Puzzle Bobble 2
Puzzle Bobble 2 (Ver 2.3O 1995/07/31) (Taito Corporation Japan, 1995) · Manual · 9 pages · 12 sections · original scan
ThITO ©TAITO CORP. 1995
INSTRUCTION MANUAL
Arcadiabay
G2500807A
- Cautions
- Prior to executing the alternation work, make sure to turn OFF the power. ¢ Use a JAMMA standard connector (56 pin edge connector having 3.96 mm pitch) for the edge connector of the mother PC board. ¢ After turning on the power, adjust the power supplied to the mother PC board that its level becomes the rated voltage at the mother PC board connector section After the modification ,;when "PUSH TEST SWITCH" appears on the screen,press TEST SWITCH on the
mother P.C.Board without turning off the power. [Connection of mother PC board and ROM PC board]
- Connect the ROM PC board on the mother PC board while referring the figure below.
- Be careful about direction of the ROM PC board
[Specifications for the control panel]
- Two sets of four dimensional joystick lever.
Gs
- Two sets of one button switches
[Mother PC board] “M2” connector “3P" connector “4P” connector (soldered side) “S" connector
= ' 7 “G" connector __ : —_ UP 3 nr “Z" connector > “SI” connector i) { l WIN
- Set the JP3 to the “JOYSTICK” side.
- This PC board has no dip switches. For selecting play fee and game contents, set at the test mode.
*Caution: There is a dial on the PC board which is not for volume loudness adjustment. This dial is correctly adjusted at delivery. Never touch it
[Connector terminal list]
By connecting two speakers to the S connector as shown below, you can get realistic stereo sound.
“S" connector [In the case of applying a stereo system)
“S" connector [In the case of applying a monaural system]
[SPEAKER] | ase [s|_eno f¢[— eno]
[Description of test mode]
[Test mode]
- Press the test switch on the PC mother board (or connect a line of the test switch in the G connector No. 15 with the GND), the game mode halts and the monitor changes to “Test mode.”
- When you enter the test mode while having credits, the machine clears the credits.
- Move the cursor vertically by shifting the 1P side lever up and down, and press the "FIRE"or’SELECT" button. The machine initiates the test of the selected item
TEST MODE MAIN MENU
MONITOR TEST
SWITCH — TEST
SOUND: TEST
CONFIGURATION FACTORY SETTING EXIT
ReKKKKK KR KKKKEK VERKK 1995 / ke / RRR
(Test mode main menu)
(Monitor test]
Cross hatch Select the monitor test and the cross hatch screen will appear on the monitor.
Color bar
- Check hue of image.
- Each press of the 1P side “FIRE * or "SELECT" button changes the display between the cross hatch screen and the color bar screen.
¢ PressTEST SWITCH on the P.C.Board ( or press 1P side “FIRE* and “SELECT™ button ) , the monitor will return to the main menu. [Switch test)
- This function checks the input of each switch.
SWITCH TEST
| SERVICE | : OFF | TILT | : OFF | ||
| COIN | A: | OFF | COIN | B | : OFF |
START — : OFF START — : OFF
| FIRE1 | : OFF | FIRE1 | : OFF |
| FIRE2 | =: OFF | FIRE2 | : OFF |
| : OFF | FIRES | =: OFF | |
| : OFF | UP | : OFF | |
| : OFF | DOWN — | : OFF | |
| : OFF | LEFT | : OFF |
: OFF RIGHT — : OFF PUSH TEST SWITCH TO MENU
¢ Tum ON a switch and when the corresponding display on the screen changes from “OFF” to “ON,” the switch is normal. ¢ Press TEST SWITCH on the P.C.Board ( or press 1P side "FIRE" and "SELECT" button), the monitor will return to the main menu.
[Sound test)
- This function adjusts the sound level during play of the game. Select a required item by shifting the 1P side lever up and down, and change the level by shifting the same lever left and right.
- Press the 1P side “FIRE” or "SELECT" button at the “SOUND NO." item, attractive sound a emit for your checking. + After selecting with the lever on the 1P side , and when the 1P side "SELECT" or "FIRE" button is pushed, the sound stops. “MAIN” , "SE" VOLUME: The former adjust the B.G.M. during playing, and the later adjusts the effect sound volume.The sound volume increases by turning the 1P side lever to the right, and it decreases by turning the 1P side lever to the left.
SOUND TEST
SOUND NO. :01 SOUND STOP
| MAIN | VOLUME :[______ | EE | (35) |
MIN MAX
| SE | VOLUME | :|__ [I (7F) |
EXIT
| SELECT | WITH | THE | LEVER |
| PUSH | 1P | SELECT | BUTTON |
- Select “EXIT” and the machine asks whether or not to write the set data as below. "YES" and "NO" can be changed by turnig the 1P side lever left and right. If you want to store the data just set, select “YES.” if you do not want to change the settings, select “NO.” Then press the 1P side "FIRE" or "SELECT" button.
SOUND TEST
| SAVE | MODIFIED | DATA |
ARE YOU SURE ?
(YES } NO
| SELECT | WITH | THE | LEVER |
| PUSH | 1P | SELECT | BUTTON |
[CONFIGURATION] This function sets the play fee and game contents. Select a required item by shifting the 1P side lever up and down, and change the contents by shifting the same lever left and right.
- For the contents of the configuration, see the next page.
CONFIGURATION GAME STYLE :0 (1P+2P )
MONITOR : NORMAL
ATTRACT SOUND: ON DIFFICULTY : NORMAL CONTINUE MODE : ON
| INTRUDE | PLAY | :ON | ||
| VS | CREDIT | iil | ||
| VS | ROUND | i3 | ||
| COIN—A | :1 | COIN | 1 | CREDIT |
COIN—B :1 COIN 2 CREDIT
EXIT
| SELECT | WITH | THE | LEVER |
| PUSH | 1P | SELECT | BUTTON |
¢ Select “EXIT” and the machine asks whether or not to write the set data as below. "YES" and "NO" can be changed by turnig the 1P side lever left and right. If you want to store the data just set, select “YES.” If you do not want to change the settings, select “NO.” Then press the 1P side "FIRE" or "SELECT" button.
CONFIGURATION
| SAVE | MODIFIED | DATA |
ARE YOU SURE ?
( YES } NO
| SELECT | WITH | THE | LEVER |
| PUSH | 1P | SELECT | BUTTON |
[Configuration list]
- Factory setting [COMMON SETTING] [FOR NORTH AMERICA] | *D(2P) 1COIN 1CREDI vs.crepitlL_—__]
| Senet ite | E (1P ONLY) | screor| —-— ICOIN 2CREDIT | |
| * NORMAL | *1COIN | * 1CREDIT | |
| MONITOR | INVERT | 2COINS | 2CREDITS |
PLAY 3COINS 3CREDITS
EASY DIFFICULTY * NORMAL
VERY HARD PRICE 4COINS 4CREDITS |_| screorrs 6CREDITS
| *ON | Cleve MODE [EXCEPT NORTH AMERICA]
| | | vesone | [ae | \vs.caeor| | +] 1COIN 1CREDIT | |
| vs.ROUND | | | #3 | #2 «| | [2 | __| Com 2creorr| |
| Ps | | | coN-A | [_¥1CcOIN | | *1CREDIT | |
2CREDITS | _3COINS | 3CREDITS 4CREDITS #1:The game ends when either 1Por 2P games one victory. | S5CREDITS
#2:The game ends when either 1Por 2P games two victory. rs 6CREDITS
#3:The game ends when either 1Por 2P games three victory. |COIN-B | _2coins | * 2CREDITS 3CREDITS 4CREDITS a a
G3500547A
WHEN ANY BUBBLE
DIRECTION OF BUBBLE LAUNCHER
| GOES OVER| | THE LINE, | | @e THE GAME © <" 1S OVER! r
ESSAI REBELS HE A HA EOI SE STOPS SSRN LINC IS SER ERAN ON
ALL SAME COLORED BUBBLES
HIT FIRST BY THIS STAR BUBBLE WILL BE ELIMINATED
BUBBLE WILL BE ELIMINATED.
_ METAL BUBBLE CAN =) ELIMINATE ALL BUBBLES. | BUBBLES CAN BE ELIMINATED |
BY PUTTING 3 OR MORE SAME EEE
COLORED BUBBLES TOGETHER. | SUMP MUR ol | BE ELIMINATED!
- THE MAXIMUM CREDITS FOR THIS GAME IS 9.