Space Invaders Service Instructions and Parts Catalog (SV070019)
Space Invaders / Space Invaders M (Taito / Midway, 1978) · Parts Catalog · 30 pages · 26 sections · original scan
UVBABAARAARBAERARERTEBAEBEAEBELERERBEREAEBEBERLEUBEREEBEREREEEERESE BERREEEE TE: WRVRAREBRRRARARREERABEBRERERRERERREETEREEEERY
\ Faceo
TAITO CORPORATION
SERVICE INSTRUCTIONS AND PARTS CATALOG
Z : x %
BRLVAAERERARABRAREEABUABERHBEBEREEREREREEEE EES wu svo70019 PARE EESEEEEEECESEESESEESESEESES EEE ES ESEES ESSERE DES SEES S ESSE SEES YS GD
i 7 oe STL TER
- Name of Part (See Fige, 1 and 2}
Front Glass Fire Button
Control Lever 1-Player Start
Start Coin Slot
Cash 40x Door
Casters
Fig. 2
Back Door
Power Switch
Main Fuse
Ground Terminal
Power Plug & Cord
- Transportation and Installation
- Avoid rough handling in transportation; the picture tube is fragile.
- Taito "SPACE INVADERS" is for indaor use.
- Install the machine indoers only.
- Do not install the machine outdoors.
o6 a oo,’%
- Install the machine on flat-surfaced floor and provide suitable space in front of the machine.
- In case of installation in location with vibration, fix the machine by the use of anchor bolts and wire ropes as shown below.
- Do not install the machine in dangerous places viewed from the angle of disaster prevention,
(Emergency Exit) Fire Ala
- po not install the machine in location with exposure to direct sunlight or excessive heat in order to prevent the unit from rising internal temperature. Also, do not install the machine in location with being damp
or dusty.
° Install the machine in location so that no children
can enter the place between the backside of the machine and the wall of the location.
- Ensure all connections to the PCB's are secure.
Never fail to connect the ground terminal.
Insert the power plug into a proper outlet and turn the power switch on.
- Handling Note and Warning
Erroneous or partial picture may appear on the screen when the machine is first switched on. This is typical of the characteristics of the CPU, and will correct itself automatically when the power switch is turned off and on.
- Taito "SPACE INVADERS" uses a CPU and the latest solidstata circuitry for long life, however, as with sophisticated electronic equipment certain precautions must be observed to avoid damage.
- Do not attempt to service with ordinary testing equipment, since the internal voltage of the testing equipment may cause damage to the circuitry...
- Never connect or disconnect any of the solid-state modules while the power is on.
- Routine Maintenance
- Owing to the solid-state electronic circuitry, this machine should require very little maintenance and only occasional adjustments, however, it is necessary to take measures to insure its daily safety.
5S. Playing Instructions
oO
oO One or Players.
Insert coin(s).
1 coin - 1 player (3 laser bases... A
2 coins - 2 plays‘(or 2 player game)
Select one or two player game,
As the "attacking sound" is heard, invad the screen. Also, a laser base and four appear on the lower stde of the screen.
To move the laser base left or rigth by
lever.
To fire laser, push the fire button.
In two player mode, the play alternates
Scoring:
tec ence eeene 2 27
see ee eee eeee 20 pts.
stew ence eeee 10 pts. ae
ren
ee
Functional Description of Game :
© Invader advance ‘step by step against the they move left and right.
Fortresses are gradually destroyed by th
invaders. They are also destroyed by la
As the number of invaders jecreases, the
UFO'hit gives the player mystery score (
300 points).
When score reaches 1,500 pointsijadjustab base appears with "beep" sounds. djustable)
ers appear on fortresses
using the Control
between the two.
laser base sa
e attack of
ser,
y move fast.
50, 100, 150, or
le), a bonus laser
Game ends when all laser bases are hit by invader missles or when invaders overrun the base.
Up to 99 coin can be credited.
6.. Adjuatments on Power Supply F.C. Board & (Bee Fig. 3) “4
IC's. ,
%
- fo check the output voltages, measure them on the G- * connector or the Q-connector, {See the cable block diagram, AARO0160 in thie manual.)
i é
+
at Pig. 3 : \
- -12V VR... Pot for adjusting -12v line voltage .
(Adjustable range: -12V - -15V DC)
- + SV VR... Pot for adjusting SV line voltage (Adjustable range: 5V - 6V DC)
- +12V VR... Pot for adjusting 12V line voltage {Adjustable range: 12v - 15V DC)
- gw3 and SW5... Switches fox adjusting the awmber.of laser bases.
{Optional settings)
Table 1
The number of laser bases is presat at
"3" at the factory.
- sw6... Switch for adjusting bonus points.
(Optional Settings) scone | sw6 laser asd ON
Table 2
The bonus points are preset at "1500" at the factory. :
°® SW7... Switch for adjusting play pricing displayed on the screen.
When this switch is set in "ON" position, the play pricing is displayed on the screen as follows:
1 COIN - ] PLAYER, 2 COINS - 2 PLAYERS
(°OFF* position : Nothing is displayed.)
- SW1l, SW2, These switches are for the factory adjustments, and should be set in "ON" position.
i
- Adjustments on Game & Sound PC Board (See Fig. 4 and Tables 1 and 2)
To increase the sound, tusn each pot(VR1 - VR8) as show
” §—-vercf] Gwe fw §-- vas] || | fac] i fw below.
i
° VR1...
e © VR2...
° VR3...
° vR4...
° VRS...
° VRE...
- VR7... Rot
Pot
Pot
Pot
Pot
Pot
Pot
Pot for
for
for
for
for
for
for
for adjusting
adjusting
adjusting
adjusting
adjusting
adjusting Sdjusting
adjusting Fig.
volume
volune
volume
volume
volume
vo lume
volume of
of
of
of
of
of
of UFO.
laser base when firing.”
laser base when destroyed.
invaders when destroyed.
"beep" when bonus is awarded.
invaders when advancing.
UFO when destroyed.
total sound volume.
8. Adjustments oa TV Monitor (See Fig, 3) oe ‘
«ie V. HOLD
W. HOLD { : >
Vv. HOLD
BRIGHT —_ CONT. Fig. 5
The TV monitor is properly adjusted before shipping, however, if necassary, readjust as follows:
- Horizontal Hold Adjust the H. HOLD control if the picture is warped or broken into diagonal lines.
- vertical Hold ° Adjust the V. HOLD control if the picture rolle vertically
across the screen,
© Gcreen Contrast and Brightness Adjust the CONT. and the BRIGHT controls to keep the ! screen clear.
° FOCUS... Screen Focus Control
9, Adjustments of Supply Voltage (See Fig. 6) *
If the voltage of the power supply ia low, the picture on
the screen sometimes flickers. In that case, change the terminal of the power transformer in the cabinat. This adjustment is obtained by the use of the change-over — switch.
240 VO-——--—_ |) sp ———O1lE 230 Vv | 0 220 Vv 16
210 vO—— 0 120 vO—-—— O17 110 vO-————_ i | 7 100 Vv
I ee Le . O° qv 9
Pig. 6 e<<<ec< cee eg
10, Typical Picture During Play
(See Fig. 7)
High Score of the day Score of Player 1
-—_-oooeeeee Invaders SCORE!) =I SCORS SCORE goo0 0000 0000
aah aang -—ml ) ye tL. Laser Base eae
Number of Laser Base
Control Lever
Fire Button
Fig. 7 CREDIT 00 Score of Players
Instructions
Piant
For tress
2-Player Start
1-Player Start
CABINET ACCESSORY ASS’Y
Seepage 20
CABINET ASS’Y See pages 20,21,22
CONTROL PLAT ASS’
ame
VIDEO AND FLUORESCENT
See pages 23,24 LAMP ASo'Y
PLAVFIELD ASS'Y —~—
PRINTED BOARD AND
REGULATOR AsS'Y 1 ee pages 26,2
a |
See pages 27 ,28 iano Fa EET Te mes che FRONT DOOR AND COIN .. MECHANISM ASS'Y SRE og. els ape
CABINET ACCESSORY ASS’ ¥
[tem Part % Description
I AAOL4511 Molding
2 $VO10001 Cabinet
3 SLO30011 Corner Protector
4 AAO16513 Caster
5 $V030004 Corner Protector
6 AAQ1 3519 Corner Bracket
7 AAO19524 Edge
CABINET ASS Y
Item Part Description
I AAOL6545 Lock & Key
2 AAO26512 Cash Box Door
3 AAQ1 3583 Lock Plate
4 AAO28506 Cash Case
5 AAO25510 Coin Chute
6 AAOI 3609 Plate
7 AAO13580 Cash Box Guide (B)
8 AAO18504 Grommet NG-79-C
AAOQO28507
AAOL3579
AAO51717
AAU13581
AAQO1 3562
AAOI95 26
AAT71011
AAOI 3584
AAOI3512
AAOI9542
AAO52501
AAO1I3594
AAO5 5784
AAO5S6508
AAO1 3523
AAO6 2501
EPOs0010
AAOI 3510
AAOI 3569
AAOI16549
AAM50007
AAO55720 Cash Box
Cash Box Guide (A)
Counter ME~-5
Counter Bracket
Ventilator
Net
Speaker 842 20W 16cm
Support Bracket
Handle Cover .
Switeh Cover
Toggle Switeh S-301
Switeh Box
Fuse Holder S-N 2056
Earth Tarminal T 375
Door Stopper
A C Cable & Plug Ass'‘y
Ventilator
Lock Plate
Lock Gard (#)
Service Lock M7800
Counter Drive PC. Board Ass'‘y
Connector 10P
Item AAO13584
AAOQI 3587 Connector Bracket
Support Bracket
CONTROL PLATE ASS’ Y¥
Part 4%
BPO90003
BWO20001
AAO19533
BPO50001
AAO19534
RMO 30003
AAQ16554
WNO30005
WNO 30006
SV0O70015
SVO10005
SV030007
WNO30004
SV030008
SV0O20001 Description
Color Ball
Control Shaft
Push Button
Spring A
Push Button Housing
Hook
Super Cramp C~137
Lock Plate ,
Slide Plate
Control Panel
Control Board
Switch Base
Cam
Stopper Bracket
Shaft
SVO030009
WTO50001
WT030007
AAOS5 2532
AAOI9564
RMO30004
AAO52531
AAO19504
BPO30002
AAOS5S5789
AAOS55501
AAOS 5502
AAOQS5790
AAOS5521
AAQ5S5522 Spring Bracket
Plate Spring
Washer
Micro Switch
Insulator
Stop Plate Type-V Bots peak ari te ects
Micro Switch VL-tiL
Insulator Type-V
Push Switch Bracket
Mate-N-Lok
Ma te-~N-—Lok
Mate-N-Lok
Mate~N-Lok
Mate—-N-Lok
Mate—-N-Lok Plug Pi
Cap 2P
Pi ne 2P
Socket
Cap 3P
Plug 3P n
Pin
VIDEO AND FLUORESENT LAMP ASS’ Y
Part M%
AAOS5 4720
AAO55695
AAQS54711 Description
Glow Lamp FG-1P
Glow Socket
Fluorescent Lamp 1 5W
4 AAOS5S5694 FL Socket
- FFO10005 FL Board
6 AAO55713 AC Plug WH4012
7 AAOS5715 AC Socket WK1012
8 AAO12510 Spacer
. 9 AAOS7504 Ballast 15W
10 SV0O70007 TV Mask
11 SV030005 Video Bracket (A)
12 SVO30006 Video Bracket (B)
13 SV090008 Video
14 BWO30004 Video Angle
15 SLO30013 Video Bracket (C)
16 SLO30014 Video Bracket (D)
17 SVO90010 Color»Sheet (A)
18 SVO99D011 Color Sheet (B)°
19 SVO90012 Color Sheet (C)
PLAYFLELD ASS’ Y
Item Part 4% Description
1 FFO30010 Glass Retainer ToP
Fr a eee ee
SV0790002
BPO30023
AAOI 8552
MSO90010
BWO30005
MSO30007
MSO30005
FFO30011
SV030003
Aagsenz0
AAO55695
AAO57504
AAO! 2510
AAO55694
AAOS4715
SVO10004
SVO70006
SVO30001
SV010002
SV030002
$VO70005 Titte Panel
Lock Plate (B)
Rubber
Half Mirror
Mirror Bottom Plate
Bracket
Glass Retainer Bracket
Glass Retainer Bottom
Glass Ketainer ,
Glow Lamp FG—1P
Glow Socket
Ballast 15W
Spacer
FL Socket
Black Light FL 15BL
FL Board
Playfield
Bracket (A)
Field Case
Bracket (B)
Decoration Board AeA Einar Saronic aati aici
ae
PRINTED BOARD AND REGULATOR Ags’ Y
Item Part % Description
1 BPO90007 P.C. Board Guide (C)
2 SVNooo02 S&S V. -C. P. U. -P. C. Board Asa'y
3 AAO55949 AMPLEAF Connector 18P
4 SWO9 0022 P.C. Board Guide. (B)
5 SVNOOOO0i1 S. V. ~Game P. C. Board Ass'y
6 AAOS5948 AMPLEAF Connector I5P
7 BPO90006 P. C. Board Guide (B)
8 SwOo90021 P.C. Board Guide (A)
9 AAQI19527 P. C. Board Guide (A)
10 AAM60005 Power Supply P.C. Board Assa'y
i1 AAQi9528 P.C. Board Guide (B)
12 AAT41166 Capacitor 1t6LASN-2200
13 AAO57562 Transformer
14 AAT1I4025 Rectifier 12C20 (A)
15 AAO( 3599 Socket Box
16 AAO55788 AC Socket S-1520
17 AAOS2535 Toggle Switch S 2A
18 AAOQ55805 Fuse Holder F3321 4P°
19 AAOS55789 Mate-N- Lok Plug Pin
ee. +
Item
wo AAO5S5561
AAOS 5562
AAOS5790
AAOQ55585
AAO555 86
FRONT
Part Ke
AAO2Z1530
AAOL 6549
haga Wea
AAO29508
AAQ26510
AAOQS5S4704
AAOS5 5698
AAO26511
AAO1I9522
AAOQ1 3578
AAO25508
AAO25.507 Mate-N-Lok Cap 6P
" Mate-N-Lok Plug 6P
Mate -N-Lok Socket Pin
Mate-N-Lok Cap 9P
Mate-N-Lok Plug 9P
DOOR AND COLIN MECHANISM ASS’ Y
Description
Coin Shield Plate
Service Lock M7800
Coin Entry Plate for ¥100
Price Card for ¥100 Coin
Door Fram a)
Pilot Lamp 12V 150mA
Vinyl Socket BA-9
Rejector Door
Cover Plate
Lock Plate
Coin Guide (B)
Coin Guide (A)
ii raat AAO6 8717
AAOI17705
AAOI 3577
AAO5 2511
AAO27504
AAO15504
AAOI 3557
AAOI3554
AAO23501
AAQ25503
AAOI1 9502
AAO52512
AAOS3501
AAOZ 2503
AAO55789
AAQ55581
AAOI 3527
AAQ55582
AAOQS55790 Tilt Switch
TAITO Name, Plate
Lock Gard
Push Button Switch VAQ—-4R
Cancel Rod
Spring
Lock Gard
Rejector Bracket
Rejector Holder
MS Coin Guide
Insulator Type 3
Micro Switeh C-5G3~-3
Actuator CAA~}
Rejector for ¥i100 FR-112F
Mate -N-Lok Plug Pin
Mate-N-Lok Cap 9P
Socket Bracket
Mate~-N- Lok Plug 9P
Mate—N-Lok Socket Pin ANS OG tk cot atthe CAE Ae Gat ek ae
SHIOVANT 19VdS (ESIVI)