary. (See Figure 1-1.)

Product TD and FCC Label Place the product [D label (part no. 038158-01) and FCC label (part no. 039450-01) on the back of the cabinet.

Side Decals : Find the side pane! decals (part no. 047171-01). Wet the left and right side panels of the cabinet with slightly soapy water. Then position the decals as desired. Remove any wrinkles in the artwork using a squeegee. Allow the sides to dry.

Attraction Shield

Find the attraction shield (part na 047205-01) and the attraction film (part no. 047402-01). Using the existing shield as a template, cut the shield and film to size, if necessary. Install them on the cabinet as shown in Figure 1-1.

Video Display _pisplay Plexiglass waza ER previous Game

Figure 1-1 Assembling the Cyberball 2072 Kit Parts

1-3

Page 11

Cyberball 2072 Universal Kit

Control Panel Unpack the Cyberball 2072 control panel cover (part no. 047209-01) and contro! panel decal (part no. 047403-01). Measure your control panel to find out what size the decal and cover should be, Cut the control panel decal and cover to fit. Drilling Holes in the Control Panel Cover

  • Clamp the control panel cover to the control panel.
  • Drill four corner holes through the control panel and the control panel cover. Use a 1/4-inch drill bit.
  • Install’ four carriage bolts and locknuts through the holes to hold the cover and the control panel together.
  • Cut the control panel template out of the manual (see page 1-9). Cut the template down the middle to separate the two parts, one for each set of playef controls.
  • Tape the templates next to each other on the control panel cover. See Figure 1-2 for the controls arrangement.
  • Cut the holes in the cover and panel as shown by the templates using a 1 3/16-inch hole cutter for the button holes and a 1 3/4-inch hole cutter for the joystick knob holes.: Use a 1/4-inch drill bit to drill the mounting holes for the joysticks. ,

‘Control Panel [em

Installing the Control Panel Decal and Labels

Dicascemble the control panel and the control panel cover. Deburr the holes in the cover and the panel.

  • Install the control panel decal on the control panel. Using a sharp knife, cut out the holes for the controis in the decal.
  • Put the control labels on the control panel. (See Figure 1-2.) 4, Install the cover on the control panel with four carriage bolts and locknuts. Installing the Controls
  • Install the black player control buttons on the left player and the white player control buttons on the Tight. (See Figure 1-2.)
NOTE After the buttons are tightened on the control panel, you can put a smal! amount of clear RTV silicon on two or three areas of the focknut to keep the builtoris from being unscrewed from the top.
  • Mount each joystick assembly on the control panel with four carriage bolts and locknuts. Install the joysticks so the Atari Games logos are upright. See Figure 1-2.

‘Screw Figure 1-2 Assembling the Cyberball 2072 Kit Control Panel and Cover

Page 12

3, Install the joystick harnesses on each joystick.

General Harness Installation 1, If your game does not already have a JAMMA harness, find the JAMMA harness (part no. A046501

  • in the kit and install it.
  • Using Table 1-3, JAMMA Pin and Wire Connections, for wiring information, connect the JAMMA harness to existing component harnessing. You can do this using crimp splices or by butt soldering.
WARNING Do not simply tie the wires together. If you do, you could cause intermittent probfems, loose connections, oxtaation, or even a fire.

Connecting Power Wires

  • Connect the wires on the JAMMA harness to the wires for the power supply. You need +5V, -5V, and +12V for the Cyberball 20/2 kit. his kit may © not require all of the voltages used in your original game. Tie off any unused wires on the power supply
  • You will notice that there is more than one wire for each voltage. You must use more than one wire, as called out in the footnotes of Table 1-3. Using more than one wire for each voltage ensures that you do not overload the edge connector and cause it to burn,

Connecting Video Display Wires Connect the wires designated for the RED, GREEN, and RIUE video guns alang with the syne and gronnd wires.

NOTE The JAMMA harness provides only negative composite sync. However if your video display requires separate positive syne, see Chapter 3 for alternative wiring.

Connecting Coin Door Wires

  • Connect the wires on the JAMMA hamess to the coin switches and meter.
  • Connect one side of the door lamps to one of the BK/W wires. Connect the other side of the door lamps to the R wire supplying +5V to the joysticks.

Cyberball 2072 Universal Kit

NOTE Do not use -5V for the coin door lamps. -5V is required for audio. .

(Some games have separate power supply outputs for the coin door lamps. If you choose to use these outputs, make sure you connect both sides of the lamps to the terminals on the power supply.)

  • Be sure to clean the coin mechanisms; however, do not lubricate the coin mechanisms,

Connecting the Control Wires Connect the joystick wires to the JAMMA harness according to the information in Table 1-3. The test screen is in the game self-test, explained in Chapter 2.

Grounding the Cabinet

WARNING Consult a licensed electrician if you're not clear about the following grounding procedure. An improperly connected power cord is hazardous and can cause fatal injuries to players and/or technicians.

Find the ground lead (green) of the 115V input power line. Connect this lead in daisy-chain fashion to a bare metal part of the coin door, control panel, video display, and power supply. This is a safety requirement for the players’ protection. This AC ground must be of #18 AWG wire or larger.

Checking the Cabinet Systems Before plugging in the game PCB, turn on the power to the game, and check +5 Volts on pins 3, 4, C, and D of the JAMMA connector; +12 Volts on pins F and 6; and -5 Volts on pins E and 5. Check that the video display and the attraction lamp have power..

Now turn off the power to the game. The above voltages should be measured, using a voltmeter, with respect to pin 1 (BN wire) and ground.

WARNING Always power down before installing or removing the game or JSA board. Components on these PCBs are very sensitive to power spikes. Removai or installation while the power is on can damage your game board.
Page 13

Installation

Cyberball 2072 Universal Kit

Table 1-3 JAMMA Pin and Wire Connections

Solder Side Component Side .

Note Wire Pin Wire Note Signal

(See Below) Color Color (See Below)

+5V RINiBNBN1+5V RIN
+12V RIN1BNBN1RIN
+5V2RR2+5V
+5V2R/WR/W245V
Vv3OROR3Sv
+12V4YY4+12V

Key Key

COIN CTR2gWwBUAW5COIN CIR1

‘NOT USED

SPKR-|PwBNTPSPKR +*

AUDIO GND NOT USED

GREEN 6 GN R 6 RED

COMPSYNC 6 BN BU 6 BLUE

NOT USEDBK6VIDEO RIN
w7SELE-LESL

Right Player Left Player

COIN 28BK/ORBK/Y8COIN 1
NOT USEDW/BEKNeSPARE
UP9¥/BNW/BN9UP
DOWN 29Y/RWR9DOWN 1
LEFT 29Y¥/ORW/OR9LEFT
RIGHT 2 +9¥/wwy9RIGHT 1.
START/SELECT29Y¥/GNW/GN9‘START/SELECT 1

NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED NOT USED

SW GNDa2BR/WBK/AWa2SW GND
SW GND12BK/WBK/W12SW GND

NC means no connection required for Cyberball 2072. TP means 7. Use this wire if you want an external se! ra twisted pair. er, the Cyberball 2072 kit already has one self-test switch on

  • Connect four of the large BN wires to the SV RTN (GND) ter- the JSA Audio PCB, if you connect an external self-test switch, minal on the power supply unless the power supply has a 1zV first make sure the switch on the PCB is switched off ‘Then RIN. If there is a 12V RTN, connect one of the wires to the connect this wire to the N.O, terminal on the external self-test 12V RTN (GND) terminal, switch. Connect the common terminal of the self-test switch to
  • ‘Three of the R wires 20 to the #5V terminal on the power oe tee ence NEY supply. If the power supply has a +SENSE terminal, connect 3. CONNECT 1 ihe W.W, terminals of Wie wo cull switclies, Gunone of these three wires to the +SENSE instead of the +5V. nect the common terminals of the coin switches to one of the The fourth wire goes to the red wires on the joysticks. BK/W wires.
  • Connect both wires to the SV terminal of the power supply. 9. Connect to the N.O. terminals of the start/select switches.
  • Connect both wires to the +12V of the power supply. ; ene the common terminals of the switches to one of the Gf your coin counter(s) require(s) 12V, you can use one of ; . these two wires for the + side of the coin counter(s).) ‘70. Connect to the gray wire on the joystick,
  • Connect to the negative side of the coin counter(s).If your 42, Connect tu Wie white wite ou tie juyotich. counter(s) require SV, you will need to splice into the red wire 12. Connect one wire to the negative sense terminal of the power that brings +5V to the joysticks. See Note 2, above. Note: Do supply (if it exists). Connect the second wire to the common. not use 24V counters. terminals of the coin switches. Connect the third wire to the
  • Attach to the video display. common terminals of the contro! switches. Connect the fourth i ‘wire to the black wires on the joystick harness.

1-6

Page 14

Cyberball 2072 Universal Kit

Installing the Cyberball 2072 Printed-Circuit Boards

  • Find the Cyberball 2072 PCB Assembly (part no. A047295-01) and install it inside the cabinet. Use the nylon standoffs in the kit. 2, Make sure the interconnect harnesses are installed correctly and are tight. See Figure 1-3.
  • Connect the JAMMA connector to the PCB.
  • Apply power to the game. Check that the game PCB functions. If a video picture is not present, refer to Chapter 3.

Testing After Power-Up

use the self-test to check the Uperaden uf dic yaiue. Refer to Chapter 2 for information about the self-tests. We suggest that you perform a self-test when you first set up the game, each time you collect the money, or when you suspect game failure.

Setting the Coin and Game

Options

‘The Cyberball 2072 coin and game options are set dur. ing the self-test. See Chapter 2 for information about the option settings.

Game Play

This section of the manual describes the theme of the Cyberhall 2077. game and the game play features.

Introduction Welcome to Cyberball 2072, celebrating 50 years of explosive entertainment! Ihe new game includes: approximately 150 new plays (nearly 250 total), new selectable teams, unique robot players, a special challenge “Game Breakers” feature, a beat-the-coach feature, a player upgrade and team improvement (a real coin-grabber), and a selectable simplified game for beginner players. In Cyberball 2072, each player uses an 8-way joystick and button to call the plays and control the action. Before field action starts, the player chooses the plays with the controls. During the play, the joystick controls the robot's direction on the field. On the offense, the button controls the quarterback's passes and laterals. On the defense, the button gives a defensive player ‘Turbo Defense, a quick burst of speed. Cyberball 2072 can be played by one or two players. For variety, players are given a choice of two types of games. “Regulation Cyberball 2072” is a challenge to play against one of six computer-controlled teams. Installation.

“Game Breakers” tests players’ ability to make the big play under presoure oituations. A new simplified game mode has been added for be- -ginner players. It eliminates the need for many decisions that require advanced skills, such as team selection, coach selection (vs. computer), team funds, and all player purchases and upgrades. At the same time, both offensive and defensive play selection decisions have been streamlined to allow more time for on-field action.

Cyberball 2072 rules are similar to football rules, but players must keep the ball from exploding. If the ball explodes, possession turns over. The ball status display sluws whicthies dhe Lall is cool, warm, hot, or crit ical. A critical ball will explode if it is not defused. The player can defuse the ball by moving it over the 50yard line or goal line. On the line of scrimmage, the robot that the player controls is a slightly different color from the others. Each player controls one robot on his team. By pressing a player button before the ball is hiked, the player can control a different robot. New Players: For even more fun, two new players have been added to the game. The Power Back has the option to pass or hand-off the ball again if so desired. This player will keep the defense on its toes! The other new player is the Outside Linebacker. With the ability for great pass coverage, look out for interceptions! Beat-the-Coach: To simulate the excitement of playing against a live opponent, a beat-the-coach feature has been added. In advanced level games, players are asked which coach they want to compete against. Fach coach has a win/loss record displayed. The record is updated as actual players win and lose against these coaches. Game Breakers: An alternative to playing against a computer team is this new special challenge game. Players are presented with a list of situations to execute in order to win big bucks and advance to further levels. Like a “two-minute drill,” thio mode teoto the "skill of players under pressure situations. A complete Cyberball 2072 game has six three-minute periods. Playing with twa players adds more time to the game clock per period. With the Atari buy-in-anytime feature, a second player can enter the action anytime during the game. If a game ends in a tie, there’s a sudden-death period to settle the score. ‘Ihe first team to score is declared the winner. - Choices: Players can select offensive and defensive plays, Umeouts, and replace weak or demulished players.

Page 15

Installation

The new Cyberball 2072 has approximately 250 offensive and defensive plays to choosc from, The offensive player can choose a running play, option play, pass play, or a time-out. After the player selects the type of play, four patterns appear to choose from. The computer chooses these four patterns based on the current ball status and yards to the defuse line or the goal line. Meanwhile, the defensive player can choose a short, medium, or long defense. The computer alsv presents four patterns for the player to choose from. If a Cyberball 2072 robot is damaged during the action by tackles or exploding shrapnel, the player can replace it with a better robot bought with team “funds,” which are awarded for good performance. Two stages of breakdown identify damage to a robot. A smoking robot is the first warning that the robot is tatigued. A robot with smoke and fire means that a fumble will occur if tackled. Special Offers: In “advanced” skill level games, ncw features have been added to allow for multiple up-

1-8 ‘Cyberball 2072 Universal Kit

grades and purchases during the game. At halftime, players may epend any portion of their team funds to upgrade their players. Even multiple upgrades of any one player is possible. Also, if your team is trailing at the end of the first, second, fourth, and fifth periods, you will have the option to use game credits (or deposit a credit at that time) to purchase top-level offensive players or stronger defensive lineups. High Scorc Tables: Two unique high-score tables are used in Cyberball 2072. For games versus the computer, one table records the top scores posted versus each of the four coaches. A second table is used for “Game Breakers,” recording the top money winners under this special challenge format. . End-of-Game Stats: Upon completing a game, a game “stat Summary” 1s shown, It posts the staustical performance commonly evaluated in today’s football, such as total yards, passing yards, running yards, completion percentage and interceptions.

Page 16

PRESS

EITHER BUTTON

TO START

O O L LEFT PLAYER

Page 17

PRESS

EITHER BUTTON

TO START

O

fos) L oelereahk, ui

R RIGHT PLAYER

1-10

Page 18

Chapter 2

Self-Test

‘The Cyberball® 2072 game tests itself and provides visual and audible indications of the condition of the game circuitry and controls. Self-test information is displayed on the screen and through the sound systein. No additinnal eqnipment is required.

We suggest that you perform a self-test when you first

set up the game, each time you collect the money, or when you suspect game failure. The self-test screens provide information about the game circuits and controls, To go into self-test, turn on the self-test switch located on the JSA II audio board in the drawer. If you turn on the self-test switch, aud then turn on the game power, the game performs the RAM, ROM, and communications tests and then the switch test screen appears. If you turn on the self-test switch after the game power has been turned on, the self-test begins with the switch test. To leave the self-test, turn off the self-test switch, and then exit the screen by pressing any right player button. To exit the switch test screen, press any left and any right player button together.

Page 19

Self-Test

NOTE You can perform the self-test two ways. If you turn on the self-test switch first, and then the power switci, ihe sei/-lesl starts with the RAM and ROM test. if you turn on the power first, then the scif-toat awiteh, tho self test begine with the switch test.

RAM and ROM Test

The self-test checks the game RAM and ROM first. It begins by cycling through a series of RAM tects. If an area of RAM fails, it displays a location to check for a bad RAM. If the test finds no RAM errors, then after a 30-second delay, the self-test goes to the ROM test without displaying a message. If the game has no ROM errors, then you will not see a message either. If you have an error in any of these tests and you see a message, you can move to the next test by pressing the right player button. Af you have a RAM error, refer to Table 2-1 for the location of the problem. If you have a ROM error, see Table 2-2 for information about the location of the error. If you think you have a ROM error, but the screen shows no message, look at Table 3-4 for information about the locations of various ROM functions.

Table 2-1 RAM Error Locations

Cyberball 2072 Universal Kit

Table 2-2 ROM Error Locasienns Location on Gazi: PCI:

Error Address

000000U=10C1=10D
020000Us21C1=21D
040000UsisC«LISD

U=27C 1L=27D

Error Message Display Background —_Location Video KAM bad Red 458, 453 Color RAM bad Black 1208, 110F

Figure 2-1 RAM Lrror Message

2-2 Figure 2-2 ROM Error Message

Switch Test

The switch test is shown in Figure 2-3. Use this test to check the controls. As you press the buttons and move the joysticks, the zeros on the screen should change to ones. If they do not, follow the maintenance and repair procedures for the controls in Chapter 3 of this manual. Press any right and any left player button together to move to the next screen.

Page 20

Cyberball 2072 Universal Kit

Coin Options

Check and select the coin options on this screen. The screen is shown in Figure 2-4. To move thrangh the coin options, push the left joystick up or down, You can change the coin option shown in green. ‘The factory default settings are shown in blue. To change an option setting, move the left Joysuck right or left.

Figure 2-4 Coin Options Screen : If you change an option, but then want to change it back to the previous setting, press either left player button. To save the new settings and exit from the screen, press either right player button. If you want to exit the self-test, turn off the self-test switch, and press any right player button to exit the screen. All your changes are saved and you return to the attract mode. The cain optians are explained below. The settings. with defaults, are shown in Table 2-3.

Table 2-3 Coin Option Settings

Option Settings

Game Price One coin + Two coins Three coins Four coins Multiplice 14 2 3 4 5 6 7 8 Bonus Adder None + S

2 coins give 1 extra coin 4 coins give 1 extra coin 4 coins give 2 extra coins 5 coins give 1 extra coin 3 coins give 1 extra coin Free Play (for demonstration mode) + Manufacturer's recommended settings Self-Test

| Game Price is the number of coins required for one tusdit. @ Multiplier is the number of coins each coin counts as in the coin mechanisms. For example, if you se- Ject 2, then each coin comnts as two coins. m Bonus Adder lets you choose bonus coins, no bonus, or free play.

Game Options

Check and select the game options on this screen. The screen is shown in Figure 2-5. To move through the game options, push the left joystick up or down. You can change the coin option shown in green. The factory default settings are shown in blue. To change an option setung, move the lef joystick right or left. If you change an option setting, but then want to change it back to the previous setting, press either left player button. To save the new settings and exit from the screen, press any right player button. If you want to exit the celf-test, men off the self-test switch, and press any right player button to exit the screen. All your changes are saved and you return to the attract mode.

NOTE Not all of the options are shown when you enter this screen. The word More shows at the bottom of the screen to indicate more options. Use the left joystick to scroll through the options.

Figure 2-5 Game Options Screen

Page 21

Self-Test

The game options are explained below. The settings, wilh defaults, aie sow lu Table 2~£. @ Clear High Score Table clears the high score table, if it is set to yes. @ Restore Factory Options allows you to set all the game options to the factory options by choosing yes. If you want to use your own settings, be sure to set this to no. lm Clock Speed sets the amount of time the players receive per play period. ™@ Timer Bar Speeds controls the amount of time given on the timer bar shown on the play selection screen. Titme-Outs Per Period is the number of time-outs a player is permitted per play period m Drone Players’ Intelligence controls the responsiveness of the defensive players on the field. You can choose average. smart, or very smart. The higher the intelligence level, the faster the defense reacts, This setting does not affect the length of play time. § Game Breakers Difficulty adjusts the “ante” levels in each game breakers page. ™ Region selects the region of teams (see Table 2-5). @ Tournament allows you to turn on or off special game offers for tournament play. & Auto High-Score-Table Reset automatically clears the high score table if 2,000 games have been played, and if at least 200 games have been played since the last player entered the high score table.

Table 2-4 Game Option Settings

Clear High Score Table No+

| Restore Factory OptionsYesMo +
| Clock SpeedVery slowSlow|
|Fast +Very Fast|
| Timer Rar SpeedsVery SlowSlowi

Fast + Very Fast

‘Time-Outs Per Periodi+2°

Drone Players’ Intelligence Average 2) Smart + Very Smart

Game Breakers DifficultyEasyMedium +

Hard :

Region Intefnational # West

Central East

Tournament ModeNo+Yes

Auw High-Scure-Table Resut Nu Yeo +

+ Manufacturer's recommended settings

Cyberball 2072 Universal Kit

Table 2-5 Regions

ONAL California Crush | Tokyo Flash ; : New York Thunder Moscow Machine Berlin Invasion London Lightning:

Statistics Screens

Use the information shown on the two statistics sereens and on the histogram screen to keep track of your game use. Record the information on the Cyberball 2072 statistics page in the back of this manual.

The information shown on the two statistics screens (shown in Figures 2-6 and 2-7) is accumulated from the last time the statistics were reset.

Page 22

Cyberball 2072 Universal Kit

At the bottom of the first statistics screen are several times and dates. These are the program version dates. If you are having problems with your game, you may need to give Atari Games Customer Service this information. You can reset the statistics when you are on the second statistics screen by moving the left joystick and pressing any left player button.

First Statistics Screen ‘The first statistics screen shows the following: LefV/Right Mech Coins show the number of coins in each of the game’s two coin mechanisms. § Total Games shows the number of unique games played. A unique game is counted from the first player starting to the last player quitting, regardless of how many times the game was continued, or how many people played. "0 Plyr Min is the number of minutes the game was idle. w 1/2 Plyr Min are the number of minutes the game was played by one or two players. m Error Count shows the number of errors counted in. the erasable memury. If you have a count of more than 75, you should have your game serviced by a qualified service technician. m Total Credits is calculated by multiplying the coins by the credit setting you chose in Game Price, ™ Aug Time Per Credit is the average amount of time in seconds that each credit gave.

Second Statistics Screen The second statistics screen shows the following statistics both as the amount and as a percentage of uke total games played.

Figure 2-7 Second Statistics Screen Beginner Games is the number of games played in beginner ude. @ Comp Coach Games is the number of games played under the beat-the-coach format. - § Game Breakers is the number of games played under this unique format, m1 Period Games is the number of games in which the player(s) playe for only onc period of the complete six-period Cyberball 2072 game. 8 2/3/4/5/6 Period Games show the number of games in which the player(s) played for two to six perinds. m 7-Plus Period Games shows the number of games in which the player(s) played for seven or more périods. ‘Thic means thar the player(s) completed at Jeast ‘one Cyberball 2072 game and started another.

Playfield Scrolling Test

You can test the playfield scrolling circuitry in this screen. Use the left joystick to move left, right, up, and down. The screen is shown in Figure 2-8. Exit the screen by pressing any right player button.

a a

Figure 2-8 Playfield Scrolling Test

Motion Object Test

The motion object test sereen is shown in Figure 2-9. This tests the movement and color of various game objects. Choose a stack with the left player button, Use the left joystick to move the stack. Press the left player button to move to the next stack. Exit the screen by pressing any right player button.

Page 23

Self-Test

Figure 2-9 Motion Object Test

Alphanumerics Test

The alphanumerics test checks the condition of the alphanumerics in the game. The screen is shown in Figure 2-10. If you see an error on the screen, check the EPROMS. at 15N and 16N. Press any right player button to go to the next test.

Figure 2-10 Alphanumerics Test

Color Test

This test indicates the condition of the video display color circuits. The screen is shown in Figure 2-11. The left side of the screen should he black and change to grey in the middle. To the right of the grey the screen should appear red, green, blue, and white from top to bottom. If the screen does not fit this description, see the video display manual included with the game for adjustments.

2-6 Figure 2-11 Color Test Exit the screen by pressing any right player button.

Color Purity Test

The color purity test has five screens. The firet screen is shown in Figure 2-12.

Figure 2-12 Color Purity Test ‘These screens show the condition of the color purity circuit in the video display. Each screen should display a rectangle of color, with no curving at the comers and no lines in the display. The screens are red, green, blue, white, and gray. If the screens are not correct, see Ure videu display manual included with the game for adjustments. Exit cach screen by pressing any right player button.

Convergence Test

The convergence test is shown in Figure 2-13. This test has three screens. The first is white, the second is purple, and the last is green.

Page 24

Cyberball 2072 Universal Kit

ees Wert au Figure 2-13, Convergence Test

Check the following on the screens: @ The grid lines should be straight within 3.0 mm and the lines should not pincushion or barrel. m The convergence of the lines on the violet and white screens chould be within 2.0 mm. If these screens do not meet these criteria, see the video display manual for suggested adjustments. Exit the screen by pressing any right player button.

Sound Test

The sound test indicates the condition of the music and sound effects circuits on the JSA II] Audio PCB. The sound test screen is shown in Figure 2-14, The sound microprocessor resets at the beginning of the test. You will hear the tirst sound three seconds after the test starts. Figure 2-14 Sound Test After the microprocessor is reset and you hear the first sound, the number of game sounds and the sound CPU status information appear. If the CPU is good, the word “Good” appears. If you get an error message at any point in the sound test, see Table 2-6 for more information. The test cycles through the following tests: @ Music Chip Test @ Sampled Audio Test @ SCOM Reset Test Use the left joystick and the left player buttons to seject sounds and listen to them. To leave the self-test, switch off the self-test switch, and then press any right player button, You will return to the attract mode.

Table 2-6 Faulty Sound RAM and ROM Locations

Location on Error Message JSA Audio PCB ‘Music Chip Time Out 3A Sound CPU RAM 1 Error 2B Sound CPUROM1 Error 1B If this message appears when you enter the sound test, the sound processor.can- | not proceed any further. Press the left jump button to exit the test. i Communications Error #1 3D Counts the number of errors caused by the audio or game PCB. This means that the SCOM chip (part no. 137526-001) on one of these boards is bad.

CAUTION The SCOM chip is a CMOS IC and is static-sensitive, If you do not handle it properly, you can permanently damage it. See the section Static-Sensitive Devices, in Chaptor 3, for mora information. Communications Error #2 Probably the audio PCB is disconnected from the game PCB, or the chip at 1D is not inserted into its socket. Sound Processor Not Responding ‘A major problem with the audio PCB. if you cannot enter the self-test, the hamess may be disconnected between the audio PLB and the game PUB, -
Page 25

Chapter 3

Maintenance and Troubleshooting

This chapter contains regular maintenance information, troubleshooting tables, and repair procedures for your Cyberball 2072 game. The chapter has two parts. The first part contains three trauhleshanting tahles One table has general troubleshooting information, the second contains the voltage levels and test points on the PCBs, and the last is a table of ROM-caused problems with specific ROMs ww check and replace. The last part of the chapter has information about connecting the video display to the Cyberball 2072 kit and maintenance procedures for the joystick. If a part is mentioned, but not illustrated, see Chapter 4, Mlustrated Parts Lists, for information.

Video Display

Sync Problems

a) i Some video displays cannot use the composite

ia negative sync that is on the JAMMA connector. The

Cyberball 2072 kit includes 2 standard Atari video connector that provides separate positive sync. Refer to Table 3-4 and make the appropriate connections for your video display. For other problems, see the video display manual that came with your game.

Joystick Procedures

The joystick provides your game with precise movement and speed control of the player’s character. For best performance, lubricate the joystick regularly. Maintaining the Joystick Maintain the joystick by inspecting the pivot ball, actuator half-ball, and the shaft and lubricating the joystick with lithium grease.

  • Turn off the power to the game.
  • Open the control panel and disconnect the harness connector.
Page 26

Maintenance Cyberball 2072 Universal Kit

Table & 1 Troubleshooting Suggestions

| Problem i Suggested Action | Coin Mechanism Problems Test the coin mechanisms with the ‘sound tes: sete { Game Play Problems (1, Check the harness and connectors. 5, : ~) 2, Perform the self-test. :

  • Check the voltage levels on the. PCBs. See Table 3-2, Vollage Inputs and Test Points. : : 4, Check What ROM Problems Look Liky, Table 33, for specific ROM. problems. 4 vA screen character does not Check the connections. “move or moyes intermisiently.
  • Has the: joystich been Jubricated with witite Hihiuns grease? If rot, Rabie . Check the harness and connectors. If you took the joystick apart, have you reassembled ir Gorrecily? Make sure all the parts on the joystick are in good es Fepate or repli Fens Joystick Problems ew

Make sure the actuator is installed correctly. Lubricate the joystick. The handle does not immediately return to center. Check if the screws bolding she joystick assembly coger a are 100.1 Lubricate the assemb! yen ; A joystick handle sticks.

Is the speaker volume turned. up? Check the audio ROM and RAM in the self-test on'the Sound ‘Test screen. See Tabie 2-4, Bad Sound RAM and ROM Locations. . Check the voltage level to the JSA II Audio PCB, See Table 3-2, Voltage Inputs and z Test Points. . . Check the wiring from the JSA II Audio PCB to the speaker. Replace the speaker. Ne

we

al

Video Display Problems | Screen is Dark fs the game plugged in? i fs the game turned on? Are the.connecticns good? : Ss Check all of the items below. If you can dnswet nolo any question, you have a problem with the video display. See your video dispiay'service manual. a, Do you have power to the video display? b. Are-the video display's filaments lit? c. Do you have high voltage to the video display?” Ts the voltage level to the video display PCB.correct? (Power voltage is 100 VAC or 110 VAC, dependitig on the type of video display. Video signal voltage is 0.5 to 3.5 Volts.) If the level is not correct, check the connectors and the hamess. Cheek the +12 Vand the #10 V circuit on game PCB. Check the voltage to the video display PCB,

Do you have high voltage to the video display? “

oe

vi

as

Display area wavers oF is

too small © he ‘ “Convergence, purity _. Use the screens in the self-test to adjust the video display." or led problems Game is Stuck self-test Make sure the self-test switch is switched off. If it is switched on, then: the game will be, in-selftest.

  • Remove the joystick from the control panel. Use a 5. Take off the 8-position plate, the actuator, and the 3/8-inch wrench to remove the nuts and washers lower housing. that hold the joystick on the control panel. 6. Check the actuator half-ball, the pivot ball, and the
  • Kemove the four long screws that hold the joysuck shaft for dist and wear. together. See Figure 3-1.

3-2

Page 27

Cyberball 2072 Universal Kit Maintenance

Table 3-2 Voltage Inputs and Test Points on the PCBs_ Hee Test Point. PCB Voltage °° or LED “Main +5 40.25.VDC' VCC Logic power from the switching power supply. Main . °Y CRI LED Lights when 3 V is applied to the:main- PCB an the téset asp jumper . % is open ‘Audio Audio Audio Lights when the -5 V supply is good. Lights when the +5 V supply is good. Lights when the +12 V supply is good (but on has a 12 V resistor at Q3 on'it). TT Audio

Table 3-3: What ROM Problems Look Like

“ROM Causing Problem =” Ch Problem

Program works but letter ind numbers appear wrong. *- Alphanumeric Program works and the playfield locks OK, but the motion Motion object gbjects are wrong, GIN, 611, 66N, 55L,.55N, 90L, 43L, 43N, 78L, 10K, 16F, 16K, 10F Program works, motion objects look OK, but the playfield is wrong. Garbage on screen; program doesn’t work, Game Program is erratic. Playfield

Video processor 2204 Video program LOC, 10D, 21, 240, ROMO, 1, 2,3,4,5,6,7 15D, 15C, 27¢, 27D 1B on the JSA If Audi | No souind or erratic’ sound. Audio ROM

  • Lubricate the actuator half-ball on the end of the Table 3-4 Atari Video Connector joystick shaft, the pivot ball below the upper hous- 5 5,

ing, and the spring inside the upper housing. Use Pin Assignments

lithium grease.

  • Put the joystick assembly back together. Fit the pin in the pivot ball into the slot in the lower housing.
  • Replace the long screws and lighten them. Do not over-tighten the screws. The joystick handle must return to center easily.
NOTE Do not tighten the long screws too much. If you do, the handle will be difficult to move and players may become frustrated with the game.

10, Replace the joystick assembly on the control panel. 11, Use the Self-Test to make sure you have reassembled the joystick correctly.

Page 28

‘Maintenance

4 Lithium Grease

Snap Action Switch

Cushion Ring

8 Position Plate Ball-Shaped Handle and Shatt

#8-16 X-Rec ‘screw ™ GD) 086" Dia Rot Pin ~N

Actuator Half-Ball

Figure 3-1 Maintaining the Joystick ‘Cyberbail 2072 Universal Kit

Disc. “a

Phinger Spring

Plunger |__ Upper Housing Assembly

| Upper Housing I Lo

Page 29

Chapter 4

Illustrated Parts Lists

This chapter provides information you need to order parts for your kit, The parts lists (except for the PCB parts list) are arranged alphanumerically by Atari part number. All “A-” prefix nu: which are assemblies, come first. Next are part numbers with six numbers followed by a hyphen (000598. through 701000-) Ending the list are part numbers with a two-number designation followed by a hyphen (00- through 99-). The PCB parts list is arranged in alphabetical order by component. Within each section the parts are arranged numerically by part number. When you order parts, give the part number, part name, the number of this manual, and the serial number of your kit. With this information, we can fill your order rapidly and correctly, We hope this will create less downtime and mare profit from your kit. Atari Games Customer Service telephone numbers are listed on the inside front cover of this manual.

Figure 41 Cyberball 2072 Universal Kit Assembly A047400-01 B

Parts List

Part No. Description Part No. Description

A047295-01Cyberball 2072 Board Set Assy, consisting047209-01Control Panel Cover
of the following items:047401-0119-inch Display Bezel with Graphics
A04/066-01Cyberball 20/2 PCB Assy047402-01Universal Attraction Film with Graphics
A047184.01 —_ JSA II Audio PCB Assy047403-01Universal Control Panel Decal

178275-016 1" PCB Support Standoff 047404-01 Control Functions Labels

A040933-03&-Position Microswitch Joystick160044-001Snap-Action Microswitch
A046501-01JAMMA Harness Assembly177010-240#10-24 Poly Locknut
038158-01Product ID Label178114-032Polypropylene, Clear, 2-Inch-Wide Tape

039450-01 FCC Label 178237-003 Black Button Assembly

046184-01Left Coinage Decal178237-004White Button Assembly
046184-02Right Coinage Decal178265-001Nylon Standoff
047091-01Side Panel Decal72-6612SType AB, Cross-Recessed, #6 x 3/4-Inch-
047205-01Attraction ShieldLong Screw

75-5116B #10-24 x 1-Inch-Long Carriage Bolt TM-339 Cyberball 2072 Universal Kit Installation Instructions

Page 30

Mlustrated Parts Lists Cyberball 2072 Universal Kit

107027-001 040304-01 Lithium Grease Ball-Shaped Handle and-Shaft =

043696-01 Plunger Spring

Lower Housing e 4

60042-001 | ‘Snap-Action | ‘Switch

a 044300-01 Cushion Ring 099716-01 I

i

| Pivol Ball '

73-20826 -125" Dia Roll Pin

x 7o-cos09 939717-03 .086" Dia Roll Pin & Position Plate paneea-ot _j Actuator Haif-Ball

Figure 4-2 Joystick Assembly A040933-03 G

4-2

Page 31

Cyberball 2072 Universal Kit Mlustrated Pars Lists

Figure 4-3 Joystick PCB Assembly Parts List

Part No. Description Part No. Description

404093201Upper Housing Assembly040693-01Actuator Ball
039712-01Plunger041287-01Lower Housing
039713-01Disc043696-01Pregressive Plunger Spring
039714-01Actuator044390-01Cushion Ring
039716-01Pivot Ball107027-001Lithium Grease
039717-038-Position Plate160044-001Snap Action Switch
039722-01Upper Housing1760018-0038-16 Phillips Head Screw
040304-01Ball-Shaped Handle and Shaft176030-110#4-20 Hex Washer Head Screw

73-20509 ‘Small Roll Pin 73-20824 Large Roll Pin

Page 32

A047066-01 C Figure 44 Cyberball 2072 Game PCB Assembly _ mw | Led oro 03 3 ~ 2) ose) Of) = 0] $= BH] Boe Illustrated Parts Cyberball 2072 Universal Kit

Page 33

Ilustrated Parts Lists Cyberball 2072 Universal Kit

136071-XX43

TDAZ030 136074-XX45

  • 136071-xx¥6 2? = LS86 Ls74 atin © 1375¥4-01 = 22] 0 Cl 137574-001 om , + I,

137401-001 Fh, fe LS238 a 137526-001 Lsa74 4Ob6B a anna eaQ of 22 fp} = J P=] a Ls240 . 136056-2101 fa | 006 t (ica oe} fas |

= § a O 3" dl 137577-001 ee | XX42 eenienl af ccmiPs

a ™

Figure 4-5 JSA II Audio PCB Assembly A047184-01 B

Page 34

Chapter 5

Schematic Diagrams

Abvuut this Chapter... This chapter contains the schematics and wiring diagrams for your Cyberbali 2072™ game. They are arranged in the following order: Game PCB, JSA II Audio PCB, and Memory Map. (The PCB assembly drawings are illustrated in Chapter 4.)

Page 35

5-2 La RLS R12

Cyberball 2072 Universal Kit

BERSEERS

Pitt stot kd

Page 36

Cyberball 2072 Universal Kit

mot AUD-32

  • ‘AUD-39 AUD 1 > AUD-40 u0-31 AUD 33 RUD-4 eu0-7 uUO-8 AUD 13 m0-a4 PUO-16 AUD? AUD@18 AUD-22 AUD-24 fu0-t6 U0-28 PUD-30 aw 20 RUD-20 AUD~34 iM 1H ayo-37 Bie

+5.

sets

eS me aun-o9 Bea aon F or

rae acer an

pu0-23

AUD-25

Figure 5 1 Cyberball 2072 PCB Assembly Schematic Diagram, Sheet 1 of 7

047067-01 € Schematic Diagrams

Page 37

Schematic Diagrams Cyberball 2072 Universal Kit

ja CLK ind ‘R23

fue a3 aia

Page 38

Cyberball 2072 Universal Kit Schematic Diagrams

ARBRERGES PLPUGeer eter

oe

fasfesitar
bedyeSa

ke SS Rita, BIR wy ous

aime]liea &siis-23
pao]ila soe

ne Ha otto;

fsvscent

i i

acdwer[a

i wes cs ee Iz is

iH PERBEARERE 3ER92ER2 stele fe

If

Figure 5 1 Cyberball 2072 PCB Assembly Schematic Diagram, Sheet 2 of 7 04706701 C

5-5

Page 39

Schematic Diagrams Cyberball 2072 Universal Kit

ae

nes e5er—Pot reset tesa / URES vole ees et aA Ge BE sinc ae aa

ote" een \acne roa

ZSLIP PE -7SPC AVSCROLL,

5-6

Page 40

Cyberball 2072 Universal Kit

nS asst

era Soeee Se Schematic Diagrams

Figure 5-1 Cyberball 2072 PCB Assembly Schematic Diagram, Sheet 3 of 7

047067-01 C Reig, S27] ial sREMCEL:

5-7

Page 41

‘Schematic Diagrams Cyberball 2072 Universal Kit

TWAT

—eraLy Pale

preur—y roe a praie— Foe | me

eu I |

a oe veraae sas

ae ais po a a a ta

an ait F rae ote. a wi nee F So 2 + ot fn fe “L30b spray?. Pee /PFRI 6warp &

a

10 % ab = 7

‘asta SO

Page 42

‘Cyberball 2072 Universal Kit Schematic Diagrams

18273 sera

r aiisez| AND « dp aay $3

Bi » a ie, cu sinc. AHS TNC? eu Only R87 is normally stuffed. R88 and R89 are horizontal shift options. Only one positiun slivuld be stuffed. sea

usea peourses g Poe Bion

ERSERRS

Fy

g

ce aS Gi BERGE

: 33 = PF MST SH sre]

Figure 5.1 Cyberball 2072 PCB Assembly Schematic Diagram, Sheet 4 of 7 47067-01 ¢

5-9

Page 43

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 44

Cyberball 2072 Universal Kit Schematic Diagrams

jase

Baits 259,

ef a6 35,

ap BERELaIE HARSERISRSEEE i

IgeRa ease

/ROROMOE

  • iis era m0. 203 Sige arp ros7ve yo: meena. vi loo oreat 22 me. U0 —_ Sve se0. cae rr MO. 7.0—Fd.9
  • Fine atm Tepe

A est 2 a Nap [nas + a lms THT te i Bey Tessie itty aise panied son et opts ekg a a

ate or=Ser orbit
aeoaa
zs 35|Sas site
jas On|Fslan on
lateetee
.aeastaHE
eedoe[sao

ew ee

  • ee e PORE POR DHE. HORS. —rorona | - PrOROR A _ 4

+

a et

Ligure 5-1 Cyberball 2072 PCB Assembly Schematic Diagram, Sheet 5 of 7

047067-01 ¢

5-11

Page 45

Schematic Diagrams

5-12 i +

an

eae Cyberball 2072 Universal tii:

Page 46

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 47

Schematic Diagrams Cyberball 2072 Universal

=bS DED seas

5-14

Page 48

Cyberball 2072 Universal Kit Schematic Diagrams

ewe (v7——yen Pr eye ees es es eave lhe iB-ve. ea, Priveapinja 3 4 7, es 3

wera

Eco

e274

a} col | reRany 12/29/60 nb. i 738,

tseas

vID-14 wee

vine

vip-19

Figure §-1 Cyherhall 2072 PCR Assembly Schematic Diagram, Sheet 7 of 7

047067-01 €

5-15

Page 49

Ors GRARGHRE cSSud.e> 29-694 2h 0E 162° aa"e'0'29 suresBerg SeWatpIS vai resrpamun] 7c0z meqzeqd

Page 50

‘Cyberball 2072 Universal Kit Schematic Diagrams

Figure 5-2 JSA I Audio PCB Assembly Schematic Diagram, Sheet 1 of 3 04648701 D

5-17

Page 51

Schematic Diagrams Cyberball 2072 Universa’ i

BERSSeR

BRRESBLA versie

5-18

Page 52

Cyberball 2072 Universal Kit Schematic Diagrams

242% 8

Figure 5 2 JSA Il Audio PCB Assembly Schematic Diagram, Sheet 2 of 3 046087-01 D-

5-19

Page 53

Schematic Diagrams Cyberball 2072 Universal Kit

Jt-27

Ji-21,

41-28)

5-20

Page 54

Cyberball 2072 Universal Kit Schematic Diagrams

Figure 5 2 JSA Il Audio PCB Assembly Schematic Niagram, Sheet 3 of 3

046487-01 D

5-21

Page 55

Cyberball 2072 Universal Kit Schematic Ciaguncen:

Memory Map of Video Processor

ADDRESS BUS DATA BUS zeez 1411 1111 1190 9e00 oG0e 2412 200 9000 9000 ‘ADDRESS | Summ | 3210 9876 5432 1098 7654 3220 © |-RY/W | 5432 1098 7654 3210 | = FRICTION

000000 - 0O7FFF| 16KW | 0— -000 DARA AAAA AAAA AAAA|R| DDDD DODD DODD DODD | SHORT ABSOLUTE PROGRAM PROM
008000 - OOFFFF| 16KW | O— -000 BBA AAAA AAAA AAAA| R | DODD DODD DODD DODD | SLAPSTIC PROGRAM PROM
010000 — oarrrr| 224i@ | 0AAA AAAA AAAA AAMA AA1 R_| DODD DODD DODD DDD | LONE ABSOLUTE DROGPAM PROM
C0000|[1-110 000- — — —IR otDDD DDD { SWITCH 1 (PLAYER 1)
I11!pp|UNUSED
I11tD|LEFT ACTION
f111n(ene (ORURT AP MENT AAT.
|1l|DDDD |_LEFT PLAYER JOYSTICK (L,R,D,U)
Fcz000I[1-110 00- — — —irk|DDD DDDD ; SWITCH 2 (PLAYER 2)
I1l1pp|uNusED
|1'iD|LEFT ACTION
i1fl'D1UNUSED
|11IDDDD |_LEFT PLAYER JOYSTICK (L,R,D,0)
FC4000i1 a~~100 010- — — —1| Depo| status
I11i)|SELF-TEST (ACTIVE 10)
It1iD|VBLANK
1111D|AUDIO BUSY (ACTIVE 10)
411io.|UNUSED
FC6000t}a—-100 o1- — — —1 oR|DDDD DOOD | AUDIO READ
FC8000 - FC83FE©} S12B | I~ ~100 100- —AA AARA AAA1 orm |DDD DDOD | EEROM
FCAO0O0 - FCAFFE} 2K | 1— -100 101- AAAA AAAA AAAO| R/@ | DODD DDD DODD DODD | COLORAM
¥D0000i| i+ -103 s00- — — —1 ow|| BEROM UNLOCK
FD2000i|i 101 001- — — —JW|| AUDIO RESET
FD4000i{i -10f o0- — — —18|| WATCH DOG
FD6000iTi+ -tololl- — — —1 ow®|{ VIDEO IRQ ACKNOWLEDGE
FD8000i{4-101 190- — — —ow}DDD DDD | AUDIO WRITE
FF0000 - FFIFFF| 4KW | 1— ~111 000A AAAA AAAA AMAA| R/W | DDPD DODD DODD DDDD | PLAYFIELD PARAMETER RAM
FE2000 - FF2FFF|24% | 1— -111 0010 AAAA AAAA AAAA| R/W | DODD DODD DDDD DODD | ALPHANUMERICS PARAMETER Kam
FF3000 - FFIFFF| 2KW | 1— 111 0011 AAAA AAAA AAAA| R/W® f DDDD DOOD DODD DDDD | MOTION OBJECTS PARAMETER RAM
FP4000 - FFFFFF| 24KW | i-- -111 AAA AAAA AAAA AAAA| R/W | DODD DODD DDDD DODD | PROGRAM RAM

Figure 5 3 Memory Map

5-22

Page 56

Cyberball 2072" Statistics Sheet

Statistics Screens

First Statistics Screen Second Statistics Screen

Left Mechanism Coins Percent Right Mechanism Coins _ Game Breakers _

Total Games Beginner Games 0 Player Minutes Computer Coach Games 1 Player Minutes Game Breakeis 2 Player Minutes 1 Period Games Error Count 2 Period Games 3 Period Games Total Credits 4 Period Games Average Time per Credit 5 Period Games ; 6 Period Games 7-Plus Period Games

ome, ° > = m

Page 57

Seller warrants that its printed-circuit boards and parts thereon are free trom defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays and laser-video dise players (in games supplied with displays and videudisc players) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products o parts therenf are warranted If the products described in this manual fail to conform to this warranty, Seller's sole liability shall be, at its option, to repair, replace, or credit Buyer's account for such products which are returned to Seller during said warranty period, provided:

  • Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
  • Such products are returned prepaid to Seller's plant; and
  • Seller’s examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misjuse, neglect, alteration, improper repair, installation, or improper testing. In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages. Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms herein, this warranty is expressed in lieu of all other warranties expressed or implied, including the im-

plied warranties of merchantability and fitness for a particular purpose, and of

all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person w assume for the Seller any other liabilities in con nection with the sale of products by Seller.

The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to you and others. Be very cautious in using non-Atarisupplied components with our games, in order to ensure your safety. Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari Games Corporation cannot be responsible for the quality, suitability or satety of any non-Atari part or any modification including labor which is performed by such distributor.

Page 58

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.