CATHODE RAY TOMES

Daytona 2 USA Battle on the Edge (Standard) Owners Manual 1st Printing (999-0705)

Daytona USA 2: Battle on the Edge (Revision A) (Sega, 1998) · Owner's Manual · 106 pages · 105 sections · original scan

Page 1

1st PRINTING JUNE 98

STD VERSION

OWNER’S MANUAL

SEGA ENTERPRISES, USA

MANUAL NO. 999-0705

Page 2

Warranty

‘Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.

Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor,

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages,

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of ail other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above. i t

Page 3

SPECIFICATIONS

Installation space: 68 in.{L) x 45 in. (wW)

Height: 75 in.

Weight: Approx. 570 lbs.

Power maximum current: 7.7 Amp AC 120V 60 Hz

MONITOR: 29" NANAO MONITOR

INTRODUCTION OF THE OWNERS MANUAL

SEGA ENTERPRISES, LTD., has for more than 30 years been supplying various innovative and popular amusement products to the world market. This Owners Manual is intended to provide detailed descriptions together with all the necessary installation, game settings and parts ordering information related to the DAYTONA 2 STD VERSION, a new SEGA product.

This manual is intended for those who have knowledge of electricity and technical expertise, especially in ICs, CRTs, microprocessors, and circuit boards. Read this manual carefully to acquire sufficient knowledge before working on the machine. Should there be a malfunction, non-technical personnel should under no circumstances touch the interior system. Should the need arise, contact our main office, or the closest branch office listed below.

SEGA ENTERPRISES, INC. (USA) Customer Service 45133 Industrial Drive Fremont, CA 94538 Phone 650-802-1750 Fax 650-802-1754 7:30 am - 4:00 pm, Pacific Standard Time Monday thru Friday

Page 4

General Precautions

Follow Instructions: All operating and use instructions should be followed. Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use anly mounting accessories recommended by the manufacturer. Moving the Product: This product should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product to overtum. Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating; these openings must not be blocked or covered. ‘The openings should never be blocked by placing the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your local power company, For products intended to operate from battery power or other sources, refer to the operating instructions. Grounding or Polarization: This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. ‘This is a safety feature, If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-lype plug. Power Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

  • If the power cord or plug is damaged;
  • If liquid has been spilled, or objects have fallen into the product;
  • If the product has been exposed to rain or water;
  • If the product does not operate normally when following the operating instructions. Adjust only those controls that are explained in the operating instructions. An improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation;
  • If the product has been dropped or damaged in any way;
  • When the product exhibits a distinct change in performance; this indicates a need for service. Replacement Parts: When replacement parts are required, be sure the service technician has used replacements parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Page 5

Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Lithium Battery- Dispose of batteries only in accordance with the battery manufacturer's recommendations. Do not dispose in an open flame condition, since the battery may explode. Cleaning: When cleaning the monitor glass, use water or glass cleaner and a soft cloth. Do not apply chemicals such as benzine, thinner, etc. Location: This an indoor game machine, DO NOT install it outside. To ensure proper usage, avoid installing indoors in the places mentioned below:

  • Places subject to rain/water leakage, or condensation due to humidity;
  • In close proximity to a potential wet area;
  • Locations receiving direct sunlight; + Places close to heating units or hot air; eIn the vicinity of highly inflammable/volatile chemicals or hazardous matter;
  • On sloped surfaces; + In the vicinity of emergency response facilities such as fire exits and fire extinguishers; Places subject to any type of violent impact; « Dusty places.

INSTALLATION PRECAUTIONS « Verify the amperage of the branch circuit outlet before plugging in the power plug. Do not overload the circuit. « Avoid using an extension cord. If one is required, use an extension cord of type SJT, ‘16/3 AWG rated min. 120 VAC, 7A,

  • Moving this unit requires a minimum clearance (of doors, etc.) of 32” (W) by 77" (H). « For the operation of this machine, secure a minimum area of 32” (W) by 42"(D).

REGULATORY APPROVALS This game has been tested and found to comply with the Federal Communications Commission Rules, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This game has been tested and listed by Underwriters Laboratories, Inc., to ANSI/UL22,

LISTED

AMUSEMENT MACHINE

Page 6
  • PRECAUTIONS TO BE HEEDED FOR OPERATION

In order to prevent accidents, be sure to comply with the folowing points before and during operation.

PRECAUTIONS TO BE HEEDED FOR OPERATION BEFORE STARTING THE OPERATION

@ In order to avoid accidents, check the following before starting the operation: Check if all of the adjusters are in contact with the surface. If they are not, the cabinet can move and cause an accident.

WARNING!

Ensure that all of the Adjusters are in contact with the floor.

@ Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step. To avoid electric shock, check to see if door & cover parts are closed.

To avoid electric shock, short circuit and or parts damage, do not put the following items on or in the periphery of the product:

Flower vases, flower pots, cups, water tanks, cosmetics, and receptacles/ containers/vessels containing chemicals and water.

To avoid injury, be sure to provide sufficient space by considering the potentially crowded situation at the installation location. Insufficient installation space can cause the player to come into contact with or hit others

CAUTION! and result in injury or trouble,
Page 7

[ PRECAUTIONS TO BE HEEDED DURING OPERATION |

CAUTION!

aN

CAUTION! To avoid injury and accidents, those who fail under the following catagories are not allowed to play the game:
  • Intoxicated persons
  • Those who have high blood pressure or heart problems.
  • Those who have experienced muscle convulsion or loss of consciousness when playing video games, etc.
  • Persons susceptible to motion sickness.
  • Persons whose acts runs counter to the products warning displays.
  • Instruct those who wear high-heeled shoes to refrain from playing the game by explaining that playing the game with highheeled shoes is very dangerous and likely to cause a potentially hazardous situation.

To avoid electric shock and short circuit, do not allow customers to put hands and fingers or extraneous matter in openings of the product or small openings in or around doors. To avoid electric shock and short circuit, do not allow the customers to unplug the power plug without a justifiable reason. Although this product has the accident preventive covering attached to potentially hazardous places where hand and fingers could be caught, small children are unable to perceive hazards. Use care so that small children do not come close to the product when in play. Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage and/or falling down, resulting in injury due to fragments and falling down.

Page 8

2.NAME OF PARTS

29 INCH MONITOR

1P SIDE COCKPIT

GAME SPECIFICATIONS WIDTH in, LENGTH in. HEIGHT in, WEIGHT Ibs.

Weight-DURING SHIPPINGAll measurements are and rounded UP~ 680 LBS.
BILLBOARD32”x8s"x12s"24 LBS.
COCKPIT(each):33”x66”x61”513 LBS.'
COIN CHUTE TOWER12,5”xX21"x23"33 LBS.
WHEN ASSEMBLED4s"x68”x45"570 LBS.
Page 9

TABLE OF CONTENTS

INTRODUCTION OF THE OWNERS MANUAL GENERAL PRECAUTIONS PRECAUTIONS TO BE HEEDED FOR OPERATION . NAME OF PARTS . ACCESSORIES . ASSEMBLY AND INSTALLATION PRECAUTIONS TO BE HEEDED WHEN MOVING MACHINE CONTENTS OF GAME EXPLANATION OF TEST AND DATA DISPLAY 7-1 SWITCH UNIT AND COIN METER 7-2 TEST MODE 7-3 MEMORY TEST 4 BOUNDRY SCAN TEST 5 INPUT TEST 6 OUTPUT TEST 7 SOUND TEST 8 C.R.T. TEST 9 DRIVE BOARD TEST

i maVsyye

0 GAME ASSIGNMENTS -11 COIN ASSIGNMENTS -12 BOOKKEEPING -13 BACKUP DATA CLEAR 7-14 TIME ADJUST

  • HANDLE MECHA 8-1 REMOVING THE CONTROL PANEL 8-2 REPLACING AND ADJUSTING THE HANDLE’S VR 8-3 GREASING 9, SHIFT LEVER 9-1 REMOVING THE SHIFT LEVER 9-2. SWITCH REPLACEMENT
  • ACCEL & BRAKE 10-1 ADJUSTING AND REPLACING THE VR 10-2 GREASING TO FOOT BRAKE AND ACCEL
  • COIN SELECTOR
  • MONITOR
  • REPLACEMENT OF FLUORESCENT LAMP 13-1 REPLACEMENT OF FLUORESCENT LAMP
  • PERIODIC INSPECTION TABLE
  • TROUBLESHOOTING
  • GAME BOARD 16-1 REMOVING THE GAME BOARD 16-2 REPLACMENT OF FUSE 16-3 COMPOSITION OF THE GAME BOARD 16-4 ERROR DISPLAY
  • COMMUNICATION PLAY 17-1 INSTALLATION PRECAUTIONS 17-2, CONNECTING THE COMMUNICATION CABLES 17-3. SETTING FOR COMMUNICATION PLAY
  • DESIGN RELATED PARTS 19, PARTS LIST
  • WIRING DIAGRAMS 2-3 4-5

7-8 9~16

18~20 21~35

23~24

28~29

31~33

39~40

41~42

43~45 46~48

52~56

54~56 57-60

57~58

61~62 63~93

Page 10

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 11
  • ACCESSORIES
DESCRIPTIONORNERS MANUALTe STEley
Part No.(Qty.)999-0705220-5576 (2)(2)
Note..For opening/closingFor the CASHBOX DOOR

the doors Figures

If Part No. has no description, the Number has not been 08 osead) Of sec0)

registered or can not be registered. Such a part may not be obtainable even if the customer desires to purchase it, Therefore, ensure that the part is in safekeeping with you.

ASSY FIBER CABLE FUSE 7A 120 TAMPERPROOF WRENCH

FUSE7Aase(2)we§40-0009-01(1)600-6275-0500 (2)

TOOL For communications play

al

Page 12

THE SHIPMENT METHOD DESCRIBED BELOW ONLY APPLIES TO ‘MODEL 3’ BOARDS CONTAINED IN THE ana FOLLOWING GAMES:

LOST WORLD, VIRTUA FIGHTER 3, SUPER GT, SEGA BASS FISHING, STRIKER 2 HARLEY DAVIDSON, RALLY 2, DAYTONA 2

!NNEVER SHIP MODEL 3 GAME BOARDS

OUTSIDE OF CAGE!!

CARTON BOX 601-8928 (1) Used for transporting the GAME BOARD. {SUPPLIED WITH YOUR GAME}

DO NOT SHIP GAME BOARD WITHOUT THIS BOX AS IT MAY DAMAGE THE GAME BOARD AND VOID YOUR WARRANTY.

“CHECK SIDE” Displa:

FILTER BOARD

NO OTHER GAMES BOARDS ARE TO BE SHIPPED IN THE CAGE AS THEY MAY BE DAMAGED BEYOND REPAIR. PLEASE SHIP THEM

WARNING! WITHOUT CAGE PROPERLY PROTECTED DURING SHIPPING.
Page 13
  • ASSEMBLING AND INSTALLATION

Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling may cause damage to the

CAUTION! machine, or malfunctioning to occur. When assembling, be sure to perform work by plural persons. Depending on the assembly work, there are some cases in which performing the work by a single person can cause personal injury or parts damage. :

When carrying out the assembly work, follow the procedure in the following 5-item sequence:

ASSY OF THE REAR CABI (COCKPIT)

ASSY OF BILLBOARD

SECURING IN PLACE (ADJUSTER ADJ USTMENT)

POWER SUPPLY

ASSEMBLING CHECK

Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width across flats are required for the assembly work.

[1 | ASSY OF REAR CABI (COCKPIT)

Permanantly tightening the hex bolts should

CAUTION! || Not be completed until the leg levelers are adjusted properly.

_ POWER CORD

Page 14

® Install the coin chute tower on the Right-hand side of cabinet. Open the coin chute door and the cashbox door to secure with the 4 hexagon bolts from inside the doors, Please note that the Coin Chute tower is NOT mounted

\ COIN CUIUTE TOWER

FLAT WASHER HEXAGQN BOLT {4} M&xX20

Page 15

ASSY OF THE BILLBOARD

0 Due to its large size, it is very difficult for one person alone to install the billboard, Make sure 2 or more persons are available to perform this work, Attempting to Wi cl perform the installation alone can cause an accident.

® Mount Billboard on cabinet by ensuring the front lip of the Billboard is securely placed under the mounting bracket already installed on the cabinet. Fasten with the 3 hexagon bolls.

© Connect all of the 4 connectors inside the Billboard box (This needs to be done prior to final installation of

Billboard Assy).

v vmanaste/”

il

Page 16

[3] SECURING IN PLACE (ADJUSTER ADJ USTMENT)

A

WARNING! Be sure to have all the Adjusters make contact with the surface. Unless the Adjusters come into contact with the surface, the Cabinet can move of itself, causing an accident.

This machine has 4 each of casters and adjusters (shown below). When the installation Position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level,

Leg Leveler

@ Move the machine to the installation position,

Q) By using a wrench, make adjustnents in the

height of the leg adjusters to ensure that the machine's position is level.

@ After making adjustments, fasten the leg

adjuster nut upward and secure the height of the leg adjuster,

@ Tighten the 4 screws which secure the cockpits

to the Coin Tower,

approx. 5mm

\ Leg Adjuster

Page 17

POWER SUPPLY

@ Ensure that the power cord is not exposed on the surface (passage, etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the cord can cause an electric shock or short circuit. @ Ensure that the wiring position is not in the customer's passage way

WARNING! or the wiring has protective covering.

Connect the game to the power supply and tum on power to the game. Before connecting power supply be sure that power switch is off

Turning the AC unit’s main switch on will cause the machine to start the power check and network check automatically. In the Power On check, the steering wheel tums left and right, and then retums to the centering position and stops. In this check, the values of the VR inside the control panel are corrected. Until this check is finished, and the steering wheel stops, do not touch the steering wheel or play the game. If you do, the steering reaction during the game (reaction at the time of course-out or crash) can not be obtained correctly. In the case of an abnormal reaction during the game, tum power on again from the beginning and complete the power on check. During Network checking, “NETWORK CHECKING” flashes on the screen. When network checking is finished, the demo mode will appear on the monitor screen. After 10 seconds, if the network check is not finished, check the communications connections. To the Power Supply Socket outlet

Page 18

ASSEMBLING CHECK

The TEST MENU allows for each part of the cabinet to be checked, the Monitor to be adjusted, and the coin and

game related various functions to be performed,

Selecting the MEMORY TEST on the test mode menu screen causes the on-board memory to be tested automatically. The game board is satisfactory if the display beside each IC No. tes shows GOOD. IC. 16 eel IC. 22 IC. 94 o© IC. 19 IC. 20 toy Ics Ica

PRESS TEST BUTTON TO CONTINUE

‘(CPUROM TEST

GOOD (CROMO3 MASK) GOOD (CROMO2 MASK) GOOD (CROMO} MASK) GOOD (CROMO0 MASK)

GOOD (CROMLS MASK)

‘GOOD (CROMI2 MASK) GOOD (CROMII MASK) GOOD (CROMIO MASK) ‘GOOD (CROM23 MASK) ‘GGOD (CROM22 MASK) ‘GOOD (CROM21 MASK) ‘GOOD (CROM20 MASK) GOOD (CROM33 MASK) GOOD (CROM32 MASK) ‘GOOD (CROMB1 MASK), ‘GOOD (CROMB0 MASK) GOOD (CROMS MASK) GOOD (CROM2 MASK) IC.

GOOD (CROMI MASK) XXXX

GOOD (CROMO MASK) PRESS TEST BUTTON TO CONTINUE

VIDEO BOARD RAM TEST

Page 19

VIDEO BOARD ROM TEST

(vROMOL) «VROM00) (ROMO3) aA SSSIRRESSE SSR

PRESS TEST BUTTON 10 EXIT

Selecting the INPUT TEST on the menu screen in the test mode to display the screen on which each SW and Volume is tested. Press each switch. (To check the Coin SW, insert a Coin from the inlet with the Coin Chute Door being opened.) If the display beside each switch is ON, the switch and wiring connection are satisfactory. Check the display of each Volume value. The Volume could have an irregularity caused by differences between machines and vibration during transportation. Set the Volume values by referring to Section ?

PRESS SERVICE*TEST BUTTON TO EXIT

In the output test mode, carry out lamp test to ascertain that each lamp lights up satisfactorily.

PRESS TEST SUTTON TO EXIT

Perform the above inspections also at the time of monthly inspection,

Page 20

VIDEO BAORD ROM TEST In the TEST mode, selecting SOUND TEST causes the screen, on which sound related BD and wiring connections are tested, to be displayed. be sure to check if the sound is satisfactorily emitted from each of speaker and the sound volume is appropriate. R

SRARAGBS SRREoSeEsES Ic, Ic.38 Ic.39 Ic.40

In the TEST mode menu, selecting C.R.T. TEST allows the screen (on which the projector is tested) to be displayed. Although the projector adjustments have been made at the Y jj Yy V/ same time of shipment from the factory, cotor deviation, Use etc,, May occur due to the effect caused by geomagnitism, UL YH the location building's steel frames and other game ma-

Wl chines in the periphery. By watching the test mode screen,

F make judgement as to whether an adjustment is needed. IE it itll is neccessary, adjust the projector by refering to Section 9.

pom

PRESS TEST BUTTON TO CONTINUE

Perform the above inspections also at the time of monthly inspection.

Page 21
  • PRECATIONS TO BE HEEDED WHEN MOVING THE MACHINE

@ When moving the machine, be sure to pull out the plug from the power supply. Moving the machine with the plug as is

WARNING! inserted can damage the power cord and cause a fire or electric shock. @ When moving the machine on the floor, retract the Adjusters and ensure that Casters make contact with the floor. During transportation, pay careful attention so that Casters do not tread power cords. Damaging the power cords can cause an electric shock and/or short circuit. @ When lifting the cabinet, be sure to hold the catch portions or bottom part. Lifting the cabinet by holding other portions can damage parts and installation portions, due to the empty weight of the cabinet, and cause personal injury.

Use care when handling glass made parts. When the glass is damaged, fragments of glass can cause injury

CAUTION!

Do net push the cabinet from the left/right direction.

Page 22
  • CONTENTS OF GAME

The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves : different from the following contents, some sort of faults may have occured. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation. During the Advertise mode, the Billboard’s Decoration Lamp lights up periodically, When the machine is energized, the Billboard’s Fluorescent Lamp is always lit. ‘The Steering Wheel repeats centering action periodically. Automatic centering will apply to the Steering Wheel if it is not centered. During the Advertise Mode, sound is emitted from the Speaker beside the Monitor.

HOW TO PLAY

@ Get in the Cockpit. The seat can be adjusted in forward and rearward positions. The Lever is located on the lower right (facing the screen) of the Seat. Pull this Lever to make adjustments.

@ Insert a coin(s). Number of coins is displayed on the lower left of the screen. Inserting one play worth of coin(s) causes the SELECT screen to be displayed. Up to 9 credits can be counted at one time, Coins inserted after counting 9 credits will niether be counted nor returned. Credits will not be displayed in the SELECT mode and during the game play (credits are displayed only during ADVERTISE).

® When a coin is insterted to one of the machines linked for communication, the other unit’s screen will be in the entry accepting mode, and countdown starts. For Entry, the player is to insert a coin(s) during countdown,

® Select sequentially in order of COURSE, CAR, and TRANSMISSION. Turn the Steering Wheel to choose and decide ( the selection by stepping on the Accelerator Pedal,

Page 23

Displaying the SELECT mode starts countdown. When the countdown becomes 0, the COURSE and CAR being chosen are determined automatically. Stepping on the Accel. Pedal again after stepping on it once will have the present SELECT screen, in the middle of counting down, proceed to the next SELECT screen Course selection is decided by majority. In case of a tie, the left-hand side course on the SELECT screen has priority.

COURSE SELECT 15

SELECT ey NORMAL |

© Choosing and deciding on either Automatic or Manual (4 shifts) will result in a race start. At this time, while pressing the Start Button, step on the Accel. Pedal to decide on the selection to play in the PLAYER ONLY mode. After race start, the View Change Button being selected lights up. While participating in the race, if the player becomes the leader, that particular seat's Leader Lamp flashes. The Steering Wheel is subject to the reaction and load depending on the status of the Course, Course Out and Crash,

© ‘The number of Laps is displayed on the upperleft of the screen, and Lap time is shown below the upper left. Tachometer and Time Limit (remaining time) as well as Speed are shown on the upper center portions. Position, Condition and Course Map are displayed sequentially in order from the upper right portion of the screen downward, If Manual Transmission is selected, Gear Position will be shown to the right side of speed.

@ Simultaneously with race start, the Time Limit decreases. Passing a Course’s Check Point allows the game to be continued with the remaining time of the previous section added to the Time Limit up to the next Check Point. Failing to pass the Check Point within the Time Limit results in GAME OVER.

Page 24

When the race participants’ leader finishes the specified number of laps of each course, the game is over then. The game is over also when all of the race participants fail to pass the checkpoint within the time limit.

@ After one game is finished, if credits allowing for play still remain, the SELECT mode appears on the screen.

@ Excellent players can enter their name. Select name characters by turning the Steering Wheel clockwise or counterclockwise and decide by stepping on the Accel. Pedal.

Page 25
  • EXPLANATION OF TEST AND DATA DISPLAY

By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable.

CAUTIONS TO BE HEEDED WHEN USING THE TEST MODE: tn the case where plural machines are linked for communication play, if even one seat enters the test mode, all of the linked seats will enter the test mode. Therefore, if any one of the linked machines is in play, use care so as not to use the test mode, The contents of the setting changes made will not be effective unless the test mode is finished in the test mode. When the setting is changed, be sure to “EXIT” in the menu mode. Do not press the TEST BUTTON during network check at the time of turning the power on or exiting from the test mode. If anyone of the linked machines uses the test mode during network check, all other Seats will continue network checking. Cause all of the Seats to reenter the test mode and then have all of the Seats exit from the test mode simultaneously.

TABLE 7 EXPLANATION OF TEST MODE

DESCRIPTION SECTIONS

When the machine is installed, perform the following: INSTALLATION | 1. Check to see that each setting is as per standard setting made OF MACHINE at the time of shipment.

  • In the INPUT TEST mode, check each SW and VR.
  • In the OUTPUT TEST mode, check each of lamps. 4, In the MEMORY TEST mode, check ICs on the IC Board.

Choose MEMORY TEST in the MENU mode to allow the MEMORY test to be performed. In this test, PROGRAM RAMs, ROMs, and ICs on the IC Board are checked.

PERIODIC Periodically perform the following:

SERVICING 1, MEMORY TEST :

  • Ascertain each setting.
  • In the INPUT TEST mode, test the CONTROL device 4, In the OUTPUT TEST mode, check each of lamps.

CONTROL 1. In the INPUT TEST mode, check cach SW and VR. SYSTEM 2. Adjust or replace each SW and VR.

  • If the problem can not be solved yet, check the CONTROL’s moves,

MONITOR In the MONITOR ADJUSTMENT mode, check to see if the MONITOR adjustment is appropriately made.

IC BOARD 1, MEMORY TEST

  • In the SOUND TEST mode, check the sound related ROMs.

DATA CHECK _ | Check such data as game play time and histogram to adjust the difficulty level, etc

Page 26

7-1 SWITCH UNIT AND COIN METER

Never touch places other than those specified. Touching places not specified can cause electric shock and short circuit.

WARNING!

@ Adjust to the optimum sound volume by considering the environmental requirements of the installation location. @ If the COIN METER and the game board are electrically disconnected,

IMPORTANT! game play is not possible.

Open COIN CHUTE DOOR, and the switch unit shown appears. The function of each switch is as follows:

SWITCH UNIT

@)_ SOUND VOLUME Controls the speaker volume of the right/left speakers.

TEST BUTTON (TEST SW)

  • Forthe handling of the TEST BUTTON, tefer to the section on test mode.

SERVICE BUTTON (SERVICE SW)

@) Gives credits without registering on the coin

meter.

SQUN)_ VOLUME, SERVICE BUTTON — DEMAGNETIZER SKITCH i

SWITCHES FOR THE

LEFT PLA' TEST ERVICE GEMAGNETIZING) Sw SW sw RIGHT aN O © SWITCHES FOR THE RIGHT SIDE PLAYER

Page 27

7-2 TEST MODE This mainly checks if the operation of the game BD is accurate, and allows for COIN ASSIGNMENTS/GAME ASSIGNMENTS setting and Projector adjustments.

The Following FIGURES/TABLES show the factory recommended settings.

(@ Push the TEST BUTTON to cause the following TEST MENU to appear:

@ By pushing the SERVICE BUTTON, bring the “>” mark to the desired item and press the TEST BUTTON. This will select the item’s test. The View Change button #3 (yellow)

saiplaetienaacas instead of the test button can be used, and View

>ExIt Change buttons 1 (red) & 2 (blue) instead of service button (for moving arrow) can be used.

SELECT WITH SERVICE BUTTON @ After the test is complete, move the “>” mark

‘AND PRESS TEST BUTTON

HG. 72 TEST MENU to “EXIT” and press the TEST BUTTON to return to game mode.

7-3 MEMORY TEST The MEMORY TEST mode is for checking the on-BD memeory IC functioning. “GOOD” is displayed for normal ICs and “BAD” ae is displayed for abnormal ICs Ios $0.15 {0.16 ic. Ic.22 rare |e Ge @ = When the test is completed, if the results are shown left, it is satisfactory. @ During the test, TESTING NOW is displayed on the lower part of the screen. After an elapse of 5 minutes, if the test is not finished, the IC Board may be malfunctioning. Upon finishing the test,

PRESS TEST BUTTON TO CONTINUE press the Test Button to proceed to “CPU ROM

FIG. 7.3a MEMORY TEST TEST”. (SCROLL SRAM) 1e.7 Ic.

Page 28

@ During the test, the TESTING NOW message is displayed on the lower part of the screen. Upon finishing the test, if the left is displayed it is satisfactory. After finishing the test, press the Test Button to proceed to “VIDEO RAM TEST”. (CPUROMTEST

GOOD (CROMO3 MASK) GOOD (CROMO2 MASK) ‘GOOD (ROMO! MASK) ‘GOOD (CROMO00 MASK) GOOD (CROM13 MASK) GOOD (CROMI2 MASK) GOOD (CROMII MASK) GOOD (CROMIO MASK} GOOD (CROM23 MASK} GOOD (CROM22 MASK} GOOD (CROM21 MASK) GOOD (CROM20 MASK) GOOD (CROM33 MASK) GOOD (CROMB2 MASK) GOOD (CROM31 MASK) GOOD (CROM30 MASK) GOOD (CROM3 MASK) 7 GOOD (CROM2 MASK) IC. I8 GOOD (CROMI MASK) IC. 19 GOOD (CROMOMASK) IC. 20 eieiesn eieer era cerntnay

PRESS TEST BUTTON T0 CONTINUE

FIG. 7.3b MEMORY TEST

VIDEO BOARD RAM TEST @ During the test, the TESTING NOW message is displayed on the lower part of the screen. Upon finishing the test, if there is no irregularity, nothing will be displayed. After finishing the test, press the Test Button to proceed to “VIDEO BOARD ROM TEST”.

PRESS TEST BUTTON TO CONTINUE

FIG. 7.3¢c MEMORY TEST

VIDEO BOARD ROM TEST @ During the test, the TESTING NOW message is

GOOD:(YROMOL)10.26.
GOOD(ROMO) 1C. 77displayed on the lower part of the screen. After
Goon(WROMO2)E33finishing the test, if the left is displayed, it is
GOOD(YROMOS)IC.30.
GOOD(VROMO4)16.31satisfactory.
coopROMO)IeAfter finishing the test, press the Test Button to
cOOD(WROMII)IC. 34
Good(WROMIO)Ic.35retunr to the Menu Screen.
Goon(vROMI3).1.36
Goon(VROMI2)1.37

GOOD = (VROMIS) IC. 38

GOOD(VROMI4)IC. 39
GOOD(YROMI7)IC.40

GOOD (VROMIG)1C.41

PRESS TEST BUTTON TO EXIT

FIG. 7.3d MEMORY TEST

Page 29

7-4 BOUNDRY SCAN TEST

power off and turn it back on again. By doing so, the Board intialization is per-

S Upon finishing the test, cause the Test Menu to return on the screen, turn the

formed to avoid malfunctioning

IMPORTANT!

Selecting “BOUNDRY SCAN TEST” causes the Game Board's testing in terms in terms of hardware to be performed

  • automatically.

Saneysearreer @ = When the test is completed, if the results are

shown left, it is satisfactory.

@ After finishing the test, press the Test button to have the Menu Mode return on the screen. Next, turn the power off and then turn it back on again. By so doing, the Board intialization is performed to avoid malfunctioning.

@ = If there is any hardware problems, error message is displayed. Please contact the offices herein stated or where the product was purchased from.

FIG. 7.4 BOUNDRY SCAN TEST

Page 30

7-5 INPUT TEST Select INPUT TEST to have the screen shown below appear and to observe the status of each switch and the value of each V.R. on the Control Panel. Periodically check the status of cach switch and V.R. on this screen.

@ By pressing each switch, if the display on the right-hand side of the name of each switch changes to ON from OFF, the SW and the wiring connections are satisfactory.

@ To check CHUTE 1 & CHUTE 2 coin switches, open the

COIN CHUTE DOOR and insert a coin(s) in the slot.

@ Press either the TEST BUTTON or the START BUTTON + VIEW CHANGE BUTTON to return to the test menu.

@ GEAR POSITION indicates which shift and SHIFT LEVER is in. “N" means neutral.

PRESS SERVICEsTEST BUTTON TO EXIT

FIG. 7.5 INPUT TEST

SHIFT 1

7-6 OUTPUT TEST

Choose OUTPUT TEST to cause the following lower screen lo appear. In this test, check the status of each lamp.

@ Pressing the TEST BUTTON causes “ON” to be displayed and the corresponding lamp lights up. Pressing the TEST BUTTON again causes “OFF” to be displayed and the lamp goes off.

@ Press the Test Button to return to the MENU MODE. PRESS TEST BUTTON TO EXIT FIG. 7.6 OUTPUT TEST

Page 31

7-7 SOUND TEST

SE (auTo)

SB (MANUAL)

ENGINE, MUSIC (MPEG BOARD) MUSIC VOLUME

EXIT

‘SELECT WITH SERVICE BUTTON, PRESS TEST BUTTON TO BX

FIG. 7.7a SOUND TEST

SOUND TEST -MUSIC VOLUME CONTROL-

MUSIC VOLUME (ADVERTIS2) MUSIC VOLUME (OTHER)

SELECT WITH SERVICE BUTTON

PRESS TEST BUTTON To EXIT

FIG. 7.7b SOUND TEST.

SELECT WITH SERVICE BUTTON:

PRESS TEST BUTTON TO EXIT

FIG. 7.7¢ SOUND TEST This test mode allows each sound related board and speaker to be checked.

Press the Service Button to select the sound to be tested, and press the Test Button to have the selected Sound ‘Test screen appear.

Select EXIT and press the ‘Test Button to return to the ‘Test Menu.

The volume of the Background Music (sound from MPEG Board) is adjusted. The music volume emitted during the Advertise mode and Game mode can be adjusted.

Press the Service Button to select the sound test to be set, The sound volume can be varied by pressing the ‘Test Button.

Choose EXIT and press the Test Button to return to the Sound Test Menu. Normally, set to MAX and adjust the sound volume with the Volume on the Switch Unit.

Press the Service Button to select the sound to be tested, and press the Start Button to have sound emitted.

Selecting SE (AUTO) allows sound to be emitted automatically.

Press the Test Button to have Sound Test Menu return on the screen,

Page 32

7-8 C.R.T. TEST

PRESS TEST BUTTON TO CONTINUE

FIG. 7.8 C.R.T. TEST

7-9 DRIVE BOARD TEST

‘STOP MOTOR ROLL RIGHT ROLL LEFT SET CENTER OF STEER 8011 (80H)

>ExIT

SELECT WITH SERVICE BUTTON

PRESS TEST BUTTON TO EXIT

FIG. 7.9 DRIVE BOARD TEST Select C.R.T. TEST to cause the MONITOR to display the screen shown left, allowing MONITOR adjustment status to be checked.

Periodically check the MONITOR adjustment status on this screen,

‘The screen (1/2) enables color adjustment check to be performed. The color bar of each of the 4 colors, ie.,red, green, blue, and white, is the darkest at the extreme left and becomes brighter towards the extreme right.

Press the TEST BUTTON to shift to the next screen (2/2).

The screen (2/2) allows screen size and distortion to be tested.

Check if the CROSSHATCH FRAME LINE goes out of the screen and if the crosshatch lines are distorted.

Press the TEST BUTTON to retum to the MENU mode.

Select DRIVE BOARD TEST to have the following screen displayed. This test allows the movement of motor, etc., to be checked and Steering Wheel Volume setting to be performed.

Press the Service Button to select each item and press the Test Button to cause the selected item's movements to be performed. @ STOP MoTOR: Stops the load subjected to the Stering Wheel and the movements of the Motor for reaction. As such, initially selecting this item and pressing the Test Button make no difference superficially. Select ROLL RIGHT or ROLL, LEFT below this item, and in the status that the motor is functioning in a certain direction, select the item and press the Test Button to stop the movements in that particular direction.

@ ROLLRIGHT: ‘The motor moves so as to tum the Steering Wheel clockwise.

@ ROLLLEFT: ‘The mator moves so as to turn the Stecring Wheel counter clockwise,

Page 33

SETTING THE VOLUME

Performs the setting of VOLUME which detects the movements of Stcering Wheel as per DRIVE BOARD TEST on Previous page. WHen the Steering Wheel Volume is adjusted or teplaced, perform Volume Setting in the following procedure,

SETTING THE STEERING WHEEL VOLUME

\ee LEVEL LINE

With the Steering Wheel in the cenetering position, press the Test Buttoa,

Page 34

7-10 GAME ASSIGNMENTS Selecting the GAME ASSIGNMENTS in the MENU mode causes the present game settings to be displayed and also the game settings changes (game difficulty, etc.) can be made. Each item displays the following content.

SETTING CHANGE PROCEDURE

@ Press the SERVICE BUTTON to move the “>” to the desired item. (Choose the desired setting change item by using the TEST BUTTON. Q@) To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.

@ COUNTRY GAME ASSIGNMENTS The Country setting cannot be selected @ LINKD

COUNTRY For communication play, set one seat to “MASTER” and the

a RUMBER rest of the seats to “SLAVE”. The game setting and coin

CABINET TYPE, selting, etc. of the MASTER seat apply to the SLAVE seats DIFFICULTY also. For non-interactive play set to “SINGLE”. one @ CAR NUMBER GAME MODE For interactive play between 2 or more machines (cabinets), BEGINNER the cabinets (starting from left, facing the monitor screen) are ADVANCED numbered in sequential order ofNo.1j No.2} No. 3, No. 4,...If MOTOR POWER faa S the same number is used for 2 or more cabinets, or cabinets are

cane cata NAMELENTEY numbered in an incorrect sequential order, on screen error wer Setting of cabinet. Set to ‘TWIN for this machine

CAMPAIGN SCHEDULE display will appear and in this case, no activation takes place. POINT CLEAR @ CABINET TYPE wer Setting of cabinet. Set to ‘TWIN for this machine. ‘SFLECT WITH SERVICE BUTTON @ =DIFFICULTY [AND PRESS TEST BUTTON TO EXIT Sets the difficulty level in 4 categories, i.c., EASY, NORMAL} HARD, and HARDEST. @ ADVERTISE @ VOCAL Setting of sound during Advertise (ON-ssound to be emitted/ Sets the singer of the music to be played. OFF--sound not to be emitted), @ GAME MODE Sets the number of laps. The lap frequency increases in the sequential order of ‘NORMAL (SPRINT), GRAND PRIX, 100 mile, 200 mile, 300 mile, 400 mile, and 500 mile. XXX mile is used for a special event and in this case, there is no time limit all the way up to Goal. @ MOTOR POWER Sets the steering wheel (reaction motor) strength. When the strength is set to weak, the Cockpit swaying movement will be less. @ RANKING MODE Sets the ranking mode which has two types, i.c., NORMAL and CAMPAIGN. Setting to CAMPAIGN allows points (o be awarded according to the player's results and activities per race, with the name registered at the time of name entry as well as his birthday registered in the Birthday Input Mode as the password to recognize the player's identity. From the next play onward, extra points will be awarded when the name and birthday are inpulled after

game over. @ LOCATION NAME ENTRY Setting the ranking mode to CAMPAIGN allows the Location Name sct in this item to be displayed during advertise, The name can be inputted in 2 lines by using a maximum of 32 characters. Move the arrow with the Sevice Button and select the setting with the Test button. @ CAMPAIGN SCHEDULE Sets the start and end dates of campaign. The period set in this item and Location Name inputted in the LOCATION NAME ENTRY are displayed in the Advertise mode. Before setting in this mode, ensure that the date and time are correct by TIME ADJSUT in the Test mode, Move the arrow with the Service button and select the setting with the Test button. @ = POINTCLEAR Clears (resets) all of the player names and points shown in the RANKING MODE CAMPAIGN.

Page 35

7-11 COIN ASSIGNMENTS

The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as the basic numbers of coins and credits. This mode expresses “how many coins correspond to how many credits.”

Gror) Setting changes cannot be stored unless the TEST BUTTON is pressed

while the arrow is on EXIT.

IMPORTANT!

() Press the SERVICE BUTTON to move the arrow to the desired item.

@) Choose the desired setting change item by using the TEST BUTTON. (@)) To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.

7-11 COIN ASSIGNMENTS

‘COIN ASSIGNMENTS @ = COIN/CREDIT SETTING Sets the CREDITS increase increment per coin insertion. There are 27 setings from #1 to #27, expressed in XX COIN(CREDIE SETTING #3 CREDIT as against XX COINS inserted. (TABLE 7.1 1a, cHuUTPAS —1cOIN 7.11b) #27 refers to FREE PLAY. When the COIN CHUTE TYPE is set to INDIVIDUAL, there are some setting numbers not displayed as indicated in SHTER 1 COIN TABLE 7.11b, ADDITIONAL SETTING eer @ = MANUAL SETTING This allows credit increase setting as against coin insertion , to be further set in the manner finer than COIN/CREDIT SETTING (refer to TABLE 7.11c). >exTT

parerwimieeence sero @ ADDITIONAL SETTING ‘AND PRESS TEST BUTTON, Displayed only when COUNTRY is set to USA, aijd when. GAME MODE is set to NORMAL if the GAME ASSIGN- MENTS, and allows for the setting, Inserting a certain number of coins in addition to the default coin immediately before the game starts allows extra play beyond specified number of laps. The limited number of coins in total for COIN ASSIGNMENTS (ADDITIONAL SETTING) additional credit insertion is 24. Entering the Test Mode or 4 REDS {I ~ 16 CREDITS) turning power off will not reset the credits. ‘2.CREDITS (11 8 CREDTIS) BEGINNER + ERTAPS (4! ~ 416 LAPS) ADVANCED 1 LAP (41 4 +8 LAPS) EXPERT #1 LAP (#1 4 +4 LAPS)

>EXIT

SELECT WITH SERVICE BUTTON

‘SDMESS TT NOTION )

Page 36

TABLE 7.11a COIN/CREDIT SETTING (COIN CHUTE COMMON TYPE)

SETTING

SETTING #151 COIN1 CREDIT

2 COINS 3 CREDITS

SETTING #16£ COIN3 CREDITS
SETTING #173 COINS1 CREDIT
SETTING #191 COIN1 CREDIT

2 COINS 2 CREDITS

4 COINS 5 CREDITS

SETTING #201 COINS CREDITS
SETTING #221 COIN2 CREDITS
SETTING #232 COINS1 CREDIT

4 COINS 2 CREDITS SCOINS 3 CREDITS

SETTING #251 COIN1 CREDIT

2 COINS 2 CREDITS

5 COINS 6 CREDITS

SETTING #261 COIN1 CREDITS
SETTING #184 COINS1 CREDIT

3 COINS 3 CREDITS

SETTING #215S COINS1 CREDIT
SETTING #241 COIN3 CREDITS

3 COINS 3 CREDITS

SETTING #27 FREE PLAY 4 COINS 4 CREDITS

Page 37

Selecting MANUAL SETTING in the COIN ASSIGNMENTS mode displays the following screen.

MANUAL SETTING Loon 1cREDIT

NO BONUS ADDER

(COIN CHUTE #! MULTIPLIER 1 COIN COUNTS AS | COIN con 1 28 cep i 23 COIN CHUTE #2 MULTIELER, 1 COIN COUNTS AS | COIN con 1 2 3 cRepir 1 3

EXIT ‘SBLECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON

FIG. 7.11b MANUAL SETTING

@ Determines Coin/Credit setting. @ This sets how many coins should be inserted to obtain one Service Coin.

@ This sets how many tokens one coin represents.

‘Table 7.11¢ MANUAL SETTING COIN TO CREDIT COIN CREDIT 2 COINS L CREDIT

2 COINS GIVE 1 EXTRA COIN 3 COINS GIVE 1 EXTRA COIN 4 COINS GIVE 1 EXTRA COIN 5 COINS GIVE 1 EXTRA COIN 6 COINS GIVE 1 EXTRA COIN 7 COINS GIVE | EXTRA COIN,

LCOIN COUNTS AS 2 COINS

1 COIN COUNTS AS > COINS 1 COIN COUNTS AS 7 COINS 1LCOIN COUNTS AS 8 COINS 1 COIN COUNTS AS 9 COINS

Page 38

7 - 12 BOOKKEEPING Choosing BOOKKEEPING in the MENU mode displays the data of operating status up to the present are shown on 2 pages. Press the TEST BUTTON to proceed to PAGE 2/2.

BOOKKEEPING CON CHUTE.

COIN CHUTE #2

‘TOTAL COINS CODY CREDITS SERVICE CREDITS ‘TOTAL CREDTTS NUMBER OF GAMES. TOTAL «= TIME PLAY TIME AVERAGE PLAY LONGESTPLAY ‘SHORTEST PLAY

FIG. 7.12a BOOKKEEPING (1/2)

BOOKKEEPING PAGE 22

TIMEHISTOGRAM BEGINNER ADVANCED EXPERT

PRESS TEST BUTTON TO EXIT

FIG. 7.126 BOOKKEEPING (2/2) 7-13 BACKUP DATA CLEAR

BACKUPDATA CLEAR,

‘YES (CLEAR) 2NO (CANCEL)

SELECT WITH SERVICE BUTTON

PRESS TEST BUTTON TO EXIT

FIG. 7.13 BACKUP DATA CLEAR, COIN CHUTE#*: Number of coins put in each Coin Chute.

TOTAL COINS: ‘Total number of activations of Coin Chutes.

COIN CREDITS: Number of credits registered by inserting coins.

SERVICE CREDITS: Credits registered by the SERVICE BUTTON.

TOTAL CREDITS: Total number of credits (COIN CREDITS+SERVICE CREDITS).

@ TOTAL TIVE: The total energized time.

On page (2/2), each play frequency is displayed. When setting difficulty levels, the frequency can be refered to as a standard.

When in the PAGE 2/2 mode, press the TEST BUTTON to. retum to the MENU mode.

Clears the contents of BOOKKEEPING and high score player ranking entry.

When clearing, bring the arrow to “YES” and when not clearing, to “NO”, by using the SERVICE BUTTON, and push the TEST BUTTON,

When the data has been cleared, “COMPLETED” will be displayed. Bring the arrow to “NO” and press the TEST BUTTON to cause the MENU mode to return on to the screen.

Note that the contents of the GAME SETTING, COIN SETTING, and BOARD SETTING are not affected by BACKUP DATA CLEAR operation.
Page 39

7 - 14 TIME ADJUST

This Test Mode allows the date (year/month/day) to be set. When (uming power on, if the clock has incorrect data, or if the voltage from the lithium battery is insufficient, movements will stop in the Pre- Advertise on-screen start-up status, and in this case, appropriate clock input or battery replacement is required. Although pressing the Start Button allows. you to proceed, if the unit being tested is set to MASTER or SINGLE, the RANKING MODE (CAMPAIGN) will compulsorily be changed to RANKING MODE (NORMAL). Perform TIME ADJUST in the following procedure:

Note that SEGA will take care of battery replacment. Please contact where you purchased the product from.

1998, WAI retary

SELECT WITH SERVICE BUTTON

PRESS TEST BUTTON TO EXIT

FIG. 7.14 TIME ADJUST Bring the arrow to the date with the Service Button.

Select the itemto be adjusted by using the Service Button (the item being selected blinks).

Press the Test Button to increase the number and select.

Page 40
  • HANDLE MECHA

@ In order to prevent an electric shock and short circuit, be sure to turn power off before. performing work by touching the interior parts of the product.

WARNING! @ Be careful so as not to damage wirings. Damaged wiring can cause an electric shock ‘ or short circuit accident.

In the test mode, if the steering whee!’s VR variations are not within the allowable range, the VR installation position adjustments or VR replacement is needed. Also, be sure to apply grease to the VR gear portion once every 3 months.

8-1 REMOVING THE CONTROL PANEL

  • Turn the power switch off. ©) Remove a total of 4 tamperproof screws from both sides of the control panel's front. (©) Remove the two tamperproof screws fromthe underside of the control panel. ® Wiring connectors are comected inside the control panel. Carefully draw the control panel in a mnner so as not (o damage wiring. ® Disconnect the wiring connector.

TAMPERPROOF SCREX (black) (6} Bg x 30

Page 41

8 - 2 REPLACING AND ADJUSTING THE HANDLE’S VR

cause electric shock and/or short circuit.

WARNING! @ After the replacement or adjustment of the VR, be sure to set the variable value of . the VR in the test mode’s Volume Setting. A @ Never touch places other than those specified. Touching places not specified can

REPLACING THE VOLUME

@ Tom off the power, @ Disconnect the connector, @ Take out the 2 screws which secure the volume Bracket and remove the Volume Bracket. @ Take out the 2 screws to remove the Volume Gear and replace the Volume. © After replacing the Volume, perform Volume setting in the Volume Setting Mode.

ADJUSTING THE VOLUME

@® In the Test Mode, have the Volume value indicating screen displayed. @ Loosen the 2 screws which secure the Volume Bracket to disengage Gear Mesh. @ With the Steering Wheel in the centering position, cause gears to be engaged in the manner so that the Volume Shaft is in the status shown below. ® Fasten screws which secure the Volume Bracket. ® Perform Yolume setting as per the Volume Setting Mode.

YR_BRACKET VR. 220-5484. 220-5373

SCREW (2 WAX8, w/flat and spring washers

Page 42

8-3 GREASING

cause electric shock and/or short circuit.

WARNING! @ After the replacement or adjustment of the VR, be sure to set the variable value of . the VR in the test mode's Volume Setting. A @ Never touch places other than those specified. Touching places not specified can

Apply greasing to the Votume gear mesh portion every 3 months. For spray greasing, use Grease Mate (Part No. 090-0066).

Page 43
  • SHIFT LEVER

A @ In order to prevent electric shock and short circuit, be sure to turn off the power before performing work on the interior parts of the product.

CAUTION! |] @ Be careful not to damage wiring. Damaged wiring can cause electric shock or short circuit. @ Do not touch places other than those specified. Touching places other than those specified can cause an electric shock or short circuit accident.

If the Shift Lever operation is not satisfactory, remove the Shift Lever in the following procedure and replace the

  • microswitch,

9-1 REMOVING THE SHIFT LEVER

(@) Turn Power off. @) Take off the 4 screws and remove SHIFT COVER A. @ Take out the 4 SPECTAL BOLTS and pull the SHIFT LEVER UNIT upward by paying careful attention so as not 0 damage the wiring. @ Disconnect the 2 connectors to allow the unit to be removed.

SPECIAL BOLT Spring washer used.

Page 44

9-2 SWITCH REPLACEMENT

Each microswitch is secured with 2 screws. Remove the 2 screws and replace the Microswitch.

MICROSWITCH 509-5636

SCREW (2) M2.3 12, flat & spring washers

After replacing the Switch, check to sce if the switch is inputted as per ShifC1ever operation in the Test Mode.

40)

Page 45
  • ACCEL & BRAKE(S)

before performing work by touching the interior parts of the product. @ Be careful so as not to damage wirings. Damaged wiring can cause an electric

WARNING! shock or short circuit accident. @ Do not touch places other than those specified. Touching places not specified can cause an electric shock or short circuit accident. @ In order to prevent an electric shock and short circuit, be sure to turn power off

If Accel and Brake operation is not satisfactory, adjustment of Volume installation position or Volume replacement is needed. Also, be sure to apply greasing to the gear mesh portion once every three months.

10 - 1 ADJUSTING AND REPLACING THE V.R.

When released: When stepped on: Under 30 H Over COH Under 30 H Over COH

Check Volume values in the Test Mode. Since work is performed inside the energized cabinet, be very careful so as not to touch undesignated portions. Touching places not specified can cause an electric shock or short circuit.

@) Take out the 2 truss screws and remove the Front Cover TRUSS SCREW (2; from the Accel. & Brake unit. WX8, chrome

Loosen the screw which secures the Potentiobase, and adjust the Volume Value by moving the Base. Secure the Potentiobase. ©©® © Perform Volume setting in the Volume Setting Mode.

SCREW W5 X12, w/flat washer

VR. 220-5373, 5484

Page 46

Check Volume values in the Test Mode.

Since work is performed inside the energized

cabinet, be very careful so as not lo touch POTENTTOCOVER

undesignated portions, ‘louching places not specified can cause an electric shock or short circuit.

Take out the 2 truss screws and remove the Front Cover

from the Accel, & Brake unit. Loosen the screw which secures the Potentiobase, and adjust the Volume Value by moving the Base. Secure the Potentiobase. ClOMOMEG) Perform Volume setting in the Volume Setting Mode.

POTENTIOBASE

10-2 GREASING

S Be sure to use designated grease. Using undesignated grease can

cause parts damage.

IMPORTANT!

Once every 3 months. apply greasing to the Spring and Gear Mesh portion. For spray greasing, use GREASE MATE

(PART No. 090-0066),

Page 47
  • COIN SELECTOR

HANDLING THE COIN JAM

Tf the coin is not rejected when the REJECT BUTTON is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.

CLEANING THE COIN SELECTOR

The coin selector should be cleaned once every 3 months. When cleaning, follow the procedure below: Turn the power for the machine OFF. Open the coin chute door. Open the gate and dust off by using a soft brush (made of wool, etc.). Remove and cleen smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry. Remove the CRADLE. When removing the retaining ring(Ering), be very careful so as not to bend the shaft. @® Remove stain from the shaft and pillow portions by wiping off with a soft cloth, ete. After wiping as per #5 above, further apply a dry cloth, etc. to cause the coin selector to dry completely. ©OO0O

@ Never apply machine oil, etc. to the coin selector @ After cleaning the Coin Selecting,

IMPORTANT! Insert a regular coin in the normal

working status and ensure that the Selector correctly functions.

COIN INSERTION TEST Once a month, when performing the COIN SW TEST, simultaneously check the following:

O Does the Coin Meter count satisfactorily? O Does the coin drop into the Cashbox correctly? O Is the coin rejected when inserted while keeping the REJECT BUTTON is pressed down? Insert a coin while keeping the Reject Button pressed down and check if it is tejected.

COIN METER

FIG, lie

Page 48

OPTIONAL DOLLAR BILL ACCEPTOR

@ THE COIN DOOR ASSEMBLY USED ON DAYTONA 2 STD Version COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION.

@ THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING VALIDATORS:

HOLE POSITION#1 Mars 2000 series (FORWARD-MOST POSITION)

HOLE POSITION#2 Mars 2000 series DBV45 (JCM)

HOLE POSITION #3 CURRENTLY NOT USED

HOLE POSITION #4 psio1*

*The back flange on the chute can be removed for hold position #4. If the flange is not removed, it may interfere with the back of the cabinent.

The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series upstacker, A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one entry door with a cut-out for a stacker. This one entry door can be ordered through Coin Controls or one of Coin Controls authorized distributors. The part number is 91-4000-01. The Mars stacker can be obtained through an autherized Mars distibutor,

Page 49

SLIM ISIOUMTIBIOLLIS| el SYERCONDER THe ENTRY COIN DOOR* 1850 HOVARD ST., BLK GROVE IL 60007 (847) 228-1810

+ WARS SERIES 2000 UPSTACKER ADAPTABLE

PART #DESCRIPTIONCostPART #DESCRIPTIONCOSTPART #DESCRIPTION
1) (2-4060-1C S-10 AOCEPTOR19.5016) 91-t109-16 RRJECT FLAP ALON, BUCK = 2.7028) 101-0 (AY OC VETER
HEADSO-OIL $-7 18 1.2512.0017) SU-IIN3-O8 BXTRY/REIECT BITTON ee4510-0 4.57 DC ABTER
2) A-A7T-00 PLASTIC CASHOOL7.4018) S1-1117-00 LAEPHOLDER140) 90-1002-01 TER & LOCKOUT SCRET
3) 2O-4189-00 EALLOSTRE, 2200019) S1-1121-00 BAR BOTTOX SPRINGaDW) 200-00 COCTIG BR

a0

4) 90-1002-00 HINGE SCRETa}20} SI-1118-00 GY LAP TEOGE RISE&SU -1019-00 Ye" LOCKTISTBR
5} 90-1003-00 CLAKP SCRUT%Ud SU-L3UL-6 SOTTO Bez BLE2.20
52} M-1312-16 RODICT BEDE BLACK20

r) cy BY M-2125-00 L2F LOCKOUT COTL ASSENBLY 12.85,

  • S-4017-00 SUREF BEZEL NYLON
  • W-1206-02 11-40 TEP NOT po
8) 9-10-00 EEVENOT:21) SA-2216-16 AECROSHTRCA ASSEYBLY5.00
9) 91-0508-16 FRUIT0.0QUA] SU-LHG-16 WICROSTLTCA BLACK5.4
10) 91-0606-00 CLAKPAiST-UNIG-1 VIcROSTITCE THITE5.40
U1) 91-0547-00 DOUBLE D ChE LOCK5.25SH-111G-10 VICROSTITCH BRD$.40
12) 91-0600-16 BLACK W181 book8.402UB) $1-1126-00 VICROSEITCE PLISTIC COMtS
(3) 91-0604-16 2 EXTRY OPER DOOR40.0025) 92-1002-01COIN INLET LWP SIDELW
1d) 91-1008-039 LOCKOUT BRACHET402%) $2-1002-021 COIN TMLET COVER SIDE1.80
(5) 91-4008-107 BASEPLATE ASSEYBLY5.027) 92-1002-10 HOLD WOM BRACKET1.50

JAN. £998 FORW 92-1003-05

Page 50
  • MONITOR

When performing such work as installing and removing the monitor, inserting and disconnecting the external connectors to and from monitor, be sure to disconnect the power connector (plug) before starting work. Proceeding the work without following this instruction can cause electric shock of malfunctioning. Using the monitor by converting it without obtaining a prior permission is not allowed. SEGA shall not be liable for any malfunctioning and accident caused by said conversion.

Primary side and secondary side The monitor's circuit which is divided into the Primary side and secondary side, is electrically isolated. Do not touch the primary side and the secondary side simultaneously. Failing to observe the instruction can cause electric shock, and this is very dangerous. SECONDARY SIDE When making monitor adjustments, use a non- (Chassis, CRT) conductive driver and make adjustment without touching any other part other than the Adjustment PRIMARY V.R. and Knob. Also, be sure not to cause a short- SIDE circuit to the Primary side and the Secondary side. If short-circuited, it can cause electric shock or mal-

functioning, which is very dangerous. @

High tension Voltage Some of the parts inside the monitor are subject to high-tension voltage in excess of 20,000 volts and very dangerous. Therefore, do not touch the monitor interior. Should soldering & paper wastes, etc. be mixed in the monitor, turn the power off so as not to cause maifunctioning or fire hazard.

® ANODE CAP PRIMARY SIDE DEMAGNETIZER REAR PART

ane? ® ANODE LEAD MAIN BD \ ‘Approx. 29 kV

FOCUS LEAD (black) Approx. 10 kV

FBT Approx. SECONDARY SIDE i

(Chassis, sheet metal work, CRT, ete.) € Disconnect or unplug 29kV

Connecting the CRT and PCB For combining the CRT and PCB, use the specified part No. to maintain the status of adjustments made at the factory. The anode of the CRT itself will be accumulitavely charged as time elapses, generating high tension voltage which is very dangerous. The monitor should be used with the Chassis, CRT and PCB assembled. When repair, etc. is required at the time of malfunctioning, be sure to send it in an “as assembled” condition. If these are disassembled, what's charged to said high tension voltage can be discharged, causing a very hazardous situation. Therefore, under no circumstances should it be disassembled.

Static Electricity Touching the CRT surface sometimes causes you to slightly feel electricity. This is because the CRT surfaces are subject to static and will not adversly affect the human body. Installation and removal Ensure that the Magnetizer Coil, FBT (Fly-Back Transformer), Anode Lead and Focus Lead are Not positioned close to the sheet metal work's sharp edges, etc. and avoid damaging the insulated portions so as not to cause an electric shock and malfunctioning. (For the name of parts, refer to the above figures.)

Page 51

For the purpose of static prevention,

special coating Is applied to the CRT

face of this product. To protect the

CAUTION! coating, pay attention to the following

Points. Damaging the coating film can cause electric shack to the customers. For the caution to be heeded when > clearing, refer to the Section of Periodic Aluminum Foil inspection Table. Do not apply or rub with a hard item (a rod with pointed edge, pen, etc.) to or on C.R.T. surfaces. Avoid applying stickers, seals, etc. on the C.R.T. face. Do not remove aluminum foils from the C.R.T. corners. Removing the aluminum foils can cause static prevention effects to be lowered.

A Monitor adjustments have been made at the time of shipment. There- : || fore do not make further adjustment without a justifiable reason.

CAUTION! Adjusting the monitor which contains high tension parts is dangerous

work. Also, an erroneous adjustment can cause deviated synchronization and image fault, resulting in malfunctioning. When making adjustment, utilize a resinous Alignment Rod. Servicing with bare hands or using conductive tools can cause electric shock.

Page 52

NANAO marnitor: 200-524 2—2 4-0 4 (24K mode)

SANWA monitor: 200-524 3-2 4 (24K mode)

ey HBo0og000000

©DQD®O® OO8DTDOD ®D RGAIN GGAIN BGAIN BRIGHT HSWZE HHOLD HPOS! SIZE VHOLD POST

R-GAIN

G-GAIN .......... Controls colors.

B-GAIN

BRIGHT.......... Controls screen brightness. H. SIZE ........... Controls horizontal screen size.

Provides horizontal synchronization, i.e., controls right/left hold.

.. Controls horizontal display position on screen.

Controls vertical screen size.

Provides vertical synchronization, i.e., controls up-down hold.

Controls vertical display position on screen.

CONTRAST.... Adjusts image contrast, GOOQOQVOELHOOLO

Page 53
  • REPLACEMENT OF FLUORESCENT LAMP AND LAMPS

with power on can cause an electric shock or short circuit. accident. @ The Fluorescent Lamp, when it gets hot, can cause burns. Be

( @ When performing the work, be sure to turn power off. Working

very careful when replacing the Fluorescent Lamp.

secure and stable condition. Not using a step or using an unstable step can

M To perform work safely and securely, be sure to prepare a step which is in a

cause violent falling down accidents.

CAUTION!

13-1 REPLACEMENT OF FLUORESCENT LAMP

Q@) Take out the 3 screws and remove the Billboard Lid (rear).

@ Take out the 6 screws to remove Billboard Plate (front), and replace Fluorescent Lamp.

—————s —

SEE A

Page 54
  • PERIODIC INSPECTION TABLE ‘The items listed below require periodic check and maintenance to retain the performance of this machine and ensure safe operation.

( @ Be sure to check once a year to see if Power Cords are damaged, the plug is

securley inserted, dust is accumulated between the Socket Outlet and the Power Plug, etc. Using the product with dust as is accumulated can cause a fire or

WARNING! electrical shock,

Periodically once a year, request the place of contact herin stated or the Distrib- @ uter, etc. where the product was purchased from, as regards to the interior cleaning. Using the product with dust as is accumulated in the interior without cleaning can cause a fire or short circuit accident. Note that cleaning the interior parts can be performed on a pay-basis.

Check Adjusters’ contact with surface, Check lamp. Monthly Check VOLUME VALUE. Monthly Check ADJUST GEAR engagement. Trisonthly Greasing of GEAR. Trimonthly Check VOLUME value. Monthly Check ADJUST GEAR engagement. Trimonthly Gear and Spring portion greasing.

SHIFT LEVERCheck switches.Monthly
COIN CHUTE TORERCheck COIN SR.Monthly

Coin insertion test. Monthly

Check adjustments, Wonthly or when moviog. | 12 | Cleaning of CRT surfaces. | Weekly | 12 SEAT Antistatic measures Applying grease to Seat Rail Trimonthly

GAME BDMEMORY TEST.Monthly

Check settings. Monthly Cleaning As occasion arises. | Next page

INTERIORCleaningAnnual lySee above.

POWER SUPPLY PLUG | Inspection and cleaning

CLEANING CABINET SURFACES

If the cabinet is badly stained, use a cloth which is dipped in the chemical detergent liquid diluted with water and then Squezzed dry. Do not use thinner, benzine, alcohol or chemical dustcloth as these can damage Cabinet surfaces,

SEAT (Greasing to Seat Rail Portion) a

Move the Seat to the rearmost portion and apply spray greasing to the fC

portion shown al the right once every 3 months by using NOK KLUBER L60 or GREASE MATE SEGA PART No. 090-0066. After greasing, move seat a few times forward and backward so as lo allow the grease lo be

applied all over uniformly. Be sure to wipe grease which attaches to the surfaces of the PROTECT RUBBER on the seat Rail, or any excess grease.

Page 55
  • TROUBLESHOOTING Should trouble occur, first check connector connections.

PROBLEMS

With Main SW ON, no activation COUNTERMEASURES

Power is not supplied.

Power supply/voltage is not correct.

AC main fuse causes the power to be cut off due to momentary overload,

Operation is unsatisfactory

Irregular sound emitted from inside Rear Cabinet

The color of the image on PROJ. screen fs incorrect. Volume Setting Failure

Poor mesh of V.R. gear.

Spring failure due to secular change of Accelerator and Brake Mecha.

Greasing to gear mesh portion is not satisfactory, or extraneous matter mixed in.

Connector connections are defective.

The image on PROJ. screen has color deviation.

No sound is emitted.

NETWORK check will not fini

Communication play is not possible. Affected by the magnetic field of installation location. Plug in correctly

Make sure that power supply/voltage is correct. Check fuse. Remove the cause of overload and replace fuse

Perform Volume setting Adjust or replace V.R.

Adjust Gear mesh..

Replace the Spring.

Apply greasing or eliminate extraneous matter.

Check the connection for the RGB and SYNC connectors of the PROJ. TERM: BD and VPM BUFFER BD.

Make CONVERGENCE adjustment. (Refer to Section 12.)

Sound Volume adjustment is not appropriate.

Sound BD and speaker are malfunctioning.

Communication cable’s connection failure.

Communication cable's connection. failure. Communication Play setting is wrong,

No sound from Cockpit.

The Fluorescent lamp does not light up.

Shift operation is not is not satisfactory in Manual transmission. In correct Cabinet Type Setting. Adjust sound volume. (see Section 7).

Perform sound test to find and replace defective parts.(Refer to Section 7).

Perform V.R. setting, Adjustment.

Check for Communication cable disconnection Correctly set in test mode.

Correct Cabinet Type Setting.

The Fluorescent tube is burnt out. Replace the Fluorescent tube (Refer to Section 11).

Shift SW malfunctioning. Replace SW

Page 56
  • GAME BOARD

@ In order to prevent an electrical shock, be sure to turn power off before performing work by touching the interior parts of the product. @ Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circuit accident.

Do not expose the Game BD, etc. without a good reason. In this product, setting changes are made during the test mode. The Game BD need not be operated, Use the Game BD, etc. as is with the same setting made at the

CAUTION! time of shipment.

16-1 REMOVING THE GAME BOARD

To replace the IC Board or to change dip switch settings, take out the IC board using the following procedure;

  • Tum main switch off. () Unlock the base, and remove the 2 truss screws from the side of the base. ® Turn the knob to unlock. The seat can be inclined in the direction shown. When inclining the seat, be careful not to damage seat parts. Carefully rest the backrest portion of the seat on the ground. @ If neccessary, protect the seat from damage by using a cloth or blanket on the floor. ® Take off the 3 screws to remove the case lid. The game board is inside the shield case. © Take off a total of 4 screws from both sides with the seat being in an inclined slate and remove the base lid F, Removing base lid F allows the Elec Base to be seen.

SCREW _(3) / WAXH,«/flat & spring washers

P f CASE LIb

M5X12, black TRUSS HEAD SCREW (2) NaX12, black

Page 57

16 - 2, REPLACEMENT OF FUSE

A @ In order to prevent an electric shock, be sure to turn power off before performing work by touching the interior parts of the product. @ Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circiut accident

WARNING!

@ After eliminating the cause of the blowing of fuse, replace the fuse. Depending on the cause of the fuse blowing, using the fuse as is blown can cause generation of heat resulting in fire.

Incline the Seat and remove the Base Lid to view the Base interior. The composition of the Base interior is as shown below, There is a fuse on each of the Connect BD. and Motor Drive BD. When replacing the fuse, be sure to use the specilicd one.

CONNECT _BD

Page 58

16 -3 COMPOSITION OF GAME BOARD

GAME BD DAYTONA USA 2 TWIN (833-13427)

Screw (1 W3X55, using flat spring washers 13X35, using spring washers

DESCRIPTION WODEL3 STEP2 CPU BOARD MODEL3 STEP2 VIDEO BOARD NODEL3 STEP2.1 VIDEO BD

ROH 6D DAYTONA USA2 4

PART No. 837-12715-91 837-12716-91 837-13368 834-13428 837-11861-91 MODEL3 COMM BD COM

NOTE: THIS PICTURE IS FOR REFERENCE ONLY!! UNIT IS NOT TO BE OPENED. EXPOSING THE GAME

BD FOR ANY REASON MAY VOID WARRANTY.

Page 59

16 - 4 ERROR DISPLAY (DRIVE CONTROL BOARD)

Be Careful so as not to damage wirings. Damaged wirings can cause an electric shock A or short circuit accident. Do not touch places other than those specified. Touching places not specified can

WARNING! || cause an electric shock or short circuit accident.

If an irregularity occurs in the Drive Control Board, etc., the ERROR message is shown on the screen and the 7-SEG display on the Drive Control Board. Take countermeasures in the manner corresponding to the ERROR message. Note that even at the time of error occurence, game play is possible without Steering Wheel reaction.

Among the ERROR display as per the Table listed below, each Er 01, 02, 20, and 22 is displayed if an irregularity is found during initialization setting movements when power is turned on and at the time Test Mode is finished.

From among error displays as per the Table shown below, Er 23, 24, and 25 indicate On-Board 7-SEG error display when an irregularity is found during game and ADVERTISE MODE. If an irregularity is found during game, game play can be continued without Steering Wheel reaction.

7-SEG displ:

Er 01 ROM ERROR Malfunctioning of Drive Control Board.

Er 02 RAM ERROR Replace Drive Control Board.

Initialization Irregularity during initialization setting movement. setting irregular- | Finish initialization setting movement by tuming ity of motor power off and then on. Note that when ERROR is displayed,the malfunctioning relates to the Motor System (Motor, Drive Control BD which controls the Motor, Drive BD., wirings in between, etc.)

Er 22 Steering Wheel’s | Malfunctioning during initial setting movement. centering error Finish initialization setting movement by tuming power off and then on . Note that when ERROR is displayed,the malfunctioning relates to the Steering Wheel Volume system.

Er 23

Er 24

Er 25 ERROR of the Encoder incorporated in the motor. Malfunctioning which occurs during operation. First tun the power off and after 10 min., tum it back on again. Note that when this Error is displayed, the malfunctioning relates to the Motor System.

Overcurrent ERROR

Overheat Overload

Page 60

If ERROR display is shown on the sercen, incline the Scat WITHOUT TURNING POWER OFT, and remove Back Lid B (o check the 7-SEG display ont he Drive Control Board. At this time, if the power is Lumed off, each of the Er 23, 24, and 25 which could have occured during operation may nol be displayed.

BACK LID B

SCREW (4) black M4x8, w/flat & spring washers

DRIVE CONTROL BD

Page 61
  • COMMUNICATION PLAY

® Before performing between-cabinets connection work, be sure to turn the Power SW OFF and unplug the power plug from the wail socket. Failure to observe this can cause electric shock and/or short circuit accidents. Perform assembling as shown in this manual. Erroneous assembling can cause electric shock accidents and malfunctioning.

By linking 4 machines, up to 4 persons can play simultaneously. Although accessory parts are to be installed for communication play, some of the parts will remain as spares.

17-1 INSTALLATION PRECAUTIONS

@ Simple muitipte machines are to be linked, sufficient

power corresponding to the number of machines used

need to be supplied, As standard, amperage is 15A (AC100~110~120V area).

@ Due to the parts used for communication play, interval between machines (cach pair) is 20 cm, when connecting three or more machines together, If parts are not installed, adjascent players will come into contact with each other and this can cause accidents and trouble.

17-2 CONNECTING THE COMMUNICATION CABLES

Gr0¥) The Communication Cable is optic-fiber made and break if excessively bent. Handle

IMPORTANT!

The Protect Tube is used to link plural machine units and the communication cables are caused to pass through the Protect Tube. Depending on the number of machine units to be linked, connect the communication cables in the manner descibed on page 58.

Page 62

® To connect your Daytona 2 game with others, setup with one cabinet on the left and one cabinet on the right sides of the Coin Chute Tower In the parts bag located in the cash box, locate the Opto Cable. this will be needed later, to connect together the opto connections on the rear of the Cash Box Tower. The hardware needed to assemble your Daytona 2 game has been threaded into the proper holes. This was done to insure the bolts thread properly

into the T nuts in the Cabinet. @ At this time remove the rear cover of the Cash Box Tower. @ Notice the wire harness taped to both sides of the cabinets and Cash Box Tower. On the wirehamess connections Black is for the left side, yellow is for the right side viewed from the front. Locate left side cabinet (on/off switch) and Cash Box Tower. Connect the 15, 4 and 2 position connectors together. At this time connect the Opto cable (without white lable) to the Opto connection nearest to the left side of cabinet (viewed from the front). These Opto connections are in the rear of the Cash Box Tower. @ You may elect not to connect the connector at this time, but carefully push connectors in the hole so they are still accessible from the outside of the cabinet. ® There are 4 bolts in the NON SLOTTED HOLES, on the side of the cabinet, the 2 on top under the the ledge must be removed. The 2 on the bottom must be loosened about 1/4 inch. Lift up the Cash Box Tower and using the 2 lower slotted holes on the bottom of the Cash Box slip them over the lower protruding bolts and slide the cash box into place, Open the Coin Door and install the 2 upper bolts through the cash box into the cabinet. tighten all 4

bolts. © The Right side of the cabinet gets installed the same way as the left side.

{_} oP TX RX

Rear View of Cash Box Tower

—O CONNECTOR REO (RX)

——@ CONNECTOR BLACK (TX)

Connect Cables with White Labels Together

¢ e <

No.1 No.2 MASTER SLAVE

2P LINK SYSTEM

Page 63

‘AC UNIT

CABINET CAR 2P LINK

Page 64

17 - 3 SETTING FOR COMMUNICATION PLAY

cause, ERROR MESSAGE will be displayed, then NETWORK check mode appears on the screen automatically.

S During communication play, if communication is interrupted due to a certain

IMPORTANT!

Cause all of the seats to enter the Test Mode and change the GAME ASSIGNMENTS of each seat for communication

play. Refer to the section on Explanation of Test and Data display for changing procedure,

@ Press the TEST button to enter the test mode and choose “GAME ASSIGNMENTS”.

  • Bring the arrow to LINK TYPE and press the TEST BUTTON and set plural numnber of machines sequentially to CAR 1, CAR2, CAR3 and CAR¢4 as applicable starting from the extreme left facing the monitor's front side. If the same number is set for 2 or more cabinets, or if the sequential order is incorrect, the game display, etc. will be confused (different from the actual status). Therefore, be careful of this point.

(©) In case of communication play, only the settings of GAME DIFFICULTY and GAME MODE need to be performed by the MASTER seat. All other seats (SLAVE) are subject to the setting made by the MASTER CARL seat. ‘The above setting change made by any SLAVE seat is not effective and will not be reflected on the game.

GAME ASSIGNMENTS

ADVERTISE SOUND ON

DIFFICULTY NORMAL

GAME MODE NORMAL DEFAULT VIEW DRIVER SPEED KM/H DISPLY URL OFF CABINET TYPE TWIN LINK TYPE MASTER (CAR1) >EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

Page 65
  • DESIGN RELATED PARTS
Page 66

DESIGN RELATED PARTS

PART NO.

DYN-0011 421-7308~ 422-0660-01 422-0661-01 SPG-1201-E DYN-1214-C DYN-1214-D DYN-1214-E SPG-2002 DUT-1031-B DUT-1046-B 421-9749-03 DUT-1501-A DUT-1501-B DUT-1511-A DUT-1601-A. DUT-2201-C DUT-2201-D DUT-2201-E 999-0704 DESCRIPTION

DENOMI PLATE W/O ORIGINAL DENOMINATION SHEET ! GAME~ PLAY INSTR SH DUT TWIN ENG SUB INSTR SH DUT TWIN ENG METER PANEL DESIGN PL TACO MTR TWIN DESIGN PL OIL METER TWIN DESIGN PL WATER MTR TWIN STEERING EMBLEM STICKER SIDE L STICKER SIDER STICKER SEGA LOGO LUMI TELLOW STICKER BASE L STICKER BASE R STICKER BASE LID STICKER CAR NO. 1 STICKER DAYTONA USA 2 STICKER LOWER STICKER UPPER BILLBOARD COVER FRONT DUT

Page 67
  • PARTS LIST

TOP ASSY DAYTONA USA 2 TWIN

ITEM NO. PART NO.

1 DUT- 10001 3 999-0706 4 SPG-0300 5 422-0661-01 19 DUT-0001 21 SPG-0006 22 INY-0004 23 DYN-0008 24 DYN-0009 TORQUE: W8_19Skgf-cm Under M4(M SCR) l0kgf+cn

DESCRIPTION

ASSY COCKPIT iP ASSY BILLBOARD ASSY COIN CHUTE TOWER

SUB INSTR SH SRT TWIN ENG

BLIND CAP AC COVER BACK LID INY BACK LIDB HOLE LID

Page 68

ASSY BILLBOARD STD (999-0706)

ITEM NO.

Stene =——

SEE A

PART NO. DESCRIPTION

SRT-0203 BILLBOARD CASE

SRT-0204 BILLBOARD LID

999-0704 BILLBOARD 253-5457 FL HOLDER, LOCAL PURCHASE ASSY FL 20W EX W/CONN HIGH S

Page 69

ASSY COINCHUTE TOWER (DUT-0300)

Page 70

ASSY COINCHUTE TOWER (DUT-0300)

ITEM NO, PART NO.

1 SPG-0350 2 SPG-0301 3 DYN-0302Y 4 DP-1167 3 BOX-CASH 10 DYN-0305 1 105-5202 12 SPG-0302 13 SPG-0303 101 220-5237-92 102 220-5412 103 220-5412-01 104 220-5574 105 220-5575 DESCRIPTION

SW UNIT COIN CHUTE TOWER COIN METER BRKT TNG LKG CASH BOX TOWER BRKT HOLE COVER - WIRE BOX WIRE BOX LID ASSY C.C.2DR MAG CNTR W/CONN MAG CNTR W/CONN BLACK CAM LOCK W/KEYS CAM LOCK MASTER W/O KEY

Page 71

SW UNIT (SPG-0350)

WIRE ADJUSTMENT, 600-6373-67 ————— BLUE 600-6373-67 ———— BLUE 600-6373-67 — ORANGE/WHITE 600-6373-67 — WHITE/BLACK §00-6373-67 — PURPLEMWHITE 600-6373-67 — WHITE/BLACK BLUE —---—~ 600-6373-53 BLUE ——-—— 600-6373-53 ORANGE/WHITE — 600-6373-53 WHITE/BLACK +=— 600-6373-53 PURPLE/WHITE — 600-6373-53 WHITE/BLACK +— 600-6373-53 600-6873-065 — WHITE/BLACK 600-6873-065 — GREEN/BLACK 600-6873-065 — YELLOW/BLACK WHITE/BLACK +— 600-6873-064 GREEN/BLACK — 600-6873-064 YELLOW/BLACK — 600-6873-064 600-6373-68 ——- WHITE/RED WHITE/RED. —— 600-6373-55 600-6373-68 —— GREEN/RED GREEN/RED_ —— 600-6373-55 600-6373-68 — YELLOW/RED YELLOWRED — 600-6373-55

ITEM NO. PART NO. DESCRIPTION

1SPG-0351SWITCH BRKT
101509-5028SW PB IM

102 220-5179 VOL CONT B-5K OHM

103601-0042KNOB 22MM

105 310-5029-F20 SUMI TUBE F F 20MM

Page 72

AC UNIT (DUT-0400)

TEM NO. PART NO.

DUT-0401 600-5843-25 280-5134-6N34 512-5046-15000 509-5453-91-V-B 280-0417 211-5479-01 DESCRIPTION

AC BRKT CA & PLUG ASSY 15A W/F-L=2.5M BUSHING STRAIN RELIEF 6N34 C.P 15000mA CE UL SW ROCKER J8 V-B TERMINAL BINDING POST BLACK CONN OPT JOINT

Page 73

ASSY MONITOR COVER L 1P (DUT-1030) ASSY MONITOR COVER R 1P (DUT-1045)

SECTION A-A

ITEM NO. PART NO. DESCRIPTION

1 DUT-1031 COVER PANEL L IP

DUT-1046-01 COVER PANEL R 1P EXP

2 SPG-1100 ASSY SPEAKER 3 DYN-1032 MASK BRKT

Page 74

ASSY SPEAKER (SPG-1100)

ITEM NO. PART NO. DESCRIPTION

1 INY-1701 SPEAKER BRKT 101 130-5152 SPKR BOX MINI DOME 12W

Page 75

ASSY VIRTUAL BUTTON TWIN (OYN-1290)

ITEM NO. PART NO. DESCRIPTION

1DYN-1291VR BUTTON BRKT
2171-6478BPC BD LIGHTING SWX5
101212-5205-12CONN JST M 12P RTA
102509-5560-YPB SW W/L 6V ILY
103509-5561-RPB SW W/L 6V 5LR
104509-5561-SPB SW WIL 6V5LS
105509-5561-YPB SW WAL 6V SLY
106509-5561-GPB SW WIL 6V SLG
Page 76

ASSY BASE BOX (DUT-1500)

ITEM NO. PART NO. DESCRIPTION

1DUT-1501MAIN BASE
2DYN-2003BASE LID F
3DYN-2004LOCK TNG
4DYN-2005XFLOOR MAT
5DYN-2006HINGE 480
6DUT-1510ASSY BASE LIDR
7DYN-2007XLID EDGE L
8DYN-2009KLID EDGER

101 220-5575 CAM LOCK MASTER W/O KEY

Page 77

MAIN BASE (DUT1-1501)

ITEM NO.

Ubon PART NO.

DYN-2002X-A. DUT-1501-A. DUT-1501-B 999-0167 999-0169 DESCRIPTION

MIAN BASE BLANK STICKER BASE L STICKER BASE R LEG ADJUSTER BOLT 1/2X13X3 CASTER 2 1/2"

Page 78

af ASSY SEAT TWIN 1P (DUT-1600)

Page 79

ASSY SEAT TWIN 1P (DUT-1600)

ITEM NO,

CHIYDMALNE PART NO.

STC-1650 DUT-2202 DUT-2203 STC-2201 STC-1604 DUT-1601 STC-1606 STC-1607 STC-1608 STC-1609 STC-1610 STC-1611 STC-1612 STC-1613 INY-1302-B 601-9059 601-9060 130-5159 601-6563-188 601-6563-100 280-5297 000-P00410-W 030-000816-S 050-H00800 060-S00800 000-T00616-0B 010-P00408-F DESCRIPTION

ASSY WOOFER. UPPER SEAT LOWER SEAT SEAT BASE SEAT FRAME SEAT REAR COVER IP SEAT MOUNT TRAY SP MOUNT BRKT SPEAKER NET L SPEAKER NET R SAFETY GUARD CABLE BEAR BRKT PROTECT RUBBER SAFETY GUARD F MASK CUSHION SIDE SEAT RAIL L SEAT RAIL R GULL BOX SPEAKER 800HM 5W BUSH 2.4T BUSH 2.4T SCRIVET 8 1K31 M SCR PH WI/FS M4X1i0 HEX BLT W/S M8X16 HEX NUT M8 SPR WSHR M8 M SCR TH BLK M6X16 S-TITE SCR PH W/E M4x8

Page 80

ASSY WOOFER (STC-1650)

ITEM NO. PART NO. DESCRIPTION

1 STC-1651 WOOFER BRKT F 2 STC-1652 WOOFER BRKT R 101 130-5160 SUB WOOFER 4 OHM 30W

Page 81

ASSY 4 SPEED SHIFTER (SPG-2150)

“) For EARTH

For EARTH

Page 82

ASSY 4 SPEED SHIFTER (SPG-2150)

ITEM NO. PART NO, DESCRIPTION

1SPG-2151SHIFT KNOB
2SPG-2152STOPPER RUBBER
3SPG-2153FRONT BASE
4SPG-2154SLIDE COVER
5SPG-2155SLIDE PLATE
6SPG-2156REAR BASE
7SPG-2157RUBBER BLOCK 45
8SPG-2158RUBBER BLOCK 65
9SPG-2159INSULATOR SHEET
10SPG-2160SHAFT CASE
11SPG-2161SHAFT BOLT
12SPG-2162CENTERING BLOCK
13SPG-2163RUBBER CASE
14SPG-2164.ROLLER BOLT
15SPG-2165ROLLER SUPPORT
101100-5252BEARING ROLLER 25
102100-5193GROMMET 11
103100-5170BEARING 8
104509-5636SW MICRO TYPE SS-5GL2T
106280-5306SPACER FAI 6X30
107280-5307SPACER FAI 8X55
201000-F00406M SCR FH M4xX6
202000-000410-WMSCR PH W/FS M4X10
203000-P00420-WM SCR PH W/FS M4X20
204000-P00508-WM SCR PH W/FS M5X8
205050-H00600HEX NUT M6
206060-S00600SPR WSHR M6
207065-S010S0-ZSTP RING BLK OZ S10
208FAS-00033M SCR PH WIS M2.3X12
209FAS-650008‘WAVE WSHR 12,7-18.1X2.5
210FAS-450006SPR PIN WAVE STN 5X45
Page 83

6L (00@Z-DdS) TAVUG THOOV ASSV

Page 84

ASSY ACCEL&BRAKE (SPG-2200)

ITEM NO. PART NO.

1 SPG-2201 2 SPG-2202 3 SPG-2203 4 SPG-2204 5 SPG-2205 6 SPG-2206 7 SPG-2207 8 SPG-2208 9 SPG-2209 10 SPG-2210 i SPG-2211 12 SPG-2212 13 SPG-2213 14 SPG-2214 15 SPG-2215 16 SPG-2216 7 SPG-2217 19 SPG-2219 20 SPG-2220 21 SPG-2221 101 100-5263 102 220-5484 104 601-7944 105 310-5029-F15 106 280-0419 201 028-A00304-P 202 020-000520-0Z 203 000-P00420 204 000-PO0S08-W 205 000-T00408-0C 206 FAS-450005 207 000-P00405 208 FAS-000001 209 050-H00500 210 060-F00400 DESCRIPTION

BASE ACCEL PEDAL BRAKE PEDAL ACCEL SPRING BRAKE SPRING SHAFT ACCEL GEAR BRAKE GEAR NUETRAL STOPPER VR PLATE ACCEL VR PLATE BRAKE AMPL GEAR GEAR SHAFT STOPPER RUBBER CUSHION COVER VR COVER GEAR STAY WSHR NUETRAL STOPPER BEARING 12 VOL CONT B-5K OHM GEAR 15 SUMI TUBE F F 15MM. HARNESS LUG SET SCR HEX SKT CUP P M3X4 HEX SKT H CAP SCR BLK M5X20 M SCR PH M4x20 M SCR PH W/FS M5X8 M SCR TH CRM M4X20 SPR PIN BLK OZ 6X10 M SCR PH M4X5 M SCR TH CRM M3X6 HEX NUT M5 FLT WSHR M4

Page 85

ASSY HANDLE MECHA (SPG-2500)

FASTENING TORQUE TO BE

Page 86

ASSY HANDLE MECHA (SPG-2500)

ITEM NO.

WHNAWAWN= PART NO.

SPG-2501 SPG-2502 SPG-2503 SPG-2504 SPG-2505 SPG-2506 SPG-2507 SPG-2108 SPG-2109 SPG-2453 ASK-3502 ASK-3503 DYN-1270 SLC-1130 SPG 2454 350-5448-01 100-5112 601-8966 601-6172 601-6959 601-9173 220-5484 310-5029-F20 DESCRIPTION

HANDLE BASE BASE LID HANDLE SHAFT PULLEY 20 SSM PULLEY 60 S5M MOTOR BRKT VR BRKT STOPPER BOLT STOPPER RUBBER KEY 4X4X40 MOTOR SPACER MOTOR COLLAR STOPPER KEY ADJUST RING MOTOR SHAFT COLLAR SERVO MOTOR 500W NEW BEARING 17 GEAR HOLDER GEAR 48 GEAR 64 TIMING BELT VOL CONT B-5K OHM SUMITUBE F F 20MM

Page 87

ASSY SOUND BD (DUT-4150)

90000000 600060060 16990060000 oO oO

or oO

° o

Oo oO oO oO oO °° E9000: OO

TEM NO. PART NO. DESCRIPTION

1 105-5315 SHIELD CASE MPEG

2105-5316SHIELD CASE LID MPEG
3105-5317SHIELD CASE BRKT MPEG
4837-13429SOUND BD DAYTONA USA2
5839-1021FLT BD DIGITAL SOUND
Page 88

ASSY SHITELD CASE (DUT-4300)

ITEM NO. PART NO.

1 105-5245X 2 105-5242 3 839-0932 4 833-13427 101 260-0064 DESCRIPTION

SHIELD CASE MODEL 3 NVS SHIELD CASE LID MODEL 3 FILTER BD MODEL 3 SPG. GAME BD DAYTONA USA2 FAN MOTOR DC 12V

Page 89

ASSY MAIN BD BASE (DUT1-4400)

FTEM NO. PART NO. DESCRIPTION

1 SRT-4401 WOODEN BASE 2 DUT-4600 ASSY SHIELD CASE 3 105-5241 SHIELD CASE BRKT 5 105-5319 CONNECTOR PANEL BRKT 101 400-5330-02-91 SW REGU FOR MODEL 3 400-5330-03 SW REGU FOR MODEL 3

Page 90

ASSY ELEC BASE (DUT-4500)

EILTER 8D POSITION

14-47 OFFI 9-12 [OFF | L5-16 JOFF I 10-17 TON J

PART NO,

DUT-4501 DUT-4150 839-0718-01 839-0542 838-11856-01-UL 838-13475 838-11651-91 BY-4102 560-5393 LOCAL PURCHASE 560-5394 260-0011-02 601-8543 DESCRIPTION

WOODEN BASE ELEC ASSY SOUND BD 4A DC SSR BD CONN BROWN AUDIO MIX BD CONECT BD W/FUSE &COVER UL PWR AMP 4CH & MIXER. LOWPASS AMP FAN MOTOR BRACKET XFMR 200-240V 100V 8Ax2 WB 7A slo FUSE XEMR 100V 14V10.5A WB AXIAL FLOW FAN AC100V 50-60 Hz FAN GAURD

Page 91

ASSY DRIVE BD TWIN (DUT-4550)

ITEM NO.

ene PART NO. DESCRIPTION

SRT-4551 WOODEN BASE DRIVE TWIN

838-12912-01 SERVO MOTOR DRIVE BD NEW 838-13481 DRIVE BD DUT

Page 92

ASSY COCKPIT 1P (DUT-10001)

wit: oat ers f= £ M

Page 93

ASSY COCKPIT 1P (DUT-10001)

ITEM NO. PART NO. DESCRIPTION

1DUT-20001ASSY MAIN BASE 1P

2 DUT-1030 ASSY MONITOR COVER L IP 3 DUT-1045 ASSY MONITOR COVER R IP EXP 4 DUT-12001-01 ASSY CONTROL PANEL TWIN EXP

5SPG-1004MONITOR STAND
6SRT-1002WIRE COVER BOX
7INY-1016MONITOR SUPPORT

8 SPG-1008 ROOF LID

9TTR-1067XMONITOR MASK
10SPG-1005MASK HOLDER
1DYN-1025RUBBER CUSHION
12INY-1015CRT ADJUST PANEL
14DUT-4550ASSY DRIVE BD TWIN

101 200-5242-24-04 ASSY CLR DSPL 29 TYPE 100V 200-5243-24 ASSY CLR DSPL 29 TYPE 24K 100V¥

105280-5112BUSH FOR TV
106280-5113COLLAR FOR TV
107280-5114SPACER 6.4-25x2
108280-5185-6SPACER TUBE L=6
109601-6231-C100EDGING NEW TYPE
Page 94

ASSY CONTROL PANEL (DUT-12001-01)

@: ‘ ene

Page 95

ASSY CONTROL PANEL (DUT-12001-01)

ITEM NO. PART NO. DESCRIPTION

1SPG-2001STEERING WHEEL
2DYN-1209XHANDLE COLLAR
3SPG-2002STEERING EMBLEM

4 DUT-1201-01 CONTROL PANEL COVER ENG

5SPG-1205CONTROL PANEL BRKT
6DYN-1222SHIFT COVER A
7DYN-1223XSHIFT COVER B
8SPG-1203FAN BRKT
9SPG-1204SPL BLT M&
10SPG-2500ASSY HANDLE MECHA
llSPG-2150ASSY 4 SPEED SHIFTER

12 SRT-1290 ASSY VIRTUAL BUTTON TWIN

13SPG-2039SPACER RING
14601-8543FAN GUARD

101 260-0011-02 AXIAL FLOW FAN AC 100V 50-60HZ,

Page 96

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 97

ASSY MAIN BASE 1P (DUT-20001)

ITEM NO.

mo SSVmuVVaALNA = PART NO.

DUT-1500 DUT-1600 SPG-2200 DUT1-4400 DUT-4500 DUT-0400 SPG-1502 RAL-2007 RAL-2008 SPG-1503 260-0011 DESCRIPTION

ASSY BASE BOX

ASSY SEAT TWIN IP

ASSY ACCEL&BRAKE ASSY MAIN BD BASE ASSY ELEC BASE AC UNIT MAIN EXP PEDAL BASE RUBBER HOLDER R TWIN RUBBER HOLDER L TWIN FAN BRKT AXIAL FLOW FAN AC100V 50-60 HZ

Page 98

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 99

E) i El

(9/1-G) NVHDVIC SNIMIA 9 9 pisces eneneceoe pte mene cee nner eee nee nema emen smear seatnnnen iminrmentnemenias necsaunementntneminemimenemsnmementnemintae apc men snee te emmenses . i dt Aldya0a ass LOOLL/0001-1N4 j

& Fat wees femmes TwLISG os NS Wo1-6e8, Ei seeee3— see ce any Bz aN SYR L6-LSS Eee

8 aRnOs ASSY TH te at asva MIVA ASSY Lootz/ 19002-100 ; [emenen nescint ntnee nn ‘ one

on bet te{ VOL@AbL I

i i i i :: x re o v9 @ A00

Ko? 1 niemiond

Page 100

ASSY WAIN BASE 1P

DUT-4400 ASSY MAIN BD BASE

400-5330-02-91 or 400-5330-03 « ‘SW REGU FOR MODEL3 MPU Ac LoeDEY TUT 9. ST 1A i a a = 4 oa “4 © c S. iar 701) 8, a @ ithe Pies eealenewdet} © cares Fa 's038 13828

af anit

839-0932 FILTER BD NODEL3 SPG

833-13427 GAME BD DAYTONA USAZ

WODEL3 STEP2,0 or STEP2.1 com ED & PFS ED

ASSY_ SHIELD CASE,

837-13429 SOUND BD DAYTONA USAZ

DUT-4150 _ASSY SOI

fouT-4300,_ WIRING DIAGRAM (D-2/6) ra

F $$ _______

G

Page 101

ASSV MAIN BASE IP DUT-20001

DUT-10001

AC UNIT MAIN

ASSY BILLBOARD

SEE (5/X) SEE (4/x)

WIRING DIAGRAM (D-3/6) E . 7 G

Page 102

A

WIRING DIAGRAM (D-4/6) F G

Page 103

meetin we |

ASSY COCKPIT 1P/2P 838-12912-01

SERVO MOTOR DRIVE BD NEW

foogoods—beossacgectecssvede

DYT-0200 WIRING DIAGRAM (D-5/6) € T D . E — F TS

Page 104

e J B = = g CAR2(SLAVE)

DAYTONA USAZ

GAME BD

833-13427 DAYTONA USA2

833-13427

RANSHIT (BLACK) RXsRECEIVE (“ (RED)

CART(SLAVE)

CARS( SLAVE)

CAR3(SLAVE)

CAR2(SLAVE)

CART (MASTER) 833-13427

DAYTONA USA2

833-13427 GAUE BD DAYTONA USA2

8933-13427

DAYTONA USA2

833-13427 GAWE BD DAYTONA USA2

833-13427

1}

833-13427 GAUE BD DAYTONA USA2

13427 833-| GARE BD DAYTONA USA2

CAME BD DAYTOHA USA2 833-13427 *

. WIRING DIAGRAM (D-6/6) F G

Page 105

Come see Sega GameWorks Service Department’s Homepage

‘Welcome to the

Service Department Home Page

The following options are available to you -: What's new on the site check Here ~ Look up your loco! Sega Distributor.

Ge to individual Manuals and Bulletins Find an Individual Part Number

Find a Manual Part Number

Get Info on your Game Monitor

Get Info on your Board System Talk to the Service Staff Sign up to Recelve Service Bulletins What Is golng on in Darl's Office

Sega GameWorks Service Department Phone (415)-802-1750 Fax (415)-802-1754

Page 106

SEGA

SEGA ENTERPRISES, INC. (USA)

45133 Industrial Drive Fremont, CA 94538 650-802-1750 phone 650-802-1754 fax ce