Arabian TM-237 1st Printing
Arabian (Sun Electronics, 1983) · Technical Manual · 72 pages · 64 sections · original scan
TM-237 1st printing
Operators Manual
With Illustrated Parts Lizts
< ¢ t
Manufactured under license from Sun Electronics Corporation.
If reading through this manual does not lead to solving a certain maintenance problem, call TELEHELP® at the Atari Customer Service office in your geographical area, as shown below.
WEST and CENTRAL U.S.A. Parts and Service
Atari, Inc. California Customer Service Office 1105 N. Fair Oaks Avenue P. O. Box 427, Sunnyvale, CA 94086 Telex 17-1103 (Monday-Friday, 7:30-4:00 pm Pacific Time) Ss From California, Alaska, or Hawaii (408) 745-2900 s Service from anywhere in the area shown in white toll-free (800) 538-1611
EAST U.S.A. Service only
Atari, Inc. New Jersey Customer Service Office 12A World's Fair Drive, Somerset, NJ 08873 Telex 37-9347 (Monday-Friday, 7:30-4:00 pm Eastern time) FO From New Jersey (201) 469-5993 From anywhere else in this area s toll-free (800) 526-3849
EUROPE Parts and Service
Atari Ireland Limited European Customer Service Office Tipperary Town, Ireland Telex 28-165 TIPPERARY TOWN, (Monday-Friday, 9:00-6:00 pm GMT) IRELAND
BS 0602-52155
ss RY
Operators Manual
ts With Illustrated Parts Lis’
Arabian
© 1983 by Atari, Inc. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher. The game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the U.S. Copyright Act of 1976. This Act provides for increased penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articies. In addition, the Act provides for payment of statutory damages of up to $250,000 in certain cases. Infringers may also have to pay costs and attorneys’ fees, and face an imprisonment of up to five years Atari will aggressively enforce its copyrights against any infringers. We will use all legal means to immediately halt any manufacture, distribution, or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.
Published by: ATARI, INC. 790 Sycamore Drive P.O. Box 906 Milpitas, California 95035
Printed in the U.S.A. 4M
Notice Regarding Non-ATARI Parts
Use of non-ATARI parts or modifications of your ATARI game circuitry may adversely affect the safety of your game, and injure you or your players.
You may void the game warranty (printed on the inside back cover of this manual) if you do any of the following: © substitute non-ATARI parts in the game
- modify or alter any circuits in the game by using kits or parts 7ot supplied by Atari.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart] of Part 15 of Federal Communications Commission (FCC) Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area or modification to this equipment is likely to cause interference in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference. If you suspect interference from an ATARI® game at your location, check the following: © Allgreen ground wires in the game are properly connected as shown in the game wiring diagram, © The power cord is properly plugged into a grounded three-wire outlet. © The game printed-circuit board(s) (PCB) is properly installed within the Electromagnetic Interference (EMI) cage. © The EMI Shield PCB is properly installed and connected in series with the game PCB harness, ¢ All filter capacitors required on the EMI Shield PCB are properly soldered in place. If you are still unable to solve the interference problem, please contact ATARI Customer Service. See the inside front cover of this manual for service in your area. Arabian
iii
Arabian
Table of Contents
1 Set-Up Procedures Introduction... 2. ....06 6000... eee ot A. Installation Specifications . . vena beeen eee sees 13 B. Inspecting the Game.............. oe tee sere 43 C. Voltage-Plug Selection & Fuses . 1-4 D. Switch Locations bonnes : . : 15 E, Selecting the Coin & Credit Options... . 2.6... 0. cee e eee eee 15 Fo Game Play... . eee eee poten ee 1-7
2 Self-Test Procedure Master Self‘Test Display .. Game Controls Test . . Sound Test . Convergence Display .. ee . 2 * . ‘ Color Test and Character Display . 2... 0c eee eee 24 BOOR p>
3 Troubleshooting Procedures A. Troubleshooting Aids... 0.06. tees 3-2, B, Troubleshooting Techniques 00.0... 6.0.06 e cece eee 3-3
4 Maintenance and Repair Procedures A. Cleaning Requirements... ... 4-2 B. Opening the Control Panel . . . 4-2 C. Joystick Leaf Switches . 42 D. Joystick Assembly . . . 42 E. Pushbutton Leaf Switches 43 E Start Switches ........... 43
5 Illustrated Parts Lists Cabinet-Mounted Assemblies . . Control Panel Assembly ... . 8-Position Joystick Assembly . . . Fluorescent Tube Assembly .. . . Atari Video Display Assembly . . Electrohome Video Display Assembly . Utility Panel Assembly Vertically Mounted Coin-Door Assembly. . . . American-Made Coin-Door Assembly . Power Supply Assembly Electromagnetic Interference (EMI) Cage Assembly and PCB Mounting Hardware .. EMI Shield PCB Assembly . . . Arabian Game PCB Assembly . . Regulator/Audio {I PCB Assembly . .
List of Mlustrations
Figure 1-1 Figure 1-2 Figure 1-3 Figure 2-1 Figure 2-2 Figure 2-3 Figure 2-4 Figure 4-1
Figure 5-1 Figure 5-2 Figure 5-3 Figure 5-4 Figure 5-5 Figure 5-6 Figure 5-7 Figure 5-8 Figure 5-9 Figure 5-10 Figure 5-11 Figure 5-12 Figure 5-13, Figure 5-14
Table 1-1 Table 1-2 Table 1-3 Table 1-4 Table 2-1 Table 2-2 Table 2-3 Table 2-4 Game Overview Voltage-Selection Plug and Fuse Locations . Switch Locations Master Self-Test Display . . Sound Test Display . . Convergence Pattern Display Color-Bar Display : Wire Connections for Leaf Switches . .
Illustrated Parts Lists Cabinet-Mounted Assemblies . . Control Panel 8-Position Joystick .......... Fluorescent Tube and Speaker . Atari Video Display Electrohome Video Display .. . Utility Panel Assembly .... . Vertically-Mounted Coin-Door . American-Made Coin Door . Power Supply Assembly . . Printed-Circuit Board Moun Ig Hardware . EMI Shield PCB Assembly . Arabian Game PCB ‘Assembly . Regulator/Audio I! PCB Assembly .
List of Tables
Installation Requirements. .... Switch Settings for Coin and Credit O; Switch-Settings for Special Options ........ Arabian Scoring Table ROM Locations..... Sound Test Index Color-Bar Display Colors . . Character Display List 5-2
5-6 5-8 5-10 5-11 5-12 5-13 5-16 5-19 » 5-22 » 5-24 . 5-26 . 5-33
1-8 Arabian
Arabian
vi
Safety Summary
The following safety precautions apply to all game operators and service personnel. Specific warnings and cautions will be found throughout this manual where they apply.
A WARNINGS A
Properly Ground the Game. Players may receive an electrical shock if this game is not properly grounded! To avoid electrical shock, do not plug in the game until it has been inspected and properly grounded. This game should only be plugged into a grounded 3-wire outlet. If you have only a 2-wire outlet, we recommend you hire a licensed electrician to install a grounded outlet. Players may receive an electrical shock if the control panel is not properly grounded! After servicing any parts on the panel, check that the ground wire is firmly attached to the metal tab on the inside of the control panel. Only then should you lock up the game. AC Power Connection. Before connecting the game to the AC power source, verify that the proper voltage-selection plug is installed on the game’s power supply. Disconnect Power During Repairs. To avoid electrical shock, disconnect the game from the AC power source before removing or repairing any part of the game. When removing or repairing the video display, extra precautions must be taken to avoid electical shock because high voltages may exist within the display circuitry and cathode-ray tube (CRT) even after power has been disconnected. Do not touch internal parts of the display with your hands or with metal objects! Always discharge the high voltage from the CRT before servicing this area of the game. To discharge the CRT: Attach one end ofa large, well-insulated, 20-kV jumper to ground. Momentarily touch the free end of the grounded jumper to the anode by sliding “itunder the anode cap. Wait two minutes and discharge the anode again. Use Only ATARI Parts. To maintain the safety integrity of your ATARI game, do not use non- ATARI parts when repairing the game. Use of non-ATARI parts or other modifications to the game circuitry may adversely affect the safety of your game, and injure you or your players. Handle Fluorescent Tube and CRT With Care. If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly six feet or more from the implosion. Use the Proper Fuses. To avoid electrical shock, use replacement fuses which are specified in the parts list for this game. Replacement fuses must match those replaced in fuse type, voltage rating, and current rating. In addition, the fuse cover must be in place during game operation.
Set-Up Procedures
How to Use This Manual
This manual, written for game operators and service technicians, describes the Arabian™ game. Chapter 1 contains a game overview, game specifications, inspection procedures, voltage plug and fuse information, switch locations, option information, and a description of game play. Chapter 2 contains self-test procedures. Chapter 3 contains troubleshooting procedures. Chapter 4 contains maintenance and repair procedures. Chapter 5 contains illustrated parts lists. Figure 5-1 illustrates the game cabinet. Notes in this chapter refer you to other places in the manual for more detailed information. A glossary of terms is in the back of this manual for your convenience, Schematic diagrams of the game circuitry are included as a supplement to this manual.
Game Overview
You'll have 1001 hours of fun with the ARABIAN upright game! You are the adventurous Arabian prince, and your goal is to rescue the princess from her palace, Use the joystick control and the KICK button to move through perilous passages. Sail the seas, crawl in caves, and fly magic carpets—you 'll be challenged by 4 increasingly hard waves of play! Score points on the way for picking up the letters in “A-R-A-B-I-A-N,” and get a bonus if you pick them up in order! All major parts of the cabinet are illustrated in Figure 1-1.
Chapter 1
Set-Up Procedures
Fluorescent Tube & peaker See Figure 5-4
Video Display * See Figure 5-5 or 5-6
8-Position Joystick See Figure 5-3
Regulator/Audio II PCB See Figure 5-14
Control Pane See Figure 5-2 Power Supply * See Figure 5-10
Coin Door Power On/Off Switch See Figures 5-8 & 5-9
Utility Panel See Figure 5:7
- Item with a serial number label
Figure 1-1 Game Overview
1-2 Arabian
Game Identification Label *
Deflection PCB x Used with Atari Display See Figures 55 & 5-11
Game PCB x Inside EMI Cage See Figure 5-13 EMI Cage See Figure 5411
EMI Shield PCB See Figure 512
Arabian
A. Installation
Specifications
Table 1-1 describes the physical, electrical, and environmental specifications of the game.
Table 1-1 Installation Requirements
Characteristic Requirement
Power Consumption 200 W ‘Temperature 0° to +32°C (+32° to +100° F) Humidity Not to exceed 95% relative Line Voltage 100 to 240 VAC Width 67.95 cm (26.75 in.) Depth 64.14 cm (25.25 in.) Height 180.34 cm (71 in.)
B. Inspecting the Game
Please inspect your game carefully to ensure that it was delivered to you in good condition. Examine the exterior of the game cabinet for dents, chips, or broken parts. Remove the screws from the rear access panel. Unlock and open this panel and the coin door. Inspect the interior of the game as follows: a. Ensure that all plug-in connectors (on the game harnesses) are firmly plugged in. Replug any connectors found unplugged. Do not force connectors together. The connectors are keyed so they only fit in the proper orientation, A reversed edge connector may damage a printed-circuit board (PCB) and will void your warranty. b. Ensure that all plug-in integrated circuits on each (PCB) are firmly plugged into their sockets. c. Remove the tie-wrap that secures the coiled power cord inside the cabinet. Inspect the power cord for any cuts or dents in the insulation. Repair of replace it as required. Place the square strainrelief plate in the wood slot at the bottom of the rear panel opening. d. Inspect the power supply. Make sure the fuse block cover is mounted in place. Check that the green ground wire is connected. e. Inspect other major subassemblies, such as the control panel, video display, EMI cage, andeach PCB. Make sure they are mounted securely and that the green ground wires are connected.
Set-Up Procedures
C. Voltage-Plug Selection
and Fuses
The power supply in your game contains six fuses. When you replace a fuse, use the identical type fuse with the same electrical rating (see Figure 1-2). This power supply operates on the line voltage of many countries. The power supply comes with either one, two, or three voltage-selection plugs. Plug voltages and wire
Fuse F2 44, 250V
Fuse F3 20A,32V
Fuses F4-F6 4A, 250V Arabian
colors are 100 VAC (violet wire color), 120 VAC (yellow wire color), 220 VAC (blue wire color), and 240 VAC (brown wire color). See Figure 1-2 for placement of the voltage-selection plug. Before plugging in your game, check your line voltage. Next, check the wire color on the voltage-selection plug. Make sure the voltage-selection plug is correct for the line voltage of your location. Now plug the game into a grounded 3-wire outlet.
J3
Fuse cover is shown in Figure 5-10.
Figure 1-2 Voltage-Selection Plug and Fuse Locations
Arabian,
D. Switch Locations
Power On/Off Switch The power on/off switch is located on the back of the cabinet on the lower left side (see Figure 1-1).
Utility Panel Switches The volume control, coin counter(s), self-test switch, and auxiliary coin switch are on the utility panel. The utility panel is located inside the upper coin door (see Figure 1-1). The volume control adjusts the level of sound produced by the game. The coin counter(s) records the number of coins entered into the game. The self-test switch initiates the self-test mode. The auxiliary coin switch credits the game without activating a coin counter. See Figures 1-3 and 5-7 for details of these switches.
Option Switches Option switches for game price selection are on the game PCB at location SW1 (see Figure 1-3).
Auxiliary Coin Switch
Coin Counter’
Self-Test Switch
Volume Control To increase, turn clockwise Set-Up Procedures
E. Selecting the Coin and Credit Options
Settings for the option switches are listed in Tables 1-2 and 1-3. Note that options preset at the factory are shown by the ~4 symbol. You may change the settings according to your needs, To verify other option selections, check the self-test display that appears when you turn on the game. Then, verify the option switch settings on the self-test display as described in Chapter 2. Table 1-2 describes the settings for the DIP switch designated SW1. This switch selects the game coin and credit options available for the left and right coin mechanisms, Table 1-3 describes the settings for the DIP switch designated SW2. This switch selects special options (such as sound in the Attract Mode, and bonus life levels). The basic unit of measurement is a coin worth $.25 or 1 DM. Thus, if you have a 1 DM/2 DM coin door with two coin counters, set switches 5 and 6 at location SW1 to on. Then, different denominations are counted on the two coin counters.
Game PCB
Figure 1-3, Switch Locations
Set-Up Procedures Arabian
Table 1-2. Switch Settings for Coin and Credit Options
Settings of 8-Ioggle Switch on Arabian Game PCB at location SW1 near RA12
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Option |
Off 3 boys <4 On 5 boys Off Cocktail cabinet On Upright cabinet <4 Off Reverse picture frame position On Normal picwure frame position <
Off Easy game difficulty 4 On Hard game difficulty
Left Coin Right Coin
Mechanism Mechanism
| Off | Off | off | Off | lcoin | = lcredit | {coin = 1 credit < |
| On | Off | Off | Off | 2 coins = 1 credit | 2 coins | credit |
| Off | On | Off | Off | 2coins = 1 credit | 1 coin | 3 credits |
| On | On | Off | Off | lcoin | = 1 credit | lcoin = 2 credits |
| Off | Off | On | Off | lcoin = 1 credit | lcoin = 3 credits | |
| On | Off | On | Off | 1coin | = 1 credit | lcoin = 4credits |
| Off | On | On | Off | lcoin = I credit | lcoin | 5 credits |
| On | On | On | Off | lcoin = 1 credit | lcoin = 6 credits | |
| Off | Off | Off | On | lcoin = 2 credits | lcoin | = 2 credits |
| On | Off | Off | On | lcoin = 2 credits | \coin = 4credits | |
| Off | On | Off | On | 1coin = 2 credits | lcoin | = 5 credits |
| On | On | Off | On | lcoin = 2 credits | lcoin | = 10 credits |
| Off | Off | On | On | lcoin | = 2credits | lcoin = 11 credits |
| On | Off | On | On | lcoin = 2 credits | lcoin = 12 credits | |
| Off | On | On | On | lcoin = 2 credits | lcoin | = 6credits |
| On | On | On | On | Free Play (Demonstration Mode) |
“4 Manufacturer's recommended settings
Table 1-3 Switch Settings for Special Options
Settings of 4-Toggle Switch on Arabian Game PCB at location SW2 near RA14
| 1 | 2 | 3 | 4 | Options |
Off 2 Coin Counters
On 1 Coin Counter <4 Off Attract Mode Sound On No Attract Mode Sound <4
Off Off No Bonus
| on | Off | Bonus at 20,000 points |
| Off | On | Bonusat 40,000 points |
| On | On | Bonus at 20,000, 50,000, 100,000 and each |
100,000 points thereafter <4
<< Manufacturer's recommended settings
Arabian
FE. Game Play
Arabian isa “video book” witha happy ending! The attract mode introduces the story, and animated storybook “pages” let you experience the Arabian Prince’s adventures. Use the 8-position joystick to jump, super-jump, walk, crawl, or climb in all directions. Tap either KICK button (are you right- or left-handed?) to kick your enemies out of the way. There are 5 modes of operation in the game program — the attract mode, play mode, high-score mode, self-test mode, and demonstration mode.
Attract Mode Arabian has a colorful and entertaining attract mode. You can select either Music or Silence for this mode. (See Tables 12 and 1-3 foracomplete listing of operator-selectable options.) Four scenes cycle through the attract mode. The following message appears at the top of each of these scenes (the number under HI-SCORE will show the highest score earned on the game):
1-UP AI-SCORE 2-UP 000000 000000 000000 Scene 1 shows the ARABIAN logo, the message INSERT COINS , and the high-score table, The high-score table lists the 10 top scores. The number of credits appear at the bottom left side of the screen. A big blue Roc* flies across the screen, carrying a Princess with him. Thus the story begins—the Arabian Prince must try to rescue the Princess!
Scene 2 shows the Prince swinging across vines collecting lettered jugs. Then the Prince kicks a pair of Rocs and Oscars, while ARABIAN shimmers. Scene 3 shows a sample of game play. The castle playfield appears. SPELL ARABIAN’ FOR BONUS is on the top of the screen, and © 1983 ATARI, INC. isat the bottom of the screen. Brass jugs, each with a different letter in the word ARA-B-LAN, are scattered about the castle wall. Flying carpets sail across the screen in either direction, Purple Oscars and blue Rocs are misbehaving. The Prince jumps onto a flying carpet and captures (touch- €s) lettered jugs. Each letter he captures is replaced on the screen by a point value. He falls off a flying carpet and loses his life. Scene 4 continues game play. The playfield is a ship with 2 masts. Lettered jugs appear scattered about the rigging of the masts. The Prince kicks evil Genies, Oscars, and Rocs out of the way, and picks up the letters in order. When he reaches the top of the mast, BONUS flashes on the screen.
*ARoc isa “legendary bird of great size and strength believed to inhabit the Indian Ocean area'— Webster's New Collegiate Dictionary Set-Up Procedures
Play Mode The player controls a young Arabian Prince who must rescue his Princess from the castle tower where she is being held prisoner. Evil Genies in brass jugs, swooping Rocs, and purple ghostly creatures called Oscars will try to stop him along the way. The Prince scores points for kicking Oscars or Rocs, picking up lettered jugs, or spelling A-R-A- B-I-A-N. The Prince loses a life when he’s hit by a smokeball, falls off a ledge, flying carpet or vine, or gets caught (touched) by a Genie, Oscar, or Roc, The Prince must successfully complete four levels to rescue the Princess. (Four levels or “pages” equals 1 section.) Each level is introduced with the turning of a page, which shows a distant view of the upcoming playfield. Each playfield has 7 lettered jugs that must be picked up before the player can advance to the next level, but he must avoid or KICK evil Genies, Oscars, and Rocs that will try to stop him. Page 1. Page 1 turns, revealing a ship. The Prince must work his way to the crow’s nest at the top of the mast before the vessel reaches the shore. As he climbs up the rigging, Rocs and Oscars dive at him in an attempt to knock him down. The Prince must KICK them out of the way to survive. While contending with these rascals, he must also try to collect ali the jugs with letters on them. Beware! The jugs hold devilish Genies which can appear at any time and throw smokeballs at the Prince. Once a Genie has materialized, the Prince's kicking power cannot be used against him and he is unable to collect the jug so he should avoid the Genie, However, the Prince may collect the jug while the Genie is in smoke. When the Arabian has collected all the jugs and reaches the top of the ship, Page 2 introduces the second level of the story.
Set-Up Procedures
Page 2. Now the Arabian has arrived on shore. To reach the Princess he must complete a cave maze under the cliff. Low-hanging rocks and climbing vines force him to crawl and climb. The Prince must still dodge Rocs, Oscars, and the Genie’s smokeballs. And he must still collect the brass jugs. When he reaches the top of the cave, he must try to collect the letter “N” jug. Page 3. Now the Arabian Prince must scale the walls of the castle. As flying carpets whiz by, the Arabian must jump from one to the next, taking care he isn’t knocked off his present perch by another carpet flying too closely. He can duck to avoid them, but his timing has to be precise or he will take a tumble down to the ground. He must still dodge Rocs, Oscars, and the Genie’s smokeballs. The player must beware—sometimes a pair will merge into one super Roc bird or super Oscar! Page 4. The Prince has at last entered the castle. The Princess beckons him from high in the tower To reach her, he must ride atop some flying carpets and pull himself up ropes—all the while collecting the brass jugs and kicking meddlesome Rocs and Oscars, When he reaches his loving and grateful Princess, the two fly happily into the sunset on a magic carpet. Once the player has taken the Arabian through a section {all four levels), the next section begins. But the action gets faster, the Genies are angrier and fling more smokeballs, and there are more intelligent and challenging Rocs and Oscars. Even the brass jugs are rearranged so that it be-
in order.
Hints for Game Play @ The player can still complete a level even if he collects the jugs out of sequence. But if he collects jugs in sequence to spell A-RA-B-LA-N, he'll score many more bonus points (2000 + 2000 x section number). Arabian
@ Kicking a Roc or Oscar into other Rocs or Oscars awards higher points. @ Kicking a Super-Oscar or Super-Roc scores 1000 points. @ When a Genie begins to appear, the player should move to an area which allows him to avoid the smokeballs the Genie will throw!
High-Score Mode Table 1-4 lists the point values in the Arabian game.
Table 1-4 Arabian Scoring Table
Action Point Value
Collect letter jar 500 Spell A-R-A-B-I-A-N in order 2000+ 2000 xsection number Kick 1 Oscar or Roc with 1 kick 100 Kick 2 Oscars or Rocs with 1 kick 500+100 Kick 3 Oscars or Rocs with 1 kick 1000 + 500+100 Kick 4 Oscars or Rocs with 1 kick 2000 +1000 +500 +100 Kick Super-Roc or Super-Oscar 1000
‘When a player has earned one of the ten highest scores on the game, the alphabet will appear on the screen. He must use the joystick to advance a jug to the letter he wants to select, and use either KICK button to select that initial. His initials and score will be transferred to the High-Score Table. If the game is turned off, all high scores are erased.
Demonstration Mode The demonstration mode allows an operator to demonstrate all levels of game play. To enter the demonstration mode, set the game to free play. (Refer to Table 1-2 for the option switch settings.) Press the 1-Player start switch to begin the play mode. If you press the 1- and 2-Player start switches simultaneously for just an instant, the game will advance to the end of the level you are on, the Arabian Prince will jump up and down as if the level was successfully completed, and the game will automatically start the next level of play. In the demonstration mode, you may play the game at any time.
Self-Test Mode The self-test is a diagnostic program that wil! automatically check the game computer functions. You can also check the controls when the game is in self-test. Option-switch settings are displayed on the master self-test screen. Refer to Chapter 2 for complete self-test instructions (no equipment is needed).
Self-Test Procedures
‘This game will test itself and provide data to show that the game circuitry and controls are operating properly. Selftest data is presented visually on the video display and audibly through the speakers. No additional equipment is required. We suggest you perform a self-test when you first set up, each time you collect money, change the game options, or suspect game failure.
Chapter 2
Self-Test Procedures
A. Master Self-Test Display
To enter the self-test mode, set the self-test switch on the utility panel to the on position (see Figure 1-3 for the location of this switch). The game will first test the randomaccess memory (RAM)and read-only memory (ROM), and then display the rest of the master self-test display, which includes the current status of the option switches. The entire master self-test display is shown in Figure 2-1. You will be returning the game to this screen between phases of the self-test procedure. Arabian
When the game RAM and ROM are tested, a message appears in the upper right corner of the display to give you the status of RAM and ROM. If the RAM and ROM are operating properly, the self-test display will show RAM OK and ROM OK.
RAM failure may cause an ERROR RAM message. Check the address lines at 1C10. ROM failure is indicated on the screen by the words ERROR ROM followed by anumber which indicates the failed ROM. Table 2-1 lists these screen messages and the corresponding ROM numbers. Not all ROM failures may be diagnosed in the master self-test display.
Cocktail Only Player-2 Joystick Control
Me
Game Cocktail Only Memory Message
Pricing/Credits Player-2 KICK
pip Game Difficulty Switch swt Disptay Position Coin Counter DIP Switch Sounds Cabinet Type RAM OK ‘sw? ROM oK Bonus
Number of Boys
Option Switches and Settings
AU" © Auxiliary Coin Switch. ———— ena _ st 7 Right Coin Switch Service Switch 7 On Game PCB z
1-Player Start Switch
2-Player Start Switch
Left Coin Switch
Joystick Control Upright Game Player-1 Joystick Control Cocktail Game Left or Right KICK Upright Game Player-1 KICK Cocktail Game
Figure 2-1 Master Self-Test Display
Arabian
Table 2-1 ROM Locations Screen Message ROM Number
ERROR ROM 1 Icl
ERROR ROM 2 Ic2
ERROR ROM3 Ic3 ERROR ROM 4 1c4
Option-switch status is shown in the center of the master self-test display (see Figure 2-1). As shown in this example, option-switch status would appear as:
DIP 12345678 01100000 1234 1117
The status of each of the eight toggle switches of dual-inline-package (DIP) switch SW1 is shown in the center, and the status of each of the four toggle switches of DIP switch SW2 is shown to the right. 0 indicates the switch is off; 7 indicates the switch is on. Option switch SW1 is located near RA12 on the game PCB; option switch SW2 is located near RA14 on the game PCB. Refer to Tables 1-2 and 1-3 for their possible settings.
B. Game Controls Test
You can test the following game controls and switches while the master self-test screen is displayed: the auxiliary coin switch on the utility panel, service switch on the game PCB, 1-Player start switch, 2-Player start switch, right coin switch, left coin switch, left KICK button, right KICK button, and the joystick control, Refer to Figure 2-1 for the location of the 0 that corresponds to the control or switch you will be testing. To test a switch or control, activate it. The corresponding Oshould change to / as each switch is activated. if the test fails, troubleshoot using the information in Chapters 3 and 4, and the Schematic Package Supplement.
C. Sound Test
The sound test checks the Custom Audio sound chip. To start the sound test, simultaneously press the 1-Player and 2-Player start switches. Game sounds are produced and advance automatically from SOUND 1 through SOUND 9 and SOUND A through SOUND H. This test is displayed in. the lower right corner of the screen (see Figure 2-2), Each sound is explained in Table 2-2.
RAM OK ROM OK
Figure 2-2 Sound Test Display
Table 2-2 Sound Test Index Action Sound Number
Jump Kick Crawl Fatal Fall Genie with Throw Super Oscar/Roc Start Oscar/Roc Getting Kicked Birth of Oscar Player Death Complete Page Introduction Bonus Life Pick Up Jug Wave 1 Music Wave 2 Music Page Introduction Attract Mode Music Complete Wave TOMI ABE O DYAM BONe
Self-Test Procedures
D. Convergence Display
Simultaneously press the 1-Player start switch and either KICK button. The convergence pattern shown in Figure 2-3 should appear. If the convergence is correct the following occurs: @ the grid pattern should be pale pink @ the square sizes should be the same ®@ the red outline around the grid pattern should be visible within the bezel, because game play occurs within this boundary @ the dots should be displayed in the center of each square ©@ red and pale pink should be the only colors on the screen. Ifany of the above conditions do not exist, refer to the raster-scan video display manual for a detailed procedure on how to adjust display convergence. Simultaneously press the 1-Player start switch and either KICK button to end this test and return to the master selftest display.
Figure 2-3 Convergence Pattern Display
2-4 Arabian
E. Color Test and Character
Display
Simultaneously press the 2-Player start switch and either KICK button. The color-bar pattern shown in Figure 2-4 will appear.
Figure 2-4 Color-Bar Display
Twenty-eight bats of color—7 across by 4 down—are shown on the screen. If the display color is correctly adjusted, the colors should match those listed in Table 2-3. Ifany colors on your screen do not match those listed in Table 2-3, refer to the raster-scan video display manual for a detailed procedure on how to adjust the color.
Table 2-3 Color-Bar Display Colors Row Column Celor
DORR RR RR WO UWOOE WOH NWNNNNN Hose ee MAU RWNE YVAN KONE TAUERWNE WAURON AS Yellow-green Lilac Light blue-violet Sky blue Red-orange Light green Royal blue Orange Bright pink Light pink Blue Red-orange Green Dark royal blue Dark amber Olive green Yellow-green Light green Dark red-orange Forest green Green Light red-orange Orange Yellow-green Dark yellow-green Red-orange Brown Olive green
The next section of this test is the character display. Press the KICK button repeatedly to cycle through all playfield pictures described in Table 2-4.
Table 2-4 Character Display List
Segment Screen Display
Playfield 1 Ship Playfield 2 Cave Maze Playfield 3 Castle Wall Playfield 4 Castle Dungeon 1st Book Page Ship Near Shore 2nd Book Page Shore 3rd Book Page Castle Wall 4th Book Page Castle and Tower Animation Between Sections Character Display Castle and ‘Tower Closeup
17 Characters and Arabian Logo
Press KICK again, and the master self-test display will appear. Toend the self-test mode, set the self-test switch to off. The attract mode will automatically start. Self-Test Procedures
2-5
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Troubleshooting
Procedures
This chapter contains a discussion of troubleshooting aids and techniques to assist the service technician when a problem is suspected in this game. Most problems can be located quickly by following the information in this chapter. However, if problems persist, contact your nearest Atari Customer Service office listed on the inside cover of this manual for assistance. A thorough knowledge of game operation is desirable for effective troubleshooting. In addition to the operation and service information in the Schematic Package Supplement (SP-237) included with this manual, refer to The Book, A Guide to Electronic Game Operation and Servicing, available from Atari, Inc., for more information on coinoperated electronic games.
Chapter 3
‘Troubleshooting Procedures Arabian
To avoid electrical shock, turn the game off before removing or replacing components.
We recommend that troubleshooting and repair procedures be performed by a qualified electronic technician.
A. Troubleshooting Aids
Troubleshooting aids are provided throughout this manual and the Schematic Package Supplement. The following information is intended to acquaint the service technician with the portions of these documents that contain useful troubleshooting and repair information.
Assembly and Component Locations The illustrated parts lists in Chapter 5 illustrate the locations of assemblies and components. Printed-circuit board (PCB) illustrations aid in rapidly locating components contained on the corresponding schematic diagram(s).
Schematic Diagrams Complete schematic diagrams are provided in the Schematic Package Supplement. Component designations and their electrical values are included on the schematic diagrams. A block diagram of the major circuits on the game PCB (with sheet numbers to aid in locating the appropriate schematic diagrams) is included in the Schematic Package Supplement. A memory map is also included in the Schematic Package Supplement.
Signal Names A description of signal names used on the PCB schematic diagrams is provided in the Schematic Package Suppiement. Each signal description states where the signal is generated, its destination, and its purpose.
Troubleshooting Procedures Detailed troubleshooting procedures for locating defective components are provided in the Schematic Package Supplement. These procedures utilize the Atari CAT Box® to troubleshoot the game PCB. This game will test itself and provide data to aid in localizing troubles to amajorcircuit. Self-test procedures are provided in Chapter 2. Refer to the following section on Troubleshooting Techniques for a suggested troubleshooting sequence that uses the self-test procedures.
3-2
Arabian
B. Troubleshooting Techniques
The following troubleshooting steps are arranged ina sequence recommended for locating a defective component. The procedure begins with a check of the simple trouble possibilities and progresses to more extensive procedures for localizing the trouble to an assembly or major circuit, and then to a defective component.
- Check Switch Settings Incorrect switch settings can sometimes indicate a problem that does not exist. Refer to Chapter 1 Set-Up Procedures, to verify that the game has been installed properly and that the switches are set to their correct positions, Check for proper operation in all game-play modes.
- Check Fuses Check for open fuses. Refer to Figure 5-10 in Chapter 5 Illustrated Parts Lists, and the Color Raster Display Manual for the location and rating of each fuse used in this game. Make sure that replacement fuses are the proper type and. rating.
- Check Power-Supply Voltages Improper operation ofall circuits usually indicates a power supply problem. Check that the proper line voltage is available to the power supply.
- Localize Trouble Determine the trouble symptom. Use the wiring diagrams in the Schematic Package Supplement to determine which assemblies or major circuits could cause the trouble. Perform the self-test procedure provided in Chapter 2. ‘Troubleshooting Procedures
- Visual Check Visually check for obvious problems in the portion of the game where a problem is suspected. For example, check for loose or defective solder connections, integrated circuits loose in their sockets, loose cable connections, broken wires, damaged printed circuit boards or components.
- Check Voltages, Waveforms, and Signatures Check for correct voltages and waveforms. Perform the troubleshooting procedures provided in the Schematic Package Supplement.
- Check Individual Components
Check soldered-in components by disconnecting one end to isolate the measurement from the effects of the surrounding circuitry, Often, direct substitution is the most practical way to determine if a component is faulty. However, eliminate the possibility of some other circuit problem existing which could damage the substitute component.
- Repair the Assembly Repair or replace the defective part. Refer to Chapter 4 Maintenance and Repair, for special repair and replacement procedures. Check for proper operation of any repaired circuit.
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Maintenance and Repair
Procedures
The maintenance procedures provided in this chapter are for those items which are subject to the most severe use, ‘Toassure the maximum trouble-free operation from this game, Atari recommends that periodic routine maintenance be performed on the game components described in the following procedures, How often routine maintenance is performed depends upon the game environment and frequency of play.
Chapter 4
Maintenance and Repair Procedures
A. Cleaning Requirements
The game cabinet and display shield may be cleaned with any non-abrasive household cleaner. The coin mechanism should be cleaned periodically with hot or boiling water anda mild detergent. A toothbrush may be used to remove any stubborn build-up of residue in the coin path. After cleaning the coin mechanism, flush thoroughly with hot or boiling water and blow out all the water with compressed air, Compressed air is also recommended for cleaning dust from the interior of the cabinet. No lubricationis required for any of the moving parts in this game.
B. Opening the Control
Panel
The remaining procedures in this chapter are performed with the control panel open to provide access to the controls, Perform the following procedure to open the control panel:
- Unlock andopen the coin door. Reach up through the opening to the top of the contro! panel and release the two spring-draw latches.
- Close the coin door.
- Lift the control panelat the top edge and tilt it toward you. The control panel has foam tape on it. Make sure the tape is in good condition.
C. Joystick Leaf Switches
- Toreplace the joystick leaf switches, you do not need to disassemble the joystick. Using your thumbs, pry apart the plastic flanges on the switch holder. With your index finger, lift the switch up so thatit will clear the plastic tab located on the outside end of the switch holder.
- Slide the leaf switch out of its holder. Replace the switch in reverse order,
- Make sure that each leaf switch is firmly seated in its holder. There is a small gray plastic tab on the outside endof the switch holder. The black plastic part ofeach jeaf switch must be in front of this tab. 4, Check that all four leaf switches can be activated by watching the switch blades as you move the joystick handle up, down, left, and right. Arabian,
- Test the four diagonal positions. In each diagonal position, two leaf switches should close. Switches should continue bending slightly after making contact. 6, Adjust each switch contact for a narrow gap using the following procedure: a. Push the joystick handle away from the switch for easier servicing. b. Usea pair of needlenose pliers or a switch adjustment tool to bend each double set of blades in toward the center. Make the bend where the double set of blades protrude from the black plastic part of the switch.
- Recheck the switch action. The switches must move independently for right, left, up, down, and diagonal motion of the joystick.
D. Joystick Assembly
- Remove the entire joystick assembly from the control panel
- Remove the four screws in the plastic joystick frame. oe Remove the retaining ring from the bottom of the shaft. The assembly will now come apart. 4, Toreplace the bellows, pry it up and out ofthe plastic frame. Note that the inner raised ring on the bellows is longer on one side. This longer side goes on top of the assembly (toward the control knob).
- Reassemble the joystick in reverse order.
Arabian
E. Pushbutton Leaf Switches
1, Adjust the leaf switch contacts for a narrow gap. When. a pushbutton is depressed, the resulting wiping action of the cross bar contacts provides a self-cleaning feature. Don’t burnish the contacts. To clean them, use electrical contact cleaner.
- To replace a leaf switch, remove the screw with a Phillips-head screwdriver.
- Toreplace the switch pushbutton, turn the stamped nut witha wrench ina counterclockwise direction, as seen from the inside of the control panel. The ringon the outside of the control panel should not spin.
- Reinstall the pushbutton switch. Reconnect the harness wires to the switch terminals.
Joystick Leaf Switches
Top of Control Panel Blue/Black Left
White/Black Maintenance and Repair Procedures
E Start Switches
- Turn the switch counterclockwise while firmly holding the black cone-shaped bushing on the outside of the control panel.
- Install a new switch using the reverse procedure. Reconnect the harness wires as shown in Figure 4-1. Make certain the right colors go to the right tabs on the switch.
Start Switches
Start1
= Brown Normally Open
- Black Common
Violet/Black Start2 Down _ = Yellow Normally Open
- Black Common
Figure 4-1 Wire Connections to Joystick Leaf and Start Switches
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Illustrated Parts Lists
This chapter provides information you need to order parts for your game. Common hardware (screws, nuts, washers, etc.) has been deleted from most of the parts lists. However, there is a parts list for the hardware to mount the game PCB and Regulator/Audio II PCB to the cabinet. The PCB parts lists are arranged in alphabetical order by component. Each component subsection is arranged alphanumerically by reference designator. Other parts lists are arranged alphanumerically by Atari part number. In these parts lists, all A-prefix numbers come first. Following these are numbers in sequence evaluated. up to the hyphen, namely 00- through 99; then 0005980through approximately 201000: When ordering parts, please give the part number, part name, number of this manual, and serial number of your game. This will aid in filling your order rapidly and correctly. We hope the results will be less downtime and more profit from your game, Atari Customer Service numbers are listed on the inside front cover of this manual.
Arabian Mustrated Parts Lists
Manuals, Schematics, & Self-Test Label— See paris list on following page Fluorescent Tube & Speaker See Figure 5-4
040273-01 Display Shield A040266-01 Cabinet Assy. for 037332-01 Electrohome Display Video Display Ventilation Grille . igure 5-5 or 5+ A040266-02 036495-01 oe See Figure 5-5 or 5-6 Cabinet Assy. for Speaker Grille _ Atari Dispiay &-Position Joystick Se See Figure 5-3 - ye
178013-001 Latch oS e =e) 178034-024 TMolding =_! A038881-01 Lock
037419-02 Contro! Panel Deflection PCB : Access Panel See Figure 5-2 Used with Atari Display See Figures 55 & 511
EMi Cage See Figure 5-10
Game PCB EMI Shield PCB See Figure 5-12 See Figure 5-11
A040286-01 Main Harness Assy.
038870-01 Regulator! Ci Audio IT PCB cain Boor Assy. ; ‘in Box Enclosure sooPgure S33 ee Figures 5-8 or 5 Supply See Figure 5-14
Utility Panel Assy. See Figure 57 A037453-03 | 4 Power Cord 78-3201 Gide
A037470-01 Power On/Off ‘Switch Assy.
A040287-01 009992-01 On/Ott Switch Cover Lie Seti Power Harness Assy.
Figure 5-1 Cabinet Mounted Assemblies A040265-01 C
5-2
Arabian Illustrated Parts Lists
Cabinet-Mounted Assemblies Parts List
Part No. Description
A037453-03 Strain-Relief Power Cord (U.S. and Canada) A037470-01 Power On/Off Switch and Mounting Plate Assembly A038881-01 Lock Assembly (for rear access panel) Acceptable substitute is part no. A038881-03 A040266-01 Cabinet Assembly for Electrohome Display (includes glides and PCB retainers, but not the rear access panel) A040266-02 Cabinet Assembly for Atari Display (includes glides and PCB retainers, but not the rear access panel) 4040286-01 Main Harness Assembly A040287-01 Power Harness Assembly The following five items are technical information supplements to this game: SP-237 Arabian Schematic Package ST237-01 Arabian Label with Self‘fest Procedure and Option Switch Settings TM-220 Service Manual for 19-Inch Matsushita Cqlor-Raster Display (use with part no. 139003-1004) or TM-199 Service Manual for 19-Inch Atari Color-Raster Display TM-237 Arabian Operators Manual with Illustrated Parts List
78-3201 Adjustable Glide 009992-01 Power On/Off Switch Cover 036495-01 Speaker Grille 037332-01 Ventilation Grille 037419-02 Rear Access Panel (does not include lock) 038091-01 Molded Coin Box 038870-01 Coin Box Enclosure 040273-01 Video Display Shield with Graphics 178013-001 Spring Draw Latch 178034-024 %4-Inch Black Plastic FMolding. 178048-001 2-Inch Rigid Caster
5-3
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Arabian Iustrated Parts Lists
A040271-01 Control Panel with Decal 171021-001 Players may receive an electrical 040274-04 8-Position Joystick Assy. shock ifthis controi panels not pro- Decal—Not Shown See Figure 5-3 perly grounded! After servicing any 038267-01 parts on the panel, make sure that Control Panel the grounding clip is secured to the 78-6900402 metal tab onthe inside of the control Tape panel 62-041 Start Switch
'036895-01 177010-240 Switch Bezel Locknut
178030-007 75-9910NO Yellow Pushbutton Nut 75-5116B Bolt
160013-001 ‘A038455-01 Leat Switch & Button Harness Holder
Figure 5-2 Control Panel Assembly A040270-01 A Parts List
Part No. Description
A038455-01 Conuol Panel Harness Assembly A040271-01 Control Panel with Decal 62-041 SPDT Momenury Pushbutton Start Switch 75-0108, #10 Flat Washer 75-5116B #10-24 Black Carriage Bolt 75-9910NO #% x 1 Stamped Nut 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, 4-Inch Wide x 4-Inch Thick (24 inches required) 036895-01 Black Molded Switch Bezel 040274-04 Control Panel Decal (not shown) 038267-01 Control Panel 160013-001 Leaf Switch and Button Holder (leaf switch only is part no. 160012-001) 171021001 8-Position Joystick Assembly 177610-240 #10-24 Hex Locknut 178030-007 Yellow Pushbutton Assembly 179125-001 Grounding Terminal (not shown)
5-5
Illustrated Parts Lists Arabian
99-080028. Shalt
99-080026 Black Plastic ‘Washet
99-080036 Top Plate
98-080029 Nylon Washer
99-080031 Bellows
99-080025 99-080032 Leat Switch ‘Steel Washer
99-080030 Spring
99-080037 ‘Switch Plate
99-080033 Guard Actuator
i 99-080038
82-AL616 3) Switch Actuator
Screw + 73-3003 Retaining Ring
Figure 5-3 8-Position Joystick Assembly 17102 1-001
5-6
Mlustrated Parts Lists Arabian
8-Position Joystick Assembly Parts List
Part No. Description
73-3003 Retaining Ring
82-AL616 #6 x Linch Cross-Recessed Pan-Head ‘Type BT Self-Tapping Steel Screw 99-080025 Leaf Switch 99-080026 24Inch Black Plastic Washer 99-080028 Metal Shaft 99-080029 Nylon Washer 99-080030 Spring 99-080031 Bellows
99-080032 Flat Steel Washer
99-080033 Plastic Guard/Actuator 99-080036 Top Plate 99-080037 Switch Mounting Plate
99-080038 Nylon Switch Actuator
Illustrated Parts Lists Arabian
148001-013 Speaker 70-304 Tube 99-11006 Tab
yf
179035-001 561816P Tube Holder ie Nut
A037457-01 Harness
142028-001 Transformer
99-11003 Starter A037540-01 so.tio0e Ground Wire Socket 179125-001 Grounding Clip
036498-01 Upper Retainer
040272-01 Attraction Panel with Graphics
78-6900404 Tape
003053-01 Lower Retainer
Figure 5-4 Fluorescent Tube and Speaker Assembly A039737-01 B
Arabian Mlustrated Parts Lists
Fluorescent Tube and Speaker Assembly Parts List
Part No. Description
A037457-01 ‘Tube and Speaker Harness Assembly A037540-01 Ground Wire with Ring Lug 70-304 18-Inch, 15Watt, Cool White Fluorescent Tube 78-6900404 Vinyl Foam Single-Coated Adhesive Tape, 4-Inch Wide x %4-Inch Thick (48 inches required) 79-561816P Spring-Connector Wire Nut for 16- to 18-Gauge Wires 99-11003 Fluorescent Tube Starter 99-11006 Fluorescent Tube Locking Tab (consists of two pieces) 99-11009 Starter Socket 003053-01 Lower Attraction Panel Retainer 036498-01 Upper Attraction Panel Retainer 037469-01 Steel Tube Bracket 038151-01 15-inch Jumper Wire 040272-01 Attraction Panel with Graphics 142028-001 60 Hz, 118 V, Ballast Transformer (used on A038I61-01 assembly) 148001-013 6 x 9-Inch Oval, 49, 6-Ounce, Shielded High-Fidelity Speaker 179035-001 2-Pin Fluorescent Tube Holder 179125-001 Grounding Clip (Acceptable substitute is part no. 179074-010)
5-9
Mlustrated Parts Lists
040273-01 037443-03 Shield w/ Graphics Bezel
177006-046 Nut A201092-01 Atari CRT Assy. 201018-01 Mounting Bracket
175002-003 Washer yo
cee =
A201024-01 Display Harness Assy.
Figure 5-5 Atari Video Display Assembly A039650-01 A Parts List Arabian
72-5912 Screw
A201020-01 Neck PCB Assy.
Part No. Description
A200001-01* A201092-01* A201022-01* CRT Assembly Deflection PCB Assembly (not shown) 19-Inch Atari Color Raster-Scan Cathode-Ray Tube (CRT) Assembly—includes:
A201024-01 Color Raster Harness Assembly A201020-01* Neck PCB Assembly
72-5912 4fe-18 x %-Inch Hex-Head Screw 034536-01 Foam Pad (between Deflection PCB and cabinet wall—not shown) 037443-03 Display Bezel 040273-01 Display Shield with Graphics
175002-003, 1-Inch Flat Washer 177006-046 Yo-18 Caged Nut 202018-01 Mounting Bracket
*See the Atari 19-Inch Color Raster Display Manual (TM-199) for complete parts information
5-10
Arabian
Shock Hazard Display repair should only be performed by a qualified service technician. Before removing or repairing the video display, unplug the game. High voltages may exist in any video display, even with power disconnected. Use extreme
tarily touch the free end ofthe grounded jumper tothe anode by sliding it under the anode cap. Wait two minutes and discharge the anode again.
Implosion Hazard {f you drop the display and the picture tube breaks, it may implode! Shattered glass can fly six feet or more from the implosion, Use care when replacing any display. Illustrated Parts Lists
92-049 Electrohome Display or 13903-1004 Maisushita Display 040273-01 037443-03 Shield w/ Graphics Bezel
Figure 5-6 Electrohome Video Display Parts List
Part No. Description
78-6900402 Vinyl Foam Single-Coated Adhesive Tape, 4-Inch Wide x %-Inch Thick (24 inches requiced between the display shield and the control panel, not shown) 92-049 19-Inch Electrohome Color Raster-Scan Display (Acceptable substitute is part no. 139003-1004—19-Inch Matshushita Color Raster-Sean Display) 03 7443-03 Display Bezel 040273-01 Display Shield with Graphics
5-11
Mlustrated Parts Lists Arabian
179125-001 Grounding Clip
75-9910WO Nut
A002465-01 Coin Counter 62.041 Auxiliary Coin Switch
176018-002 Screw
69-001 Self-Test Switch 178070-001 Volume Control Knob
038003-01 Panel Before removing or repairing the 19-9032 utility panel, tum the game off. Players may receive an electrical shock if the utility panel is not prop- Volume Control
erly grounded! After servicing any parts on the panel, make sure thal the ground wire is firmly attached to the metal screw on the back of the coin counter.
Only the Ireland-built cabinet has two coin counters.
Figure 5-7 Utility Panel Assembly A038002-01 H Parts List
Part No. Description
A002465-01 6 V Coin Counter A038004-01 Utility Panel Harness 19-9032 Volume Control 62-041 SPDT Momentary-Contact Pushbutton Auxiliary Coin Switch with Black Cap 69-001 DPDT Self-Test Switch 038003-01 Utility Panel 176018-002 #6-32 x %-Inch Machine Screw 178070-001 Volume Control Knob 75-9910WO '¥,,-32 Stamped Nut i791 25-001 Grounding Clip
5-12
Illustrated Parts Lists Arabian
1700-001 Lamp y 179047-001 — “ 99-15023 Lamp Base @E Base Plate
99-15056 Screw for Bezel 99-1026 (Coin Iniet)
99-15025 Coin Inlet
99-15055 Retaining Screw oa -~ 9915054 L Pivot for Lever S\N _ SNS
9.15027 a Side Plate ~~ Con Return — NN . ™ AE. 7 = e Sh 4 759148 | Le 99-1028 ¥ Coin Return Box Hi lex Nut 75.056 “be N Lock Wash oN oN
99-15075 Sw. Adjuster
99-15029 Bracket
99-15042 Switch
T21414S Screw
Figure 5-8 Vertically Mounted Coin Door 171034-xxx A
5-13
Arabian Illustrated Parts Lists
99-15067. Lock Assy. 99-15038 Bezel for Button
Screw 99-15001 thru 99-15011 Return Button A037542-01 Harness—not shown
Lock Assy, 99-15063 Screw
99-15072 Door Frame
99-15070 Doors and Frame 99-15073 Upper Door
99-15074 Lower Door
German 1 DM/5 DM Coin Door 171034-015 — French 2 Fii1 Fr Coin Door 171034011 — 171034-006 — U.K. 20 P/50 P Coin Door 171034-009 — German 2 DM/1 DM Coin Door 171034-010 — German 2 DM/5 DM Coin Door 171034-001 — U.S. 25¢/25¢ Coin Door 171034003 — Canadian 25¢/25¢ Coin Door 171034-005 — U.K. 10 P/50 P Coin Door
ertically Mounted Coin Door, continued Ve “8 Figure 5 171034-xxx A
5-14
Illustrated Parts Lists Arabian
Vertically Mounted Coin Door Parts List
Part No. Description A037542-01 Harness Assembly 72-1414 #4-40 x %-Inch Cross-Recessed Pan-Head Steel Machine Screw 75-056, #6 Internal-Tooth Zinc-Plated Steel Lock Washer 75-9148 #4-40 Steel Machine Hex Nut
75-34148 #4-40 x %-Inch 82° Cross-Recessed Flat-Head Steel Machine Screw 99-15001 Coin Return Button with U.S. 25¢ Price Plate 99-15002 Coin Return Button with U.S. $1 Price Plate 99-15003 Coin Return Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005 Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Belgian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008. Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Plate 99-15610 Coin Return Button with Australian 20¢ Price Plate 99-15011 Coin Return Button with Italian 100 Lire Price Plate 99-15023 Base Plate 99-15625 Left Half of Coin Iniet 99-15026 Right Half of Coin Inlet 99-15027 Side Plate of Coin Return Box 99-15028 Base Plate of Coin Return Box 99-15029 Switch Bracket 99-15036, Metal Coin Return Cover 99-15038 Bezel for Coin Return Button
99-15039 Metal Bezel for Coin Return Cover 99-15040 Coin Return Lever 99-15042 Coin Switch for U.S. 25¢ 99-15052 Spring for Coin Return Button
99-15054 Pivot for Coin Return Lever 99-15055 Retaining Screw 99-15056 #4-40 x %h¢-Inch Cross-Recessed Pan-Head Steel Machine Screw 99-15060 Switch Cover 99-15063 Screw for Hinge 99-15066 Screw for Clamp 99-15067 Lock Assembly 99-15070. Doors and Frame 99-15071 Clamp for Frame 99-15072 Door Frame 99-15073, Upper Door 99-15074 Lower Door 99-15075 Switch Adjuster 038091-01 Coin Box (Not included in assembly—Acceptable substitute is part number A037491-01) 170000-G01 6.3 V Miniature Wedge-Base Incandescent Lamp 171006-035 Meta! Coin Mechanism 179047-001 Lamp Base
Illustrated Parts Lists Arabian
171006-035 99-10140 Coin mechanism. Panel assy.
75-9488 a SO Locknut 99-10116
99-10152
99-10096 Fastener
99-10151 Left coin inet
98-10080
99-10104
99-10154
~ ~ 3 QS Ni
; Fr 99-10042 thru 99-1045 . ; . Coin switch assy
Coin return box ~ SS ‘ cl : 65-4416 > ,, ‘| _ erm” al, Sg A
NS Coin switch Be 99-10150 < Switch cover
99-10075 thru $9-10078 Switch wire 99-10008 75-1412S, Retainer Screw
Figure 5-9 American-Made Coin-Door Assembly 171027-001 A
5-16
Arabian Illustrated Parts Lists
T2RHAI&OSC ses tvias Screw ev10%42 Button housing
99-10139 Coin door ——>| 99-10134 setorta | Over Button assy.) 99.10118
Spring
{)
99-10141
99-10145 S Coin return cover
Cam S\N
S 99-10117 Coin return door
99-10144 —e— Channel clip
- ~
72.JA1405B Screw
9.10149 Service door
038091.01 Coin box 99-10143 Frame
Figure 5-9 American-Made Coin-Door Assembly, continued 171027-001 A
Illustrated Parts Lists Arabian
American-Made Coin-Door Assembly Parts List
Part No. Description
171006-035 Metal Coin Mechanism for U.S. $.25 65-441C Coin Switch 70-11-47 Miniature Bayonet Lamp 72-9406S #4-40 x ¥%-Inch Truss-Head Screw
72-HA1404C #4-40 x %4-Inch Pan-Head Screw 72-JA1405B #4-40 x .31-Inch Pan-Head Screw 75-14128 #4-40 x %4-Inch Pan-Head Screw 75-9448 #4-40 Locknut
99-10008 Retainer 99-10042 Coin Switch Assembly for Belgian 5 Fr and U.S. $.25 99-10043 Coin Switch Assembly for German 1 DM, Japanese 100 Yen, Swiss 1 Fr 99-10044 Coin Switch Assembly for German 2 DM, Italian 100 L, U.S. $1.00
99-10045 Coin Switch Assembly for Australian $.20, German 5 DM, British 10 P 99-10068 Coin Return Chute 99-10075 Switch wire (included in coin switch assembly)
99-10076 Switch wire (included in coin switch assembly) 99-10077 Switch wire (included in coin switch assembly)
99-10078 Switch wire (included in coin switch assembly) 99-10080, Lamp socket 99-10081 Key holder
99-10096 Fastener 99-10104 Bar retainer 99-10105 Bar 99-10115 Spring
99-10116 Plastic Coin Return Lever 99-10117 Steel Coin Return Door 99-10118 Amber Coin Return Button 99-10119 Amber Coin Button for U.S, $.25. 99-10134 Coin Button Cover 99-10139 Coin Door 99-10140 Coin Door Inner-Panel Assembly 99-10141 Diecast Coin Return Cover
99-10142 Diecast Button Housing 99-10143 Coin Door Frame 99-10144 Coin Door Channel Clip 99-10145 Offset Cam
99-10146 Coin Inlet Chute Assembly 99-10147 American-Made Coin Door Harness 99-10148 Lock Assembly 99-10149 Service Door 99-10150 Switch Cover 99-10151 Left Coin Inlet 99-10152 Right Coin Inlet 99-10153, Coin Return Box 99-10154 Bracket Assembly
5-18
Arabian Illustrated Parts Lists
A021084-xx Voltage Plugs
29.053 Capacitor 03454401 Fuse Block Cover
79-4411001 Fuse Post 78-70501SC 1 Capacitor Bracket —~. 46-2017002 Fuse
A035891-02 03448: Fuse Harness cress Assembly \\ 46-301203
79-3206 Fuse Biock Filter Assembly
46-2014002 Fuses,
79-18021001 A035890-01 Terminal Block Power Harness
A034629-01 SAMDA35O1 AC Harness Rectifier
Figure 5-10 Power Supply Assembly A037671-01 H
Illustrated Parts Lists Arabian
Power Supply Assembly Parts List
| Designator | Description | Part No. | |
| a | 27,000 #F, 15 VDC Electrolytic Capacitor | 29-053 | |
| cl | 24Inch Diameter Capacitor Mounting Bracket | 78-70501SC | |
| CRI | ‘Type-MDA 3501 Bridge Rectifier | 3A-MDA3501 | |
| Fl | Panel-Mounting Non-Indicating 3AG Cartridge-Type Fuse Post | 794411001 | |
| Fi | 7 A, 250 V, 3AG Slow-Blow Glass Cartridge-Type Fuse | 46-2017002 | |
| Fl | Label for Fuse Value | 937639-01 | |
| F2 | 4 A, 250 V, 3AG Slow-Blow Glass Cartridge‘Type Fuse | 46-2014002 | |
| F2-F6 | 5-Position 3AG Fuse Block with %-Inch Quick-Disconnect Terminals | 79-3206 | |
| F2-F6 | Fuse Harness Assembly | A035891-02 | |
| F2-F6 | Fuse Block Cover | 034544-01 | |
| F2-F6 | Label for Fuse Values | 037641-01 | |
| F3 | 20 A, 32 V, 3AG Slow-Blow Glass Cartridge‘Type Fuse | 46-301203 | |
| F4 | 2-Circuit Single-Row Terminal Block | (located under F4) | 79-15021001 |
| F4-F6, | 4 A, 250 V, 3AG Slow-Blow Glass Cartridge-Type Fuse | 46-2014002 | |
| FLI | RFI Filter Assembly | (designation not marked) | A034630-01 |
| ay | Power Harness Assembly | A035890-01 | |
| B | Voltage Plug for 120 V (105-135 VAC) | (yellow wire color—plugs into J3) | A021084-02 |
| J4a | AC Harness Assembly | A034629-01 |
Tl Transformer Assembly (designation covered) (Acceptable substitute is part no. A035888-02) A035888-01 Nylon Type 6/6 Hole Bushing with %-Inch Inside Diameter x *%4-Inch Outside Diameter x ‘-Inch Thick 78-2708
Power Supply Chassis Base 03448202 Metal Base Plate (not shown in illustration) 037243-01
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Ulustrated Parts Lists.
037873-01 Spacer
Game PCB
72-1604F Screw
175004-708
A035435-02 Regulator/Audio Il PCB See Figure 514 Arabian
176015-112 Screw
471051-001 Arabian Game PCB See Figure 5-13
‘A037701-02 EM! Cage
ee 175009-221 Washer A037430-05 EMI Shield PCB 178044-242 EM! Shield PCB See Figure 542 Grommet
178045-442 Grounding clip not shown Fastener
176015-112 175004-708
176015-112 Screw
A201022-01 Deflection PCB—used only with the Atari Video Display
Figure 5-11 Electromagnetic interference (EMI) Cage Assemblies
5-22 and PCB Mounting Hardware
Arabian Mlustrated Paris Lists
EMI Cage Assemblies and PCB Mounting Hardware Parts List
Part No. Description
A201022-01 Deflection PCB—used only with the Auri Video Display A035435-02 Regulator/Audio II PCB (Acceptable substitute is part no. A035435-06) A037701-02 EMI Cage (includes guide) A037430-05 EMI Shield PCB— includes: 72-1404F #4-40 x %4-Inch Cross-Recessed Steel Screw 037873-01 Spacer 175009-221 Plastic Washer 178044-242 Grommet 178045-442 Snap-In Fastener 724604F #6,32 x %-Inch Cross-Recessed Pan-Head Steel Screw 171051-001 Arabian Game PCB 175004-708 #8 Flat Fiber Washer 176015-112 #10 x %-Inch Cross-Recessed Pan-Head Screw
Illustrated Parts Lists
5-24 r
mcd nN
oo} GC! 3 ¢2 c22 43 c23 ot} -C4 ce4 a0 acs
| c25 | 4a | cé |
C26 a+ ac
| ce? Ca} | ta | C8 |
cas a c3¢ at cl! C3! aor aT Cl2
C35 636 Co} tO Cl7 c37 AHL C8 38 Ca +H-Cl9
| <3? -GaD- | C2 | C26 |
c4OF |] Coc!
° cs340} cas c544i Eg} c42 55 {21+ AED C43 c56 i} ao C44 657 4 c45 or C56 LO Dest 046 cs T+ fess} C47 ceg i+ ema 648 cor Cot eS} C49 ce2zfo} ia} C56 cé63 +0- cs! srt || coese (vu Go NOTICE TO ALi. PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the specific vaitten permission of Atari, Inc... Sunnyvale, CA. This drawing is ‘only conditionally issued, ‘and ‘nelther receipt nor possession thereof confers or transters any right in, or license teuse, the subject matter of the drawing or any design or technical infor- ‘mation shown thereon, nor ahy right to reproduce this drawing ‘or any part thereo!. Except for manufacture by vendors of Atari, Inc., and for manufacture under the corporation's written license, no fight to reproduce this drawing is granted or the subject matter thereo! unless by written agreement with or written permission from the corporation,
Figure 5-12 EMI Shield PCB Assembly A037430-05 A Arabian,
Arabian, Mlustrated Parts Lists
Electromagnetic Interference Shield PCB Parts List
| Designator | Description | Part No. |
Capacitors
| C1-C4 | 0.1 pF, +80, -20%, 50 V Ceramic Capacitor | 122002-104 |
| C5-C8 | 0.01 pF, +80, -20%, 25 V Minimum Ceramic Axial-Lead Capacitor | 122005-103 |
| Ci, C12 | 0.01 zF, +80, -20%, 25 V Minimum Ceramic Axial-Lead Capacitor | 122005-103 |
| C7 | 0.1 AE, +80, -20%, 50 V Ceramic Capacitor | 122002-104 |
| C18-C20 | 0.01 pF, +80, -20%, 25 V Minimum Ceramic Axial-Lead Capacitor | 122005-103 |
| C21-C23 | 0.1 pF, +80, -20%, 50 V Ceramic Capacitor | 122002-104 |
| C24-C27 | 0.01 nE, +80, -20%, 25 V Minimum Ceramic Axial-Lead Capacitor | 122005-103 |
| C29-C31 | 0.01 AF, +80, -20%, 25 V Minimum Ceramic Axial-Lead Capacitor | 122005-103 |
| C35 | 0.01 pF +80, -20%, 25 V Minimum Ceramic Axial-Lead Capacitor | 122005-103 |
| C36 | 0.1 pF, +80, -20%, 50 V Ceramic Capacitor | 122002-104 |
| C37-C39 | 0.01 wF, +80, -20%, 25 V Minimum Ceramic Axial-Lead Capacitor | 122005-103 |
| 40, C41 | 0.1 pE +80, -20%, 50 V Ceramic Capacitor | 122002-104 |
C42-C44 470 pF, 100 V, Ceramic Axial-Lead Capacitor Acceptable substitute is part no. 122013-471 122016-471
| C45 | 0.1 pF, +80, -20%, 50 V Ceramic Capacitor | 122002-104 |
C46-C50 1000 pE +5%, 100 V Ceramic Axial-Lead Capacitor Acceptable substitute is part no. 122002-102 122016-102
| CS1-C64 | 0.1 uF, +80, -20%, 50 V Ceramic Capacitor | 122002-104 |
Connectors
| PIS | 24-Pin Connector | 179073-024 |
| P20 | 44-Pin Connector Acceptable substutute is part no. 179046-044 | 179073-044 |
Miscellaneous
Spacer 037873-01 #4-40 x %-Inch Cross-Recessed Steel Screw 72-1404F Plastic Washer 175009-221 Grommet 178044-242 Snap-In Fastener 178045-442
5-25
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Arabian
4, + 58be a 1e194 Illustrated Parts Lists
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the specific, ‘written permission of Atari, Inc., Sunnyvale, CA. This drawing is ‘only conditionally Issued, and neither rece’pt nor possession thereof confers or transfers any right in, oF license to use, the subject matter of the drawing or any design or technical intormation shown thereon, nor any right to reproduce this drawing for any part thereof. Except for manufacture by vendors of ‘ari, Ine., and for manufacture under the corporation's written license, no right to reproduce this drawing 's granted or the subject matter thereof unless by written agreement with or wiltten permission from the corperation.
Figure 5-13 Arabian Game PCB Assembly, continued
5-27
Illustrated Parts Lists
Game PCB Assembly Parts List Arabian
| Designator | Description | Part No. |
Capacitors
| cl | 470 pF, +20%, 16-V Minimum, Radial-Lead Aluminum Electrolytic Capacitor | 123004-471 |
| C2 | TF, 25 V, Tantalum Electrolytic Capacitor | 99-2.00008 |
| C3 | 0.1 pE, 50 V, Polyester Film Capacitor | 21-101104 |
| C4 | 47 yF, 16 V, Aluminum Electrolytic Capacitor | 123004-470 |
| cS | 22 pE, 16 V, Electrolytic Capacitor | 123004-220 |
| co | 470 pF, +20%, 16V Minimum, Radial-Lead Aluminum Electrolytic Capacitor | 123004-471 |
| c7 | 10 pF, 16 V, Electrolytic Capacitor | 123004-100 |
| ce | 47 pF, 16 V, Aluminum Electrolytic Capacitor | 123004-470 |
| co | 33 pF Ceramic Capacitor | 99-200009 |
| cio | 47 pF Ceramic Capacitor | 99-200013 |
| cil, cI2 | 100 pF, +20%, IGV Minimum, Radial-Lead Aluminum Electrolytic Capacitor | 123004-101 |
| C13-C15 | 47 pF Ceramic Capacitor | 99-200010 |
Coils
| CLI-CL3 | 1 pH Coil (SP0406/RO) | 99-200012 |
Crystal
| X1 | 12.000-MHz Crystal | 99-200015 |
Diodes
| DI | Type 181588 Diode | 99-200004 |
Integrated Circuits
| ICl-IC4 | ‘Type 2764 RAM | 99-200005 |
| Ic9 | ‘Tri-State Octal Bus Transceiver Integrated Circuit | 37-TALS245, |
| Iclo | 156 ns Tri-State Static RAM Integrated Circuit | 137211-001 |
| ICl-IC14 | Hex Bus Driver Integrated Circuit | 137168-001 |
| 1c15 | Z-80A 4-MHz Game Microprocessor | 99-260014 |
| ICl6 | Tri-State Hex Bus Driver Integrated Circuit | 37-74LS367 |
| 1C17, IC18 | 4 to 10 Decoder Integrated Circuit | 37-TALS42 |
| Icl9 | ‘Tri-State Hex Bus Driver Integrated Circuit | 37-TALS367 |
| 1C20 | Quad 2-Input OR Gate Integrated Circuit | 37-7ALS32 |
| 1€21, 1C22 | ‘Tri-State Hex Bus Driver Integrated Circuit | 37-TALS367 |
| 1C23-1C25 | Quad Data Selector/Multiplexer Integrated Circuit | 37-74LS157 |
| 1C26 | MB8841-1057 | 99-200007 |
| 1C27 | Programmable Sound Generator Integrated Circuit | 137222-001 |
| 1C28 | ‘Tri-State Octal Bus Transceiver Integrated Circuit | 37-TALS245, |
| 1C29 | Quad 2-Input NAND Gate Integrated Circuit | 37-74LS00 |
| 1C30 | Quad 2-Input OR Gate Integrated Circuit | 37-74L832 |
| 1C31 | 3 to 8 Decoder/Multiplexer Integrated Circuit | 377418138 |
| 1C32 | Quad Data Selector/Multiplexer Integrated Circuit | 137221-001 |
| 1033 | Hex Inverter Integrated Circuit | 37-74LS04 |
| 1034 | 4-Bit Synchronous Counter Integrated Circuit | 37-74LS163 |
5-28 (continued on next page)
Illustrated Parts Lists Arabian
Game PCB Assembly Parts List, continued
| Designator | Description | Part No. |
| 135, | Quad 2-Input AND Gate Integrated Circuit | 37-74LS08 |
| iC36 | ‘Tri-State Hex Bus Driver Integrated Circuit | 37-74LS367 |
| 1C37 | Quad D-Type Flip-Flop Integrated Circuit | 37-7ALSI75, |
| 1C38 | ‘Tri-State Hex Bus Driver Integrated Circuit | 37-74LS367 |
| 139, 1C40 | Dual D-lype Flip-Flop Integrated Circuit | 37-74LS7A |
| IC41 | Hex Bus Driver Integrated Circuit | 137168-001 |
| 1c42 | Audio Power Amplifier Integrated Circuit | 137223-001 |
| 1C43, | 4-Bit Synchronous Counter Integrated Circuit | 37-TALSIO3 |
| 1C44 | Quad D‘lype Flip-Flop Integrated Circuit | 37-7ALSIT5S |
| 1045 | Quad Data Selector/Multiplexer Integrated Circuit | 37-74L8157 |
| IC46, IC47 | 4-Bit Synchronous Counter Integrated Circuit | 37-7ALSIO3, |
| 1C48 | Quad Data Selector/Multiplexer Integrated Circuit | 37-TALSIS7 |
| Ic49 | 4-Bit Synchronous Counter Integrated Circuit | 37-7ALS163 |
| 1C50 | Quad D-lype Flip-Flop Integrated Circuit | 37-7ALSI75 |
| IC51 | 4-Bit Synchronous Counter Integrated Circuit | 37-74LS163 |
| 1€52, IC53 | Quad Data Selector/Multiplexer Integrated Circuit | 37-7ALSIS7 |
| 1054 | Quad 2-Input AND Gate Integrated Circuit | 37-74LS08 |
| 1C55 | Dual D-ype Flip-Flop integrated Circuit | 37-74LS74 |
| IC56 | Quad 2-Input OR Gate Integrated Circuit | 37-TALS32 |
| 1C57 | Hex Inverter Integrated Circuit | 37-7ALS04 |
| ICS8 | Quad 2-Input AND Gate Integrated Circuit | 37-74LS08 |
| 1C59 | Dual D-Type Flip-Flop Integrated Circuit | 377ALS7T4 |
| 1060 | Hex Inverter Integrated Circuit | 37-7ALS04 |
| IC61 | Hex Bus Driver Integrated Circuit | 137168-001 |
| 1062 | 4-Bit Synchronous Counter Integrated Circuit | 37-74LS163 |
| 1C63 | Quad D-Type Flip-Flop Integrated Circuit | 37-7ALSI75 |
| 1C64 | Quad Data Selector/Multiplexer Integrated Circuit | 37-74ES157 |
| IC65 | 4-Bit Synchronous Counter Integrated Circuit | 37-74LS163 |
1066 Quad D-Type Flip-Flop Integrated Circuit 37-7ALSITS
| IC67 | Quad Data Selector/Multiplexer Integrated Circuit | 37-74LS157 |
| 1C68 | 4-Bit Synchronous Counter Integrated Circuit | 37-7ALS163 |
| C69 | Quad DType Flip-Flop Integrated Circuit | 37-7ALSI75 |
| Ic70 | 4-Bit Synchronous Counter Integrated Circuit | 37-74LS163 |
| C71, IC72 | Quad Data Selector/Multiplexer Integrated Circuit | 37-74LS157 |
| 1C73, | Quad 2-Input NAND Gate Integrated Circuit | 37-74LS00 |
| IC74 | Dual DT ype Flip-Flop Integrated Circuit | 37-74LS74 |
| 1C75 | Hex laverter Integrated Circuit | 37-74L804 |
| 1C76 | Quad 2-Input NAND Gate Integrated Circuit | 37-74LS00 |
| IC77 | Hex Inverter Integrated Circuit | 37-74LS04 |
| 1C78, IC79 | Dual Dype Flip-Flop Integrated Circuit | 37-74LS74 |
| 1C80 | Quad DType Flip-Flop Integrated Circuit | 37-74LS175, |
| C81 | Dual J-K Flip-Flop Integrated Circuit | 137169-001 |
| 1C84-IC87 | Type 2764 RAM | 99-200005 |
| 1C90 | Quad D‘lype Flip-Flop Integrated Circuit | 37-7ALSI75, |
| ico | Dual Dlype Flip-Flop Integrated Circuit | 37-TALSTA |
| Ic92 | Quad 2-Input NAND Gate Integrated Circuit | 37-74LS00 |
| 1C93 | Quad 2-Input OR Gate Integrated Circuit | 37-7ALS32 |
| 1€95, IC96 | Dual 4-Bit Counter Integrated Circuit | 37-74LS393 |
(continued on next page)
5-29
Illustrated Parts Lists
Game PCB Assembly Parts List, continued Avabian
| Designator | Description | PartNo. |
| 1C94 | Dual 4-Input NAND Gate Integrated Circuit | 37-74LS20 |
| 1C97 | Quad 2-Input AND Gate Integrated Circuit | 37-7A1S08 |
| IC98 | Quad 2-Input OR Gate integrated Circuit | 37-74L832 |
| IC99 | Duai 4-Input AND Gate Integrated Circuit | 137210-001 |
| 1¢100 | Quad 2-Input OR Gate Integrated Circuit | 37TALS32 |
| IC101 | Hex Inverter Integrated Circuit | 37-7ALS04 |
| IC102 | Quad 2-Input OR Gate Integrated Circuit | 37-74LS832 |
| 1C103 | Quad 2-Input NOR Gate Integrated Circuit | 37-7ALSO2 |
| 1C104-1C106 | Quad 2-Input NAND Gate Integrated Circuit | 37-74LS00 |
| 1cl07, | ‘Triple 3-Input NAND Gate Integrated Circuit | 37-74LS10 |
| 1Ci08 | Quad 2-Input NAND Gate Integrated Circuit | 37-74LS00 |
| Icl09 | Quad 2-Input NOR Gate Integrated Circuit | 37-74LS802 |
| Icno | Quad 2-Input OR Gate Integrated Circuit | 37-7ALS32 |
| cll | Hex Inverter Integrated Circuit | 37-7ALSO4 |
| 1CN2-IC115 | Quad 2-Input Exclusive-OR Gate Integrated Circuit | 37-74LS86, |
| ICh6 | Quad 2-Input NAND Gate Integrated Circuit | 37-7403 |
| ICi7 | Quad 2-Input Exclusive-OR Gate Integrated Circuit | 37-TALS86 |
| Ics | Triple 3-Input NAND Gate Integrated Circuit | 377415810 |
| Ich9 | Quad 2-Input NAND Gate Integrated Circuit | 37-74LS00 |
| IC120 | ‘Triple 3-Input NAND Gate Integrated Circuit | 37-741810 |
| IC121-IC126 | Quad 2-Input OR Gate Integrated Circuit | 37741832 |
| C127 | ‘Triple 3-Input NAND Gate Integrated Circuit | 37-74LS10 |
| IC128 | Quad 2-Input AND Gate Integrated Circuit | 37-74LS08 |
| Ic129 | Dual DType Flip-Flop Integrated Circuit | 37-74LS74 |
| IC130-1C133 | ‘Dual Data Selector/Multiplexer Integrated Circuit | 37-7A153, |
| IC134 | Quad Data Selector/Multiplexer Integrated Circuit | 37-74LS157 |
| 1C135 | 4-Bit Shift Register Integrated Circuit | 37-74LS95 |
| IC36 | Quad Data Selecior/Multiplexer Integrated Circuit | 37-741S157 |
| IC137 | 4-Bit Shift Register Integrated Circuit | 37-74LS9S, |
| ICB8 | Quad 2-Input OR Gate Integrated Circuit | 37-TALS32 |
| 1c140 | 4-Bit Shift Register Integrated Circuit | 37-TALSOS |
| 1C141 | Quad Data Selector/Multipiexer Integrated Circuit | 37-74LS157 |
| ICH2 | 4-Bit Shift Register Integrated Circuit | 37-TALSOS |
| 1143, 1C144 | Quad Data Selector/Multiplexer Integrated Circuit | 37-741S157 |
| ICH45 | 4-Bit Shift Register integrated Circuit | 37-74L895 |
| ICM46 | Quad Data Selector/Multiplexer Integrated Circuit | 37-74L8157 |
| 1C147 | 4-Bit Shift Register Integrated Circuit | 37-74L895 |
| ICI50, | 4-Bit Shift Register Integrated Circuit | 37-74L895 |
| IC151 | Quad Data Selector/Multiplexer Integrated Circuit | 37-7418157 |
| IC152 | 4-Bit Shift Register Integrated Circuit | 37-74L895 |
| 1C153 | Quad Data Selector/Multiplexer Integrated Circuit | 37-TALSIS7 |
| 1C154-1C185 | 375 ns Dynamic RAM Integrated Circuit | 100017-001 |
| 1C187 | Quad 2-Input OR Gate Integrated Circuit | 37741832 |
| IC188 | Hex Inverter Integrated Circuit | 37-7T4L804 |
| 1C189 | Duval 4-Input AND Gate Integrated Circuit | 137210-001 |
| {C190 | Hex Buffer/Driver Inverter Integrated Circuit | 37-7406 |
| 1C191 | Quad 2-Input NAND Gate Integrated Circuit | 37-74LS00 |
| 1c192 | Quad 2-Input AND Gate Integrated Circuit | 37-74L808 |
(continued on next page)
Arabian Illustrated Parts Lists
Game PCB Assembly Parts List, continued
| Designator | Description | Part No, |
Resistors
| RI | 10 KQ, +5%, % W Resistor | 110000-103 | |
| R2 | 5600, +5%, 4 W Resistor | 110000-561 | |
| R3 | 4,7 KQ, 5%, % W Resistor | 110000-472 | |
| R4 | 3300, +5%, % W Resistor | 110000-331 | |
| RS | 5.1 KQ, +5%, 4 W Resistor | 110000-512 | |
| RG | 10 KQ, +5%, 4 W Resistor | 110000-102 | |
| R7 | 4.7 KQ, +5%, % W Resistor | 110000-472 | |
| R8. | 1.0 KQ, +5%, 4 W Resistor | 110000-102 | |
| RO | 22 KQ, +5%, % W Resistor | 0000-223 | |
| RIO | 12 KQ, +5%, ‘4 W Resistor | 110000-122 | |
| RI, R12 | 2200, +5%, 4 W Resistor | 110000-221 | |
| RI3 | 560 Q, +5%, % W Resistor | 110000-561 | |
| RI4 | 820, +5%, 4 W Resistor | 110060-820 | |
| RIS | 820, +5%, % W Resistor | 110000-820 | |
| RIG | 1.0 KQ, | 5%, % W Resistor | 110000-102 |
| R17 | 820, +5%, 4 W Resistor | 110000-820 | |
| RI8-20 | 2200, +5%, % W Resistor | 110000-221 | |
| R21 | 1.2 KQ, £5%, % W Resistor | 110000-122 | |
| R22 | 5100, +5%, % W Resistor | 110000-511 | |
| R23 | 1.2 KQ, +5%, % W Resistor | 110000-122 | |
| R25 | 510Q, +5%, % W Resistor | 110090-511 | |
| R26 | 18KQ, +5%, % W Resistor | 110000-182 | |
| R27 | 1.2 KQ, +5%, % W Resistor | 110900-122 | |
| R28 | 510 2, +5%, 4 W Resistor | 110000-5i1 | |
| RAI-RAG | 1000, +5%, % W Resistor Package | 118060-101 | |
| RAT | 22 KQ, +5%, % W Resistor Package | 119001-223 | |
| RAS | 1000, +5%, % W Resistor Package | 118000-101 | |
| RA9-RA12 | 1.0 KQ, +5%, % W Resistor Package | 118001-102 | |
| RAI3 | 4.7KQ, +5%, % W Resistor Package | 118001-472 | |
| RAI4 | 1.0 KQ, 5%, % W Resistor Package | 118001-102 | |
| RAIS | 1.0 KQ, +5%, % W Resistor Package | 118001-102 | |
| RAIG | 1009, +5%, 4% W Resistor Package | 118000-161 | |
| RAI7 | 3KQ, +5%, % W Resistor Package | 118001-332 | |
| RAI8, RAIS | 22 KQ, +5%, 4 W Resistor Package | 118001-223 | |
| RA20 | 10 KQ, +5%, 4 W Resistor Package | 118000-102 | |
| VR | 10 KQ Variable Resistor | 99-200006 |
Integrated Circuit Sockets
| IC1-IC5 | 24 Contact, Medium-Insertion-Force IC Socket | 79-42C24 |
| Iclo | 24 Contact, Medium-Insertion-Force iC Socket | 79-42C24 |
| Ici5 | 40 Contact, Medium-Insertion-Force IC Socket | 79-42C40 |
| 1C27 | 40 Contact, Medium-Insertion-Force IC Socket | 79-42C40 |
| 1C82-1C84 | 24 Contact, Medium-Insertion-Force IC Socket | 79-42C24 |
| 1C86-IC88 | 24 Contact, Medium-Insertion-Force IC Socket | 79-42C24 |
(continued on next page)
Ihustrated Parts Lists
Game PCB Assembly Parts List, continued
Arabian
| Designator | Description | Part No. |
Switches
| Swi | 8 Toggle DIP Switch | 66-N8PIT |
| SW1 | Tactile Service Switch | 99-200011 |
| sw2 | 4 Toggle DIP Switch | 66-114PiT |
Transistors
| TRI, TR2 | Type D128 Transistor | 99-200001 |
| TR3 | ‘Type C1815 Transistor | 99-200002 |
| TR4-TRO | Type C752G (Y) Transistor | 99-200003 |
Arabian Illustrated Parts Lists
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING R33 CONFIDENTIAL: Reproduction forbidden ‘withoul the specific Scara writen permission of Atal, Inc, Sumyvate, CA This drawing is oO ‘only conditionally issued. and neither receipt nor possession
Cab Pao) thereol confers or transters any right in, oF license to use, the
| bed | +44 | 4 | ‘subject matter of the drawing or any design or technical informa- | |
| C| | cra | ta} | 9 | tion shown thereon, nor any right to reproduce this drawing or |
| S | ahd] | 5 | ny part thereof, Except Tor manufacture by vendors of Alar, | |
| - | $ | =| | 0 | ing and for manufacture under the corporation's wri icen |
| oR | z= | ° | ro right to reproduce this drawing Is granted or the subject m | |
| = | oy | _— | 1 Mee! ess by writen apiement wit or writen perms | |
| C20 | cal | 0 | . a | i |
cig a
| he | 3300 | -— |
35V
Ci8
| —_ | 5300 | ty | c23 | cal |
feimFE 422,
| 4 | qeleFr | 22} |
| paz | R25 | S |
| = 4asu- | cze | 2S |
= 308 Q9 pes 7812 7905
| Oo | R24, 10, 7WE- | e) | |
| Tip32 | TDAZ002A | TDAZ002A | |
| BJQ2 | INAcCOz QS 4 | Q7 = | |
| RS | cra op | T | . |
| 2.0 | Ww | pe | |
| - | R4 | C7 Ges | ciccanfSS |
SERS Leo cist
| 0 | ce | =| | Ree | Oy, |
| © | gr | 220 | Rel, |/2w | ||
| Boe | BRE | cla | yk | |
| q | al 33 | 252 | 4zo_* |
« cnet
| 4 | Clo4t | Go | |
| 4707 | 4 | Sek | RI |
i,l Lat}
| $ | ae | —S | 33dur | + |
| - | 0 | z20} | BBV |
R30 RO 12W cRI 4
| oF inscoz | a) | i] |
rm,
| bt | Oo | t+ | 3B3004F | = -— |
| 4 | a] | 35V |
_ bat
Figure 5-14 Regulator/Audio II PCB Assembly A035435-02 G
5-33
Mlustrated Parts Lists Arabian
Regulator/Audio II PCB Assembly Parts List
| Designator | Description | Part No. |
Capacitors
| cl | 470 pF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24250477 |
| c2 | 0.001 wF, 35 V, Ceramic-Disc Axial-Lead Capacitor | 122002-102 |
| 1) | 0.1 wR 25 V, Ceramic-Disc Axial-Lead Capacitor (Accepiable substitute is part no. | 29-088 |
122002-104
| C4 | 470 wF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24-250477 |
| C5 | .O1 uF, 25 V Ceramic-Disc Axial-lead Capacitor (Acceptable substitute is part no. | 100015-103 |
122005-103)
| C6 | 0.22 wk 25 V, Ceramic-Disc Axial-Lead Capacitor | 122004-224 |
| c7 | 0.001 4F, 35 V, Ceramic-Disc Axial-Lead Capacitor | 122002-102 |
| cs | 0.22 pF, 25 V, Ceramic-Disc Axial-Lead Capacitor | 122004-224 |
| C9, C10 | 3300 wF, 35 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24-350338 |
| cu | 0.1 wF, 25 V, Ceramic-Disc Axiai-Lead Capacitor (Acceptable substitute is part no. | 29-088 |
122002-104
| C12 | 470 pF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24250477 |
| C13, | 1000 wk, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24-250108 |
| cM | .01 wF, 25 V Ceramic-Disc Axial-Lead Capacitor (Acceptable substitute is part no. | 100015-103 |
122005-103)
| cis | 0.22 wE, 25 V, Ceramic-Disc Axial-Lead Capacitor | 122004-224 |
| C16 | 0.001 uF, 35 V, Ceramic-Disc Axial-Lead Capacitor | 122002-102 |
| Ci7 | 0.22 wE 25 V, Ceramic-Disc Axial-Llead Capacitor | 122004-224 |
| C18, C19 | 3300 uF, 35 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24-350338 |
| C20, C21 | 0.1 uF, 25 V, Ceramic-Disc Axial-Lead Capacitor (Acceptable substitute is part no. | 29-088 |
122002-104
| 22, C23 | 1 pF, 50 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24-500105 |
| C24 | 22 uE 45 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24-350226 |
| C31 | 22 pF, 35 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor | 24-350226 |
Diodes
| CRI | Type-IN4002, 1 A, 100 V Silicon Rectifier Diode | 311N4002 |
| CR4 | ‘Type-1N4002, 1 A, 100 V Silicon Rectifier Diode | 31-IN4002 |
| CR5-CR8 | Type-iN5401, 3 A, 100 V Silicon Rectifier Diode | 31-IN5401 |
Resistors
| R1 | 2709, +5%, %& W Resistor | 110000-271 | |
| R3. | 33.0, +5%, % W Resistor | 110000-330 | |
| R4 | 1009, +5%, “4 W Resistor | 110000-101 | |
| R5 | 2.79, +5%, 1 W Resistor | 110009-027 | |
| RO | 3.9kQ, +5%, % W Resistor | 110000-392 | |
| R7 | 75kQ, +5%, % W Resistor | 110000-752 | |
| RS. | 1 kQ Vertical PCB-Mounting Cermet Potentiometer | (Acceptable substitute is part | 19-315102 |
no. 119002-102)
| RO | 2200, +5%, % W Resistor | 110001-221 |
| RIO | 10, +5%, 4 W Resistor | 110000-010 |
| RU | 102, +5%, % W Resistor | 110000-106 |
| R12 | 100 Q, +5%, 4 W Resistor | 110000-101 |
| Ri3, RI4 | 10k, +5%, % W Resistor | 110000-103, |
(Continued on next page)
Arabian Illustrated Parts Lists
Regulator/Audio II PCB Assembly Parts List, continued
| Designator | Description | Part No. |
| R20 | 100, +5%, % W Resistor | 110000-100 |
| R21 | 2200, +5%, Y% W Resistor | 110001-22i |
| RI9 | 19, £5%, % W Resistor | 110000-010 |
| R22 | 1000, +5%, % W Resistor | 110000-101 |
| R24 | 0.10, +3%, 7 W Wirewound Resistor | 19-100P1015 |
| R25 | 49, 5%, 5 W Wirewound Resistor | 116001-040 |
| R27. R28 | 1kQ, +5%, %4 W Resistor | 110009-102 |
| R29, R30 | 100, 45%, ’ W Resistor | 110000-100, |
| R31 | 222, +5%, 10 W Wirewound Resistor | 116000-220 |
| R32, R33 | 5.6kQ, +5%, 4 W Resistor | 110000-562 |
Transistors
| Q2 | ‘TypeTIP32 PNP Power Transistor | 33-TIP32 |
| Q3 | Type-2N3055 NPN Silicon Transistor | 34-2N3055 |
Miscellaneous
| J6 | 6 Position Connector Receptacle | 79-58306 |
| y | 9-Position Connector Receptacle | 79-58308 |
| J8 | 4-Position Connector Receptacle | 79-58354 |
| Jo | 6-Position Connector Receptacle | 79-58306 |
| jie | 12-Position Connector Receptacle | 79-58346 |
| Ql | 5 V Linear Voltage Regulator | 37-LM305 |
| Q2, Q9 | Thermally Conductive Silicon Insulator | 78-16014 |
| @ | Thermally Conductive Silicon Insulator | 7816008 |
| QS | Audio Amp TDA20024 | 137151-002 |
| Q7 | Audio Amp TDA20024, | 137151-002 |
| Q8 | ‘Type-7812 +12 V Voltage Regulator | 37-7812 |
| Q9 | ‘Type-7905 -5 V Voltage Regulator | 37-7905 |
Heat Sink 034531-01 Test Point (Acceptable substitute is part no. 020670-01) 179051001
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Arabian
AC Alternating current; from zero it rises to a maximum positive level, then passes through zero again to a maximum negative level. ACTIVE STATE The true state of a signal. For example: The active state for START is low.
ADDRESS A value that identifies a specific location of data in memory; normally expressed in hexadecimal notation. ANALOG Measurable in an absolute quantity (as opposed to on or off). Analog devices afe volume controls, light dimmers, stereo amplifiers, etc, ANODE The positive (arrow) end of a diode. AMPLIFIER A device used to increase the strength of an applied signal. AMPLITUDE The maximum instantaneous value of a waveform pulse from zero. ASTABLE Having no normal state. An astable device will free-run or oscillate as long as Operating voltage is applied. The oscillation frequency is usually controlied by external circuitry. AUXILIARY COIN SWITCH A momentary-contact pushbutton, switch with a black cap located on the utility panel. The auxiliary coin switch adds credits to the game without activating the coin counter. BEZEL A cut, formed, or machined retention device, such as the conical device used to mount a pushbutton switch to a control panel, or the formed device used to frame the video display screen. BIDIRECTIONAL Able to send or receive data on the same line (€.g., the data bus of a micro- Processor). BINARY A number system that expresses all values by using two digits (0 and 1). BIT A binary digit; expressed as a 1 or a 0. BLANKING ‘Turning off the beam on a cathode-ray tube during retrace. BLOCK DIAGRAM A drawing in which functional circuitry units are represented by blocks. Very useful during initial troubleshooting. BUFFER 1, An isolating circuit designed to eliminate the reaction of a driven circuit on the circuits driving it (e.g., a buffer amplifier).
- A device used to supply additional drive capability. BUS An electrical path over which information is transferred from any of several sources to any of several destinations. CAPACITOR A device capable of storing electrical energy. A capacitor blocks the flow of DC current while allowing AC current 10 pass. CATHODE The negative end of a diode. CHIP An integrated circuit comprising many circuits on a single wafer slice.
CLOCK A repetitive timing signal for synchronizing system functions.
COINCIDENCE Occurring at the same time.
COIN COUNTER A 6-digit electro-mechanical device that counts the coins inserted in the coin mechanism(s).
COIN MECHANISM A device on the inside of the coin door that inspects the coin to determine if the correct coin has been inserted.
COMPLEMENTARY Having opposite states, such as the outputs of a flip-flop. COMPOSITE SYNC Horizontal and vertical synchronization pulses that are bused together into a single signal. This signal provides the timing necessary to keep the display in synchronization with the game circuitry. COMPOSITE VIDEO Complete video signal from the game system to drive the display circuitry, usually comprising H SYNC, V SYNC, and the video.
Glossary
CREDIT One play for one person based on the game switch settings. CRT Cathode-ray tube. DATA General term for the numbers, letters, and symbols that serve as input for device processing. DARLINGTON A two-transistor amplifier that provides extremely high gain. DC Direct current, meaning current flowing in one direction and of a fixed value. DEFLECTION YOKE Electro-magnetic coils around the neck of a cathode-ray tube. One set of coils deflects the electron beam horizontally and the other set deflects the beam vertically. DIAGNOSTICS A programmed routine for checking circuitry. For example: the self-test is a diagnostic routine. DIODE A semiconductor device that conducts in only one direction. DISCRETE Non-integrated components, such as resistors, capacitors, and transistors. DMA Direct memory access. DMA is a process of accessing memory that bypasses the microprocessor logic. DMA is normally used for transferring data between the input/output ports and memory. DOWN TIME The period during which a game is malfunctioning or not operating correctly due to machine failure. EAROM Electrically alterable read-only memory (see ROM). The EAROM is a memory that can be changed by the application of high voltage. FLYBACK A step-up transformer used in a display to provide the high voltage. GATE
- Acircuit with one output that responds when and only when a certain combination of pulses is present at the inputs.
Gh
Glossary
- A circuit in which one signal switches another signal on and off.
- To control the passage of a pulse or signal. HARNESS: A prefabricated assembly of insulated wires and terminals ready to be attached to a piece of equipment. HEXADECIMAL A number system using the equivalent of the decimal number 16 as a base. The symbols 0-9 and A-F are usually used, IMPLODE To burst inward; the inward collapse of a vacuum tube. vo Input/Output. IRQ Interrupt request. IRQ is a control signal to the microprocessor that is generated by external logic. This signal tells the microprocessor that external logic needs attention, Depending on the program, the processor may or may not respond. LED The abbreviation for a light-emitting diode. LOCKOUT COIL Directs coins into the coin return box when there is no power to the game. LOGIC STATE The binary (1 or 0) value at the node of a logic element or integrated circuit during a particular time. Also called the logic level. The list below shows the voltage levels corresponding to the logic states (levels) ina TTL system. Logic 0, Low = 0 VDC to +0.8 VDC Grey Area (Tri-State Level) = +0.8 VDC to +2.4 VDC Logic 1, High = +2.4 VDC to +5 VDC MULTIPLEXER A device that takes several low-speed inputs and combines them into one high-speed data stream for simultaneous transmission on a single line. NMI Non-maskable interrupt. NMI is a request for service by the microprocessor from external logic. The microprocessor cannot ignore this interrupt request. PAGE A subsection of memory. A read-only memory device (see ROM) is broken into discrete blocks of data. These blocks are called pages, Each block has X number of bytes.
GL2 PCB The abbreviation for a printed-circuit board. PHOTOTRANSISTOR A transistor that is activated by an external light source. POTENTIOMETER
- A resistor that has a continuously moving contact which is generally mounted on a moving shaft. Used. chiefly as a voltage divider. Also called a pot (slang).
- An instrument for measuring a voltage by balancing it against a known. voltage. RAM Random-access memory. A device for the temporary storage of data. RASTER-SCAN DISPLAY A display system whereby images are displayed by continuously scanning the cathode-ray tube horizontally and vertically with an electron beam. The display system controls the intensity of the electron beam. RETRACE In a raster-scan display, retrace is the time during which the cathode-ray tube electron beam is resetting either from right to left or from bottom to top. RESISTOR A device designed to have a definite amount of resistance. Used in circuits to limit current flow or to provide a voltage drop. ROM Read-only memory. A device for the permanent storage of data. SIGNATURE ANALYSIS A process of isolating digital logic faults at the component level by means of special test equipment called signature analyzers. Basically, signature analyzers (e.g., the ATARI® CAT Box) convert lengthy bit streams into four-digit hexadecimal signatures. The signature read. by the analyzer at each circuit node is then compared with the known good signature for that node. This process continues until a fault is located. TROUBLESHOOT The process of locating and repairing a fault.
VECTOR A line segment drawn between specific X and Y coordinates on a cathode-ray tube. WATCHDOG A counter circuit designed to protect the microprocessor from self-destrucvon if a program malfunction occurs. If Arabian
a malfunction does occur, the counter applies continuous pulses to the reset line of the microprocessor, which causes the microprocessor to keep resetting. X-Y DISPLAY A display system whereby images are displayed with vectors. ZENER DIODE A special diode used as a regulator. Its main characteristic is breaking down at a specified reverse-bias (Zener) voltage.
Arabian™ Ist printing
YOUR COMMENTS, PLEASE!
Your comments will assist Atari in improving our publications, The comments are an important part of preparing for revisions of game manuals, Please write in the space below. No postage stamp is necessary if mailed in the U.S.A.
If you have any technical questions about certain ATARI games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.
Page: Comments:
Fill in if you wish a reply:
Name
Firm 1 Distributor
Address UO Operator
City _ State Zip UO Other
Area Code Phone
First Fold ee — ——
USINESS REPLY MAIL
i CLASS, PERMIT NO. 1004 SUNNYVALE, CA
POSTAGE WILL BE PAID BY ADDRESSEE
Atari, Inc. Attn.: Field Service/Coin-Op Division P.O. Box 427 Sunnyvale, California 94086
Second Fold No postage necessary if mailed in the United States
aSpa snp adey,
ES SE RS ES ES ES Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays (in games supplied with displays) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller’s other products or parts thereof are warranted. If the products described in this manual fail to conform to this warranty, Seller’s sole liability shall be, at its option, to repair, replace, or credit Buyer's account for such products which are returned to Seller during said warranty period, provided:
- Seller is promptly notified in writing upon discovery by Buyer that said products are defective; (b)Such products are returned prepaid to Seller’s plant; and (c)Seller’s examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation, or improper testing. In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages. Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms berein, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products by Seller.
The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to you and others, Be very cautious in using non-Atari-supplied components with our games, in order to insure your safety. Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor.
A.
ATARI
ATARI, INC, 790 SYCAMORE DRIVE P.O. BOX 906 MILPITAS, CALIFORNIA 95035 408/942-3100 * TELEX 35-7488 res conmncaton company