CATHODE RAY TOMES

Mortal Kombat 2 (Dollar Bill Validtor Operation (16-9664 Nov 15 1997)

Mortal Kombat 2 (Dollar Bill Validtor Operation · Document · 1 pages · original scan

Page 1

November 15, 1993

IMPORTANT NOTICE

MORTAL KOMBAT II DOLLAR BILL VALIDATOR OPERATION

In Order To Use A Dollar Bill Validator With A Mortal Kombat II Video Game...

  • With Revision 1.0 Software installed in the CPU Board, implement the following:
  • Change the DIP Switch settings. Set switch #1 of DIP Switch bank #2 to On. This” enables the CMOS to control the pricing. Set switch #6 of DIP Switch bank #1, to On. This tells the CPU that a DBV is installed.
  • Press the Begin Test switch inside the coin door and select the Game Adjustments Menu. (See page 1-17 of the MORTAL KOMBAT II Manual.) From the Game Adjustments Menu, select Custom Pricing. (See page 1-20 of the Mortal Kombat II Manual.)
  • Set the Custom Pricing to the following: Left Chute Units = 1 Credit Per Coin Right Chute Units = 1 Credit Per Coin Third Chute Units = 4 Credits Per Coin
  • Insert a dollar bill into the validator. Be sure that 1 pulse per 1 dollar bill is registered from the validator.
NOTE: Set DBV pulse width to 50 mSec On, 300 mSec Off.