CATHODE RAY TOMES

Indy 500 Service Bulletin All Models (Jan 26 1996)

INDY 500 Twin (Revision A, Newer) (Sega, 1995) · Service Bulletin · 1 pages · original scan

Page 1

SEGA January 26, 1996

Service Bulletin

"This Bull lies to all Models of In Game

Problem : Controls do not operate properly. The Steering and Accelerator/Brake functions are not correct.

Cause: Inputs are incorrectly calibrated.

Correction: Perform the " Volume Setting " test to properly set up the player controls. Follow the procedure listed below.

Enter the Test Mode by pressing the Test Button located on the Service Panel inside the upper coin door,

Use the Service button or the View Change Buttons ( Elther) to move the pointer "->" to the item marked " Volume Setting ". Press the Test button to enter this area ( See Figure 1 ).

Use elther the Service or View change buttons to move the pointer "->” to the item marked "Set & Exit".

Fully Depress the Accelerator & Brake pedals one at a time. You will need to press each pedal to Its’ full stop, and allow It to return to its’ normal "Rest" position.

Fully turn the Steering wheel Left & Right to each mechanical stop, Allow the Steering Wheel to return to its’ normal “Rest” position. ( See Figure 2).

Press the Test Button to store the settings and return to the Main Test Menu. Exit the menu by aligning the pointer with " Exit" and pressing the Test Button one final time.

Figure 1

VOLUME SETTING

SBITING WEXEL MAX 93(DF) MIN 93(26) NEW 93(93) GAS PEDAL MAX 78{CO) MIN 78(78) BRAKE PEDAL WAX 3E(C5) MIN 3E (32) <> CANCEL 6 EXIT SET 6 EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON