Golden Tee 98
Golden Tee '98 (v1.10) (Incredible Technologies, 1998) · Manual · 52 pages · 69 sections · original scan
INSTALLATION MANUAL
INCREDIBLE TECHNOLOGIES, INC.
SERVICE / SALES (800) 262-0323
FAX (847) 870-0120 Hardware and Software ©Copyright 1998 Incredible Technologies, Inc. All rights reserved.
WARRANTY, REPAIR and RETURN POLICY
- 90-day warranty on all electronic components. All warranty periods begin on the date of purchase from Incredible Technologies, Inc.. °
¢ There is a minimum $40.00 service charge for all non-warranty repairs or returns.
« Forall servicing return to Incredible Technologies, Inc.
e ANY non-factory repair or attempted repair voids warranty.
e AAMA decal must not be removed from the PCB. Warranty voided if removed.
RETURN MERCHANDISE AUTHORIZATION
¢ All returned merchandise must have a Return Merchandise Authorization (RMA) number marked clearly on the outside of the package.
e You must obtain all RMA numbers from your authorized Incredible Technologies, Inc. distributor. Please have your Incredible Technologies, Inc. serial number available when calling for an RMA number.
- Merchandise returned without an RMA number will not be accepted.
¢ Advance replacement boards will be shipped to distributors or, at the distributor's request, will be shipped directly to the operator.
- Advance replacement boards will be billed to the distributor until Incredible Technologies, Inc. receives the returned board, at which time a credit will be issued.
- Allrepairs and/or replacements will be shipped within 24 hours of receipt or request (subject to availability).
FCC REGULATION COMPLIANCE
This equipment complies with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
1- GETTING STARTED...
GAME PACKAGE CONTENTS .. RECOMMENDED TOOLS AND SUPPLIES
2 - INSTALLATION PREPARATIO)
‘THE CABINET Power Requirements. Monitor Requirements. Cabinet Selectio CONTROL PANEL .. Trackball Preparation. Button Preparatio GRAPHIC OVERLAYS Control Panel Overlay Installation Function Labels Overlay Installatio Marquee Installation... WIRING AND HARDWARE ASSEMBLY .. Control Panel Assembly. Printed Circuit Board (PCB). Wire Harness.
Coin Doors, Test Switch, Service Button, and Volume Control Panel. Mars Light Hookup (optional, Final Check LED SIGN (ITS)
3 - CONNECTING THE PHONE LINE (ITS)...
Node Connections. Phone Connections.
4 - INITIAL POWER-UP...
5 - DIP SWITCH SETTINGS.
6 - OPERATOR MODE...
‘VOLUME SETTINGS.. ITS COLLECTION REPORT AS DOLLARS (ITS) ITS COLLECTION REPORT As Cowns (ITS). OPERATOR ADJUSTABLES. Game Mode Selection Game Resets .. Attract Mode Sounds 15, Credits and Coin Door Settings 16 Delay Time Adjustment. 16 Skill Level Adjustment (In Regular Play Only] Hole In One Contest Mode (In Regular Play Only, Coin Door Protection Menu. GAME AUDITS .. Display Coin Audit Display Game Selection Audits . Number of Golfers and Holes Playet Arbor Hill Audits. Bayou Bend Audits 19 Palm Grove Audits 19 Display Hardware Audits 19 Reset Audits 20
1 - Golden Tee Golf ‘98 TOURNAMENT MENU (ITS) Tournament Operator Adjustables. Display Tournament Audits. Display Timers. LEADERBOARD MENU . Display Leaderboard Menu. Clear Leaderboard Menu. SYSTEM TESTS MENU. Video Screen Test Full GROM Checksum Test.. Fast GROM Checksum Test.. Video RAM Test Palette RAM Test. Board Test Sound Test Control Panel Test.. Voltage Adjust Test. Sign Test (ITS) Serial Port Test (ITS)..
APPENDIX A GENERAL TROUBLESHOOTING..
PHONE LINE CONNECTION PROBLEMS (ITS). PHONE LINE CONNECTION PROBLEMS (ITS). VIDEO PROBLEMS SOUND PROBLEMS.. CONTROL PROBLEMS. POWER-UP PROBLEMS LED SIGN PROBLEMS (ITS) MISCELLANEOUS PROBLEMS.
APPENDIX B JAMMA HARNESS CONNECTION & CABINET SCHEMATIC...
JAMMA HARNESS CONNECTION ‘TRACKBALL HARNESS CONNECTION .. CABINET SCHEMATIC ...
APPENDIX C ITS TOURNAMENT OVERVIEW (ITS)...
Game Highlights. Tournament Highlights
ITS GAME INITIALIZATION FORM ITS DEBIT ACCOUNT FORM..
APPENDIX D ITS TOURNAMENT PROCEDURES (ITS).
OFFICIAL TOURNAMENT RULES. BEGINNING A TOURNAMENT COLLECTION PROCEDURE ENDING A TOURNAMENT.. PRIZE CLAIM PROCEDURE TOURNAMENT ICONS.
APPENDIX E FREQUENTLY ASKED QUESTIONS ABOUT THE ITS
APPENDIX F WARRANTY INFORMATION
1 Getting Started
Game Package Contents
Non-Tournament Kit Version:
- Printed Circuit Board (PCB) Assembly
- Connecting Wire Harness AMMA)
- Trackball Assembly w/Metal Plate
- Trackball Cable Assembly
- Button Assemblies
- Marquee Styrene
- Marquee Plexiglas
- Control Panel Overlay
- Set of Function Labels
- Manual
ITS Tournament Version:
- Golden Tee '98 Golf Tournament Cabinet
- Tournament Operation Manual
- Monitor Manual
- Bill Acceptor Manual
- 50 ft. Telephone Cable
- Telephone Line T-Splitter
- Envelope of important operator forms
Recommended Tools and Supplies
Non-Tournament Kit Version:
Phillips and Slotted Screwdrivers Socket Set, Wire Cutters and Strippers Pliers or Channel Locks
Chassis or Sheet Metal Punch Razor Knife and Sharp Blades
Assorted Fastening Hardware Ce Masking Tape or 4" Wire Ties
IF YOU DO YOUR OWN PAINTING, YOU'LL NEED THESE PAINT SUPPLIES:
Air Brush or Paint Sprayer Paint Brush, Paint Roller and Pan Paint (and Primer) Sandpaper Electric Drill with 3/32", 4", and 7/16" Bits
Soldering Iron and 60/40 Resin Core Solder
Heat Shrink Tubing (3/32", 1/8", and 3/16") ITS Tournament Version:
© Normal telephone outlet that connects to an outside phone line.
Inexpensive telephone, used to test the line connection.
© Voltmeter - used to verify voltage on the PCB.
2 Installation Preparation
BEFORE YOU START.....
- Check to see if all the needed parts have been included in your kit or tournament cabinet (See Game Package Contents)
- Do you have the necessary tools? (See Recommended Tools and Supplies)
- Do not work with any part of the system plugged in (lights, monitor, or power supply).
Golden Tee Golf ’98 - 2
The Cabinet
Power Requirements
Make sure the game you have chosen to convert is able to supply all the required voltages for GOLDEN TEE ‘98.
+5 VDC 5Samps +12 VDC 2 amps
The output level of many "regulated" switching power supplies actually vary with load. For this reason, the power supply from an old game may not be correctly adjusted for GOLDEN TEE '98. This makes the existing power supply inappropriate and hazardous to your new game. Therefore, it is very important to adjust the +5 VDC supply WITHOUT connecting the PCB, then readjusting it later, after the PCB has been installed. Measure power on the PCB, on an IC. Damage will
occur if the power supply is outside the
acceptable limits (between 4.8 and 5.5 VDC.)
Monitor Requirements
GOLDEN TEE ‘98 requires a monitor in a horizontal mount raster scan with negative composite SYNC. It can be difficult to change the monitor from vertical to a horizontal unit, therefore, installation will be easier if you choose a horizontal mount cabinet.
Cabinet Selection
You can choose either a new cabinet or a used cabinet for your GOLDEN TEE ‘98 game. Reusing a cabinet is by far the most cost-effective way to maximize the return of your initial investment. In either case, all you need to provide is the cabinet with a power supply and monitor. We provide the rest. The end result is a new game at a very low cost. \\
It is recommended that a large contro! panel with a 25" monitor, like those on a 4-player cabinet, be used for your GOLDEN TEE '98.
3 - Golden Tee Golf ‘98 When selecting a cabinet, keep this in mind:
A cabinet with a 25" monitor and a large control panel will allow you to mount the trackball farther from the monitor. This prevents players hands from hitting the monitor glass when rolling the trackball forward, and will earn better than a smaller control panel with a smaller monitor.
- Remove the following from the cabinet:
Main Logic Board(s) Control Panel Monitor Plexiglas Marquee Cabinet Graphics
- Thoroughly clean out your cabinet. Remove all the old buttons, joysticks and wires from the control panel. DO NOT remove monitor and speaker wires.
- Remove the old graphics and adhesive from the control panel, and the side of the cabinet. Remove adhesive with solvent.
- Fora fresh look, painting is highly recommended. Spray painting gives a better finish, but if an air brush or paint sprayer is unavailable, a roller is second best. Remember to cover all exposed surfaces not to be painted.
- Remember, spending time on the cabinet's appearance (i.e., marquee, control panel, and cabinet graphics) will raise your profits with the introduction of a new game package, especially if the cabinet looks clean and new.
- The "new game look" should always apply to the inside of your game as well. A few wire ties and shrink tubing on your harness, some fastening hardware on your subassemblies, and a sweep with the vacuum cleaner will ensure that glitches do not occur.
Trackball Preparation
When making the hole for the Mounting the trackball correctly and securely is very N ig trackball, follow the instructions,
TRACKBALL
° MONITOR
2 4 a. eaorsoa we o © 316 Mounting Holes i tc Lo iviminety |
from hitting the monitor glass when rolling the j
trackball forward. JL
- \
Ce _ PLAYER e IMPORTANT: pesroeracteahemacied srogr
TRACKBALL ORTENPATION NOT DRAWN TO SCALE)
The supplied trackball comes equipped with a grounding cable. This cable must be connected to field ground to protect the trackball P.C. boards from becoming damaged by electro-static discharge.
Golden Tee Golf ’98 - 4
Fill any existing holes in the metal control panel.
- Place and secure TEMPLATE #1 to your control panel in the desired location.
- Carefully drill the holes for the ball and the mounting bolts using the template as a guide.
- Remove template and file down any rough edges.
- See Graphic Overlays section on page 6 on how to install the graphics.
- Mount trackball under the metal control panel using the four carriage bolts.
- Securely fasten the trackball grounding wires to Field Ground in your cabinet. This step is
- If using Plexiglas on your control panel, it is highly recommended that a 3-1/2" hole be cut in the Plexiglas for the trackball. This allows for players to use the full height of the trackball. Carefully file and smooth the edges of the hole in the Plexiglas so players do not cut their hands when playing.
5 - Golden Tee Golf ‘98 Fill any existing holes in the wooden control panel.
Place and secure Template #2 to your control panel in the desired location.
Carefully cut the hole for the trackball in the shape indicated on the template.
Drill the mounting holes indicated.
Next route out the shaded area indicated on TEMPLATE #2, 1/16" deep. Use a 1/2" Rabbiting Bit for best results. This is so the supplied metal plate will be flush with the control panel surface.
Remove template and file down any rough edges.
See Graphic Overlays section on page 6 on how to install the graphics.
Mount trackball to the metal plate using the four carriage bolts supplied. Then mount the metal plate to the wooden control panel.
Securely fasten the trackball grounding wires to Field Ground in your cabinet. This step is
. If using Plexiglas on your control panel, it is highly recommended that a 3-1/2" hole be cut in the Plexiglas for the trackball. This allows for players to use the full height of the trackball. Carefully file and smooth the edges of the hole in the Plexiglas so players do not cut their hands when playing.
Fill any existing holes in the wooden control panel.
Place and secure Template #3 to your control panel in the desired location.
Carefully cut the hole for the trackball in the shape indicated on the template. The trackball should fit the hole shape exactly.
Drill the mounting holes as indicated.
Remove template and file down any rough edges.
Using the Trackball Orientation template, cut a3" hole in the Plexiglas overlay to fit over the trackball. Be sure to include holes for the buttons, and all of the mounting bolts.
See Graphic Overlays section on page 6 on how to install the graphics.
Insert the trackball into the newly cut hole. Place Plexiglas overlay on top of the control panel. Place the supplied metal plate under the trackball and use the carriage bolts to secure it to the control panel. The metal plate below and the Plexiglas above will secure the trackball assembly into position.
Securely fasten the trackball grounding wires to Field Ground in your cabinet. This step is
1. When making the holes for the buttons, DO NOT use the Function Labels to outline any new holes. The Function Labels are designed to fit right over the buttons when installed on the control panel. If the labels are used as a template the holes will be too big, and the buttons will fall through. Instead, use the labels as a guide to where you want to drill your new holes, and then cut a 1-1/8" hole in the center of where the labels are to be placed. DO NOT stick the labels to the panel at this time.
Drill or punch the holes marked for buttons or bolts. Use a chassis or sheet metal punch for best results on button holes.
Use a file to smooth any rough edges on the holes.
Fill any old and unused holes with wood, resin, or a metal plate.
It is recommended that you cover your control panel with Plexiglas. Now would be a good time to cut it to fit while the dimensions and tools are at hand.
Graphic Overlays
GOLDEN TEE '98 comes equipped with graphics that will accommodate a variety of existing game cabinets.
Control Panel Overlay Installation
1. Make sure the control panel is clean and free from dust, grease, metal filings, and sawdust. The background overlay provided with the game is oversized to accommodate most control panel sizes. Center the background overlay on the control panel surface. Be sure to leave enough excess material above and below the control panel in order to trim it evenly.
Remove the protective backing from the background overlay. Center the background overlay over the control panel and place down gently, making sure to keep it square. Using your hands, press down firmly, starting from the center and smooth the background overlay outward, making sure all bubbles have been pressed out for a clean, flat surface.
Golden Tee Golf °98 - 6
- Using a sharp razor knife, trim any excess from the background overlay. Carefully pierce through the overlay above each control panel hole that you have marked. Cut out material covering the predrilled holes with the razor knife. Be sure to cut the background overlay above each hole and trim cleanly and evenly.
Function Labels Overlay installation
Line up the supplied function labels with the corresponding control panel holes. Remove the backing and carefully press into place. Be sure they are straight. Attach the HOOK/SWING reference diagram above the trackball label. If your control panel is too narrow to fit the reference diagram, mount the diagram under the monitor glass on the bezel. Refer to the diagrams below.
HOOK / SWING Reference Overlay STRUCTION TRACKBALL OVERLAY e.
FACELERT. FACE RIGHT ‘venta “ovemay
FUNCTION LABEL LAYOUT #1
or put the HOOK/SWING Reference diagram on the bezel
MONITOR,
FUNCTION LABEL LAYOU!
Marquee Installation
If your cabinet needs a new marquee glass, determine the correct size and cut the Plexiglas (supplied) to fit. Using the old marquee glass as a template, center the Plexiglas on your new marquee graphics, making sure that all the printed images will be visible. Using a razor knife, score the new marquee deeply, following the edges of the old glass. Carefully break off the styrene. Be sure the light behind the marquee works and that the glass is clean on both sides. Now install the marquee graphics and glass securely.
7 - Golden Tee Golf ‘98
Wiring and Hardware Assembly
MBER! DO NOT WORK WITH ANY PART OF THIS
TEM PLUGGED IN (Lights, Monitor, or Power Supply. RE
All switch wires used in this game need to be wired to the normally open connection on the switches. Each switch requires a ground wire on the common connector and the appropriate control or switch wire on the other normally open connector of the switch.
Control Pane! Assembly
- Install the trackball and buttons on the control panel by following the detailed instructions beginning on page 2. The two red buttons are used for FACE LEFT and FACE RIGHT. The white button is used as the START button.
If you want your new game to earn money, you must install the trackball correctly.
- Ifyou are using Plexiglas for added protection, don't forget to place it on the panel before inserting the buttons.
- Wire the trackball and buttons using the JAMMA Harness Connection and Cabinet Schematic table on page 34. Connect the trackball using the supplied trackball cable into PLAYER 1 on the PCs.
The supplied trackball comes equipped with a grounding cable. This cable must be connected to field ground to protect the trackball P.C. boards from becoming damaged by electro-static discharge.
Printed Circuit Board (PCB)
Mount the PCB to the side of the cabinet with the connector toward the top of the drawer. This will keep the wire harness from slipping off due to vibration. Mark and drill pilot holes (3/32") onto the cabinet side, being careful not to drill through to the outside. Attach the PCB standoffs to the cabinet using wood screws and spacers, snug but not too tight or the board may warp or crack. Be sure the board is not being flexed in any way.
Wire Harness
- If you are installing GOLDEN TEE '98 into a Dynamo cabinet with a preinstalled JAMMA harness, you will notice that it does not have a wire for the test switch. You will have to add a contact to the edge connector at the proper position (position 15). Some cabinets (Dynamo included) have only one coin switch input and the coin switches are wired together. Connect the designated wires to the coin switches separately.
- Attach the wire harness connector to the PCB. Be sure it is mounted correctly.
Make sure you have identified PIN 1 on the connector before powering up. Plugging the JAMMA connector in backwards will cause damage to the PCB.
- It is best to use connectors (not supplied) whenever joining a set of harness wires to a subassembly. If you choose to solder wires together, follow this procedure:
e — Strip off about 4" of insulation from the wire.
¢ — Slide a piece of heat-shrink tubing over the end.
© Do not leave a lot of excess wire spooled up in your cabinet. Cut the wires to the length you need plus a few extra inches. Leave enough for proper cable dressing. Do not make it stretch across the inside of the cabinet.
- Solder the new wire to the original wire. Use a straight in-line splice.
Power Wires
- Connect the wires that are designated for your power supply. You will need a supply of +5 vdc, and +12 vde. The +5 vdc must be regulated to within 5% (+ or - 0.25). The +12 vde may be unregulated but should not stray too far or the sound may be affected. If the cabinet's supply does not provide these voltages, it will have to be replaced. A switching-type supply is recommended,
- You will notice that you have more than one wire for each voltage. Use all wires supplied on the harness. This will ensure better power transmission and prevent overloading of the edge connector pads.
- Tin all power supply wires before connecting them to the power supply. Loose strands may short out the supply. For best results, connect spade lugs to the ends of the power wires and attach to the screw terminals of the power supply.
Monitor Wires
You will be connecting the RED, GREEN, and BLUE video drives along with the composite SYNC and video GROUND wires.
Speaker Wires
Connect the speaker wires paying attention to their polarity.
If your cabinet has two speakers, connect both. If they are 8 or 16 ohm speakers, connect them in parallel, if they are 4 ohm, connect them in series.
Position speakers as far from the monitor as possible. If placed too close, the speaker's magnet may deflect the monitor and cause strange coloration, which can usually be corrected by degaussing the monitor. Make sure everything else in the cabinet is attached securely for the same reason.
SYNC
This is the recommended approach for a Wells- Gardener monitor and should work with some others as well.
If your monitor does not have a composite SYNC input but has separate horizontal and vertical SYNC inputs, try connecting the composite SYNC signal from the PCB to the negative horizontal SYNC signal on the monitor. This should produce a satisfactory result, although some adjustment of the monitor's SYNC controls may be necessary.
Golden Tee Golf "98 - 8
Coin Doors, Test Switch, Service Button, and Volume Control Panel
- Wire the coin doors and the test / service switch(es) as per the JAMMA Harness Connection and Cabinet Schematic table on page 34.
- Connect the door lamps to the +12 vdc supply. Some games have separate power supply outputs for the lamps.
- Install a test switch somewhere convenient inside the coin door area. This switch allows you to enter adjustables, run diagnostics, and see or clear audits. Make it readily accessible through the coin door. Wire it to the Test wire on the JAMMA Harness.
4, Install a service switch (not included) somewhere convenient inside the coin door area. This switch allows you to give credits to players without affecting the game's credit audits or coin meters. Example: A player puts in a coin and gets no credit, the operator can then push the service button and a credit is given to the player without affecting the game's audits and coin meter.
- GOLDEN TEE '98 has the ability to adjust volume at any time during a game. Install two push button switches (not included) inside the coin door for easy access. Connect the switches to the JAMMA. harness. Refer to the JAMMA Harness Connection and Cabinet Schematic table on page 34.
- GOLDEN TEE '98 is also capable of running a Mars Light or other external signal, which will be activated if the game is running a special Hole-In- One contest.
Mars Light Hookup (opt
Equipment required A MARS light police beacon and a 3 amp 120 volt AC solid state relay with a 2.5 to 8 volt control line.
- Connect a wire from PIN 2 of the sound boards ticket connector to the positive control line of the relay.
- Connect a wire from PIN 3 of the sound boards ticket connector to the negative control line of the relay.
- The hot AC line in should connect to one side of the light and the return should connect to the AC input of the relay.
9 - Golden Tee Golf ‘98 F
1. From the AC output of the relay, connect a wire to the other side of the light.
The Hole-In-One contest is turned ON in the Operator Adjustables in order for the light to activate when a hole-in-one is made.
Mars Light will only work for sound PROMS: 1.0 and above.
inal Check
Check the game inside and out for any imperfections. Secure any loose wiring or fastening hardware.
Make sure the coin door is tight and the coin mechs are well adjusted.
Make sure all assemblies are firmly attached. Anything that is not mounted securely will rattle when the game is played. This game makes use of low-frequency sounds which can cause any loose joints to rattle.
LED Sign (tournament Version Only)
The LED message sign is folded back for safe shipping purposes. Before you start your game, lift the LED sign forward until it is in an upright position. Make sure the cables connecting the sign to the cabinet do not get caught or pinched in the access hole. Attach the metal support brackets, found inside the cash box, to the back of the sign and cabinet. This bracket will prohibit the sign from falling backward. Make sure to orient the bracket so the V-shaped notch lines up with the hinge on the bottom of the sign box. Use the supplied short screws to attach the top of the bracket to the sign box. Use the longer screws to attach the bracket to the cabinet .
3 Connecting The Phone Line
(Tournament Version Only)
In order for your game to join the tournament, you must connect the game to a regular telephone line. The ITS requires a regular phone line that gives a dial tone. Phone systems that are not direct outside lines may not work, Set up your ITS-compatible Golden Tee '98 Golf cabinet as you would any other video game. Be sure the LED sign and modem are properly connected to the PCB and the modem is on. Use the illustrations on the next page to verify proper connections.
Make sure the supplied, long, round telephone cable is plugged into the phone jack marked LINE on the modem. Thread the other end of the cable through the mouse hole below the back door. Be sure to loop the cable through the cable clip for extra strain relief.
Connect the end of the long cable into any existing telephone jack. Use the included splitter if you are connecting to a jack already in use. If no jack is available, you will need to install a phone jack, preferably near the cabinet.
Turn on the game cabinet and watch the Attract mode. The game will automatically attempt an initialization call. Pay attention to the various screen messages. and listen carefully to the modem for a dial tone, dialing sounds and the modem connect sound as the game makes its call.
Automatic installation is complete when the screen displays a SUCCESSFUL message. If an unsuccessful message appears, enter Test Mode by pressing the button inside the coin door. A second attempt to call will begin when you exit Test Mode by pressing the START button. If your first few attempts to call are unsuccessful, check the Troubleshooting section in this manual.
After your successful phone call, the game is now connected to the Tournament System and ready for public play! Tournament information will appear on the LED sign and promotional materials will be sent from the ITS, for display at each location.
Golden Tee Golf ’98 - 10
Node Connections
If you are planning to place more than one tournament game in a location, you may want to connect them together so all of the ITS machines share the same phone line. Follow the directions below to correctly daisy-chain your tournament cabinets together.
ITS games can be connected together and share one phone line. All of your game cabinets will require operating modems. Connect the first game cabinet up to the phone line following the directions listed under 3 Connecting The Phone Line (Tournament Version Only)
on page 10.
From the first cabinet, connect the long round telephone cable, supplied with the game, to the jack on the modem marked PHONE. Connect the other end of this cable into the modem of the next cabinet in line. The cable connects to the jack marked LINE on the modem. If a third cabinet is to be connected, attach another telephone cable to the PHONE jack from the second machine and connect the other end to the LINE jack on the third machine. Repeat this sequence until all of your tournament machines are daisy-chained together.
All ITS-compatible games will have the ability to be connected together in a location. Even if each machine is a different game running a different tournament, only one phone line will be necessary for all of the data to be transferred.
Because the node connection is a daisy chain, it is very important that all connected units be in operation. If one of the nodes is turned off or out of service, the nodes connected after that machine will not transfer their data.
11 - Golden Tee Golf ‘98 Phone Connections
Connecting to the PCB
Trackball Connectors Unused (CHANNEL 8} From LED Sign {Printed Circuit Board) (sion
Connecting to the Modem
To Phone Outtet
Connecting to the Wall Reguiar — Supsphied Dual Telephone ‘Spbiteer Wat Outlet pit Needed)
y
From Madem
4 Initial Power-Up
- Connect the JAMMA Harness.
Make sure the harness is plugged in correctly. Damage to the PCB will occur if the JAMMA connector is plugged in wrong.
- Connect the supplied phone cable to a phone jack. (Tournament Version Only)
- Plug in the game and turn it ON.
- Look and smell for smoke (TURN IT OFF IMMEDIATELY IF ANY IS NOTICED).
Use the Voltage Adjust Test on page 26 to adjust your power supply. The ideal reading should be 5.2 volts on the circuit board. This is very important for your game to perform correctly. The voltage should be checked and adjusted regularly for best game performance.
- Make sure the LED's on the PCB are flashing. If not, something is wrong, turn off the game.
- Listen for sound. Sounds should be heard in the attract mode.
- How is the picture? Is it centered? Is it too bright? Is itin focus? Adjust your monitor to get the best picture possible.
Check your monitor manual to make adjustments. Some test patterns are available through the game's system tests by pressing the Test switch. Use them when making any adjustments. (See System Tests Menu on page 23. Proper monitor adjustment is very
Upon initial power-up, the game will initialize to factory default settings. These settings affect game elements such as number of credits per coin, difficulty settings, etc. The OPERATOR ADJUSTABLES MODE section will describe how to alter these settings and view the system audits or Tun system tests.
). If you wish to automatically run a series of system tests, hold down the START button when you power up the game cabinet. The game will automatically perform the FAST GROM, VIDEO & PALETTE RAM and sound tests, and end on the player control test screen. This is a good, quick way to check the integrity of your PCB.
5 Dip Switch Settings
The SW1-Dip switches can be found on the main PCB near the JAMMA connector.
Dip switch 4 (ON): Always ON" (oEFAULT) Dip switch 4 (OFF): *** NOT USED *** Dip switch 3 (ON): Normal Mode (DEFAULT Dip switch 3 (OFF): Cocktail Mode Dip switch 2 (ON): One Trackball (DEFAULT) Dip switch 2 (OFF): Two Trackballs (cocktail version) Dip switch 1 (ON): Normal Game Play (DEFAULT) Dip switch 1 (OFF): Operator Mode Menu
There are also SW2-Dip switches near the flashing green LED. Switches #1 and #2 must be "ON" and switches #3 and #4 should be "OFF"
For Cocktail tables, dip switches 2 and 3 must be set to OFF.
Golden Tee Golf ’98 - 12
6 Operator Mode
To enter the OPERATOR MODE MENU, press the Test Button, located just inside the coin door. When the Test Button is pressed or SW1-DIP Switch | is flipped to the "OFF" position, the screen displays the OPERATOR MODE MENU.
If you used SW1-DIP switch 1 to enter the OPERATOR MODE MENU, you will need to flip SW1-DIP switch 1 back to the ON position in order to return to the game.
When in OPERATOR MODE, the game's software version and ITS 1D Number are always displayed at the top of each screen.
Golden Tee '98 GolfV1.00 1D 00000001
TRACKBALL UP TO MOVE UP ‘TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
OPERATOR MODE MENU
exit
VOLUME SETTINGS
ITS COLLECTION REPORT AS DOLLARS(*)
ITS COLLECTION REPORT AS COINS(*)
OPERATOR ADJUSTABLES MENU
GAME AUDITS MENU
TOURNAMENT MENU(*)
LEADERBOARD MENU
SYSTEM TESTS MENU
OPERATOR MODE MENT
The OPERATOR MODE MENU allows you to enter into several different areas:
VOLUME SETTINGS is used to adjust the volume of your game for your location.
ITS COLLECTION REPORT AS DOLLARS displays the current tournament coin audits, for use in separation of ITS fees from your collections. In this setting the audits are displayed in US dollars.
ITS COLLECTION REPORT AS COINS displays the current tournament coin audits, for use in separation of ITS fees from your collections. In this setting, the audits are displayed in total number of coins.
13 - Golden Tee Golf ‘98 OPERATOR ADJUSTABLES is used for customizing your game for your location. Some of the features in Operator Adjustables are number of coins per game, sounds on or off when no one is playing, difficulty settings, etc. These do not effect tournament play.
GAME AUDITS allows you to check your game's overall earnings, game times, game scores, etc. The Audits can be reset through this menu as well.
TOURNAMENT MENU offers adjustables and settings for low-level tournaments settings.
LEADERBOARD MENU allows you to view the top scores on the Leaderboard for each golf course. For Regular play only.
SYSTEM TESTS verifies the operation of the hardware, controls, and monitor through easy and automatic procedures accessed through these menus.
Menu items can be highlighted rolling the trackball Up or Down. The FACE LEFT and FACE RIGHT buttons highlight menu items as well. To select a highlighted item, press the START button.
To exit any of these tests and return the game to its normal state, use the trackball or FACE LEFT and FACE RIGHT buttons to highlight the line that says EXIT, and press the START button.
COLOR KEY NOTE:
For easy identification, all test screens have
been color coded. Items displayed in GREEN are the Menu titles. This is the name of the menu that is currently displayed. Items appearing in YELLOW are the menu's instructions. The BLUE items are choices available in this menu. The WHITE item is the selection that is currently highlighted. If RED is
ever displayed, there is a problem with that
item and it should be corrected.
The Volume Settings screen is used to adjust the sounds that are heard during game play.
TO EXIT PRESS START
MOVE TRACKBALL RIGHT TO INCREASE VOLUME MOVE TRACKBALL LEFT TO DECREASE VOLUME
VOLUME SETTINGS SCREEN
When this screen appears, music will play. Move the trackball to the right to increase the game's sounds and music. Rolling the trackball to the left will make the game sounds softer. When you have adjusted the sounds to the appropriate volume, press the START button to exit back to the main menu.
Your cabinet also comes equipped with volume increase/decrease push buttons, located inside the coin door.
ITS Collection Report As Dollars
(Tournament Version Only)
Use this screen to assist in collections during tournaments.
Golden Tee ‘98 GoifV1.00 1D 00000001 | rACKBALL UPTO MOVE UP TRACKBALL DOWN TO MOVE DOWN, PRESS START TO CHOOSE
ITS COLLECTION REPORT AS DOLLARS
EXIT REPORT
RESET COLLECTION COUNTS
TOTAL DOLLARS
ITS PORTION
OPERATOR/LOCATION
ITS COL ION REPORT AS DOLLARS SCREEN
RESET COLLECTION COUNTS is used to erase all of the collection counts stored in memory. TOTAL DOLLARS displays the total number of dollars on both the tournament and regular games, since these audits were last reset.
ITS PORTION displays the number of valid tournament games on your machine, times the ITS fee. Separate this amount from your collection before you make your split. Deposit this amount into your debit account on a timely basis, to ensure proper funds.
OPERATOR/LOCATION displays the total dollars collected, minus the ITS portion. This is the amount of your collection that you may split with your location.
ITS Collection Report As Coins (Tournament Version Only)
Use this screen to assist in collections during tournaments.
Golden Tee '98 GolfV1.00 1D 00000001 TRACKBALL UP TO MOVE UP ‘TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
ITS COLLECTION REPORT AS COINS
EXIT REPORT
TOTAL COINS
ITS PORTION
OPERATOR/LOCATION
ITS COLLECTION REPORT AS COINS SCREEN
TOTAL COINS displays the total number of coins on both the tournament and regular games, since these audits were last reset.
ITS PORTION displays the number of valid tournament games on your machine, times the ITS fee. Separate this amount from your collection before you make your split. Deposit this amount into your debit account, to ensure proper funds.
OPERATOR/LOCATION displays the total coins collected, minus the ITS portion. This is the amount of your collection that you may split with your location.
This collection report is exactly the same as COLLECTION REPORT AS DOLLARS, except that the earings are represented as a total coin count rather than a dollar value
Golden Tee Golf °98 - 14
The OPERATOR ADJUSTABLE MENU is accessed through the OPERATOR MODE MENU.
Golden Tee '98 GolfV1.00 1D 00000001
TRACKBALL UP TO MOVE UP TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
OPERATOR ADJUSTABLES MENU
EXIT ADJUSTABLES:
GAME MODE SELECTION
GAME RESETS
ATTRACT MODE SOUNDS
CREDITS AND COIN DOOR SETTINGS
DELAY TIME ADJUSTMENT
COIN DOOR PROTECTION MENU
SKILL LEVEL ADJUSTMENT
HOLE IN ONE CONTEST MODE
OPERATOR ADIUSTABLES MENU SCREEN
There are many customizing procedures that you can control. Below is a brief description of each adjustable function and what the screen looks like when displayed. Remember, to select an item from any menu, use the trackball to highlight the item in purple, and then press the START button.
This menu allows you to place the game in standard COIN MODE, or choose FREE PLAY.
Golden Tee '98 Goltv1.00 1D 00000001
TRACKBALL UP TO MOVE UP ‘TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
GAME MODE SELECTION
COIN MODE
FREE PLAY
GAME MODE SELECTION SCREEN
In COIN MODE, the game will only work if coins are deposited into the game.
In FREE PLAY, coins are not needed for play, and the START button is always active.
If FREE PLAY is set to ON when a tournament is in progress, your machine will not allow tournament play.
15 - Golden Tee Golf ‘98 Game Resets
The GAME RESETS menu will cancel or zero out any custom features or bookkeeping figures that are no longer wanted.
Golden Tee '98 GolfV1.00 1D 00000001
‘TRACKBALL UP TO MOVE UP ‘TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
GAME RESETS
EXIT RESETS
RESET ALL TO FACTORY SETTINGS
RESET HIGH SCORES ONLY
RESET AUDITS ONLY
GAME RESETS MENU SCREEN
RESET ALL TO FACTORY SETTINGS will change the game back to the way the game was preset when new. Any custom features such as Free Play and Skill Levels will be changed back to the original settings set at the factory.
RESET HIGH SCORES ONLY is used to erase all of
the high scores stored in memory.
RESET AUDITS ONLY is used when all of your bookkeeping and statistics have been gathered from the Audits section, and are no longer needed. If you like to gather all of your accounting information each week, or after each collection, it is a good practice to reset all of the audits so your coin count will match the audit
information.
ode Sounds Attract
This menu is used to adjust the sounds that are heard while no one is playing the game.
Golden Tee '98 Golfv1.00 1D 00000001
TRACKBALL UP TO MOVE UP TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
ATTRACT MODE SOUNDS
ALL ATTRACT MODE SOUNDS ON
OCCASIONAL ATTRACT MODE SOUNDS
ALL ATTRACT MODE SOUNDS OFF
ATTRACT MODE SOUNDS MENU SCREEN
ALL ATTRACT MODE SOUNDS ON will play sounds during every attract cycle.
OCCASIONAL ATTRACT MODE SOUNDS plays sounds about every ten to twelve times the attract mode is repeated.
ALL ATTRACT MODE SOUNDS OFF will not allow any sounds to be played during the attract mode.
Cre nd Coin Door Settings
This menu allows you to change the number of coins needed to play GOLDEN TEE 3-D GOLF.
Golden Tee 98 GoifV1.00 1D 00000001
‘TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE.
CREDITS AND COIN DOOR SETTINGS
EXIT CREDITS AND COIN DOOR SETTINGS
DOOR 1 COIN VALUE
DOOR 2 COIN VALUE
DOOR 3 COIN VALUE
COINS NEEDED FOR ONE CREDIT
HOLES PLAYED PER CREDIT
COINS NEEDED TO PLAY 18 HOLES
‘TO CHANGE VALUES MOVE TRACKBALL LEFT TO DECREASE MOVE TRACKBALL RIGHT TO INCREASE
CREDIT AND COIN DOOR SETTING SCREEN
You can set each door to different coin values by highlighting DOOR 1 COIN VALUE for coin door 1, DOOR 2 COIN VALUE for coin door 2, etc.. Moving Trackball left or right will change the number of credits that each coin represents.
COINS NEEDED FOR ONE CREDIT..... To award a game credit, the player will need to insert an adjustable number of coins.
HOLES PLAYED PER CREDIT..... This defines the number of holes the player is given for each credit. This value can range from | to 3 holes.
COINS NEEDED TO PLAY 18 HOLES..... To play an entire 18 holes at a reduced cost to the player, you can set this value to something less than the cost of buying holes as described above. The default is 10 coins for 18 holes. This is a savings of 2 coins, at a rate of 2 coins for 3 holes. The player will need to insert all 10 coins at the start of a game to take advantage of this discount feature. Delay Time Ad
This allows for changing the delay of game time.
Golden Tee 98 GolfV1.00 1D 00000001
‘TRACKBALL UP TO MOVE UP ‘TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
DELAY TIME ADJUSTMENT
EXIT DELAY TIME ADJUSTMENT
DELAY OF GAME TIMEOUT
DELAY OF GAME TIMEOUT
TO CHANGE VALUES MOVE TRACKBALL LEFT TO DECREASE MOVE TRACKBALL RIGHT TO INCREASE
BUTTON CONFIGURATIONS SCREEN
DELAY OF GAME TIMEOUT (1) ..... The game will give the player a penalty stroke if they have not swung the club after this amount of time.
DELAY OF GAME TIMEOUT (2) ... The TIMEOUT can be disabled by selecting "OFF" - We recommend leaving this "ON" so the game will return to the attract mode if a player walks away from a game in progress.
| Level Adjustment
Golden Tee '98 Golf allows for changing the level of skill needed to play the game. This feature is good for locations with younger or novice players who are less skilled at the game, or expert or accomplished players who demand a greater challenge.
The skill level adjustment will only affect regular play. Skill level on all Tournament games is controlled by the ITS, so every machine plays the same.
Golden Tee '98 GolfV1.00 1D 00000001 TRACKBALL UP TO MOVE UP TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
| SKILL LEVEL ADJUSTMENT
| SKILL LEVEL 1 - EASIEST SKILL LEVEL 2
SKILL LEVEL 3
SKILLLEVEL 4
SKILL LEVEL 5 - HARDEST
SKILL LEVEL ADJUSTMENT SCREEN
Golden Tee Golf ’98 - 16
To set the game to an easy skill level, highlight... SKILL LEVEL 1 - EASIEST.
To set the game to a difficult skill level, highlight... SKILL LEVEL 5 - HARDEST.
SKILL LEVEL 2, SKILL LEVEL 3, and SKILL LEVEL 4 are settings between the easiest and hardest levels. Sometimes it is best if the skill level is adjusted gradually over a period of time.
This menu will not affect tournament play. The skill level of each tournament is set by the ITS and is the same on every tournament machine.
Hole In One Contest Mode
The HOLE IN ONE CONTEST MODE can be used if you or your location wants to give away prizes for a hole-in-one during regular play.
PRESS START TO CHOOSE
HOLE IN ONE CONTEST MODE
NO HOLE IN ONE CONTEST
HOLE IN ONE CONTEST- WIN IMMEDIATELY
HOLE IN ONE CONTEST- QUALIFY TO WIN
HOLE IN ONE CON
Setting the HOLE-IN-ONE CONTEST "ON" will cause a loud siren and fanfare to go off if a hole-in-one is made. The hole-in-one message can be altered depending on your type of contest.
HOLE IN ONE CONTEST - WIN IMMEDIATELY will display a "YOU HAVE WON" message.
HOLE IN ONE CONTEST - QUALIFY TO WIN will display a "YOU HAVE QUALIFIED" message.
This feature will only work in regular play. Hole-inones are handled differently during tournament play.
Unless you are running your own special contest, apart from ITS Tournaments, this setting should remain OFF. Players and locations can become confused when this message appears during Regular Play, especially while a Tournament is in progress.
17 - Golden Tee Golf ‘98 Gain Door Protection Menu
Golden Tee ‘98 Golf v1.00 1D 00000001
TRACKBALL UP TO MOVE UP TRACKBALL DOWN TO MOVE DOWN
COIN DOOR PROTECTION MENU
EXIT COIN DOOR PROTECTION
COIN DOOR PROTECTION YES/NO
MAXIMUM PULSE WIDTH COUNT 00
GOOD COIN CLEAR COUNT 00
RESET COIN DOOR ALARM COUNT
COIN DOOR 1 ALARM COUNT
COIN DOOR 2 ALARM COUNT
COIN DOOR 3 ALARM COUNT
TO CHANGE VALUES MOVE TRACKBALL LEFT TO DECREASE MOVE TRACKBALL RIGHT TO INCREASE
COIN DOOR PROTECTION MENU
COIN DOOR PROTECTION is implemented by monitoring the coin switch pulse width. A pulse longer than the MAXIMUM COUNT sets the game alarm counter. Each count represents about 4 milliseconds.
If two game alarms occur then the game halts and displays a coin failure message. Any unused credits in the game are cleared.
A count of good coin drops is kept and each time the GOOD COIN COUNT is reached the game alarm counter is cleared. This allows an occasional coin switch glitch to be tolerated.
A count of all switch alarms for each coin door is also kept. These counters can be cleared by selecting RESET COIN DOOR ALARM COUNTS and RESET COIN SWITCH COUNTS.
Coin mechanisms and bill acceptors vary widely. Test your game thoroughly with the coin protection ON to make sure the software is compatible with your hardware.
The GAME AUDITS MENU will supply you with a detailed accounting of helpful and informative bookkeeping and statistics. It can be accessed through the OPERATOR MODE MENU.
Golden Tee ‘98 Golv1.00 {D 00000001
TRACKBALL UP TO MOVE UP TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
GAME AUDITS MENU
EXIT AUDITS
DISPLAY COIN AUDITS
DISPLAY GAME SELECTION AUDITS
NUMBER OF GOLFERS AND HOLES PLAYED
ARBOR HILL AUDITS
BAYOU BEND AUDITS
PALM GROVE AUDITS
RESET AUDITS
GAME AUDITS SCREEN
When you choose to review the coin audits, the Display Coin Audits screen will appear.
Golden Tee ‘98 GolfV1.00 1D 00000001
PRESS START TO EXIT
DISPLAY COIN AUDITS
COIN DOOR 1 COINS
COIN DOOR 2 COINS
COIN DOOR 3 COINS
TOTAL COINS
COINS TO ITS
‘TOURNAMENT GAMES PLAYED
REGULAR GAMES STARTED
SECONDS PER COIN
DISPLAY COIN AUDITS SCREEN This menu will show the audits for each game selection.
Golden Tee '98 GolfV1.00 1D 00000001
PRESS START TO EXIT
DISPLAY GAME SELECTION AUDITS
1OKE GAMES
‘SKINS GAMES
ARBOR HILL COURSE
BAYOU BEND
PALM GROVE
FORWARD ONLY STROKES
DISPLAY GAME SELECTION AUDITS SCREEN
ers and Holes Playe
This menu displays how many games were played by 1, r 4 players and how may holes were played during a game.
Golden Tee '98 GolfV1.00 1D 00000001
PRESS START TO EXIT
NUMBER OF GOLFERS AND HOLES PLAYED
TOTAL 1 GOLFER GAMES
TOTAL 2 GOLFER GAMES
TOTAL 3 GOLFER GAMES
TOTAL 4 GOLFER GAMES
TOTAL 1-8 HOLE GAMES
TOTAL 9-17 HOLE GAMES
TOTAL 18 HOLE GAMES
TOTAL FULL GAMES STARTED
NUMBER OF GOLFERS AND HOLES PLAYED SCREEN
Golden Tee Golf ’98 - 18
Arbor Hill Audits Paim Grove Audits
This menu will display the audits for the Palm Grove
course. This menu displays the audits for the Arbor Hill course.
EE Golden Tee '98 GolfV1.00 1D 00000001
Golden Tee 98 GolV1.00 1D 00000001 PRESS START TO EXIT
ARBOR HILL AUDITS
TOTAL GAMES PRESS START TO EXIT
PALM GROVE AUDITS
TOTAL HOLES PLAYED TOTAL GAMES
AVERAGE HOLES PER GAME TOTAL HOLES PLAYED
TOTAL STROKES AVERAGE HOLES PER GAME
TOTAL PUTTS
‘TOTAL WATER OR UNPLAYABLE BALLS
‘TOTAL OUT OF BOUNDS SHOTS
‘TOTAL DELAY OF GAMES
ARBOR HILL AUDIT
ou Bend Audits TOTAL STROKES
TOTAL PUTTS
TOTAL WATER OR UNPLAYABLE BALLS
‘TOTAL OUT OF BOUNDS SHOTS
TOTAL DELAY OF GAMES
PALM GROVE AUDITS SCREEN
Display Hardware Audits This menu displays the audits for the Bayou Bend Audits course. This screen displays various voltage readings that your
Golden Tee 98 GolfV1.00 1D 00000001
PRESS START TO EXIT
BAYOU BEND AUDITS
TOTAL GAMES,
TOTAL HOLES PLAYED
AVERAGE HOLES PER GAME
TOTAL STROKES
TOTAL PUTTS
‘TOTAL WATER OR UNPLAYABLE BALLS
‘TOTAL OUT OF BOUNDS SHOTS
TOTAL DELAY OF GAMES:
BAYOU BEND AUDITS SCR
19 - Golden Tee Golf ‘98 PCB is at during initial power up and play of the game.
Golden Tee '98 GolfV1.00 1D 00000001
PRESS START TO EXIT
DISPLAY HARDWARE AUDITS
POWER ON POWERUPS
RESET POWERUPS
VOLTAGE OK POWERUPS
VOLTAGE LOW POWERUPS
VOLTAGE HIGH POWERUPS
VOLTAGE OK GAMES
VOLTAGE LOW GAMES
VOLTAGE HIGH GAMES
DISPLAY HARDWARE AUDITS SCREEN
Reset Audits
This menu will reset your audits.
Golden Tee '98 GolfV1.00 10 00000001
TRACKBALL UP TO MOVE UP TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
RESET AUDITS
NO RESET AUDITS
RESET AUDITS
RESET AUDITS SCREEN
If you wish to set all of the game audits (described above) back to zero, highlight RESET AUDITS from this menu and press the START button. The screen will briefly display AUDIT RESET. Be careful, because once you have reset the Audits, the data is lost forever.
If you change your mind and decide not to reset the audits to zero, highlight NO RESET AUDITS and you will exit this screen without making any changes.
Tournament Menu (Tournament Version Only)
Golden Tee ‘98 GolfV1.00 ID 00000001
TOURNAMENT MENU
EXIT TOURNAMENT
TOURNAMENT OPERATOR ADJUSTABLES
DISPLAY TOURNAMENT AUDITS
DISPLAY HARDWARE AUDITS
DISPLAY TIMERS
TOURNAMENT MENU SCREEN
Select TOURNAMENT OPERATOR ADJUSTABLES to enter into a menu of tournament settings and options. Most of these settings will not be necessary for normal tournament access and phone connections, and should be left at the factory settings as shown on the screen displayed on page 21.
DISPLAY TOURNAMENT AUDITS displays detailed tournament audits on the tournament games played on the machine. Most of these audits are not necessary for routine information and collection purposes. This information may be used to help determine possible tampering or game problems. DISPLAY HARDWARE AUDITS displays the voltage readings for the PCB during initial power up of the game and during play of the game.
DISPLAY TIMERS displays time settings that your machine is currently using. These settings are set by the ITS via modem. It also displays game ID and serial numbers,
Most of these settings will not need to be changed for normal tournament access and phone connections in most locations. The settings should remain as shown in the screen display below.
Golden Tee '98 GoltV1.00 1D 00000001
TOURNAMENT OPERATORS ADJUSTABLES:
EXIT ADJUSTABLES.
FORCE TOURNAMENT UPLOAD
OUTSIDE LINE ACCESS NUMBER
OUTSIDE LINE ACCESS DELAY
ROTARY DIAL PHONE LINE
MODEM CONNECT TIMEOUT
DISPLAY UPLOAD DIAGNOSTICS YES/NO
DISABLE ITS AC YES/NO
DISABLE MODEM CONNECTION YES/NO
TOURNAMENT OPERATOR ADJUSTABLES MEN
FORCE TOURNAMENT UPLOAD may be used if you need to force a phone call to the ITS. To force a call, highlight FORCE TOURNAMENT UPLOAD using the trackball. Then move the trackball to the right to display YES. When you exit out of Test Mode, the game will automatically make a phone call attempt. If the call is successful, this setting will default back to NO. If the call is not successful, the game will continue to call periodically until a successful call is made.
Some phone systems or companies may require an initial prefix, such as "9", before dialing. Highlight OUTSIDE LINE ACCESS NUMBER to select your desired prefix. Moving the trackball left or right will increase or decrease the number. When the desired number is displayed, press the START button. Zero means no prefix is used.
Golden Tee Golf ’98 - 20
Some phone systems or companies may require a delay before dialing in order to connect to a dial tone. Highlight OUTSIDE LINE ACCESS DELAY and move the trackball left or right to select the desired delay. The number represents seconds. When the desired delay time is displayed, press the START button. The default delay is 2.
Some older locations may still use rotary, or pulse phone systems. You can change the game to accept rotary phone lines by highlighting ROTARY DIAL PHONE LINE and then moving the trackball to the right to change the setting to YES. If your location uses the more common tone lines, make sure this setting is set to NO.
MODEM CONNECT TIMEOUT is used to adjust the amount of time the modem remains on line in order to complete a phone call. If you notice your game timing out before a connected call is completed, you may wish to increase this setting, to allow for longer connect time. The default setting is 1:30.
DISPLAY UPLOAD DIAGNOSTICS will display debugging code on the screen during a phone call. This setting should remain on NO.
DISABLE ITS ACCESS will completely disable the game from trying to make a call. To avoid losing your tournament capability, this setting should remain on NO.
DISABLE MODEM CONNECTION is used at the factory during production and should remain on NO.
21 - Golden Tee Golf ‘98 udits Display Tournament
This screen shows a detailed history of tournament activity on your machine. Normally, you will not need to access this screen. These audits can not be reset by the operator. At the start of each tournament, this audits screen is reset to zero by the ITS. You can use this screen to verify your total ITS collections, and verify any power loss or reset claims by players.
Golden Tee '98 GolfV1.00
DISPLAY TOURNAMENT AUDITS
TOTAL GAMES STARTED
TOTAL GAMES COMPLETED
TOTAL GAMES PLAYER QUIT
TOTAL GAMES TIMED OUT
TOTAL GAMES POWER LOSS
TOTAL GAMES RESET LOSS
TOTAL GAMES BELOW CUTOFF
TOTAL NAMES ENTERED
TOTAL NAMES DROPPED
TOTAL NAMES POWER LOSS
TOTAL NAMES RESET LOSS
TOTAL ITS GAMES BILLED
TOTAL ITS COIN
DISPLAY TOURNAMENT AUDITS SCREEN
Display Timers
This screen displays various time settings that your machine is currently using. These settings are set by the ITS via modem.
Golden Tee '98 Golfv1.00 ID 00000001 | DISPLAY TIMERS
ITS TIME YY-MM-DD HHMM:SS
LOCAL TIME Y¥:MM:DD HHMM:SS.
TOURNAMENT START TIME YYIMM:DD HH:MM:SS
TOURNAMENT END TIME Y¥:MM:DD HH:MM:SS
SPECIALS START YY:MM:DD HHMM:SS
SPECIALS END YY:MM:DD HHMM:SS
YY:MM:DD HH:MM:SS CALLIN TIME FIRST TRY TIME YY:MM:DD HH:MM:SS
NEXT TRY TIME YY:MM:DD HH:MM:SS
CALLIN ATTEMPTS xXx
GAME ID (00000001
BOARD SN ‘00000001
DISPLAY TIMERS SCREEN
ITS TIME is the current time read by the real time clock on the PCB using Greenwich Mean Time minus 12 hours.
LOCAL TIME is the current time in your time zone.
TOURNAMENT START TIME and END TIME show the current settings for the most current tournament.
SPECIALS START and END refers to any special contests during a tournament such as a Hole-in-One contest over a weekend.
CALL IN TIME is the approximate time that your machine calls in to the ITS,
FIRST TIME TRY and NEXT TIME TRY show when your game began calling the ITS and when it will try again. These times will only show if a first attempt at a call was unsuccessful.
CALL IN ATTEMPTS shows the number of unsuccessful phone calls, if any.
GAME ID NUMBER should match the ITS number on your game cabinet. If this number does not match your game cabinet, call Incredible Technologies service department immediately, as this problem will hinder tournament play.
PCB SERIAL NUMBER should match the AAMA sticker on your PCB. If this number does not match your PCB, call Incredible Technologies service department immediately, as an incorrect number will hinder tournament play.
Your programmed Game ID Number and AAMA PCB serial number appear on this screen. Use this information to verify that they are the same as the stickers on your cabinet and PCB. If these numbers do not match, you will not receive correct tournament data. Contact Incredible Technologies immediately. The factory default for Golden Tee '98 displays pre-set initials and scores on the leaderboard, which allows for a sense of competition and improvement to the player. If you are going to run your own league or tournaments, you may wish to delete these placeholders so only real players are displayed on the leaderboard.
Golden Tee '98 GolfV1.00 1D 00000001
TRACKBALL UP TO MOVE UP ‘TRACKBALL DOWN TO MOVE DOWN
PRESS START TO CHOOSE
LEADERBOARD MENU
EXIT LEADERBOARD MENU
DISPLAY LEADERBOARD MENU,
CLEAR LEADERBOARD M
LEADERBOARD MENU
To view the various course leaderboards, highlight DISPLAY LEADER BOARD MENU.
To clear all of the scores and names in the various course leader boards, select CLEAR LEADER MENU.
Display Leaderboard Menu
Golden Tee '98 Goltv1.00 1D 00000001
TRACKBALL UP TO MOVE UP TRACKBALL DOWN TO MOVE DOWN
EXIT LEADERBOARD MENU
DISPLAY ARBOR HILL LEADERBOARD MENU
DISPLAY BAYOU BEND LEADERBOARD MENU
| DISPLAY PALM GROVE LEADERBOARD MENU
DISPLAY LEADERBAORD MENT
Select the course you wish to look at, and press the START button. The screen will stay on until you press START again to exit. You can use this information to determine your tournament or league winners. Great shot points have been included on this screen for use as tie breakers.
Great Shot Points are not displayed during the game, so players may not be aware of their Great Shot Point total.
Golden Tee Golf 798 - 22 on
Clear Leaderboard Menu
Golden Tee '98 GoifV1.00 ID 00000001
TRACKBALL UP TO MOVE UP ‘TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
CLEAR LEADERBOARD MENU
CLEAR ARBOR HILL LEADERBOARD MENU
CLEAR BAYOU BEND LEADERBOARD MENU
CLEAR PALM GROVE LEADERBOARD MENU
CLEAR LEADERBOARD MEN
When selecting an in-house tournament, you should clear all of the names and scores from the course you wish to play on. Highlight the course Leaderboard and press START. All of the initials and scores will be cleared, and the Leaderboard will be empty. Players who complete an 18 hole course on the cleared course will have their statistics saved on the Leaderboard until
it is cleared again.
Golden Tee '98 Golf has been inspected and tested at the factory, and most likely the game will be in perfect working order when you plug it in. If you are experiencing any problems with the game, the System Tests Menu is a good place to start when tracking down the problem. The System Tests MENU can be found in the OPERATOR MODE MENU by pressing the test switch located just inside the coin door of the cabinet, or set DIP Switch 1 on the Main PCB to the OFF position.
Golden Tee '98 GoifV1.00 1D 00000001
‘TRACKBALL UP TO MO\ E UP ‘TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
SYSTEM TESTS MENU
EXIT TESTS
VIDEO SCREEN TESTS
FULL GROM CHECKSUM TEST
FAST GROM CHECKSUM TEST
VIDEO RAM TEST
PALETTE RAM
BOARD TESTS
SOUND TEST
PLAYER CONTROLS TEST
VOLTAGE ADJUST TEST
SIGN TEST
SERIAL PORT TEST
SYSTEM TESTS MENU
23 - Golden Tee Golf ‘98 Video Screen Test
You can test your monitor and adjust colors by choosing VIDEO SCREEN TESTS and pressing the START button.
Golden Tee '98 Golfv1.00 1D 00000001 VIDEO SCREEN TEST
TO VIEW VIDEO TEST SCREENS FACE LEFT OR RIGHT BUTTONS START AT ANY SCREEN TO EXIT
FOLLOWING SCREENS ARE AVAILABLE
COLOR ADJUSTMENT
SCREEN GRID PATTERN
RED SCREEN
GREEN SCREEI
BLUE SCREEN i}
WHITE SCREEN | __J
VIDEO SCREE! TEST SCREEN
When the FACE LEFT or FACE RIGHT buttons are pressed, the screen changes to display a grid of colored rectangles. Use these colors as a guide and adjust your monitor so they look as good as possible. This test can be exited at any time by pressing the START button.
Full GROM Checksum Test
Choose Full GROM Checksum Test from the System Test Menu to test the Graphics chips on the PCB. This test performs a complete test of the Graphics ROM's. While the test is in progress the following message is displayed:
FULL GROM CHECKSUM TEST - 15 SEC TO FINISH
FULL GROM CHECKSUM TES (Test Is Progress) F SCREEN
When the test is completed the GROM Test Screen is displayed.
Golden Tee ‘98 GolfV1.00
FULL GROM CHECKSUM TEST
GROM CHECKSUMSTATGROM — CHECKSUMSTAT
GRMA_0 X000XX GOOD GRMB_0 XXXXxX GOOD GRMA_1 XXXXXX GOOD GRMB_1 XXXXXX GOOD GRMA_2 XXXXXX GOOD GRMB_2 XXXXXX GOOD GRMA_3 XXXXXX GOOD GRMB_3 XXXXXX GOOD
GRMC_0 XXXXXX GOOD PROM_0 XXXXXX GOOD GRMC_1 XXXXXX GOOD PROM_1 XXXXXX GOOD GRMC_2 XXXXXX GOOD PROM_2 XXXXXX GOOD GRMC_3 XXXXXX GOOD PROM_3 XXXXXX GOOD
FULL GROM CHECKSUM TEST: (PASSED or FAILED)
PRESS START BUTTON TO EXIT §S LEFT BUTTON TO LOOP TEST
FULL GROM CHECKSUM TEST SCREEN (Test Completed)
e If all checksums are shown in white, the test passed and your game is in good working order.
e — If any checksums are bad, they will be displayed in red text on this screen. This means that the GROM is defective and needs to be replaced. Call your distributor or the Incredible Technologies, Inc. Service Department for further help.
© To loop this test, press FACE LEFT button.
¢ = To exit this test, press the START button. Fast GROM Checksum Te
Choose FAST GROM CHECKSUM TEST from the SYSTEM TEST MENU to test the Graphics chips on the PCB. This test performs a complete test of the Graphics ROM's. While the test is in progress the following message is displayed:
FAST GROM CHECKS!
FAST GROM CHECKSUM TEST § : i
(Test In Progress) ;
When the test is completed the GROM Test Screen is displayed.
Golden Tee ‘98 GolfV1.00
FAST GROM CHECKSUM TEST
GRMA_O XXXXXX GOOD GRMB_O XXXXXX GOOD GRMA_1 XXXXXX GOOD GRMB_1 XXXXXX GOOD GRMA_2 XXXXXX GOOD GRMB_2 XXXXXX GOOD GRMA_3 XXXXXX GOOD GRMB_3 XXXXXX GOOD
GRMC_0 XXXXXX GOOD PROMO XXXXXX GOOD GRMC_1 XXXXXX GOOD PROM_1 XXXXXX GOOD GRMC_2 XXXXXX GOOD PROM_2 XXXXXX GOOD GRMC_3 XXXXXX GOOD PROM_3 XXXXXX GOOD
FULL GROM CHECKSUM TEST: (PASSED or FAILED)
PRESS START BUTTON TO EXIT PRESS LEFT BUTTON TO LOOP TEST
FAST GROM CHECKSUM TEST SCREEN (Lest Completed}
e If all checksums are shown in white, the test passed and your game is in good working order.
e If any checksums are bad, they will be displayed in red text on this screen. This means that the GROM is defective and needs to be replaced. Call your distributor or the Incredible Technologies, Inc. Service Department for further help.
© — To loop this test, press FACE LEFT button.
© Toexit this test, press the START button. g
Golden Tee Golf ’98 - 24
ere Mme, Video RAM Test
This test performs a complete test of the Graphics video RAM. The video RAM is tested in two pages. The following message will be displayed as each page is tested.
When the test is completed the results will be displayed as follows.
Golden Tee '98 GolfV1.00 10 00000001
VIDEO RAM TEST
VIDEO PLANE A PAGE 0 STATUS = 0000
VIDEO PLANE A PAGE 1 STATUS = 0000
VIDEO PLANE B PAGE 0 STATUS = 0000
VIDEO PLANE B PAGE 1 STATUS = 0000
32 GOOD U35 GOOD u30 GOOD ust GOOD
VIDEO RAM TEST [PASSED or FAILED]
PRESS START BUTTON TO EXIT
PRESS LEFT BUTTON TO LOOP TEST
VIDEO RAM TEST SCREEN
e — Ifthe game passes this test, zeros will be displayed in white along with a VIDEO RAM TEST PASSED message.
© — If the test fails, a non-zero status and VIDEO RAM TEST FAILED message will be displayed in red. Call your distributor or the Incredible Technologies, Inc. Service Department for further help.
¢ To loop this test, press the FACE LEFT button.
To exit this test, press the START button.
Golden Tee ‘98 GolfV1.00 ID 90000001
PALETTE RAM TEST
PALETTE RAM STATUS= 0000
RED GOOD GREEN GOOD BLUE GOOD
PALETTE RAM TEST (PASSED or FAILED)
PRESS START BUTTON TO EXIT
PALETTE RAM TEST SCREEN
25 - Golden Tee Golf ‘98 This test will perform all of the system's tests at one time.
PROGRAM MEMORY U45-U48 (GOOD or BAD)
PALETTE RAM TEST
RED GOOD GREEN GOOD BLUE GOOD
PALETTE RAM TEST (PASSED or FAILED)
VIDEO RAM TEST
32 GOOD U35 GOOD 30 GOOD _u31 GOOD
VIDEO RAM TEST [PASSED or FAILED]
GROM TEST GROM CHECKSUMSTATGROM — CHECKSUMSTAT GRMA_0 XXXXXX GOOD GAMB_0 XXXXXx GOOD GRMA_1 X000OK GOOD GAMB_1 Xxx GOOD GRMA_2 XXXXXX GOOD GRMB_2 XXXXxX GOOD GRMA_3 XXXXXX GOOD GRMB_3 XXXXXX GOOD
GRMC_0 XXXXXX GOOD PROM_0 %x000% GOOD GRMC_1 000K GOOD PROM_1 XXXxXX GOOD GRMG_2 XXXXXX GOOD PROM_2 XXXXXX GOOD GRMC_3 XXXXXX GOOD PROM.3 XXX GOOD
FAST GROM CHECKSUM TEST: (PASSED or FAILED)
111 BOARD TEST (PASSED or FAILED) !!1
PRESS START BUTTON TO EXIT
BOARD TESTS SCREEN
Choose SOUND TEST from the System Test Menu to test the sounds and speakers in the game. The sound section also controls the coin meter, and you can test it from this section as well.
Golden Tee ‘98 GoifV1.00 1D 00000001
TRACKBALL UP TO MOVE UP TRACKBALL DOWN TO MOVE DOWN PRESS START TO CHOOSE
SOUND TESTS
EXIT SOUND TESTS.
COIN METER TEST
TEST ALL SOUND ROMS ‘SROMO - BROKEN GLASS SROM1 - FABULOUS SHOT!
HOLE IN ONE EVENT
SOUND TESTS SCREEN
To test the coin meter, choose COIN METER TEST from this menu. If everything is working properly, the meter should increment each time the START button is pressed while this line is highlighted.
When CONTROL PANEL TEST is selected, the screen
will display a diagram of a typical GOLDEN TEE '98
GOLF control panel. The controls are highlighted on the diagram when the controls are active. Test all of the controls, including test and service switches. Press FACE LEFT and FACE RIGHT together to exit this test.
Player Controls
oltage Adjust Test
Use this screen to adjust the voltage to the PCB. Itis
OO Golden Tee '98 Golfv1.00 1D 00000001
VOLTAGE ADJUST TEST
PRESS START TO EXIT
VOLTAGE HISTORY IS RESET ON EXIT
HISTORY
VOLTAGE HAS BEEN OK i VOLTAGE HAS BEEN LOW
VOLTAGE HAS BEEN HIGH
CURRENT VOLTAGE IS OK/HIGH/LOW
VOLTAGE ADJUST TEST SCREEN,
HISTORY shows your game's past status.
CURRENT VOLTAGE shows the current status of your voltage. If the voltage is low or high, you may experience some game problems. Adjust your voltage to read 5.2 volts across an IC on the PCB. Exit this screen and re-enter to update your voltage history. This test checks the integrity of the connection from the PCB to the LED sign. Press the LEFT or RIGHT button to activate the sign test. The LED sign will display the code version number, followed by a string of letters and numbers, then a solid bar will scroll across
the display.
Golden Tee ‘98 GofV1.00 1D 00000001
SIGN TEST SIGN COMMUNICATIONOK |
SIGN STATUS
PRESS START BUTTON TO EXIT PRESS LEFT OR RIGHT BUTTON TO RESET SIGN
SIGN TEST SCREEN
Use this test to visually check for non-functioning LED
segments.
The video screen will display the communication status. If the status is bad, contact your distributor or the IT service department.
Serial Port Test
Golden Tee '98 GolfV1.00 1D 00000001
SERIAL PORT TEST
PRESS START TO EXIT
SPECIAL LOOPBACK TEST CABLES MUST BE CONNECTED FOR TEST TO WORK CORRECTLY
MODEM CONNECTOR DATA ATS TO CTS
SIGN CONNECTOR DATA
SECOND GAME CONNECTOR ‘DATA RTS TO C
Golden Tee Golf ’98 - 26
on
APPENDIX A General Troubleshooting
Your game is unable to make an initial call to ITS.
During setup, the text message on the screen says MODEM DIALING and quickly changes to MODEM HANGING UP.
27 - Golden Tee Golf ‘98 Improper phone connection.
Modem in lost state.
No dial tone.
Wrong setting in the Tournament Operator Adjustables. Double check all of the cable connections to make sure they are placed and connected properly.
Be sure the cables are plugged all the way into their connectors. A click should be heard when a proper connection is made.
Make sure the modem is switched ON and its power supply is connected.
Enter Test Mode and go to the Tournament Menu. Under Tournament Operator Adjustables, set FORCE TOURNAMENT UPLOAD to YES. Exit Test Mode and try again.
Turn the game OFF then ON again.
Check for a dial tone by plugging in a regular telephone into the extra jack on the modem. A dial tone should also be heard from the phone.
Double check all of the cable connections.
Be sure the game is connected to a direct outside line. ITS will not work if connected through certain phone systems. A fax or credit card line may be used.
Make sure the modem is switched ON and its power supply is connected.
Set outside line access number, if needed (Tournament Operator Adjustables on page 20)
Be sure all the settings in the Tournament Operator Adjustables are correct. Refer to Tournament Operator Adjustables on page 20 for correct tournament settings.
Phone Line Connection Problems (Tournament Version Only)
a Modem connects but does not transfer © Bad modem or ID number. data. number at the top of the screen. If the ID number is not valid, call Incredible Technologies Service Department.
Be sure the game is connected to a direct outside line. ITS will not work if connected through certain phone systems. A fax or credit card line may be used.
Line is busy. A normally good call is sometimes cut off or interrupted by a busy signal or a noisy line. Wait and the game will try to call again automatically; or go into Test Mode and force a phone call from the Tournament Operator Adjustables menu.
Tum the game OFF then ON again.
Modem transfers data but the screen Improper connection. Be sure the game is connected to a reads CALL IN UNSUCCESSFUL. direct outside line. ITS will not work if connected through certain phone systems. A fax or credit card line may be used.
If the line is being shared, the other phone, fax or credit card machine may be trying to make a call. Wait a few minutes and try again.
A loose connection or bad wire may be the cause. Make sure all connections are securely in place.
Modem in lost state. Turn the game OFF then ON again.
Golden Tee Golf ’98 - 28
No picture
Scrambled Picture
Missing colors or washed out color
Bright, blurry, or rolling picture
Picture too large, too small, or off center
Video image is flipped
Bad images in picture
Diagonal white lines
29 - Golden Tee Golf ‘98 Check Dip switches.
Bad connection.
Monitor.
JAMMA Harness connected improperly.
Missing sync connection or misadjusted monitor.
Bad video connections.
Misadjusted monitor.
Misadjusted monitor.
Misadjusted monitor.
Bad GROM.
GND problem. SW1-Dip switches, | thru 4 must be “ON”.
SW2-Dip switches | and 2 must be ‘ON’, and 3 and 4 must be ‘OFF’
Make sure there are good connections from the board's video outputs to the monitor's video inputs.
Make sure the monitor is operating correctly. (Check it with another compatible logic board.)
Identify Pin 1 on the JAMMA connector and on the PCB. If installed incorrectly, damage to the PCB may have occurred.
Check the sync connection - Adjust monitor
Check the video red, green, and blue connections.
Adjust the monitor, not the board. (Refer to your monitor manual.)
Adjust the monitor, not the board. (Refer to your monitor manual.)
Reverse the monitor's convergence wires or flip the monitor 180°. (Refer to your monitor manual.)
Do GROM test. Check IC pins to make sure none are bent over.
Earth and Logic GND's should be connected at the power supply.
SOUND PROBLEMS
No sound +12 vde power supply is bad
Bad connection to the board.
JAMMA Harness connected improperly
Miscellaneous Try another +12 vdc power supply.
Check for +12 vdc power on the board.
Check for +5 vde power on the board.
Check the volume setting in the OPERATORS ADJUSTABLE section of the Operator Mode.
Check the speaker connection.
Identify Pin 1 on the JAMMA connector and on the PCB. If installed incorrectly, damage to the PCB may have occurred.
Golden Tee Golf ’98 - 30
CONTROL PROBLEMS
Buttons do not work or are partly inoperable. Or the selections keep scrolling on Operator Mode menus.
Coin counter not working
Trackball mounted correctly but is swinging 45° out of line
In a two or more player game, controls only work for players 1 and 3
Trackball does not work
31 - Golden Tee Golf ‘98 Switches not properly connected.
JAMMA Harness connected improperly.
Miscellaneous.
SW1-Dip switch 3, found near the JAMMA, is not “ON”
SW1-Dip switch 2, found near the JAMMA, is in the “OFF” position.
No +5 voltage. Make sure that the common post of the switch is connected to ground.
Make sure each individual switch is working by doing the Control Panel Test found in the SYSTEM TESTS section.
Make sure that the signal wire for that particular switch is connected to the normally open post of the switch.
Identify Pin 1 on the JAMMA connector and on the PCB. If installed incorrectly, damage to the PCB may have occurred.
Make sure that the signal wire has a connection from the switch to the board.
Make sure +12v is hooked up to the counter.
The signal wire is not connected to coin counter. (Check continuity).
Verify that the counter is good.
Make sure SW1-Dip switch 3 is “ON”.
SW1-Dip switch 2 must be in the “ON” position for cabinets with one set of player controls.
Bad inductor(L7) or bad connection to trackball.
POWER-UP PROBLEMS
Bo reaction when game is turned ON
Screen flashes repeatedly Voltage too high.
No power from the power supply.
Power supply needs adjustment.
Short on the board.
JAMMA Harness connected improperly.
Open on socketed IC’s
+5v setting too low.
SW2-Dip switches near the green LED may not be set correctly. Power supply is too high. Power should be between +5v & 5.2v. (Measured on the circuit board).
Cabinet is not connected to earth ground. (All metal should be connected to the earth ground).
Short between power and ground. Check for foreign material.
Disconnect the harness and measure the resistance between power and ground. It should read around 600 ohms. (0 ohms is a dead short).
Make sure the harness is not shorting to anything, such as bare or frayed wires shorting out each other or hitting bare metal.
Replace power supply.
Power supply too low. (Should ideally be between +5v & +5.2v). (Measured on the circuit board).
Check for loose or foreign material on the board.
Identify Pin 1 on the JAMMA connector and on the PCB. If installed incorrectly, damage to the PCB may have occurred.
Check for bent pins on socketed parts.
Make sure that all IC's are seated in their sockets properly.
Check voltage. (Measured on the circuit board).
Make sure SW2-Dip switch #1 and # 2 are “ON”, and #3 and #4 are “OFF”.
Golden Tee Golf ’98 - 32
LED SIGN Problems (Tournament Version Only)
The LED message does not get updated correctly
The LED sign is not on Improper connection.
No power.
Bad cable. Check that the sign cable is plugged into the jack labeled SIGN on the PCB, and the other end is plugged into the LED sign.
Check that the power jack is connected properly to the sign and that the sign is getting power.
Make sure there is +12 volts going to the sign.
Verify that the sign cable is good, by trying a known good cable or by testing the continuity of the cable.
MISCELLANEOUS PROBLEMS
Green LED not blinking
Operator adjustables keep changing
Sounds Bad
Game comes up in Test Mode
Trackball mounted correctly but is swinging 45° out of line
33 - Golden Tee Golf ‘98 Program not running.
Bad connections.
Loose pin on ASIC (U1)
Low battery voltage
Bad static RAM (USO)
Miscellaneous
Dip Switch 1 is “OFF”
SW1-Dip switches are not all “ON” Make sure all socketed IC’s are seated correctly. Look for bent pins.
Make sure you have continuity from PCB to power supply.
Call Incredible Technologies, Inc.
Battery should be 2 to 3 volts.
Replace.
Check the speaker connections.
Make sure SW1-Dip Switch 1, near the JAMMA, is in the “ON” position.
Make sure the SW1-Dip Switches are all “ON”
APPENDIX B
JAMMA Harness Connection and Cabinet Schematic
JAMMA Harness Connection
WIRE COLOR SOLDER SIDE
Yellow-Green Left Speaker (-)
Tan Video Green Green-Black White | Video Syne
Orange-Black Service
Green-Blue Coin2, Red-Yellow Start 2
Brown-Yellow Player 2 - Face Left White-Yellow Player 2 - Face Right Orange-Yellow Volume Down
Black GND Black MO ROTDNK KS AGCHMADAVUAZZM ANDRA OAS
GND
Trackball Harness Connection
Memory Board Connector
GND Black GND Black
+5 vde Red +5 vde Red
+12 vde Orange
Coin Counter Red-Green
Left Speaker (+) Yellow-Red
Video Red Red-Black Video Blue Blue-Black Video GND White-Black
Test Blue
Coin] Red-White Start 1 ‘| Red-White
Player 1 - Face Left_| Brown-White Player 1 - Face Right_| Yellow-White Volume Up Orange-White Coin 3 | Gray-White
Trackball Connector PIN WIRE #1 - Black PIN WIRE #1 - Red PIN WIRE #2 - Red PIN WIRE #2 - Yellow PIN WIRE #3 - Yellow PIN WIRE #3 - Green PIN WIRE #4 - Green PIN WIRE #5 - Blue PIN WIRE #5 - Blue PIN WIRE #4 - Purple PIN WIRE #6 - Purple
Golden Tee Golf ’98 - 34
35 - Golden Tee Golf ‘98 com com MECH I
AMEEUCAN eLoREscenT CORP SESE oir eaxrure iy SBN YESHRoL wc wea ie rn gM soc ecp
in BAWARDeOAO _BNIGR! REV?
[ANE EILTER
TRACKBALL PLATE
4, rh aR Cabinet Schematic
APPENDIX C
ITS Tournament Overview
The ITS, or International Tournament System ™, is a networked system of game machines that are hooked up to a central computer via normal telephone lines. Each dedicated tournament game contains special tournament software and communications hardware that offers players a choice of regular or tournament play. Tournament play allows players from all over the U.S. to compete for prizes. Various skill-based tournaments will be held throughout the year, offering challenges and prizes to players across the country.
The ITS was designed to be as hands-free as possible for the operator and location. Each machine has special communications hardware that easily hooks up to a normal telephone jack. Each game machine is programmed to make a short, toll-free phone call during off hours. The toll-free number that the game dials costs nothing to the operator or location. The tournament machines call the ITS central computer and download statistics from that day's tournament play. During the same call, the central computer sends the new tournament leaders, previously gathered from all of the games in the tournament, back to the game machine. Then, throughout the day, the new national and local tournament leaders are viewed on each game monitor during attract sequences.
The ITS is capable of supporting over 100,000 tournament machines on-line. The ITS will feature a number of national tournaments throughout the year. These tournaments will vary in length from weekly to monthly, with top prize awards ranging from one thousand to potentially one-hundred thousand dollars or more. Before each tournament begins, a message is sent to the LED sign attached to each cabinet, announcing the start dates and prize structure of the upcoming tournament. At the specified date, the tournament automatically begins on all of the valid tournament games.
The entry fee to join the tournament is about twice the cost as regular play, and is entered into the game by the player each time he/she plays. About half of this tournament income is shared by the operator and location. The rest of the tournament fee is sent to the ITS for national, regional and local prize funds, as well as administrative expenses. The ITS receives a portion of tournament plays only. Any earnings collected from regular and practice play is not considered tournament income. This income is split between the operator and location as they see fit.
Connecting to the ITS has been made as simple and complete as possible. The game hooks up to a normal telephone jack using regular telephone wire. Once plugged in, an automatic setup procedure logs the game machine as an active tournament terminal. A simple form must also be filled out, detailing some specific information for that machine, such as game ID number, location name, preferred time for phoning into the central computer, and pertinent billing information.
The ITS was designed with the operator in mind. Each ITS-compatible game can act just like a regular video game on his route. The games can be moved to different locations and will play a regular, non-tournament game even when not hooked into the ITS. Location change forms and off-line notices are supplied in your operator forms package, to keep your tournament activities up to date.
Golden Tee Golf "98 - 36
Game Highlights
e High-earning, successful game.
e Hooks up with a single existing phone line.
© Game machines can be moved from location to location.
© Upto 8 ITS game machines can be linked from modem to modem at a single location and share one phone line.
e Regular play is always available, regardless of tournament status.
© More tournament-compatible games are in development.
Tournament Highlights
¢ Many tournaments will be held throughout the year.
e Tournaments may vary in length, from one to four weeks.
© Cash prizes will be awarded to national, regional, and local winners.
e Every game machine in a tournament will offer an even playing field.
e Different tournaments can be running at the same time.
© Corporate sponsors are being considered for added prizes and important promotions.
Networking Highlights
¢ The game machines automatically call the ITS central computer each night on a toll free number.
¢ The toll free number costs nothing to the operator or location.
« New statistics, such as new leaders and scores, are sent to the central computer.
© Important messages are sent periodically to the LED signs that advertise new tournaments and important information.
© Tournament updates, compiled from all of the collected data of the previous day, are sent to each game machine.
© The entire phone call process takes less than a minute.
e Ifthe game fails to connect with the central computer, it will try again until it is successful.
Accounting Highlights
¢ Tournament billing is routed through an automatic debit account.
e Statements are faxed or mailed before each debit transaction, detailing the tournament billing.
¢ Debit transactions take place one time per tournament, after each tournament ends.
© Complete tournament audits and collection procedures assure accurate and easy record-keeping.
37 - Golden Tee Golf ‘98
ITS Game Initialization Form (Tournament Version Only)
Included with your game is the ITS Game Initialization Form. Fill it out completely and fax or mail it to Incredible Technologies. The information you supply goes into the tournament database and is necessary for your game to join the tournament.
Your game will NOT be included in the tournament until this form is received by Incredible Technologies.
ITS Debit Account Form (Tournament Version Only)
Included in your game is an ITS Debit Account form. All operators must have and maintain a bank account for automatic payment of the ITS portion of tournament play. Please fill out the form completely and send it back to Incredible Technologies, Inc. with a voided blank check or deposit slip from the account. You only have to fill out this form one time, no matter how many ITS games you operate. All of your ITS games can be billed to a single account.
At the end of each tournament, you will be faxed a statement that details the ITS portion of the tournament plays on all of your ITS machines. Your account will be automatically debited for the full amount about four to seven business days after each tournament ends. If the correct funds are not available, the next tournament will be unavailable on your games. The ITS bills for a portion of tournament plays only. Regular play is disregarded by the ITS.
Golden Tee Golf 98 - 38
APPENDIX D
ITS Tournament Procedures
Official Tournament Rules
Insert coins into an active ITS Tournament game and press Start. A selection screen will appear when a tournament is in progress. Select Tournament Play and Insert the appropriate tournament entry fee. Play the entire Official Tournament Course. If your final score qualifies, the game will ask you to enter your full name and Social Security Number. This information is used for winner verification purposes.
Use your real name and Social Security Number or your score may be invalidated. Players can enter the Tournament as often as desired. A player's best score will be displayed on the Leaderboard. Profanity, vulgarity, invalid names and invalid Social Security Numbers will be removed from the Leaderboard. Players who allow their score to be entered under another person's social security number will be banned from all ITS tournaments. You must be 18 years or older to enter a Tournament and claim a prize. Misuse of or tampering with tournament equipment will disqualify the player and/or location from the Tournament.
The Tournament is subject to rules and procedures of the ITS, the tournament location, federal and state law. Void where prohibited. A list of winners will be provided to each tournament location when the Tournament ends. Winners are solely responsible for claiming their winning prize by calling Incredible Technologies at (847) 870- 7027.
Game operators and locations will not pay prizes. A player can only win one prize per Tournament. Only one National winner per location is allowed for each tournament. Only one Regional winner per location is allowed for each tournament. Only one Local winner per location is allowed for each tournament. Tournament rules are subject to change.. New or altered rules from the ITS supersede these posted rules and may be posted on the game LED displays. Prize winners must sign a written claim form and present a copy of a driver's license or other picture ID containing the winner's social security number.
Malfunctions void all plays and refunds are given at the discretion of each tournament location for paid entry fees only. The ITS Review Board shall decide all filed grievance claims. The Board's decisions are final and claims are limited to refund of entry fee only. Employees of Incredible Technologies, Inc. and manufacturers of games used on the ITS system and their immediate families are not eligible. Rules and regulations specific to each Tournament and winner lists from previous tournaments are available by sending a self-addressed, stamped envelope to:
Incredible Technologies, Inc. NOTE:
ITS Information Tournament Rules are subject to change and will
: ul ul subject to change and wil
1600 Hicks Road be updated on the LED signs of participating Rolling Meadows, IL 60008-1240 tournament games. http://www.itsgames.com
39 - Golden Tee Golf ‘98
Begi 1g a Tournament
The following describes what will happen when a tournament begins on your game.
- The LED sign displays a new message 3 to 5 days before the tournament start date. The sign message displays the Tournament name, start and end dates, prize money and tournament rules.
- Tournament data is downloaded to each machine before the tournament begins. Each machine receives the Tournament parameters and start and end dates of the Tournament.
- The Tournament is accessible by players on the start date of the tournament. When a game is started, a special screen gives players a choice to play Regular Play or Tournament Play. This screen is seen only when a tournament is running.
- Players with qualifying scores are asked to enter their full name and social security number at the end of each tournament game. The player's name is then displayed on the various Tournament Leaderboard, shown during the game's attract cycle.
- Each night the game machine calls ITS Central via a toll-free number. During the short call, tournament information is transferred. Transferred data includes National, Regional and Local leaders and Social Security numbers, total number of tournament plays, and any special or instant winners.
- ITS Central processes the data received from all of the tournament machines. After removing duplicate or bogus entries, updated Leaderboard are generated and sent to each machine during the next call. New LED sign messages are also sent, updating the various Leaderboard, prize funds, and other important tournament data. Advertising by corporate sponsors may also appear on the LED sign.
Collection Procedure
Although the tournament games have been designed to be as hands free as possible, there is an extra step that must be addressed during the collection process. You will need to separate the ITS portion of the game's earnings before you make your location split. The ITS only bills for valid tournament plays. All Regular play is ignored by the ITS.
- Collect each ITS Machine as usual on your normal route.
- Press the Test Mode button located inside the coin door. This accesses the game's Test software.
- From the Main Menu, use the Trackball to highlight ITS COLLECTION REPORT AS DOLLARS or ITS COLLECTION REPORT AS COINS and press the START button. Both reports will show the same information, one in total coins and one in total US dollars. You can use either report to match your collection preference.
- Review the entire report. The total dollars or total coins should agree with your collection. Note the number of completed tournament games.
- Review the ITS portion figure. This amount should be separated from your collection before splitting with the location. ITS coins are calculated from valid tournament games only.
- After separating the ITS coins and writing down the values, it is advised to reset the audits so each collection gives accurate data. Highlight RESET COLLECTION COUNTS and press START.
- When you are finished reviewing the coin reports screen, highlight EXIT and press the START button to return to the Main Menu.
Golden Tee Golf ’98 - 40
8.
9. Once the ITS portion is separated, split your collection with your location as usual.
Deposit the ITS portion of your collection into your ITS Automatic Debit Account regularly to guarantee sufficient funds and continue Tournament service.
Ending a Tournament
The following describes what happens at the end of a tournament.
1, The Tournament ends on the advertised end date. Each tournament game is programmed to disable Tournament play at this time. Games in progress are allowed to continue until completed.
The disabled game machine will no longer allow Tournament play. Players will no longer have a selection screen for Regular or Tournament play. Regular play is completely unaffected by the end of the tournament and the game will play as usual.
Final Tournament data is downloaded from each machine during the regularly scheduled call-in time. A new LED message is sent to each machine at this time, announcing the end of the Tournament.
A list of Tournament winners is compiled after all of the games have called the ITS with final data. It may take three to four days for all of the games to make their final calls. When all of the games have reported in, the final standings are transferred to each machine.
Final Leaderboard and new LED messages continue to appear on each game machine after the Tournament ends, to allow players to view the final standings.
Winners Lists are made available to locations for display. The signs include instructions to the winners on how to claim their prizes. Incredible Technologies is responsible for distribution of prizes to verified winners. Operators are responsible for posting the Winners Lists at their locations.
The game machines continue to call the ITS each night, even when no tournament is running. Machines remain on-line in order to monitor for potential problems, as well as be ready to accept new LED sign messages and starting data for the next tournament.
A statement is faxed to the operator at the end of the tournament that details the tournament activity on each of his machines. The total number of tournament plays and the dollar value of the ITS portion of the tournament plays appears on the statement, along with the date that the IT'S funds will be transferred from the operator's automatic debit account. Operators are usually given 4 to 7 business days to make their ITS funds available before the funds are electronically transferred.
41 - Golden Tee Golf ‘98
Prize Claim Procedure
The ITS will send you an official Winners List Poster for each tournament location at the end of a Tournament. Distributors and Operators are required to distribute the Winners Lists to their locations.
Operators should encourage locations to post the Winners List near the game machine for at least one month or longer after the end of the Tournament.
Tournament winners must call Incredible Technologies, Inc. at (847) 870-7027 to claim their prizes. Winners will be asked for name, social security number and winning location, along with their address and phone number.
The ITS will mail Tournament winners a Prize Release form that must be signed and returned with a photocopy of a valid ID that contains the winners address and social security number, for proper verification.
The ITS will mail the winner their prize after a designated verification period, if no duplicate or false claims have arisen. All tournament prize winnings will be reported to the IRS as required. Winners of prizes totaling $600 or more will receive a 1099 tax form at year end.
Tournament winners are solely responsible for claiming their prize and verifying their scores.
Incredible Technologies, Inc. is solely responsible for payments of prizes to valid tournament winners. Distributors, operators and locations are not responsible for payment of prizes to winners.
If discrepancies or duplicate claims arise, Tournament winners may be subject to validation tests and other forms of verification by the ITS Review Board.
Tournament winners must be 18 years or older to enter a Tournament and claim a prize.
Misuse of or tampering with tournament equipment will disqualify the player and/or location from the Tournament.
The Tournament is subject to rules and procedures of the ITS, the tournament location, federal and state law. Void where prohibited.
Golden Tee Golf ’98 - 42
Tournament Icons
Your game contains a simple icon feature that will assist you and your location in monitoring the status of your phone line connections. During the attract sequence of the game, which is displayed when no one is playing, a number of small icons are displayed. The displayed icons will help you determine at a glance the working status of the tournament and your game cabinet.
Tournament Status OK
This icon means that your game is running correctly and your line connections are good. Your game will make one toll-free phone call each day, even if there is no tournament running.
ee
Attempting to make a call to ITS
This icon will appear if an attempt to make a scheduled call was unsuccessful. When an attempted call is unsuccessful, the game will try again automatically. The number of attempts is displayed next to the icon at the bottom of the screen, during the attract mode.
The game will try to call frequently for the first couple of hours, and occasionally after that. After about twenty-two hours, the game will frequently try to call again. If the game has not connected to the ITS within this 24 hour period, the tournament is automatically disabled from the tournament. At this point, the only way to enable the tournament is to force a successful phone call using the tournament menu in test mode, or to fix whatever problem is preventing a successful call.
43 - Golden Tee Golf ‘98 Tournament Disabled.
This icon is displayed when the tournament has been automatically shut off on the game. The tournament is disabled if a game was unsuccessful in connecting to the ITS over a 24 hour period. The tournament also may be disabled from the ITS if tournament forms have not been sent, tournament fees have not been paid, or game tampering is detected.
Often, the game can be restored to the tournament in progress by forcing a successful phone call using the tournament menu in test mode. If the tournament has been reset for other reasons, call your distributor.
BIRLTOME
No Dialtone detected, or modem problem.
This icon is displayed if the game detects a problem with the modem, or if the game cannot find a dial tone. This is a good warning to the location manager that the phone lines may be disconnected and should be checked. It may also indicate a faulty modem, which should be serviced immediately.
To verify a dial tone, plug a normal telephone into the empty jack on the modem. A dial tone should be heard. If not, there is a problem with the phone line, such as a broken phone line or disconnection. Check all of your phone connections and be sure they are correct and secure.
This icon will also appear if the phone line is in use when the game attempts to make a call. If this situation occurs, the game will attempt to make the call at a later time.
APPENDIX E Frequently Asked Questions About The ITS
How do | make the game call into ITS at any time?
Go into the test software and choose Tournament Menu with the trackball and START button. Next select Tournament Operator Adjustables. The top line is Force Tournament Upload. Change that to Yes by rolling the trackball to the right. Exit the test software by repeatedly pressing the START button. The game will then make a call to ITS. If the call fails, enter the test software and exit immediately and the game will attempt to call again.
Does the game call the ITS, or does ITS call the game?
The game is programmed to call into ITS on a toll free line one time each day.
When does the game call ITS and how many times?
The game calls once during the night at a predetermined time selected by ITS. The default calling time is between 2 and 4 in the morning.
What if the game is turned off and misses its scheduled time to call ITS?
As soon as the game is turned on it will attempt to complete a call to ITS.
Can the operator select a specific time for the game to call ITS?
Yes, ITS can give the cabinet a specific time within the hour. Example: between 7am and 8am. Specify this on the Game Initialization Form.
How will | know if a successful call has been made?
When the game is attempting a call, the screen will display an ITS CALL screen. The text near the bottom of the screen will show the status of the phone call. A typical successful call will display the following status messages in this order: Modem Found, Modem Dialing, Modem Connected, Connected to ITS, Data Transfer Successful.
What are the symbols at the bottom of the screen for?
Your game will display a number of icons at the bottom of the screen, to help you know the status of your game at a glance. There are four different icons that are displayed: The gold ITS logo means that you are connected to the ITS system and everything is OK.
The blue telephone icon means that your game has tried to make a call, but was unsuccessful, perhaps from a busy signal or interrupted call. A number will appear next to the icon, showing how many call attempts have been attempted. If this number is big, you probably have a problem with your phone line or modem and it should be checked out.
Golden Tee Golf ’98 - 44
The telephone with the red X through it means that your modem is not receiving a dial tone. This may be caused by the phone cord being disconnected, loss of power to the modem, etc. When this icon is showing, it means that your game is not calling the ITS and will not receive or transmit tournament data.
The ITS logo with a red X through it means that your game has been disabled and removed from the tournament. This happens when your game has not been able to call in for more than 24 hours. Often, this can be remedied by forcing a call or checking your phone connections. This icon may also appear if you have not sent in your paperwork. Your game will not receive tournament information until your paperwork has been processed through the ITS.
When | attempt to make a call to ITS, the game comes back and says no dial tone found. What do | do?
Plug a normal telephone into the extra phone jack on the modem. A dial tone must be heard on the phone. If no dial tone is heard check your phone line connections. If a dial tone is heard, try dialing a phone number to make sure you can call out.
Can | use this game on a rotary phone system?
The game is factory set to call out on a tone system, but you can set your game to use rotary or pulse dialing. Enter the test software and select Tournament Menu with the trackball and START button. Next select Tournament Operator Adjustables. Highlight the Rotary Dial to yes using the trackball and START button.
| have a dial tone but | never get a successful call into ITS. What do | check first?
Make sure the settings in the Tournament Operator Adjustables menu are correct (Refer to page 20 of the manual). Ask yourself some questions. Is this location on a rotary phone system? Is the phone line on a computer phone system? (The tournament may not work on all phone systems.) Do I have to dial something to reach an outside line?
When | force a call into ITS it says modem connected but the game comes back and says ITS call unsuccessful. Why?
The game may be on a noisy phone line. This can be caused by old phone lines, too many devices on the line, or bad lines coming from the phone company. A direct connection to the box coming into the building or a new separate phone line added to the building is a way to rectify this problem.
I made a successful call so why can't | enter the tournament?
The paper work for the game must be sent or faxed to the ITS for processing. Without the paperwork, your game will not receive tournament data and LED messages. Also, a Tournament must be in progress. A game can be added to the tournament up to 1 week after the official start of a new tournament so be sure to get your paperwork in early.
If my board fails can | just go to the distributor and get a new board? NO. Your game PCB has an ID number programmed into it to match your game cabinet. The board ID number that is in the software must match the cabinet ID number, in order for you to receive tournament data. Contact your distributor for all advance replacements, which must be properly initialized by Incredible Technologies.
45 - Golden Tee Golf ‘98
If | call the distributor or ITS for service, what information should | have ready in case the service technician needs it?
The Game ID Number is how your game's status is tracked. The ID number of the cabinet must match the ID number in the software. You can verify this by going into the test software. The Game ID Number is displayed at the top of every screen in the test software. It is also displayed in the Tournament Menu, at the bottom of the Display Timers screen. The number must be 8 digits long, leading with zeros.
Why does the overhead sign have a different name than my location name?
When you send in your paperwork, a sign message is generated for your game. This sign message will display the name of the location. If the location name on the LED display is wrong, you should first check that you sent in the correct Game ID Number. The Game ID Number is located on the back of the cabinet and in the test software. Verify that those numbers are the same. Go into the test software to verify the ID number there. It is displayed at the top of the screen and must be 8 digits long leading with zeros. If your ID Numbers are correct, call or fax ITS and a corrected message will be made.
My overhead sign has some kind of test version on it all the time. Why is it doing that and how do | get a regular message on it?
The ITS pre-loads an introductory message at the factory and should appear when the game is turned on. Sometimes, the sign may lose this message and default to the sign test. To get your correct sign message back, force a phone call to the ITS. The new message will be loaded during this successful call. Turn the game off and back on again to make sure the message stays in memory. Run the sign test in the test software to make sure the main board is communicating to the sign.
How do | know when there is a tournament?
Upcoming tournament dates and prizes will be announced about two weeks in advance. Your distributor will most likely supply this information to you on your first tournament. Announcements of subsequent tournaments will be included with your billing statements at the end of each tournament.
How do the players know when there is a tournament?
Special tournament messages are periodically downloaded to the game's LED message display. These messages announce new tournaments and prizes. The individual Local prize is also announced. The message board begins announcing a new tournament about 4 days before the tournament begins.
How often do Tournaments run?
Tournaments are held about once a month. They usually last about 2 1/2 weeks, with about a week and a half between.
Why don't you run tournaments continually, back-to-back?
Time between tournaments is useful for many reasons. It gives the players a feeling of conclusion, and a sense of anticipation for the next tournament. It gives operators a chance to hook up new games or move their existing games to a new location. It gives the ITS time to generate and mail winners posters to operators.
Golden Tee Golf ’98 - 46
How does a player enter the tournament?
A player enters any amount of money into the tournament cabinet. If a tournament is active, a special selection screen appears. This selection screen gives the player a choice to play a regular game of golf at your normal coin settings, or enter the special tournament course for a specified fee. If the player chooses to enter the tournament, the game asks for the correct number of coins to be added.
Can | adjust the skill level on the tournament?
The skill level and other parameters such as wind speed and pin placement are controlled and set by the ITS. These settings are the same on every machine. You can change the skill level on the regular games without affecting tournament play.
How do I know how much money to send to the ITS?
When collecting your ITS machines, it is important to separate the ITS money from your collection before making your split, so you don't overpay your locations. During your routine collection, use the ITS Collection Report in the test software to determine how much money to set aside for the ITS. You can use either the Collection Report as Dollars or the Collection Report as Coins. It is strongly advised that you reset this report to zero after your collection, so each time you collect, this report will reflect what is in the cash box.
If | reset my reports after each collection, how can | verify my totals at the end of a tournament?
A second set of tournament statistics are stored in the test software, in the Tournament Audits screen, accessed from the Tournament Menu. These numbers cannot be reset by the operator during a tournament and stay up for about a week after a tournament ends. The statistics on this screen are reset to zero by the ITS before the start of each tournament.
How often do you transfer funds from my account?
The ITS bills one time at the end of each tournament. You will be faxed or mailed a statement about 4 days after the end of the tournament. This statement shows the tournament activity on each of your ITS machines, and the total amount owed to the ITS. A transfer date is also displayed, which is usually about 6 days after the statement is faxed or mailed. You must have the full amount in your account by this date. Any questions or discrepancies should be handled before this transfer date.
The billing statement doesn't match my collection numbers. What should | do?
A second set of tournament statistics are stored in the test software, in the Tournament Audits screen, accessed from the Tournament Menu. These numbers cannot be reset by the operator during a tournament and stay up for about a week after a tournament ends. Use this screen to verify the tournament numbers of your machine. Remember, this screen is reset to zero by the ITS a few days before the start of each tournament.
47 - Golden Tee Golf ‘98
How come the standings on the leaderboards sometimes change after a tournament ends?
The ITS collects data from all machines at the end of the day. Because of this, the leaderboards are usually a day behind and need an extra day to catch up with real-time play. The ITS collects and processes the final data to determine final standings. Sometimes this takes a few days, due to unattended or off-line games. When the final data is collected, it is processed to eliminate ineligible players and invalidated entries. The final leaderboards are then sent back to the games at the next call. This process may take a few days.
How do | let my locations know who won?
After the final data is processed, the ITS generates posters of both National and Local winners. Winners posters for each of your locations are mailed to operators about one week after the tournament ends. Operators are encouraged to post these posters at each location for at least 90 days.
How does a winner claim a prize?
A player calls the ITS to claim his prize. The player's name, address and social security number is taken and a Verification Form is sent. The form must be signed and sent back, along with some form of proof of social security number, such as a drivers license. After the Verification Form is returned and processed, the ITS sends the player his check. The ITS pays all prizes to players. The collected funds sent to the ITS at the end of the tournament are used to pay out prizes. Players call the ITS to claim their prize. The operator and location do not pay prizes.
APPENDIX F Warranty Information
If the original purchaser discovers any physical defect in the media (disk, EPROM, tape) on which the software is distributed or in the documentation, which in the opinion of Incredible Technologies, Inc. (IT) prevents the product from being used as reasonably intended, IT will replace the media or documentation at no charge. The purchaser must return the item to be replaced, with proof of purchase, to IT within 90 days after taking delivery of the software.
IT warrants to the original purchaser that the hardware product is in good working condition for a period of 90 days from taking delivery of the product. Should this product, in IT's opinion, malfunction within the warranty period because of a defect in design, materials, or workmanship, IT will repair or replace this product without charge under the terms as follows. Replacement of either the hardware product or its component parts will be only on an exchange basis. Any replaced parts or components become the property of IT. This warranty does not apply to those products which have been damaged due to accident, abuse, improper installation, natural disaster, or unauthorized repairs or modifications.
IT excludes any and all implied warranties, including warranties of merchantability and fitness for a particular purpose, and limits the purchaser's remedy to returning the software, hardware, or documentation to IT for replacement.
IT makes no warranty or representation, either express or implied, with respect to this software, hardware, or documentation, their quality, performance, merchantability, or fitness for a particular purpose. This software, hardware, and documentation are licensed "as is," and the purchaser/licensee assumes the entire risk as to their quality and performance.
In no event will IT be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the software, hardware, or documentation, even if advised of the possibility of such damages. The warranty and remedies set forth above are exclusive and in lieu of all others, oral or written, express or implied. No person, seller, dealer, agent, or employee is authorized to make any modification or addition to this limited warranty.
Some states do not allow the exclusion of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
- INCREDIBLE TECHNOLOGIES, INC. 03/98
Golden Tee Golf ’98 - 48
INCREDIBLE TECHNOLOGIES, INC.
SERVICE / SALES (800) 262-0323 FAX (847) 870-0120 Hardware and Software ©Copyright 1998 Incredible Technologies, Inc. All rights reserved.
Incredible Technologies, Inc. 1600 Hicks Road
Rolling Meadows, IL 60008
- (847) 870-7027