CATHODE RAY TOMES

Sol Divide Sword Of Darkness Operator's Manual

Sol Divide: Sword Of Darkness (Psikyo, 1997) · Manual · 4 pages · 8 sections · original scan

Page 1

Baal

Si 4 a ee 5)

SWORD/OF DARKNESS)

OPERATOR'S MANUAL

©1997 PSIKYO

Page 2

HNote

This product is displayed in a long, vertical manner on most monitors. If you play it without adjusting the monitor ratio, it is possible to lose some features, such as the operation manipulation. Before playing, please make any necessary adjustments to the monitor ratio. 3 See “Screen Test" for an explanation of the test mode.

@Make sure the power is off when you plug the power source in or out. @Please use the edge connector on a JAMMA standard approved PC Board (56P edge connector, 3.96mm pitch). @After turning on the power, adjust the electric power supply source to the designated voltage with the connector part of the PC board. @Avoid strong jolts to or getting water on the PC board. Also, take extreme care when working inside the cabinet, so the PC board will not be damaged.

HHow to Play @8 direction Joy Stick + 3 buttons @Button 1 is for Shot Attack. Button 2 is for Slush Attack. Button 3 is for Magic Selection. @Button 1 + Button 2 enables the Magic Attack function. @2 player can play together. One can join in the middle of the game.

Connector Chart Specifications of The Control Panel | SOLDER SIDE|NO|NO. PARTS SIDE _|

eS 6: oi : Button 2 Button 3 COIN COUNTER 2 COIN COUNTER 1 Joy Stick Button 1 : SP (—) SP (+) VIDEO GREEN VIDEO RED

Push Buttons 1 and 2

at the same time 14

s/4 EPosition of The Volume Switch COINSW2| T_| 16 | COINSW 1 ap staat | U | 17 a 8

2 2P RIGHT 1P RIGHT 2P BUTTON 1 1P BUTTON 1 2P BUTTON 2 1P BUTTON 2 2P BUTTON 3 1P BUTTON 3

Power Supply DC+5V DC1+2V

Monitor Horizontal Screen

JAMMA - Game Style Simultaneous play by 2 players

Page 3

Explanation of The Test Mode

When you push the test switch on the game machine, it automatically turns to the test mode. Choose the testing item by sliding the stick up or down, then select » Screen Test the item by pushing Button 1. Input Test When the machine mode is changed when credits Sound Test NOTE! are still present, those credit will be cleared. Test Mode

Game Setting Exit(Reset)

> Screen Test Push the Joy Stick to the " right", and 3 types of test screens will be provided. Push any button and the screen goes back to the Main Menu.

  • 5 Circles are displayed. Adjust the monitor with the H-Size and V-Size knobs until the correct screen ratio is achieved, as shown below. Without this adjustment, most monitors will show horizontal ovals in the monitor.

Necessary Adjustment Correct display

  • Lattices are displayed on the full screen. Adjust the monitor with H-Size and V-Size knobs until it is correctly located in the monitor.
  • White, red, green and blue color bars are displayed. Check and adjust the balance and make sure the colors to not wash out at the edges. Also check the length of the belt from white to black, making sure it is about the same length as the arrow displayed on the lower part of the screen, and check to make sure that the background is sufficiently black, using the RGB and Bright functions on the monitor.

> Input Test This test is to check the input ability of the Joy Stick and buttons. If the input is normal, the name of the part will be emphasized on the display. To return to the Main Menu, move Player 1's Joy Stick to the right and push Button 1 at the same time. > Sound Test stiesmeeswaens EEO. cececemee Confirm whether there is audible sound or not. To go back to the Main Menu, choose Exit.

> Game Setting Sa a OE This enables you to set the contents of the game, such as coin settings and difficulty. Choose the item by moving the Joy Stick up or dawn, then change the setting with a sideways movement. See the explanation for Game Settings on the next page.

> Exit (Reset) cE ee This finishes the test mode and the game should be back on the monitor. Please note that if the test switch is not a "Button type ", the game will not.come back unless the test switch is turned "Off ".

Page 4

Explanation for Game Settings

This enables to setting of the game contents, such as coin settings and difficulty. Items are selected by moving the Joy Stick up and down. Then, changing of the contents can be done with a sideways movement of the stick.

Monitor Flip This reverses the monitor. If the monitor display is upside down, choose " Reverse ". %* When shipped from the factory, it is set to " Normal ".

Coin Slot This determines if the coin shooter setting is common or independent. Same* 1 display of CREDIT. This is common for 1 or 2 players to play. Individual 2 displays of CREDIT. Use one slot for a 1 Player game and the other slot for a 2 Player game.

Coin This determines the coin setting. 1 COIN = 1 CREDIT* 1 COIN = 1 CREDIT 2 COINS = 1 CREDIT Individual | 2 COINS = 1 CREDIT 3 COINS = 1 CREDIT ‘ 3 COINS = 1 CREDIT 1 COIN =2 CREDITS | Setting can 1 COIN =2 CREDITS be done for ‘i 1 COIN =3 CREDITS | each siot. 1 COIN =S CREDITS | Onesetting 1 COIN =4 CREDITS T COIN =4 CREDITS | Ooyimon tor 1 COIN =5 CREDITS T COIN =5 CREDITS _| both siots. 1 COIN =6 CREDITS 1 COIN =6 CREDITS

Start = 2 COINSBoth slotsStart = 2 COINS
Continue = 1 COINwill be set atContinue = 1 COIN

acommon

Freesetting.Free

Demo Sound This sets the demonstration sounds that attract customers when the game is not being played.

On With customer attraction sound. Off * Without customer attraction sound.

Difficulty This sets the game difficulty to one of four levels: Easy, Normal*, Difficult and More Difficult.

Factory Setting Push Button 1 and the setting returns to where it was when shipped from the factory. The above items marked with a star (*) denote the factory setting.

Exit To go back to Main Menu, place the cursor here and push Button 1. When the setting of the game has been changed, the machine will ask whether to save the new setting or not. If you want to save the setting you've made, choose "Yes".