Space Fury (Aladdins Castle Memo Oct-16-1981)
Space Fury (revision C) (Sega, 1981) · Document · 1 pages · original scan
- Aladdinin Cantle’ Meno
October 16, 1981
TO: ALL MANAGERS
FROM: TECHNICAL SERVICE DEPARTMENT
RE: "SPACE FURY RECALL/MODIFICATION
We have been informed that there is a Problem with the new monitor modification.
R635 and R735 have been changed from 1.5 ohm 10W to 3 ohm 10W. The way they did this was to add a resistor in series with the original.
= - __Unfortunately, Gremlin has used the same approach we ' have come to know and expect from them. - oe
Instead of piggy-backing the resistors they mounted them in a inverted "v" configuration.
Because of this, one lead of the resistor can easily break, especially during the rough handling received during shipment.
If you receive a replacement monitor, please check these resistors for broken leads before powering up the game.
. We would like to extend our thanks to Walter "Butch" Spivey for telling us about this problem.
Thank you,
Jim Welter Technical Service Manager
Check for IW/5v breaks