Amazing Maze Installation Instruction
Amazing Maze (Midway, 1976) · Installation · 1 pages · original scan
Page 1
CABLE — MIDCO TELEX NO. 72-1596
MIDWAY MEG. co. PHONE: AREA CODE 312 451-1360 CHICAGO PHONE: 992-2250 MANUFACTURERS OF PALMER ELECTRONIC PRODUCTS 10750 W. GRAND AVENUE e FRANKLIN PARK, ILL. 60131
INSTALLATION INSTRUCTION
Game Board Add On Sound Unit (P.C. 0611-00905)
|. Remove game board jacks and two mounting screws P.C. 0611-00902
- Connect Add on Sound Unit to game board and replace the two mounting screws through both boards. See Figure #1
- Connect 15 pin jack to Add On Sount Unit
- Add 5 wire from new cable to 9 pin jack in proper sequence
Pin #1 YELLOW Pin #6 BLUE-WHITE Pin #7 BROWN-8LACK Pin #2 YELLOW-BLACK Pin #8 WHITE-GREEN
- Solder 3 wires from new cable to transformer terminals in proper sequence.
- WHITE-GREEN to I4V Tap.
- YELLOW to center Tap.
- YELLOW-BLACK to O-Tap
- Mount 8 Ohm speaker and grill. Drill one inch holes if speaker hole is missing.
- Clip on the BLUE-WHITE and BROWN-BLACK wires from new cable to speaker terminals.
- Secure new cable in cabinet.
- Check game sound and set volume control pot.
Andy Ducay Service Manager AD/1b 04-22-77