Die Hard ST-V Cartridge Quick Setup
Die Hard Arcade (UET 960515 V1.000) (Sega, 1996) · Document · 1 pages · original scan
Page 1
SEGA __ Die Hard Arcade
ST-V Cartridge - Quick Setup
Should be done by Service Personnel only!
Die Hard arcade software is a modular game cartridge for the ST-V Titan Cabinet. You simply insert the cartridge onto the Game Board located behind the rear service door of the Titan Cabinet. For shipping purposes, the Cartridge is inside the cash box. Here are directions for installing the game:
- Open the rear service door of the Titan Cabinet by removing the two shipping screws and using the key.
- Turn the power OFF for the Cabinet.
- Carefully insert the Game Cartridge into the game board. The angle of insertion is predetermined and excessive force can cause damage to the cartridge.
Die Hard Arcade Game Cartridge
- Be sure that the Game Cartridge is inserted properly. The cartridge is inserted vertically onto the Game Board, with the back side facing away from the Board, as shown in the adjacent photo. a . 8) Simply follow the prompts on the screen. Refer
- Close the back d f the Titan Cabinet. ) lose te, back daer or te Titan Senne to the Die Hard Arcade Game Service Manual for
- Turn the Power ON for the Cabinet. further details.
- You can adjust the coin settings (Coin Assignments Screens) and game play options (Each Game Test Screens ) by using the Service and Test buttons. Open the Control Panel by unlocking the two locks located underneath it. Swing open the Control Panel and note the Service and Test buttons on the hinge of the Control Panel. Push the TEST button to have the ST-V Test Menu appear. Use the Service button to select a setting and Test button to enter the selection. Select Exit to finish.