Eco Fighters
Eco Fighters (World 931203) (Capcom, 1993) · Manual · 16 pages · 15 sections · original scan
MANUAL
WARNING
This game is for use in the United States of America and Canada. Sales, export or operation outside of these countries may be construed as copyright and trademark infringements and is strictly prohibited. Violators are subject to severe penalties and will be prosecuted to the full extent of the law.
@ 19-0015
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
XN
"WINNERS DON'T USE DRUGS"
Louis Freeh, Director, FBI
« IN COOPERATION WITH THE AAMA AND FBI ANTI-DRUG CAMPAIGN +
CAPCOM
INVITES YOU TO USE
OUR SERVICE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER CAPCOM GAME YOU NOW HAVE ON LOCATION. PLEASE HAVE GAME SERIAL NUMBERS AND CABINET NUMBERS READY.
CALL US FOR PROMPT, COURTEOUS
ANSWERS TO YOUR PROBLEMS.
DIRECT NUMBER _ 1-800-833-0190
CAUTION
Please keep the following instructions to keep the PC board in good condition
e Do not block the ventilation slots.
© Do not drop or bump the board.
e Do not spill any liquids on the case.
e Do not disassemble the case.
ATTENTION
battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste system. Check with your local solid waste official for details in your area for recycling options or proper disposal.
as The product that you have purchased contains a rechargeable battery. The
DISASSEMBLING THE CASE OR REMOVING THE STICKER MAY CAUSE THE TERMINATION OF YOUR REPAIR WARRANTY.
PARTS LIST
There are two different kits available for Eco Fighter. The first kit below is the full kit which includes PCB, all necessary graphics, buttons, joysticks and a volume/test bracket. This kit is used for a cabinet that will be upgraded with the CPS II board for the first time. The second kit is called the "B" Kit. This kit is for any that already uses the CPS II board (Super Street Fighter II). This kit includes the "B" board, all necessary graphics and volume/test bracket. You just remove the top cartridge off the motherboard and replace with the new cartridge.
EF1000 Eco Fighter Kit
Part No. Description Qty.
| EF1400 | Eco Fighter PCB | 1 |
| GE3080 | Blue Marble Overlay | 1 |
| 06-0061 | Eco Fighter Marquee | 1 |
| GE1200 | Monitor Card | 1 |
| 16-0130 | 1 Player Button | 1 |
| 16-0131 | 2 Player Button | 1 |
| 16-0133 | Red Button | 2 |
| 16-0136 | Green Button | 2 |
| 16-0134 | Blue Button | 2 |
| GE2030 | Joystick | 2 |
| 06-0045 | Side Graphics | 2 |
| 03-0050 | Volume/Test Bracket | 1 |
| 19-0015 | Eco Fighter Manual | 1 |
| 06-0068 | Instruction Decal | 1 |
EF1000B Eco Fighter B Kit
Part No. Description Qty.
| EF1400B | Eco Fighter "B" Board | 1 |
| GE3080 | Blue Marble Overlay | 1 |
| 06-0061 | Eco Fighter Marquee | 1 |
| 06-0068 | Instruction Decal | 1 |
| 19-0015 | Eco Fighter Manual | 1 |
CONTROL LOCATIONS
- SAMPLE CONTROL PANEL LAYOUT
MOVE MOVE eer iw @G & & PUSH 1: PUSH 2: PUSH 3: Rotate CCW Shot Rotate CW
2.. VOLUME AND TEST CONTROL SWITCHES ON BOARD
The volume of this unit can be adjusted by pressing the volume-up switch and the volume-down switch. The setting you have selected will be stored even if the power is turned off. In the event that the volume setting does not work properly, press down on either the volum-up or the volume down switch for at least five seconds, then set the volume again.
TEST SWITCH ‘VOLUME-UP SWITCH
- VOLUME AND TEST CONTROL BRACKET To be mounted on top of the coin box.
O) SERVICE =O) < fe} <2 = m
CONNECTORS
| « | JAMMA: | JAMMA 56-pin connector |
| . | OPTION: | Player 3 and Player 4 Interface |
| « | AUDIO OUT: | Used only for CAPCOM QSOUND cabinet |
| . | REGISTER: | Optional I/O connector for register |
JAMMA CONNECTOR OPTION CONNECTOR
| SOLDER SIDE | COMPONENT SIDE | 5 |
GND | A | 1 | GND 1 GND | B | 2 | GND G
| +V | Cc} | 3 | 45V | 7 | ||
| +5V | D | 4 | +5V | 19 |
Nc. | E | 5 | NC. A +12V | F | 6 | +12V 21
| H| | 7 | 2B |
Nc. | J | 8 | COUNTER1 z LOCK OUT2 | K | 9 | LOCKOUT1 3 SPEAKER Q ) | L | 10 | SPEAKER (+) 6 M|u | NC H VIDEO GREEN N | 12 | VIDEORED 4 VIDEO SYNC | P | 13 | VIDEO BLUE 16 FREECREDIT | R | 14 | VIDEOGND Fy N.C. | S | 15 | DIAGNOSIS 10 2PCOIN | T | 16 | 1PCOIN B 2P START | U | 17 | 1PSTART ct 2PUP | V | 18 | 1PUP 2% 2P DOWN | W | 19 | iP DOWN 2
| 2P LEFT | X | 20 | 1P LEFT | VOLUME UP | 29 |———o—O—+ |
2PRIGHT | Y | 21 | 1PRIGHT VOLUMEDOWN | 30 |———o—o—_] 2PPUSH1 | Z | 22 | 1PPUSH1 VOLUMECOMMON | 31 |———__~ 2PPUSH2 | a | 23 | 1PPUSH2 2PPUSH3 | b | 24 | 1PPUSH3 -_
| te | 4 | 2 | Nc | 33 | DOOooocooooooonLo | 1 |
| GND | € | van | GND | 34 | QOO0000000000000c0 | 2 |
GND | f | 28 | GND Harness Side
CONNECTOR LOCATIONS
COIN METER REGISTER
AUDIO OUT (FOR QSOUND) (RIGHT: RED, LEFT:WHITE)
JAMMA OPTION CONNECTOR
TEST MENU
The test menu allows you to test the functions and controls of the game. These items include input devices such as joysticks, buttons and coin mechs, output devices such as monitor, speakers and meters. Through the Test Menu you can also access the Configuration Menu, where you can change the settings of the game.
- ACCESSING THE TEST MENU
. For a CAPCOM cabinet, or a cabinet equipped with a test switch: Turn on the main switch, then push the test switch. The screen shown below will appear. ° For a cabinet without a test switch: Push the test switch on the side of the blue plastic electronic casing. Refer to the Controls Section of the manual.
INPUT
OUTPUT
SOUND & VOICE
COLOR
DOT CROSS HATCH
SYSTEM CONFIGURATION
OBJECT
SCROLL 1
SCROLL 2
SCROLL 3
MEMORY CHECK
EXIT 1.
2.
3.
4.
5.
6.
7.
8.
- HOWTO SELECT AN ITEM
. Use the Player 1 Joystick to Move the pound sign (#) in front of the desired item and press the Player 1 A (Rotate CCW) button. . To return to the test menu, push the Player 1 Start and Player 2 Start Buttons simultaneously. The test menu automatically appears: . After you exit the "6. SYSTEM CONFIGURATION MENU". ° After the memory is tested on the menu of "11. MEMORY CHECK".
- CLOSING THE TEST MENU
To close the Test Menu, move the pund sign (#) in front of "11. EXIT" and push the Player 1 Attack Button.
- TEST MENU ITEM DESCRIPTIONS
INPUT Used to test all the input switches. "1" appears when the switches are depressed. Check connections and switches in case "0" appears when swithces are OUTPUT depressed.
Select a code of SOUND or VOICE with the Player 1 Joystick. SOUND & VOICE Push the Player 1 A (Rotate CCW) button to hear the sound of the selected code, then adjust the volume.
Shows color bars of red, green, blue and white. COLOR Adjust RGB and brightness to obtain the optimum color balance and solid black background.
DOT CROSS HATCH Used to test the screen size, focus and distortion.
Used to change the game play settings. Refer to the SYSTEM SYSTEM CONFIGURATION CONFIGURATION MENU setion.
7, 8, 9, 10 Used to check all the characters of the game.
Used to test memory. MEMORY TEST "OK" appears when each block of memory passes test "ERROR" appears in case of malfunction. If "ERROR" appear, repeat the memory test. Contact your distributor if "ERROR" still appears.
BXIr Select this item and push the Player 1 A (Rotate CCW) button to return to game play mode.
SYSTEM CONFIGURATION MENU
- TO OPEN THE MENU
From the Test Menu, highlight "6. SYSTEM CONFIGURATION" and push the Player 1 A (Rotate CCW) button. The screen below will be displayed.
SYSTEM CONFIGURATION MENU
COIN
CONTINUE
DIFFICULTY
EXTEND
PLAYERS
SOUND
FLIP
DEMO SOUND
FACTORY SETTING
EXIT 1 COIN 1 CREDIT
ON
EASY 5 HARD
1ST 400000 PTS
2ND 800000 PTS
INITIAL PLAYERS 3
STERO (Q SOUND)
OFF
OFF
- CHANGING THE CONFIGURATION SETTINGS
Move the Player 1 Joystick UP or DOWN to highlight the desired option. Once the option is highlighted, move the Joystick LEFT or RIGHT to change the setting. Refer to menu on the next page for option settings.
- SAVING SETTINGS AND CLOSING THE MENU
Once the configuration settings are changed, save the new settings by highlighting "EXIT" and pushing the Player 1 A (Rotate CCW) button. A message "SAVING NEW CONFIGURATION IN EEPROM" appears while new settings are being saved. It takes one or two seconds to save the new settings. Do not turn off the power switch while saving is in process.
- SYSTEM CONFIGURATION MENU OPTIONS
| 1 COIN | 1 COIN | 1 COIN | 1 COIN | 1 COIN |
1 CREDIT | 2CREDITS | 3CREDITS | 4CREDITS | 6 CREDITS COIN
| 2 COINS | 3 COINS | 4COINS | | 2COINS START |
1CREDIT | 1CREDIT | 1 CREDIT |! COIN CONTINUE
CONTINUE ON OFF
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 |
EASIEST VERY EASY EASY MEDIUM
GAME DIFFICULTY
| LEVEL 5 | LEVEL 6 | LEVEL 7 | LEVEL 8 |
MEDIUM HARD HARD VERY HARD HARDEST
| EXTEND | 1ST 400000 PTS | 1ST 600000 PTS | ONLY 600000 PTS | NOTHING |
2ND 800000PTS | 2ND 1000000PTS
PLAYERS 2 3 4 5
SOUND STEREO (Q SOUND) MONAURAL
FLIP ON OFF
DEMO SOUND ON OFF
Factory settings are in bold face. After you change the setting, make sure to select "EXIT" and push the Player 1 Start button. Choose STEREO (QSOUND) if your cabinet is equipped with the Qsound Speaker System, otherwise select MONAURAL for proper sound effect.
- SYSTEM CONFIGURATION ITEM DESCRIPTIONS
COIN Sets the charge per play
Allows a player to continue playing after he loses. Extra money CONTI will need to be added to continue. ON: Continuous play is possible OFF: Continuous play is not possible
GAME DIFFICULTY The higher the number, the more difficult the game play.
Points required for extra life. ¢ 1ST 400000 PTS, 2ND 800000 PTS EXTEND © 1ST 600000 PTS, 2ND 1000000 PTS © ONLY 600000 PTS ° NOTHING
PLAYERS Number of lives.
STEREO or MONAURAL. so STEREO: with QSOUND MONAURAL: without QSOUND QSOUND is available with CAPCOM QSOUND cabinets only. For other cabinet, please set to MONAURAL
Flips the screen. If the screen appears upside down, change the setting. FLIP ON: Upside down OFF: Right side up
DEMO SOUND Turns attract sound on or off.
FACTORY SETTING To return to the factory default settings, select this item and push the PLAYER 1 START button.
Bar To save the setting changes and return to the TEST MENU, highlight this item and push the PLAYER 1 START button.
MOUNTING THE PC BOARD
- INSTALLING THE MOUNTING BRACES
4 mounting braces are included in the package
- MOUNTING THE PCB
These screws are not included in the package. ¢
HOW TO REMOVE THE TOP "B" CARTRIDGE
In the future, there will be the capability to remove the top "B" cartridge so that a game can be converted to a new game or upgraded to a different version. It is very important only to seperate the top cartridge from the main board only. Dissasembling either case will void your warranty. Follow the instructions below to seperate the two assemblies.
. Remove the 2 case clamps. ° Carefully pull the the "B" cartridge off the bottom cartridge.
Case Clamp
STICKER DESCRIPTIONS
Sealing sticker
Cartridge serial number sticker AAMA Serial number sticker Waring information sticker Reverse Side of Cartridge
=a Sealing sticker
Serial Number (bottom of case) co
Disassembling the case or removing the Main Board
sealing stickers will void your warranty!
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
(CAIRCOMS 535 Oakmead Parkway Sunnyvale, CA 94086