CATHODE RAY TOMES

Pacman Troubleshooting Logic Board Part 1

Puck Man (Japan, set 1) (Namco, 1980) · Troubleshooting · 26 pages · 20 sections · original scan

Page 1

MIDWAY’S

LASeMAN]

TROUBLE SHOOTING LOGIC BOARD

PART I

UP-RIGHT #932 MINI #934

MIDWAY MFG. CO.

PHONE:

PHONE: 7 Li 10750 WEST GRAND AVENUE: TOLL FREE

(312) 452-5200 / FRANICHI EARK, ILLINOIS 60131 800-323-7182

Page 2

+

Asensational, full color video game for 1 or 2 players that tickles vision and challenges reflexes. Adding to the fun are musical refrains, chomping and action sounds along with amusing cartoon shows between racks.

HIGH SCORE — Retained and displayed daily. > PLAYERS’ SCORE The player, using a single '——DOTS — 10 Points Each. handle control guides the = <. 2 POWER CAPSULE — PAC-MAN about the maze, 50 Points Each. scoring points by munching up the Dots in his path. Four Ghost Monsters—Inky, Blinky, Pinky and (GHOST MONSTERS

|_— PAC-MAN — The ‘main’ man. Clyde— chase after the PAC-MAN i trying to capture and deflate him. |_—-ESCAPE ‘Warp’ TUNNEL — % rp’ The PAC-MAN can counterattack 3 a Out one side~ reappear on other. by eating the big, Power Capsule that enables him to overpower the Monsters for additional score. After all the Dots are gobbled i—- BONUS FRUIT TARGET — Appear below Monster's Den twice during each rack. up, the screen is cleared, and PAC-MAi continues for another round. L.ch rack features a = special Fruit Target in the maze, how many times player has which if eaten, earns Bonus Points. _ cleared the screen of dots. Players start with three PAC-MEN. Screen cleared once. ‘An additional PAC-MAN is award- Screen cleared twice. ed for 10,000 points. Screen cleared 3 times. Screen cleared 4 times. Screen cleared 5 times. A ~~ GOR

1 = Quick, eat the flashing Power Capsule. Blinky Pinky Clyde

x

When the s PAC-MAN © \ powers up, ° DB the Monsters start to run away.

Points double for each Monster caught. iw

7] -

23”32”22"
74cm81.25 cm56cm#
73"2644"34”
185.5 cm.67.25cm86.25 cm

DISTRIBUTED BY:

MIDWAY MFG. CO. A BALLY COMPANY 10750 West Grand Avenue Franklin Park, Iinois 60131

For service information—call toll free 800-323-7182

Page 3

GENERAL INSTRUCTIONS FOR ‘“‘PAC-MAN”’

INSTALLATION

  • Remove shipping cleats located on bottom of cabinet.
  • Install four (4) provided leg levelers to bottom of cabinet and level cabinet.
  • The power is controlled by a switch located on top of the cabinet. Additional taps have been Provided on the transformer to compensate for fluctuating line voltage. LINE VOLTAGE SAFETY SWITCH A line voltage safety switch has been provided for your protection. It is located on the right rear side of the cabinet in the back door area. When the back door is removed, it opens the circuit to the line voltage. To restore power (when servicing), pull switch fully out. VOLUME CONTROL The volume control pot is located on the Game Logic Board (P.C. A082-91352-A000). This pot controls the volume of all sounds and may be varied as desired by rotating pot control. ADJUSTMENT SWITCHES Located on Game Logic Board (P.C. A082-91352-A000) and may be adjusted as indicated on separate instruction card in back box area.

GAME LOGIC P.C. AO82-91352—-A 000

ADJ. SW.

VOLUME CONTROL SL ane)

TO REMOVE CONTROL PANEL AND MONITOR DISPLAY GLASS . Open coin door. . Release two (2) clamps located below Control Panel on each side of cabinet. . Disconnect control panel jack. . Remove control panel. Remove monitor display glass.

CREDIT PUSH BUTTON SWITCH Located in cash box area and is readily accessible by opening coin door. This switch is provided as a test aid and awards one credit without advancing coin meter. Qeaona

M051-00932-A003

  • jo SSSSSSS—S——seessSSSSSSSSseeee
WARNING: This equipment Generates, Uses and can Radiate Radio Frequency Energy and if not installed and used in accordance with the Instructions Manual, may cause interference to Radio Communications. As temporarily permitted by Regulation it has not been tested for compliance to Subpart J or Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference. Operation of this equipment in a Residential Area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.
Page 4

METHOD OF PLAY

SW. #1 SW. #2

OFFON1 COIN1 PLAY
ONOFF1 COIN2 PLAY
OFFOFF2 COINS1 PLAY
ONONFREEPLAY

NUMBER OF PACKMEN PER GAME

SW. #3 SW. #4

ONON1 PACKMAN
OFFON2 PACKMEN
ONOFF3 PACKMEN
OFFOFF5 PACKMEN

BONUS PACKMEN

SW. #5 SW. #6

ONONBONUS PACKMAN AT 10,000
OFFONBONUS PACKMAN AT 15,000
ONOFFBONUS PACKMAN AT 20,000
OFFOFFNO BONUS

SW. #7 SW. #8

OFFOFFPLAY MODE
ONOFFRACK TEST
OFFONLOCKS PICTURE

MO51 -00932-A035

ELECTRICAL BULLETIN: FOR ALL APPARATUS COVERED BY THE CANADIAN STANDARDS ASSOCIATION (CSA) STANDARD C22.2 NO. 1, WHICH EMPLOYS A SUPPLY CORD TERMINATED WITH A POLARIZED 2-PRONG ATTACHMENT PLUG.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)PLUG WITH

AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR. UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

Page 5

GAME BOARD TEST Place test slide switch in ‘‘ON'' position. If game board is good, the following information will be displayed on the screen: OK Coin Adjustment Setting Bonus Adjustment Setting Number of PAC-MAN Per Game Setting Game Version

RAM/ROM TEST If any of the Rams or Roms are faulty, the following information will be displayed on the screen:

BAD ROM LOCATION CODE BAD RAM LOCATION CODE

Display Location Display Location

M-Rom-06EBad V Ram-04k
M-Rom-16FBad V Ram-14N
M-Rom-26HBad C Ram-04L
M-Rom-36JBad C Ram-14P

Bad W Ram-0 4M Bad W Ram-1 4R

CONTROL PANEL AND COIN SWITCH TEST

To verify operation of any switch, close switch in question. If switch is operating Properly, agame sound will emit when closure is made.

Caution: Be sure to return test switch to game mode when all tests are completed.

TO SERVICE MONITOR, GAME BOARD AND TRANSFORMER ASSY.

  • Open coin box door and release two (2) clamps indicated on sketch below.
  • Grasp monitor mounting panel at ‘‘A’’ and open as indicated in sketch below.
Caution: Due to the weight of the monitor extreme care must be exercised when opening cabinet for service.

Man

Page 6

10.

11.

12.

13.

14. PAC — MAN

TROUBLE SHOOTING LOGIC BOARD PC A082-91375-A000

CHECK +5VDC AT CPU AND ROMS.

RESET LINE PIN #26 OF CPU NORMALLY HIGH AND GOES LOW WITH RESET.

6MHZ CLOCK FREQUENCY AT PIN #13 OF 8-B AND 3MHZ AT PIN #6 OF CPU.

CHECK ROM TEST FOR A MEMORY FAILURE.

CHECK ALL ADDRESS AND DATA LINES AT CPU.

CHECK ALL ADDRESS AND DATA LINES AT 4-A AND 7-F COLOR PROMS.

CHECK ALL ADDRESS AND DATA LINES AT5-E AND 5-F CHARACTER ROMS.

WHEN CHARACTER ROM 5-E IS REMOVED GAME PLAYS BUT MAZE IS MISSING.

WHEN CHARACTER ROM 5-F IS REMOVED GAME PLAYS BUT PAC —- MAN AND GHOST MONSTERS ARE BLOCKS OF COLOR.

WHEN ALL PROGRAM ROMS ARE REMOVED THE SCREEN WILL BE ROWS OF BLUE DIAGONAL LINES.

CHECK SOUNDS AND SWITCHES USING TESTSWITCH.

SWITCHES #7 AND #8 MUST BE OFF FOR NORMAL GAME PLAY.

SWITCH #7 ON WILL TEST RACKS.

GOOD LUCK!

Page 7

PAC — MAN

TROUBLE SHOOTING PC A082-91375-A000

NOTE: All .C. trouble shooting information is with the I.C. removed from circuit.

POSITION CHIP POSSIBLE TROUBLE

1-E74LS161All Characters are at top of screen - Characters move

horizontally only.

1-F74LS283Lines and Squares entire screen - Effects Self Test.
1-H74LS283Horizontal lines across screen in color.
1-K74LS283No Sounds - Game plays normal.
IL74LS174Same as 1-K
1-M5623 (Prom)Same as 1 -K
1-NCD 4066Same as 1 -K
2A93415 (Ram)Effects Color of all Characters - Game plays.
2-B93415 (Ram)Same as 2-A
2-B93415 (Ram)Same as 2-A
2-D93415 (Ram)Effects Color of the Characters - Eyes only two

Characters.

2-E74LS161Characters top of screen - Characters move

horizontally-Effects Game Play-Color 8. Sound OK.

2-F74LS283Effects Self Test - Row of Characters horizontally

across screen. Effects Game Play-Color & Sound OK.

2-H74LS86All Characters are Squares - Effects Self Test —

Horizontal Color Bars across screen.

2-K74LS89Effects all Sounds - Game plays & color OK.
aL74LS89Same as 2-K
2-M74LS273Same as 2-K
2-P74LSO2Effects Sync - No Video - No Sound — Moving

Diagonal Lines.

2-R74LS161Vertical short lines in color - Effects Game Play.
2S74LS161Horizontal Color Bars across screen - Effects Game

Play.

Page 8

POSITION

3A

3B

3-D

SE

3F

3-H

3K

3L

3-M

3-N

3-P

3-R

3S

4A

4B

4C

4D

4E

4F

4H

4K

aL

4-M

4p CHIP

74LS158

74LS157

74LS75

74LS20

74LS89

74LS89

74LS158

74LS157

1M5623

74LS74

74LS10

74LS161

74LS161

1M5623 (Prom)

74LS377

74LS00

74LS273

74LS157

74LS86

74LS245

2114 (Ram)

2114 (Ram)

2114 (Ram)

2114 (Ram)

2114 (Ram) POSSIBLE TROUBLE

No Characters in maze.

No Video (Dead)

Characters missing in maze - Game plays without seeing Characters.

No Video (Dead)

Same as 3-D

All Characters move jerking - Characters do not stay in maze.

No Sounds - Game Plays.

No Sounds - Game Plays.

No Sounds - Game Plays.

Effects Sync - Color Diagonal Lines.

No Video (Dead)

No Video (Dead)

Effects Sync - Diagonal Lines.

No Video (Dead)

Distorted Letters - No Color - Maze is White —Effects Game Play.

No Video (Dead)

No Maze - Screen covered with Number Fives — No Letters - Characters moving about.

Distorted Maze - Letters Upside Down — Characters Distorted.

Distorted Characters - Letters and Sound.

Flashing White Dots - No Color.

All White Zeros on screen.

Flashing Numbers and Letters in Color.

Blank screen with a Single Zero at top of screen -Two Red Characters Only.

All White Zeros on screen.

Flashing Self Test - Flashes continuous.

Page 9

POSITION

aR

5-A

5-B

5-C

5-E

5-F

5-L

5-M

5-N

5S

6B

6-D

6-E

6-F One. 6-H

6-J

6-R

6S

TF

7H

7-J CHIP

2114 (Ram)

74LS157

74LS194

74LS194

9332 (Prom)

9332 (Prom)

74LS139

74LS74

74LSO8

NVC 284 (Custom)

Z80 CPU

NVC 285 (Custom)

9332-B (Prom)

9332-B (Prom)

9332-B (Prom)

9332-B (Prom)

74LS367

74LS367

7603

74LS08

74LS138

74LS138

74LS02

74LS139

74LS42 POSSIBLE TROUBLE

Screen is blank with a Number One flashing — A single Character can be seen.

Blue Screen - All Characters are Squares — No Letters or Numbers.

Color Squares around each Character - All maze dots are blue.

Effects Maze - Characters have Squares around them - Self Test in Red.

Blue screen with Horizontal Squares - No Maze — No Letters or Numbers random Characters.

Effects Characters in Maze which are Squares — Everything else normal.

Red screen flashing with all Letter F’s.

Screen covered with Garbage in Color.

Effects Sync - Moving Diagonal Lines in Color.

Flashing White Dots - Game plays.

Screen covered with Garbage in Color.

Same as 6-B

Flashing blue Zeros and Garbage — Continuous Meter Pulses. Blank screen with a Flashing Number One — Bad Rom

Screen covered with Garbage.

Blank screen with random Characters.

Screen flashing with Garbage in Color.

Same as 6-R

No Video (Dead)

Eleven Horizontal rows of Zeros across screen.

No Video (Dead)

No Video (Dead)

Same as 7-J

Screen covered with Garbage in Color.

Same as 7-J

Page 10

POSITION

8-A

8-B

8-C

8-D

8-E

8-F

8-H

8-K

9-C

10-A CHIP

74LS107

74LS368

74LS74

74LS367

74LS367

74LS367

74LS367

74LS259

74LS161

LM377 - LM1877

ADDITIONAL DEVICES

10-A

B-7

P-8 (IR1)

R-9

L-9

Cc-9 Dip Switch

Crystal (18.432)

78GVIC (Regulator

D44VM4

D40K1

2N3391 POSSIBLE TROUBLE

No Video (Dead)

Same as 8-A

Effects Sync - Diagonal Lines flashing.

Effects Dip Switch settings.

No Coin - No Up & Down Controls - 1st Player.

No Controls - 2nd Player.

No Test Switch - 1 & 2 Player Select.

Stays in Self Test-Shows Memory OK.

Screen covered with Garbage in Color.

No Sounds.

Effects Coin Play - Number of Pat-Man Bonus Pac-Man.

No Video (Dead)

Effects + 5 VDC

Pass Transistor - Effects + 5 VDC

Transistor - Effects Coin Counter

Transistor - Effects Power Reset

Page 11

2-80 CPU PIN DESCRIPTION

The Z-80 CPU is packaged in an industry standard 40 pin Dual In-Line Package.

The 1/O pins are shown in figure 3.0-1 and the function of each is described below.

My MREO

system J !ORQ

CONTROL ) RO

WR

RFSH ADDRESS gus

HAUT

wait cpu CONTROLY int Nm

RESET

cru BUSRO

BUS CONTROL \ BUSAK

* +5V DATA GND BUS

2-80 PIN CONFIGURATION FIGURE 3.0-1

Page 12

PAC - MAN PC A082-91375-A000

CHIP NUMBER FUNCTION

74LS00 Quad 2 Input Nand

74LS02 Quad 2 Input Nor

74LS08 Quad 2 Input And

74LS10 Triple 3 Input Nand

74LS20 Dual 4 Input Nand

74LS42 BCD to Decimal Decoder

74LS74 Dual “D” Flip-Flop

74LS75 Quad Latch

74LS86 Quad 2 Input Exclusive or

74889 64 Bit Ram 16 x 4

74LS107 Dual “JK” Flip-Flop

74LS138 3 to 8 Line Decoder

74LS139 Dual 2 to 4 Line Decoder

74LS157 Quad 2 to 1 Line Multiplexer

74LS158 Quad 2 to 1 Line Multiplexer Inverting

74LS161 4 Bit Binary Counter

74LS174 Hex “D” Flip-Flop

74LS194 8 Bit Shift Register

74LS245 Octal Bus Transceiver

74LS259 8 Bit Addressable Latch

74LS273 Octal “D” Flip-Flop

74LS283 4 Bit Full Adder

74LS367 Hex Bus Driver

74LS368 Hex Bus Driver Inverting

74LS377 Octal “D” Flip-Flop

Z80 CPU

LM377 - LM1877 Dual Audio Amplifier

NVC284 Custom V Ram Addresser

NVC285 Custom Z80 Sync Buss Controller

CD4066 Quad Bilateral Switch

Page 13

PAC - MAN PC A082-91375-A000

CHIP NUMBER

2114

1M5623

7603

MCM 2532

SL 4239

93415

27LS00

MB 8125

CD 4099

N8T245

54LS174

MB7052

MB7051

8304

ADDITIONAL DEVICES

18.4320

78GVIC

D44VM4

D40K1

2N3391

1N 4004

A15

1N914B

1N4737 FUNCTION

Ram 1K X 4

Prom 256 x 4

Prom 32 x 8

Prom 4K x 8

Ram1K x 1

Ram1K x 1

Ram1K x 1

Ram1K x 1

8 Bit Addressable Latch

Octal Bus Transceiver

Hex “D” Flip-Flop

Prom 256 x 4

Prom 32 x 8

Octal Bus Transceiver

Crystal

Voltage Regulator

Transistor NPN

Transistor NPN

Transistor NPN

Diode

Diode

Diode

6.2V Zener Diode

Page 14

SERVICE BULLETIN

GAME: PAC-MAN

SUBJECT: Custom Chips 6-D and 5-S

When the custom chips are not available due to a supply problem the following alternate plug in units will be used.

  • At location 6-D PC 082-91383-BOO0 280 sync buss controller.
  • At location 5-S PC 082-91384-B000 V-Ram Addresser.

PAC - MAN

V - RAM ADDRESSER (284) # A082-91384-B000

CHIP NUMBER FUNCTION 74LS02 Quad 2 Input Nor

74LS86 Quad 2 Input Exclusive or

74LS157 Quad 2 to 1 Line Multiplexer

74LS257 Quad 2 to 1 Line Multiplexer-Tri State

Z- 80 SYNC BUSS CONTROLLER (285)

# A082-91383-BO00

74LS02 Quad 2 Input Nor

74LS74 Dual “D” Flip-Flop

74LS139 Dual 2 to 4 Line Decoder

74LS244 Octal Buffers - Tri State

74LS374 Octal “D” Flip-Flop-Tri State

Page 15

2E0€ ZE600 ISOM ‘OW Luva DLAYNaHOS 008-b8 5 Sean | AW uve weieves 09 ‘94 AVMQIN

fe2]-oev @- wv wos wis oz =]

@- ew B-ov Bev -tv B-ow G-av [2 - ev

T awe mm Pre Ti 5 Cal | C be nent

a ia}

Page 16

NOTES

This Space is provided for personal notes

Pages 14, 16, 18 & 24 left blank

Page 17

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 18

NOTES

This Space is provided for personal notes

Pages 14, 16, 18 & 24 left blank

Page 19

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 20

NOTES

This Space is provided for personal notes

Pages 14, 16, 18 & 24 left blank

Page 21

(omrTOR ace

5 wonton inTERrACE

PAC -MAN U.R. MOWY MPG CO. 10750 W. GRAND AVE, FRANKLIN PARK ILL. 6O131

WIRING SCHEMATIC PA 'T NO. WOSt-00932-A0Z4

MT-0 xEORMER GOCTC SHS? APBRMER $8 ENE

GAME LOGIC BOARD PC, A082 -91375-A000

autem sevect ean] ow yok tw,

Page 22

= Pettis cistttecst seh gs ee eases

Page 23

INSTRUCTIONS FOR MODIFICATION OF PAC-MAN GAME PCB

THE FOLLOWING ARE INSTRUCTIONS FOR MODIFYING PAC-MAN

PCB SUCH THAT @ THE DEGREE OF DIFFICULTY OF THE GAME

IS INCREASED.

cio C—(10:F BV 2 +

ey, connected, the game When this jumper pad is

becomes more difficult.

Page 24

December 3,1980

SERVICE BULLETIN

GAME: PAC - MAN

SUBJECT: STATIC CONDITION CAUSING A FALSE RAM AND ROM TEST.

MODIFICATION:

  • ORDER FROM MIDWAY’S SERVICE DEPARTMENT A ANTI-STATIC KIT PC A082-91389-A000 AND INSTALL AS SHOWN IN INSTRUCTION DIAGRAM. (FIGURE #1).
  • CHECK GAME OUT ELECTRICALLY.

ANDY DUCAY SERVICE MANAGER

Page 25

ANTI-STATIC INSTALLATION INSTRUCTIONS

FIGURE #1

EXISTING CABLE

PART NO. loty DESCRIPTION Tem] A082~91389-ACOO} | | FILTER P.C.BOARODASSY.| I | ice 7-00042-0237) 2 | SPACER 00!17-00101-0052} 2 ex, ‘SLT HEX HO SCREW]

0017-00101-0551} | 3000-17246-0300 Zz GROUND STRAP 6-32 Yq BIND. HD. MS. 0017-00104-0002| 0017-00103-0005 6-32 HEX NUT

0017-00104-0003 6 SPLIT LOCK WSHR 6 f

0017-00104-0062| 2 | 8 FLAT WSHR | | 8 SPLIT LOCK WSHR 0017-00103-0008} | | 8-32 HEX NUT 10

GROUND STUD ALL PARTS NUMBERED INCLUDEDIN KIT A866-00078-0000

NOTE: GROUND STRAP TO BE CONNECTED TO EXISTING

MIDWAY MFG. Co. ABALLY COMPANY

MOS1—00866—A019

Page 26

NOTES

This Space is provided for personal notes

Pages 14, 16, 18, 20 & 24 left blank