Great Swordsman
Great Swordsman (World?) (Allumer / Taito Corporation, 1984) · Document · 14 pages · 3 sections · original scan
TSP ORLING OWE
Greate Swowoynal!
TE WG ANTHEA CK SAGE,
3043 KASHIWA STREET, TORRANCE, CA 90505 Telephone: (213) 539-2744
> BEFORE YOU GET STARTED...STOP! ©
- Does your aay GEM package include all listed parts? (Is it complete?)
- 1s the game you have chosen to transform able to supply all the required voltages for the Gane?
- Is the monitor configuration compatible? In most games it is rather difficult to change the monitor from a vertical mount to a horizontal mount. We recommend you choose o game cabinet with the same mount as your GYWy GRD requires.
4} Do you have the necessary tools? (See the recommended tool list)
CAUTION
F.C.C. REGULATION COMPLIANCE
THE PC. BOARD CAGE SUPPLIED WITH THIS NEW GAME KIT MUST BE UTILIZED AND TERMINATED TO GROUND AT THE TIME OF INSTALLATION. THIS IS TO AVOID RADIO FREQUENCY RADIATION AND COMPLY WITH THE LIMITS FOR A CLASS "A" COMPUTING DEVICE PURSUANT TO SUB-PART "J" OF PART 15 OF F.C.C. RULES, WHICH ARE DESIGNED TO PROVIDE REASONABLE PROTEDTION AGAINST INTERFERENCE WHEN OPERATED IN A COMMERCIAL ENVIRONMENT. OPERATION OF THIS EQUIPMENT AN A RESIDENTIAL AREA IS LIKELY TO CAUSE INTERFERENCE - IN WHICH CASE, THE USER AT HIS OWN EXPENSE, WILL BE REQUIRED TO TAKE WHATEVER MEASURES MAY BE REQUIRED TO CORRECT THE INTERFERENCE.
NEW GAME PACKAGE CONTENTS:
1- MAIN PRINTED CIRCUIT BOARD (PCB)
1- PCB CAGE (FCC REQUIRED)
1- CONNECTING WIRE HARNESS
1-2- WAY JOYSTICK
6- PLAYER BUTTONS
1- MARQUEE
|1- CONTROL PANEL OVERLAY 1- PLEX CONTROL COVER
1- SET PLAY INSTRUCTION & FUNCTION LABELS
\- NEW GAME PACKAGE INSTALLATION MANUAL
@ POWER REQUIREMENTS | MONITOR REQUIREMENTS Y iA A +5 VDC HORIZONTAL MOUNT +12 VDC NEGATIVE COMPOSIT SYNC | 2s
| con 3 | CON 5 | G CONRECTOR |
| 1 | IP sHooT 2 | SOLDER SIDE | COMPONENT SIDE |
off | 2] iP sHOOT 1 S¥ GMD y Gf a te suoot 3 2P_ SHOOT 3 SY GND Be [4} iP vert 2P LEFT Sy +3¥ Ro \s | iP RIGHT zp RtcHT
| 6] GND | +12V | +hey |
| SOUND OUT (+) | SO) | out(=) |
TIDEO SYNC VAREO RL COLIN PULSE
SOUND VR
@ INCREASE oa) & a} SWia svoB (DIP sw) SELECT-2
wa THE CONTROL OF THTS GAME USES ONE 2—-¥AY JOYSTICK AND THREE PUTTONS,
‘hy NOTE) BEFORE CHANGING THE SETTINGS OF TKE DIP S¥ITCH. > TURN THE POWER SWITCH 9 Ri THE DIP SWITCH-C IS MOUNTED ON THE LOVER roe ass.
aA + SETTING OF DIP SWITCH A Cayefactosy sertine Rae SETTING Positron] « | 2 a 3 COINS —1 PLAY 4 COINS —I PLAY 2 COINS —1 PLAY PLAY PRIGING 1 COUN —10 PLAYS | oer 1 COIN ~3 PLAYS 1 COIN —é PLAYS TCOIN —2_ PLAYS © 1 COIX =I PLay
| + SETTING OF DIP SWITCH B | if | SETTINGS | |||
| SETTING | POSITION 1 | z | 3] « | s}|s1 | 7 | 8 |
DIFFICULTY FENCING STAGE AME s EASY
| lLEvet _ KENDO | DIFFICULTY | wer |
sTaAcE [s easy ROMA DLFFICULTY stace [+ _€as¥ . HEARD ATTRACT SOUNDS WO HEARD
FREE GAME
| AME ROUND | + NORMAL | OFF |
« SETTING OF DIP SWITCH C (#):FACTORY SETTINGS
SETTING POSITION ttatstetstelata FREE PLAY m FREE PLAY
GANE STYLE
| Orr | [ox for) | org |
Fl ow START STACE OFF
o FANCING orf [OFF
| | | [| —_twverstox | | On |
| TV MONTTOR | SHO THWERS10N | OFF |
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
$ SOMETHING TQ THINK ABOUT $
Your finat product willbe a @@Z? Gag.
You have made a wise decision to transform a game that has seen better days in the ail important cash box into a @ay gaa. This is by far the most cost effective alternative to maximize the return of your initial investment. All you provide is the cabinet with a power supply and a monitor. Oh yes, you wiil need a touch of elbow grease. And that's it! We provide the rest. The end result is ... A Ga GEM at a very low cost.
FACT: Spend a little time on the cabinet's appearance [i.e. marques, contro! panel and cabinet graphics]. With a little paint, some wood putty and new lights, you will raise the profits of any game...especially with the introduction of a GQ GENa@ package.
The GG? gRRA| look should always apply to the Inside of your game as well as the outside. A few wire ties and shrink tubing on your harness; some fastening hardware on your subassemblies and a sweep with the ol’ vacuum cleaner will ensure that unnecessary Glitches do not occur.
REMEMBER: You are creating a QQ? GYR? -
If you have any questions or just need some advice on any of your BID GEREKZ transformations, don't hesitate in gluing a member of our technical staff a call.
Phone: (213) 539-2744 Telex: 182426
© LETS GET OUR HANDS DIRTY {)
PREPARING THE ORIGINAL GAME FOR THE game
Remove the following:
- Main logic board(s)
- Control panel
- Monitor plexiglass
- Monitor Bezel
- Marquee
- Graphics
{ would recommend painting your cabinet to give it a fresh new look. (If it is geographically inconvenient to make use of our facilities, you msy consider having an suto body shop take care of your painting needs.)
'f you intend to use your original plexiglass, be sure it is in mint condition or it should be replaced.
Thoroughly clean out your cabinet.
TIME TO INSTALL YOUR NEW 6OODIES
BEFORE YOU START... REMEMBER DO NOT DO THIS WORK WITH THE POWER ON!
LOGIC P.C.B. CAGE
Mount the logic cage securely (away from power supply).
A) Mark and drill pilot holes (3/32"). B) Place the logic cage (required by FCC) over the holes and secure it with some of the wood screws you have lying around the shop. Use enough screws to be sure the cage is secure to the cabinet wall. C) Install the P.C.B. into the logic cage.
WIRE HARNESS
Attach the wire harness connector to the main logic board.
CONNECTING THE WIRE HARNESS TO THE EXISTING IDIRES:
When you hook up the control panel, power supply, monitor or other subassemblies that remain in the game cabinet to your new wire harness, try and use their existing secondary connectors.
- Cut the original wire approximately three inches from the original connector. Strip off about one half inch of the insulation.
- Solder the new wire designated for that position to the original wire you just stripped.
- Melt shrink tubing around all your in-line wire connections. Do not use electrical tape. Tape could unravel over a period of time due to the cabinet heat and cause you a great deal of trouble.
- Use wire tie wraps, and secure the cable to the cabinet whenever it seems necessary. Remember this is a Gika@ nota sloppy conversion.
POWER WIRES:
- Connect the wires that are designated for your power supply. You will need a supply of +5V, +!2V & ground. Your gay package may not require all of the voltages that were used in the original game. Tie off any unused wires.
- You will notice that you probably have more than one wire for each voltage. It is a good idea to use all wires supplied (double up if it is necessary). This will help to ensure that you don't overload the edge connector pins and cause them to "burn".
MONITOR WIRES:
You will be connecting the wires designated for the RED, GREEN & BLUE video guns along with the SYNC & GROUND wires.
Your Qa GEE only calls for one sync wire connection, this is called compass? sync (horizontal and vertical tied together). This composit sync is also #egefive. Most monitors have supply positions for both negative and positive sync. You can check your monitor manual or call our technical department for assistance
SP. w 4
Find the two wires that are designated for the speaker and hook ‘em on up.
COIN DOOR WIRES:
- Connect the designated wires to the coin switches and meter.
- You can connect your door lamps to the unused -5V power supply. Some games have separate power outputs for the coin door lamps.
GUESS WHAT? You are almost done with the electrical connections of your GMg. All you have left is the control panel wiring. But we are going to hold off on that for right now. We have a few other things we need to do first. So why don't you go ahead and get yourself a drink of water and stretch your legs. When you return, we can take a fresh look at your progress and then move forward.
f SMOKE TEST f
WHAT TEST? Don't worry. All this means is that you are ready to apply power to the system for the first time and you pray that there will be no smoke from a simple oversight.
You are just about ready to power up the logic board. But first we need to recheck your work.
1)
2)
a
4) Carefully inspect the game for loose power wires, exposed connections and extra fastening hardware.
Make sure the logic board, board cage, monitor and power supply are securely fastened in place.
Double check the connectors to be sure they are wired and hooked up properly.
Set the dip switches on the logic board to the factory recommendations. Also, be sure you set the dip switchs for “DEMO WITH SOUND". This will enable you to hear as well as see that your new P.C.B. is functional.
TIME TO APPLY POWER:
2) Look and smell for smoke. (TURN OFF IMMEDIATELY IF ANY IS NOTICED)
Listen for game sounds. If after one minute you have not heard any sounds: A) Check for proper dip switch settings. B) Adjust volume control and check speaker connections. C) Check the +12V power supply to the logic board
] How is the monitor image? fA)
B) Is the picture in sync? if your picture has the top and bottom halves of the screen reversed and it will not stop rolling, change your sync polarity on the monitor. (Positive to negative). If your monitor does not have dual polarity positions for sync, then you will need to reverse the sync yourself by installing o simple one 1.C. circuit between the logic board and the monitor. (The following illustration shows a hookup for both cempesiie and separate syncs.
5S Vee HORIZONTAL SYNC INPUT FROM P.C.B. {OR COMPOSITE SYNC INPUT)
HORIZONT AL SYNC QUTPUT TO MONITOR
(OR COMPOSITE SYNC OUTPUT) VERTICAL SYNC INPUT FROM P.C.B.
VERTICAL SYNC QUTPUT TO MONITOR
NOT USED
GROUND
Now how's your picture?
- Is it centered? ® Is it too bright or dim? © Is it in focus? Check your monitor manual for these adjustments. If your screen looks "off", then your @awy Qexgng transformation may have been in vain. So let's take the time to make the monitor look great
® CONTROL PANEL ASSEMBLY &
- Remove the buttons, joysticks and wire harness and put them aside for now. Do not remove the original panel overlay until the new holes have been drilled.
2)
xa
5)
6)
7)
8) Mark positions on the panel for the new holes as specified in your @GM7 Gay manual.
ROMSTAR supplies a clear 1/8" thick piece of plexiglass with every GZ) Giada package to cover the control panel. We feel that your gawe investment is well worth protecting...and the control panel is the first place to show wear and tear.
- You will need to cut this piece to size. Use the control panel as a template.
- Use a razorknife to score the plexiglass deeply. Then use a pair of pliers to break away the extra plexiglass.
Now drill the holes in your panel that you have marked off for the butions, joystick and basis. HINT: For best results, use @ chassis or sheet metal punch for button holes.
Drill the same holes on your pleniglass panel protector. Once again use your pane! as a template. HINT: To avoid chipping while you are drilling the holes, place the plexiglass securely on a soft wood surface and use a plexiglass drill bit and hole cutter.
The holes are now all cut. Smooth them out on your panel and plexiglass with a fine toothed file.
Remove the original graphics overlay from the panel. Clean up the Panel and install your QQ (FGRZAG graphics. MAKE IT EASIER: Peel the top half of the protective backing off of your BQO Ganga graphics. Start from the center and smooth out your overlay. Make sure you have about an inch extra coming off the top. Ae 2vit/es p/eese. Now peel off the bottom half and do the same as you did for the top.
Adhere the instruction and function lables. (Jump, Fire, Players 1 & 2, Ete3
Install the Plex Control Cover over your completed Ay Gage panel.
- Mount the joystick and the buttons to the panel and wire them up. (Use the existing Panel wiring if possible)
Y MARQUEE INSTALLATION Y
Using the original marquee as a template, Center your QQgy ERM@F Marquee graphics and score the new marquee deeply to fit the cabinet. Break off the excess with pliers. Be sure the light behind the marquee works. Everything should always work on a new game.
Take your time... Son't forget this is going to be a QQ gang.
f FINISHING TOUCHES /
- Check the game inside and out for any imperfections. Secure any loose wiring or fastening hardware.
- Make sure the coin door is tight and the coin mechs are well adjusted. A game is no good to anybody if you can't get a coin into it.
- Once again go over every step of this QQ transformation in your mind. Be sure everything is correct and to your liking.
- Power up the game. A) Check all the coin switches. (Does the coin meter work?) B) Play your Gay Gawe. @ Are all the player controls working? ® Are the game sounds present? ® \s the volume level proper? ® Are the dip switches set properly?
Weill, thats about it. Good Luck .
4, RECOMMENDED TOOLS AND SUPPLIES 44),
Is” romstar GOD package.
PHILLIPS AND SLOT SCREW DRIDERS SOCKET SET ENTHUSIASTIC ATTITUDE WIRE CUTTERS AND STRIPPERS PLIERS OR CHANNEL LOCKS PLANNING AND CAREFUL THOUGHT ELECTRIC DRILL 3/32" © 1/4" © 7/16" DRILL BITS 1/4" PLEX BIT 11/4" CHASSIS OR SHEET METAL PUNCH 11/4" PLEH HOLE SAW GLASS OF WATER AND A SNACK SMALL FILE RAZOR KNIFE AND SHARP BLADES STRAIGHT EDGE PATIENCE PAINTING SUPPLIES (if you do your own painting) © PAINT BRUSH AND PAINT (don't forget the primer) © PAINT ROLLER AND PAN e SAND PAPER © PUTTY KNIFE AND WOOD PUTTY A GOOD NIGHTS SLEEP STAPLE GUN AND STAPLES SOLDERING IRON AND 60/40 RESIN CORE SOLDER VACUUM CLEANER ASSORTED FASTENING HARDWARE SHRINK TUBING: 3/32" © 1/8" © 3/16" MASKING TAPE COMMON SENSE 31/2" OR 4" WIRE TIES SPRAY WINDOW CLEANER AND RAGS (baby diapers work GREAT!)