Donkey Kong Operation Manual (TKG-3-UP)
Donkey Kong (US set 1) (Nintendo of America, 1981) · Document · 26 pages · 4 sections · original scan
DENKEN AKAGH
OPERATION MANUAL
“MODEL N NO: TKG3-UP |
r This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the inst-
ructions manual, may cause interference to radio communications. As temporarily permitted by regulation it has not been tested for compliance with the limits for Class A computing devices pursuant to Subpart J of Part 15 of FCC Rules, which are designed
to provide reasonable protection against such interference. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will
be required to take whatever measures may be required to correct the interference.
"ONTENTS
CAUTIONS nee 1
SPECIFICATIONS Bee ee 2
INSTALLATION OF THE MACHINE
- Cautions on installation = = eeeeeeerees 3
- Earthing of machine 2 et eeereeeee 3
MAINTENANCE AND INSPECTION
- Dismounting of front screen — eeeeeeeeers 4
- Dismounting of operation panel — ....eeeeeee 4
POINTS AND METHODS OF ADJUSTMENT
- CPU P.C.Board tt teenies 5
- CLK P.C.Board nt ee ete 6
- SOU P.C.Board te te ene 6
- Video Monitor teeter tees 7
WIRING AND CONNECTION hv eee eee 8
NAME OF EACH PART
- Body a tee 9
- P.C.Board ke eee 11
- Operation Panel Assembly 2 2 eeeerereees 12
PART LIST 2 13
P.C.Board should not be exposed direct to the sun. Direct sunshine is very harmful to LSI (memory element).
P.C.Board to be stored or transported should be wrapped by a conductive pouch or aluminum foil, because LSI and IC used in the machine are semiconductor integrated circuits of which basic element is MOS-FET.
When images on the Video Monitor screen are disturbed by powerful noise or other electrical causes, turn the main power off once and then on again.
- SPECIFICATIONS
| Power Consumption | : | 118W |
Size 600(W) x 850(D) x 1700(H)mm.
| Weight | : | 100 Kgs. |
| Number of Player | 7 | 1 or 2 person(s) |
Number of Jumpman 3 ~ 6 (Adjustable)
Accessories Operation Manual : 1 copy Key for Back Door : 2 pes.
Key for Coin Box Door : 2 pes.
Fuse : 4 pes.
100~120V : 5A X 1, 4A X 2, 0.3A X 1
220~240V : 4A X 2, 3A X 1, 0.3A X 1
3-1 Cautions on installation
- The power cord of the machine should not be connected to a wall outlet together with large load unit(s) such as motor, cooler,etc.
- Turn the power off before setting ‘and removing the P.C. Board and connectors. Carefully handle them.
{3) Do not touch IC, LSI and other electronic parts on P.C. Board. Do not use a tester or the like on them. (They may be damaged by the inner voltage of the instruments.)
- When exchanging a fuse, use a new one of the prescribed capacity
- The machine should be installed where it is not hot, keeping away from a heating appliance and direct sunshine.
- The machine should be installed where it is not wet and dusty.
- Do not touch the inside of the video monitor which has high tension units. Inform service station, if necessary.
3-2 Earthing of machine
- When the machine is installed in a wet place, it should be grounded to avoid accident by an electric shock.
- Connect an earthing wire to the earthing terminal of the machine.
- The opposite end of the earthing wire should be connected to an earthing bar which is firmly inserted into the ground.
- Cautions
- Do not connect the earthing wire to a water pipe, because polyvinyl-choloride pipes are sometimes used in the water lines and, if so, the electronic continuity is cut at the points.
- Do not connect the earthing wire to the gas pipe absolutely. That is very dangerous.
- MAINTENANCE AND INSPECTION
Front Sereen
Uperation Panel
Fastener
Front Door 4-1 Dismounting of front screen
Opening the back door, pull the front screen clamp which is mounted under the top plate. Pull the front screen upward while pushing and then pull toward you.
Front Screen Clamp
4-2 Dismounting of operation panel
To dismount the operation panel for maintenance or inspection of the Control Unit or Micro Switch, open the front door and unfasten the fastener.
- POINTS AND METHODS OF ADJUSTMENT
5-1 CPU P.C.Board
The number of Jumpman, score level, the number of
coin and type of machine can be set with the switches on CPU P.C.Board according to the diagram below.
Number of Jumpman
Score Level for extra Jumpman
7,000 points 10,000 points 15,000 points 20,000 points
Coinage
coin /1 play coin plays i plays plays coins/1 play coins/1 play coins/l play coins/1 play
Table/Upright
Table Upright
5-2 CLK P.C. Board
Semi-fixed resistors, VR1 and VR2 on CLK P.C. Board are used to adjust video monitor screen. oll Lt © Qa a vRt VRE
TKG3-04-CLK
° °
VR 50KQ 0.3W top type T C) Turn right to move VR? 50KQ 0.3W top type CY Turn right to move
white knob image downward.
white knob image leftward
5-3 SOU P.C. Board
Semi-fixed resistor VRI on SOU P.C. Board is used to adjust sound balance.
TKG3-05-SOU
10KQ = 1/5W plain type white knob | Balance of effective sound []
5-4 VIDEO MONITOR
——— BRIGHT
SOUND VOLUME
Fuse 4A
Video Monitor Main P.C. Board
Fuse 0.3A
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
7, NAME OF EACH PART
- Body
n-24 “ OL-01-01 AA
1-01-05 | 01-03 | oes
- P.C. Boar
07-00 TKG CPU P.C. Board P.C. Board Mounting Bracket Ol-12 15-00 TKG SOU P.C. Board
01-20 P.C. Board Spacer (Medium)
01-20 P.C. Board Spacer (Medium)
Removing P.C. Board Spacer
Press the claw with a pincette, as illustrated, and pull out the P.C. Board.
23-50 4 Way Control Lever A’ssy
- Operation Panel Assembly I
I
21 23-23 93-34 a 23-51 . _ 23-22 23-26 ee 2 23-13 N 20 23-20 N 2 ~ a“ 23-12 aad < 2310
01-01-04
~12-
- PARTS LIST
l. Body ; [ FOB Japan |
| No. | Name of Parts | Q’ty | Remarks | per pe. |
TKGU-01-01-01 | Body 1 TKGU-01-01-02 | Transformer Base 1 TKGU-01-01-03 | Cash Box 1 TKGU-01-01-04 | Control Lever A’ssy Base 1 TKGU-01-01-05 | Back Door 1
| TKGU-01-02 | Coin Selector | 1 | T |
| TKGU-01-02-01 | Coin Switch | 1 | T | |
| TKGU-01-03 | Back Door Lock | 1 |
TKGU-01-04 | Front Door Lock 1
| TKGU-01-08 | Power Cord | 1 | |
| TKGU-01-10 | Strain Relief Bushing | 1 | T |
| TKGU-01-11! | Game Counter | 1 | T |
| TKGU-01-12 | P.C. Board Mounting Bracket | 1 | T |
| TKGU-01-20 | P.C. Board Spacer (Medium) | 16 | T |
| TKGU-01-22 | Operation Panel | 1 | |
| TKGU-01-23 | Front Screen | 1 | |
| TKGU-01-24 | Name Plate | I | |
| TKGU-01-26 | P.C. Board Spacer (Small) | 10 | T |
| TKGU-01-28 | Front Door Ass’y | 1 | ‘| |
| TKGU-01-29 | Fluorescent Lamp A’ssy | 1 | |
| TKGU-01-30 | Caster | 2 | |
| TKGU-01-31 | Operation Panel A’ssy | 2 |
Fastener (A)
| TKGU-01-32 | Adhesive Tape | 1.9m | |
| TKGU-01-33 | Service Switch | 1 | T |
| TKGU-01-34 | Screen Filter | 1 | |
| TKGU-01-39 | Control Lever A’ssy | 1 | ; |
Mounting Plate
| TKGU-0141 | Control Lever Knob | 1 |
| TKGU-01-43 | Speaker | 1 |
| TKGU-01-53 | Front Screen Frame (Lower) | 1 |
| TKGU-01-55 | Operation Panel A’ssy | 2 |
Fastener (B)
| TKGU-01-64 | Service Switch Bracket | 1 |
| TKGU-01-65 | Strain Relief Bushing Plate | 1 |
| TKGU-01-67 | Blind Cardboard (Large) | 1 |
| TKGU-01-68 | Blind Cardboard (Small) | 1 |
| TKGU-01-70 | Control Knob Plate | 1 |
FOB Japan
| No. | Name of Parts | Q’ty} | Remarks | ber pe. |
| TKGU-05-00 | CLK P.C. Board | 1 | T (TKG3-04-CLK) | |
| TKGU-06-00 | Video P.C. Board | 1 | T (TKG3-04-Video) | |
| TKGU-07-00 | CPU PC. Board | 1 | T (TKG3-04-CPU) | |
| TKGU-15-00 | SOU P.C. Board | 1 | T (TKG3-05-SOU) | |
| TKGU-08-00 | (PP-7A) Power P.C. Board | 1 | T |
TKGU-09-01-01 | (PT-8A) Power Transformer 1 TKGU-09-01-02 | 2P Table Tap 1 TKGU-09-01-03 | Terminal Block 1
| TKGU-10-01 | Power Switch A’ssy | 1 | |
| TKGU-13-01 | 10P CLK Harness Connector | 1 | T |
| TKGU-13-02 | 2P Counter Harness Connector | i | |
| TKGU-13-03 | 9P CPU Hamess Connector | 1 | T |
| TKGU-13-04 | 3P Coin Harness Connector | 1 | |
| TKGU-13-05 | SP Service Harness Connector | 1 | |
| TKGU-13-06 | 2P Speaker TV Harness | 1 |
Connector
| TKGU-13-07 | 4P-750 Audio Harness | 1 |
Connector
| TKGU-13-10 | 9P Main Switch Harness | 1 |
Connector
| TKGU-13-11 | 17P Junction Harness | 1 |
Connector
| TKGU-13-12 | SOP Flat Cable | 4 | T |
| TKGU-13-13 | 8P Video Harness Connector | 1 | T |
| TKGU-13-14 | 7P SOU Harness Connector | 1 | T |
| TKGU-13-17 | 2P Speaker Harness | 1 |
Connector
| TKGU-13-24 | 15P SOU Harness Connector | 1 | T |
| TKGU-13-25 | SP SOU Harness Connector | 1 | T |
| TKGU-13-28 | 3P Junction Harness | 1 |
Connector
| TKGU-13-29 | 4P Main Switch Harness | 1 |
Connector
| TKGU-13-31 | 6P-1000 Video Harness | 1 |
Connector
| TKGU-13-32 | 2P Counter Junction Harness | 1 |
Connector
| TKGU-13-33 | 3P Coin Junction Harness | 1 |
Connector
| TKGU-20-00 | Video Monitor | 1 | (20—5F) |
| TKGU-23-10 | Micro Switch | 1 | |
| TKGU-23-12 | Switch Button Bracket | 4 | |
| TKGU-23-13 | Control Switch | 1 | T |
| TKGU-23-14 | Blind Plate | 1 | T |
| TKGU-23-16 | Bearing Bracket | 1 | T |
FOB Japan
| No. | Name of Parts | Q’ty| | Remarks | per pe. |
| TKGU-23-17 | Switch Spacer | 4 | T | |
| TKGU-23-19 | Shaft | 1 | T | |
| TKGU-23-20 | Spring Stopper | 1 | T | |
| TKGU-23-21 | Switch Collar | 1 | T | |
| TKGU-23-22 | Lever Spring | 1 | T | |
| TKGU-23-23 | E Ring 4 | 1 | T | |
| TKGU-23-26 | Nut Plate | 4 | ||
| TKGU-23-29 | Control Knob Collar | 1 | T | |
| TKGU-23-31 | Switch Button A’ssy (Blue) | 3 | ||
| TKGU-23-32 | Switch Button A’ssy (Orange) | 1 | ||
| TKGU-23-34 | Pal Nut | 4 | ||
| TKGU-23-50 | 4 Way Control Lever A’ssy | 1 | T | |
| TKGU-23-5 | | 4 Way Guide Plate | 1 L T |
T : Parts which is also used with the Table Model.
- CLK P.C, Board FOB Japan — No. Name of Parts -| Q’ty | Remarks per pe.
| TKG-05-00B| | CLK P.C. Board | i | Complete Set |
| TKG-05-01 | Ic 10101 | 1 | Quadruple OR/NOR Gates |
| TKG-05-02 | Ic 10104 | 4 | Quadruple 2-Input AND Gates |
| TKG-05-03 | IC 10105 | 8 | Triple 2-3-2?-Input OR/NOR Gates |
| TKG-05-04 | IC 10107 | 6 | Triple 2-Input Exclusive-OR/NOR Gates |
| TKG-05-05 | IC 10109 | i | Dual 4-5-Input OR/NOR Gates |
| TKG-05-06 | IC 10116 | 1 | Triple Line Receivers |
| TKG-05-08 | IC 10124 | 6 | Quadruple TTL-to-ECL Translators |
| TKG-05-09 | IC 10125 | 6 | Quadruple ECL-to-TTL Translators |
| TKG-05-10 | Ic 10131 | 2 | Dual Type-D Master-Slave Flip Flops |
| TKG-05-11 | IC 10133 | 4 | Quadruple Latches |
| TKG-05-12 | IC 10135 | 2 | Dual J-K Master-Slave Flip-Flop |
| TKG-05-13 | IC 10136 with radiator fin(L) | 7 | Universal Hexadecimal Counter |
| TKG-05-14 | IC 10174 | 6 | Dual 4-to-! Multiplexers |
| TKG-05-15 | IC SN74LS02 | 1 | Quadruple 2-Input Positive NOR Gate |
| TKG-05-16 | IC SN74LS04 | 1 | Hex Inverter |
| TKG-05-17 | IC SN74LS10 | I | Tri 3-Input NAND Gate |
| TKG-05-18 | IC SN74LS74 | 2 | Dual D-Type Edge-Triggered Flip-Flop |
W/Set and Reset
| TKG-05-19 | IC SN74LS86 | 2 | Quadruple 2-Input Exclusive OR Gate |
| TKG-05-20 | IC SN74LS161/163 | 2 | Synchronous Presettable 4-Bit Counter |
with Clear
| TKG-05-21 | IC SN74LS164 | 6 | 8 Bit Serial-In Parallel-Out Shift Register |
| TKG-05-22B] | IC MB7072 E/N | 4 | 256X4 Bit ECL RAM |
with radiator fin(S)
| TKG-05-23 | Electrolytic Capacitor | 2 | | 100uF 16V | |
| TKG-05-24 | Ceramic Capacitor | 86 | 0.014F 5S0V | |
| TKG-05-26B} | Ceramic Capacitor | 220pF 50V | ||
| TKG-05-27 | Ceramic Capacitor | 10pF 50V | ||
| TKG-05-28 | Ceramic Capacitor | 33pF SOV | ||
| TKG-05-29B) | Resistor | i | 3302 “Wt 5% | |
| TKG-05-30B] | Resistor | 49 | S102 YW + 5% | |
| TKG-05-32B] | Resistor | 6 | 1KQ | “Wt 5% |
| TKG-05-33 B} | Resistor | 2 | 2.2KQ 4W + 5% |
FOB Japan | | No. al Name of Parts Q’ty | Remarks per pe.
| TKG-05-34 B] Resistor | i} | 10K2 YW + 5% | ||
| TKG-05-358| | Resistor | 2 | 1SK® %W + 5% | ||
| TKG-05-36B| | Resistor | 1 | 20KQ YW + S% | |
| TKG-05-37B] | Resistor | 1 | SIKQ %W +t 5% | |
| TKG-05-38 | Transistor | 2 | 28C1215-R/S/T | | |
| TKG-05-39 | Choke Co | | 1 | ST-501339 | |
| TKG-05-40 | Toroidal Transformer | 1 | ST-501340 | ||
| TKG-05-41 | Crystal Oscillator | 1 | ST-501338 | |
| TKG-05-42 | Resistor Array | 14 | [ EXB-P88-511J | | |
| TKG-05-43 | IC SN74 LS123 | 2 | Dual Retriggerable Single shot | |
| TKG-05-44 | Polyester Film Capacitor | 1 | ECQMIH 0,00IpF 102KZ | |
| TKG-05-45 | Polyester Film Capacitor | 1 | ECQMIH 0.022uF 223KZ | |
| TKG-05-46 | Polyester Film Capacitor | 1 | ECQMIH 0.14F | 104KZ |
| TKG-05-47 | Resistor (Carbon) | 1 | 2002 “Wt 5% | |
| TKG-05-48 | Resistor (Carbon) | 2 | 4.7KQ YW st 5% | |
| TKG-05-49 | Resistor (Carbon) | 2 | 22KQ YWst 5% | |
| TKG-05-50 | Variable Resistor | 2 | EVL-VOA00-B54 50KQ 1/3W | | |
- Video P.C. Board FOB fac
| No. | Name of Parts | Q’ty | Remarks | per pe | |
| TKG-06-00B| | Video P.C. Board | 1 | Complete Set | |
| TKG-06-01 | IC SN74LS04 | 1 | Hex Inverter | |
| TKG-06-02 | IC SN74LS08 | 1 | Quadruple 2-Input Positive AND Gate | le: |
| TKG-06-03 | IC SN74LS20 | 2 | Dual 4-Input Positive NAND Gate | |
| TKG-06-04 | IC SN74LS74 | 1 | Dual D-Type Edge-Triggered Flip-Flop |
W/Set and Reset
| TKG-06-05 | IC SN74LS86 | 2 | Quadruple 2-Input Executive OR Gate |
| TKG-06-06 | IC SN74LS139 | 1 | Dual 2-to 4-line Decoder/Demultiplexer |
| TKG-06-07 | IC SN74LS157 | 9 | Quadruple 2-line to I-line Data Selector/ |
Multiplexer
| TKG-06-08 | 1C SN74LS$174 | 1 | Hex D-Type Flip-Flop W/Reset | |
| TKG-06-09 | IC SN74LS194 | 4 | 4-Bit Shift Register | |
| TKG-06-10 | IC SN74LS245 | 2 | Octal 3 State Bus Transceivers | |
| TKG-06-11 | IC SN74L8273 | 2 | Octal D-FFS | |
| TKG-06-12 | IC SN74LS283 | 4 | 4 Bit Binary Full Adder | |
| TKG-06-13 | IC SN74LS367 | 2 | Hex Bus Driver W/3 State Output | |
| TKG-06-14 | IC SN74LS373 | 1 | Octal 3-State D-latches | 7] |
| TKG-06-15 | IC SN74S02 | 1 | Quad 2 Input NOR Gate | |
| TKG-06-16 | IC SN74S86 | 1 | Quad 2 Input EX-OR Gate | |
| TKG-06-17 | IC SN74S157 | 1 | 2 to 1 Data Selectors |
TKG-06-18 | IC SN74S194 8 | 4-Bit Shift Register
| TKG-06-20 | Ic 2114 | 2 | 1024X 4-Bit Static MOS RAM |
| TKG-06-21 | IC 2148-6 | 7 | 1024X 4-Bit Static MOS RAM |
| TKG-06-22 | IC 2716 (390ns) | 4 | 2048X 8 Bit EP ROM |
| TKG-06-23 | IC 2716 (450ns) | 2 | 2048X 8 Bit EP ROM |
| TKG-06-24B} | =1C MB 7052 | 1 | 256X4 Bit Bipolar PPROM |
| TKG-06-25 | Resistor | 7 | 1KQ YW + 5% |
| TKG-06-26 | Electrolytic Capacitor | 1 | 100uF 16V |
| TKG-06-27 | Ceramic Capacitor | 33 | O.1luF SOV |
| TKG-06-28 | IC SN74LS10 | 1 | Tri 3 Input NAND Gate |
| TKG-06-29 | IC SN74LS85 | 2 | 4-Bit Magnitude Comparator |
| TKG-06-30 | IC SN74LS175 | 1 | Quadruple D-FFs |
| TKG-06-31 | IC SN74L8293 | 1 | Binary Counter |
| TKG-06-32 | IC SN74LS393 | 1 | Dual 4-Bit Binary Counters Gate |
| TKG-06-33 | IC SN74S 32 | 1 | Quadruple 2 Input OR |
| TKG-06-34 | IC SN748 175 | 2 | Quadruple D-FFs |
~ 18 -
4, CPU P.C. Board
FOB fom |
| No. | Name of Parts | Q’ty | Remarks | per pc. | ||
| TKG-07-00B] | CPU P.C, Board | ] | Complete Set | ||
| TKG-07-01 | IC 2114 | 6 | 1024X4 Bit Static MOS RAM | J | | |
| TKG-07-04 | IC SN74LS00 | 1 | Quadruple 2-Input Positive NAND Gate | ||
| TKG-07-05 | IC SN74LS02 | 3 | Quadruple 2-Input Positive NOR Gate | ||
| TKG-07-06 | IC SN74LS04 | 7 1 Hex Inverter | |||
| TKG-07-07 | IC SN74LS08 | 2 | Quadruple 2-Input Positive AND Gate | ||
| TKG-07-08 | IC SN74LS32 | I | Quadruple 2-Input Positive OR Gate | |||
| | TKG-07-09 | IC SN74LS74 | 2 | Dual D-Type Edge-Triggered Flip-Flop | | | | |
W/Set and Reset
| TKG-07-10 | IC SN74LS 123 | ] | Dual Retriggerable Single Shot |
| TKG-07-11 | IC SN74LS125 | 1 | Quadruple 3 State Bus Buffers |
| TKG-07-12 | IC SN74LS132 | 1 | Quadruple 2 Input NAND Schmit Triggers} |
| TKG-07-13 | IC SN74LS138 | 6 | 3-to 8-Line Decoder/Demultiplexer |
| TKG-07-14 | IC SN74LS139 | i | Dual 2-to 4-Line Decoder/Demultiplexer |
| TKG.07-15 | IC SN74LS174 | = | Hex D-Type Flip-Flop W/Reset RAM |
| TKG.07-16 | IC SN74LS175 | 2 | Quadruple D-Type Flip-Flop W/Reset |
| TKG-07-17 | IC SN74LS240 | 4 | Octal Buffer/Line Driver/Line Receiver |
W/3-State Output
| TKG-07-18 | IC SN74LS245 | ! | Octal 3-State Bus Transceivers | |||
| TKG-07-19 | IC SN74LS7259 | 2 | 8-Bit Addressable Latches | ||
| TKG-07-20 | IC SN74LS367 | 5 | Hex Bus Driver W/3 State Output | | | 4 |
| TKG.07-21 | IC MB7052 | 2 | Bipolar ROM 256X 4-Bit | ||
| TKG-07-22 | IC Z 80A | ] | 8-Bit Microprocessor | ||
| TKG-07-23 | IC [ 8257-5 | 1 | DMA Controller | ||
| TKG-07-24 | IC 2532 | 4 | 4096X 8-Bit EP ROM | ||
| TKG-07-25 | Electrolytic Capacitor | 1 | leF | 50V | | |
| TKG-07-26 | Electrolytic Capacitor | ] | 47uF | 16V | |
| TKG-07-27 | Electrolytic Capacitor | 3 | 100uF 16V | ||
| TKG-07-28 | Ceramic Capacitor | 3 | O.01luF SOV | |||
| TKG-07-29 | Ceramic Capacitor | 4) | O.luF 50V | ||
| TKG-07-30 | Tantalum Capacitor | 15 | (OnF | 16V | |
| TKG-07-31B] | Resistor Array | 6 | 682 | BW | 5% |
| TKG-07-32B] | Resistor Array | 3 | IKQ | “Wet 5% | |
| TKG-07-33B} | Resistor Array | 1 | 4.7KQ “Wt 5% |
FOB Japan No. Name of Parts L Q’ty | Remarks per pe.
| TKG07 35H Resistor | 2 | 6802. | YW + 5% | ||
| TKG-07-368| | Resistor | 1 | 3602 | YW + 5% | |
| TKG-07-378| | Resistor | 1 | 18KQ. | YW + 5% | . |
| TKG-07-38B} | Resistor | 1 | 30K | “YW + 5% | |
| TKG-07-39 | Resistor | 6 | 68Q | YW + 5% | |
| TKG-07-40 | Resistor | 3 | 1002 | YW + 5% | |
| TKG-07-41 | Resistor | 1 | 2002, | YW + 5% | ||
| TKG-07-42 | Resistor | 4 | 2202 | YW + 5% | |
| TKG-07-43 | Resistor | 7 | 3302 | YW + 5% | |
| TKG-07-445] | Resistor | 8 | 4702 | YW + 5% | , |
| TKG-07-45 | Resistor | 8 | 1KQ. | YW + 5% | |
| TKG-07-468] | Resistor | 1 | 2.2KQ | YW + 5% | |
| TKG-07-47 | Resistor | 1 | 2KaQ | YW + 5% | |
| TKG-07-48 | Resistor | 8 | 4.7KQ | YW + 5% | |
| TKG-07-49 | Resistor | i | 7TS5K2 | YW + 5% | |
| TKG-07-S0 | Resistor | 4 | 10KQ | YW + 5% | |
| TKG-07-S1B] | Resistor | 1 | 68KQ | YW + 5% | |
| TKG-07-52 | Resistor | 2 | 33KQ | YW + 5% | |
| TKG-07-53B| | Resistor | I | 75KQ | YW + 5% | |
| TKG-07-54 | Transistor | 1 | 2801384-R | ||
| TKG-07-55 | Transistor | 2 | 2S8A564-Q/R | ||
| TKG-07-56 | Transistor | 5 | 2SC828-P/Q/R |
l'TKG-07-57 | Diode 1 | ISI88s
| TKG-07-588B] | Diode | 5 | 181953 | |
| TKG-07-598) | Dip Switch | I | DCC-8P | |
| TKG-07-60 | _ Resistor (Carbon) | “TTT | 75Ka | KW = 5% | |
| TKG-07-61 | Resistor (Carbon) | 1 | 9IKQ | WwWe 5% |
| TKG-07-62 | Resistor (Carbon) | 1 | 390KQ | “Ws 5% |
| TKG-07-63 { Resistor (Carbon) | 2 | S60Ka | “Ww 5% | ||
| TKG-07-64 | IC SN74LS86 | 2 | Quadruple 2-Input EX-OR Gate | |
| TKG-07-65 | IC SN74LS164 | 1 | 8-Bit Shift Register | ||
| TKG-07-66 | IC SN74L8373 | 2 | Octal 3-State D-Latches | |
| TKG-07-67 | IC CD4049 UB | 1 | Hex Buffer/Converter | |
| TKG-07-68 | IC CD4066B | 3 | Quadruple Bilateral Switch | |
| TKG-07-69 | Electrolytic Capacitor | 1 | 22uF 16V | |
| TKG-07-70 | Electrolytic Capacitor | J | 33uF 16V | |
| TKG-07-71 | Electrolytic Capacitor | 2 | 3.3uF 16V_— | No Polarity-Type |
| [rxc-07-7 | Electrolytic Capacitor | 1 | 0.47uF 50V No Polarity-Type |
- Power P.C, Board Unit FOB Japan
| No. | Name of Parts | Q’ty| Remarks | per pe. |
TKG-08.00 | Power P.C. Board 1 | Complete Set —]
| TKG-08-01 | Transistor | 4 | 28C2535 OR 28C2335 |
TKG-08-02 | Transistor 4 | 2SA817 :
| TKG-08-03 | Transistor | i | 2SA1015 |
| TKG-08-04 | Fast Recovery Center | 1 | 5GG2C41 |
Tap Diode
| TKG-08-05 | Shot Key Diode | 2 | 15FWJ2C1 OR 30FWJ2C1 | |
| TKG -08-06 | Silicon Rectifier Diode | 1 | 1B4B41 | |
| TKG-08-07 | Silicon Rectifier Diode | 1 | S4VB40 4A 400VW | |
| TKG-08-08 | Hybrid IC | 2 | 3D-1000 | |
| TKG -08-09 | 3 Terminals Regulators | 1 | 78M24 0.SA 24VW | |
| TKG 08-10 | 3 Terminals Regulators | 1 | 7812 1A 12¥W | |
| TKG-08-11 | Thyristors | 1 | 5P4M | |
| TKG -08-12 | Thyristors | 1 | 03P05M | |
| TKG-08-13 | Diode | 4 | 181835 | |
| TKG -08-14 | Diode | 9 | 18954 | |
| TKG-08-15 | Diode | 1 | 1S1588 | |
| TKG-08-16 | Photo Coupler | 1 | PS2002 | |
| TKG-08-17 | Zener Diode | 4 | 1Z27 OR RD27FB | ||
| TKG-08-18 | Zener Diode | 2 | 05Z5.6V (05Z5.6L, RDS.6EB) | |
| TKG-08-19 | Zener Diode | 1 | 05Z13V (OS5Z15L) | |
| TKG-08-20 | Zener Diode | 1 | 05Z27V (RD27EC OR RD30EB) | | |
| TKG-08-21 | Ceramic Capacitor | 3 | DEO707B471K2K 470pF 2KV | |
| TKG-08-22 | Ceramic Capacitor | 2 | DE0707B221K2K 220pF 2KV | |
| TKG-08-23 | Film Capacitor | 7 | MDD2J473M 0.047uF 630VW | |
| TKG-08-24 | Aluminium Electrolytic | 2 | 330uF 200VW 105°C |
Capacitor
| TKG-08-25 | Aluminium Electrolytic | 8 | 2200nF 10V |
Capacitor
| TKG-08-26 | Aluminium Electrolytic | 1 | 470nF 50V |
Capacitor
| TKG-08-27 | Aluminium Electrolytic | 1 | 470nF 25V |
Capacitor
| TKG-08-28 | Aluminium Electrolytic | 1 | 10nF | 16V |
Capacitor
| TKG-08-29 | Aluminium Electrolytic | 13 | 47uF | 16V |
Capacitor
| TKG-08-30 | Aluminium Electrolytic | 1 | 47uF | 35V |
Capacitor
| TKG-08-31 | Aluminium Electrolytic | 5 | 10uF | 50V |
Capacitor L
FOB Japan
| No. | Name of Parts | Q’ty | Remarks | per pe. | ||
| | TKG-08-32 | Film Capacitor | 1 | 0.01uF | 50V | |
| TKG -08-33 4 | Film Capacitor | 2 | 1000pF | 50V | |
| TKG -08-34 | Resistor (Coil Winding) | 1 | 228 | SW + 10% | * |
| TKG -08-35 | Resistor (Carbon) | 3 | 1002 | YWt 5% | |
| TKG -08-36 | Resistor (Carbon) | 5 | 1KQ | YW S% | |
| TKG -08-37 | Resistor (Carbon) | 10 | S19 | YW+ 5% | |
| TKG -08-38 | Resistor (Metal Oxide) | 2 | 1KQ | 2W + 10% | |
| TKG-08-39 | Resistor (Carbon) | 6 | 122 | Wt 5% | |
| TKG-08-40 | Resistor (Carbon) | 1 | 24KQ | %YW+t5% | |
| TKG-08-41 | Resistor (Cement) | 1 | 222 | SW | 10% |
| TKG-08-42 | Resistor (Cement) | 1 | 2202 | 5W+ 10% | |
| TKG-08-43 | Variable Resistor | 2 | 100KQ | GFO6P | T | : | |
| TKG-08-44 | Variable Resistor | 2 | 2KQ | GFO6P | |
| TKG-08-45 | Shunt Resistor | 2 | SMQ +£20% | ||
| TKG-08-46 | SC Coil | 1 | SC-02 | ||
| TKG -08-47 | SF Coil | 2 | 100uH = 8A | ||
| TKG 08-48 | SF Coil | 1 | 800uH | 2A | |
| TKG 08-49 | Auxiliary Power Transformer | 1 | EI-28 Type 3D-1000 | ||
| TKG -08-50 | Oscillator Transformer | 4 | EE-16 Type 3D-1000 | ||
| TKG -08-51 | Oscillator Transformer | 1 | E]-40 Type 3D-0077 | ||
| TKG -08-52 | Oscillator Transformer | 1 | EC-35 Type 3D-0077 | ||
| TKG | Fuse Element | 1 | NR Type 4A |
- SOU P.C. Board
FOB Japan
| No. | Name of Parts | -Q’ty | Remarks | per pe. |
| TKG-15-00B} | SOU P.C. Board | 1 | Complete Set |
(TKG-15-00C) .
| TKG-15-01 | IC SN74LS04 | 1 | Hex Inverter |
| TKG-15-02 | IC SN74LS05 | 1 | Hex Inverter with Open Collector |
| TKG-15-03 | IC SN74LS164 | 3 | 8 Bit Serial-In Parallel-Out Shift Register |
| TKG-15-04 | IC MB3614 | 1 | Low Power Quadruple Operational |
Amplifiers
| TKG-15-05 | IC LM556 | I | Dual Timer | ||
| TKG-15-07 | IC SN74LS86 | 1 | Quadruple 2-Input Exclusive OR Gate | | | | |
| TKG-15-08 | IC SN74LS75 | 2 | Quadruple Bistable Latch | ||
| TKG-15-09 | IC SN74LS161 | 1 | Synchronous Presettable 4-Bit Binary |
. Counter W/Direct Reset
| TKG-15-10 | IC SN74L8367 | 1 | Hex Bus Driver W/3 State Output |
| TKG-1 5-12 | IC CD4049UB | 2 | Hex Buffer/Converter (Inverting) |
| TKG-15-13 | IC DACO8CQ | 1 | 8-Bit Digital-to-Analog Converter |
| TKG-15-15 | IC 2716 | 2 | EP-ROM |
| TKG-15-16 | IC MB8884 | 1 | 8-Bit Microprocessor |
| TKG-15-18 | Crystal Oscillator | 1 | HC-18U-182 6.00MHz |
TKG-15-26 | Transistor 9 | 2S8C1815
| TKG-15-27 | Diode | 10 | ISSS3 | |
| TKG-15-298] | Ceramic Capacitor | “2 | | 22pF | SOV |
| TKG-15-30 | Ceramic Capacitor | 2 | 0.0lnpF | 25V |
| TKG-15-31 | Ceramic Capacitor | 1 | 0.001nzF 25V | |
| TKG-15-32 | Ceramic Capacitor | 15 | 0.068nF 25V | |
| TKG-15-33 | Ceramic Capacitor | 1 | 0.022nF 25V | |
| TKG-15-34 | Electrolytic Capacitor | 2 | 220nF | 16V |
| TKG-15-35 | Electrolytic Capacitor | 7 | lpF | 50V |
| TKG-15-36 | Electrolytic Capacitor | 1 | 3.3uF | 16V |
| TKG-15-37 | Electrolytic Capacitor | 1 | 4.7F | 16V |
| TKG-15-38 | Electrolytic Capacitor | 3 | 10uF | 16V |
| TKG-15-39 | Electrolytic Capacitor | 1 | 22uF | 16V |
| TKG-15-40 | Electrolytic Capacitor | 3 | 3.3uF | 50V | | | |
| TKG-15-41 | Electrolytic Capacitor | 1 | 4.7 pF | 50V |
| TKG-15-42 | Electrolytic Capacitor | 2 | 33uF | 16V |
| TKG-15-43 | Polyester Film Capacitor | 1 | 0.033uF 50V | |
| TKG-15-44 | Polyester Film Capacitor | 2 | 0.047nF SOV |
| FOB Japan.
| No. | | Name of Parts | “| | Q'ty | Remarks | [ | per pe. |
| TKG-15-47 | 24 Pin IC Socket | I | |||
| TKG-15-48 | Resistor (Carbon) | 1 | 120 | YW £ 5% | . |
| TKG-15-49 | Resistor (Carbon) | 2 | 1502 | YW * 5% | |
| TKG-15-50 | Resistor (Carbon) | 1 | 7502 | YW + 5% | ||
| TKG-15-51 | Resistor (Carbon) | 12 | 1KQ | YW + 5% | |
| TKG-15-52 4 Resistor (Carbon) | 2 | 12KQ2 | “Wt 5% | _| | |
| TKG-15-53 | Resistor (Carbon) | 1 | 3.9KQ | “Wt 5% | |
| TKG-15-55 | Resistor (Carbon) | 3 | 4.7KQ | YWt 5% | |
| TKG-15-56 | Resistor (Carbon) | 2 | 5.1K2 | YWt 5% | |
| TKG-15-57 | Resistor (Carbon) | 5 | 5.6K2 | Wt 5% | ! |
| TKG-15-59 | Resistor (Carbon) | 16 | 10KQ | YW t 5% | |
| TKG-1!5-60 | Resistor (Carbon) | 1 | 12KQ | YW + 5% | |
| TKG-15-62 | Resistor (Carbon) | 1 | 18KQ | YW + 5% | |
| TKG-15-63 | Resistor (Carbon) | 1 | 20KQ | YW £ 5% | |
| TKG-15-64 | Resistor (Carbon) | 2 | 27KQ | YW t 5% | |
| TKG-15-65 | Resistor (Carbon) | 2 | 43KQ | YW + 5% | |
| TKG-15-66 | Resistor (Carbon) | T 8 | 47TKQ | YW + 5% | |
| TKG-15-67 | Resistor (Carbon) | 3 | 100KQ_ “Wt 5% | ||
| TKG-15-69 | Resistor (Carbon) | 2 | 2.0KQ | “Wt 5% | |
| | TKG1S-70 | Resistor (Carbon) | 3 | 3.3MQ2 | “Wt 5% |
1 al
| TKG-15-71 | IC SN74LS00 | 1 | Quadruple 2 Input NAND Gate | |
| TKG-15-72 | Transistor | 1 | 28C2320 Rank F | ||
| TKG-15-73 | Polyester Film Capacitor | 1 | 0.068uF 50V+ 20% | |
| TKG-15-74 | Semi Fixed Resistor | 1 | 10KQ2. 1/5W | |
| TKG-15-75 | Tantalum Capacitor | I; 1 | 22uF 16V | | |
~ 24 -