CATHODE RAY TOMES

Wrestle Mania Kit

WWF: Wrestlemania (rev 1.30 08/10/95) (Midway, 1995) · Kit Manual · 42 pages · 19 sections · original scan

Page 1

@ Mipway

August 1995 16-44030-101

Operations Manual Includes

« Kit Installation & Operation « Testing & Problem Diagnosis « Parts Information ¢ Wiring Diagrams

Midway Manufacturing Company 3401 North California Avenue Chicago, Illinois 60618

Page 2

MIDWA Y August 1995

16-44030-101

Operations Manual Includes

e Kit Installation & Operation « Testing & Problem Diagnosis e Parts Information « Wiring Diagrams

Midway Manufacturing Company 3401 North California Avenue Chicago, Illinois 60618

Page 3

W WY.

WORLD WRESTLING FEDERATION

WrestleMania.

Defeat game with a single wrestler to become Intercontinental Champion.

Defeat game with all eight (8) wrestlers to become the New WWF CHAMPION!

Try different stick/button combinations for SECRET MOVES.

EXAMPLE MOVES:

ATTACKS:

From Standing: T,T,POWER PUNCH = HEAD GRAB

From Head Hold: A,T,T,POWER PUNCH = SPECIAL MOVE.

REVERSALS: (2X Damage) When being held by the head, players can reverse attacks.

Example: U,D,D,POWER KICK

COMBOS: Perform a variety of moves to build up COMBO METER.

Get opponent into HEAD HOLD to perform SPECIAL COMBOS!

RUN:

Press Punch and Kick together. Use Joystick to choose desired direction.

Page 4

TABLE OF CONTENTS

Section 1 - Operation... ccccccccscsccscscecescvecscesvsesecseescsceecsceetsssecseevessenseseeees 1-1

Safety Notices

Notice - FCC Warning Sticker

Game Features Conversion Procedure .............ccccccscscccseceeseseneteseeeessecscsreneesessecseesestitieetneeeeenarsasisieees 1-4

IMSPOCHION. eee eceeccccsesceseceecseseesesenseereecescaesessssececsenseeecseseesesetececeeneneteneeereeees 1-4

TOOlS & SUPPHOS 2.0.0... cece ese ceseseeeeeseessscscsestsescseneeeerscesseseersrererstetstsnseseeeeneae® 1-4 Cabinet Modifications ... Control Panel Modifications.....csscsccssccsssssessssesaseeseesacseossasenet scsstussuastesivsorvessnses 1-6 Control Panel Template

Install P.C.B. and Wiring into Jamma Cabinet..

Install P.C.B. and Wiring into Non-Jamma Cabinet

Starting-Up Player Controls. ..........:cccccccsesssesenesssseescesesssecsesevscseeasseserssesaseeceeseseseeseseesaseeees 1-10 Control Panel Diagram «vcswsies cssessses ssveeasingeresesecauts one cevnvangea vogeseeesnnmneneracancevenges 1-10 Menu System Operation... ccc cc ccccsesseecnecsesecsenessesnsesesseserseseesenenseseeeesteseree 1-11

Operation... cece cccccnceeeeseeeesceneseeeeceneseersecceeaseresensseseverenseeseneieneeeseees 1-11

Main Menu 0.0... cece ce cee eec ces cesesnesecseeaceeraeessesaesneaneueeiseesetsnenssnssneesseeeeeeens 1-11

Diagnostic Tests........0...cccccccccecesesescsesesesesesesnsnenetescecseseneisissnsnsneseserssetesseenseete 1-11 Switch Test... esses necesses eee reseeessesueseeeseeeeneeesssesenseseesseeesnesenersess 1-12

DIP Switch Test & Table... ccccccccccccsesesesesesessesesesesacsesusneeesesneseseeesieeeeees 1-13

Video Section Testing........eceecceceecssesesesteseseseeseseseeeeeeeseeteseeessesenenenees 1-14 Sound Section Testing 20.0... cccccccessseeseseseseseseeecsescsvsvsvsvscseseseseseeesseceee 1-14 Monitor Patterns... seseeseeseessesesessecsessnsecseeseessnsneansenseetaneneeneaeas 1-14

Run Burn-in Test... ccc cecces ee ceseecescssanenessenenssessacssssestsussesescssestecseeececeee 1-15

COIN BOOKKEEPING «0... ee ec cece es cesesessessesesececstecseesseteneneatessesesscanessscissesueseeeeneeee 1-16 Game Audits 0.0... cece cece es esesestessesescesescesevsseecsetsenssestansasssavessucssensesscaneeeaes 1-17

Game Adjustment ..........cccccccccsecsssseseteescescseescseecseeaeseresavscaesessrvevsevsvereaseeeae 1-19 Standard Pricing Table ..........c.ccccsseecsseceeseseeeeeseseesesesesesneeeeesesseesvetseeserevere 1-20 Custom Pricing... cesses sessseeesesesseeneeesneseeenseteieenseeeseeneenesestesesetcecseearenees 1-21

Page 5

Utilities ..

Hardware Inf

Real Time Clock 00.0.0. ccceccsnenseceesenenscsensenscsesnscteetesenenstisesienseienieesstnecses 1-23 Adjust Volume ooo. ccce cece ee ee cece ceectescsessaseseeieeeeciecsseesseeeteeeteeteeteiesentees® 21-23, Troubleshooting

Section 2 - Parts Information... eee cere ee tees cre nennsnsnnstieeeientintnetnsnes 2-1

Decal Sets oo... eee e re eeseererercssseseseessscsseceessrcetinicisisceesssettevesitieneorosirnseerereed 2-2

WWE Unit Final Assembly .0....0..0...cccecceceececscseneceesseseessecseeceeeeteretessiseresitnssetssesseeee 2-3

WWE Unit Final Assembly Parts List .......0.0cccccccceeeececneereesesereeesesenensisnsensnesseneees 2-4

Section 3 - Cabinet Wiring ooo... cece terre ee tsetse sensesnensestieneieisetittennntee 3-1 SAMMA Chaat sivcs..scvessisivecsnieceniesas ciocsconereennnnna i44initiNaBUSEAD Oeason cnensoqe serene nes BiBtaHhCEsn ake oc 3-2 Interboard WAIN oo... eee ceeecscsesesnenensrstseseecsesesereenenseseevevesenenensnsnsrsieisitisisisreeverenes 3-3

Cabinet Wiring Diagram... .ccceececcescseeeeeeerenecevsescereseueueeecsesererererereceniacersciniesssesea 3-4 Coin Switch and Meter Wiring..........ccccccccesesesnsceeeeesereecteesesiseseteescetseseseseenensets 3-5

NOLES ieee eects cens ete rereretenerscesesceeeesirevsvevevscsnscesssnseeettsesecisstsesesvevavivesiuesinnesteenet® 3-6

©Copyright 1995 MIDWAY Manufacturing Company

Page 6

WWE

WrestleMania

KIT

SECTION

ONE

Operation

Page 7

Safety Notices

The following safety instructions apply to all kit operators and service personnel. Specific warnings and cautions will be found throughout this manual where they apply. We recommend that you read this page, and also all of Section One, before preparing your kit for play.

Nlcaurion

Salvaged Parts. Parts salvaged from old games are required to complete your kit. These salvaged parts must operate perfectly; otherwise, the converted game can not perform properly or safely. Always repair circuit board malfunctions and cabinet damage before conversion is attempted.

Power Supply. Be sure the power supply from your old game is capable of +5V at 5A, -5V at 1A, and +12V at 2A. These operating voltages are necessary for your kit.

Monitor. This kit is not intended for use with X-Y monitors. Suitable monitors have horizontally mounted CRT-s and raster electronics with inputs for red, green and blue video, as well as Composite Negative Sync inputs.

Coin Mechanism. Be sure to clean and lubricate your old coin mechanisms. Servicing them is crucial to your game's earning potential and operation.

Coin Meters. Coin meters are not provided with this kit. Wiring information is provided as a convenience to the operator.

Servicing/Installing. Always turn your game OFF and unplug it before attempting to service or install your kit.

PROPERLY ATTACH ALL CONNECTORS. Make sure that the connectors on each printed circuit board (PCB) are properly connected. If the connectors do not slip on easily, do not force them. A reversed connector may damage your kit and void the warranty. All connectors are keyed to fit specific pins on each board.

1-2

Page 8

NOTICE - FCC COMPLIANCE STICKER

|. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL

40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A

REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET

(MODEL 40135), THE FCC COMPLIANCE STICKER (16-9306) SUPPLIED IS TO

BE PLACED ON THE REAR OF THE CABINET.

Il. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT

GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY

RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC

COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC

COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE

CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

EPILEPSY WARNING

A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are commonly present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizure or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience any of the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convolutions, DISCONTINUE USE IMMEDIATELY and consult your physician,

1-3

Page 9

Conversion Procedure

Inspection Unpack the materials from the carton and inspect for obvious signs of damage. sure your kit is complete.

Part number Item Description A-20276-40030 WWF Unit Final Assembly } H-19960 Main Wiring Harness H-20101 Control Pane! Wiring Harness 03-8338-1 P.C.B. Mounting Spacers 16-9922 Epilepsy Warning Label 16-9306 FCC Compliance Label 16-9478.1 Registration Card 16-9998 Copyright Label 1995 16-10126 Control Panel Template 16-44030-101 Users Manual 20-10209-1 Red Push Button 20-10209-2 White Push Button 20-10209-3 Blue Push Button 20-10209-5 Yellow Push Button I 20-9978-1 Red Joystick 20-9978-3 Blue Joystick 31-1789 Clear Overlay 31-2305 Cabinet Decal (Sides) 31-2306 Control Panel Overlay 31-2307-1 Decal, WF Kit Set 31-2307-2 Decal, Control Pane! Housing 31-2307-3 Decal, WrestleMania Logos 31-2307-4 Decal, WWF Large Logo 31-2307-5 Decal WWF Medium Logo 31-2360 WF Instruction Card 4108-01193-10B #8 x 5/8” Tamper Proof Screw 4308-01123-24B 8-32 x 1 1/2” Bolt 4408-01128-00 8-32 Keps Nut Recommended Tools and Supplies Black Semi-gloss Paint Electric Drill Electric Screwdriver Grease Pencil or Marker Hex Driver 180 Grit Sandpaper or Electric Sander Pliers Razor Knife Soldering Iron and Solder Wire Cutters Black Electrical Tape Quick-hardening Wood Putty Use this checklist to be

eB MOmraree nnn sno nanantp onan aaa

Page 10

Cabinet Modifications

  • Fill in gouges with a good quick-hardening wood putty. Sand cabinet and wipe it clean.
  • Repaint the cabinet with black semi-gloss paint. For games with wood grain sides: remove old decals and clean the glue residue before painting. Allow paint to dry completely.
  • Pencil a line roughly at the top of the old graphic. Lightly moisten the cabinet with soapy water. Apply the decal starting at the top and working down. After the decal is in place, smooth it down, taking care to squeeze out air bubbles. If an air bubble is missed, pop it with a razor blade or a pin and smooth it down Allow 12 hours for the adhesive on the decals to set.
  • Check the kit for an FCC sticker. If this kit is installed in a Midway universal video cabinet (model 40135), the FCC compliance sticker (16-9306) supplied is to be placed on the rear of the cabinet. Installation of this kit into any other product does not guarantee compliance with FCC requirements. The FCC compliance sticker supplied should not be installed on the converted product until FCC compliance is

verified.

NOTICE - FCC COMPLIANCE STICKER

|. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135), THE FCC COMPLIANCE STICKER (16- 9306) SUPPLIED IS TO BE PLACED ON THE REAR OF THE CABINET.

Il. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

  • Remove viewing glass and apply the game play instruction decal to the front of the monitor bezel. Be sure the decal does not obstruct the CRT.
  • Place Epilepsy Warning Label on the front of the monitor bezel. Be sure that it does not obstruct the CRT screen but is in full view of the players.
Page 11

Control Panel Modifications

IMPORTANT: Placement of joysticks must be horizontal to the control panel for proper playing capability (see contro! panel layout on page 1-7). Use template (16-10126) from kit, as a guide.

1, Remove control panel buttons, joysticks and old contro! panel artwork.

  • Use the full control panel template to design the control panel. Separate templates are located on the

last pages of this manual.

  • Drill holes as needed for joysticks and control panel buttons. Plug previous holes with wood blocks,

putty, cardboard or epoxy. File new holes smooth.

4 Carefully remove the backing on the control panel overlay. Place overlay on top of control panel

Prevent air bubbles from getting under overlay.

  • After the overlay is on securely, use a razor knife to trim excess and to cut holes for control panel buttons and joysticks. Then position stickers around the appropriate locations.
  • Being careful not to displace the stickers, place the clear overlay on the control panel. Use the torx head tamper resistant screws and the flat washers to attach the clear overlay to the control panel. Once the clear overiay is securely in place, cut holes for the joysticks and control panel buttons.
  • Remove switch from push button; grasp switch firmly on the left and right sides and squeeze prongs together, (do not grasp switch by the solder lugs). Carefully pull switch from housing. Unscrew nut from housing. Push switch housing through control panel from the front. Screw nut back onto switch housing from the back of the control panel. Carefully push switch back into switch housing.
  • To install the joysticks, remove the e-ring and slide the shaft and plastic ring off the joystick base. Be sure that the bushings remain in the base. Use the 8-32 bolts and the 8-32 nuts to attach the base to the underside of the control panel. Slide the plastic ring around the shaft so that the rough side is next to the shaft handle. Slide the shaft through the control panel and base. Replace the e-ring.

1-6

Page 12

Control Panel Template

Control Panel Layout

\ — e © SIAR! POWER PUNCH YELLOW, YELLOW: ¢ : (ewe) (BLUE) ‘ i (RED)

POWER KICK (neo) (RED) POWER KICK caus) (BLUE)

1-7

Page 13

INSTALL PC BOARD AND WIRING INTO A JAMMA CABINET

  • Replace the existing CPU board and sound board with the WWF CPU/Sound board. Use the 1/4” P.C.B. mounting spacers and surplus screws to secure the CPU/Sound board to the electronic rack, or to the inside wall of the cabinet.
  • If using the JAMMA cable provided with the kit, disconnect the old JAMMA cable from the speaker, power supply, control panel switches (which may already be disconnected) and the coin door. Remove the cable from the game. Leave the power chassis as is. Note: /f you choose to use your own JAMMA cable, check the JAMMA chart to be sure you cable is compatible.

VAI cAUTION

Properly insulate any unused wires within the JAMMA cable, especially the red, orange and yellow wires. This is a fully wired JAMMA cable. Many of the wires will not be used for this kit. These wires have been installed so that you can use this cable for future kits.

The operating voltages from the power supply should be as follows:

+5V @5 Amp(Red Wires)
5V@0.5 Amp(Yellow Wires)
+12V @2.0 Amp(Orange Wires)
Note: All power supply voltages are + or - 5%.
  • Connect the JAMMA cable to the CPU/Sound board. Use the Cabinet Wiring Diagram for reference and solder the correct JAMMA cable wires to the speaker. Then, connect the wires to the coin door, power supply and the control panel. Player 1 has white-’color stripe’ wires, except for the start button, which has a solid white wire. Player 2 has violet-’color stripe’ wires. Use the Cabinet Wiring Diagram in section 3 for reference when connecting these wires to the player 1 and 2 control panel switches.
  • Connect the biue-'color-striped’ wires to P12 of the CPU/Sound board. Use the Cabinet Wiring Diagram in section three for reference when connecting these wires.
  • Place the FBI Warning Label next to the CPU/Sound board. Be sure the label is completely visible.
  • Place the Copyright label next to the CPU/Sound Board. Be sure label is visible.

NOTICE - FCC COMPLIANCE STICKER

1. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135) AND

FOUND TO COMPLY WITH FCC PART 15 CLASS A REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135), THE FCC COMPLIANCE STICKER (18-9306) SUPPLIED IS TO BE PLACED ON THE REAR OF THE CABINET.

MI. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

Page 14

INSTALL PC BOARD AND WIRING INTO A NON-JAMMA CABINET

  • Replace the existing CPU board and sound board with the WWF CPU/Sound board. Use the 1/4” P.C.B. mounting spacers and surplus screws to secure the CPU/Sound board to the electronic rack, or to the inside wall of the cabinet. .
  • Leaving several inches of wire, cut the wires at the coin door, control panel switches (which already may be disconnected, speaker and power supply. Remove the harness from the cabinet. Leave the power chassis as is. Note: Be sure that all spliced wires are well insulated with black electrical tape.

The operating voltages from the power supply should be as follows:

+5V@5 Amp(Red Wires)
-5V@0.5 Amp(Yellow Wires)
+12V@2.0 Amp(Orange Wires)
Note: All power supply voltages are + or - 5%.
  • Install the JAMMA cable provided with the kit. Players 1 and 2, the coin door and the power supply wires are bundled together in individual groups. Insure that the cable is properly dressed and supported.

A CAUTION

Properly insulate any unused wires within the JAMMA cable, especially the red, orange and yellow wires. This is a fully wired JAMMA cable. Many of the wires will not be used for this kit. These wires have been installed so that you can use this cable for future kits.

  • Connect the JAMMA cable to the CPU/Sound board. Use the Cabinet Wiring Diagram for reference and solder the correct JAMMA cable wires to the speaker. Then, connect the wires to the coin door, power supply and the contro! panel. Player 1 has white-'color stripe’ wires, except for the start button, which has a solid white wire. Player 2 has violet-color stripe’ wires. Use the Cabinet Wiring Diagram in section three for reference when connecting these wires to the player 1 and 2 control panel switches.
  • Connect the blue-’color-striped’ wires to P12 of the CPU/Sound board. Use the Cabinet Wiring Diagram in section three for reference when connecting these wires.
  • Place the FBI Warning Label next to the CPU/Sound board. Be sure the label is completely visible.
  • Place the Copyright label next to the CPU/Sound Board. Be sure label is visible.

NOTICE - FCC COMPLIANCE STICKER

|. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135), THE FCC COMPLIANCE STICKER (16-9306) SUPPLIED IS TO BE PLACED ON THE REAR OF THE CABINET.

Il. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

Page 15

Game Features

WWF WrestleMania is a one or two player game.

Starting Up Switch ON power to the game. A "rug" pattern appears on the CRT screen. When the "rug" pattern ends, the screen shows a CPU Board map. Bad chips are indicated in red, good chips are in green. The software revision level is shown at the top of the screen.

NOTE: When an error is detected during Start-up Tests, game start-up does not progress, and an error message appears on the screen.

Insert the desired amount of coins or tokens.

Player Controls

. Start Button

. Punch Button

Kick Button

. Defense Button

. Power Punch Button

° Power Kick Button

. Joystick

START (rELLOW)

O JOYSTICK (BLUE) PUNCH (BLUE) POWER PUNCH (Btue) ome OO (WHITE)

Kick POWER KICK (BLUE) (BLUE) O START (YELLOW)

O uoystick (RED) PUNCH (RED)

© »

Kick (RED) (RED) POWER PUNCH RE

(wire)

POWER KICK (RED)

Page 16

Menu System Operation

OPERATION All Game Audits, Adjustments, and Diagnostics are options of the Main Menu. Each option, in turn, has its own menu, listing several choices that may be acted upon as desired.

To activate the Main Menu (shown below), press the test mode switch, or set DIP Switch #1, Switch 1 to the ON position. Game adjustments, bookkeeping, and diagnostics are all accessible from this menu.

Use any joystick to select desired menu option; press any control panel button to activate it. Notice that the options are highlighted in sequence.

Note: Only highlighted options can be activated.

Main Test Menu

DIAGNOSTIC TESTS To enter Diagnostic Tests from the Main Menu, use any joystick to select the option; press any control panel button to activate.

Diagnostic Tests Menu

1-11

Page 17

Switch Test The Switch Test allows the operator to test the switches on the control panel and the coin door.

Select the Switch Test by using any joystick to select the option, then press any control panel button to activate. Pressing a switch on the control panel or coin door causes the corresponding switch location on the screen to light.

O O O_O 0.0 8% 60285 Rolo

PRESS START 1 AND START 2 TO EXIT ©) sum

oO O oO Test COIN’ COIN2 SERVICE COINDOOR

O BILL IN

COINS VOL UP

LEFT RIGHT CREDIT INTERLOCK

COIN4 VOL DN

Switch Test Screen

To exit switch test screen, press start 1 and start 2 button simultaneously.

1-12

Page 18

Dip Switch Test

The DIP Switch Test allows the operator to check the location of the two 8-position DIP switches on the CPU Board. The operator can also change the setting of each position of each DIP Switch during this mode.

To enter the test, use any joystick to select the option; press any control panel button to activate. The screen displays a layout of current DIP Switch settings.

To change a DIP Switch setting, move the switch to the desired setting, then check the screen to verify that the switch now shows the new setting.

Press any control panel button to exit the Dip Switch Test.

DIP Switch 1 Setting Table Swi | Ssw2 | Sw3 | Sw4 | SW5 | SW6 | SW7 | SW8 Test Switch Off* On Powerup Test Off* On | Not Used | Off* On Time/Date Off* On Not Used Off | Off On On No Dollar Bill Validator Off* Dollar Bill Validator Installed On Not Used Off | on

DIP Switch 2 Setting Table Sw2_| Sw3 | SW4 Swe | SW7 | SW8 One Coin Counter, 1CountiCoin Of | One Coin Counter, Totalizing Off Two Coin Counters, 1Count/Coin On One Coin Counter, 1Count/Coin On al Country USA Off* French On German Off Unused On Not Used Off* | Off* On On DIP Switch Coinage Off* CMOS Coinage On “Indicates factory setting

Page 19

Video Section Testing The Video Section Test (much like the Start-up Test) allows the operator to check the RAMs and ROMs.

Highlight the Video Section Test by using any joystick to select the option; then press any control panel button to activate. When this test is activated, a "rug" pattern appears on the screen. The screen then changes to show the layout of the RAMs and ROMs on the CPU. Any chip shown as gray with a white outline should turn green during the CPU Test. During the test, chips are good if they turn green, they are faulty if they turn red.

Press any control panel button to exit the Video Section Test.

Sound Section Testing The Sound Test allows listening to some of the sounds that the game is capable of producing.

To enter the test, use any joystick to select the option; then press any control panel button to activate.

Sound Test Menu Monitor Patterns The Monitor Patterns Test provides a menu for testing the monitor. Highlight the test by using any joystick to select the option; then press any control panel button to activate.

jonitor Patterns Menu

The RED, GREEN, and BLUE SCREEN tests fill the screen with either red, green or blue.

The COLOR BARS test fills the screen with several gradated colors to help with red, green and blue level adjustments. Each color should appear sharp and clear.

The CROSSHATCH PATTERNS test fills the screen with a grid and should be clear.

\f any of the Monitor Pattern Tests shows a need for adjustment, use the proper controls on the Monitor Board.

Page 20

Run Burn-in Test The Burn-in Test continually repeats the Video Section Test. Use any joystick to select the option; then press any control panel button to activate. When the Burn-in Test detects an error, the test stops and displays an error message on the screen. Use this test to find intermittent CPU problems.

RUN BURN-IN TEST ARE YOU SURE?

To exit this test, switch the game OFF then ON again.

Page 21

COIN BOOKKEEPING The Coin Bookkeeping Table records the coin box totals and game play counters. The leit side of the table names the bookkeeping item, the right side shows the number of coins, credits or plays for each item.

Highlight Coin Bookkeeping by using any joystick to select the option; then press any control panel button to activate.

Page 22

GAME AUDITS The Game Audits Table records the game play statistics. The left side of the table names the Audit item; the right side shows the amount of play.

Page 2 of Audit Table

1-17

Page 23

GAME AUDITS CONTINUED

Page 4 of Audit Table

Page 24

GAME ADJUSTMENT

The Game Adjustment menu option allows the owner/operator to change the Game Pricing and Game Difficulty. The activated item provides a setting choice. Highlight setting choice with any joystick, then press any button to lock setting.

Game Adjustment Menu Standard Pricing Standard Pricing allows the operator to choose any of the “Standard selections for the Standard Pricing Table.

Custom Multipliers Customize the internal coin chute multipliers for each chute.

Custom Pricing Custom Pricing allows the operator to install pricing other than that of the Standard Pricing Table. Custom Pricing also allows the operator to select the amount of credits required to start a game and the amount of credits required to continue a game. This option is adjusted from the Dip Switch Settings.

Free Play This option selects free play. The setting choices for this adjustment are: -No (factory setting) -Yes

Game Difficulty Allows the operator to select the difficulty level of the game. The setting range is: -Easiest: 1 -Hardest: 5 -Factory Setting: 3

Average Game Time Allows the operator to contro! the overall average match time. The setting range is: -Slowest: 1 -Fastest: 5 -Factory Setting: 3

Attract-Mode Sound Determines whether the game will make sounds in the attract mode. The settings for this adjustment are: -On -Off (factory setting)

Page 25

Standard Pricing Table

NAME‘Settings CrediCoinLeft Chute ]GenerRightFourthBik
|Chutechute |chute
USAt~256(@ to Start; 2 to Continue)25825¢$1.00
usazs125¢(2o Start; 1 to Continue)2825¢$1.00
USAS125(1 to Start, 1 to Continue)25¢25¢$1.00
usaa41504, 3/81.00(1 10 Start; 4 to Continue)25¢25¢$1.00
UsAS41150¢, 4151.00(2 ta Star; 1 to Continue)25¢25$1.00
SAS1150(1 to Start; 1 to Continue)225¢$1.00
USAT1150f, 3/81,00. (1 to Star: 1 to Continue)25¢25¢$1.00
usas11504, 4181.00 (2 to Start; 2 to Continue)25¢25¢$1.00
usag1125¢(310 Start; 2 to Continue)25¢25¢$1.00
usato1125¢{@ to Start; 3 to Continue)25t258$1.00
USAECA4254, 4181.00_(2 to Stat; 2 to Continue)$1.001025¢056$1.00
GERMAN1/10M, 6/5DM10MSDM
GERMAN241M, 750M10MDM
‘GERMANS11M, 850Msom50M
GERMAN440M, 5/5DM1DSDM
GERMANS1/40M, 6/50M1DM60M
GERMAN ECA41M, 2/2DM, 650MSDM410M20M
FRANCEt25F, SIN0FSF10F
FRANCE22ISF, 40Fca10F
FRANCES1ISF, 3/10FSF10F
FRANCE4AUSF, 240FoF40F
FRANCES,2ISF, SOF, 1112 X 10FSF10
FRANCES2IBF, AINOF, 812 X 10F.5F10F
FRANCE?“SF, 3MOF, 712 X 10FSF40F
FRANCESAUSF, 2I10F, 8/2X 10FSF10F
FRANCES113 X 1, 205F1Fcd
FRANCE10112X 1F, SISF1FSF
FRANCE118 X 1, 208F, 5/2 X SF1SF
FRANCE122X 1F, SISF, 712 X SF1FSF
FRANCE ECA113 X4F, 215F, 52x SF|440FSF
CANADA112X254, 3/81,0025¢$1,00$4,00
‘swiSstAF, SF1FSF
‘SWISS?AF, 7ISF1FSF
swiss3AIF, BISE\1F|
ITALY1/500LIRE500 IRE‘500 LURE,
UKt ECA4150P, 3/61Ey)20PSOP10P
URQECA‘yS0P, 2/61Fa20P50P10P
UK3 ECA1130, 2/50P, 5i€1a20PoP10P
Ka4150P, 3/64et‘s0P
UKS+s0P, 2/84GlSOP
SPAINT{MOOPESETA, 6/S00PESETA100PESETSOOPESET
SPAINZ___|_1N00PESETA, SISOOPESETA400PESET‘SCOPESET,
‘AUSTRALIA113X204, 2181.0020¢1.00
AUSTRALIA2118x204, 1181.0020¢$1.00
JAPANI4/M00YEN,100 YEN100 YEN
JAPAN22i00YEN100 YEN100 YEN
AUSTRIASISSCHIL, 210SCHIL5 schiling10 schiting
AUSTRIA12X5SCHIL, YV2X10SCHIL.Sschiting |40 schiing
BELGIUM!1120F20F20F
BELGIUM23720F20F20F
BELGIUMS2/2020F20F
BELGIUM ECA| ae_|_s0SF206
‘SWEDEN413X1KRONA, 2/5KRONA4 KRONA,5 KRONA
NEW ZEALAND‘4/axz0920820¢
NEW ZEALAND2Z112X20620¢20¢
NETHERLANDSJGUILDER, 3/2. SGUILDERT[reunpen25GUILDER
[LewtanoAIMARKKAIMARKKA | _MARKKA
NORWAY412X1KRONE, 3/5X1KRONE4KRONEKRONE
DENMARK412X1 KRONE, SKRONE, 7/2XSKRONE11 KRONE,S KRONE,
ANTILLES(25g, 4GUILDER256JGUILDER
HUNGARY4/2X10FORINT, 3/2X20FORINT40FORINT,2oFoRNT_|

1-20

Page 26

Custom Pricing

(1)

(2) (3) (4) (5) (6) (7)

(8) (9) Coins inserted accumulate units. This adjustment specifies the number of units given for each coin in the left, right, 3rd, 4th, or bill validator chute (see "units/credit"). This is the number of coin units required to buy one credit. One bonus credit is awarded after this many coin units have accumulated. No credits will be awarded until this many coin units have accumulated. Each player needs this many credits to begin a game. Each player needs this many credits to continue a game. Whenever standard pricing is used, a corresponding message is displayed on the credits screen. Setting this to no disables the message. When set to yes, fractional credits will be seen on the credits screen. The detailed bookkeeping screen shows total collections based on this many coins per dollar. (Set to zero to disable the display of money totals.)

  • This is the limit for the credits counter. Additional coins inserted will be lost. Factory setting is 30.

1-21

Page 27

UTILITIES The Utilities Menu allows the owner/operator to clear the games bookkeeping memory and to install a custom message. Highlight selection with any joystick, then press any button to lock setting.

After an item has been activated, you are given the option of resetting that item or not. For example:

CLEAR CREDITS ARE YOU SURE?

YES NO

Highlight setting choice with any joystick, then press any button to lock setting and return to the Utilities Menu.

1-22

Page 28

HARDWARE INFO Displays the name of the game, the serial number and manufacture date.

WWF UNIT

SERIAL NUMBER: XXXXXXK

DATE OF MANUFACTURE: MONTH DAY, YEAR

Press any control panel button to exit to the main menu.

REAL TIME CLOCK Display or set the current time and date.

Main Test Menu

ADJUST VOLUME Move the joystick up to increase, or down to decrease the sound level of the game. Press any control panel button to lock the volume level and return to the Main Menu.

Press any control panel button to exit to the main menu.

1-23

Page 29

Troubleshooting

PROBLEM

NO PICTURE OR DISTORTED PICTURE.

TURN GAME ON & NOTHING HAPPENS.

NO SOUND.

NO GENERAL ILLUMINATION

PRESS START BUTTON AND NOTHING

HAPPENS.

NO CREDIT GIVEN WHEN COINS ARE

INSERTED.

TOO MANY CREDITS FOR NUMBER OF COINS

INSERTED.

GAME STAYS IN THE TEST MODE.

POSSIBLE SOLUTION

Check for faulty video board or monitor. Check for

disconnected video signal cable.

Check line fuse. Check for +5VDC at pins C, D, 3,

and 4 of the JAMMA Connector.

Check the speaker and speaker connection to pins Land 10 on the JAMMA Connector. Check volume

control setting. Check for +12VDC at pins F and 6

on the JAMMA connector, also -5VDC at pin 5.

Check interboard wiring on CPU Board.

Check cabinet wiring for open connections to G.\. bulbs. Check G.I. fuse, if present.

Check for open wires between the button and CPU

Board. Check for contamination on CPU Board

Pins or the button switch blade contacts. Check for

proper ground.

Check for contamination on coin switch contacts.

Check for an open wire between Coin Switch 1 and

pin 16 on the JAMMA Connector or Coin Switch 2

and pin T of the JAMMA Connector.

Check Game Pricing setting. Check for a Short

between pins T & 16 on the JAMMA Connector.

Check that the Test Switch in the coin door and the

Test Switch (Position 1) on DIP Switch 2 are set to

Off.

1-24

Page 30

WWE

WrestleMania

KIT

SECTION

TWO

Parts Information

Page 31

Decal Set 31-2307-1

O Oxe) OO © —_ Veg Sot), C) [ OES

=

WWF Kit Control Panel Housing Decals 31-2307-2

WrestleMania Logos 31-2307-3 | LIS

WWF Large Logo 31-2307-4 WWF Medium Logo 31-2307-5

2-2

Page 32

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 33

A-20276-40030 WWF Unit Final Assembly

[TTEM | WILLTAMS NUMBER | DESCRIPTION oc ory

1 | 5880-14056-00BATTERY 3V_LITHIUMBLi

2 | a-20093 ASSY GAL 20V8 24PDIPN 25nS | Us? | 1

3 | #20019ASSY PIC 1657 _28PDIPW6d [1

4 | A-20095. ASSY PLD 7032 44PLCC__15nS_ | U35 | 1

5__|A-20273ASSY PLD 7064 64PLCC_15nS_|U45 [1
6 | A=e0249ASSY PLD 7064 64PLCC__15nS_[47 [1
7_|A-5343-40030-02 | ASSY EPROM WWF MUSIC/SPCHue ft

—8 | A=5343-40030-03 [| ASSY EPROM WWF MUSIC/SPCH us fF 1_|

9 | A-5343-40030-04 | ASSY EPROM WWF MUSIC/SPCHua[1

10 | 4-5343-40030-05 | ASSY EPRIM WWF MUSIC/SPCH ust

[15 | A-5343-40030-06 [ ASSY EPROM WWF GAME IMAGE | U133/ 1 16 | A-5343-40030-07 | ASSY EPROM WWF GAME IMAGE use] 1 17 | 8-5343-40030-08 | ASSY EPROV WWF GAME IMAGE | Ul3i| 1 18__| A-5343-40030-09 | ASSY EPROM WWF GAME IMAGE | Ui3o| 1] 19 | A-5343-40030-10 | ASSY EPROM WWF GAME IMAGE uies| 1]

20 | A=5343=40030-11_|ASSY EPROM WF GAME IMAGEuieet

21 | -5343-40030-12 | ASSY EPROM WWF GAME IMAGE ule7| 1

22__|A-5343-40030-13 | ASSY EPROM WWF GAME IMAGEweé| i
23__|A-5343-40030-14 | ASSY EPROM WWF GAME | MAGEules] 1

24 | A-5343-40030-15 | ASSY EPROM WWF GAME 1 MAGE vied] i

25__|A-5343-40030-16 | ASSY EPROM WWF GAME 1 MAGEules] 1

26 | A-9343-40030-17_| ASSY EPROM Ww _GAME IMAGE weelT_| 27 | A-5343-40030-18 | ASSY_EPRUM WWF GAME IMAGE wer fi | 28 | A-5343-40030-19 | ASSY EPROM WWF GAME IMAGE ued | 1 _| 9 | a-5343-40030-20_| ASSY EPROM WF GAME [MAGE ul9 30__ | A=5343-40030-21 | ASSY EPROM WF GAME IMAGE wis] i

47__ | A=5343-40030-22 | ASSY EPROM WWF PROGRAMus¢[1
[4g[A-5343-40030-23 | ASSY EPROM WwW PROGRAMU63 | 1

2-4

Page 34
Scan of page 34

This page is a drawing, shown as the original scan.

Page 35

JAMMA CHART

FunctionWire ColorPin’PinWire ColorFunction
GroundBlack1A | BlackGround

Ground Black 2 B Black Ground

+5 Volts DCRed3Cc | Red+5 Volts DC
+5 Volts DC.Red4DRed+5 Volts DC
5 Volts DCYellow5Ee [Yellow__| Svats Be

-+—_—-

+12 Volts DCOrange6‘F | Orange+12 Volts DC
KeyaHKey
Counter 4Brown8|J| Brown-RedCounter 2
NC9KNC
‘Speaker (+)Red-Gray10L | Brown-Gray‘Speaker (-)|

NC 11 L M | NC

| Video RedRed12NGreenVideo Green
Video BlueBrown13 |P= | WhiteVideo Sync
Video GroundShield14 T R_ | White-GrayService Credit
TestBlack-Blue15S|White-GreenSlam Tilt|
1 CoinBlack-Brown16 |T | BlackRed2 Coin
1 StartWhite17UViolet-White2 Start
1 UpWhite-Black18V_ | Violet-Black2Up

-_e nl

1 Down_ | White-Brown19W_ | Violet-Brown2 Down
1 LeftWhite-Red20X | Violet-Red2 Left

—}. 1 Right White-Orange | 21 a Y | Violet-Orange | 2 Right

4 PunchWhite-Yellow | 22ZViolet-Yellow2 Punch
1 Defense\ White-Green23a | Violet-Green | 2 Defense
1 Power Punch_| White-Biue24Violet-Blue2 Power Punch
Not UsedWhite-Violet25c | Violetam Not Used
NC26dNC
  • {
NC27eNC
GroundBlack28fBlackGround

3-2

Page 36

INNERBOARD WIRING

—]

eu a tea

Te

bh aeunes xx mut cRFen [| a mS zm u-eRom ESB AE see Se a 2am st Pox

A-20276-40030 UNIT FINAL ASSEMBLY

*These wires are not included in the wiring harness. They are shown here so that the operator can utilize these funtions if installing a kit.

3-3

Page 37

CABINET WIRING DIAGRAM

SuBwW3dS ONV SUTIN s “SBHOLIMS 1S31/3OIAN3S TL 4000 NIOO OL

davag nd Wo [dAL> T3NVd WAaLNOD = ie ne : 1 if 8? es , — : rr oo HOTT ET ——s oma eee s— we BY q a

3 r @ YBAVId } tom a ar WYSOV IC ONIAIM LID —— nee eC — re et sia —a ee a ras. ge eas InmenotiGdase OE U0 3S {pet ae | a Vv JaINO3S SHDLINOW JVALS 3WOS: et Ana tne * Natta 3 ~ rims no) E cook ers »

we —— eo 2 ag Se | ane YVINVAS ILS SSM ahh aI

=e

3-4

Page 38

COIN SWITCH AND METER WIRING

OPTION 1

GROUND COIN SWITCH 1 ae — $a ° | 45V COIN SWITCH 2 | 2 _ —_ ME AMMA PIN 16 Ld

JAMMA PIN 8 oa $$

OPTION 2

COIN Switch 1 ~~ —— a oad JAMMA PIN 16. +5V

COIN SWITCH 2 oA. ~ - _ JAMMA PIN. T |orouno JAMMA PIN 8 ae L— a

NWRONG WAY! Do not connect the coin switches in this manner. This circuit is INCORRECT, and will cause twice as many credits per coin.

COIN SWICH 1 9 _ JAMMA PIN 16 COIN SWITCH 2 on L r _— JAMMA PIN T GROUND ns od

Page 39

3-6

Page 40

wu an ay —_————— 3 3

~—9

1 na DIA. THRU

at

ot I 1 3/16 DIA. THRU.

|-—_ 2___| —| 19/32 |} | 1B (6 PLACES)

3/16 DIA. THRU. 2 9/16 ——+| (4 PLACES)

Page 41

1} Ci) 1 1/4” DIA. THRU

foe) |. 2 1 3/16 DIA. THRU. —] 1 «9/32 | 8 (6 PLACES)

3/16 DIA. THRU. 2 9/16 ——_+| (4 PLACES)

Page 42

WARNINGS & NOTICES

Warning USE OF NON-MIDWAY PARTS OR CIRCUIT MODIFICATIONS MAY CAUSE SERIOUS INJURY OR EQUIPMENT DAMAGE! USE ONLY MIDWAY AUTHORIZED PARTS.
  • For safety and reliability, substitute parts and modifications are not recommended,
  • Substitute parts or modifications may void FCC type acceptance.
  • This game is protected by federal copyright, trademark and patent laws. Unauthorized modifications may be illegal under federal law. This also applies to MIOWAY logos, designs, publications and assemblies. Moreover, facsimiles of MIDWAY equipment (or any feature thereof) may be illegal under federal law, regardless of whether or not such facsimiles are manufactured with MIDWAY components.
Warning
NOTE: This equipment generates, uses and can emit radio frequency energy and, if not installed properly and used ; according to the directions in this manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of part 15 of FCC rules which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference to radio communications, in which the user, at his or her own expense, will be required to take whatever measures may be needed to correct the interference.
Warning Prevent shock hazard and assure proper game operation. Only plug this game into a properly grounded outlet. Do Not use a cheater piug to defeat the power cord's grounding pin, Do not cut off the ground pin.

NOTICE - FCC COMPLIANCE STICKER

|. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135), THE FCC COMPLIANCE STICKER (16-9306) SUPPLIED IS TO BE PLACED ON THE REAR OF THE CABINET.

Il. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT GUARANTEE COMPLIANCE WITH

FCCREQUIREMENTS.YOUARESOLELYRESPONSIBLE,ANDMIDWAYWILLHAVENO

RESPONSIBILITY FOR FCC COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

Notice No part of this publication may be reproduced by any mechanical , photographic, or electronic process, or in the form of a phonographic recording, nor may be transmitted, or otherwise copied for public or private use, without permission from the publisher.

For Service: Cail your Authorized MIDWAY Distributor.

“Doink the Clown Theme Music”“Razor Ramone Theme Music”“Bam Bam Bigelow Theme Music
Composed by James Johnston‘Composed by James Johnston‘Composed by James Johnston

Performed by James Johnston Performed by James Johnston “Shawn Michaels Theme Music” “WWF Superstars” “WWF Challenge”

Composed by James Hart & J.J. MaguireComposed by James JohnsionComposed by James Johnston
Performed by James Hart & J.J. MaguirePerformed by James JohnstonPerformed by James Johnston
“The Undertaker Theme Music”“Lex Luger Theme Music"“Bret Hart Theme Music”
Composed by James JohnstonComposed by James Johnston‘Composed by James Johnston
Performed by James JohnstonPerformed by James JohnstonPerformed by James Johnston

“Yokozuna Theme Music” “Monday Night Raw" “Action Zone”

Composed by James JohnstonComposed by Roger TallmanComposed by Roger Taliman
Performed by James JohnstonPerformed by Roger TallmanPerformed by Roger Tallman

Courtesy of Titan Sports Inc. Used by Permission - All Rights Reserved

MIDWAY MANUFACTURING COMPANY 3401 N. CALIFORNIA AVE. CHICAGO, ILLINOIS 60618

Entire contents of this manual copyright © 1995 MIDWAY Manufacturing Company. All rights reserved.