CATHODE RAY TOMES

SportsJam

Sports Jam (GDS-0003) (Sega, 2000) · Manual · 31 pages · 29 sections · original scan

Page 1

Naomi GD-Rom System

Universal Kit

Kit Installation Instructions

& Service Manual

Switchable FROM High Resolution 31K

TO Standard (Low) Resolution 15.75K.

2 PLAYER GAME

  • 8-Way Joystick per player
  • Action Buttons per player
  • Start Button per player

for a Horizontal Monitor

Kit come with one (1) JVS/JAMMA Interface Board for two (2) Player Action.

SEGA ENTERPRISES, INC. USA MANUAL NO. 999-1118

Page 2

Warranty

Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.

Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.

Page 3

AC Power Volume/ Speaker/ . . Cable p Kit Overview (RNAi Cele ete

VS/JAMMA Interface Board ff

  • 14 | | } Service Switches

} AD JVS USB et eee a f ~

, _e 112.8 }

7 Power Supply i

= eS niet, <S NAOMI es Port

~<a VGA Output

}

Button Layout Overview (See Templates on Page VII)

8-Ways sw2 \lz .@ 1P 2P Zpyan OO Start Sw.

PLAYER 1 PLAYER 2

Page 4

INSTALLATION INSTRUCTIONS

  • First. Remove all access panels from the game. Locate the original game Logic PCB’s & Power Supply and remove from the Cabinet by first disconnecting all harnesses from the boards. (You need only to splice in the Main Power (110v AC) into the 3-Pin Connector (GRN/WHT/BLK).)
  • Remove all existing game harnesses (we suggest using New Jamma Harnesses (NOT contained in the kit) to ensure reliability).
  • Locate the most convenient and open area of the cabinet to mount the Sports Jam GD-Rom System Asm. Make sure this area is free and clear of all cable harnesses and grounds, cable clamps, etc. (See FIG. 1, inside cover).

Vacuum out or clean bottom of cabinet of dirt & miscellaneous parts (e.g. 4 \dea! screws, loose coins / tokens, etc.).

Remove all exterior decals and repair any cabinet damage. Repaint a! ae . ee . \de cabinet if necessary. Remove the Monitor Plexi or if your game plexi has

Good

Silk-screened artwork, you will need to strip it off.

  • Connect the JAMMA Harnesses to the JVS-JAMMA Interface Boards. Separate the wires from each other (i.e. Control Panel, Video, Speaker, Power Supply). Run the various harnesses to the part of the cabinet they go to ensuring they are dressed properly & secured to the cabinet. (See FIG. 4 Pg. iv). Locate the Volume/Speaker/Coin Meter Cable and connect to your existing Diag. Switch Bracket or use the new one included with the kit. (See FIG. 3, Pg. iii). Note: Jf you are using a VGA Compatible Monitor you can run your VGA Cable directly to the monitor or connect it to your JVS JAMMA Interface for RGB Conversion to your JAMMA Cables.
  • Remove Marquee from cabinet and cut to fit the new Sports Jam Marquee in place.

Sports Jam uses 1 Lever (Joystick) with 2 Multi-Function Switches al (Buttons) for controls and a Start Button per player. REPLACE old good \dea Joysticks & Buttons with the NEW ones supplied in Kit.

  • First remove all Joystick and Button assemblies from the Control Panel. Remove Lexan and Control Panel Overlay. Proceed to clean surface of the Control Panel by removing all adhesive and dirt. Fill in or plug up existing button holes to set up a blank work area for your (1 - 2) templates (See Pages VII, COPY & CUT).
  • Carefully tape template on the Control Panel in configuration of 2 players; using a Center Punch, mark your hole centers. With a 1c” Hole - Saw, proceed to drill out holes for the new Control Panel configuration. Once drilling is complete, clean surface once again eliminating all wood chips and dust.
  • Install the new Control Panel Overlay by carefully peeling off the paper backing and laying down on the panel. Smooth it out, starting in the center and working your way to the edges (removing all of the trapped air pockets). If necessary, cut the edges of the overlay excess and fold under panel.
  • Cut out the button and Joystick Holes. Install Joystick and buttons from kit into the Control Panel and tighten down. Connect all game harness wires to switches and buttons.
Page 5

INSTALLATION INSTRUCTIONS

  • Proceed to place new decals on the sides of the cabinet. Locate a new monitor bezel, if needed, and replace glass, if required (due scratches). Install Instruction Placard to the back of the Monitor Glass.
NOTE: As a precaution, disconnect the JAMMA Harness from the I/O Boards and turn power on. With a Multi-Meter, measure the 5v and adjust if necessary to 5.15v DC. Measure the +12 to ensure the wires and voltages are in the correct position. Turn power off. Plug in the JAMMA Harness once again to the I/O Boards. The Attract Mode should appear on the screen.

Adjust the SIZE, CONTRAST, BRIGHTNESS, and COLORS on the Monitor for optimum appearance. Adjust VERTICAL/HORIZONTAL d ideal Hold to get a stable picture, if required.

Enter DIAGNOSTICS and adjust the Volume Level, test all Buttons & G od idea! Joystick for proper operation & wiring. Adjust Pricing. Coin-Up and 1) test out a game to ensure proper play functions are as they should be.

Page 6

Sega Naomi System Switch

Bracket and Speaker

Installation Diagrams

(Figure 3)

To CN1 of Amplifier Board Pin 1 -—_—_ JAMMA Pin 8

Pin 4 Yellow Wire from Extra Harness (+5v) Pin 5

  • +

a Coin Meter q A x S| ;

Test Service

#JAMMA Pin R Volume -——e JAMMA Pin 1

  • JAMMA Pin 15

GRY/RED From CN2 of 4 Left

Amplifier BoardORG/REDSpeaker

GRY/BLUE

From CN4 of—_—Right
Amplifier BoardORG/BLUESpeaker
Page 7

Sega Naomi System JAMMA Harness Wiring

(JAMMA I/O BD) (Figure 4)

Ground1|/AGround

Ground (2 [e|— Ground

+5v (Not Used)3)Cc+5v (Not Used)
+5v (Not Used)4|D+5v (Not Used)
(Not Used)5)E(Not Used)
+12v (Not Used)6]F+12v (Not Used)
Key7)4HKey
Coin Meter 18]JCoin Meter 2

(Not Used-———_ 9 | K ->—— (Not Used)

(Not Used).10]L(Not Used)
(Not Used):111M(Not Used)
Video Red12]NVideo Green
Video Blue:13]PVideo Sync
Video Ground:14]RService
Test.sls |(Not Used)

Coin 1 fie [+ }-— Coin 2

1P Start17|U2P Start
1P UPrr Pvt2P UP
1P Down¥oWw2P Down
1P LeftFool x |2P Left
41P Right21|Y2P Right
Attack 1P (1P SW1)22|ZAttack 2P (2P SW1)
Grapple 1P (1P SW2)23]aGrapple 2P (2P SW2)
Support 1P (1P SW3).24)bSupport 2P (2P SW3)
(Not Used).25|¢(Not Used)
(Not Used)26|d(Not Used)
Ground27/1leGround
Ground28 | fGround
Page 8

Sega Naomi System Filter Board Information Connector Description etc

Connector Description etc.

Psw2 PSW1___DIPSW1 OR ORS Eco

CN2 CNt : CN4 CNS} Service Test }o jo BEIGE Switch Switch ©oe|- | fafela| = fafsfefa

/ Preamp Level VGA Level Power Connectors Audio Out Video Out

oe L—-— i ~e .

a - “ ~ ™ N

7 N 7 N a N Z

Setting for High \ Resolution 31KHZ \ 1 -4 off

Setting for Standard / Resolution 15KHZ Mi 1 on 2-4 off. f

Page 9

Cut Copied Page Only

TAT eb

LEVER 4 fay

1%" 2

(JOYSTICK)

. RD

Typical Hole Saw BUTTON (Switch 2) (Switch 1)

+ Diameter = 11%” “Swi ”

» BUTTON LAYOUT

{7 CONFIGURATION

m PROPER ERGONOMIC PLACEMENT of your Control Panel Buttons. Below are Actual Size Templates for

BUTTS 33 . Sw2.

Typical Hole Saw BUTTON (Switch 2

Diameter = 11%” «“ SWi1 ”

1%” @ Co) LEVER 4 e's

112” @ (Copy this page to cut templates at dotted lines.)

eT l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l I l l l

l l l

Page 10

THIS PAGE INTENTIONALLY BLANK

Page 11

TABLE OF CONTENTS

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

  • HANDLING PRECAUTIONS 1
  • SPECIFICATIONS ....... 2
  • CONTENTS OF GAME 3
  • TEST MODE 7 A.SYSTEM MEN B.GAME TEST MODE a.INPUT TEST Switch input test is performed. b.GAME ASSIGNMENTS Various settings such as game difficulty, etc. can be set. c.BOOKKEEPING Allows for checking data such as the number of coins inserted, operation time, game time, etc. d.BACKUP DATA CLEAR Clears the contents of BOOKKEEPING
  • GAME BOARD
  • SOFT KIT

Use of this product is unlikely to cause physical injuries or damages to property. However, where special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in this manual.

Indicates that mishandling the product by disregarding this display can cause the product's intrinsic performance not to be obtained, resulting in malfunctioning.

IMPORTANT

@ When using the cabinet that shares the coin chute between 1P and 2P (such as the NAOMI CABINET, BLAST CITY, etc.), change the setting of the COIN CHUTE TYPE item in the COIN

IMPORTANT ASSIGNMENTS screen, from INDIVIDUAL to COMMON. Using these cabinets with the setting of INDIVIDUAL disables to play from the 2P side. For more information about the COIN ASSIGNMENTS screen, see the Naomi Service Manual. When having connected the power for the first time, open the SYSTEM MENU - GAME TEST MODE - INPUT TEST screen and test the input devices; thereby make sure that they can function normally. This game is available only with the NAOMI GD-ROM system. It is not available with other hardware. This game cannot support the competitor connection kit of the NAOMI CABINET. When connecting the wire to the control panel, therefore, connect it only to a single I/O board.
Page 12
  • HANDLING PRECAUTIONS

f) @ To prevent electric shock or IC Board malfunctioning, be sure to

turn off the power for the cabinet when installing or removing the IC Board.

WARNING! Extraneous matter such as dust on the IC Board can cause the IC Board to generate heat and result in a fire due to short circuit, etc. Ensure the IC Board surfaces are always kept clean. Use NAOMI for the cabinets compatible with JVS. Using NAOMI for the cabinet other than those compatible with JVS can cause generation of heat and a fire.

Be sure to connect the IC Board and connectors completely. Insufficient insertion can damage IC Board, etc.

IMPORTANT For the IC Board circuit inspection, only the use of Logic Tester is

permitted. The use of ordinary testers is not permitted as these can damage the IC Board. Do not subject the IC Board to static electricity when installing the IC Board in the cabinet or when connecting wire harness connectors to the IC Board. When soldering buttons, etc. to the wire harnesses, be sure to remove the wire harnesses from the IC Board so as not to subject the IC Board to heat. Using NAOMI without the Shield Case can cause electric wave trouble. Be sure to use NAOMI together with the accessory Shield Case. The monitor frequency corresponding to NAOMI is 15kHz or 31kHz. NAOMI can not be used for the cabinet incorporating a monitor or projector not corresponding to 15kHz or 31kHz.

@ Concerning the display of JAMMA VIDEO STANDARD: JAMMA VIDEO STANDARD adopted by NAOMI is referred to as JVS. As against this Standard, the conventional JAMMA STANDARD which employs 56P Edge Connectors adopted by ST-V, etc. is displayed as Old JAMMA STANDARD. The specific Manual attached to each game sometimes displays JVS as JV STANDARD, New JAMMA STANDARD, or JAMMA 2 STANDARD AGAINST OLD JAMMA STANDARD as JAMMA STANDARD, JS, ete.

@ The contents herein described are subject to change without notice.

Page 13
  • SPECIFICATIONS

Q)ON-SCREEN DISPLAY

Monitor Position

Synch: s F C HORIZONTAL | issue

(@ CONTROL PANEL

BWAYS 8WAYS nla nla o@

WO 4 START SW 4

PLAYER 1 PLAYER 2 @)Minimum DIMM Memory Capacity

256 MB

Page 14
  • HOW TO PLAY THE GAME

Introduction to the Game

A player plays the most popular sports in the world (8 events and 12 games). The player aims to take first money and thereby to be designated as a KING OF SPORTS.

Stages toward a KING OF SPORTS Following the 3 stages, a player ventures to play the events, one each on a stage. Then the player moves to a final stage and chooses the best event out of the finished 3 events so as to be designated a KING OF SPORTS.

First Stage Selects and plays an event.

Second Stage Selects and plays an event. |<

fe} Third Stage Selects and plays an event. <a Selects an event out of the finished 3 events and plays it. Final Stage

Aims to be designated as a KING OF SPORTS. <—_—_ (KING OF SPORTS)

Page 15

Games and Operation (1)

nese au “BASKET ALL

The player tries to shoot, within a limited ~ time, from the 5 positions in the threepoint field. The player tries to hit a | home run into an outfield stands.

The two players try to compete for a touchdown. The player tries to tee off the ball nearest to the pin.

The player tries to score a goal with a TENNIS.

The player tries to receive the ball back

The two players try to rally. long shoot. into the target in the displayed court.

1 Reacive OFF OEE TEER GEE

aa The player tries to

Uses & score a goal with a direct shoot.

Page 16

Games and Operation (2)

FA

The player tries to putt. The player tries to sprint around the track two times for the shortest time.

D872

emia

The player, as a goalie, tries to save the shots as many as possible. The player tries to score a field goal. 9.x

wp) Special Command A special command is available to enable a player to select all the games at the beginning (not one stage by one stage). To activate the special command: When a shutter is going to open after the coins have been inserted, move the control stick upward, downward, rightward, and leftward, and then press the SW1 and SW2 switches - all in this order.

Page 17

Instructions on the Screen

If When in a 1-person play: The game is over if the player fails to satisfy the clearing condition within a specified time interval.

Indicates a remaining time.

Indicates a present stage.

Indicates a clearing condition.

Indicates a total of prize money. Indicates points of the game.

If When in a 2-person play: The player who has won the two matches is a winner. If both the players have equal scores, the result of the game is decided with a sudden death rule. (If the result can not be decided even with a sudden death rule, the game is over.)

Indicates a Indicates the Indicates a Indicates a first player. remaining time. number of wins. _second player.

Indicates a present stage.

SHOOT!

Page 18
  • TEST MODE

A. SYSTEM MENU

When settings are changed in SYSTEM ASSIGNMENTS, COIN ASSIGNMENTS, and GAME ASSIGNMENTS of GAME TEST MODE, be sure to exit from the test mode of SYSTEM MENU screen. The contents

IMPORTANT of setting changes are stored in the IC on the BOARD when exiting from the Test Mode. If the power is turned off in the Test Mode (before exiting), the contents of setting changes are ineffective. In this case, the settings remain unchanged.

This test mode mainly allows the IC Board to be checked for accurate functioning, monitor color to be adjusted as well as COIN ASSIGNMENTS and GAME ASSIGNMENTS to be adjusted.

  • Connect the power, and press the test button. Then the following SYSTEM MENU screen appears.

n the SYSTEM ASSIGNMENTS, CABINET TYPE is set to 2 PLAYER(S), eys TEM MENU “MONITOR TYPE is set to HORIZONTAL, “and SERVICE TYPE is set to COMMON.

ive eee COIN ASSIGNMENTS initial settings as follows:

SOUND TEST COIN CHUTE TYPE: COMMON CRT. TEST 4COIN/CREDTI SETTING: #1 SYSTEM ASSIGNMENTS COIN CHUTE #1 (#2): | COIN 1 CREDIT COIN ASSIGNMENTS ~——— BOOKKEEPING

SELECT WITH SERVICE BUTTOh

PRESS TEST BUTTON iS) SEQUENCE SETTING of COIN ASSIGNMENTS functions as follows: SEQUENCE 1: Number of credits required for game start er Goe secant _ (initial value = 1 CREDIT).

* SEQUENCE 2: Number of credits required for CONTINUE

(initial value = 1 CREDIT) DIMM BOARD TEST ; GAME Tee MODE “SEQUENCE 3 ~ 8: NOT USED. [XXXXXXXXX ] MEANING OF DISPLAY IN BOOKKEEPING 2/2 > EXIT 1 (P2) SEQ 1: Play frequency of Player 1 (Player 2) P1 (P2) SEQ 2: Frequency of CONTINUE by Player 1 (Player 2). “P1 (P2) SEQ 3 ~ 8: NOT USED.

AND

  • Press the service button to move the -> mark to any desired item, and press the test button.
  • Press the service button to move the -> mark to GAME TEST MODE item, and press the test button. Then the GAME TEST MENU screen appears that enables to test the items specific to this game. For the details, see the following pages.
  • After testing, select the EXIT and press the test button. The game advertising screen reappears.
NOTE: For more information about the SYSTEM MENU screen, see the GD-ROM Service Manual (No.: 420-6620-01).
Page 19

B. GAME TEST MODE

Press the service button to move the -> mark to any desired item, and press the test button. Then the corresponding screen appears.

GAME TEST MENU

INPUT TEST GAME ASSIGNMENTS BOOKKEEPING BACKUP DATA CLEAR

-> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

GAME TEST MENU Screen

After testing, select the EXIT and press the test button. Then the SYSTEM MENU screen reappears.

Page 20

a. INPUT TEST

This screen tests the input devices. Make sure that each of the input devices can change its indication from OFF to ON as you operate the corresponding device.

INPUT TEST

START:OFFSTARTI: OFF

SW_SHOT10 :OFF SW_SHOT20 : OFF SW_SHOTI1 :OFF SW_SHOT21 : OFF

SW_UP1:OFFSW_UP2: OFF

SW_DOWNI : OFF SW_DOWN2 : OFF

SW_LEFT1:OFFSW_LEFT2: OFF

SW_RIGHT1 :OFF SW_RIGHT2 : OFF

TEST-SW=: OFFSERVICE-SW : OFF

PRESS SERVICE BUTTON AND TEST BUTTON TO EXIT

INPUT TEST Screen

After testing, press the test button and the service button simultaneously. Then the GAME TEST MENU screen reappears.

CONTROL PANEL

Page 21

b. GAME ASSIGNMENTS,

This screen sets the game difficulty level. Press the service button to move the -> mark to the GAME DIFFICULTY item, and press the test button. Then the GAME DIFFICULTY item can change its indication between VERY EASY, EASY, MEDIUM EASY, NORMAL, BIT HARD, MEDIUM HARD, HARD, and VERY HARD.

GAME ASSIGNMENTS,

GAME DIFFICULTY NORMAL

-> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

GAME ASSIGNMENTS Screen

After setting, select the EXIT and press the test button. Then the GAME TEST MENU screen reappears.

Page 22

c. BOOKKEEPING

The following three BOOKKEEPING screens (PAGE 1/3, 2/3, and 3/3) display the operating data.

BOOKKEEPING GAME REPORT PAGE1/3

NUMBER OF GAMES 0 1P GAMES 0 2P GAMES 0 NUMBER OF CONTINUE 0 1P GAMES 0 2P GAMES 0

PLAY TIME 0D 0H 0M 0S AVERAGE PLAY TIME 0D 0H 0M 0S LONGEST PLAY TIME 0D 0H 0M 0S SHORTEST PLAY TIME 0D 0H 0M 0S

PRESS TEST BUTTON TO CONTINUE

BOOKKEEPING Screen (1/3)

Press the test button to migrate to the BOOKKEEPING (PAGE 2/3) screen.

This screen (TIME HISTOGRAM) shows the number of the games per every playing period. Use the data to set a difficulty level.

BOOKKEEPING TIME HISTOGRAM PAGE 2/3 OMOO0S ~ 0M29S 0M30S ~ 0M59S 1MO0S ~ 1M29S 1M30S ~ 1M59S 2MO00S ~ 2M29S 2M30S ~ 2M59S 3MO00S ~ 3M29S 3M30S ~ 3M59S 4MO00S ~ 4M29S 4M30S ~ 4M59S 5MO0S ~ 5M29S 5M30S ~ 5M59S 6MO0S ~ 6M29S 6M30S ~ 6M59S 7MO0S ~ 7M29S 7M30S ~ 7M59S 8MO0S ~ 8M29S 8M30S ~ 8M59S 9MO0S ~ 9M29S 9M30S ~ 9M59S OVER 10M00S PRESS TEST BUTTON TO CONTINUE eeocesoooosccoooSoSoSoSooocS

BOOKKEEPING Screen (2/3)

Press the test button to migrate to the BOOKKEEPING (PAGE 3/3) screen.

Page 23

The screen (CALLED GAMES) shows the number of games per every game.

BOOKKEEPING CALLED GAMES _ PAGE3/3

BASKET AMFB2 GOLF GOLF2 BASEBALL AMFB SOCCER SOCCER2 BICYCLE TENNIS HOCKEY HOCKEY2 cooeooeosseeseo

PRESS TEST BUTTON TO EXIT

BOOKKEEPING Screen (3/3)

Press the test button. Then the GAME TEST MENU screen reappears.

Page 24

d. BACKUP DATA CLEAR

This screen enables to clear the bookkeeping data and the ranking data.

NOTES:

  • This BACKUP DATA CLEAR screen cannot clear the game difficulty level setting of the GAME ASSIGNMENT screen.
  • This BACKUP DATA CLEAR screen cannot clear the coin and credit data. To clear the coin and credit data, select and execute the BACKUP DATA CLEAR item in the SYSTEM MENU screen.

BACKUP DATA CLEAR

YES(CLEAR) -> NO (CANCEL)

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

BACKUP DATA CLEAR Screen

To clear the backup data: Press the service button to move the -> mark to the YES (CLEAR) item, and press the test button. When the system completes clearing, a 'COMPLETED' message appears on the screen. Press the test button again to return to the GAME TEST MENU screen. Not to clear the backup data: Press the service button to move the -> mark to the NO (CANCEL) item, and press the test button. The system does not execute clearing, but returns to the GAME TEST MENU screen.

Page 25
  • GAME BOARD

Do not expose the Game Board so as to avoid causing an accident or malfunctioning. Static electricity discharge can damage electronic parts on the IC Board. Before starting work by opening the Shield Case Lid, be sure to touch grounded metallic surfaces to discharge physically charged static electricity. When replacing the Game Board, refer to the CVT Manual and Instruction Manual.

CAUTION!

PART NO. DESCRIPTION

@+ @ 840-0051D-01 ASSY CASE NAO PCI DIMM BD USA 840-0051D-02 ASSY CASE NAO PCI DIMM BD EXP 840-0051D-03 ASSY CASE NAO PCI DIMM BD KOR 840-0051D-04 ASSY CASE NAO PCI DIMM BD AUS

® 840-0001A-01 ASSY CASE NAOMI MAIN BD USA 840-0001 A-02 ASSY CASE NAOMI MAIN BD EXP 840-0001A-03 ASSY CASE NAOMI MAIN BD KOR 840-0001A-04 ASSY CASE NAOMI MAIN BD AUS

840-0001F ASSY CASE NAO DIMM BD COM

610-0617 GD-ROM DRIVE UNIT NAOMI

Page 26

422-00053B (STICKER 840-0053B)

Attached place

PART NO. DESCRIPTION

840-0001F ASSY CASE NAO DIMM BD COM

KEY CHIP

840-0053B DIMM BD NAO SP JAM

Page 27
  • SOFT KIT

Handling the GD-ROM Disk @ Do not contaminate the disks with your , fingerprints or dust particles. Contaminated

IMPORTANT disks may lower audio and video quality. @ When cleaning the disks, do not use volatile chemicals (benzine, thinner, etc.), cleaning sprays, and antistatic agents. Do not use cracked, warped, or damaged Use clean cloth to wipe disks. the disk gently and into a Do not attach papers or seals onto the disks; _ radial direction. do not scratch the disks. Do not use the disks with a sign of peeled seals, tapes, etc. Observing these instructions, do not insert such a non-usable disk into the GD-ROM drive. Otherwise the inserted disk can not be ejected. When cleaning a heavily contaminated disk, use clean cloth that has been soaked in water and squeezed. Then remove moisture with dry cloth. @ When holding a disk, be careful not to contaminate it with your fingerprints.

How to Hold a Disk

With both hands: With one hand: Put your thumbs and forefingers of both _Insert your forefinger into a hands on the disk's 4 circumference tips. _ central hole and at the same time put your thumb and middle finger on the disk's 2 circumference tips.

How to Handle the Key Chip @ The key chip is a precision device. Handle it carefully because it may be damaged by heat, shock, and static electricity. @ Use the key chip with the GD-ROM disk of the corresponding game that has been shipped together with the key chip.

Page 28

PART NO. DESCRIPTION

(+ @ + @Or® 610-0630-0003 GD SOFT KIT SP JAM ENG

GDS-0003 * NAOMI GDROM SP JAM

KEY CHIP

420-6621-0003E SERVICE MANUAL SP JAM ENG. GC|CO 253-5507 DISK CASE WITH IC HOLDER

Page 29

uw

ui

AF3c;DiEFiG

“ - 80 we ee 838-13616 120 Vac Input Zs0 pe et ‘AUDIO POWER AMP 2CH

[Extra] [GD ROM DRIVE] € R2ae 2 8 E 123 3

T

Z

as 35

2lalels!hy54
BekcooBe9026
33238323 8s3g

pace COIN COUNTER to extra 23 Yellow Wire 23 SW REGU FOR JVS

acizav IN >

2} acizov iw

JAMMA CONNECTIONS USED ARE: To PIN 8 ~ of Jamma

\

° VIDEO OUT ® SWITCH INPUTS, ® SWITCH GROUND RETURNS ° COIN COUNTER OUTPUT

NOTE: THERE ARE TO BE NO CONNECTIONS MADE TO THE JAMMA INTERFACE OTHER THAN ‘THE ABOVE FOREMENTIONED. 838-13683-91 fay a

fe) N\

600-6743-050

“ | Fit MINE D-SUB 59) MIN 600-7141-050

  • OUT 07a

DoSuBisP

REA

NAOMI KIT UNIVERSAL WIRING DIAGRAM (1/1)

T 5 G rr

Page 30

VISIT OUR WEBSITE!

CCT CS >> SGA ervicle.com

Peta G) http://www seuservice.com/

Search criteria:

SERVICE

  • Dari's Office *" Whet's New
  • Game Manuais *" Bultetins

seu ma g liste Sega Enterprises Inc. USA Service Department phone 415.701.6580 fax 415.701.6594 { A Ustaffl[Darl's off [technical service][customer senice][corporate info][plugins][Non-framed page]

A total of BMS 1 people have accessed this page since June Sth.

Ifyou have any questions or comments about this Home Page please E-Mail to

darl davidson@seu sega. com OR dave. cantrelle@seu sega com

Sega Enterprise iInc., USA. All rights reserved

You will need the following items to view this page in its entirety

Page 31

SEGA ENTERPRISES, INC. (USA)

45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax