CATHODE RAY TOMES

Point Blank 3

Point Blank 3 (World, GNN2 Ver.A) (Namco, 2000) · Document · 14 pages · 8 sections · original scan

Page 1

Namco

POINT BLANK 3

KIT

CONNECTIONS

TEST ROUTINE

Issue 1

Page 2

This kit comprises of the following items:

Quantity Baa a aw a a Description Point Blank 3 System 11 PCB Assembly Point Blank 3 Universal Header Decal

Point Blank 3 Universal Instruction Decal

Gun Assembly - Red Gun Assembly - Blue 20way JAE Connector - PS-D4C20 with wires Connection / Test Manual Part No

XPB3-GAMEPCB

40000645

40000646

XPB-GUNRED

XPB-GUNBLUE

69200065

90500122

Page 3

Connectors - Game PCB Assy

5way High Density ‘D’ Connector ideo)

Pin Function 1 Video Red 2 Video Green 3 Video Blue 5 Video Ground 13 Composite Sync Shell Screen

par No

onnector 66000013 (Case 66000001 Terminals 66500008

Bway Amp El Connector Game Control)

Pin Function 1 1P Game 2 2P Game 3 Ground Pin 1 Must be connected to Pin 3)

connector 66000710 Terminals 66500024 15way Amp Mini Plug (Guns)

ao Function +24v +24v +12v +5v +5v Gun 1 Solenoid Gun 1 Trigger Ground Gun 1 Sensor 10 Player 1 Lamp 11 Gun 2 Solenoid 12 Gun 2 Trigger 13 Ground 14 Gun 2 Sensor 15 Player 2 Lamp CHVRAAONA|

Part No Connector 66000668 Terminals 66500014

2way Amp Mini Plug Low Voltage In)

Function +5v +12v +24v Ground +5v +12v +24v Ground Ground +5v 10 +12v 11 Ground 12 +24v Ground CoTSHkR ONE

connector 66000667 Terminals 66500014 20way JAE Connector (Switches)

Pin Function Al Coin Meter B1 Ground A2 Left Speaker + B2 Left Speaker - B5 = -+12v AG Service Sw B6 Test Sw A7 Coin 1 B7 Coin 2 A8 1P Start Sw B8 = 2P Start Sw AQ Right Speaker + BO Right Speaker - A10 Ground B10 Ground

This Connector is Supplied as part of the Kit

Page 4

Test Mode

  • Slide the test switch “ON”. The “Menu Screen” will be displayed on the monitor.
  • Pressing the Player 1 switch will step through the tests and pressing Player 2 switch will select the test.
  • After testing is completed slide the Test switch OFF.

(— >)

COIN OPTIONS ©... eee cece eee eeeeeeeeeeneeeeneeey GAME OPTIONS . SWITCH TEST .... LAMP & BLOWBACK TEST MONITOR TEST SOUND TEST DATA CLEAR GUN INITIALIZE 0... eeeceeceeeeteeeee eee ceeeeeettetteeeeeeel

CHOOSE : P1 START ENTER : P2 START Ne yy,

  • Sets price of play.
  • Sets the game options.
  • Test the switches.
  • Tests the lamps and gun blowback (recoil). (e ) Allows testing and set-up of the monitor.
  • | Adjusts the sound volume.
  • Initializes the stored bookkeeping data.
  • Sets gun aim alignment
Page 5

Coin Options

  • Pressing the Player 1 Start Button will step through the Options.
  • Press the Player 2 Start Button to select the option to be changed.
  • Press the Player 1 Start Button to change the Option data.
  • Press the Player 2 Start Button to store the new data value.
  • Press the Player 1 Start Button to select another option or select EXIT and press the Player 2 Start Button to return to the MENU screen.

( >) COIN OPTIONS START COST: A COINTO START cecscccccssssseeeesssetetscesssetetsnnessstafieceeessee (a)

CONTINUE COST:

  • COIN TO CONTINUE iiccccsceccccceessesteeeeesseettetnnessetefieeeessee (b) COIN CHUTE 1 VALUE:
  • COIN COUNT AS 1 COIN oo..cccescssscccsesssessecensessssetttnnenseefiecneeee (c) COIN CHUTE 2 VALUE:
  • COIN COUNT AS 1 COIN oo..cccssssssccccesssssseeteesssesetttnneeseefiecneeee (a)

FREE PLAY:

No (e) EXIT

CHOOSE: P1 START ENTER : P2 START

Coins required for 1 game. (settable 1 ~ 9.) Coins required to continue another game. (settable 1 ~ 9) Coins added for coin chute 1. (settable 1 ~ 9) Coins added for coin chute 2. (settable 1 ~ 9) Setting of Free Play. If Free Play is on, squeezing the gun trigger will start a game. © OCICS

Note: When using a CashFlow acceptor the price of play is set within the CashFlow. Ensure that options (a) ~ (d) are set at 1.
Page 6

Game Options

1.

2. Pressing the Player 1 Start Button will step through the Options.

Press the Player 2 Start Button to select the option to be changed.

. Press the Player 1 Start Button to change the Option data.

. Press the Player 2 Start Button to store the new data value.

. Press the Player 1 Start Button to select another option or select EXIT and press the Player 2 Start Button to return to the MENU screen.

( >)

GAME OPTIONS

LIFE Better (a)

MUSIC INATTRACT : YES

RANKINGPASSWORD : ON

EXIT

CHOOSE: P1 START ENTER : P2START Ne J

  • Number of Player Lives. (settable 1 ~ 5)
  • Sound played during Attract Mode. (Yes / No)
  • Not used on this game
Page 7

Switch Test

  • Press Player 1 and Player 2 Start Buttons together to return to the MENU screen

(— >) GAME OPTIONS

P1 TRIGGER: OFFP2 TRIGGER: OFF
P1 START: OFFP2 START: OFF

SERVICE : OFF COIN 1 :0

COIN 2 :0

TEST SWITCH : ON

DIP SW1: OFFDIP SW5: OFF
DIP SW2: OFFDIP SW6: OFF
DIP SW3: OFFDIP SW6: OFF

EXIT : P1 & P2 START

OFF changes to ON when the corresponding Switch is operated.

The value of COIN 1 will increase each time credit is established from the CashFlow.

Page 8

Lamp and Blowback Test

  • Select the test required by pressing the Player 1 Start Button.

2 .Press Player 1 Start Button to select another test or select EXIT and press the Player 2 Start Button to return to the MENU screen.

GAME OPTIONS

P1 BLOWBACK

P2 BLOWBACK

P1 START LAMP

P2 START LAMP

EXIT

CHOOSE : P1 START ENTER : P2 START

+ When P1 or P2 Blowback is selected, pressing the P2 Start Button will activate the Blowback (Recoil) on the corresponding gun.

+ When P1 or P2 Start Lamp is selected, pressing the P2 Start Button will cause the corresponding Start Button to blink on and off. Pressing P2 Start Button again will turn the lamp off.

Page 9

Monitor Test

On entering Monitor Test from the Menu screen a Colour Bar is displayed on the monitor. Pressing P1 Start Button will toggle between the Colour Bar screen and a Convergence (crosshatch) screen.

COLOUR BAR Four colour bars are displayed (white, red , green, and Blue) with gradations. Change the number of gradation steps (32,16,8,4,and 2) by pressing the P2 Start Button

Ne ~ COLOUR BAR

mF Colour bar - White

—_—_*_ Colour bar - Red

—_ Colour bar - Green

———_ Colour bar - Blue

NEXT COLOUR TEST : P1 START EXIT : P1&P2 START wy

CONVERGENCE (Crosshatch pattern) A single colour crosshatch pattern is displayed. Change the colour of the crosshatch pattern (White, Red, Green and Blue) by pressing the P2 Start Button

Press P1 and P2 Start Buttons together to return to the MENU screen.

/ CONVERGENCE \

NEXT COLOURTEST —: P1 START \_ exit : P1&P2 START )

Page 10

Sound Test

(a)

(b)

(c)

(d)

  • Select the option to be changed by pressing the Player 1 Start Button.
  • Press the Player 2 Start Button to activate the test.

3 ..Press Player 1 Start Button to select another option or select EXIT and press the Player 2 Start Button to return to the MENU screen.

~ 4 SOUND TEST

SONG (00) ea

SOUND OPP ooeecsccccessssseeeseseseeetteneee

STATUS ©0000 ee ececcceesssseeeenseseeeetennee

LEFT RIGHT ........

EXIT

SONG CHANGE: P2_ START/P1- TRIGGER

CHOOSE : P1 START

ENTER : P2START Ne S

Each number will produce a different sound, for approximatel P2 Start Button is pressed. Song 001 will produce a Stereo Check. When Song Test is selected, pressing P2 Start button will increase the song number and pressing P1 Trigger will decrease the number.

OFF will change to ON will the sound is being played.

During Stereo Check (song 001) Left or Right will be displayed when sound is being produced from the left or right speaker.

Displays which speaker is producing sound in item (c) ly 5 seconds, when the

Page 11

Data Clear

  • Select the option to be changed by pressing the Player 1 Start Button.
  • Press the Player 2 Start Button to activate the reset.

3 ..Press Player 1 Start Button to select another option or select EXIT and press the Player 2 Start Button to return to the MENU screen.

Note: No changes will be stored unless EXIT & SAVE is selected from the MENU Screen.

BACKUP DATA CLEAR

A.D.S.CLEAR

RANKING CLEAR

SET DEFAULTS ALL OPTIONS ow... eee fees (c)

ALL CLEAR

EXIT

Resets all Game Play data.

Resets all Ranking data.

Resets all test options to factory preset.

Resets all items (a), (b), and (c) together.

Page 12

Gun Initialize

This test MUST be carried out after replacing the Game PCB, ROMs, or Gun Assy. Failure to do so may cause incorrect game play.

  • Select GUN INITIALIZE from the test MENU screen. The following screen will be displayed.

(1 GUN INITIALIZE EXIT: P1 & P2 START >»

O

ADJUST GUN SIGHT : P1 START Ne CHANGE GUN : P2 START yy,

  • Aim and fire the gun. A ©) will appear on the screen. If the ©) appears where the gun was aimed, the gun sight is correct. If the © does not appear where the gun was aimed press P1 Start Button. The following screen will be displayed.

(1 GUN INITIALIZE EXIT: P1 & P2 START >

+

AIM AT CENTRE OF THE CROSS \ AND PULL GUN TRIGGER /

  • Aim the gun at the centre of the cross and pull the trigger. The gun sight is set and the display will return to the previous test screen.
Page 13
Note: Ensure that the gun is level and not slanted when aiming at the centre of the cross otherwise the initialization may not be correct.
  • Repeat step 3 to confirm gun alignment.
  • Press P2 Start Button to switch from P1 Gun to P2 Gun.
  • Repeat steps 3 and 4 to initialize Gun 2.
  • Press P1 and P2 Start Switches together to return to the MENU screen.
Page 14

Copies of Namco Game Manuals can be downloaded from our website: www.namco.co.uk under Components Distribution

For all Parts or Technical Support contact:

Brent Spares, Namco House, Units 5-8, Acton Park Estate, The Vale, London. W3 7QE

www.namco.co.uk

For Technical Support, Warranty and

Advance Replacement Parts:- J +44 (0) 20 8324 6120

For Consumable Parts:- J*+44 (0) 20 8324 6102

Fax for both:- fL44 (0) 20 8324 6126