Led Storm Manual
Mad Gear (US) (Capcom, 1989) · Manual · 20 pages · 21 sections · original scan
MA
NUAL
THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.
CAPCOM, USA INC.
INVITES YOU TO USE
OUR SERVICE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER CAPCOM GAME YOU NOW HAVE ON LOCATION. PLEASE HAVE GAME SERIAL NUMBERS AND CABINET NUMBERS READY.
CALL US FOR PROMPT, COURTEOUS
ANSWERS TO YOUR PROBLEMS.
irect Number (408) 727-0400
Before You Get Started...Stop!
Does your new game package include all listed parts? (Is it complete?)
. Is the game you have chosen to transform able to supply all the required voltages for the new game?
Is the monitor configuration compatible? In most games it is rather difficult to change the monitor from a vertical mount to a horizontal mount. We recommend you choose a game cabinet with the same mount as your new game requires.
. Do you have the necessary tools? (See the recommended tool list)
WARRANTY, REPAIR AND RETURN POLICY
- *90 DAY FULL PARTS WARRANTY.
- *90 DAY FULL ELECTRONICS WARRANTY (SEE RMA BELOW).
- MINIMUM $40.00 SERVICE CHARGE FOR ALL NON-WARRANTY REPAIRS OR RETURNS.
- ANY UNAUTHORIZED NON-FACTORY REPAIR OR ATTEMPTED REPAIR VOIDS WARRANTY.
(‘ALL WARRANTY PERIODS BEGIN ON THE DATE OF PURCHASE FROM CAPCOM USA)
RETURN MATERIAL AUTHORIZATIONS — (RMA)
- ALL RETURNED MERCHANDISE MUST HAVE AN RMA NUMBER CLEARLY VISI- BLE ON THE OUTSIDE OF THE PACKAGE.
- ALL RMA NUMBERS MUST BE OBTAINED FROM CAPCOM USA BY AN AUTHORIZED CAPCOM USA DISTRIBUTOR. (PLEASE HAVE CAPCOM USA SERIAL NUMBER AVAILABLE WHEN CALLING FOR AN RMA #).
- ALL PC BOARDS RETURNED TO CAPCOM USA WITHOUT AN RMA NUMBER WILL NOT BE ACCEPTED.
- CAPCOM USA WILL SHIP ADVANCE REPLACEMENT BOARDS TO DISTRIBUTORS OR AT DISTRIBUTORS’ REQUEST, DROP-SHIP BOARDS DIRECT TO THE OPERATOR.
- ADVANCE REPLACEMENT BOARDS WILL BE BILLED TO THE DISTRIBUTOR UN- TIL RECEIPT OF A RETURNED BOARD BY CAPCOM USA AT WHICH TIME A CREDIT WILL BE ISSUED.
- ALL REPAIRS AND/OR REPLACEMENTS WILL BE SHIPPED BY CAPCOM USA WITHIN 24 HOURS OF RECEIPT OR REQUEST. (SUBJECT TO AVAILABILITY OF BOARDS).
- FOR ANY CAPCOM USA PRODUCT PURCHASED AFTER 11/1/87, A CAPCOM USA WARRANTY CARD MUST BE ON FILE FOR EACH BOARD TO FACILITATE REPAIR & RETURN.
WARRANTY REPAIRS:
During the initial 90-day warranty, customers who’s accounts are current are eligible for an Advance Exchange PCB. When calling for an Advance Exchange PCB, please supply a complete description of the item needed, game serial number for warranty verification, RO. number, and shipping information. You will be issued an RMA number for the return of the defective PCB.
Terms for Advance Exchanges are NET 15. If the defective PCB is not returned within 30 days, no additional Advance Exchanges will be issued until the offending PCB is returned, or the invoice is paid in full. If the PCB is not returned until after 90 days, the warranty will be voided, and the customer will be liable for all repair charges. It is our goal to constantly improve and better our services to you. Your cooperation with the above stated policies will help us greatly to reach this goal. If you have any comments or questions, please telephone our Customer Service department. We will make every attempt to tailor our services accordingly.
Installing and Servicing Your
New Game Package
Table of Contents
Power and Monitor Requirements
New Game Package Contents
Recommended Tools and Supplies
Dip Switch Tables
Installation Procedures
Control Panel Positioning
Main Harness Connections
Warranty Registration Card
POWER REQUIREMENTS MONITOR REQUIREMENTS
Vertical Mount Raster Scan Negative Composite Sync
NEW GAME PACKAGE CONTENTS
1 Main Printed Circuit Board (PCB) 1 Control Panel Overlay 1 Set Legs, Bolts, & Spacers 1 Plex Control Cover 1 Connecting Wire Harness 1 Set Side Graphics 1 Eight-Way Joystick 1 Monitor Card 4 Player Button Assemblies 1 Service and Installation Manual 1 Marquee
Recommended Tools and Supplies
CAPCOM new game package. Phillips and Slot Screwdrivers Socket Set Wire Cutters and Strippers Pliers or Channel Locks Planning and Careful Thought Electric Drill 3/30", V4", 7he” Drill Bits V4” Plex Bit 13/45” Chassis or Sheet Metal Punch 11/4” Plex Hole Saw Glass of Water and a Snack Small File Razor Knife and Sharp Blades Straight Edge Painting Supplies (if you do your own painting) Paint Brush and Paint (don’t forget the primer) Paint Roller and Pan Sand Paper Putty Knife and Wood Putty Staple Gun and Staples Soldering Iron and 60/40 Resin Core Solder Vacuum Cleaner Assorted Fastening Hardware Shrink Tubing: 3/32”, Ve", 3/16” Masking Tape 31/2” OR 4” Wire Ties Spray Window Cleaner and Rags (baby diapers work GREAT!)
Dip Switch Tables
Optimize Your Profits
Thorough Research shows that two and a half minute games both satisfy players and also keep the quarters flowing. If games aren’t running about two and a half minutes long, then collections probably aren’t at their peak. You’ll want to tailor your game to your location. The trick is to adjust a few DIP switches. (See the chart in this book.) It’s easy!
VN
OUP
DIP SW (B)
| ITEM | DESCRIPTION | 1 | 4 | 5 | 6 | 7 | 8 |
YES. OFF.
| CONTINUE | NO | ‘ON |
NORMAL OFF
| SCREEN | FLIP’ | ON |
NORMAL ofr | OFF
| DIFFICULTY | EASY | ON | OFF |
| LEVEL | DIFFICULT | OFF | ‘ON |
| VERY DIFFICULT | ON | ‘ON | |
| FOR 1 PLAY | OFF | OFF | |
| TABLE TYPE | OFF | ON | |
| FOR 2 PLAY, ALTERNATE | ON. | ON |
YES OFF
| DEMO SOUND | NO. | ON |
YES OFF
| DEMO BGM | No | On |
DIP Sw (C)
| ITEM | DESCRIPTION | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 1 COIN 1 CREDIT | OFF | OFF | OFF | OFF | |||||
| 1 COIN 2 CREDITS | ON | oFF | ofr | OFF | |||||||
| 1 COIN 3 CREDITS | OFF | ON | OFF | OFF | ||||||
| 1 COIN 4 CREDITS | ON | ON | orr | OFF | ||||||
| 1 COIN 5 CREDITS | OFF | OFF | ON | OFF, | ||||||
| 1 COIN 6 CREDITS | ON | OFF | ON | OFF, | |||||
| COIN 1 | 2 COINS 1 CREDIT | OFF | ON | ON | OFF | ||||
| 2 COINS 3 CREDITS | ON | ON | ON | OFF | |||||
| 3 COINS 1 CREDIT | ofr | ofr | OFF | ‘ON | |||||||
| 3 COINS 2 CREDITS | ‘ON | ofr | OFF | ‘ON | ||||||
| 4 COINS 1 CREDIT | OFF | ON | OFF | ON | |||||
| 5 COINS 1 CREDIT | ON | ON | OFF | ON | |||||
| 5 COINS 3 CREDITS | OFF | OFF | ON | ON | ||||||
| 6 COINS 1 CREDIT | ‘ON | OFF | ON | ‘ON | |||||
| 8 COINS 3 CREDITS | OFF | ON | ‘ON | ‘ON |
1 COIN 1 CREDIT ore | ore | ofr | OFF
| 1 COIN 2 CREDITS | ‘ON | orr | orr | OFF | |||
| 1 COIN 3CREDITS | OFF | ON | orr | OFF | |||
| 1 COIN 4 CREDITS | ‘ON | ‘ON | orF_| | OFF | |
| 1COIN SCREDITS | OFF [| OFF | ON | OFF | |||
| 1 COIN 6 CREDITS | ON | OFF | ON | OFF | |
| 2coins 1crepiT | OFF | ‘ON | ON | OFF | ||
| COIN 2 | 2COINS 3CREDITS | ON | ON | ON | OFF | |
| 3 COINS 1 CREDIT | ofr | oFF | OFF | ‘ON | |||
| 3COINS 2CREDITS | ON | OFF | OFF | ON | |||
| 4 COINS 1CREDIT | OFF | ON | OFF | ‘ON | ||
| 5 COINS 1 CREDIT | ON | ON | OFF | ‘ON | |
| S COINS 3CREDITS | OFF | OFF | ON | ON | |||
| 6 COINS 1 CREDIT | ON’ | OFF | ON | ON | |
| 8 COINS 3CREDITS | OFF | ON | ON | ON | ||
| FREE PLAY | orF | oFF | OFF | OFF | ON | ON | ON | ON |
DIP A is not used, but for only TEST MODE, DIP A No. 8 — ON
Installation Procedures
Something to Think About Your final product will be a new game. You have made a wise decision to transform a game that has seen better days in the all
Let’s Get Our Hands Dirty
Preparing the Original Game for the New Game Remove the following:
| 1. | Main Logic Board(s) | 4. | Monitor Bezel |
| 2. | Control Panel | 5. | Marquee |
| 3. | Monitor Plexiglas | 6. | Graphics |
| would recommend painting your cabinet to give it a fresh new look. (If it is geographically inconvenient to make use of our facilities, you may consider having an auto body shop take care of your painting needs.) If your cabinet has wood grain sides; remove old graphics and adhesive (adhesive may be removed with lacquer thinner. If you intend to use your original Plexiglas, be sure it is in mint condition or it should be replaced. Thoroughly clean out your cabinet.
Time to Install Your New Goodies
Before You Start . .. Remember DO NOT Do this Work with the Power On!
Logic P.C.B. Cage Mount the logic cage securely (away from power supply). A Mark and drill pilot holes (3/32”). B_ Place the logic cage (bottom) over the holes and secure it with the supplied wood screws. C Install the PC.B. into the logic cage. Use feet and spacers supplied and adjust them so that the screws will go through the slots in the cage bottom.
Wire Harness
Attach the wire harness connector to the main logic board. CAUTION: Sometimes the connector is not keyed and it is very easy to install it reversed on the logic board. Even if it is keyed, always triple check to be sure the wire inputs were connected correctly to the connector and the connector to the logic board.
Connecting the Wire Harness to the Existing Wires When you hook up the control panel, power supply, monitor or other subassemblies that remain in the game cabinet to your new wire harness, try and use their existing secondary connectors.
- Cut the original wire approximately three inches from the original connector. Strip off about one half inch of insulation.
- Solder the new wire designated for that position to the original wire you just stripped.
- Melt shrink tubing around all your in-line wire connections. Do not use electrical tape. Tape could unravel over a period of time due to the cabinet heat and cause you a great deal of trouble.
- Use wire tie wraps, and secure the cable to the cabinet whenever it seems necessary. Remember this is a new game, not a sloppy conversion.
Power Wires
- Connect the wires that are designated for your power supply. You will need a supply of +5V, +12V & ground. Your new game package may not require all of the voltages that were used in the original game. Tie off any unused wires.
- You will notice that you probably have more than one wire for each voltage. It is a good idea to use all wires supplied (double up if it is necessary). This will help to ensure that you don’t overload the edge connector pins and cause them to ‘‘burn’’.
Monitor Wires
You will be connecting the wires designated for the RED, GREEN & BLUE video guns along with the SYNC & GROUND wires.
Speaker Wires Find the two wires that are designated for the speaker and hook ’em on up.
Coin Door Wires
- Connect the designated wires to the coin switches and meter.
- You can connect your door lamps to the unused —5V power supply. Some games have separate power outputs for the coin door lamps.
- Be sure to clean and lubricate your old coin mechanisms. Keep the money coming in.
Guess What?
You are almost done with the electrical connections of your new game. All you have left is the control panel wiring. But we are.going to hold off on that for right now. We have a few other things we need to do first. So why don’t you go ahead and get yourself a drink of water and stretch your legs. When you return, we can take a fresh look at your progress and then move forward.
Smoke Test
What Test?
Don’t worry. All this means is that you are ready to apply power to the system for the first time and you pray that there will be no smoke from a simple oversight. You are just about ready to power up the logic board. But first we need to recheck your work.
- Carefully inspect the game for loose power wires, exposed connections and extra fastening hardware.
- Make sure the logic board, board cage, monitor, and power supply are securely fastened in place.
- Double check the connectors to be sure they are wired and connected properly.
- Set the dip switches on the logic board to the factory recommendations.
Time to Apply Power: Look and smell for smoke. (TURN OFF IMMEDIATELY IF ANY IS NOTICED) Listen for game sounds. If after one minute you have not heard any sounds: 1.
2.
A) B) Cc) Check for proper dip switch settings. Adjust volume control and check speaker connections. Check the +12V power supply to the logic board.
B) Is the picture in sync? If your picture has the top and bottom halves of the screen reversed and it will not stop rolling, change your sync polarity on the monitor. (Positive to negative). If your monitor does not have dual polarity positions for sync, then you will need to reverse the sync yourself by installing a simple one I.C. circuit between the logic board and the monitor. (The following illustration shows a hookup for both composite and separate syncs.
HORIZONTAL SYNC INPUT FROM PC.B. 5 Vec (OR COMPOSITE SYNC INPUT) HORIZONTAL SYNC OUTPUT TO MONITOR (OR COMPOSITE SYNC OUTPUT) VERTICAL SYNC OUTPUT FROM PC.B.
VERTICAL SYNC OUTPUT TO MONITOR \
TALSO4 = NOT USED
NOT USED
GROUND
G07 MONITOR SYNC MODE
- Replace R314 from 3909 to 1.8K resistor
- Replace C303 from .1pf 35V cap, locate ‘‘+’’ side of cap to collector of X305
- Replace C501 with .1p (old C303)
Now how’s your picture? e Is it centered? ¢ Is it too bright or dim? e Is it in focus? Check your monitor manual for these adjustments. If your screen looks ‘‘off’, then your new game transformation may have been in vain. So let’s take the time to make the monitor look great. Is the picture upside-down? Dip switch 5 on switch bank ‘‘C’”’ should solve your problems.
Control Panel Assembly
Remove the buttons, joysticks and wire harness and put them aside for now. Do not remove the original panel overlay until the new holes have been drilled. Mark positions on the panel for the new holes. CAPCOM supplies a clear 1/8” thick of Plexiglas with every new game package to convert the control panel. We feel that your new game investment is well worth protecting. . .and the control panel is the first place to show wear and tear.
- You will need to cut this piece to size. Use the control panel as a template. ¢ Use a razor knife to score the Plexiglas deeply. Then use a pair of pliers to break away the extra Plexiglas. Now drill the holes in your panel that you have marked off for the buttons, joystick and bolts. Drill the same holes on your Plexiglas panel protector. Once again use your panel as a template. Hint: To avoid chipping while you are drilling the holes, place the Plexiglas securely on a soft wood surface and use a Plexiglas drill bit and hole cutter. The holes are now all cut. Smooth them out on your panel and Plexiglas with a fine toothed file. Remove the original graphics overlay from the panel. Clean up the panel and install your CAPCOM graphics. Make It Easier: Peel the top half of the protective backing off of your graphics. Start from the center and smooth out your overlay. Make sure you have about an inch extra coming off the top. No bubbles please. Now peel off the bottom half and do the same as you did for the top. Adhere the instruction and function labels. Install the Plex Control Cover over your completed new game panel.
Marquee Installation
Using the original marquee as a template, Center your new game marquee graphics and score the new marquee deeply to fit the cabinet. Break off the excess with pliers. Be sure the light behind the marquee works. Everything should always work on a new game. Take your time. . .Don’t forget this is going to be a new game.
Side Graphic Installation
Be sure sides of game are clean and free of old adhesive, dust, etc. Mark position of decal with eraseable pen or pencil (centered on upper half of cabinet). Peel off top 1/4” of decal backing and apply to cabinet with a smoothing motion (use a soft rag). Continue peeling off backing and smoothing. Remove any small bubbles with a pin or razor blade (pop them!)
Finishing Touches
Check the game inside and out for any imperfections. Secure any loose wiring or fastening hardware. Make sure the coin door is tight and the coin mechs are well adjusted. A game is no good to anybody if you can’t get a coin into it. Once again go over every step of this new game transformation in your mind. Be sure everything is correct and to your liking. Power up the game. A. Check all the coin switches. (Does the coin meter work?) B. Play your new game. e Are all the player controls working? e Are the game sounds present? e Is the volume level proper? e Are the dip switches set properly? Well, that’s about it. Good Luck.
8-WAY JOY STICK
\/ / 7 7 POSSIBLE 1 & 2 PLAYER LOCATIONS
Control Panel Positions
CONTROL PANEL
It og 8 WAY JOYSTICK JUMP
8 WAY JOYSTICK
uP
MOVE TO @ MOVE TO
THE LEFT pS THE RIGHT
DOWN
CREDIT LIMITATION AT ONE TIME: 9 CREDITS. POSITION OF DIP SWITCH
MAIN HARNESS CONNECTIONS
cQc§cc. rr
| Wire Color | Solder Side | Parts Side | Wire Color | |||
| Black | Ground | A | 1 | Ground | Black | |
| Black | Ground | B | 2 | Ground | Black | | |
| Red | +5V | Cc | 3 | +5V | Red | |
| Red | +5V | D | 4 | +5V | Red | |
| White | (Not Used) -5V | E | 5 | —5V (Not Used) | White | |
| Yellow | +12V | F | 6 | +12V | Yellow |
H 7
| Brown | Coin Counter 2 | J | 8 | Coin Counter 1 | Brown |
| Red | Coin Lockout 2 | K | 9 | Coin Lockout 1 | Red |
| Black | Speaker (—) | L | 10 | Speaker (+) | White |
| Blue | (Not Used) | M | 11 | (Not Used) | Blue |
| Green | Video Green | N | 12 | Video Red | Red |
| Gray | Video Sync | P | 13 | Video Blue | Blue |
| Red | Service SW | R | 14 | Video Gnd | Black |
| Brown | (Not Used) | Ss | 15 | (Not Used) | Brown |
| White | Coin SW 2 | T | 16 | Coin SW 1 | White |
| Gray | Start SW 2 | U | 17 | Start SW 1 | Gray |
| Violet | 2P Up | Vv | 18 | 1P Up | Violet |
| Blue | 2P Down | Ww | 19 | 1P Down | Blue |
| Green | 2P Left | xX | 20 | 1P Left | Green |
| Yellow | 2P Right | Y | 21 | 1P Right | Yellow |
| Orange | 2P Push | Z | 22 | 41P Push | Orange |
| | Red | (Not Used) | a | 23 | (Not Used) | Red |
| Brown | (Not Used) | b | 24 | (Not Used) | Brown |
| Blue | (Not Used) | c | 25 | (Not Used) | Blue |
| Blue | (Not Used) | d | 26 | (Not Used) | Blue |
| Black | Ground | e | 27 | Ground | Black |
| Black | Ground | f | 28 | Ground | Black |
NOTES:
NOTES:
CAPCOM GAME OWNER:
Please fill out card and register for Free drawing at COIN-OP SHOWS. YOU NEED NOT BE PRESENT TO WIN.
Remember to fill in S/N of PCB (S/N IS REQUIRED FOR DRAWING).
REGISTER FOR FREE DRAWING
| CAPCOM U.S.A., INC. 3303 Scott Boulevard Santa Clara, CA 95054
CAPCOM
COMPANY NAME 3303 Scott Boulevard
Santa Clara, CA 95054 (408) 727-0400
OCOTTT TTT Tr rr ttt rrr ttt ttt tr rt) LAST NAME FIRST NAME
ADDRESS.
ee STATE ZIP CODE AREA CODE/PHONE NO.
PRODUCT PURCHASED: DATE OF PURCHASE PURCHASED FROM MONTH DAY YEAR = SIN
HOW WOULD YOU RATE THIS GAME EXCELLENT!) VERYGOOD() FAIR(] POOR [)
HOW DID YOU HEAR ABOUT THIS GAME: MAGAZINE |) FRIEND) OTHER aawano (TTTTTTT
DO YOU OWN ANY OTHER CAPCOM ARCADE GAMES? YES [) NO[] PLAN TO BUY IN NEAR FUTURE (! WHAT TYPE OF ROUTE DO YOU OWN ARCADE [) SMALL ROUTE!) LARGE ROUTE [) HOW MANY GAMES DO YOU OWN CAPCOM BOWLING [] GHOULS'N'GHOSTS C1 WHAT CAPCOM ARCADE GAMES ARE YOU FAMILIAR WITH:
COMMENTS: STRIDER (] FORGOTTEN WORLDS [7 DYNASTY WARS [1] 1943] STREETFIGHTER [] OTHER