Mesmerizer
Mesmerizer (Innovative Concepts in Entertainment Inc., 2001) · Document · 10 pages · 29 sections · original scan
OWNERS AND SERVICE MANUAL
©2001 INNOVATIVE CONCEPTS IN ENTERTAINMENT INC.
10123 MAIN STREET, CLARENCE, NEW YORK 14031
SERVICE 716-759-0360 SALES 716-759-0370 FAX 716-759-0390 E MAIL play@icegame.com
TABLE OF CONTENTS
- INTRODUCTION / INSTALLATION
- PROGRAMMING OPTIONS
- TROUBLESHOOTING
- PARTS LISTINGS
- SCHEMATICS
- WARRANTY INFORMATION
INTRODUCTION & SET-UP
FEATURES
Thank you for purchasing the new MESMERIZER™ coin operated amusement game from |.C.E. Please read this manual to fully understand the operation and servicing of this game.
This game has been designed to be as trouble free as possible. Our latest technology has been employed to assure the best quality and game ownership experience.
MESMERIZER™ incorporates simple one button game play to assure the widest audience base possible. Everybody "WINS" with MESMERIZER™, but multiple wins can get you the big Ticket Bonus. The easy game play assures repeat business and lots of fun for the game player.
Our cabinet design is a unique blend of material components.
A special high quality marine grade plywood is used to assure unparalleled strength and moisture resistance.
The Upper cabinet and dome are made of impact resistant plastics to assure years of good durability and looks.
The lower cabinet is constructed of wood, plastic and Special Epoxy powder coated steel panels.
All of the electronics in MESMERIZER™ have been designed using proven technology to assure the greatest reliability possible.
An integrated high quality audio amplifier has been used to assure the best quality sound reproduction.
A bright, backlit printed multi-colored spinning wheel and flashing red neon light ring compliment the "Groovy" 60's theme of the game. SET-UP
The MESMERIZER™ game is almost ready to go with just a little bit of set-up.
The game comes fully assembled other than the top Marquee.
To install the marquee, connect the harnesses for the strobe and florescent lighting, and install the (4) four 1/4-20 kep nuts to install the marquee to the back of the game.
That's it! Program your game as shown in the next section, and you're ready to go!
USING THE PROGRAMMING BUTTONS
There are 4 buttons on the cash box enclosure of the game. (Inside coin door) Their operation is detailed below.
PROGRAMMING BUTTON - This button is used to enter and exit the programming mode. Quickly depress and release the button.
SELECT BUTTON - This button is used to select which programming option you would like to adjust. Quickly depress and release the button to move through the options. NOTE: The options will be displayed on the control panel display.
STEP BUTTON - This button is used to step through and CHANGE the value of any particular option. Quickly depress and release the button to move through the option values. NOTE: The option values are shown on the large BONUS display on the back cabinet of the game.
RESET BUTTON - This button is used to reset or cancel the tickets owed in the game. Use this button when reloading tickets if you do not want the game to finish paying out what it might owe.
COINS PER CREDIT
(OPTION #1)
This option determines how many coins it takes to play 1 game. The range for this option is 0-8. Setting a “O” puts the game into free play mode. The default value for this mode is “1”
ATTRACT MINUTES
(OPTION #2)
This option determines how many minutes between the attract mode. The range for this option is 0-90 minutes. Setting a “O” turns the attract mode off. The default value for this option is 5 minutes.
HITS TO WIN
(OPTION #3)
This option determines how many successful hits in a row are necessary to win the game and receive the bonus. The range for this option is 8- 16 hits. The default value for this option is 10.
WHEEL R.P.M. START
SPEED
(OPTION #4)
This option determines the starting (or static) R.P.M. (speed) of the wheel. On a game using the skill speedup option, this will be the start up speed. On a game not using the speedup option, this will be the constant wheel speed. The range for this option is 6-16 R.P.M. The default value for this option is “10”.
DO SKILL SPEEDUP (OPTION #5)
This option determines whether or not the wheel speed will increase over the duration of the game. Setting a “1” enables this option. The default value for this option is “1”
DIFFICULTY / NARROWING PCT. (OPTION #6)
This option determines if the game will electronically increase the difficulty of the game by narrowing the “win” wedge opening by a certain percentage. The percentage of opening can be decreased by 1-45 percent. Setting a “0” turns off the difficulty option. Setting a “45” would decrease the hittable area by 45 percent. The default value for this option is “25”
MINIMUM BONUS /
RESET VALUE
(OPTION #7)
This option determines the value of the jackpot OR the minimum value of the jackpot in a progressive bonus arrangement. The range of this option is 50 — 200. The default value for this option is “50”
MAXIMUM BONUS
(OPTION #8)
This option determines the Maximum value of the bonus in a progressive jackpot set-up. The range of this option is 199-999. The default value for this option is “499”.
BONUS INCREMENT
(OPTION #9)
This option turns on the progressive bonus option, AND determines how much the bonus will go up each time the game is played and nobody wins. Setting a “O” turns the progressive option off. The range for this option is 0-20. The default value for this option is “0”.
BONUS NOW
(OPTION #10)
This is an accounting mode that tells you the present value of the bonus payout.
CLEAR BONUS (OPTION #11)
This option will clear the bonus value and return it to the minimum value.
BASE TICKETS FOR LOSING (OPTION #12)
This option determines how many tickets are given out just for plating regardless of any other ticket settings. The range of this option is 0-9. Setting a “O” turns this option off. The default value for this option is “1”
HIT STEPS FOR NEXT TICKET INCREMENT (OPTION #13)
This option determines how many “wins” are hit before the ticket amount will increase. The range for this option is 1-5 “wins”. The default value for this option is “1”
TICKET AMOUNT PER
STEP
(OPTION #14)
This option determines the amount of tickets that will be dispensed each time the next payout step (as set in option 13) is reached. The range for this option is 0-9. The default value for this option is “1”
ACCOUNT CREDITS
(OPTION #15)
This option tells you how many credits have been played since the last accounts cleared.
ACCOUNT WINS
(OPTION #16)
This option tell you how many times the bonus has been won since the last accounts cleared.
ACCOUNT, TICKETS
(OPTION #17)
This option tells you how many tickets have been won since the last accounts cleared. THE FOLLOWING OPTIONS (18-33) TELL YOU HOW MANY 1 HIT, 2 HIT, 3 HIT, ETC. GAMES HAVE BEEN PLAYED. THIS WILL HELP YOU GAUGE FURTHER THE PLAYER PROFILE OF YOUR LOCATION. THIS CAN HELP TO SET UP THE GAME FOR GREATER EARNINGS.
- 1 HIT GAMES
- 2HIT GAMES
- 3 HIT GAMES
- 4 HIT GAMES
- 5 HIT GAMES
- 6 HIT GAMES
- 7 HIT GAMES
- 8 HIT GAMES
- 9 HIT GAMES
- 10 HIT GAMES 28.11 HIT GAMES
- 12 HIT GAMES
- 13 HIT GAMES
- 14 HIT GAMES
- 15 HIT GAMES
- 16 HIT GAMES
ACCOUNT CLEAR (OPTION #34)
This option clears ALL of the accounting information. Setting a “1” enables the reset option. The default value for this option is “O”
FACTORY RESET (OPTION #35)
This option clears ALL of the custom game settings as well as all of the accounting information. Setting a “1” enables the reset option. The default value for this option is “O”
MOTOR PULSE WIDTH MODULATION TEST
(OPTION #36)
This is a factory / diagnostics test to see that the motor is capable of delivering at least 16 R.P.M.
TROUBLESHOOTING
GAME WILL NOT TAKE OR ADD MONEY CORRECTLY e Micro switch not working or returning properly. Check and repair or replace as necessary. e Bad Harnessing or connector. Check w/ohm meter and repair as necessary. « Game programming set incorrectly. Check programming option and re-program if necessary. e Bad Main P.C. Board. Check and repair or replace as necessary.
HIT BUTTON WILL NOT FLASH WHEN GAME HAS CREDITS, OR WORK WHEN PUSHED Micro switch not working properly. Test and replace as necessary. Micro switch popped out of housing. Snap back into housing. Burned out light bulb. Replace light bulb. Bad harnessing or connector. Check w/ohm meter and repair as necessary. Bad Main P.C. Board. Check and repair or replace as necessary. eooeee
GAME HAS NO SOUND e Bad speaker. Check w/ohm meter for 4 or 8-ohm load. If not within this range, replace. e Volume level set incorrectly. Check volume level in programming, and adjust if necessary. e Bad Harnessing or connector. Check w/ohm meter and repair as necessary. e Bad Main P.C. Board. Check and repair or replace as necessary
TICKET DISPENSER DOES NOT WORK OR WORKS IMPROPERLY e Bad ticket dispenser. Repair or replace as necessary. Bad harnessing or connector. Check w/ohm meter and repair as necessary. Bad Main P.C. Board. Check and repair or replace as necessary. Game out of tickets. Add tickets Optical sensor on ticket dispenser dirty. Remove paper fuzz and debris with a soft brush. coocee
NO FLORESCENT LIGHTING e Bulb burned out. Replace bulb. e Electronic ballast bad. Replace ballast. e Harness bad or harness unplugged. Check w/ohm meter and plug in, repair or replace as necessary. e NoA.C. power to the game or Main fuse bad. Check fuse and A.C. power.
WHEEL WILL NOT SPIN OR SPIN PROPERLY
Motor burned out. Replace motor. Motor drive transistor burned out. Replace drive transistor. Main P.C. Board damaged. Repair or replace Main P.C. Board. Motor harnessing damaged. Repair damaged harnessing. Wheel position optical transmitter or receiver bad. Repair or replace as necessary. Wheel position optical sensor blinded by light. Make sure light shroud is secure around sensor.
GAME WILL NOT SCORE PROPERLY + Main P.C. Board damaged. Repair or replace Main P.C. Board. Motor harnessing damaged. Repair damaged harnessing. + Wheel position optical transmitter or receiver bad. Repair or replace as necessary. + Wheel position optical sensor blinded by light. Make sure light shroud is secure around sensor. + Score LED damaged. Repair or replace as necessary.
RING LIGHTS, NEON, OR STROBE LIGHT WILL NOT FLASH OR WORK PROPERLY
- Drive transistors on Main P.C. board bad. Replace drive transistors. + Bulb or tube burned out. Replace tube or bulb. + Harnessing bad. Repair or replace as necessary.
IF YOU HAVE ANY FURTHER QUESTIONS OR COMMENTS, PLEASE CONTACT OUR SERVICE DEPARTMENT AT 1-716-759-0360 - MONDAY THRU FRIDAY 8:00AM - 5:00PM
PARTS LISTINGS
MECHANICAL PARTS
FP1004 Leg Leveler Mounting Bracket MZ1016 Arrow, Large MZ1017 Arrow, Small MZ1018 Deflector cover FP1019 Leveler Foot, Long BW2017 Plastic Fluorescent Bulb Clip BW2018 Plastic Fluorescent Bulb Support BZ3006 Zamperella Bulb Assy. - Yellow MZ3006 Zamperella Bulb Assy. - Clear MZ3006A Zamperella Bulb Assy. - Red MZ3006B Zamperella Bulb Assy. - Orange MZ3006C. Zamperella Bulb Assy. - Green MZ3006D Zamperella Bulb Assy. - Blue MZ3009X Playfield Hub Assembly MZ3021 Plastic bolt Cap MZ3023X Marquee Assembly MZ3024 Mesmerizer Dome
ELECTRICAL /
ELECTRONIC PARTS
MZ2001X Neon Transformer MZ2003X Neon Light Ring Assembly MZ2003RX Receiver P.C. Board Assembly MZ2003TX Transmitter P.C. Board Assy. MZ2005 Round Push Button, 4" White AR2007 Speaker, 6" X 9" MZ2008X Playfield Motor CC2027 Power Cord, 20 Ft. Comp. Style MZ2032X Message Display P.C. Board MZ2033X Bonus Display P.C. Board MZ2034X Main P.C. Board MZ2035X Strobe Light Assembly MZ2050X Door Harness HH2050 Power Module MZ2055X Power Module Harness MZ2060X Opto / Motor Harness
MZ2061AX Power Extension Harness
MZ2064X Neon Transmitter Harness MZ2066X Transformer Extension Harness MZ2067X Motor Drive Transistor Harness HH5005 Ticket Dispenser 8201 TIP 125 Transistor MZ8284X Ballast Assembly 8312 PLL-40W/41/RS/IS Fluorescent MZ7000 MZ7001 MZ7002 MZ7003 MZ7004 MZ7005 MZ7006 MZ7007 MZ7008 MZ7010 MZ7012 MZ7013 MZ7014. MZ7021 MZ7027 MZ9010
GRAPHICS
Podium, Left Side Decal Podium, Right Side Decal Hub Cover Decal Playfield Decal Light Ring Decal Push Button Decal Control Panel Side Decal Base Front Overlay Decal Control Panel Overlay Decal Base Front Strip Decal "Hit Red" Decal, Large "Hit Red" Decal, Small ICE Logo Decal Programming Decal Marquee Decal Service Manual
WARRANTY
|.C.E warrants all components in the MESMERIZER™ game to be free of defects in materials and workmanship for a period of ninety days from the date of purchase.
This warranty does not cover items damaged due to normal wear and tear, subjected to abuse, improperly assembled by the end user, modified, repaired, or operated in a fashion other than that described in the service manual.
If your MESMERIZER™ game fails to conform to the above-mentioned warranty, |.C.E.'s sole responsibility shall be at its discretion to repair or replace any defective component with a new or remanufactured component of equal to or greater O.E.M. specification.
|.C.E. will assume no liability whatsoever, for costs associated with labor to replace defective parts, or travel time associated therein.
|.C.E.'s obligation will be to ship free of charge, replacement parts by U.P.S. Ground, U.S. mail, or other comparable shipping means. Any express mail or overnight shipping expense is at the cost of the purchaser.
e Products will be covered under warranty only when:
e The serial number of the game with the defective parts is given.
e The serial number of the defective part, if applicable, is given.
e Defective parts are returned to |.C.E., shipping pre-paid, in a timely fashion, if requested by I.C.E.
e Acopy of the sales receipt is available as proof of purchase upon request of I.C.E.
|.C.E. distributors are independent, privately owned and operated. In their judgment, they may sell parts or accessories other than those manufactured by I.C.E. We cannot be responsible for the quality, suitability, or safety of any non-l.C.E. part, or any modification, including labor, which is performed by such a distributor.