CATHODE RAY TOMES

Sega Titan Std Resolution Video Game Cabinet

SEGA Titan Standard Resolution Video Game Cabinet (SEGA Enterprises, Inc., 1996) · Document · 34 pages · 24 sections · original scan

Page 1

SEGA

SEGA TITAN STANDARD RESOLUTION

VIDEO GAME CABINET

CABINET SERVICE MANUAL

SEGA ENTERPRISES, INC.

Revised August 7, 1996

Page 2

SEGA ENTERPRISES, LTD. , supported by its high electronic technology of LSIs, microprocessors, etc. and a wealth of experience, has for more than 30 years been supplying various innovative and popular game machines to the world market. This Service Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards ST-V, the SEGA Titan Video Games System. This manual is intended for those who have knowledge of electricity and technical expertise especially in ICs, CRTs, microprocessors, etc. Carefully read this manual to acquire sufficient knowledge before working on the machine. Should there be a malfunction, nontechnical personnel should under no circumstances touch the interior system. Should such a case arise, contact our Main Office or the closest branch office as follows: SEGA ENTERPRISES, INC. (U.S.A)/CUSTOMER SERVICE 45133 Industrial Drive, Fremont, California 94538 USA Phone: (415) 802-1750 FAX: (415) 802-1754 Monday- Friday, 7:30 am to 4:00 pm, Pacific Time

Copyright Notice

This SEGA product has the copyright notice as follows: © SEGA 1996 This signifies that this work was disclosed in 1996 and is the property of SEGA ENTERPRISES, INC..

Page 3

Contents

INTRODUCTIQN,......2cscscsescesccctcesctscsersscesscsseee D GENERAL PRECAUTIONS .....2ceccececcsessescescscescees 4 Installation and Location Precautions..........cccccscceseereesteesseceeeneees 5

SPECIFICATIONS .....cecsccecscsesecectecscrcsccscsesesseses O Dimensions/Electrical Ratings .............2c:eessececesscesaeeaeeeessceeseeseseeenere 6

ACCESSOFICS ....cseceeseereeseeeesneteeseaaeraceaeneneecestceneaeseniecerenetecenteeseaneres 6

Name and Position of on-Board Connectors, Switches, Etc

Monitor Direction, Horizontal Frequency ........:scessececessssesssseceeees 8

Coin Assignments and Coin Port ......-cesssesssceeeeseensesrersrenesasererseenaes 8

Control Panel and Board WO ........:cccceseeteeeteeetees

  • S6P connector JAMMA) ....0 0... c cece cece ccc eee tenet cent tet eee cnet eset teres b:

INSTALLING THE BOARD........ececessesescesessescsee 10

Test MODE....... 11 A) Normal Test Mode .... -11

Memory Test..

C.R.T. Test .. 13

Input Test... 214 Clock Adjustments ....cccccccccecececsceeeeteeecctteeetasstteeeeseeetetteesectanenenes 15 System AssigMMeNts cisess. casns cansis comers creensecans yersssccaa ceewns coarensaas cents 16 B) Factory Test MOde «0.0.2... e eee ce nee e et tier etter terrae 18

WIRING FOR THE BOARD ....ccececesceese 2-Player Simultaneous Play, 6-Button Specifications (2L12B) .

3-4 Player Simultaneous Play, 3-Button Specifications (3L9B, 4L12B)....... . 20

Coin MECHANISM.... 23 Replacing the Coin Mechanism .

Coin Meter ..

TROUBLESHOOTING «ues. ccececesceceecececcecsscscceeess 24

PARTS LIST .......ccccceecececcecscecsecscsccscceceserseses DOD

Page 4

INTRODUCTION

The SEGA Titan Video Game System (ST-V) represents a new generation of video arcade machines for the 21st Century. The ST-V System has been developed in response to feedback from commercial gaming operations. ST-V’s design has been driven by your need for a faster return on investments: ¢ Your cost of ownership for maintenance will be lower due to equipment longevity and reliability. ¢ The modular parts can be easily exchanged and upgraded for various game configurations.

  • Tampering is reduced because of improved security features. ¢ There is easier access for repairs and servicing of the equipment, resulting in less down time.

Security features The ST-V front panel is molded so that the coin vault is an integral part of the front panel. This panel is then secured to the back and bottom panels with trilobular screws, to prevent unauthorized removal. These precautions ensure that the only access to the cash box is through the front cash box door. Also, there is an exclusive key for the front cash box door that doesn’t fit any other locks on the ST-V unit.

Easy access for service and maintenance All servicing of the ST-V unit is accessed through the hinged control panel. There you can find buttons for monitor adjustments, volume control, credits and servicing procedures. Coin jams can also be cleared by opening the control panel. It is only necessary to open the back access door when changing the game cartridge or for occasional vacuuming. It is easy to clean the exterior of the ST-V unit. Simply use water and mild detergent. Please do not use any other cleansing products, since they might affect the surface of the cabinet.

Convenient layout for game player The layout of the control panel includes a top coin entry for the customer's ease of inserting coins. In addition, the 25” monitor appears to be larger due to the monitor bezel; it appears to be more like a 30-33” monitor.

Page 5

Third Printing August 1996.The contents of the product herein described are subject to change without notice

GENERAL PRECAUTIONS

Follow Instructions- All operating and-use instructions should-be followed: - ~~~ Aitachments- Do not use attachments not recommended by the product manufacturer as they may cause hazards

Accessories- Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.

Moving the Product- This product should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product to overturn. Ventilation- Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating; and these openings must not be blocked or covered. The openings should never be blocked by placing the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. Power Sources- This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization- This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. Power Cord Protection- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Overloading- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result ina risk of fire or electric shock.

Object and Liquid Entry- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing- Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service- Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

  • When the power-supply cord or plug is damaged.
  • [f liquid has been spilled, or objects have fallen into the product.
  • If the product has been exposed to rain or water.
  • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. An improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
  • If the product has been dropped or damaged in any way.
  • When the product exhibits a distinct change in performance; this indicates a need for service. Replacement Parts- When replacement parts are required, be sure the service technician has used replacements parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitu-
Page 6

tions may result in fire, electric shock, or other hazards. Safety Check- Upon completion of any service or repairs to this product, ask the service technician to perform satety checks to determine that the product is in proper operating condition. Heat- The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Monitor Frequency- The applicable frequency for the monitor compatible with the ST-V Board is 15 kHz. The ST-V Board can not be used fora cabinet which employs a monitor or projection display which has 24 kHz frequency. Cleaning- When cleaning the monitor glass, use a soft cloth. Do not apply chemicals such as benzine, thinner, etc. Lithium Battery- Dispose of batteries only in accordance with the battery manufacturer’s recommendations. Do not dispose in an open flame condition, since the battery may explode. Base Plate- The diamond tread base plate must be attached to the cabinet at all times. The stability of the cabinet

depends on this base plate.

hesationer eA ation \S me machine, DO NOT install it outside. To ensure proper usage, avoid installing indoors in the places mentioned below:

  • Places subject to rain/water leakage, or condensation due to humidity. ¢ In close proximity to a potential wet area. ¢ Locations receiving direct sunlight.
  • Places close to heating units or hot air. *In the vicinity of highly inflammable/volatile chemicals or hazardous matter.
  • Sloped surfaces. « In the vicinity of anti-disaster facilities such as fire exits and fire extinguishers
  • Places subject to any type of violent impact. ¢ Dusty places.

Installation Precautions

¢ Verify the amperage of the branch circuit outlet before plugging in the power plug. Do not overload the circuit.

¢ Avoid using an extension cord. If one is required, use an extension cord of type SJT, 16/3 AWG rated min. 120 Vac, 7A. ¢ Moving this unit requires a minimum clearance (of doors, etc.) of 32” (W) by 77” (H).

  • For the operation of this machine, secure a minimum area of 32” (W) by 42”(D).
Page 7

SPECIFICATIONS

DIMENSIONS

WIDTH

DEPTH

HEIGHT

WEIGHT

POWER, MAXIMUM CURRENT

ELECTRICAL RATINGS

MONITOR

BASE PLATE

Regulatory Approvals

SHIPPING NET

36” 32”

42” 40.6”

79” 76.54”

220 Ibs.

360 Watts

120VAC, 60Hz, 3A, 360 W

25”

31.25 (W) x 34.5 (D)

This game has been tested and found to comply with the Federal Communications Commission.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This game has been tested and listed by Underwriters Laboratories, Inc., to ANSI/UL22.

Accessories

When transporting the machine, make sure that the parts listed in this Table are supplied.

PART NUMBER Qty. oN OF ON DESCRIPTION Key- Coin vault door Key- Control Panel

Key- Rear Service Door Service Manual

Page 8
  • Name and Position of On-Board Connectors, Switches, Etc.
  • In the case where the cabinet has neither the Test button nor Service button, utilize the Push SW which is on the Main Board (SW1: Test button SW2: Service button). For adjusting the sound volume, use the volume control in the control panel or use the on-board RV-1.

7 3.21 8 os Os Sot Teese 5 one ee Cots ="] a] e

BA okt | 1 is

CHES oma cake (Ri _ovig__evsz | A ml 28 ce) CP

JAMMA (S6P, P=3.96 mm) CN25 (JST NH SP) RESERVED OUTPUT 4bit CN19 (JST NH 12P) A/D INPUT 8 ch. CN22 (JST NH 3P) LIGHT GUN TRIGGER CN 32 (JST NH 9P) EXTENSION |/O 8bit CN24 (JST NH 4P) AUDIO LINK OUTPUT CN18 (JST NH 6P) SERIAL COMMUNICATION CN21 (JST NH 11P) EXTENSION 1/0 8bit CN20 (JST NH 10P) EXTENSION INPUT 8 bit

CAUTION Ithough a connector similar to the one used for SEGA’s SYSTEM 32 is used for the ST-V BD N24 audio output, the pin assignments are different. When using the ST-V Board for the EGALO 50 DX, SD3, and SUPER MEGALO 2 Cabinets, make sure that the AUDIO OUT IN/OFF Switch is OFF. Also, do not connect the 4P Connectors from the Cabinet to CN24. therwise, ST-V or the cabinet may be damaged.
Page 9
  • Monitor Direction, Horizontal Frequency

MONITOR HORIZONTAL. HORIZONTAL FREQUENCY 15.7 kHz

  • Coin Assignments and Coin Port

Setting the Coin Chute Type (COMMON, INDIVIDUAL)

COMMON (Initialization) Use for the type of Cabinet whose coin acceptance is a common type for multiple players. Coins inserted by each player are handled as common credits. In spite of Cabinet Type setting (or the number of players) COIN1 and COIN 2 coin ports are used, which respectively correspond to NO. 16, 56P Connector and NO. T, 56P Connector. COIN/CREDIT setting can be set for COIN 1 port and COIN 2 port separately.

INDIVIDUAL Used for the type of cabinet which has a coin chute for each player, with each coin chute being able to accept coins. Coins inserted by each player are handled as that player’s credits. The relationship between the cabinet type setting and the coin port is shown in the following table.

Note that the COIN/CREDIT setting applies in common to each port.
CABINET TYPEPLAYERST-V COINPORTSYSTEM 32 COIN PORT
1P1PCOIN 1 (S6P,16)COIN1
ap1PCOIN 1 (S6P, 16) COIN2
2PCOIN 2 (86P,7)COIN1
3P1PCOIN 1 (56P,16)COIN3

2P COIN 2 (56P,7) . COIN2

3PCOIN 3 (56P,25)COIN1
4P1PCOIN 1 (66P,16)COIN4
2pCOIN 2 (56P, T)COINS

3P COIN 3 (S6P, 25) COIN2

a_COIN 4 (56P, c)_COIN4_

For example, neither COIN 3 port nor COIN 4 port can be used for the 2P cabinet type. The <3P COIN> and <4 COIN> of the ST-V Board respectively correspond to NO. 25 and NO. ¢ of the 56P Connector. Connect them as applicable. Should any button on the Control Panel be wired, be sure to remove the wiring, Cabinet Type and Coin Chute Type setting changes can be made in the TEST mode. Refer to

  • System Assignments (page 18).
Page 10
  • Control Panel and Board /0
  • 56P Connector (JAMMA) The following < > refers to the Coin Setting set to “INDIVIDUAL” PIN ASSIGNMENT (JAMMA)
COMPONENT SIDE—... ... SOLDERSIDE
GND1.A_ GND
GND§ 2.B.__- GND

+5V 3 iV

+5V4:OOD+5V
(NOTUSED)5_—___(NOT USED)
+12V00«OBEF+12V
(NOT USED)7:H(NOT USED)
COINMETER18J__. COIN METER 2
(NOT USED)3°_k___(NOT USED)
SPEAKER (+)1.0.LSPEAKER (-)
(NOT USED)11:M_(NOT USED)
RED12NGREEN
BLUE13PSYNC.
GND (SYNC.)14RSERVICE
TEST15.s_ (NOT USED)
<1PCOIN> COIN116 ~TCOIN 2 <2P COIN>
AP START17.uU__, 2P START
1PUP18v2P UP
1P DOWN13Ww2P DOWN
1PLEFT20x2P LEFT
1P RIGHT21.Y2P RIGHT
1PSW122,Z__2Pswi
1PSW223a2P Sw2
1PSW324ob2P SW3
<3P COIN> (NOT USED)25c(NOT USED)<4P COIN>
(GAME SELECT)26_qd(PAUSE)
GND27.eGND
GND28tGND

56P P=3.96 mm

  • GAME SELECT (Pin NO. 26, 56P connector) iad the Multi-Cartridge mode is used. In the case where the cabinet has a button which allows the player to select the desired game, wire NO. 26 pin. When using SELECT button, change the setting in the TEST mode accordingly
  • PAUSE (PIN NO. d, 56P connector) used for photographing on-screen image. Connect up GRD and Pin NO. d to have a PAUSE function. Normally, these should not be wired.
Page 11

INSTALLING & REMOVING THE CARTRIDGE.INSTALLING THE BOARD

When installing and removing a Cartridge, or installing the ST-V Board, ensure that the Cabinet’s main power is OFF. Completely insert the Game Cartridge vertically, with the back side facing away from the Board.

CAUTION The following procedures should be done by service personnel only When removing the Cartridge: do not try to pull it up with the Holder still remaining in a secured status. Slightly incline the Holder, and bend the catch toward the outside. Applying excessive force to the Board may cause damage such as soldering defects, etc. When installing the Board in the Cabinet: secure all the “L” LOCKS on the outer portions of the board and the Board Brackets on the periphery of the Cartridge Holder to the wood base by using the wood screws which come with the Kit. When changing the Marquee graphics: (1) remove the mirror clips and lift out glass (2) Pee! off the old graphics. (3) Position the new graphics behind the glass and secure with transparent tape. (4) Reinstall marquee glass using mirror clips. When changing the Control Panel overlay: (1) Open control panel. (2) Remove buttons and joystick.(3) Peel off old overlay. (4) replace with new overlay. (5) Reinstall buttons and joystick.
  • Close conirol panel.
Page 12

TEST MODE

A) Normal Test Mode

This operation checks to see that the functioning of the game board is accurate, makes monitor color adjustments, and allows for COIN ASSIGNMENTS/GAME ASSIGNMENTS setting adjustments. Selection of Test Items

  • After the power is turned ON, push the TEST button to have the following TEST TEM MENU appear on the screen. ST-V TEST MENU -

MEMORY TEST C.R.T. TEST INPUT TEST. CLOCK ADJUSTMENTS SYSTEM ASSIGNMENTS COIN ASSIGNMENTS SYSTEM BOOKKEEPING BACKUP DATA CLEAR EACH GAME TEST [CARTRIDGE SPECIFIC ] ] [ ] [ ] *1

‘——>_ EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

  • By pushing the SERVICE button, bring the arrow mark “—>” to the desired item and press the TEST button.
  • When the test has been completed, bring “—>” to EXIT and press the TEST button to have the game mode return to the screen.

*1:[ ] Below EACH GAME TEST displays the name of each game which is connected to the Board.

AUTION

ie SYSTEM ASSIGNMENTS and COIN ASSIGNMENTS settings are implemented only after ‘ou have EXITed the menu mode. Therefore, if the power is turned OFF before EXITING, the ettings made are ineffective.

Page 13

a

MEMORY TEST

PAGE 1/2 “BOM Ic8 GOCD = RAM ot

Ic9 GOOD1C10 GOODC11 GOOD
ic24 GOODIC25 GOOD|c27 GOOD
1C29 GOODIC30 GOOD1C33 GOOD

1C34 GOOD 1C37 GOOD

PRESS TEST BUTTON TO NEXT

Ne

PAGE 2/2 *™* CARTRIDGE ROM CHECK*”" CART #1

IC1 GOOD[C2 GOODIC3 GOODICc4 GOOD

IC5 GOOD C6 GOOD (C13 GOOD

CART#2.;
IC1 GOOD 12 GOOD[C3 GOOD‘Ic4 GOOD
ICs GOODIC’ GOODC13 GOOD

CART #3

IC1 GOOD IC2 GOODIc3 GOODIc4 GOOD
ICS GOODICs GOODC13 GOOD

CARTH4

IC1 GOOD IC2 GOODIC3 GOODic4 GooD
IC5 GOOD1C6 GOOD!C13 GOOD

\ PRESS TEST BUTTON 10 EXIT wy,

  • MEMORY TEST

First, check if MEMORY IC functioning on the Main Board is accurate. If the IC is in good operating condition, “GOOD” will be indicated. If there exists any malfunctioning of the ICs, “BAD” will be indicated.

After the test has been completed, press the TEST button to cause the Cartridge MEMORY TEST to be performed.

The following shows this display when four Cartridges are inserted in the Board.

Note that the display of the slot in which the Cartridge is not inserted will be omitted.

After the test has been completed, press the Test button to return to the Menu mode.

Page 14

/ CRT. TEST PAGE 1/2 1111111111222222222233

  • C.R.T. TEST 01234567890123456789012345678901

A) RGB Color Adjustment Screen White

This page allows for checking the monitor Red color adjustment. Each of the R (red) G (green) B (Blue) colors Greek is darkest at the left-hand end and becomes brighter in 31 gradations towards the right- Bi hand end. The monitor brightness is satis- ue factory if the white color bar is black at the left-hand end and white at the right-hand SERVICE BUTTON TO OTHER PAGE

end. Ne TEST BUTTON TO RETURN

C.R.T TEST PAGE 2/2

B) Monitor Size Adjustment Screen This page allows for monitor size to be checked.

Make adjustments in a manner so that the checkered portions for checking do not go beyond the screen. Press the TEST button to Seana eae eee eee

proceed to the next page. f TEST BUTTON TO RETURN

Page 15

\NPUT TEST 1P. 2P

START OF OF

COINCHUTE = #1-OFF #2-OFF

TEST-OFF SERVICE-OFF

PRESS TEST BUTTON TO EXIT Each time the SERVICE button is pressed, the above color bar screen (1/2) and checkered screen (2/2) alternate. Press the TEST button to have MENU return to the screen.

  • INPUT TEST

This test displays the state of the START button, COIN SW, TEST button, SERVICE button, etc., which are used in common for each game. Depending on the contents of Cabinet setting, the screen display varies

i INPUT TEST

1P PPP START OF OF OF oF

COIN OF OF OP OF

TEST-OFF SERVICE-OFF

SELECT-OFF

PRESS TEST BUTTON TO EXIT Ne somewhat (refer to examples below). If the switch/button goes ON (from OFF) when activated, it is satisfactory.

EXAMPLE 1) CABINET TYPE 2 GAME SELECT NQ COIN CHUTE TYPE Common

EXAMPLE 2) CABINET TYPE 4P GAME SELECT YES COIN CHUTE TYPE Individual

Note that the INPUT TEST except for START (Joystick, push button, etc.) should be performed in the EACH GAME TEST mode.

Press the TEST button to have the MENU return to the screen.

Page 16
  • CLOCK ADJUSTMENT

This allows for setting the date (day/ CLOCK ADJUSTMENTS month/year) and time on the Main Board. O1WJAN/1995 (SUN) 23:59:59 On-BD present time

  • Each time the SERVICE button is pressed, the setting position moves sequentially in order of TIME set by the user (day /month/ year/day of the week/hour/minute, SET and EXIT. Seconds are fixed at 00. Press the 28/FEB/1995 (TUE) 19:00:00 Time set by user

SET Applies the time set by the user to on-BD present time

TEST button at the desired position to set ~> EXIT Return to MENU mode the time.

  • Ret

2) Bring the arrow to SET and press the SELECT WITH SERVICE BUTTON

TEST button to apply the time set by the user on the On-BD present time. AND PRESS WITH TEST BUTTON

  • After the time setting is finished, bring the arrow to EXIT and press the TEST button to have the MENU mode return to the screen.

28 / FEB / 1995 (TUE)

day month year (day of week)

10:00:00

HMS

NOTE

When setting the date, it is possible to set Feb. 30 or Feb. 31. In these cases, however, accurate functioning would not be maintained thereafter. Therefore, be very careful of this point.

Page 17

/ SYSTEM ASSIGNMENTS

CABINET TYPE 2aP

SELECT BUTTON ND

ADVERTISE SELECT ON

GAME SELECT TIME 10 [SEC]

ST-V LOGO OF

ADVERTISE SOUND ON

ALONE/MULTI MULTI

> EXIT

SELECT WITH SERVICE BUTTON AND PRESS WITH TEST BUTTON NS Multi-Cartridge Mode

( SYSTEM ASSIGNMENTS CABINET TYPE. ap

ADVERTISE SOUND ON

ALONE/MULTI ALONE

-> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON \ Stand Aiane Mode

  • SYSTEM ASSIGNMENTS

In this mode, various cabinet and board settings can be changed.

  • Press the SERVICE button to the arrow “—>” and bring it to the desired item.
  • Press the TEST button to change the setting.
  • After the setting is finished, bring “—>” to EXIT and press the TEST button.

(A) Cabinet Type (1P, 2P, 3P, 4P) Set to the applicable one from the 4 types. (B) Select Button (NO, YES) Set to YES or NO depending on whether the cabinet has the SELECT button.

YES Set to this if the cabinet has the SELECT button. For wiring, refer to Control Panel and Board I/O on Page 11. NO | Set to this if the cabinet does not have the SELECT button. Buttons on the CONTROL PANEL (except for the START button) can be utilized in lieu of the SE- LECT button.

(C) Advertise Select (ON, OFF) Determines whether ADVERTISE (during advertise) can be skipped with the SELECT button.

ON _ Set to this when skipping ADVER- TISE (during advertise) to proceed toa desired game.

OFF The game is selected when credits to start are available.

Page 18

(D) ST-V Logo (ON, OFF) This determines whether the ST-V LOGO is displayed or not during ADVERTISE in the Multi- Cartridge mode.

(E) Advertise Sound (ON, OFF) Determines whether ADVERTISE SOUND is to be emitted or not.

(F) Alone/Multi (ALONE/MULTI) This allows STAND ALONE (ALONE) mode or MULTI-CARTRIDGE (MULTI) mode to be set. In the STAND ALONE mode, items regarding MULTI-CARTRIDGE made are not displayed (refer to screen shots on the preceding page).

AUTION 1: epending on the contents of SYSTEM ASSIGNMENTS settings, the game may not start up. efer to the applicable Game Service Manual.

AUTION 2: hanging the contents of (A) CABINET TYPE or (G) ALONE/MULTI results in clearing the ‘contents of SYSTEM BOOKKEEPING and the BOOKKEEPING of each game.

Game settings such as difficulty levels, etc. are performed in EACH GAME TEST, please refer to the individual Game Service Manuals

Page 19

B) Factory Test Mode

This mode is intended for the development of games which employ the ST-V Board, and for Factory Hardware Check. Unless instructions are specifically given in an applicable Manual elsewhere, do not use this mode. When so required, however, enter the mode by turning the power on while keeping the TEST button pressed down. If the mode is used without specific instructions, normal operations can not be guaranteed. (During test the COIN METER may suddenly function sometimes).

System Configuration This allows for environmental setting at the development stage. For initialization, refer to the following: BOOTROM ver 1.10 ST-V TEST MENU (in Factory) (— >»

--> CONTINUOUS HARDWARE TEST MEMORY CHECK C.R.T CHECK VDP1VDP2 CHECK 1/0 (lOGA) CHECK VO (SMPC) CHECK SOUND CHECK EEPROM CHECK DUAL - CPU CHECK CLK-CHANGE CHECK

SIMM CHECK RS-232C CHECK

SCSI-2 CHECK

SYSTEM CONFIGURATION

IF YOU WANT TO EXIT PLEASE POWER ON AGAIN

SYSTEM CONFIGURATION

DEVELOP - MODE NO SCSI - ID 0} SIMM - ALLOCATE CART - AREA scsl UNUSE SCS! - BOOT NON-BOOT HOST - TYPE PC ST-V LOGO OFF) ALONE/MULTI ALONE

--> EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON \

Page 20

WIRING FOR THE BOARD

A) 2-PLAYER SIMULTANEOUS PLAY, 6-BUTTON SPECIFICATIONS (2L12B)

WIRE HARNESS used: WIRE HARNESS ST-V EXT8B (PART No. 600-6558-05) The GND wire of this wire harness is black, so be careful of this point. SW1-3 correspond to JAMMA connector. Wire SW4, SW5 and SW6. No wiring is required for yellow and gray wires which come from Pin Nos. 6 & 10.

VIRE HARNESS

Page 21

B) 3-4 PLAYER SIMULTANEOUS PLAY, 3-BUTTON SPECIFICATIONS (3L9B, 4L12B)

WIRE HARNESS used: — 3 PLAYER; WIRE HARNESS ST-V EXT3P (PART No. 600-6558-07)

4 PLAYER; WIRE HARNESS ST-V EXT 8B (PART No. 600-6558-05)

The GND wire of this WIRE HARNESS is black, so be careful of this point. 1P and 2P correspond to JAMMA Connector. Wire for 3P and 4P.

Page 22

Retum Cup =>

Cash Box Door

Page 23

Maunuee Box —_P-

Handle ———_

Mom tor Access Plate —_—_P-

20 and Breaker

Page 24

COIN MECHANISM

The Titan Cabinet is equipped with a top-mounted control panel coin mechanism. The top-mount mechanism is preferred by players, for the drop-in convenience and faster coin acceptance for unintertupted game play.

REPLACING THE COIN MECHANISM

The top-mounted coin mechanism holds a standard coin acceptor. The mechanism is replaced by unlocking the two locks beneath the control panel, and opening the control panel top. The mechanism is removed in the same way as in a standard over-under coin door.

To speed replacement of malfunctioning coin mechs, new coin acceptors should be pre-tested at the technicians bench, and swapped out with the defective piece. Pre-testing all coin mechanisms is recommended to minimize game down-time.

COIN METER

The coin meter is located on the switch unit, in the right side of the control panel. Release the control panel locks, located in the rear corners of the control panel underside, and open the control panel top to view the coin meter. Use the TEST button to perform bookkeeping functions at the time of coin collection and meter checks.

COIN COLLECTION

Coin collection is performed by opening the lower mini-door on the cabinet to access the cash box. Perform bookkeeping functions by accessing the switch unit in the control panel at this time.

Page 25

Install Unit per Installation Instructions

Repiace Power Supply a Unit No

PowerCord

No. t Connected? \s Switch ON?

Connect PowerCord

  • & Tur on Switch

Contact Sega Technical Service Enjoy the Game

Marquee Lamp On?

Circuit Breaker OK?

Reset Circuit Breaker x —~—— 9

TROUBLESHOOTING CHART

Page 26

PARTS LIST

ITEM NO.

Oo MN AH F WN

N QD OU B WN FO

NNN = oe nF oOo @ QTY.

PPNNNH

ee = PART NO. STVV-00010

STVV-00256

STVV-00420

STVV-00421

STVV-00330

STVV-00423

STVV-00424

STVV-00422

STVV-00333

STVV-00334

STVV-00066

STVV-00067

STVV-00068

STVV-00081

STVV-00082

STVV-00011

STVV-00012

STVV-00013

STVV-00014

STVV-0025:

STVV-00019

STVV-00086

STVV-00087

STVV-00020 DESCRIPTION Titan,Generic

Schematic

Assembly Carton Carton Sleeve

Artwork Sleeve

Top Tray for Carton

Bottom Tray for Carton Carton, Die Cut insert

Front Insert for Carton

Back Insert for Carton

Game Bag Manual Bag Shipping Envelope FCC/UL Label

Serial Number Label

Titan Kit Top Assembly Cabinet Assembly Monitor Cabinet Body Coin Door Cabinet Panel

Spacer 4’x4’ Steel Tread Plate

Cabinet Bezel

4” Shielded Speaker Speaker Grille MainHarness

Coin Chute

Cabinet Kickplate 25” Color Monitor, Std. Resolution

Black Fiberglass Screen Marquee Bracket

Page 27

STEM NO. Qty. PART NO.

STVV-00022

STVV-00023

STVV-00059

STVV-00060

STVV-00061

STVV-00072

STVV-00078

STVV-00254

STVV-00255

STVV-00323

STVV-00324

STVV-00030

STVV-00088

STVV-00089

STVV-00031

STVV-00032

STVV-00033

STVV-00257

STVV-00258

STVV-00259

STVV-00253

STVV-00090

STVV-00091

STVV-00035

STVV-00036

STVV-00057

STVV-00038

STVV-00092

STVV-00095

STVV-00098 DESCRIPTION

Upper Monitor Mounting Bracket

Lower Monitor Mounting Bracket Monitor Mounting Bushing Monitor Mounting Collar

Monitor Mounting Spacer Ground Harness

AC Harness

Control Panel Harness

Hinge Harness 1” Tie Wrap Pad

6” White Tie Wrap

Home Ground Sheetmetal Bracket

Coin Box Door

Coin Box

System Label

Marquee Housing Subassembly Marquee Housing Fluorescent Lamp Fixture

18” Fluorescent Lamp, 15W

Lamp Stay Fluorescent Fixture Harness

Grommet

Orange Wire Nut

Control Housing Subassembly Bottom Control Housing Control Panel Service Hinge

Control Lock Catch

Switch, PB, 28VDC, .5A w/ nut and washer

Volume Control, 100 Ohm w/ nut & washer

Volume Control Knob

Page 28

ITEM NO. QTY.

Bee ee Ne ee wD eee ee PART NO.

STVV-00297

STVV-00290

STVV-00291

STVV-00292

STVV-00293

STVV-00298

STVV-00244

STVV-00041

STVV-00042

STVV-00044

STVYV-00045

STVV-00046

STVV-00047

STVV-00048

STVV-00099 DESCRIPTION

Coin Meter, 5 Volt

Test Label

Service Label

Volume Label

Coinage Label Straight Cam Assembly Lock & Key Control Panel Lanyard

Cabinet Door Assembly Cabinet Back Door

Panel Support Lanyard Power Supply Assembly Marquee Bezel Subassembly Marquee Bezel

Tempered Glass Marquee Mirror Clip

Page 29

HARDWARE and FASTENERS

ITEM NO. DESCRIPTION

80 Allen Wrench

81 Carriage Bolt, 10-24 x 1”, Black Zinc 82 Kep Nut, 10-24, Clear Zinc 83 Carriage Bolt, 1/4-20 x 1-1/2”,Clear 84 Kep Nut, 1/4-20, Clear Zinc 85 Type ‘A’ Screw, #6-32 x 3/8”, Slf-tpg. Button Head Allen, Black Nickel

86 Type ‘A’ Screw, #10-24 x 1/2, Slf-tpg. Pan Head Phillips, Clear Zinc 87 Type ‘A’ Screw, #1/4-20 x 3/4, Slf-tpg, Pan Head Phillips, Clear Zinc 88 Type ‘A’ Screw, #1/4-20 x 3/4, Slf-tpg, Pan Head Phillips, Black Nickel 89 Type ‘A’ Screw, #10-24 x 1/2, Slf-tpg, Pan Head Phillips, Clear Zinc 30 Type ‘A’ Screw, #10-24 x 1/2, Slf-tpg., Pan Head Phillips, Clear Zinc 91 Glt Washer, #10-24, Clear Zinc

92 Type ‘A’ Screw, #10-24 x 1/2, Slf-tpg., Pan Head Phillips, Clear Zine 93 Type ‘A’ Screw, #6-32 x 1/2, Slf-tpg., Pan Head Phillips, Clear Zine 94 Type ‘A’ Screw, 1/4-20 x 1,Sl&tpg., Pan Head Phillips, Clear Zinc 95 Type ‘A’ Screw, 1/4-20 x 3/4, Sif-tpg., Button Head Allen, Black Nickel

96 Flat Washer, #10, Clear Zinc 97 Machine Screw, #1/4-20 x 1/2 BH Head Allen, Black Zinc

98 Type ‘A’ Screw, #8-32 x 3/4, Slf-tpg., Par Head Phillips, Clear Zinc 99 Machine Screw, #10-24 x 3/4, Button Head Allen, Black Nickel

100 Type ‘A’ Screw, #10-24 x 3/4”, Slf-tpg., Ms Allen, Black Nickel 101 Type ‘A’ Screw, #10-24 x 1/2, Sif-tpg., Clear Zinc LOCATION

Back Door

Joystick to Top Control Panel Joystick to Top Control Panel Bottom Control Housing to Cabinet Panel Coin Door Bottom Control Housing to Cabinet Panel Coin Door

Speaker Grille to Monitor Body Cabinet Control Panel Hinge to Bottom Control Housing and Top Control Panel

Monitor Body Cabinet to Marquee Housing

Marquee Bracket to Monitor Body Cabinet

Coin Chute to Cabinet Panel Coin Door

Panel Support Lanyard to Monitor Body Cabinet Pane} Support Lanyard to Monitor Body Cabinet

Fluorescent Lamp & Lamp Fixture to Marquee Housing

Lamp Ground Screw Upper Monitor Mounting Bracket (27) & Lower Monitor Mounting Bracket to Monitor Body Cabinet

Monitor Body Cabinet to Cabinet Panel Coin Door Panel Support Lanyard to Cabinet Door

Cabinet Kickplate to Monitor Body Cabinet

Tempered Glass Marquee to Marquee Bezel

Marquee Bezel to Marquee Housing

Cabinet Bezel to Monitor Body Cabinet

4” Shielded Speaker to Cabinet Bezel

Page 30

ITEM NO.

lll DESCRIPTION

Screw, #6-32 x 1/2, Small Head Phillips, Clear Zinc

Carriage Screw, #10-24 x 1-1/4”, Black Zinc

Kep Nut, #1/4-20, Clear Zinc

Carriage Bolt, 1/2-13 x2-1/2, Clr Zine

Fender Washer, 1/2”, Clear Zinc

Lock. Washer, 1/2”, Clear Zinc

Nut, 1/2-13, Clear Zinc

Screw, #10-32 x 1-1/2, MS, AH, BK, BH

Hex Insert, #10-32

Hex Insert, 1/4-20

Type ‘A’ Screw, #10-24 x 1/2, Slftpg., Pan Head Phillips, Clear Zinc Type ‘A’ Screw, #10-24 x 1/2, Slf-tpg., Pan Head Phillips, Clear Zinc

Type ‘A’ Screw, #10-24 x 1/2, Slftpg., Pan Head Phillips, Clear Zinc Type ‘A’ Screw, #10-24 x 1/2, SlE-tpg., Pan Head Phillips, Clear Zinc

Type ‘A’ Screw, #10-24 x 1/2, Slf-tpg., Pan Head Phillips, Clear Zinc

Type ‘A’ Screw, #10-24 x 1/2, Slf-tpg., Pan Head Phillips, Clear Zinc

Type ‘A’ Screw, #6-32 x 1/2, Slf-tpg., Pan Head Phillips, Clear Zinc

Type ‘A’ Screw, #10-24 x 1/2, Sif-tpg., Pan Head Phillips, Clear Zinc

Carriage Bolt, #10-24 x 1”, Black Zinc

Kep Nut, #10-24, Clear Zinc

Flat Washer, #10, Clear Zinc

Kep Nut, #8-32, Clear Zinc

Screw, #4-40, Flat Head Phillips, Clr Znc

Flat Washer, #10, Clear Zinc

Lock Washer, #10, Clear Zinc

Kep Nut, #10-24, Clear Zinc

Hex Insert, #10-32 LOCATION

Titan PCB Assembly to Particle Board

Cabinet Door to Particle Board

Upper Monitor Mounting Bracket & Lower Monitor Mounting Bracket to 25” Color Monitor, Standard Res.

Base to Cabinet Bottom

Base to Cabinet Bottom

Base to Cabinet Bottom

Base to Cabinet Bottom

Back Door to Cabinet

Back Door Insert

Kick Panel Insert

Power Supply to Cabinet Base

Hinge to Upper Control Panel

Hinge to Lower Control Panel

Ground Strip to Cabinet

Lanyard to Upper Control Panel

Lanyard to Lower Control Panel

Monitor Remote to Control Panel

Control Panel Lock Catch

Coin Mechanism to Control Panel

Coin Mechanism to Control Panel

Coin Mechanism to Control Panel

Ground Strip

Coin Meter to Test Service Bracket

Back Door to Ground Harness

Back Door to Ground Harness

Back Door to Wooden Plate

Lower Control Panel

Page 31

SEGA has made every effort to ensure that this manual is accurate. If you find any errors or omissions, or have other comments on the ST-V manual, please write them below, detach, and deliver this page by FAX or mail to:

SEGA ENTERPRISES INC. (USA) ATTN: Engineering Dept. 45133 Industrial Drive

Fremont, CA 94538 USA

FAX: (415) 802-1754

Comments:

Optional Identification Information:

Name:

Company: Address:

City, State, Zip:_ Phone: _

PAX:

Page 32

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 33

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 34

Sega Enterprises, Inc. (USA) 45133 Industrial Drive

Fremont, CA

94538 415-802-1750 phone 415-802-1754 fax