CATHODE RAY TOMES

Virtua Tennis 2

Virtua Tennis 2 (Sega Enterprises, Inc., 2001) · Manual · 33 pages · 23 sections · original scan

Page 1

1ST PRINTING OCT 01

  • SEGA PROFESSIONAL TENNIS —

Universal Kit

Kit Installation Instructions &

Service Manual for ROM & GD ROM SYSTEMS

Switchable FROM High Resolution 31K

TO Standard (Low) Resolution 15.75K.

( 1-2 PLAYER GAME )

SEGA ENTERPRISES, INC. USA

MANUALNO. 999-1311

Page 2

VISIT OUR WEBSITE!

| © SegaService.com — (158

Service Department phone 415.701.0580 fax 415.701.0504 J2pIOH abog |. Yoogdons \\ upimas \ Aso sowroany |B ~ SEGA \ SERVICE Ask Dave! : r . Ottice . clas Manuals Seerenh what's New

people have visited this page since 3/16/01

Ifyou have any questions or comments about this site please E-Mail to Darl Dandson@seu sega com

You will need the IE items to view this = in its entirety

AllPlatforms Windows Macintosh

D viecret core

Page 3

Virtua Tennis 2 Sega Naomi System Kit Contains List

Part # Desc Qty

400-5397-01 NAOMI POWER SUPPLY 1

838-13616 AUDIO POWER AMP 2 CH 1

560-5407-UL AUDIO XFORMER 120V 1

838-13683-93CV1 JAMMA I/O BD (NAOMI) 1

600-7141-200 USB CABLE 1

600-7009-2500 VGA VIDEO CABLE 1

840-0080D-01 ASSY CASE PCI DIMM BD 1

600-7247-500 CABLE SCSI TYPE 2 500MM 1

999-1348 SERVICE SWT BRKT ASSY 1

999-1326 JOYSTICK, COMP. BLUE 2

999-1325 BUTTON, COMP. GREEN 2

999-1329 SWITCH, PB LARGE 2

999-1327 BUTTON, COMP. BLUE 2

999-1341 CNTRL PNL (METAL PLT) 1

Page 4

Virtua Tennis 2 Sega Naomi System Kit Contains List

Part # Desc Qty

999-1343 CNTRL PANEL (NAOMI) 1

999-1344 CNTRL PANEL (STANDARD) 1

999-1347 DECAL SIDE ART 2

999-1345 INSTRUCTION SHT (PLAYER) 1

999-1346 INSTRUCTION SHT (BUTTON) 1

999-1342 MARQUEE ART 1

999-1349 DECALS (BTTNS -TOP SPIN)BL 2

999-1350 DECALS (BTTNS-SLICE SPN)GR 2

999-1351 DECALS (BTTNS-LOB SHT)WHT 2

Page 5

DESIGNED RELATED PARTS

Marquee Art ---- 999-1342

Instruction Sheet (Player) ---- 999-1345

Page 6

Decals Side Art ---- 999- 1347

Control Panel Overlay

Decals-Buttons -Top Spin (Blue) 999-1349 ~_ Decals-Buttons - Slice Spin (Green) 999-1350—| Decals-Buttons - Lob Shot (White) 999-1351] SA OA PHOT ERSIONAL TENNIS

NOT PICTURED

Page 7

V4 Feb 9.2000 (iat ( eG \ SERVICE BULLETIN SEGA Service Department http://www.seuservice.com ran i, 45133 Industrial Drive Phone: 415.701.6580 ESE yy = Fremont, Ca. 94538 Fax: 415.701.6594

SPECIAL NOTICE FOR ALL SEGA NAOMI KITS

PROBLEM:

The SEGA Naomi Game kits are actually ‘JAMMA Dependent’. What this means exactly is they will only install into existing JAMMA Cabinets. If an operator tries to install these kits into a Non-JAMMA cabinet, they will first have to bring the wiring up to JAMMA Standards.

SOLUTION:

Step 1 Disconnect the games original DC Power Supply. You may only use the power supply provided with your kit. Be sure to set the voltages going to your Game BD to 5.1 and 3.3 volts DC to assure proper operation ( Measure on Square Connector at Game BD. Yellow = 5vdc / Brown = 3.3vde / White = Gnd ) ° Step 2 You MUST USE THE COIN METER SUPPLIED WITH YOUR KIT to assure proper Coin acceptance. A minimum 18 Gauge wire should be used from the Coin Meter | output line on your JAMMA Harness. The Svde ( Yellow ) wire found in the wiring bag of your kit MUST BE USED for the supply voltage to the meter.

Not following the directions provided herein may cause your game to malfunction. All electrical work should be performed by the site’s Serviceman or Technician.

IMPORTANT!

@ In order to prevent an electric shock and short circuit, be sure to turn power off before performing work or touching the interior parts of the product. @ Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circuit

WARNING! accident. @ Do not touch places other than those specified. Touching places not specified can cause an electric shock or short circuit accident.

If you have any questions please contact the SEGA Service Department at the numbers given above. XY y,

Page 8

INSTALLATION INSTRUCTIONS

  • First. Remove all access panels from the game. Locate the original game Logic PCB’s & Power Supply and remove from the Cabinet by first disconnecting all harnesses from the boards. (You need only to splice in the Main Power (110v AC) into the 3-Pin Connector (GRN/WHT/BLK).)
  • Remove all existing game harnesses (we suggest using New Jamma Harnesses (NOT contained in the kit) to ensure reliability).
  • Locate the most convenient and open area of the cabinet to mount the Virtua Tennis 2 Naomi System Assembly. Make sure this area is free and clear of all cable harnesses and grounds, cable clamps, etc.

Vacuum out or clean bottom of cabinet of dirt & miscellaneous parts (e.g. 4 \dea! screws, loose coins / tokens, etc.). Goo

Remove all exterior decals and repair any cabinet damage. Repaint cabinet if necessary. Remove the Monitor Plexi or if your game plexi has Silk-screened artwork, you will need to strip it off. Good idea!

  • Connect the JAMMA Harnesses to the JVS-JAMMA Interface Boards. Separate the wires from each other (i.e. Control Panel, Video, Speaker, Power Supply). Run the various harnesses to the part of the cabinet they go to ensuring they are dressed properly & secured to the cabinet. Locate the Volume/ Speaker/Coin Meter Cable and connect to your existing Switch Bracket or use the new one included with the kit. Note: /fyou are using a VGA Compatible Monitor you can run your VGA Cable directly to the monitor or connect it to your JVS JAMMA Interface for RGB Conversion to your JAMMA Cables.
  • Remove Marquee from cabinet and cut to fit the new Virtua Tennis 2 Marquee in place. i} C REPLACE old Joysticks & Buttons with the NEW ones supplied in Kit.) good \dezy
  • First remove all Joystick and Button assemblies from the Control Panel. Remove Lexan and Control Panel Overlay. Proceed to clean surface of the Control Panel by removing all adhesive and dirt. Fill in or plug up existing button holes to set up a blank work area for your new controls.
  • Install the new Control Panel Overlay by carefully peeling off the paper backing and laying down on the panel. Smooth it out, starting in the center and working your way to the edges (removing all of the trapped air pockets). If necessary, cut the edges of the overlay excess and fold under panel.
  • Cut out the button and Joystick Holes. Install Joystick and buttons from kit into the Control Panel and tighten down. Connect all game harness wires to switches and buttons.
Page 9

INSTALLATION INSTRUCTIONS

  • Proceed to place new decals on the sides of the cabinet. Locate a new monitor bezel, if needed, and replace glass, if required (due scratches). Install Instruction Placard to the back of the Monitor Glass.
NOTE: As a precaution, disconnect the JAMMA Harness from the I/O Boards and turn power on. With a Multi-Meter, measure the Sv and 3.3v. Adjust if necessary to 5.15v DCand 3.3vDC. Measure the +12 to ensure the wires and voltages are in the correct position. Turn power off. Plug in the JAMMA Harness once again to the I/O Boards. The Attract Mode should appear on the screen.

Adjust the SIZE, CONTRAST, BRIGHTNESS, and COLORS on the ( Monitor for optimum appearance. Adjust VERTICAL/HORIZONTAL good \deay Hold to get a stable picture, if required.

Enter DIAGNOSTICS and adjust the Volume Level, test all Buttons & idea! Joystick for proper operation & wiring. Adjust Pricing. Coin-Up and test out a game to ensure proper play functions are as they should be.

Good

Page 10

Sega Naomi System Switch

Bracket and Speaker

Installation Diagrams

(Figure 3)

To CN1 of Amplifier Board Pin 1 JAMMA Pin 8

Pin 4 ——_ Yellow Wire from Extra Harness (+5v) Pins

= + al . fal a i Coin Meter S| 2] 4 a #8] S ; = Test Service

t-——e JAMMA Pin R Volume [—* JAMMA Pin 1 JAMMA Pin 15

GRY/RED = From CN2 of Left Amplifier Board ORG/RED Speaker

GRY/BLUE = From CN4 of Right Amplifier Board ORG/BLUE Speaker

Page 11

Sega Naomi System JAMMA Harness Wiring

(JAMMA I/O BD) (Figure 4)

Ground 1|A Ground

Ground 2/8 Ground

+5v (Not Used) 3 | Cc +5v (Not Used) +5v (Not Used) 4/D +5v (Not Used)

(Not Used) 5] E (Not Used)

+12v (Not Used) 6] F +12v (Not Used)

Key 7] 4H Key

Coin Meter 1 8] J Coin Meter 2

(Not Used). 9)/K (Not Used)

(Not Used). 10} L (Not Used)

(Not Used): 11} M (Not Used) Video Red 12 | N Video Green Video Blue 13] P Video Sync

Video Ground 14) R Service

Test: 15/S (Not Used) Coin 1 16] T Coin 2

1P Start 17| U 2P Start

1P UP 18) Vv 2P UP

1P Down 19 | W 2P Down 41P Left: 20) X 2P Left

1P Right 21) Y 2P Right

Attack 1P (1P SW1) 22|Z Attack 2P (2P SW1)

Grapple 1P (1P SW2) 23) a Grapple 2P (2P SW2)

Support 1P (1P SW3): 24| b Support 2P (2P SW3)

(Not Used): 25] ¢ (Not Used)

(Not Used). 26] d (Not Used) Ground 27 |e Ground Ground 28 | f Ground

Page 12

Sega Naomi System Filter Board Information Connector Description etc

Connector Description etc.

Psw2 PSW1 ——DIPSW1 [eo] (©) [aaa

CN2 [cn7] é a Service Test Bp]o|o Iplo}o}o Switch e © @| Poo Switch io) ofa p)o]olo / :

Preamp Level VGA Level Power Connectors Audio Out Video Out

ae — “To ~ a < “ ~ ‘ N

N N a N 7 N 7 XN / 1 2 3 4 \ / \ , \ ‘ Setting for High \ / Resolution 31KHZ \ / 1-4 off \ ! \ H i} \ i \ 1 2 3 i Ul \ Setting for Standard / \ Resolution 15KHZ i \ 1 on 2-4 off. / \ / . / \ / N ¢ Ne a

Page 13
  • HANDLING PRECAUTIONS

A

WARNING!
IMPORTANT @ To prevent electric shock or IC Board malfunctioning, be sure to turn off the power for the cabinet when installing or removing the IC Board. @ Extraneous matter such as dust on the IC Board can cause the IC Board to generate heat and result in a fire due to short circuit, etc. Ensure the IC Board surfaces are always kept clean. @ Use NAOMI for the cabinets compatible with JVS. Using NAOMI for the cabinet other than those compatible with JVS can cause generation of heat and a fire.

Be sure to connect the IC Board and connectors completely. Insufficient insertion can damage IC Board, etc. For the IC Board circuit inspection, only the use of Logic Tester is permitted. The use of ordinary testers is not permitted as these can damage the IC Board.

Do not subject the IC Board to static electricity when installing the IC Board in the cabinet or when connecting wire harness connectors to the IC Board.

When soldering buttons, etc. to the wire harnesses, be sure to remove the wire harnesses from the IC Board so as not to subject the IC Board to heat.

Using NAOMI without the Shield Case can cause electric wave trouble. Be sure to use NAOMI together with the accessory Shield Case. The monitor frequency corresponding to NAOMI is 15kHz or 31kHz. NAOMI can not be used for the cabinet incorporating a monitor or projector not corresponding to 15kHz or 31kHz.

@ Concerning the display of JAMMA VIDEO STANDARD: JAMMA VIDEO STANDARD adopted by NAOMI is referred to as JVS. As against this Standard, the conventional JAMMA STANDARD which employs 56P Edge Connectors adopted by ST-V, etc. is displayed as Old JAMMA STANDARD. The specific Manual attached to each game sometimes displays JVS as JV STANDARD, New JAMMA STANDARD, or JAMMA 2 STANDARD AGAINST OLD JAMMA STANDARD as JAMMA STANDARD, JS, etc.

@ The contents herein described are subject to change without notice.

Page 14
  • SPECIFICATIONS

© ON-SCREEN DISPLAY

Monitor Position

HORIZONTAL Horizontal Synchronous Frequency

@) CONTROL PANEL

8WAYS 8WAYS. Rta a nta _@ <—e- 0 Le —@0 v Jy swi OO 4 Jy Swi START SW

PLAYER 1 PLAYER 2

LOB SHOT BUTTON (Press both buttons at once) a LEVER TOP SPIN SLICE SPIN BUTTON BUTTON (SW1) (SW2)

@ LEVER: Character movement or shot direction

@ TOP SPIN BUTTON: Top spin shot (ground stroke or volley automatically chosen by CPU) @ SLICE SPIN BUTTON: _ Slice spin shot (ground stroke or volley automatically chosen by CPU) @ LOB SHOT BUTTON: Lob shot (Hits a ball highly.)

(Note 1)

(Note 2)

(Note 3) Top spin is the shot that applied order rotation (vertical rotation) to the ball. A ball flies quickly and bounds highly; an orbit is high. Slice spin is the shot that applied reverse rotation to the ball. A ball flies late as it floated and bounds low; an orbit is low. Lob is the shot of a high arch that passes over a partner's head. It's effective when passing the head top of the partner approaching the net.

Page 15

Lob shot Top spin

Slice spin

® Minimum DIMM Memory Capacity

256 MB

Page 16

GAME SUMMARY

A versus type tennis game featuring the 16 actual professional tennis players. The type of game played is men's/women's singles and also men's/women's/mixed doubles. Max two players can play this game in versus competition singles (SINGLES: VERSUS), or collaborated doubles (DOUBLES: TEAM PLAY).

HOW TO PLAY

® Insert a coin(s), and the credit display on the monitor counts up. When the one credit equivalent coins are inserted, the display changes to "PRESS START BUTTON" from "INSERT COIN (S)".

@) Press the START Button while "PRESS START BUTTON" is displayed, and the character selection screen appears. Bring the arrow to the desired character and press Top Spin Button (SW1) or Slice Spin Button (SW2) to decide the character being selected.

® To win the game, you have got to take first the number of games that have been set in the GAME ASSIGNMENT (default setting is 2 games). If you win, you can proceed to the next stage. There are a total of 5 stages in this game, and wining the game results in proceeding to the ending screen and game over.

@ When you wish to intrude into a versus game, insert coin(s) and press the START Button anytime in the game play. If the DOUBLES setting is ON, the select screen of versus competition singles (SINGLES: VERSUS) or collaborated doubles (DOUBLES: TEAM PLAY) appears.

GAME SCREEN

Player's Name

IP Rafter COM Henman

GAME[_[_] Caw | / \ Number of games taken

Se Serve speed core S| IP 30 Pp

COM 40 200km/h

Page 17

CHARACTERS AND STAGES

Male pro tennis players: Patrick Rafter (Australia) Tim Henman (Germany) Cedric Pioline (France) Yevgeny Kafelnikov (Russia) Tommy Haas (Germany) Thomas Engqvist (Sweden) Magnus Norman (Sweden) Carlos Moya (Spain)

Female pro tennis players: @ Venus Williams (U.S.A.) @ Serena Williams (U.S.A.) @ Lindsay Davenport (U.S.A.) @ Monica Seles (U.S.A.) Mary Pierce (France) Arantxa Sanchez-Vicario (Spain) Jelena Dokic (Yugoslavia) Alexandra Stevenson (U.S.A.)

VENUES

SINGLES: A total of 5 stages (CPU randomly selects stage from | to 4, and the final stage is fixed.) DOUBLES: _ A total of 3 stages (CPU randomly selects stage from | to 2, and the final stage is fixed.) VERSUS COMPETITION (VS): CPU randomly selects stages.

Hf Australia Stage (Hard court) HB France Stage (Clay court) HBU.S.A. Stage (Hard court) HB England Stage (Grass court) Hi Tokyo Stage (Carpet court/Final stage)

Page 18
  • TEST MODE

A. SYSTEM MENU

When settings are changed in SYSTEM ASSIGNMENTS, COIN ASSIGNMENTS, and GAME ASSIGNMENTS of GAME TEST MODE, be sure to exit from the test mode of SYSTEM MENU screen. The contents

IMPORTANT of setting changes are stored in the IC on the BOARD when exiting from the Test Mode. If the power is turned off in the Test Mode (before exiting), the contents of setting changes are ineffective. In this case, the settings remain unchanged.

This test mode mainly allows the IC Board to be checked for accurate functioning, monitor color to be adjusted as well as COIN ASSIGNMENTS and GAME ASSIGNMENTS to be adjusted.

  • After turning power on, press the TEST Button to have the following SYSTEM MENU. displayed.

SYSTEM MENU

RAM TEST SVS TEST SOUND TEST C.R.T. TEST SYSTEM ASSIGNMENTS~«_| COIN ASSIGNMENTS) ~+_| BOOKKEEPING _In the SYSTEM ASSIGNMENTS, ___ CABINET TYPE is set to 2 PLAYER(S), MONITOR TYPE is set to HORIZONTAL, “and SERVICE TYPE is set to COMMON.

“COIN ASSIGNMENTS initial settings as follows: *COIN CHUTE TYPE: COMMON *COIN/CREDTI SETTING: #1 *COIN CHUTE #1 (#2): 1 COIN 1 CREDIT | “SEQUENCE SETTING of COIN ASSIGNMENTS func-

BACKUP DATA CLEAR ICLOCK SETTING

DIMM BOARD TEST GAME TEST MODE [XXXXXXXXX ]

-> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON *tions as follows: (SEQUENCE 1: Number of credits required for game start (initial value = 1 CREDIT). BSEQUENCE 2: Number of credits required for CON- #TINUE & (initial value = 1 CREDIT) uSEQUENCE 3 ~ 8: NOT USED.

“MEANING OF DISPLAY IN BOOKKEEPING 2/2

  • P1 (P2) SEQ 1: Play frequency of Player 1 (Player 2) +P 1 (P2) SEQ 2: Frequency of CONTINUE by Player 1 +(Player 2). uP1 (P2) SEQ 3 ~ 8: NOT USED.
  • Press the SERVICE Button to move the arrow. Bring the arrow to the desired item and press the TEST Button.
  • Press the TEST Button in the GAME TEST MODE to display the GAME TEST MODE peculiar to this game. See the next page onward.
  • Upon finishing the test, bring the arrow to EXIT and press the TEST Button to return to the Game mode.

For detailed explanations as regards the SYSTEM TEST MODE, refer to NAOMI SERVICE MANUAL (420-6620-01).

Page 19

B. GAME TEST MODE

Bring the arrow to the GAME TEST MODE in the SYSTEM MENU and press the TEST Button to display the TEST MENU screen peculiar to Virtua Tennis 2.

<<GAME TEST MODE>>

INPUT TEST OUTPUT TEST GAME ASSIGNMENTS. BOOKKEEPING BACKUP DATA CLEAR

-> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

TEST MENU

+ Bring the arrow to the desired item with the SERVICE Button and press the TEST Button to confirm.

+ Bring the arrow to EXIT and press the TEST Button to return to the SYSTEM MENU screen.

Page 20

a. INPUT TEST

This test displays the state of each switch & button. If the display goes ON when the switch or button is activated, the connection is satisfactory.

<<INPUT TEST>>

PLAYER 1P 2P UP OFF OFF

DOWN OFF OFF

RIGHT OFF OFF LEFT OFF OFF SHOT1 OFF OFF SHOT2 OFF OFF START OFF OFF

PRESS TEST BUTTON TO EXIT

UP: Changes to ON when inclining the LEVER towards the monitor. DOWN: Changes to ON when inclining the LEVER towards you. RIGHT: Changes to ON when inclining the LEVER towards the right. LEFT: Changes to ON when inclining the LEVER towards the left. SHOT 1: Changes to ON when pressing the SHOT1 (TOP SPIN) Button. SHOT 2: Changes to ON when pressing the SHOT2 (SLICE SPIN) Button. START: Changes to ON when pressing the START Button.

Press the TEST Button to return to the TEST MENU screen.

up up t sgn t sgt 5 3 pe Fe 2 a a2 oa wo 7 Be O% @..; OOo 7 @>: @.05; START L DOWN DOWN

CONTROL PANEL

Page 21

b. OUTPUT TEST

In this test, each winner lamp of 1P/2P and 7 SEG display in the Sega versus cabinet's billboard can be checked.

<<OUTPUT TEST>>

1P SIDE CHECK 2P SIDE CHECK CLEAR CHECK -> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

+ Bring the arrow to the desired item with the SERVICE Button and press the TEST Button to have the selected item checked.

+ When "1P (2P) SIDE CHECK" is selected, various messages are indicated in the 7 SEG display while the Winner Lamp of 1P/2P is flashing. To stop the test, bring the arrow to "CLEAR CHECK" and press the TEST Button.

+ Bring the arrow to EXIT and press the TEST Button to return to the TEST MENU screen.

Page 22

c. GAME ASSIGNMENTS

In this test mode, setting for the difficulty, the number of games to take first, etc. can be changed. Select the item with the SERVICE Button and press the TEST Button to change the setting.

<<GAME ASSIGMENTS>>

DOUBLES [ ON ] DIFFICULTY [NORMAL] MATCH COUNT(CPU) [ 2 ] MATCH COUNT(VS) [2 ] MATCH COUNT(DBL) [ 2 ]

TIE BREAK (VS) [ OFF ]

DEUCE [ ON ] -> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

@ DOUBLES: Can be set to play the collaborated doubles game. If it is set to ON, you can select versus competition singles (SINGLES: VERSUS) or collaborated doubles (DOUBLES: TEAM PLAY) when you intruding into the game. When Sega versus cabinets such as VERSUS CITY etc. are used, it recommends to be set to OFF.

@ DIFFICULTY: Game difficulty setting for CPU versus mode. Selects from EASY, NORMAL, HARD and VERY HARD.

@ MATCH COUNT (CPU): Sets the number of games to win when playing in 1P mode against the CPU. Range is from | to 6.

@ MATCH COUNT (VS):Sets the number of games to win when playing in versus mode against another player. Range is from | to 6.

@ MATCH COUNT (DBL): Sets the number of games to win when playing in doubles mode. Range is from | to 6.

Page 23

@ TIE BREAK (VS): It is the rule which attaches last one game when the difference of two or more games does not appear within the number of setting games, one game is added and a score is in a line, last one game is decided by the tie-break system. The tie-break system counts numerically (5-6 etc.), and the player, which gains seven points or more and two points or more separated, serves as a winner. In addition, two serves at a time by turns. Although this rule differs from an actual tennis rule a little, it recommends using it in convention events as a fairer judgment rule.

@ DEUCE: Selects from ON, 9TIMES and OFF. If it is set to "9 TIMES", DEUCE will continue to 9 times, and will be displayed on the 10th time as "40-40", and the next point scored wins the game. If set to "OFF", even if it becomes the score of 40-40, it will not be set to DEUCE, the next point scored wins the game.

@ EXIT: Returns to the TEST MENU screen.

Page 24

d. BOOKKEEPING

PLAY DATA (PAGE 1/3)

This mode displays the playtime related data.

<<BOOKKEEPING>> PAGE1/3 PLAY DATA

PLAY TIME ED HEEL HRY HS AVERAGE TIME wer ED eM ES LONGEST TIME OH MES SHORTEST TIME eH eM ES VS AVERAGE TIME **H **M **S VS LONGEST TIME *eTT HEM *F*S VS SHORTEST TIME **H **M **S DBL AVERAGE TIME **H **M **S DBL LONGEST TIME **H **M **S DBL SHORTEST TIME **H **M **S

PRESS TEST BUTTON TO CONTINUE

@ PLAY TIME: Displays game playtime. @ AVERAGE TIME: Displays the average game time. @ LONGEST TIME: Displays the longest game time. @ SHORTEST TIME: Displays the shortest game time. @ VS AVERAGETIME: Displays the average versus game time. @ VS LONGEST TIME: Displays the longest versus game time. @ VS SHORTEST TIME: Displays the shortest versus game time. @ DBL AVERAGE TIME: Displays the average doubles game time. @ DBL LONGEST TIME: Displays the longest doubles game time. @ DBL SHORTEST TIME: Displays the shortest doubles game time.

  • Press the TEST Button to migrate to the next page (2/3).
Page 25

W0D‘AIIAAASNIS MMM. £T “90198 ANAW LSAL 94} 0} winjos 0) uoyNg LSAL oy) ssoig. + see see sek sek see sek sek sek woke sek sek woke woke sek sek eke

woke woke see sek woke sek sek see sek sek see see see sek sek woke VLVdC YaLOVAVHO e/edOVd <<ONIdHaNAOOU>>

LIxd OL NOLLNE LSAL SSaud ASOTSA NIMSA_ LOUTAS

axx (VSMNOSNAAALS seek (onNomiod sek (dSM)ZAHONVS sek (vuDaoudld week (vsm)saTas xxx (WSO).LYOUNAAVG xxx (VSO) SNVITIIM S axe (VSO) SAVITIIM A soto (dSM)VAOW sek (AMS)NVWUON sek (AMS)LSIAONA sek (aaD)SVVH xxx (SQWAOMINTAIVA seek (VuDANITOId soto (idD) NVIWNAH see (snv) waLava “pote -SIP 918 OPOUL SNSIOA UT SOSOI/SUIM JO JaquINu oy} puke ‘Aouanbay JoaJas Jo}ovIeYO-Ag_ (€/€ FOVd) VLVC UALOVUVHO “(€/¢) oSed yxou oy} 0} OJLISIUT OJ UONG LSAL ssug ¢/TADVd WVYDOLSIH ANIL <<DNIddaaAAOOd>>

ANNILNOO OL NOLLNA LSAL SSaud SooWOI ¥waAO S6SINGO - SOLWGO S6ZINGO - SOOWWGO S6SIW80 - SO<W80 S6ZIN80 - SOOW80 S6SINLO - SOSWWLO S6ZINLO - SOOWLO S6SIN90 - SOEW90 S6ZIN90 - SOOW90 S6SINSO - SO<WSO S6ZINSO - SOOWSO S6SINP0 - SO<WPO S6ZINPO - SOOWPO SOSINEO - SOLO S6ZINEO - SOOWEO S6SINZO - SOSWZO S6ZINZO - SOOWZO S6SIN10 - SOSW10 S6ZIN10 - SOOW10 S6SIN00 - SOOO S6ZINOO - SOOWOO “potedsip st Aouanboy Avjd oumvyd-hgq (€/t FDVd) NVUADOLSIH AWLL

Page 26

e. BACKUP DATA CLEAR

This allows the contents of BOOKKEEPING to be cleared.

<<BACKUP DATA CLEAR>>

ALL CLEAR -> EXIT(CANCEL)

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

+ When clearing, bring the arrow to "ALL CLEAR" with the SERVICE Button and press the TEST Button. When the data has been cleared, "COMPLETED" is displayed.

+ Bring the arrow to "EXIT" and press the TEST Button to return to the TEST MENU.

Page 27

According to your DIMM BD type, attach the correct sticker as follows.

442-00084B-01 (STICKER 840-0084B-01) Attached place

PART NO. DESCRIPTION

® 840-0001F ASSY CASE NAO DIMM BD COM

© KEY CHIP (Oe) 840-0084B-01 DIMM BD NAO VT2

Attached place

PART NO. DESCRIPTION

@) 840-0004F ASSY CASE NAO DIMM BD COM RTOS

@ KEY CHIP O:@ 840-0084B-02 RT DIMM BD NAO VT2

Page 28
  • SOFT KIT

S Handling the GD-ROM Disc

@ Do not contaminate the discs with your

IMPORTANT fingerprints or dust particles. Contaminated

discs may lower audio and video quality. When cleaning the discs, do not use volatile chemicals (benzine, thinner, etc.), cleaning sprays, and antistatic agents. Do not use cracked, warped, or damaged discs. Use clean cloth to wipe Do not attach papers or seals onto the discs; do the disc gently and into a not scratch the discs. radial direction. Do not use the discs with a sign of peeled seals, tapes, etc. Observing these instructions, do not insert such a non-usable disc into the GD-ROM drive. Otherwise the inserted disc can not be ejected. When cleaning a heavily contaminated disc, use clean cloth that has been soaked in water and squeezed. Then remove moisture with dry cloth. When holding a disc, be careful not to contaminate it with your fingerprints.

How to Hold a Disc

With both hands: With one hand: Put your thumbs and forefingers of both Insert your forefinger into a central hands on the disc's 4 circumference tips. hole and at the same time put your thumb and middle finger on the disc's 2 circumference tips.

How to Handle the Key Chip @ = The key chip is a precision device. Handle it carefully because it may be damaged by heat, shock, and static electricity. @ Use the key chip with the GD-ROM disc of the corresponding game that has been shipped together with the key chip.

Page 29

When you order the GD-ROM disc only, please mention the Part No. 610-0625-#««.«.

PART NO. DESCRIPTION

O+O@+O+®@610-0630-0015GD SOFT KIT VT2 ENG

© NAOMI GDROM VT2 @ KEY CHIP

©420-6621-0015ESERVICE MANUAL VT2 ENG
@253-5507DISC CASE WITH IC HOLDER
@+®@610-0625-0015GD SOFT VT2
Page 30
  • GAME BOARD

@ Do not expose the Game Board so as to avoid causing an accident or malfunctioning.

CAUTION! @ Static electricity discharge can damage electronic parts on the IC Board.

Manual. Before starting work by opening the Shield Case Lid, be sure to touch grounded metallic surfaces to discharge physically charged static electricity. @ When replacing the Game Board, refer to the CVT Manual and Instruction

PART NO. DESCRIPTION

ASSY CASE (@+@) 840-0084D-01 840-0084D-02 840-0084D-03 840-0084D-04 ASSY CASE NAO VT2 USA ASSY CASE NAO VT2 EXP ASSY CASE NAO VT2 KOR ASSY CASE NAO VT2 AUS :USA :OTHERS :KOREA :AUSTRALIA

(0) ASSY CASE NAOMI

840-0001A-01 ASSY CASE NAOMI MAIN BD USA — :USA MAIN BOARD 840-0001 A-02 ASSY CASE NAOMI MAIN BD EXP :OTHERS 840-0001 A-03 ASSY CASE NAOMI MAIN BD KOR :KOREA 840-0001 A-04 ASSY CASE NAOMI MAIN BD AUS | :AUSTRALIA

  • ROM CASE 840-0084C ROM CASE NAO VT2
Page 31

B) : 4 (L/L) WVYSVIG ONIMIM

£09 “TWSYSAINN LD INOVN ae sym ayi yo 5016 sia sorvoipus spe $

bf f “G3NOLLNAW3YO4 JAOSW SHL 38 8 NVHL Y3HLO JOVJ¥3LNI WWE 3 = ° HL OL JOWW SNOILIINNOD S ° ON 39 OL 3YV 3YSHL ‘3LON 3 ne ALNd1N1O YLNNOD NIOD - 3 Bo SNYNLIY GNNOYD HOLIMS . r =

SLNANI HOLIMS . _ NO O3GIA. Bus __ I sFav GaSN SNOILIINNOD WANE z ose-isiz008 -

0s0:2429-009 t8

are L ae 5 8 eur jo CS & 7 i ary a ° 8 Nid © cee or) . eg z a wo y 2 q o fd 8 : #| oxo © »8 VEREUY WOU 8 | 5 as a

a ee a _ s 3 Dat acziow = 53 z= é IM MO} &2 ar z eax OL ° 5 EE 3 ees 38 YBLNNOO NIOO :

as EEE 28 i ges Biuass & "roa 58 L

gts ods petty 5 (garuq wou ad] [es3x9 Hoz dV ¥3MOd O1GNV 9L9EL-8E8

r 5 1 : t

Page 32

Warranty

Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.

Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.

Page 33

SEGA ENTERPRISES, INC. (USA)

45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax