CATHODE RAY TOMES

Lemans TM-077 Addenda and Spare Parts List

Le Mans (Atari, 1976) · Parts List · 4 pages · 1 sections · original scan

Page 1

ADDENDA

Added to LeMans schematic and printed circuit boards. Piegase make sure that these modifications are done to the printed circuit boards. lst modification: ~ if for audio getting into video.

WA -luf 100v mylar capacitor located at C31 next te the 2200u7

capacitor by edge of board.

2nd modification: to check for inversion of playfield at free play.

  • A 7486 I.C. at location A4 on printed circuit board.
NOTE: 7486 is attached to the top of 2 7474 I.-C. located a A4. Only pin 14 and pin 7 are soldered. The rest ara bent out so jumper wire can be attached.
  • Cut and lift pins 13 of M7. Pin 13 of B4 and C4 and pin 13 of 87.
  • dumper A? pin 30 to B7 pin 13.
  • Jumper F3 pin 9 to A4 pin i (7486
  • Jumper Al pin 8 to A& pin 2 {7486
  • Jumper A4 pin 3 (7485) to A4 pin 4 (7486).
  • Jumper A¥ pin 5 (7486) to nearest pull up resistor.
  • Jumper A4 pin 6 (7486) to and B4 pin 11.
  • Jumper M7 pin 13 to A4 (7485) pin 9.
  • Jumper M2 pin 3 to A4 (7485) pin 10.
  • Jumper M7 pin 13 to A4 (7485) pin 8.
  • Changed R52, a 330 chm resistor to a 550 ohm resistor.
  • Paralleled a 4.7K ohm resistor across R51.
  • Paralleled a IN914 diode across R41. Make sure that the cathode of diode is connacted to thea negative side of C26, a 10uf capacitor. Fs ys

GX/ca

Page 2

SPARE PARTS LIST : .

eee eee

18 37-74192

i i I i ! ' ' i I ' i i ' I I i ietetete bate ed 4-~es ares an ee

Page 3

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 4

A000598-03

A000608-01

A004304-07

A004798

001551-1 LEMANS SPARE PARTS

Steering Assy. (includes 4000607)

Shift Assy.

Start Switch

Foot Pedal Assy.

X - Former

PCB ASSEMBLY A005844 BMRB