CATHODE RAY TOMES

JoJo's Adventure

JoJo's Venture (Europe 990128) (Capcom, 1998) · Manual · 24 pages · 42 sections · original scan

Page 1

OPERATORS MANUAL

YN WARNING This game is for use in the United States of America and Canada. Sales, export or operation outside of these countries may be constructed as copyright and trademark infringements and is strictly prohibited. Violators are subject to severe penalties and will be prosecuted to the full extent of the law. JJ1300 123098

Page 2

® CAPEOM coin-op, inc. JOJO'S VENTURE™

THANK YOU FOR PURCHASING JOJO'S VENTURE™ WE INVITE YOU TO USE THE FOLLOWING MAILING ADDRESS, TELEPHONE OR FAX NUMBER FOR PARTS OR SERVICE INFORMATION CONCERNING THIS GAME:

CAPCOM® COIN-OP, INC. ATTN: CUSTOMER SERVICE 475 OAKMEAD PARKWAY SUNNYVALE, CA 94086 PHONE: (408) 522-5333 FAX: (408) 522-5331

THE SERIAL NUMBERS OF YOUR GAME ARE LOCATED ON THE PRINTED CIRCUIT BOARDS AS SHOWN BELOW. PLEASE HAVE THESE SERIAL NUMBERS AVAILABLE WHEN CONTACTING US FOR SERVICE INFORMATION.

PLEASE RECORD THE AAMA SERIAL NUMBER HERE:

  • AAMA SERIAL NUMBER:

PLEASE APPLY PRODUCT SERIAL NUMBER STICKER HERE:

[

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 3

® CAP@ON co-op, inc. JOJO'S VENTURE™

TABLE OF CONTENTS

Warranty Information

Caution, Handling [formation ........ccccccccececccessecsecsecsecsecescescsecssceseseeeseessseessceaesacseeserenees

Kit Inspection Full Kit Parts List. Software Kit Parts List...

Kit Installation Preparation .... Installation Marquee ... Control Panel Overlay Cabinet Decals ... Control Panel Comp: PC Boards ... CD-DRIVE CD-ROM

Wiring Control Panel Test/Volume Bracket PC Boards ... CD-DRIVE ..

Game Adjustments Test Menu Accessing the Menu How to Select an Item . Closing the Menu .. Menu Item Descrip: Configuration Menu . System Configuration Game Configuration .

Software Exchange Instruction Exchanging CD-ROM software Rewriting the software & procedure ..

SIMM (Single Inline Memory Module) Installation Instruction Identify the SIMM location Upgrading the hardware Installing SIMM

Appendex Removing SIMM (for reference only) .... SIMM & SIMM Socket (for reference on! Possible Error Messages and Solution

Reterence Information JAMMA Connections Auxiliary Cable Connections . Test Switch wiring chart PCB Connector and Control location Control Panel sample layout g QLOT OUR 09 09 9 0 0

on)

ooe. Ree aan

PeOIIIIA

Inside of back cover Inside of back cover

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. a

Page 4

® CAPCOM" co-op, inc. JOJO'S VENTURE™

LIMITED PRODUCT WARRANTY (APPLIES TO DOMESTIC SALES ONLY)

CAPCOM® COIN-OP, INC. (Seller), warrants only to the initial purchaser of its products, that the items listed below are free from defects in material and workmanship under normal use and service for the warranty periods specified:

A. Printed Circuit Boards: Ninety (90) Days B. Electronic and Mechanical Components: Ninety (90) Days

No other part of Seller's products are warranted.

Warranty periods are effective from the initial date of shipment from seller to its authorized distributors.

Seller's sole liability shall be, at its option, to repair or replace products which are returned to Seller during the warranty periods specified, provided:

A. Seller is notified promptly upon discovery by buyer that stated products are defective;

B. Such products are properly packaged and then returned, prepaid to Seller's designated plant.

This warranty does not apply to any parts damaged during shipment or handling, or due to improper installation, usage or alteration. In no event shall Seller be liable for any anticipated profits, loss of profits, loss of use, incidental or consequential damages or any other losses incurred by the customer in connection with the purchase of a CAPCOM® COIN-OP, INC. product.

WARRANTY DISCLAIMER

EXCEPT AS SPECIFICALLY PROVIDED IN A WRITTEN CONTRACT BETWEEN SELLER AND PURCHASER, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IMPORTANT NOTICE

THIS SHIPMENT HAS BEEN CAREFULLY INSPECTED AND PROPERLY PACKAGED BEFORE LEAVING THE FACTORY. WE CANNOT ASSUME RESPONSIBILITY FOR BREAKAGE THAT MAY OCCUR DURING TRANSPORTATION OF THE GAME. IF THIS GAME IS DAMAGED UPON RECEIPT FROM THE CARRIER, IMMEDIATELY NOTIFY THE CARRIER AND FILE A DAMAGE REPORT.

ii Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 5

® CAP@ON" coin-op, inc. JOJO'S VENTURE™

CAUTION

Please read the following instructions to keep the PC boards in good condition:

@ Do not drop or bump the boards. ¢ Do not spill any liquids on the boards.

DISASSEMBLING THE BOARDS OR REMOVING STICKERS MAY

CAUSE THE TERMINATION OF YOUR REPAIR WARRANTY. ee

PRECAUTIONS

Handling of the Cassette.

  • This cassette is for the exclusive use of CAPCOM'S CP SYSTEM III only. Any other usage may damage the cassette, CD DRIVE and the mother board.
  • Avoid shocks and extreme temperatures. Do not disassemble and keep the connectors in good condition.
  • Make sure the power is OFF when removing or installing the cassette.

Handling of the CD-ROM

  • When the power is ON, the CD-DRIVE must be connected to the mother board and the proper CAPCOM CD-ROM must be inserted in the CD-DRIVE at all times.
  • Be sure that the label on the CD-ROM is facing UP and all four(4) DISK LOCKs are firmly locked in place.
  • This CD-ROM is for exclusive use of CAPCOM'S CP SYSTEM III only. Usage with any other systems such as CD Player may damage both of the CD-ROM and that system/equipment (speakers, headsets, etc.)

LIABILITY

Capcom assumes no liability for profit loss, consequential damage resulting from breakdown of the system, and/or in the areas specified bellow:

  • Acts of God.
  • Improper handling. oo.
  • Unauthorized repair or modification and tampering of the product.
  • Damage caused by other equipment. . Use or install against Capcom's instruction manual and handling.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. iii

Page 6

© @APEOM coin-op, inc. JOJO'S VENTURE™

KIT INSPECTION

CHECK THAT ALL OF THE FOLLOWING PARTS HAVE BEEN SHIPPED WITH YOUR KIT. IF ANY PARTS ARE MISSING, CONTACT YOUR DISTRIBUTOR IMMEDIATELY.

JJ1000 "JOJO'S VENTURE FULL KIT" PARTS LIST

PART NO. DESCRIPTION

351400 PCB ASSY, CP3 SYSTEM, JOJO'S VENTURE JJ4001 SECURITY CARTRIDGE, JOJO'S VENTURE IJ4002 CD-ROM DISK, JOJO'S VENTURE A-00741 _| CD-ROM DRIVE ASSY C-00322 CD-ROM DRIVE DATA CABLE, 50-PIN C-00323 CD-ROM DRIVE POWER CABLE, 4-PIN MT00691 CD-ROM DRIVE MOUNTING BRACKET (1 PIECE TYPE) MT00692 CD-ROM DRIVE MOUNTING BRACKET (2 PIECE TYPE) $C00183-01 SCREW, STS #6X3/16 PPH “AB” ZC $C00184-02 SCREW, MS 4-40X1/4 PPH w/ Washer JJ1110 MARQUEE, “JOJO'S VENTURE” JJ1300 MANUAL, OPERATORS, JOJO'S VENTURE JJ2510 DECAL, JOYSTICK & BUTTON SWITCHES JJ2520-01 DECAL - TOP, GAME PLAY INSTRUCTION, JOJO'S VENTURE JJ2520-02 DECAL - BOTTOM , GAME PLAY INSTRUCTION, JOJO'S VENTURE

GE1200 MONITOR CARD

AW00147 DECAL, CABINET SIDE AW00216 OVERLAY, CONTROL PANEL PL00376 PLEX, MARQUEE, CLEAR, 27.0 X 9.0 X 1/8” 03-0105 CABLE, AUXILIARY GE2030 JOYSTICK, 8 WAY 16-0130 SWITCH, 1-PLAYER START BUTTON (WHITE) 16-0131 SWITCH, 2-PLAYER START BUTTON (WHITE) 16-0133 SWITCH, BUTTON (RED) 16-0134 SWITCH, BUTTON (BLUE) 16-0136 SWITCH, BUTTON (GREEN) 16-0147 SWITCH, BUTTON (YELLOW) alrlele|edelejede

a N

ri[efrlrfele|rmole>e fe |rfedeleleleje

Note: Because of availability, your kit may contain different color of push buttons.

1 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 7

@ CAPCOM coin-op, inc. JOJO'S VENTURE™

JJ1000C "JOJO'S VENTURE SOFTWARE KIT " PARTS LIST

PART NO. DESCRIPTION SIMM MEMORY CPS3 PRG2B 64Mbit (8Mb) SECURITY CARTRIDGE, JOJO'S VENTURE CD-ROM DISK, JOJO'S VENTURE MARQUEE, “JOJO'S VENTURE” DECALL, JOYSTICK & BUTTON SWITCHES JJ2520-01 DECAL, TOP, GAME PLAY INSTRUCTION “JOJO'S VENTURE” JJ2520-02 DECAL BOTTOM, GAME PLAY, INSTRUCTION “JOJO'S VENTURE” JJ1300 | MANUAL, OPERATORS, JOJO'S VENTURE

“JOJO'S VENTURE” REQUIRES MORE PROGRAM MEMORY TO BE INSTALLED.

IMPORTANT

IF YOU PURCHASED SOFTWARE KIT AND CONVERTING THE GAME FROM "STREET FIGHTER III - NEW GENERATION" TO "JOJO'S VENTURE"

INSTALL THE SIMM MEMORY

BEFORE REWRITING THE NEW PROGRAM.

PLEASE READ SIMM INSTALLATION INSTRUCTION IN THIS MANUAL CAREFULLY AND FOLLOW THE PROCEDURE FOR PROPER INSTALLATION. THIS GAME WILL NOT WORK UNLESS THE SIMM MEMORY MODULE IS PROPERLY INSTALLED.

SIMM INSTALLATION IS NOT NECESSARY FOR THE "STREET FIGHTER III 2"? IMPACT - GIANT ATTACK" PC-BOARD.

PLEASE READ SOFTWARE EXCHANGE INSTRUCTION IN THIS MANUAL CAREFULLY AND FOLLOW THE PROCEDURE FOR PROPER INSTALLATION.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 2 |

Page 8

CAP@OM co-op, INC.

KIT INSTALLATION

WARNING:

MAKE SURE ELECTRICAL POWER TO THE GAME IS OFF BEFORE STARTING THE KIT INSTALLATION.

PREPARATION

  • Disconnect and remove the old printed circuit board(s) from the cabinet.
  • Remove or open the control panel, and disconnect and remove the buttons and joystick(s) from the control panel.
  • Remove any covering from the control panel overlay, and then remove the control panel overlay.
  • Determine where any new holes should go. Center punch any needed new holes on the control panel.
  • Cut out the new holes using a 1-3/16" hole saw.
  • If there is an additional Control Panel Cover, figure 1 (such as plastic or lexan) that will be utilized cut any additional holes using the same template. *Cover is not included in the kit.
  • Plug up unused holes with a wood dowel (1-1/8" diameter) and sand any rough edges.

INSTALLATION

MARQUEE INSTALLATION

  • Remove the marquee plexi glass, marquee overlay, and the cabinet graphics.
  • Install the new marquee and replace the plexi glass. Clear plexi glass is included in “full” kit.

CONTROL PANEL OVERLAY INSTALLATION (See Figure 1)

  • The control panel overlay in the kit is oversized to accommodate most control panel sizes. Center the overlay on the control panel, leaving some excess material at the edges.
  • Remove the protective backing from the overlay and press it down on the control panel, keeping it properly aligned. Press it down firmly, smooth out any bubbles, and press it over the edges.
  • Trim any excess from the overlay. Place the drill hole template on top of the overlay, aligning it with the joystick holes. Pierce through the overlay at each control panel hole. Then, cut away overlay material covering the joystick and button holes. Remove the template and clean off the overlay. JOJO'S VENTURE™
  • Peel off the backings of the 6-button and joystick decals, align over the control panel holes, and press in place on the overlay (refer to the drill hole template for proper placement). Using a knife, trim material from the center hole of the joystick decal.
  • Install the control panel cover, figure.1. (If required).

Overlay (Trim to size)

Figure 1: Overlay Installation

CABINET DECAL INSTALLATION

  • Remove monitor glass and install monitor card
  • Peel-off the backing to the instruction decals and place on both the top and bottom of the monitor card. (See Figure 2). Also, apply the cabinet decals to both sides of the cabinet.

MARQUEE OVERLAY

CABINET DECAL INSTRUCTION DECAL - BOTTOM

Figure 2: Cabinet Decal Installation

3 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 9

CAP@OM’ co-op, INC.

RE-ASSEMBLY OF COMPONENTS

  • Notice that there are two white buttons. See figure 3. The WHITE buttons are START buttons. Install the one player button on the top left-hand side of the control panel, and the two players button on the top right-side of the control panel. 1 Player @ @ 22 Prager

Figure 3: Start Buttons

Red Green Blue Red Green Blue

Yellow Buttons —_ 8 xa Noe

Retaining __ Rings WS

Switches — Ag ines Figure 4: Control Panel Buttons and Switches Yellow

  • Install all buttons and retaining rings on the control panel as shown in Figure 4. Install two red buttons to the immediate right of each joystick, install two green buttons to the right of the red ones, and install two blue buttons to the right of the green ones.
  • Install the switches on the buttons as shown in figure 4. Orient the switches so that when a button is pressed, the plastic contact on the switch is depressed.
  • Install the joysticks on the control panel as shown in figure 5.

Figure 5: Joystick Installation JOJO'S VENTURE™

CONTROL PANEL WIRING

NOTE: All switch wires used in this game must be wired to the N.O. (Normally-Open) connection on the switches. Each switch requires a ground wire on the COM. (Common) connector and the appropriate control or switch wire on the N.O. (Normally-Open) connector of the switch.
  • Reconnect the existing JAMMA connectors to the control panel according to the chart in table 1 on page 17.
  • Connect the player | and the player 2 stand buttons to the auxiliary cable harness as shown in figure 6. Make the connections according to the chart in table 2 on page 17.

ToPC Board Connector cna

Figure 6: Auxiliary Cable Harness

TEST SWITCH WIRING

  • Your cabinet may already equipped with test switch. An optional test switch bracket (see Figure 7) is available through your local CAPCOM distributor (part number 03- 0050). When installing, the test switch bracket should be mounted inside the coin door and on top of the cash box for easy access. (See Table 3: for wiring detail)
NOTE: _ only the test switch is used for this game; the volume up/down switches are disabled. Volume adjustments must be made through the volume control knob located on the PC board.

y | »\, Attention

Figure 7: Test switch/Volume Bracket

  • If you are converting a cabinet that is equipped with CAPCOM® Q-SOUND, you may use stereo audio output connect to existing Q-SOUND POWER AMPLIFIER. And set "SOUND MODE" to "External". See "SYSTEM CONFIGURATION" for detail.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 4

Page 10

® (CA'RCOM} COIN-OP, INC. JOJO'S VENTURE ™

PC BOARD INSTALLATION

25. Install the caged PCB to the control panel shelf with supplied wood screws, as shown in figure 8.

Figure 8: PC Board Mounting

@ Wood Screws are not included in Software Kits.

PC BOARD WIRING CONNECTIONS

WARNING

Improper installation of the connector haness (JAMMA / CD-DRIVE / AUX) to the PC board connector may cause damage to the PC board and CD-DRIVE.

  • Attach Power and Data Cable to CD-Drive. Connect other end to SCSI combination connector on the main PCB (Figure 10).
  • Connect the JAMMA harness connector to the edge connector on the PC Board (Figure 10).
  • Attach the auxiliary cable connector to the PC Board. (Figure 10).
  • Ifyou elect to use Q_ Sound Audio Amplifier, connect audio cable to audio output on the PC Board. (Figure 10). CD DRIVE INSTALLATION
  • Install the CD-DRIVE in place you can access easily. Horizontal placement is recommended for stable operation. (See figure 9).

USE ONLY supplied “Pan Head Screw” to mount CD-DRIVE.

MISUSE of screw may cause mechanical damage to the unit. Make sure CD-DRIVE mounted horizontally and leveled.

PPH 4-40x1/4 Qty. 8 Total

Self Tapping Screw #6X3/16 Qty. 4 Total

Picture shown only Right side Bracket & Screws.

Figure 9: CD-DRIVE Mounting

Carefully check connections before applying power.

Check the Cassette seating, press firmly from top and confirm it is not loose.

  • Power-up the game and set the CD-ROM into CD-Drive. (See Figure 11)

CD-Tray Door will not operate without power.

Game will not work without the CD-ROM installed.

CD-ROM INSTALLATION

  • Press Open/Close button to open the CD-Tray.
  • Set the CD-ROM. Secure the CD-ROM with Disc Locks. (See Figure 11)

Make sure it is centered and locked in place.

  • Close the CD-Tray by pressing Open/Close button.
  • After loading CD-ROM, the game is ready to play.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 11

® CAPGOM coin-op. inc. JOJO'S VENTURE™

Figure 10: PC Board and CD-Drive cable connection

Move four Disc Locks toward /f center to secure CD-ROM to prevent break down, / ADJUSTMENT (if required)

  • After the CD-ROM is installed, the game is playable. Adjust the speaker volume by turning the volume control knob clockwise to increase volume, or counterclockwise to decrease volume (see Figure 10)
  • Set all operator adjustable options by CD-ROM Drive pressing the TEST switch. Follow the instructions under the TEST MENU section of this manual. OPEN/CLOSE Switch

Figure 11: CD-ROM Installation

AY CAUTION: Do not remove the CD-ROM from the Drive

during the game. It could result in break down.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 6 |

Page 12

® CAPCON co-op, inc. JOJO'S VENTURE™

TEST MENU

The test menu allows you to test various functions of the game and configure settings used in the game. These items include input devices such as joysticks, buttons and coin mechs, output devices such as monitor, speakers and meters. Through the test menu you can also access the configuration menu, where you can change the settings of the game.

  • ACCESSING THE TEST MENU TEST MENU
>1.INPUT@Fora CAPCOM® cabinet or a converted cabinet with a test
2.OUTPUTswitch:
aemere easMake sure the game is on. Open the coin door, find the location of
5.DOT CROSS HATCHthe test switch, and press “Test”. The screen shown left will
  • GAME DATA an
7.CONFIGURATIONappear on the monitor:
  • MEMORY CHECK
9.GAME REWRITE@Foracabinet without a test switch:
ahetPush “Test switch” on the PC Board.

SELECT 4P UP OR DOWN (See inside of back cover to locate test switch). START = 1PSHOTI

  • HOW TO SELECT AN ITEM Use the PLAYER I JOYSTICK to move the arrow in front of the Player 1 Joystick Player 1 Start desired item and press the PLAYER I SHOT 1 button. To return to the test menu, push the PLAYER I START and ws © PLAYER I SHOT J buttons simultaneously. e __) 3. CLOSING THE TEST MENU

recone To close the test menu, highlight “10. Exit” and push the Player 1 Shot 1 Player 1 Shot 2 vieot PLAYER 1 SHOT I button. (Attack Light) (Attack Middle)

@ The test menu will always appear on the screen: A) After you exit the “7. CONFIGURATION MENU” and B) After the memory is tested from the menu, “8. MEMORY CHECK”.

4, TEST MENU ITEM DESCRIPTIONS

INPUT USED TO TEST ALL THE INPUT SWITCHES, SUCH AS JOYSTICKS AND BUTTONS. THE “0” CHANGES TO A “1” AS THE BUTTON IS PUSHED OR JOYSTICK IS MOVED. CHECK CONNECTIONS AND SWITCHES IN CASE THE “0” DOESN’T CHANGE TO A “1” WHEN DEPRESSED OR MOVED. | OUTPUT USED TO TEST THE COIN METER AND THE COIN LOCK. SOUND SELECT A CODE OF SOUND OR VOICE WITH THE PLAYER I JOYSTICK. PUSH THE PLAYER I PUNCH LIGHT BUTTON TO HEAR THE SOUND OF THE SELECTED CODE. COLOR ‘SHOWS COLOR BARS OF RED, GREEN, BLUE, AND WHITE. ADJUST RGB AND BRIGHTNESS TO OBTAIN THE OPTIMUM COLOR BALANCE AND SOLID BLACK BACKGROUND. DOT CROSS HATCH USED TO TEST THE SCREEN SIZE, FOCUS AND DISTORTION. GAME DATA COIN / SERVICE / FREE PLAY INFORMATION WILL BE DISPLAYED. CONFIGURATION USED TO CHANGE THE GAME PLAY SETTINGS. REFER TO THE CONFIGURATION MENU SECTION. MEMORY CHECK USED TO TEST MEMORY. “OK” APPEARS WHEN EACH BLOCK OF MEMORY PASSES TEST, “NG” APPEARS IN CASE OF MALFUNCTION. IF “NG” APPEARS, REPEAT THE MEMORY TEST AND WAIT FOR THE “OK” MESSAGE. CONTACT YOUR DISTRIBUTOR IF “NG” STILL APPEARS. GAME REWRITE IN CASE THE GAME IS NOT FUNCTIONAL PROPERLY, REWRITE THE DATA TO THE MOTHER BOARD. IF YOU / SHOULD CONTINUE TO HAVE PROBLEMS REWRITING THE PROGRAM, CONTACT YOUR DISTRIBUTOR. /' 1\ *WARNING : THIS FUNCTION WILL TAKE 20 MINUTE. Gis *NEVER TURN THE POWER OFF DURING THE PROCESS. EXIT SELECT THIS ITEM AND PUSH THE PLAYER 1 PUNCH LIGHT BUTTON TO RETURN TO GAME PLAY MODE.

[ 7 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 13

® CANPEON" co-op, inc. JOJO'S VENTURE™

CONFIGURATION MENU

The configuration menu is used to change various game settings such as level of difficulty, credits, sound configuration, etc. These settings are stored in memory on the PCB rather than DIP switches. The configuration menu is divided into 2 sections. In the SYSTEM section, you can change credits, sound, and coin door configurations. In the GAME section, you can change the play difficulty level and duration of the game.

  • CONFIGURATION MENU 1, ACCESSING THE CONFIGURATION MENU

SYSTEM

GAME

DEFAULT

SAVE & EXIT From the TEST MENU, move the arrow to “7, CONFIGURATION” and push the PLAYER 1 SHOT 1 button. The screen below will be displayed. A description of each option is explained in the table below.

SELECT =1P UP OR DOWN START =1PSHOT1

SYSTEM SELECT THIS ITEM TO CHANGE SETTINGS FOR CREDITS, MONITOR FLIP, SOUND AND COIN DOOR CONFIGURATIONS. GAME SELECT THIS ITEM TO CHANGE DIFFICULTY LEVEL, DAMAGE LEVEL, TIME COUNT SPEED, MAXIMUM NUMBER OF ROUNDS AND EVENT TYPE. DEFAULT USE THIS ITEM TO RESTORE CONFIGURATION SETTINGS TO THE ORIGINAL FACTORY VALUES. PRESS THE PLAYER 1 PUNCH LIGHT AND PLAYER 1 PUNCH MEDIUMBUTTONS AT THE SAME TIME TO SELECT THIS OPTION. SAVE & EXIT USE THIS TO SAVE NEW CONFIGURATION SETTINGS AND EXIT TO THE TEST MENU. THE MESSAGE “SAVING NEW CONFIGURATION IN EEPROM” WILL APPEAR WHILE THE NEW SETTINGS ARE BEING SAVED.

DO NOT TURN POWER OFF TO THE GAME UNTIL “SAVING” IS COMPLETE AND THE TEST MENU REAPPEARS.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 8

Page 14

@ CAPCOM" con-or, INC. JOJO'S VENTURE™

SYSTEM CONFIGURATION

7-1. SYSTEM CONFIGURATION CHANGING THE SYSTEM CONFIGURATION SETTINGS

> 1. COIN MODE CHUTE TYPE CONTINUE DEMO SOUND SOUND MODE EXIT

SELECT OPTION =1 MODIFY SETTING 2 COINS 1CREDIT 2 CHUTES SINGLE ON Move the PLAYER I JOYSTICK up or down to highlight the desired

Oh eral option. Once the option is highlighted, move the PLAYER I JOYSTICK

left or right or press the PLAYER J SHOT J button to select.

P UP OR DOWN P LEFT OR RIGHT P SHOT1 OR SHOT2

SYSTEM CONFIGURATION ITEM DESCRIPTIONS

COIN MODE SELECT THE CHARGE PER PLAY. 1.

  • CHUTE TYPE SELECT THE NUMBER OF PLAYER(S) AND COIN CHUTES. 1 CHUTE SINGLE: WITH THIS SETTING, EITHER PLAYER CAN START THE GAME. 2 CHUTES SINGLE: TWO PLAYERS USE ONE COIN CHUTE AND PLAY AT THE SAME TIME. THE PLAYER WHOSE COIN WAS PUT IN FIRST STARTS THE GAME. 2 CHUTES MULTI: TWO PLAYERS USE TWO COIN CHUTES AND PLAY SEPARATELY. THE GAME STARTS FROM THE SAME SIDE AS THE COIN CHUTE WAS USED.
  • CONTINUE USED TO SET THE CONTINUOUS PLAY. 4, DEMO SOUND TURNS ATTRACT SOUNDS ON OR OFF.
  • SOUND MODE SELECT EXTERNAL OR JAMMA FOR USE WITH YOUR CABINET.
NOTE: EXTERNAL SHOULD ONLY BE SELECTED FOR USE WITH CAPCOM® QSOUND CABINETS OR THE CABINET EQUIPPED STEREO POWER AMPLIFIER. TO SAVE THE SETTINGS AND RETURN TO THE CONFIGURATION MENU, HIGHLIGHT THIS ITEM AND PUSH THE PLAYER I START BUTTON.

SYSTEM CONFIGURATION OPTION SETTINGS

1COIN1 COIN1 COIN1 COIN1 COIN
1 CREDIT2 CREDITS3 CREDITS4 CREDITS5 CREDITS
1 COIN1 COIN1 COIN1 COIN2 COINS
6 CREDITS7 CREDITS8 CREDITS9 CREDITS1 CREDIT
3 COINS4. COINS5 COINS6 COINS7 COINS
1 CREDIT1 CREDIT1 CREDIT1 CREDIT1 CREDIT
8 COINS9 COINS2 COINS STARTFREE PLAY

1 CREDIT 1 CREDIT 1 COIN CONTINUE

  • CHUTE TYPE 2 PLAYERS 2 PLAYER:
  • CONTINUE
  • DEMO SOUND [6SOUND MODE |
  • SOUND MODE
NOTE: 1 CHUTE SINGLE 2 CHUTES SI

9 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 15

® GARSON co-op, inc. JOJO'S VENTURE™

7-2. GAME CONFIGURATION

. DIFFICULTY . DAMAGE LEVEL . TIMER SPEED }. 1P MAX ROUND . 2P MAX ROUND . EVENT . REGURATION }. EXIT

SELECT OPTION

MODIFY SETTINGS

GAME CONFIGURATION

CHANGING THE GAME CONFIGURATION SETTINGS

EASY ['2"*"] HARD LOW [2"]HIGH SLOW [2] FAST 3 ROUNDS 3 ROUNDS OFF ON Move the PLAYER 1 JOYSTICK up or down to highlight the desired option. Once the option is highlighted, move the PLAYER 1 JOYSTICK left or right or press the PLAYER 1 SHOT 1 button to select.

P UP OR DOWN =1 = 4P LEFT OR RIGHT =1 IP SHOTIOR SHOT2

GAME CONFIGURATION ITEM DESCRIPTIONS

. DIFFICULTY SETS THE DIFFICULTY LEVEL. . DAMAGE LEVEL SETS THE OFFENSIVE POWER LEVEL . TIMER SPEED SETS THE SPEED OF THE COUNTDOWN. . IP MAX ROUND SETS THE NUMBER OF ROUNDS PER MATCH FOR “VS. CPU”: 1 ROUND: WINNER OF A SINGLE ROUND WINS; 3 ROUNDS: WINNER OF 2 OUT OF 3 ROUNDS WINS; 5 ROUNDS: WINNER OF 3 OUT OF 5 ROUNDS WINS. . 2P MAX ROUND SETS THE NUMBER OF ROUNDS PER MATCH FOR “VS. PLAYER”: 1 ROUND: WINNER OF A SINGLE ROUND WINS; 3 ROUNDS: WINNER OF 2 OUT OF 3 ROUNDS WINS; 5 ROUNDS: WINNER OF 3 OUT OF 5 ROUNDS WINS. TURNS ON EVENT MODE. USEFUL FOR CHAMPIONSHIP TOURNAMENT. OFF: NORMAL SETTING. SETS THE MODE TO NORMAL OPERATION. 1 MATCH: ONLY ONE CREDIT REQUIRED FOR A 2P GAME. A WIN OR A LOSS RESULTS IN GAME OVER. (CONTINUE IS NOT AVAILABLE). . REGURATION ALLOWS YOU TO CHANGE THE SCENES THAT ARE THOUGHT TO BE INAPPROPRIATE TO MORE SOFTER EXPRESSION. IF SET TO "ON" THE COLOR OF THE BLOOD CHANGES FROM RED TO WHITE. . EXIT RETURN TO THE CONFIGURATION MENU.

GAME CONFIGURATION OPTIONS

  • DIFFICULTY
  • DAMAGE LEVEL
  • TIME COUNT
  • 1P MAX ROUND

5.2P MAX ROUND ROUNDS

  • EVENT 1 MATCH OFF
  • REGURATION
NOTE: OFF

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 10

Page 16

® CAPCOM co-op, inc. JOJO'S VENTURE™

SOFTWARE EXCHANGE

INSTRUCTION

New CD-ROM

“CD-ROM Drive

~ Ti "9 OPEN/CLOSE with All the disc locks. Not doing so may Disc Lock ——_ button result in a damage to the CD-ROM/Drive.

@ EXCHANGE THE SOFTWARE

BEFORE EXCHANGING THE SOFTWARE, MAKE SURE YOU INSTALL THE SIMM MODULE FOR "STREET FIGHTER 3 - NEW GENERATION " PC-BOARD. PLEASE REFER “SIMM INSTALLATION INSTRUCTION” IN THIS MANUAL FOR DETAIL.

AFTER THE INSTALLATION OF THE SIMM MEMORY AND THE SECURITY CARTRIDGE THE PCB IS READY TO REWRITE THE PROGRAM.

IF YOU INSTALLED THE SIMM MEMORY THIS TIME. IT IS RECOMMEND THAT YOU COMPLETE THE REWRITE OF THE PROGRAM AND CONFIRM FUNCTIONALITY BEFORE RE-ASSEMBLING THE CASE.

CONNECT PC-BOARD AND CD-ROM DRIVE, YOU ARE NOW READY TO REPLACE CD-ROM DISK WITH SUPPLIED “JOJO'S VENTURE” DISK”.

11 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 17

CAP@OM’ comn-op, INC.

@ REWRITING THE SOFTWARE

A CD-ROM cannot be found.

Please insert a valid CD-ROM.

You have inserted a new CD-ROM.

> Rewrite the game Cancel Please keep in mind That loading anew CD-ROM will erase The prior memory and it will take about XX minutes to rewrite the new game.

Now rewriting. Please wait. . .

NOTE: Please do not turn the power off at this time.

Now loading the game. XX% Approximately XX Min. XX Sec. Before completing the procedure. JOJO'S VENTURE™

  • Turn the power OFF.
  • Make sure the power is OFF. Insert the newly acquired cassette firmly to the place of the old one.

Store the exchanged cassette inside the anti-static plastic bag (Which the new cassette was in) with the exchanged CD-ROM, Manual, Instruction Stickers and marquee.

  • Turn the power ON. In approximately 10 seconds, the following message will appear on the screen.

"A CD-ROM cannot be found. Please insert a valid CD-ROM."

IF THE SYSTEM DOES NOT SHOW THE ABOVE MESSAGES ON THE SCREEN, TURN THE POWER OFF AND CHECK AGAIN TO MAKE SURE SIMM AND CASSETTE HAS BEEN INSTALLED PROPERLY.

  • Press OPEN/CLOSE button to open tray and exchange the existing CD-ROM to new CD-ROM and engage Disc Locks.
  • Press OPEN/CLOSE button to close tray.
  • After installation of CD-ROM, the message will appear.

"You have inserted a new CD-ROM."

Use the Player 1 joystick to move the arrow to your desired item and press 1P SHOT 1 button to rewrite.

(If Cancel is selected, the screen will automatically go back to the CD-ROM setting. -See diagram 3.)

*Upon cancel, insert the prior CD-ROM. Not doing so may cause a damage.

  • The screen shown on the left will appear. It will take approximately 30 minutes* for the rewriting process. After the rewriting process is completed, the game screen will automatically come on.

*The rewrite time may differ due to the size of the software.

DO NOT turn the power OFF during the rewriting process. Doing so may damage the motherboard.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 12

Page 18

e CAPCOM con. OP, INC.

SIMM

CP JOJO'S VENTURE™

(Single Inline Memory Module)

INSTALLATION INSTRUCTION

NOTICE

@ Carefully read the contents of this instruction before installing the SIMM (Single Inline Memory Module) for proper operation.

@ SIMM installation is not necessary for the "STREET FIGHTER III 2"* IMPACT - GIANT ATTACK " PC-Board.

@ Please refer to "JOJO'S Venture" PCB SIMM Layout in this manual for proper SIMM alignment.

CAUTION

This SIMM is for CP-SYSTEM III only. Other usage may damage both the system and the SIMM. Avoid shocks, extreme temperatures, and extreme temperature changes. DO NOT TOUCH THE SIMM CONNECTORS. Doing so may cause damage to the system.

BEFORE INSTALLATION

Make sure the power is OFF before installing and/or removing the SIMM to the board. Make sure your body is free from static. Confirm SIMM #5 already installed 128M bit or 32M bit SIMM. Locate SIMM #2 for installing new 64M bit SIMM as shown below.

SIMM LOCATION [ SCSI Connector + DC Input Connector |

128Mbit SIMM (SIMM 3)

128Mbit SIMM (SIMM 4)

32Mbit SIMM or 128Mbit SIMM (SIMM 5)

(SIMM 6)

(SIMM 7) (Topside view) BACK

64Mbit SIMM. (SIMM 1)

G4Mbit SIMM (SIMM 2)

FRONT

13 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 19

° CAPCOM coin-op, inc. JOJO'S VENTURE™

UPGRADING THE "STREET FIGHTER 3 - NEW GENERATION".

"STREET FIGHTER 3 2ND IMPACT - GIANT ATTACK" PC-BOARD IS NOT NECESSARY TO UPGRADE.

SCREW FOR THE CAGE

screwror 9 UPGRADING EXISTING HARDWARE

CARTRIDGE BRACKET

  • TO REMOVE THE OLD CARTRIDGE, REMOVE THE SCREW, WHICH HOLDS THE CARTRIDGE PROTECTION BRACKET IN PLACE.
  • SAVE THIS SCREW FOR RE-ASSEMBLY. WARRANTY SEAL

AAMA STICKER

@ SS 3. REMOVE THE CARTRIDGE FROM THE

SS MOTHER BOARD.

  • PUTITIN ANTL-STATIC BAG AND STORE IT IN A SAFE PLACE.
  • REMOVE THE WARRANTY STICKER FROM THE METAL CAGE AND THOROUGHLY CLEAN THE AREA.
  • REMOVE THE SCREW, WHICH HOLDS THE TOP COVER AND BASE PLATE. SAVE THIS SCREW FOR RE-ASSEMBLY
  • IF THE REWRITE IS SUCCESSFULLY COMPLETED, YOU CAN PLAY A GAME TO CONFIRM FUNCTIONALITY AND CHANGE CONFIGURATION IF NECESSARY.

PLEASE CONSULT OPERATORS MANUAL FOR DEFAULT SETTING OF THIS GAME.

REMOVE THE SECURITY CARTRIDGE AND RE-ASSEMBLE THE TOP COVER.

. RE-INSTALL CARTRIDGE AND CONFIRM THAT GAME IS UP AND RUNNING.

APPLY THE NEW WARRANTY SEAL TO THE METAL CAGE AND RECORD AAMA SERIAL NUMBER INSIDE OF FRONT PAGE OF THE OPERATORS MANUAL. rr)

IT IS IMPORTANT TO HAVE YOUR AAMA NUMBER AVAILABLE WHEN YOU NEED SUPPORT FROM CAPCOM.

14] Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 20

® CAPCOM" coin-op, inc. JOJO'S VENTURE™

< INSTALLING THE SIMM >

@ Install the 64M bit SIMM. Confirm that SIMM#5 Socket already installed 128M bit (total 8 memory chips) or 32M bit (total 2 memory chips) SIMM.

Install 64M bit SIMM with 4 memory chips into SIMM#2 Socket.

SIMM & SOCKET MEMORY CHIP

24 IMPORTANT

ext ath MOUNTING HOLES (Pin 1 side to left) MOENTING GUIDES There are a few different types of the connectors and some may differ METAL CLIP slightly from the figure shown left.

POLARITY KEY (Pin 1 side to left) CONTACT METAL CLIP

CUT OUT

@ (Pin 1 side to left)

  • When installing SIMM #2 and #5, make sure that pin 1, which should be on the bottom left corner of SIMM, with the cutout coincides with the sockets on the board as shown at the right.

DO NOT INSERT THE SIMM VERTICALLY.

  • Insert the SIMM to the socket at a 45-degree angle.

Do not force the SIMM when inserting. If you have any difficulty inserting the SIMM, gently remove the SIMM from the socket and repeat the procedure again.

  • After making sure the SIMM is properly inserted in the socket, with your finger tips on both vertical edges, gently push the SIMM into a vertical position, so that the "Metal Clips" are securely fastened and plastic mounting guides fit in to the mounting holes on both sides of SIMM.

[is Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 21

® CAPCON* co-op, ne. JOJO'S VENTURE™

@ APPENDEX:

Check both “Mounting Guides” on the SIMM to see if it is all the way through the *Mounting Hole”. If not, remove the SIMM from the socket and follow the procedure again.

<SIMM ALIGNMENT> MOUNTING GUIDE

BACK

FRONT MOUNTING HOLE

MOUNTING GUIDE : (VIEW FROM TOP )

FRONT

<REMOVING THE SIMM>

SIMM How to remove SIMM Memory. In the case

@ you need reseat the SIMM Memory.

  • Open both "Metal Clips" by pushing them outward. Push the SIMM toward you and out of the "Metal Clips".
  • The SIMM should be at a 45-degree angle. If the SIMM still stands vertically, gently press the top of the SIMM to tilt it.
  • Clasp both vertical edges of the SIMM and gently pull at a 45-degree angle to disconnect the SIMM.

Gently pull both edges of the SIMM to disconnect.

POSSIBLE ERROR MESSAGES AND SOLUTION:

“Invalid CD-ROM”: CHECK THAT YOU HAVE REPLACED SECURITY CARTRIDGE.

“Please insert CD-ROM”: MAKE SURE NEW CD-ROM IS IN THE CD-ROM DRIVE.

“The CD-ROM Drive is not properly connected”: MAKE SURE ALL CABLES ARE CONNECTED.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 16

Page 22

) CAPCOM COIN-OP, INC.

Table 1: JAMMA Harness Connections

SOLDER SIDE COMPONENT SIDE JOJO'S VENTURE ™

GND. GND ‘GND. GND, +5V DC +5V DC +5V DC +5V DC NIC. NIC. +12V DC +12V DC ‘KEY ‘KEY

NIC COIN COUNTER 1

COIN LOCK 2.‘COIN LOCK 1

*SPEAKER _() *SPEAKER NIC. NIC.

‘VIDEO GREENd‘VIDEO RED
‘VIDEO SYNC3‘VIDEO BLUE

‘SERVICE (FREE CREDIT) ‘VIDEO GROUND.

NICsé‘DIAGNOSTICS

2PLAYER - COIN 1 PLAYER _- COIN 2 PLAYER - START 1 PLAYER - START 2PLAYER - UP LPLAYER - UP

2 PLAYER - DOWN,yIPLAYER - DOWN
2PLAYER -LEFT21 PLAYER - LEFT

2 PLAYER 1 PLAYER - RIGHT 2PLAYER - ATTACK LIGHT 1 PLAYER _- ATTACK LIGHT

2PLAYER - ATTACK MIDDLE31 PLAYER - ATTACK MIDDLE

2PLAYER ~- ATTACK HEAVY PLAYER - ATTACK HEAVY

NIC NIC

‘GND. ‘GND. ‘GND, ‘GND.

Table 2: Auxiliary Cable (P/N 03-0105) Connections Wiring of the Auxiliary cable requires expanded push buttons/Features as shown in Table 2:

CONNECTOR ODD ROW CONNECTOR EVEN ROW WIRE COLOR

NIC PLAYER 1 STAND PLAYER 2 STAND NIC NIC. NIC. NIC

PLAYER 2 STAND COMMON

Table 3: Test Switch Wiring Chart Wiring of the test bracket requires connections to the main JAMMA harness as s shown in Table 3:

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 23

a CAPCOM coin-op, inc. JOJO'S VENTURE™

REFERENCE INFORMATION

PC BOARD CONNECTIONS AND CONTROLS

Volume Control Knob

Stereo Audio

Connector Cartridge

JAMMA Harness Test Switch Auxiliary Cable

TYPICAL CONTROL PANEL LAYOUTS FOR “JOJO'S VENTURE™”’

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 24

NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

WARNING

Federal law provides severe civil and criminal penalties for the unauthorized reproduction, distribution, or exhibition of copyrighted audiovisual works and video games.

The Federal Bureau of Investigation investigates allegations of criminal copyright infringement.

ARCOM COIN-OP, INC. 475 Oakmead Parkway Sunnyvale, CA 94086 Phone: (408) 774-0500 Fax: (408) 522-5331

Copyright © 1998 CAPCOM ® coin-op, Inc., All Rights Reserved