CATHODE RAY TOMES

Lethal Enforcers

Lethal Enforcers (ver UAE, 11/19/92 15:04) (Konami, 1992) · Manual · 13 pages · 29 sections · original scan

Page 1

|ENFORCERS'|

OPERATORS

AND

SERVICE MANUAL

Copyright Konami 1992

PART No. 64200

Page 2

LETHAL

ENVFORCERS

GAME DESCRIPTION

GAME OPTIONS (Dip switches) 4

GAME OPTIONS (Software)

AND TEST MODES 5-8

TROUBLE SHOOTING GUIDE o)

CREDIT BOARD SETTINGS 10 -11

GENERAL INFORMATION 12 )

Page 3

GAME DESCRIPTION

PLAY INSTRUCTION

There are two types of game "arcade" and "street" which are controlled by the dip switches.

STARTING ARCADE TYPE GAME

One or two players can play at the same time a second player can join in at any time by depositing coin/s and pressing start button.

STARTING STREET TYPE GAME

One or two players can play at the same time a second player can join in at any time by depositing coin/s and pressing start button. The stage select screen will appear. To select a stage just point your gun at the required stage and pull the trigger. If you are playing with another player the first selection is accepted.

HOW TO PLAY

Aim and shoot the enemy to kill them. Don't shoot innocent people, if you do shoot them you will lose one life.To reload, point your gun off screen and pull the trigger. You can do this at any time.

Weapons of extra power are available just shoot then to collect. MAGNUM : Large caliber bullets,you can shoot 6 bullets without reload. AUTOMATIC : 12 rounds, you can shoot 12 bullets without reload. ASSAULT RIFLE _ : 3 shot burst,you can shoot 12 bullets without reload. SHOT GUN : Large gauge,you can shoot 6 bullets without reload. MACHINE GUN _ : Full automatic,you can shoot 36 bullets only. GRENADE GUN _ : Explosive,you can shoot 8 bullets only. Being shot by the enemy causes you to lose one life each time, you can get extra lives with high scores.

When set to "arcade" type, there are 5 stages and shooting range as bonus stage. Each stage consists of 3 or 4 scenes where you must defeat the "boss" enemy to continue to the next stage.

When you set the game to "street" type, there you can choose one of the 5 stages or practise on the shooting range.

Continuation is available. (The operator can change the settings in the "GAME OPTIONS")

Page 4

DIP SWITCH SETTINGS

This game is equipped with 4-bit DIP SWITCH on the PCB (position Q1). Switching from arcade type game to Street type game and other changes can easily be done with this DIP switch

FUNCTION ON OFF

SOUND OUTPUT MONAURAL STEREO

COIN MECHANISM] INDEPENDENT COMMON

GAME TYPE STREET

NOT USED

Bold letters show default settings

Note:
  • This machine has be designed to use "stereo" sound .If stereo sound has been turned off you will get poor music and sound effects.
  • Regarding other game options and coin options, refer to "Manual Test" from page 5 to 8.
Page 5

TEST MODES,

SELF TEST

The machine will do a self test on power up if everything is normal "OK" will be displayed and the attract mode will start .If something is abnormal "BAD" will be displayed and self test will repeat.

MANUAL TEST After switching on Power, press the "test switch" on the "pcb" and you will get

  • HOW TO START

the "main menu" of the "manual test".

NOTE: Switching on with "test switch" pressed causes the program in the eeprom to be initialized to default
  • HOW TO RETURN TO GAME MODE Select "game mode" on the "main menu" with the player start buttons then pull any gun trigger to return to the game mode.
  • ITEMS AND HOW TO SELECT Press player one start button to move up the menu, and press player two start button to move down the menu, then pull either player one or player two gun triggers to enter that test. . .

By pulling player one gun trigger you change options one way and by pressing

player two gun trigger you change options the other way.

The "main menu" screen looks as follows.

MAIN MENU

> 1/0 CHECK GU

GAME MODE

Pl START=UP/P2 START=DOWN GUN TRIGGER=DO CHECK

  • EXPLANATION OF TESTS 4a I/O CHECK When start buttons or triggers are pressed "ON" will appear next to its function. Dip switch settings show the present options chosen. To modify settings use the dip switch on the pcb (position Ql). To return to the "main ménu" press player one and player two start buttons at the same time.

4b GUN CHECK The screen is filled with boxes outlined in red you aim and shoot these boxes first with player one gun , then with player two gun:The boxes will disappear when they are shot’.If you cannot shoot some boxes you need to adjust the monitor . You can seé "help" screen by pressing player two start button. It suggests how to troubleshoot problems.

Page 6

4c SCREEN CHECK The screen alignment should be adjusted so you can just see the red outline of the cross-hatch screen. 4d COLOUR CHECK In colour bar screen you can adjust colour brightness so that the specified area should be colourless. Improper adjustment can cause problems in game play. When you press player two start button , the screen will be filled with red, green, blue, white then back to colour bar screen.

4e SOUND CHECK

When "sound scale check" is selected a music scale sounds. . At "sound code" pull player one trigger to increase code value, player two trigger to decrease code value respectively.

4f MASK ROM CHECK

Roms will be checked one after another, and the message "OK" or "BAD" will be displayed on the screen.

4g GAME OPTIONS The following screen will appear. Push player one start button to move the arrow up player two start button to move the arrow down and pull gun trigger to modify settings. Factory settings are shown in green and modified settings shown in red.(Settings below are not always the factory settings). After modification is complete selsect "save and exit" and pull player one or player two trigger to save and return to main menu.

GAME OPTIONS

PLAYER'S LIFE 1 CREDIT 5 LIVES .» Select from | to 9 lives EXTRA LIFE 1ST AT 2000 POINTS .» Select out of "1st/1000,2nd/1000"," Ist/100,2nd/2000" 2ND AT 2000 POINTS +." 1st/2000,2nd/2000"," I st/2000,2nd/3000","NO EXTRA LIFE" CONTINUATION YES (NO LIMIT) .. Select out of YES(NO LIMIT), NO CONTINUE, YES (1-9 times) /ME! .. Select out of 8 levels. wiped SeREEnN ep aon .:"MIRROR","UPSIDE DOWN","NO MIRROR","MIRROR FLIP" VOLUME a 40 «». Sound level from | to 59 .» "ALL THE TIME","COMPLETELY OFF",ONCE EVERY 4

SOUND IN ATTRACT MODE CYCLES"

ALL THE TIME

FACTORY SETTINGS . All settings return to default. SAVE AND EXIT .. Save the modified settings. EXIT

P1 START=UP/P2 START=DOWN GUN TRIGGER=MODIFY SETTINGS

If you select "exit" instead of "save and exit" after you have modifed some settings the méssage appears: "you did not save" - " do you want to save yes or no". When you choose "yes" the screen shows "now saving.." and returns to the main menu. If you choose "no" ,"no modification" is shown and then main menu appears.

Page 7

L TEST MODE — conTInuep

4h COIN OPTIONS

COIN OPTIONS

FREE PLAY NO COIN MECHANISM COMMOM COIN SLOT 1 1 COIN 1 CREDIT COIN SLOT 2 1 COIN 1 CREDIT

PREMIUM START YES 1 2 CREDITS TO START 1 CREDIT TO CONTINUE

FACTORY SETTINGS SAVE AND EXIT EXIT

Pl START=UP/P2 START=DOWN GUN TRIGGER=MODIFY SETTINGS "NO" , "YES .. You can change this with DIP SWITCH on the PCB (SW2)

--"NO" or "YES" to "YES UP TO 4 CREDITS".(You can set the play fee for starting higher than the play fee for continuation)

.. Same as "GAME OPTIONS"

When the “coin mechanism" is set at "common" on the dip switches (SW2 is “off"). All coins are inserted into one coin mech which must be set at 1 coin for 1 credit as a credit board would be fitted, On a cabinet with 2 coin slots "coin mechanism" must be set at. “indepentent" ( SW2 is"on") ,coin settings must be done for each coin slot. The left coin slot will be for player one, the right coin slot for player two. When you want "premium start" setting choose the number of extra coins necessary for starting then decide the coin selling for continuation. The number of coins for starting will be the sum of both y' numbers. | L continuation will be the same.

COIN SETTING OPTIONS ou do not set premium start, the number of coins necessary for start and

COIN(S) CREDIT(S)

Page 8

4i GAME AUDITS

GAME AUDITS

TOTAL PLAYS 200 TIMES -» The total amount of plays. GAMES STARTED 50 TIMES ... The amount of plays started from the beginning. GAMES CONTINUED 150 TIMES .. The amount of continued. .. The average play time per credit. .. The average score per credit. AVERAGE TIME/CREDIT 60 SEC. AVERAGE SCORE/CREDIT 800 PONITS

EXIT CLEAR AUDIT TABLE

P1 START=UP/P2 START=DOWN GUN TRIGGER=EXECUTION

After changing the "game options" or "coin option" it is better to clear the Audit Table to see how those changes affect the game play.

Page 9

TROUBLE SHOOTING OF GUN AND MONITOR

HERE IS A LIST OF COMMONLY FOUND PROBLEMS AND THEIR POSSIBLE SOLUTIONS.

ERRATIC GUN SHOT PLACEMENT.

Check to see that there is no reflected light from fluorescent or neon lights bouncing off the screen. Strong sunlight also affects the shot placement.

YOU CANNOT SHOOT CERTAIN AREA/S ON THE SCREEN.

Check the monitor's purity with red, green, blue and white screen in the "colour check" in manual test. If you find purity problems, you should degauss the monitor. Check to see there is no magnetic equipment around the cabinet. This may also cause the monitor to become magnetized. After degaussing the monitor, you can check the gun and monitor in the "gun check" in the manual test. The polo monitor has automatic degauss, check if this is operational. If problem persists a manual degauss coil may have to be used. Available from your distributor.

SCREEN FLASHES WHEN TRIGGER IS PULLED BUT NO SHOT IS MADE.

Check to see the gun lens inside the barrel is clean. Adjust the monitor brightness with colour bar screen in the "colour check" of the manual test. If this does not cure fault, swop over gun plugs to ascertain whether the gun or PCB is faulty.

Page 10

CREDIT BOARD SETTINGS

This machine is fitted with a mars MS111 coin mech and a mars credit board. Settings are as follows (NOTE THE FOLLOWING SETTINGS ARE FOR THE UK ONLY. FOR OTHER COUNTRIES A CREDIT BOARD INFORMATION SHEET WILL BE PUT LOOSE IN THIS MANUAL).

O © | GAME PRICE INCREMENT 54321 & METER PULSING

10p

COIN ENABLE 5} 4/]3/2/ 1 On = Accept coin FEDCB ! 123456789! o0}0;0;0| 0 Off = Reject coin l 3

Coin | F|E|Dc| BGIN. pLPRICE BONUS |

Value | £1] 50p |20p hop|

123456789 GAME PRICE SETTING NOTE ; Power unit down before changing switch settings

GAME PRICE| SWITCH (2 QN, | BONUS GAME AWARDED AT:

1[2]3]4LEVEL 1LEVEL 2
10p0/0]0)]0-
20p1|0]01/0
30po;iyo|o|SOP£1
40p1TTO]0 |

SOp o;o;i)]o0

60pT|;o{1/0

70p o{;ij{ifo

80prytyiyo!£1£2

90p o/;o;oT!

£1.00r/o;o;ytT

£1.10 o);if;oryt £1.20 1/i1yoyti

£1.30o0;o0;1]t£2£5

£1.40 1|/o;]ityi

£1.500TTT
£1.601{/.1yiryti

THE PRICE OF GAMES IS CONTROLLED BY SWITCHES 1 TO4.

Page 11

BONUS GAMES SETTINGS

BONUS LEVEL 1

No. OF 1= ON SWITCH

BONUS. acl NOTE : VALUE AT WHICH

AWARED56BONUS GAMES ARE AWARED

DEPENDS ON GAME PRICE

000SET.
110
201
311

BONUS LEVEL 2

No. OF 1= ON BONUS SWITCH 0= OFF GAMES

AWARED79
0- 000
1100
2010
3110
4001
5101
6011
7111

OUTLINE SPECIFICATION FOR MARS ELECTRONICS INTERNATIONAL

CREDIT BOARD _ Machine interf The board is fitted with a 0.2" Pitch Molex Compatible

1Ov- Supply inputSupply Voltage
212v- Supply inputMAX 15v
3Ov- OutputMIN 10v
4Game o/p- OutputMAX CURRENT CONSUMPTION 200mA
512v- Output(excluding validator,game o/p ,lamp,meter)
6Meter o/p - OutputGAME OUTPUT0

transistor switching to

712v~ OutputSink current {00mAmax voltage of 0.5V
8Lamp o/p_- Output100ms pulse with 200ms min gay

(timing +- 20% over 0 - 40C Enperature range).

Page 12

SPECIAL FEATURES AND PARTS LIST

The machines SPECIAL FEATURE is that it can be converted to a standard Jamma cabinet when the game has reached the end of its useful life. This is done by ordering CONVERSION KIT PART No. 33059 from YOUR DISTRIBUTOR. The CONVERSION KIT contains a two player control panel, monitor brackets, new screen glass plus convertion instuctions.

The machine is wired for stereo or mono, the LETHAL ENFORCER has an adaptor lead for stereo , Which plugs on to the pcb (4 way jst) and plugs into the main loom ( 4 way M+L).

PART NO.

10083

10087

21236

21237

31333

38924

14012

16161

50157

50381

241556

241558

241557

23547

33059

PARTS LIST

DESCRIPTION

MONITOR 25" POLO

25" POLO CHASSIS

GUN + LEAD (RED)

GUN + LEAD (BLUE)

GUN ROPE

PSU POLO MONITOR

SWITCH MODE MIGHTY POWER

MAINS CABLE (IEC IN)

ME 111 MECH FRONT REJECT (GGBLSLO0B/E2 UK ONLY)

CREDIT BOARD MARS (109645001)

SCREEN GLASS LETHAL ENFORCER

MIRROR LETHAL ENFORCER

A-PANEL LETHAL ENFORCER

CONTROL PANEL OVERLAY

JAMMA CONVERSION KIT (U/R MONITOR BRKT + 2P PANEL)

Page 13

GUN 1 PLUG 2] }GUN | PLUG 1 GUN 2 PLUG 2| |CUN 2 PLUG | MARS COIN VALIDATER

WHITE PLUG RED PLUG VHITE PLUS RED PLUG AND CREDIT BOARD ASSY

aos =35 SERVICE SW 13: an , I SPEAKERS

GR-W STRK

STEREO SP LEFT

STEREO SP RIGHT

= [BK GND = |p cu =|

WAIN P.C.B 2B eoreeee 2255555 3fef4 |p 15 fe 16 |F PLE

-V +1eV +12 HONO/STEREO

7 HK] mae SELECTION CONNECTORS

[

6\J 19

METER

ki SP LEFT SP LEFT “=| SP RIGHT = SP RIGHT ‘=| VIDEO R [SS VIDEO 6 |= VIDEO BL es VIDEO SYNC ™ VIDEO GND SERVICE SWi diel

L TH

STD JAMMA CONNECTOR COIN COIN 2 IP START 2P START 1P UP ep uP IP DOWN 2P DOWN 1P LEFT. eP LEFT IP RIGHT eP RIGHT IP FIRE P FIRE | IP FIRE 2 2P FIRE 2 4P START SP START W5]S N61 7 HANTAREX 25" POLO MONITOR

Uda vi9iN [oP START 1P LEFT

DO Ten [22h 2 [eae |S) IP START P RIGHT IP FIRE | 4P START IP FIRE 2 SP START GND IP UP IP DOWN

b [ee [ea ee Pe = 5S CONTROL PANEL

If 2 t]rof9 je'7 16°54 3 24 eP LEFT eP FIRE 2 2P DOWN P FIRE oP RIGHT ep UP CONTROL PANEL| PLUG 2

TITLE PANEL FLUORESCENT LAMP

renter TO ALL EXPOSED METAL PARTS Flo”

iPr DPWE HON HAINS OV

rs PE APPREWED PCF TUBE

ARE PREDUETLON POLO PSU ASSY