CATHODE RAY TOMES

1000 in 1 Baby Star P4-4P

Baby Star P4-4P (Baby Star) · Manual · 11 pages · 7 sections · original scan

Page 1

SYSTEM USER MANUAL

wee = Inorder fo understand the function of this syster comp'etely,please have athrough reading of this menual

Page 2

CATALOG

  • FEATURE INTRODUCTION 2
  • PARTS LIST..........cccessceesersceesseeseeeeneeneeeeeseeeseaeeaenean 3
  • SYSTEM ASSEMBLY........:::cccseccersseeerneeeeeeceteee seer ee 3
  • SYSTEM OPERATION...........:ccceeeeeeeeeeeee enone ee ee eee enees 4
  • SYSTEM SETTING........000:c cesses eerseeeeteneeeeeereeeee erences 5
  • COIN AND CREDIT VALUE SETTING TABLE.
  • SYSTEM FUNCTION SETTING TABLE
  • VIDEO OUTPUT MODE SETTING.
  • GAME LIST HIDE/SHOW.
  • SAVE MODIFIED GAME LIST..........+-..0seeeneeeee see tee eee 8
  • ONE GAME BUSINESS MODE.........:.05.:eseesseeee seer neers 9
  • DELETE GAME FROM GAME LIST.........---2eceseseeeeeeee 9
  • ADD GAMES FROM ALL GAME LIST

TO ONE OF GAME LISTS

14, LANGUAGE SETTING.....

15, NEW GAMES UPDATE...

  • HARD DISC DATA LOST RETRIEVE :
  • GAME CONFIGURATION SETTING. .........--222000eeseeeees 12

Type 1: Original setting is on screen setting mode..............+12 SAVE MODIFIED GAME CONFIGURATION SETTING...... 13

Type 2: Original setting is DIP SW setting mode...............0++ 14 Type 3: Special setting MOde............:cseeeseeeeeeeetee teeter ees

  • CHANGE 2P or 4P PLAY MODE.
  • TROUBLE SHOOTING.........-
  • JAMMA CONNECTOR PIN OUT DEFINITION.
Page 3

understand this system operation, we hope you read this manual detail.

BABY STAR USER MANUAL (4P)

Thank you for purchasing this product. For your convenient to

FEATURE INTRODUCTION: 1.

wR

10. IL. 12. Protect JAMMA I/O from damage of incorrect connection Use P4 motherboard, Intel Celeron4 CPU, 40G Hard Disc, 256M DDR. Installed multi game emulators software. Allow coins inserted before game selection. After power on player can insert coin at any time Support 4 people play mode. . Support one game / multi games business mode. Support 3D games. Support video mode: VGA (31 KHZ), NTSC (15KHZ), PAL (1SKHZ), SEGA (24KHZ). Support two-channel stereo audio. Faster I/O response and more stable system operation. Classified all games to Stage, Flying/Shooting, Wrestle/Fighting, Maze/Puzzle, Adult, Sport, Misc./Others, and Special/Classical game list. . Each game list can be hided or showed.

  • Each game in list can be deleted or called back. . Support simple Chinese and English. . Game configurations are adjustable. . Support coin counter.
  • Set all games coin and credit value by one DIP SW.
  • One touch key can retrieve data automatically when Hard Disc data lost.
  • Support new games update. PARTS LIST: Baby star mainboard. (Double deck). 3&4p connector board with a Cable wire. A/V wires. (8 wires for 3&4P audio and video input). 5 line wires, (For 1P&2P shooting button 5"& 6"). ATX power supplier with an AC power wire.
  • User manual. VPON Er

Suggestion: If you need to deliver this product to your customer please mind keeping the cushion package box complete to avoid the HARD DISC damaged.

SYSTEM ASSEMBLY: ;

  • Finish each parts connection as the picture below (Figure 1): _ZA) bottom | BUTTON 6 ae 6 g MAIN BOARD 5 buttons a § IPBUTIONS an we

TO MACHINE 1

JAMMA

[BIE | rowEr CONNECTOR | 2oPDr

TX POWE SUPPLIER TO AC POWER

(Figure 1)

Page 4
Warning: Use a wrong A.C. power input or connect the mainboard with JAMMA slot opposite direct would destroy power supplier or mainboard seriously. 2.Two channel stereo audio circuit (Figure 2):

COUNTER JAMMA SOLID SIDE 100

IT] JAMMA PART SIDES 012343) JAMMA PARTS SIDE 10 G+) [| Hv WoC: +59

TWO CHANNEL STEREO AUDIO CIRCUIT (Figure 2)

  • Counter connect circuit (Figure 2.1) (Figure 2.1)

SYSTEM OPERATION:

  • Switch on machine power and ATX Power Supplier (DO NOT press switch bottom of mainboard. The system will start automatically in 3 seconds). After 90 seconds game list will shows

on screen

  • Insert coins first and than select game. (It also could be adjusted to insert coins after game select. Please see SYSTEM FUNCTION

SETTING TABLE on page 5.)

  • Select game name by moving 1P joystick. Press 1P Start Button to start game mode.
  • Escape from game mode to game list by pressing 1P Start Button (or pressing 1P start and A button, Please see SYSTEM FUNCTION SETTING TABLE on page 5.) for 3 seconds.
  • Change game list by pressing 1P button A or B. SYSTEM SETTING COIN AND CREDIT VALUE SETTING TABLE:

SW1: oe SWI

COINCREDLI7;;;
1 COIN| 1 CREDIT |OFFOFFOFF
1 COIN | 2 CREDITS |ONOFFON
1 COIN | 3 CREDITS |ON0OFF
1 COIN | 4 CREDITS |ONONON
2 COINS | 1 CREDIT|OFFOFFON
3 COINS | 1 CREDIT|OFFONOFF
4 COINS | 1 CREDIT |OFF0ON

(TABLE 1) SYSTEM FUNCTION SETTING TABLE Sa: SWITCH POSITION

FUNCTIONmen 4}3)2L

GAME MODE OFF SETTING MODE ON MULTY GAME MODE OFF SINGLE GAME MODE ON PRESS IP START OFF EXIT BUTTON ONLY OPERATION| PRESS IP START oN AND BUTTON A BEFORE OFF INSERT |_GAME SELECT

EUs GAME SELECT ON

(TABLE 2) VIDEO OUTPUT MODE SETTING:

  • Switch ON bit 4 of SW2 (Figure 3).
Page 5

TO MACHINE 1

JAMMA

(Figure 3)

  • Press VIDEO key (Figure 4), video output made will be changed as below: VGA-’NTSC =’ PAL= SEGA —’ VGA roa) ce) IcRORORO

*] fe

  • Switch OFF bit 4 of SW2. P 3&4P CONNECTOR BOARD oO ie]

(Figure 4)

GAME LIST HIDE/SHOW

  • Switch ON bit 4 of SW2 (Figure 3).

Bagman Crazy Kong Crazy Kong<Jeutel bd Donkey Kong 3<US> Donkey Kong Jr.<boo] Dr. Micro Explorer Galaga ‘88 <Jopan> Trun 1P joystick up ordown to select games orderly Lelt or right to by pége4P A or Bto change game ist 1P STARTto START for 3 seconds to exitfrara game. (Figure 5) Keep system working at game list (Figure 5). Press SETUP key (Figure 6) to entry “System Setting” menu (Figure 7). won

Corrales)

SETUP | [= (i 3&4P CONNECTOR BOARD © © MTT VUVAUNUAUATTTNTNTTIAY

  • Select “Game List Setting” item by 1P joystick (Figure 7) and press 1P START button to entry “Game List Setting” menu (Figure 8).

Back to Main Menu |

(Figure 7) (Figure 8)

  • Select “Show/Hide Game list” item by 1P joystick (Figure 8).

show 7) (ESSE Hide C1

(Figure 9) (Figure 10)

  • Press 1P START button to entry “Show/Hide Game List” menu

Fi 9). (Figure 9). oy.

Page 6

Select game list item by 1P joystick and press 1P START button to decide show or hide. Dark square means show and light square stands for hide. After finish all game lists Show or Hide setting, select “Exit” (Figure 9) and press 1P START button to back to “Game List Setting” menu (Figure 10).

(Figure 11) (Figure 12)

  • SAVE MODIFIED GAME LIST*
  • Select “Save Current Game List” item (Figure 10) and press 1P START button twice to save game list (Figure 11).
  • Select “Back to Main Menu” (Figure 12) and press 1P START button to back to “System Setting” menu (Figure 13).

(Figure 13) (Figure 14)

  • Select “Exit” (Figure 13) and press 1P START button to back to game list (Figure 14).
  • Switch OFF bit 4 of SW2.
Note:
  • Working list can’t be hided.
  • “Restore Game List” (Figure 12) means to get back the older game list.
  • “Restore Default Game List” (Figure 12) means to retrieve to factory game list setting. ONE GAME BUSINESS MODE:
  • Select a favorite game and entry to game mode.
  • Switch on SW2 bit 3 (Figure 15).
  • “Escape to game menu” function will be disabled.

ze » (ti + a

JAMMA

TO MACHINE 1

WE

(Figure 15) DELETE GAME FROM GAME LIST

  • Switch ON bit 4 of SW2 (Figure 3).
  • Select the game name that will be delete at game list (Figure 16) and press DEL key (Figure 18). The game will disappear from game list (Figure 17).

Donkey Kong 3 Donkey Kang Jr.<boo!l

8 erdelyLef er ightto game ist P START te

(Figure 16) (Figure 17)

Page 7

3&4P CONNECTOR BOARD

{e) TTT ce 1

Press SETUP key (Figure 6) to entry “System Setting” menu (Figure 7). Select “Game List Setting” item (Figure 7) and press 1P SART button to entry “Game List Setting” menu (Figure 10).

  • Execute step 6 to 9 operations on page 8. ADD GAMES FROM ALL GAME LIST TO ONE OF GAME LISTS Switch ON bit 4 of SW2 (Figure 3). Press LIST key (Figure 19) to entry game lists menu (Figure 20). Select “All Games” and press 1P START button to entry “All” game list (Figure 21).
  • Select a favorite game (Figure 21) and press “ADD” key (Figure
  • to entry game lists menu (Figure 22). Select a destination game list and press 1P START button (Figure 22). The game will be added to the game list (Figure 23).
  • Press SETUP key (Figure 6) to entry “System Setting” menu (Figure 7). Select “Game List Setting” item (Figure 7) and press 1P SART button to entry “Game List Setting” menu (Figure 10).
  • Execute step 6 to 9 operations on page 8. nm

we

wn

~

OF J) Les jO ADIXUST °j 2) fe 3&4P CONNECTOR BOARD [=] [fe ie) PMN] (Figure 19) BWings <Japen> Back Street Soccer Bad Dudes vs. Drago

Moon Alien Par McKougar Teun tPjoyntickupe right to J trun 1P joystick up or down to solect games ordertyLeftor right to by page.ir nor vocnenge game st1P START to elect games by page.tP A or Btochange game fst. 1P STAR™ to Hold 1P START for 3 seconds toexitfrom game launch game Hold 1? START for 3 seconds to exitfrom game.

B.Wings <Japar Back Street Soc is. Donkey Kong 3<US> Donkey Kong sr.<bo% Or. Micra Explorer Galaga 83 <Japan> ean 1 joystick up or caw to select games ordery.Left or right to select gimes by pagetP A or Btochange gane st 1P START to ch game Hold 1? START for3 seconds to axitfrom game.

(Figure 22) (Figure 23) LANGUAGE SETTING:

  • Switch ON bit 4 of SW2 (Figure 3).
  • Press SETUP key (Figure 6) and select “Language Setting” item (Figure 24).
  • Press 1P START button to change language from English to simple Chinese or simple Chinese to English (Figure 24,Figure 25).
  • Switch OFF bit 4 of SW2.

(Figure 24) (Figure 25)

Page 8

NEW GAMES UPDATE: About new game update information please ask to vender. We'll deliver new games and tools to all of our venders when new games

announce.

HARD DISC DATA LOST RETRIEVE:

  • Switch ON bit 4 of SW2 (Figure 3).
  • Power ON and click 2P START button discontinuously until retrieve program working. About 20 minutes later, hard disc will retrieves its data we automatically.
  • Switch OFF bit 4 of SW2.

GAME CONFIGURATION SETTING: Type 1: Original setting is on screen setting mode. (Example: SNK NEO GEO, CAPCOM CPSII serial etc).

  • Switch ON bit 4 of SW2 (Figure 3).
  • Select the game that will be set (Ex. Metal Slug 3) and start the game (Figure 26).

HARDWARE TEST SETTING UP THE HARD DIP SETTING UP THE SOFT DIP BOOK KEEPING SETTING UP THE CODE NUMBER SETTING UP THE CALENDAR EXIT 7/23/ 5 SAT

(Figure 26) (Figure 27)

  • Press ADJ1 key (Figure 28) to entry the game original setting mode (Figure 27). 3&4P CONNECTOR BOARD

(e)

(Figure 28)

  • After finished the game setting and exited to the game mode (Figure 26), press ESC key (Figure 28) to back to game list (Figure 29).
  • Some of games will appears the dialog window (Figure 30) after press ESC key (Figure 28), please select “Quit Game” item by 1P joystick and press 1P START button to back to game list (Figure 29).

Save State Load State Mercs <uS> Record Movie ioast 3a: fo Be | stop seca sophia Nesifaea 4 Pp recording n. ybac! Ser . Transparency Metal Slug 5 Cheats Metal Slug X - Shots factory Machine Settings Memory Card Settings

(Figure 29) (Figure 30) *SAVE MODIFIED GAME CONFIGURATION SETTING* 6. Press SETUP key (Figure 28) to entry “System Setting” mode (Figure 31). Select “Config Files” item (Figure 31) and press 1P START key to entry “Config Files” menu (Figure 32).

Page 9

(Figure 31) (Figure 32)

  • Select “Save Configuration” item (Figure 32) and press 1P START twice to save modified configurations (Figure 33). 9, Select “Back to Main Menu” (Figure 32) and press 1P START button to back to “System Setting” (Figure 31).
  • Select “Exit” (Figure 31) and press 1P START button to back to game list (Figure 34).
  • Switch OFF bit 4 of SW2. ace =>

Metal Slug 3, Hetal Slug 4 Motal Slug 5 Netal Slug X- Super \ rly Left or right to a8. AP START 10

(Figure 33) (Figure 34) Type 2: Original setting is DIP SW setting mode. (Example: CAPCOM CPS1 serial etc).

  • Switch ON bit 4 of SW2 (Figure 3).
  • Select the game that will be set (Ex. Street fighter ID’) and start the

game (Figure 35). (Figure 35) (Figure 36)

  • Press ADJ2 key (Figure 28) and select “Dip Switches” by 1P joystick (Figure 36).
  • Press 1P START button to entry configuration setting menu (Figure 37). Select setting item or modify setting by moving 1P joystick left or right (Figure 37).
  • After setting modified, select “Return to Main Menu” (Figure 38) and press 1P START button to back to main menu (Figure 39).
  • Select “Return to Game” (Figure 39) and press 1P START button to back to game mode (Figure 35).
  • Press ESC key (Figure 28) to back to game list (Figure 29).
  • Some of games will appears the dialog window (Figure 30) after press ESC key (Figure 28), please select “Quit Game” item by 1P joystick and press 1P START button to back to game list (Figure 29).
  • Operate step 6 to 11 on page 13for saving the game configuration setting (Figure 33). Cre Coin A 1 Coin/1 Credit
Coin BCCrecitCoin B1 Coin/L Credit
2 Coins to Start, 1 to ContinueOff2 Coins to Start, 1 to ContinueOff
UnusedOffUnusedOff
Difficulty2Difficulty6

Free Play Off Free Play Off

FreezeOffFreezeCff
Flip Screen.OffFlip ScreenOff
Demo SoundsOnDemo SoundsOff
Allow ContinueNoAllow Continue
Game ModeGameGame Mode

Retum to Main Menu E

(Figure 37) (Figure 38)

Page 10

Input (general ) Inpat (this game ) Custom Buttons Autofire Setting Dip Switches Bookkeeping Info Game Information Game Documents Reset Gam et u (Figure 39) (Figure 40) Type 3: Special setting mode (Example: NAMCO SYSTEM 1 serial tc) @

  • Switch ON bit 4 of SW2 (Figure 3).
  • Select the game that will be set (Ex. Tank Force) and start the game (Figure 40).
  • Press ADJ2 (Figure 28). 4, Select “Dip Switches” item (Figure 40) and press 1P START

button. GAME OPTIONS wos i @dbey bi tiaad £ SR2Bx1 ATTRACT SOUND ON WE B (vs UP.> SCREEN FLIP OFF FREE PLAY = OFF TANKS LEFT = 2 DIFFICULTY VERY HARD

(Figure 41) (Figure 42) Select “Service Mode” item and set “On” by moving 1P joystick w left or right (Figure 41).

  • Press ADJ2 key (Figure 28) to close the current setting window and modify configuration setting by 1P joystick (Figure 42). After finished all configurations setting, press ADJ2 key (Figure
  • and set “Service Mode” Off (Figure 43). x Return to Main Menu

(Figure 43) (Figure 44)

  • Press ADJ2 key (Figure 28) to delete the small setting window (Figure 44).
  • Press ESC key (Figure 28) to back to game list (Figure 29).
  • Operate step 6 to 11 on page 13 for saving the game configuration setting (Figure 33).

CHANGE 2P or 4P PLAY MODE:

  • Switch ON bit 4 of SW2 (Figure 3). Press MODE key (Figure 28) to change 2P or 4P mode. Switch OFF bit 4 of SW2 (Figure 3). enter any game and play once then exit from the game to the game list ,It will save the setting. fer

TROUBLE SHOOTING Q&A: Q: Pressed 1P START button for 3 seconds but still can’t escape to game list. A: Switch off SW2 bit 4 and bit 2. Q: 3&4P connector board doesn’t work. A: Switch ON SW2 bit 4. Q: System can start but can’t entry game mode. A: Execute “HARD DISC DATA LOST RETRIEVE” on page 12. Q: After power on around 2 minutes, the picture still got messy (no synchronous).

Page 11

JAMMA CONNECTOR PIN OUT DEFINITION: Az It might be got a wrong video output mode, please change video

output mode to be PAL or NTSC. (See page 6 “VIDEO OUTPUTSOLID SIDEPART SIDE
MODE SETTING”.)GNDLA]GND
Q: During 3P and 4P are playing, video mode always be changed.GND|B]2GND
‘A: Check bit 4 of SW2 whether it’s set at ON position, please set it at+5VLc3+5V
OFF position after corrected video output mode.+5V| Di4+5V
Q: After power on, press the switch bottom of mainboard, system can’tN-C-E5N-C-
start and the fan have no rotation.+1ey:6+12V)

; ’ a KEYNOPIN | H | 7 KEY NO PIN

‘A: After switch machine power on, DO NOT press switch bottom ofNC:lg | 8| COIN COUNTER |
mainboard. The system will start automatically in 3 seconds.N-C:|K9N-C-
Q: Changed 2p or 4p playing mode but can’t keep playing mode afterRIGHT|L | 10 | LEFT SPEAKER
A: After mode changed, please excuse any game and then exit fromVIDEONWVIDEO RED

the game to the game list. GREEN

Q: When connected 2 machines for 4 people playing, one of theVIDEO SYNC | P | 13VIDEO BLUE

chassis always be destroyed, why? Ne 3 4 Ne

‘A: Please install transformer into machine to isolate A.C. power ofCOIN 2T | 16COIN 1
chassis with another one.2P STARTU | 17IP START
2P UPV_|181P UP
2P DOWNWw | 191P DOWN
2P LEFTX_|201P LEFT
2P RIGHTY | 211P RIGHT
2P SHOOT 12 | 221P SHOOT 1
2P SHOOT 2a_|231P SHOOT 2
2P SHOOT 3b | 241P SHOOT 3
2P SHOOT 4c | 251P SHOOT 4
2P SHOOT 5d | 261P SHOOT 5
GNDe | 27GND|
GNDft28GND