Daytona USA Upright Owners Manua Preliminary
Daytona USA (Revision A) (Sega, 1994) · Owner's Manual · 20 pages · 10 sections · original scan
= U
UPRIGHT
ER’S MANUAL
SEGA ENTERPRISES, LTD. TVONVIA AUVNOALTAd
NOTICE
THIS MANUAL IS A PRELIMINARY MANUAL ONLY, AND THE INFORMATION CONTAINED IS TO ASSIST QUALIFIED SERVICE PERSONNEL IN INSTALLING AND SETTING UP THE EQUIPMENT QUICKLY. ANY QUESTIONS RELATING TO DETAILS ON INSTALLATION AND SERVICING NOT COVERED BY THIS MANUAL ARE TO BE DIRECTED TO THE APPROPRIATE SEGA’S DISTRIBUTOR OR TO THE SEGA CUSTOMER SERVICE DEPARTMENT.
Our customers should note that contents of this manual may not accurately described all of the features of the game received. As a result, descriptions in this manual are subject to change without prior notice.
Sega has received a tremendous demand for this game, and we are experiencing a delay in the development of the manual. We apologize for this delay and appreciate your patience and understanding. We will resolve this delay quickly, and we will send the final draft of the manual to you as soon as it becomes available.
- HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure theat the player can enjoy the game safely.
°
Also, for the IC board circuit inspections, Be sure to turn the power off before working on the machine.
To insert or pull oul the plug quickly is dangerous.
Itis necessary to make sure that the power cord or the grounding wire is not exposed on the road, etc. in a manner so as to be dangerous. Make sure that grounding connections are made safely at the position where so specified.
Do not use any fuse that does not meet specified rating. Make complete connections for the IC board and other connectors. Insufficient insertion is very dangerous.
The operating (ambient) temperature range is from 5°C to 40°C.
When cleaning the CRT surfaces, use a soft, dry cloth. Do not apply chemicals such as thinner, benzine, etc.
only the logic tester is allowed. The use of a tester is not permitted, so be careful in this regard.
After confirming that there are no irregularities, turn the power ON.
‘
© TURNING THE POWER ON
Turning the AC UNIT’s MAIN SW on will cause the machine to start the POWER ON check and NETWORK check automatically.
In the POWER ON check, the steering wheel turns left and right, then returns to the centering position and stops. In this check, the values of V.R. inside the control panel are corrected. Until the check is finished (the steering wheel stops automatically), do not touch the steering wheel or play the game.
If you do, the steering wheel reaction during the game (reaction at the time of a course-out or crashing) can not be obtained correctly.
In a case of a strange reaction during the game, turn the power on again from the beginning and complete the power-on check.
LINK 1D MASTER CAR NUMBER 1 CABINET Tin
COUNATY JPN
DIFFICULTY NORMAL
ADVERTISE SOUND ON GAME MODE NORMAL
CREDIT TO START XX CREDIT (S)
COIN/CREDIT SETTING #XX
The steering wheel turns left/right automatically. FIG. 6.11
> 15
S) After the game is started, the allotted time decreases. Passing a check point allows the game to continue with the previous remaining time added to the time limit up to the next check point. If you fail to pass a checkpoint within the time limit, the game will be over.
- In case of a course-out or crash, the steering wheel reacts.
When you finish 8 laps, 4 laps and 2 laps, which respectively corresponds to the BEGINNER, ADVANCED and EXPERT course, the game will be over. The lap setting can be changed for specific attraction event purposes. 10)
- The player whose results are excellent is allowed to register his name. Turn the steering wheel to choose the alphabetical letters and step on the accelerator to effectuate the selection. The name will be displayed on the DEMO screen.
- In the case you do not play “vs.” competition, when choosing AUTO or MANUAL, stepping on the Accelerator while pressing the start button will result ina TIME ATTACK mode in which no competitor car will appear and only the player’s car will run.
BRAKE PEDA) ACCEL.
FIG. 7.2
PLAYING TECHNIQUE
It is recommended that you choose AUTOMATIC if you are not so familiar with the game. Also, note that choosing V.R. SW No. 2 (blue) or No. 3 (yellow) allows for better perspectives. At the corners, be sure to drive slower. Refrain from abruptly turning the steering wheel to avoid an accident. In this game, skillful braking is
When MANUAL SHIFT is chosen, refer to the engine r.p.m. for shifting. SHIFTING UP immediately before the indicator indicates the red zone allows the acceleration to be made in the most efficient manner.
aS " ao
8-3 BOOKKEEPING
Selecting the BOOKKEEPING in the menu mode causes the bookkeeping data up to the present to be displayed on 2 pages.
- Press the TEST SW or START BUTTON to return to the MENU mode screen
- Press VRi (red) to proceed to the other page.
BOOKKEEPING a
COIN CHUTE #1 XXXXXXXX COIN CHUTE #2 XXXXXXXX TOTAL COINS XXXXXXXX
COIN CREDITS XXXXXXXX SERVICE CREDITS. XXXXXXXXK TOTAL CREDITS XXXXXXXX
NUMBER OF GAMES XXXXXXXX
TOTAL TIME XDxxHxxWxxS GAMES PLAY TIME xDxxHxxWxxS, AVERAGE GAME TIME XxWxxS, LONGEST GAME TIME xxWxxS SHORTEST GAME TIME. xxWxxS
START TO EXIT RED TO OTHER PAGE
Le
FIG. 8.32 BOOKKEEPING
© COIN CHUTE #*: Number of coins put in. As seen from the front of the cabinet, the right-hand side is #1 and the left-hand side is #2.
¢ TOTAL COINS: Total number of activations of coin chutes.
- COIN CREDITS: Number of credits registered by inserting coins.
© SERVICE CREDITS: Credits registered by the SERVICE switch.
- TOTAL CREDITS: Total number of credits (COIN CREDITS + SERVICE CREDITS)
¢ TOTAL TIME: The total energized time.
TABLE 8.2 COIN/CREDIT SETTING (COIN CHUTE COMMON TYPE)
FUNCTIONING OF COIN CHUTE #1 FUNCTIONING OF COIN CHUTE #2 NAME OF SETTING
| SETTING #1 | 1 COIN | 1 CREDIT | 1 COIN | 1 CREDIT | |
| SETTING #2 | 1 COIN | 1 CREDIT | 1 COIN | 2 CREDITS | |
| SETTING #3 | 1 COIN | 1 CREDIT | 1 COIN | 3 CREDITS | |
| SETTING #4 | 1 COIN | 1 CREDIT | 1 COIN, | + CREDITS | |
| SETTING #5 | 1 COIN | 1 CREDIT | 1 COIN | | § CREDITS | |
| SETTING #6 | 1 COIN | 2 CREDITS | 1 COIN | 2 CREDITS | |
| SETTING #7 | 1 COIN | 2cREDs | | | 1 COIN | 5 CREDITS |
| SETTING #8 | 1 COIN | 3 CREDITS | 1 COIN | 3 CREDITS | |
| SETTING #9 | 1 COIN | @ CREDITS | | | __1 COIN | ‘+ CREDITS |
| SETTING #10 | 1 COIN | 5 CREDITS | 1 COIN | 5 CREDITS | |
| SETTING #11 | 1 COIN | 6 CREDITS | [| | _1 COIN | 6 CREDITS |
| SETTING #12 | 2 COINS | 1 CREDIT | 2 COINS | 1 CREDIT | |
| SETTING #13 | 2 COINS | 1 CREDIT | 1 COIN | 1 CREDIT | |
| SETTING #14 | 2 COINS | 1 CREDIT | 1 COIN | 2 CREDITS | |
| SETTING #15 | 1 COIN | 1 CREDIT | 1 COIN | 1 CREDIT |
- COINS 3. CREDITS
| SETTING #16 | 1 COIN | 1 CREDIT | 1 COIN | 3 CREDITS |
2 COINS 3. CREDITS
| SETTING #17 | 3 COINS | 1 CREDIT | 3 COINS | 7_CREDIT |
| SETTING #18 | 4 COINS | 1 CREDIT | 4 COINS | 1 CREDIT |
| SETTING#I9. | | ‘1 COIN | 1 CREDIT | {1 COIN | 1 CREDIT |
| 2 COINS | 2 CREDITS | 2 COINS | 2 CREDITS | |
| 3 COINS | 3 CREDITS | 3 COINS | 3 CREDITS | |
| 4 COINS | 5 CREDITS | 4 COINS | 5 CREDITS | |
| SETTING #20 | 1 COIN | 1 CREDIT | 1 COIN | 5 CREDITS |
2 COINS 2 CREDITS
3 COINS 3 CREDITS
4 COINS 5 CREDITS
| SETTING #21 | 5 COINS | 1 CREDIT | 5 COINS | 1 CREDIT |
| SETTING #22 | 3 COINS | 1 CREDIT | 5 COINS | 1 CREDIT |
5 COINS 2 CREDITS
| SETTING #23 | 2 COINS | 1 CREDIT | 2 COINS | 1 CREDIT |
| 4 COINS | 2 CREDITS | 4 COINS | 2 CREDITS | |
| 5 COINS | 3 CREDITS | 5 COINS | 3 CREDITS | |
| SETTING #24 | 2 COINS | 1 CREDIT | 1 COIN | 3 CREDITS |
4 COINS 2 CREDITS
5 COINS 3 CREDITS
| SETTING #25 | 1 COIN | 1 CREDIT | 1 COIN | 1 CREDIT | ||
| 2 COINS | 2 CREDITS | 2 COINS | 2 CREDITS | |||
| 3 COINS | 3 CREDITS | 3 COINS | 3 CREDITS | |||
| 4 COINS | 4 CREDITS | 4 COINS | 4 CREDITS | |||
| 5 COINS | 6 CREDITS | 5_COINS | 6 CREDITS | |||
| SETTING #26 | | | 1 COIN | 1 CREDIT | | | 1 COIN | 6 CREDITS |
2 COINS 2 CREDITS
3 COINS 3 CREDITS
4 COINS 4 CREDITS
5 COINS 6 CREDITS
SETTING # 27 FREE PLAY FREE PLAY Ss : LE
*° HANDLE: Lisplays ne MAINULE VIX. value. Make sure that tne appropriate V.is. value is as follows:
APPROPRIATE V.R. VALUE: Under 2 DH <— 7D~-83H ~> Over D3H
Left Centering Right
¢ DIP SW: Displays the setting status of DIP SWes on the DRIVE BD
DIP SW SETTING TABLE
The setting of DIP SW Nos. 1~4 on the DRIVE BD allows the handle’s weight (via “feeling”) to be set and ON or OFF of POWER ON CHECK to be selected. DIP SW Nos. 5 to 8 are to be OFF.
The DRIVE BD is mounted on the ASSY ELEC. Refer to 17-1 when changing the settings.
DIP SW SETTING
HANDLE’S WEIGHT
Light ON
OFF ON
ON ON
OFF OFF
ON OFF
ON ON Heavy
POWER ON CHECK
4 FUNCTION
Performed
ON Not Performed
When DIP SW changes are made, be sure to turn the power off and then turn it back on again. The new setting is not effective unless it is turned bach on again.
The handle’s reaction mechanism is subject to a secular change. When the reaction becomes lighter, change the DIP SW setting.
DRIVE BD ERROR DISPLAY
When malfunctioning occurs in the DRIVE BD, testing will not be performed even if DRIVE BD TEST is selected. In this case, the error No. will be displayed by the 7-SEG display on the DRIVE BD.
Also, when a POWER-ON CHECK ERROR occurs, the 7-SEG. display data repeatedly flashes. First check the handle mecha’s V.R., the motor, clutch, etc.
31 Gig
2u-0UZb-UU / 50-8367-00 43-0032-00
43-0145-00 "i oan’ \ ~ a* 2S 50-8120-00 s S 50-8187-00 50-8360-00 /. 50-8143-00 N 43-0978-00" < 50-8361-00 50-8362-00
FOR 50-8070-00 270° Steering wheel with potentiomet
) 1 | 2 | 3 4 | 5 ev | zone ESCRETON con ™ eure
pans 6. BO~ 8495-04 A = INITIAL RELEASE ~ - Lee { 4/6/95
96-0088-00
D 96-0092-00 S0-8406-00 43-0252-00 96-0094-00 96-0084 -00 (Coan
B 50-8299-00 50-8294-00 —oe Hi 96-—0095-00 e4 43-0133-00 4 §0-8414-05 43-0118-00 _ _ Happ ConmRons, inc. Manufacturer of Electron Controls A pee HE SPEED SHIFIER W/TEAR DR KNOB & YELLOW PRINT NEW jaciongy oe DO NOT SCALE DRAWING _[™™" Lee _P* 4/6/95 [R™ ial yee a a ot. © 030'| tas pram we Ine Proven or wee commas we J", [AE FREE |e = F i 408 feat sor Ge pee oe aerneel pA FREE ry B_ae cause ghenmae secon, PS BULL DOT Os MONCOMEEE wo uron Reus | B be 0 - 8495-05
uw)
5 4 ~ INITIAL, RELEASE cer |e or L = [el as
aE Z0—-0038--12 2O » 42-0517-05 YELLOW .25¢ CFITTED AS STANDARD? 42-0405-00 42-0231-00
43-1003-00 91-1319-00 C 42-0391-00 ep 42-0063-00 43-1002-00 as-i009-00-~\, 42-0907-00 ml CLIP = ca 42-0232-00 42-0119-00
42-0350-00 MECH HOLDER 43-1003-00 42-3074-00 (25a PLASTIC MECH FITTED AS STANDARD? 42-0288-00 43-0047-00
B A2-0394-00 — a» FOR LARGE COINS Os Za = a) NOTES: 1> * REJECT BUTTON soLD AS ASSEMBLY ONLY
42-0234-00 BOTTOM DOOR ONLY 42-0249-00 (DOORS & FRAMED Happ Coniros, ine. Manufacturer o! f Electronic Controls
43-0136-00 42-0167-00 lana mae DOOR ASSY., 0/U..25 US PMH NO HARN OR METER 6V LAMP 7 saree PT ase ee Al
road
TOURENCES 4: DO NOT SCALE DRAWING Eran Cod
S 1 PAUL NOT BE REPRODUCED. COMIC! SA OT paint 10. BE RETURNED
42-0209-00 mar te BROPCRTY OF pare COMIN. Teal [2 Fe DNS at) -OO 38-12
- C
\ \. RATING No l | 2 INITIAL RELEASE 20-8060-03 ~ =f = pate 475/95
43-0051-00 43-0124~-00 50-8069 -00 43-0198-00 50-8014-00 43-0198-00 43-0050-00 50-8049-00 50-8170-00 z 43-0983-00 a 43-0269-00 M6 x 30mm. GR 10.9 S0-8159-00 50-8026-00 50-8168-00 50-8372-00 @ 43-0068-00 fo 43-0125-00 QO 43-0041-00 S0-8171-00 43-0246-00 S 50-8169-00 LOCKWASHER M6 HELICAL SPRING
dg ) @.
43-0025-01
~ 50-8373-09 Manufacturer of Electronic Controls — ene UAL PEDAL ASSY SEGA DAYT UPRIGHT We BRAKE PEDALS 1 iS +. un BY rs maT ee lrerere he amas wT DO NOT SCALE DRAWING. |/* LEE 475795 | rai
Lao ‘sea. Nor Be rePmopUcED, comico wos oiscioseo| [3 TO OMERS. PRINT TO 8 RETURNED UPON REQUEST. 2x, 2 01 * 030 Has mem is THE PROPERTY oF HAPP CONTROLS INC. [UE fen FREE Poe Re oP SU-BN60-0
8-10 TGP TEST
TOP TEST Sein! 6000: In this test, TGP (on-screen display related IC) is checked. As shown at the left, if “GOOD” is on displayed for all, it is satisfactory. Press TEST SW or START BUTTON to return to the menu screen.
START : TO EXIT
FIG. 8.10 TGP TEST
8-11 MEMORY TEST
The MEMORY TEST mode is for checking the on-BD memory IC functioning. “GOOD” is displayed for normal ICs and “BAD” is displayed for abnormal ICs.
MEMORY TEST ) 6000 Ic, 7 GOOD Ic, 8 GOOD Ic, 6
| ic. | 9 GOO | IC, 10 GOOD | Ic. 17 GOOD |
IC. 12 GOO IC. 13 GOOD
| ic. 45 GOO | IC. 46 GOOD | IC. 47 GOOD |
| ic. 48 GOoO | Ic. 49 GOOD | Ic. 50 6000 |
Ic. 54 GOO IC. 55 GOOD
START TO EXIT
he
- When the test is completed, if the results are shown as above, it is satisfactory. FIG. 8.11 MEMORY TEST
It takes approximately thirty seconds to complete the test. If the period exceeds thirty seconds, this may have been caused by board malfunctioning.
¢ After finishing the test, pressing the TEST SW or START BUTTON allows the MENU mode to return on to the screen.
35 ————_ . Ez
8-7_ OUTPUT TEST
Choose OUTPUT TEST to cause the following topmost screen to appear. In this test, periodically adjust the monitor and check the status of each lamp.
OUTPUT TEST
| CAT SIZE | CRT COLOR LAMP
| >> EXIT
{
GREEN CURSOR UP RED CURSOR DOWN ‘START TO SELECT
mur RDI
vRé
LEADER
START. TO EXIT
FIG. 8.7 OUTPUT TEST The FIG. at the left shows the menu mode of OUTPUT TEST. Press the SERVICE SW or VR4 (green) /VR1 (red) and bring the arrow (>>) to the desired test item
Press the TEST SW or START BUTTON to cause the test mode screen below to appear. To return back to the menu mode, bring the arrow to EXIT and press the TEST SW or START BUTTON (FIG. 8.2)
Choose CRT SIZE to cause the screen shown at the left to appear.
Adjust the monitor to make sure that the crosshatch lines do not go beyond the screen size and crosshatch distortion does not occur. Press the START BUTTON to retum to the above OUTPUT TEST menu screen.
Choose CRT COLOR to cause the screen shown at the left to appear. This test allows the on-screen color adjustment to be performed. The color of a color bar (for each of the 4 colors, i.e., red, gree, blue, and white) is darkest at the left most end and brightest at the rightmost end. Press the START BUTTON to retum to the above OUTPUT TEST menu screen.
Choose LAMP to cause the screen shown at the left to appear. This enables the status of each lamp to be checked. Causes the START button lamp, the lamp of each V.R. switch, and LEADER lamp to light up in a sequential order. Press the START button to return to the above OUTPUT TEST menu screen.
29 = aS
AME SYSTEM
Selecting the GAME SYSTEM in the menu mode causes the present game setting to be displayed and also the game setting changes can be made. Each item displays the following content.
FIG. 8.4 GAME SYSTEM
° LINK ID:
*¢ CAR NUMBER:
° CABINET:
¢ COUNTRY:
© DIFFICULTY:
ADVERTISE SOUND:
- GAME MODE:
¢ RIVAL ARROW:
SETTING CHANGE PROCEDURE GAME SYSTEM LINK ID MASTER CAR NUMBER 1
CABINET TWIN
COUNRTY EXPORT
DIFFICULTY NORMAL
ADVERTISE SOUND ON GAME MODE NORMAL RIVAL ARROW OFF >> EXIT
GREEN CURSOR UP RED CURSOR DOWN YELOW MODE UP BLUE MODE DOWN START TO SELECT
For communication (interactive) play, set one seat to “MASTER” and the test of the seats to “SLAVE”. The game setting and coin setting, etc. of the MASTER seat apply to the slave seats also. Note that setting changes made by the SLAVE seats are not effective for the game.
For interactive play between 2 or more machines (cabinets), the cabinets (starting from the left, facing the monitor screen) are numbered in the sequential order of No. 1, No. 2, No. 3, No. 4,... . If the same number is used for 2 or more cabinets or cabinets are numbered in an incorrect sequence, on-screen display may be confused.
Setting of cabinet. Set to “TWIN” for this machine.
Message language (select USA for the U.S.A. , and EXPORT for other countries).
The game difficulty is classified into 4 different categories from EASY to HARDEST. Standard setting is “NORMAL”
Advertisement sound during standby. No sound is produced with “OFF”. Standard setting is “OFF”.
Selection of laps. Allows laps to be changed for specific attraction event purposes. NORMAL (8,4 and 2 laps respectively for Beginner, Advanced and Expert.) GRAND PRIX (20, 10 and 5 laps respectively for Beginner, Advanced and Expert). ENDURANCE (80, 40 and 20 laps respectively for Beginner, Advanced and Expert).
Selection of ARROW(s) indicating rival car(s). ON to display. OFF not to display.
® Press the SERVICE SW or VR1 (red), or VR 4 (green) to move the arrow (>>) to the desired item
® Choose the desired setting change item by using any one of VR2 (blue), VR3 (yellow), TEST SW and START BUTTON.
@ To return back to the MENU mode, move the arrow to EXIT and press the TEST SW or START BUTTON.
: rae aS
8-1 SWITCH UNIT
FIG. 8.1 SWITCH UNIT
Open the coin chute door, and the switch unit shown will appear. The functioning of each SW is as follows:
TEST SWITCH:
SERVICE SWITCH:
SOUND VOLUME: For the handling of the test button, refer to the following pages.
Gives credits without registering on the coin meter.
Adjusts the volume of the monitor's right-hand side and left-hand side speakers, the control panel's right/left tweeters and the superwoofer under the seat.
DEMAGNETIZER SWITCH: Eliminates color unevenness from the screen.
The control panel switches are also used in the test mode. For each functioning, refer to the following page and onward. START BUTTON
eee, + HK,
Bh : —VR reg) —VR2 (hive) ER 4 etcen) VR3 (vel lov)
tS
vat
vAz
VR3
vRa
LEADER
START : TO EXIT
- SOUND TEST
SOUND TEST AUTO BCM 1 8CM 2 SEq SE2 VOICE 1 VOICE 2 VOICE 3 NAME RESULT ENGINE >> EXIT GREEN CURSOR UP RED : CURSOR DOWN START TO SELECT In the LAMP TEST mode, carry out the lamp test to ascertain that each lamp lights up satisfactorily.
In the TEST mode, selecting SOUND TEST causes the screen (on which sound related BD and wiring connections are tested) to be displayed.
Be sure to check if the sound is satisfactorily emitted form each speaker and the sound volume is appropriate.
Perform the above inspections also at the time of monthly inspection.
» EE
- PRECAUTIONS CONCERNING INSTALLATION LOCATION
The DAYTONA USA is an indoor game machine. Absolutely do not install it outside. Even indoors, avoid installing in places mentioned below so as to ensure proper usage:
- Places subject to rain or water leakege, or condensation due to humidity:
¢ In the proximity of an indoor swimming poo! and/or shower.
- Places subject to direct sunlight.
° Places subject to heat sources from heating units, etc., or hot air.
¢ Vicinity of highly inflammable/volatile chemicals or hazardous matter.
- Sloped surfaces
® Vicinily of anti-disaster facilities such as fire exits and fire extinguishers
- Places subject to any type of violent impact.
° Dusty places.
INSTALLATION PRECAUTIONS
- Do not insert more than one electrical plug into the power plug socket.
- The per unit standard voltage/amperage is 120V/15A.
- Use of extension cables should be avoided. If you must use, ensure the extension cables are rated at 15A or higher for 120 volt areas
- Note that for transporting the machine into the location’s building, the minimum necessary dimensions of the opening (of doors, etc.) are 36 in (W) and 80 in (H).
5)
f :
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
AUVNUAT Had tu "40M
aust oy ~ m sm = uw oo MIM tnt thnent moe uw _ NIM NIV @-1300W G8 H3L1I
4 €890-6e8 NIML VNOLAVG G8 JINVS 1S901-€€8
VNOLAVO
aad O/|
o Om] OF | PO OW 2am] wes glelem
*—O aE we V O/I VNOLAVG G@ Y3L 14 2590-6€8 GESOL-Z2EB iv iii