CATHODE RAY TOMES

Super Street Fighter2 Turbo

Super Street Fighter II Turbo (World 940223) (Capcom, 1994) · Manual · 16 pages · 13 sections · original scan

Page 1

© CAPCOM 1991, 1993, 1994. ALL RIGHTS RESERVED.

MANUAL

WARNING

This game is for use in the United States of America and Canada. Sales, export or operation outside of these countries may be construed as copyright and trademark infringements and is strictly prohibited. Violators are subject to severe penalties and will be prosecuted to the full extent of the law.

19-0014

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3
WARNING

THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.

WARNING: This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instruction manual, may cause interference to radio communication. It has been tested and found to comply with the limits for a CLASS A computing device pursuant to SUBPART J and PART 15 of FCC RULES, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his won expense will be required to take whatever measures may be required to correct the interference.

"WINNERS DON'T USE DRUGS"

Louis Freeh, Director, FBI

  • IN COOPERATION WITH THE AAMA AND FBI ANTI-DRUG CAMPAIGN +

CAPCOM INVITES YOU TO USE

OUR SERVICE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER CAPCOM GAME YOU NOW HAVE ON LOCATION. PLEASE HAVE GAME SERIAL NUMBERS AND CABINET NUMBERS READY.

CALL US FOR PROMPT, COURTEOUS

ANSWERS TO YOUR PROBLEMS.

DIRECT NUMBER _ 1-800-833-0190

Page 4

CAUTION

Please keep the following instructions to keep the PC board in good condition

e Do not block the ventilation slots.

¢ Do not drop or bump the board.

e Do not spill any liquids on the case.

e Do not disassemble the case.

ATTENTION

battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste system. Check with your local solid waste official for details in your area for recycling options or proper disposal.

& The product that you have purchased contains a rechargeable battery. The

DISASSEMBLING THE CASE OR REMOVING THE STICKER MAY CAUSE THE TERMINATION OF YOUR REPAIR WARRANTY.

Page 5

PARTS LIST

There are two different kits available for Super Street Fighter II Turbo. The first kit below is the full kit which includes PCB, all necessary graphics, buttons, joysticks and a volume/test bracket. This kit is used for a cabinet that will be upgraded with the CPS II board for the first time. The second kit is called the "B" Kit. This kit is for any that already uses the CPS II board (Super Street Fighter II). This kit includes the "B" board, all necessary graphics and volume/test bracket. You just remove the top cartridge off the motherboard and replace with the new cartridge.

SS1000T Super Street Fighter II Turbo Kit

Part No. Description Qty.

$S1400-01TSuper Street Fighter II Turbo PCB1
06-0044Super Street Fighter I Overlay1
06-0065Super Street Fighter II Turbo Marquee1
GE1200Monitor Card1
16-01301 Player Button1
16-01312 Player Button1
16-0133Red Button4
16-0136Green Button4
16-0134Blue Button4
GE2030Joystick2
06-0066Side Graphics2
03-0050Volume/Test Bracket1
19-0014Super Street Fighter II Turbo Manual1
06-0046Instruction Decal1
06-0067Turbo Decal1

SS1000T-B Super Street Fighter II Turbo B Kit

Part No. Description Qty.

SS1400B-01TSuper Street Fighter II Turbo "B" Board1
06-0044Super Street Fighter II Overlay1
06-0065Super Street Fighter II Turbo Marquee1
06-0046Instruction Decal1
06-0067Turbo Decal1
19-0014Super Street Fighter II Turbo Manual1
Page 6

CONTROL LOCATIONS

  • SAMPLE CONTROL PANEL LAYOUT

puNcH De ©@ oe

MOVE MOVE ED)

LEFT RIGHT SY

= a

  • VOLUME AND TEST CONTROL SWITCHES ON BOARD

The volume of this unit can be adjusted by pressing the volume-up switch and the volume-down switch. The setting you have selected will be stored even if the power is turned off. In the event that the volume setting does not work properly, press down on either the volum-up or the volume down switch for at least five seconds, then set the volume again.

TEST SWITCH VOLUME-UP SWITCH -VOLUME-DOWN SWITCH

  • VOLUME AND TEST CONTROL BRACKET To be mounted on top of the coin box. (Not included in "B" kit)

SERVICE

Page 7

CONNECTORS

.JAMMA:JAMMA 56-pin connector
.OPTION:Player 3 and Player 4 Interface
.AUDIO OUT:Used only for CAPCOM QSOUND cabinet
.REGISTER:Optional I/O connector for register

JAMMA CONNECTOR OPTION CONNECTOR

SOLDER SIDECOMPONENT SIDEcnp | 34|————____
cnp | a | 1 | GND1P SHORT KICK19|——_9—O—
GND | B | 2 | GND1P FORWARD KICK17 | ——o—0—_
+5V | C ] 3 | 45V1P ROUNDHOUSE KICK16 | ———O0——o0—_

+5V | D | 4 | 45V

Nc.|E | 5 | Nc.GND | 33|——————_
+12V | F | 6 | +12V2P SHORT KICK2.| ——0—0—
H|72P FORWARD KICK23|——0-—O0—_
Nc. | J | 8 | COUNTER12P ROUNDHOUSE KICK9|——o—o_

Lock OUT2 | K | 9 | LOCKOUT1 SPEAKER (.) | L | 10 | SPEAKER (+)

Nc. | M]|11 | NC.VOLUME UP | 29|——_o—o—_
VIDEO GREEN | N | 12 | VIDEOREDVOLUME DOWN | 30|——oO—O—
VIDEO SYNCP13 | VIDEO BLUEVOLUME COMMON31———_—_—

FREECREDIT | R | 14 | VIDEOGND Nc. | S | 15 | DIAGNOSTICS 2PCOIN | T | 16 | 1PCOIN 2PSTART | U | 17 | 1PSTART 2PUP | V | 18 | IPUP 2P DOWN | W | 19 | 1PDOWN m ma

2P LEFTx20LEFT33 | QOOOo0o000000000c00 | 1

2P RIGHT 21 | 1PRIGI 2PJABPUNCH | Z | 22 | 1PJAB PUNCH 34 | GOOoooo0o0o00o0000000 | 2 2P STRONG PUNCH | a | 23 | 1P STRONG PUNCH 2P FIERCE PUNCH | b | 24 | 1P FIERCE PUNCH NC. | ¢ | 25 | NC. Harness Side Nc. | d | 26 | Nc. GND | e | 27 | GND GND | f | 28 | GND

CONNECTOR LOCATIONS

COIN METER REGISTER

A aN

  • ee Ie O-O ))
VA crreemI<avnio our ror osounn

{LY —____ en (RIGHT: RED, LEFEWHITE)

JAMMA OPTION CONNECTOR

Page 8

TEST MENU

The test menu allows you to test the functions and controls of the game. These items include input devices such as joysticks, buttons and coin mechs, output devices such as monitor, speakers and meters. Through the Test Menu you can also access the Configuration Menu, where you can change the settings of the game.

ACCESSING THE TEST MENU

. For a CAPCOM cabinet, or a cabinet equipped with a test switch: Turn on the main switch, then push the test switch. The screen shown below will appear. . For a cabinet without a test switch: Push the test switch on the side of the blue plastic electronic casing. Refer to the Controls Section of the manual.

INPUT

OUTPUT

SYSTEM CONFIGURATION

MEMORY TEST

SOUND & VOICE

COLOR

DOT CROSS HATCH

CHARACTER

EXIT 1.

2.

3.

4.

5.

6.

7.

8.

9.

HOW TO SELECT AN ITEM

. Use the Player 1 Joystick to Move the A character in front of the desired item and press the Player 1 JAB button. . To return to the test menu, push the Player 1 Start and Player 2 Start Buttons simultaneously. The test menu automatically appears: . After you exit the "3. SYSTEM CONFIGURATION MENU". . After the memory is tested on the menu of "4. MEMORY TEST".

CLOSING THE TEST MENU

To close the Test Menu, highlight "9. EXIT" and push the Player 1 JAB button.

Page 9
  • TEST MENU ITEM DESCRIPTIONS

INPUT Used to test all the input switches. "1" appears when the switches are depressed. OUTPUT Check connections and switches in case "0" appears

SYSTEM CONFIGURATION Used to change the game play settings. Refer to the SYSTEM CONFIGURATION MENU setion.

Used to test memory. MEMORY TEST "OK" appears when each block of memory Passes test. "ERROR" appears in case of malfunction. If "ERROR" appear, repeat the memory test. Contact your distributor if "ERROR" still appears.

Select a code of SOUND or VOICE with the Player 1 Joystick. SOUND & VOICE Push the Player 1 JAB button to hear the sound of the selected code, then adjust the volume.

Shows color bars of red, green, blue and white. COLOR Adjust RGB and brightness to obtain the optimum color balance and solid black background.

DOT CROSS HATCH Used to test the screen size, focus and distortion.

CHARACTER Used to check all game characters.

EXIT Select this item and push the Player 1 JAB button to return to

game play mode.

Page 10

SYSTEM CONFIGURATION MENU

  • TO OPEN THE MENU

. From the Test Menu, move the A character to "3. SYSTEM CONFIGURATION" and push the Player 1 JAB button. The screen below will be displayed.

COIN 1COIN 1 CREDIT

GAME DIFFICULTY 4/MEDIUM

SOUND STEREO

DEMO SOUND OFF

CONTINUE ON

START MODE OFF

MONITOR FLIP OFF

GAME SPEED TURBO 2

FACTORY SETTING

EXIT

  • CHANGING THE CONFIGURATION SETTINGS

. Move the Player 1 Joystick UP or DOWN to move the arrow to the desired option. Once the option is selected, move the Joystick LEFT or RIGHT to change the setting. Refer to menu on the next page for option settings.

  • SAVING SETTINGS AND CLOSING THE MENU

. Once the configuration settings are changed, save the new settings by selecting "EXIT" and pushing the Player 1 A START button. + Amessage "SAVING NEW CONFIGURATION IN EEPROM" appears while new settings are being saved. It takes one or two seconds to save the new settings. Do not turn off the power switch while saving is in process.

Page 11
  • SYSTEM CONFIGURATION MENU OPTIONS
1 COIN1 COIN1 COIN1 COIN1 COIN

1 CREDIT | 2CREDITS | 3CREDITS | 4CREDITS | 6 CREDITS COIN

2 COINS3COINS|4COINSFREE

COIN CONTINUE

1CREDIT| 1CREDIT |1 CREDITPLAY
LEVEL 1LEVEL 2LEVEL 3LEVEL 4
EASIESTVERY EASYEASYMEDIUM

GAME DIFFICULTY

LEVEL 5LEVEL 6LEVEL 7LEVEL 8
MEDIUM HARDHARDVERY HARDHARDEST

SOUND STEREO (Q SOUND) MONAURAL

DEMO SOUNDONOFF

CONTINUE ON OFF

START MODEONOFF
MONITOR FLIPONOFF
GAME SPEEDTURBOO| TURBO!| TURBO2 |TURBO3FREE

SELECT

Factory settings are in bold face. After you change the setting, make sure to select "EXIT" and push the Player 1 Start button. Choose STEREO (QSOUND) if your cabinet is equipped with the Qsound Speaker System, otherwise select MONAURAL for proper sound effect.

Page 12

5. SYSTEM CONFIGURATION ITEM DESCRIPTIONS

COIN Sets the charge per play

GAME DIFFICULTY The higher the number, the more difficult the game play.

SOUND STEREO or MONAURAL. STEREO: with QSOUND MONAURAL: without Q9QOUND QSOUND is available with CAPCOM QSOUND cabinets only. For other cabinet, please set to MONAURAL

DEMO SOUND Turns attract sound on or off.

CONTINUE Allows a player to continue playing after he loses. Extra money will need to be added to continue.

ON: Continuous play is possible OFF: Continuous play is not possible

START MODE Sets whether or not it is possible to start a one player game from the Player 2 side. ON: Game can be started from the Player 2 side OFF: Game cannot be started from the Player 2 side.

MONITOR FLIP Flips the screen. If the screen appears upside down, change the setting. ON: Upside down OFF: Right side up

GAME SPEED Sets the overall game speed. TURBO 0... Approx. the same speed as Street Fighter II. TURBO 1... speed midway between Stret Fighter II and Street Fighter II Hyper Fighting. TURBO 2... Approx. the same speed as Street Fighter II Hyper Fighting TURBO 3... Faster that Street Fighter II Hyper Fighting FREE SELECT... Player can select the speed at the begining of each game.

FACTORY SETTING To return to the factory default settings, select this item and push the PLAYER | START button.

EXIT To save the setting changes and return to the TEST MENU, select this item and push the PLAYER 1 START button.

Page 13

MOUNTING THE PC BOARD

  • INSTALLING THE MOUNTING BRACES

4 mounting braces are included in the package

  • MOUNTING THE PCB

These screws are not included in the package. q

Page 14

HOW TO REMOVE THE TOP "B" CARTRIDGE

In the future, there will be the capability to remove the top "B" cartridge so that a game can be converted to a new game or upgraded to a different version. It is very important only to seperate the top cartridge from the main board only. Dissasembling either case will void your warranty. Follow the instructions below to seperate the two assemblies.

+ Remove the 2 case clamps. . Carefully pull the the "B" cartridge off the bottom cartridge.

STICKER DESCRIPTIONS

Sealing sticker

Cartridge serial number sticker Game title sticker set 8 rial number

  • ars sticker ‘Waming information sticker Reverse Side of Cartridge

Sealing sticker

‘Waring information ; sticker Cartridge

Serial Number (bottom of case)

Main Board

Disassembling the case or removing the sealing stickers will void your warranty!

Page 15

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 16

535 Oakmead Parkway Sunnyvale, CA 94086