Pop n Pop
Pop'n Pop (Ver 2.07O 1998/02/09) (Taito Corporation, 1997) · Manual · 14 pages · 19 sections · original scan
TKITO ™ TAITO F3 PACKAGE SYSTEM
POP'N POP
Instruction Manual
ACaution
- To use this machine safely and correctly, read this manual carefully and make sure you fully understand the contents before using the machine.
- After reading this manual, keep it in a designated place so that it can be referenced by others anytime.
TAITO CORPORATION. G2500872A
- Prior to executing the alternation work, make sure to turn OFF the power.
- Use a JAMMA standard connector (56 pin edge connector having 3.96 mm pitch) for the edge connector of the mother PC board.
- After turning on the power, adjust the power supplied to the mother PC board that its level becomes the rated voltage at the mother PC board connector section. + After the modification work, make sure to execute the “factory setting” selection in the test mode. Without executing the “factory setting” selection after exchanging the ROM package, the machine may malfunction.
- 1X2 8-directional joystick -2X2_ button switches
8-directional joystick
vas Button B <q [> > sz Left/Right Character Movement Release Balloons Revolve Balloon Position
GD Turn OFF the power switch on the housing
- See the instruction manual for the specific housing to learn how the housing should be installed.
Open the printed circuit game board access cover on the housing.
Set switch JP3 on the F3 mother board.
| Pram [i SATA peeeeme to
- Joystick:Set the JP3 switch to the "JOYSTICK" position.
If your system has a joystick, Procedure €
ne f Pullout Tele J P3
Eee Slide the JP3 switch to the "JOYSTICK" position.
Turn OFF the power switch on the housing.
Close the printed circuit game board access cover on the housing.
"M2" connector “3P" connector "4P"connector y __(solderedside) sy ymecton
“G" connector foe iP 8 BZ connector ae connector iS) | | | “AA" connector TEST SW Note:See the caution below.
- This PC board has no dip switches. For selecting play fee and game contents, set at the test mode.
“Caution:
- There is a dial on the PC board which is not for volume loudness adjustment. This dial is correctly adjusted at delivery. Never touch it.
- Set the JP3 to the "JOYSTICK" side.
[Connector terminal list]
[|______G connector (JAMMA) | ~« By connecting two speakers to the S connector as side shown below, you can get realistic stereo sound.
“S” connector [In the case of applying a stereo system]
[1 | SPEAKER (+)] 2 SPEAKER (=) 3 | SPEAKER Se ee [4| SPEAKER (+) |
SPEAKER LEFT
“S" connector [In the case of applying a monaural system]
[To enter test mode]
- Press the TEST switch on the game machine cabinet or the TEST switch on the mother PC board.
TESTMODE MAIN MENU
> MONITOR TEST
SWITCH TEST SOUND TEST CONFIGURATION FACTORY SETTING
EXIT (RESET)
ECT WITH THE LEVER 1P—SELECT BUTTON OR 1P-SW1 BUTTON
VER * .*¥#*A DRE RK [Screen display]
- Move the cursor vertically by shifting the 1P side joystick up and down,and press the 1P side button A or select button. The machine initiates the test of the selected item.
- When you enter the test mode while having credits,the machine clears the credits.
- To end the Test mode,please select "EXIT(RESET)" and press the 1P side button A or select button.
[Monitor test]
- Select [MONITOR TEST] item from test mode main menu and press the 1P side select button,a cross-hatch image appears. Check distortion of screen display image with this cross-hatch.
[Screen display]
- Each press of the 1P side select button changes display between cross-hatch and color bar. With color bar image,check color tone of the screen display.
PUSH TEST SW RETURN TO MENU
{Screen display]
- Press the TEST switch to return to main menu.
[Switch test]
- Select [SWITCH TEST] from test mode main menu and press the 1P side button A or select button. This test is to check input signal(function) of each switch.
- Press each switch one by one and if its corresponding indication on the screen changes from OFF to ON, its switch input is normal.
| SWITCH TEST COIN-A: OFF COIN~-B: OFF SERVICE: OFF TILT :OFF
| 1P—CONTROL 2P—-CONTROL
SELECT:OFF SELECT:OFF
SWISOFF SWI:OFF 2: OFF 2:0FF
LH U:OFF LH U:OFF D: OFF D: OFF Ls OFF L:OFF R: OFF R: OFF
PUSH TEST SW RETURN TO MENU
[Screen display]
- Press the TEST switch to return to main menu. *"SW 1" and "SW 2" on this screen mean button A and button B, respectively.
[Sound test]
- Select [SOUND TEST] item from test mode main menu, and press the 1P side button A or select button. This test is to adjust sound loudness of the game.
- Select an item by moving the player one(1P) side joystick up and down,and select the sound code and loudness by moving the same joystick left and right.
SOUND TEST
>SOUND CODE :001 VOLUME :30 MING JMAX EXIT
| ELECT | WITH | THE | LEVER |
USH I1P—SELECT BUTTON
| OR | 1P—SW1 | BUTTON |
Ss P
[Screen display]
[To store changed contents of sound test]
- Select [EXIT] in [SOUND TEST],and press button A at the player one(1P) side. The screen shown below appears on the monitor.
- To save the change,select YES. Or if you don't want to save,select NO. (To select between YES and NO,move the joystick at the player one(1P) side left and right,and press button A at the player one(1P) side to determine selection.)
SOUND TEST
| ECT | WITH | THE | LEVER |
1P—SELECT BUTTON
| OR | 1P—SW1 | BUTTON |
[Screen display]
[Configuration]
- Select [CONFIGURATION] from the test mode main menu and press button A at the player one(1P) side,the screen shown below appears on the monitor.
- In the [CONFIGURATION], you can set play fee and game contents.
- Select an item required to set by moving the joystick at the player one(1P) side,and change set contents by moving it left and right.
CONFIGURATION
> GAME STYLE :D MONITOR T NORMAL
| ATTRACT | SOUND | [WITH |
OIFFICULTY 'NORMAL
| CONTINUE | PLAY | -WITH |
VS ROUND 23
| PLAY | PRICE | 7 1COIN |
> 1CREDIT
| SAME | AS | PLAY | |
| ECT | WITH | THE | LEVER |
1P-SELECT BUTTON OR 1P—-SW1 BUTTON
[Screen display]
- For the contents of configuration,see the next page.
[Contents of configuration]
[COMMON SETTING] [FOR NORTH AMERICA]
GAME STYLE COINA « 1COIN » 1ICREDIT
| acows _| _4CREDITS ee 6CREDITS BUY-IN PRICE * SAME AS PLAY ATTRACT SOUND WITHOUT
DIFFICULTY ma |
VERY HARD
CONTINUE PLAY WITHOUT i ee ee -_1C0mN »_1CREDIT | _scoms _| __screpits 4COINS 4CREDITS os SCREDITS a | 6CREDITS
COIN B 1OREDIT
| __2cows |. 2CREDITS 3CREDITS
4CREDITS 3COINS
4COINS
« Factory setting
[To save changed contents of configuration]
- Select [EXIT] in [CONFIGURATION],and press button A at the player one(1P) side. The screen shown below appears on the monitor.
- To save the change,select YES. Or if you don't want to save,select NO. (To select between YES and NO,move the joystick at the player one(1P) side left and right,and press button A at the player one(1P) side to determine selection.)
CONFIGURATION
ECT WITH THE LEVER I1P-SELECT BUTTON OR 1P—SW1 BUTTON
{Screen display]
[Factory setting]
- Select [FACTORY SETTING] from the test mode main menu,and press button A at the player one(1P) side,the screen shown below appears on the monitor.
- To revert all preset data to factory set values,select YES. Or if you don't want to revert,select NO. (To select between YES and NO,move the joystick at the player one(1P) side left and right,and press button A at the player one(1P) side to determine selection.)
FACTORY SETTING
ARE YOU SURE?
[YES] NO
ECT With THE LEVER 1P-SELECT BUTTON OR 1P—SW1 BUTTON
[Screen display]
[Exit]
- Select [EXIT] item from the test mode main menu,and press the 1P side button A or select button. The screen terminates test mode and returns to game mode.
TAITO
| ©TAITO CORP. 1997
3 or More of the Same Color Balloons Will Break the Balloons on the Cloud. The Stage Clears When Breaking All Balloons. Game Over If the Advancing Balloons Cross the End Line.
ITEM GUAGE
Increase the Bonus Gauge
by Breaking Balloons.
Multi-platform Breaks Increase Gauge More When Guage Fills, Special
Increase Gauge More.
Items Come Out.
TAITO CORPORATION.
©TAITO CORP. 1998 PRINTED IN JAPAN
Connection of the mother PC board and ROM PC board
(1) Match both triangle marks (shown below) of the mother PC board and ROM PC
board. Then insert the connector.
- Lock the two fixing holders of the mother PC board on the ROM PC board. Each fixing holder has two tiny claws to lock onto the ROM PC board. Comfirm that these claws are appropriately locked by hearing a "click" sound.
- When taking of the ROM PC board from the mother PC board, follow the reverse
procedure of item (1) to (3) above. However, when removing the fixing holders which are locking onto the ROM PC
: board, take out the claws one by one to release locking.
- Set the on PC board on the mother PC board so that there is no gap at the four Then follow the procedure of item (1) to (3) above.
corners. G2500749A
VORSICHTSMASSNAHMEN ZUR HANDHABUNG Dieses Produkt beinhaltet Prazisionselektronik-Komponenten. Behandeln Sie diesen Behater mit auB8erster Sorgfalt. 1 belpiachion indbserrarinondesiid rece gle cunt escuchar oder Komponentendie eine hohe Warmeabstrahlung haben. 2 tryna Behalter nicht fallen und rittein Sie nicht an ihm.
- Halten Sie das innere des Behalters trocken und frei von fremdartigen Gegenstanden,
- Blockieren Sie die Ventiatoren nicht.
- Folgen Sie beim Austausch von Patronen den Beschreibungen in der Bedienungsanleitung.
- Versuchen Se nicht, die Patrone zu zerlegen, da sdmtiche Garansen erléschen, wenn de Patrone zeriegt und der Siegel nicht mehr unversehrt ist
PRECAUCIONES
Este producto contiene componentes electrénicos de precisién. Tenga mucho cuidado al manipular este recipiente.
- Evite usar o almacenar la caja cerca de objetos o componentes de alta temperatura. No deje caer ni sacuda el recipiente. Mantenga el intenor del recpiente libre de humedad y de materias extrarias. No bloquee los ventiladores. Para reemplazar el cartucho, siga el procedimiento descrito en el manual de instrucciones, No intente desarmar el cartucho. Todas las garantias quedaran nulas si el cartucho es desarmado o si el sello es roto. mewn
a
PER BA FERRARO, PMR RAIHM VL. |. BARS ROMA EAMES.
- ABTA Sct.
- RIFAAR, MARR.
- DRBABSL, 5S. Sh Shy Ai ARE RA ET RR
- DRE, KRAMER, —RA Ris hs RAR,
TAITO PRECAUTIONS DE MANIPULATION
Ce produit contient des composants électroniques de préision. Faites particuliérement attention lorsque vous manipulez ce conteneur.
- Evitez d'utiliser ou de ranger la boite prés d'objets ou de composants shautes températures.
- Ne pas laisser tomber ou secouer.
- Préservez linténeur du conteneur de I'humidité et des corps étrangers.
- Ne pas bloquer les ventilateurs.
- Lors du remplacement des cartouches, suivez la procedure de tonctionnement du manuel dinstructions.
- N'essayez pas de démonter la cartouche, Si elle est démontée ou si le scellament est cassé toutes les garanbes seront nulles et sans effet.
PRECAUZIONI SULL'USO
Questo prodotto contiene dei component elettronici ad alta precisions. Maneggiate quest unita con molta attenzione.
- Evitate di usare o niporre la custodia nelle vicinanze di oggetti o componenti che generano alte temperature.
- Fate attenzione a non far cadere o esporre lunita ad urti 3, Assicuratevi di mantenere sempre la parte interna della custodia priva di umiditae di oggetti estranei
- Non bloccate 1 fon di ventilazione.
- Alla sostituzione delle cartucce, seguite le istruzioni fornite nelmanuale deiPunita 6, Non cercate mai di smontare la cartuccia. Nel caso in cui venisse smontata oppure se il sigillo fosse spezzato, la garanzia non sara pi valida.
ABN FO] = Ee Sus MSeoe2 wsoixy gece. CHa VR Aaatol Fol speys xlr Fal] wpereict,
. FEHLE Del SH 7 HOloAME ApSatal aHAYAl2, . SAR 7A] RES sol FYAS, « BOL FAO] BOA] RSS soy FAL, . SB PAO} Yor] RSF sto FYA\L, . EAA DES GE Aa SAAS AlAlol Get Fale. . ASAT Bslstz] OAS, gel Bais BP SE Fel A (seal) S BEAZ SS, pel SF Rect. Mum eunw —
G9500848A