CATHODE RAY TOMES

Starrider

Star Rider (REV 1) (Williams, 1984) · Document · 12 pages · 8 sections · original scan

Page 1

IN ILLINOIS CALL: 800-572-4324 {312} 267-2240 wo e = es o fe] E a m mm Zz ¢ = a m a ” ( ae es Me

3401 N. California: Av. Chicago, tL 60618: Lif r m z of" gS u Zz a

Page 2

ROM SUMMARY

icDESCRIPTIONTYPE NUMBER Loc.BOARD PART NO.
STAR RIDERPROM, 16Kx8271281u4ROMA-5341-10607
STAR RIDERPROM, 16Kx8271282u19ROMA-5341-10608
STAR RIDERPROM, 16Kx8271283usROMA-5341-10609
STAR RIDERPROM, 16Kx8271284u20ROMA-5341~-10610
STAR RIDERPROM, 16Kx8271285U6ROMA-5341-10611
STAR RIDERPROM, 16Kx8271286U21ROMA-5341-10612
STAR RIDERPROM, 16Kx8271287U7ROMA-5341-10613
STAR RIDERPROM, 16Kx8271288U22ROMA-5341-10614
STAR RIDERPROM, 16Kx8271283usROMA-5341-10615
STAR RIDERPROM, 16Kx82712810U23ROMA-5341-10616
STAR RIDERPROM, 16Kx827128ilusROMA-5341-10617
STAR RIDERPROM, 16Kx82712812U24ROMA-5341-10618
STAR RIDERPROM, 16Kx82712813ULOROMA-5341-10619
STAR RIDERPROM, 16Kx82712814U25ROMA-5341-10620
STAR RIDERPROM, 16Kx82712815ULLROMA-5341-10621
STAR RIDERPROM, 16Kx82712816u26ROMA-5341-10622
STAR RIDERPROM, 16Kx827128 17Ul2ROMA-5341-10623
STAR RIDERPROM, 16Kx82712818U27ROMA-5341-10624©
STAR RIDERPROM, 16Kx82712819u13ROMA-5341-10625
TextPROM, 8Kx8&276425u46ROMA-5343-10658
STAR RIDERPROM, 4Kx8273226U3PIFA-5 343-10636
Translation PROM, 1Kx47122none ULO, Ull VGGA-5282-10595
HorizontalPROM, 512x86349 none u74VGGA-5282-10637
Clock ROMPROM, 32x88258123 none u1l4VGGA-5282-10295
SoundPROM, 8Kx8276427ullSound A-5343-10663
STAR RIDERPROM, 16Kx82712830usCPUA-5343-10652
STAR RIDERPROM, 16Kx82712831ulsCPUA-5343-10653
STAR RIDERPROM, 16Kx82712832U26CPUA-5343-10654
STAR RIDERPROM, 8Kx8276434U45CPUA-5343-10656
STAR RIDERPROM, 8Kx8276435USs2cPuA-5343-10657

NOTICE TO ORDER REPLACEMENT ROMS from your authorized WILLIAMS distributor, specify

  • part number shown above, (2) ROM-label color, (3) REV level (number) on the label, and (4) which game the ROM is used in.
Page 3

=3-

WARNING

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been certified to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to correct the interference.

CAUTION

THE TRIMMER POTS in this game have been peaked at the factory and require special equipment to realign. Refer servicing that may involve these trimmers (especially those on the NISC board) to qualified personnel at_your authorized WILLIAMS distributor.

CAUTION

ALWAYS REPLACE THE SHIPPING SCREW and lens cap on your videodise player before you move or ship the player. Failure to replace the shipping screw will result in expensive damage to the slider assembly. Unprotected lenses may become dirty or damaged in transit. The player might not operate if the lens is dirty or damaged.

NOTICE

LENS-CLEANING PROCEDURE. Roll a piece of lens tissue over the top of a cotton swab. Use FREON T (registered trademark of Dow Chemical Corporation) on the swab and clean the lens with circular motions. Never clean more than one lens with a single tissue.

Setting Up Your Videodisc Player

  • Open the game's back panel,
  • Remove the cardboard shipping-pad between the videodisc player and the game's front cabinet wall, Save this pad (part no. 08-7417) for future moving or shipping.
  • Remove the two bolts at the rear of the player-mounting board. Save these bolts for step 16.
  • Gently slide out the player-mounting board.
  • Turn game power ON.
  • Press the REJECT button to unlock the top of the videodisc unit. Open the top. (NOTE: The top will not open if the game is OFF or unplugged from the power connector. }
  • Remove the shipping screw and bracket from the disc compartment. Save this for use whenever you move the game.
  • Remove the lens cap. Save this for use during future shipping.
Page 4

-4- REMOVE THE REMOVE THE LENS CAP Suipeiwa SCREW

"OOD lUMLOCKED

How to apen the hood Shipping screw 0 cap removal

  • Inspect the videodisc for fingerprints or scratches.
  • Clean the disc (if necessary) with glass cleaner and a lintless piece of cloth. See the instructions on the disc label. (MAINTENANCE TIP: repeat the cleaning at least once a week. NEVER use solvents on the disc.)
  • Handling the disc by its edge and center hole ONLY, place the disc onto the

player. If one side of the disc seems more scratchfree than the other, place @

the better side down. This side will be played. Save the disc sleeve for use during future shipping.

  • Close the lid on the player. (NOTE: The disc won't rotate unless the lid is securely closed.)
  • Turn game power OFF.
  • Connect the following cables between the player and the game's PC boards:

//26-pin ribbon cable to the PIF board

/faadio cable to the sound board (The red RCA-connector should come from the RIGHT/2 disc-player output.)

//tideo cable to the NTSC/RGB board

//player power-cord to the outlet on the power-transformer chassis

  • Slide the player back in the game.
  • Secure the player-mounting board with the two bolts from step 3.
  • Replace the game's back panel.
Page 5

© Power Turn-On

WARNING

THREE-WIRE PLUG. This game must be plugged into a properly-grounded outlet to prevent shock hazard and to assure proper game operation. DO NOT use a "cheater" plug to defeat the ground pin on the power cord, and DO NOT cut off the ground pin.

WHEN THE GAME IS FIRST TURNED ON general illumination should light and a moment later the disc should spin up (increase its RPMs toward operating speed).

  • After disc speed stabilizes a series of colors will sweep across and fill the screen. Each color will replace the last.
  • Next a scanning "rug pattern” indicating the RAM test should appear on the screen.
  • This will be followed by a ROM test: The CPU board and the ROM boara are depicted on the CRT. Each ROM chip is shown. As test results are determined, the ROMs turn green if they're good or red if they're bad. Gray ROMs aren't used in this game.
  • Finally a red moire~pattern with four sections will fill the entire screen.

IN_A CORRECTLY-RUNNING GAME tests will be followed by the message "INITIAL CHECKS INDICATE ALL SYSTEMS GO". If failure messages come up on the screen instead, refer to An Outline Of Built-In Test Procedures.

Game Operation

GAME START

INSERT COINS. The game allocates an adjustable number of credits per coin and displays this number on the CRT. At factory settings, when one credit is displayed, pressing TURBO initiates a game.

PLAYER CONTROLS

NOTE: Ali player controls utilize accurate, durable opto-interrupter technology.

//STEERING is achieved with fully-functional motorcycle-style handlebars.

//XOUR THROTTLE is built into your right handlebar-grip.

L7UT IN YOUR TURBO! Watch the road open up as your horsepower soars!

ee 7/STOP ON A DIME! Your left fingers control the most-effective brakes ever imagined.

Page 6

GAME PLAY

A STAR RIDER CYCLE is designed for speed and distance. It's built to race over roads that suddenly pitch straight up and lead to horizons that haunt and tempt. Through the fantasy worlds of Cubitania, Hexagonia, Crystallia, Stalactia and others...each one setting a more challenging course than the last!

FORCE FIELDS KEEP THE PLAYER ON TRACK as he races against four able opponents: - Thunderbolt, Sidewinder, Red Hawk and Gold Rider. Each race starts and finishes in the Cosmodrome, where the robofficial announces the player's race results.

Bookkeeping Totals

BOOKKEEPING TOTALS SHOW YOU AT A GLANCE if game settings are bringing you a satisfactory return on your investment: Only games by WILLIAMS ELECTRONICS have this feature. Think of it as a unique way to keep your STAR RIDER game the leader of the pack when it comes to earnings...location after location, week in and week outs

auTo-uP O@O (HIGH, MANUAL ADNANICE Reser

Diagnostic Button Switches

ENTERING BOOKKEEPING MODE. Inside the coin door is a bracket with three button switches. Set the AUTO-UP/MANUAL-DOWN (center) switch to AUTO-UP. Press the ADVANCE switch to display BOOKKEEPING TOTALS on the screen. Now check those totals. Here's what to look for...

BOOKKEEPING TOTALS

LEFT SLOT COINS 432 CENTER SLOT COINS 0 RIGHT SLOT COINS 338 TOTAL UNITS PAID 830 TOTAL BUY-INS 204 TOTAL GAMES PLAYED 517 TOTAL UNITS PLAYED 517 TOTAL HEATS ATTEMPTED 689 TOTAL HEATS ACHIEVED 172 TOTAL TIME IN MINUTES 107 AVERAGE TIME PER UNIT 2:13

Bookkeeping screen

AVERAGE TIME PER UNIT: TWO MINUTES. Your most important figure on the BOOKEEEPING TOTALS screen is AVERAGE TIME PER UNIT. You'll want to pay special attention to this figure every day for this reason: Thorough field and factory research has shown that two-minute games both satisfy players and_also keep the money flowing.

If games aren't running about two minutes long, then collections probably aren't at their peak. You'll want to tailor your game to your game-playing public. It's easy. But only WILLIAMS games let you do it! Cy) -— << TT

Page 7

-?-

GAME ADJUSTMENTS

BUY-IN TIME IN SECS7DIFFICULTY OF PLAY5
HIGH SCORE ALLOWEDYESLETTERS FOR HIGHEST SCORE3
PRICING SELECTION3RESTORE FACTORY SETTINGSNO
LEFT SLOT UNITS1CLEAR BOOKKEEPING TOTALSNO
CENTER SLOT UNITS4HIGH SCORE TABLE RESETNO
RIGHT SLOT UNITS1AUTO CYCLENO
UNITS FOR START CREDIT2SET ATTRACT MODE MESSAGENO
UNITS FOR BONUS CREDITLt)SET HIGHEST SCORE NAMENO
MINIMUM FOR ANY CREDITtt2ND PLACE GO TO NEXT HEATYES

UNITS FOR BUY-IN CREDIT 2

USE 'TURBO' TO SELECT ADJUSTMENT USE 'STEERING' TO CHANGE ADJUSTMENT PRESS ADVANCE TO EXIT

Adjustments screen showing factory settings

Exclusive Game Adjustments

  • Inside the coin door is a bracket with three button switches. Set the AUTO-UP/MANUAL-DOWN (center) switch to AUTO-UP. Press the ADVANCE switch twice to display GAME ADJUSTMENTS on the screen.
  • With the AUTO-UP/MANUAL-DOWN switch set to AUTO-UP press the ADVANCE switch twice. The GAME ADJUSTMENTS screen will come up.
  • Move the cursor beside the desired adjustment by using TURBO.
  • STEER to alter the value of any adjustment listed on the screen.

Now for the multiple-choice section! Choose one or more:

//OSE THE TURBO AND STEERING CONTROLS to choose the appropriate difficulty level (0 = easiest or extra liberal, 5 = average, 9 = hardest or extra conservative).

//Use the TURBO control to select 2ND PLACE GO TO NEXT HEAT. For longer play, use the handlebars (STEERING) to enter NO for this adjustment. For shorter play, use the handlebars to enter YES.

//SELECT GAME PRICING with standard or custom settings. See Definitions of Pricing Terms later in this chapter.

//PRUT YOUR OWN SLOGAN ON THE SCREEN! Another WILLIAMS exclusive! Here's how: (1) With the AUTO-UP/MANUAL-DOWN switch set to AUTO-UP, press ADVANCE twice so that the GAME ADJUSTMENTS screen comes up. (2) Use TURBO to position the arrow beside SET ATTRACT MODE MESSAGE. (3) STEER to display YES. (4) Press ADVANCE to bring up the ATTRACT MODE MESSAGE screen. (5) Now enter up to two lines of 25 characters by following the instructions on the screen. (6) Once a message is entered, press ADVANCE to restore Game-Over Mode.

Will your message fit on the screen? Try it here first

Page 8

Pricing Table @

Units Min. Units Req'd Units

Left Center Right ForForFor
Coin-DoorPricingSlot Slot Slot Start BonusAny

Mechanism Games/Price Selection Units Units Units Credit Credit Credit

Twin Quarter 01/50¢, 2/$13141200
Quarter,1/50¢, 3/$1, 4/$1.25 03123415Oo
Dollare1/$15141400
Quarter1/50¢, 3/$1, 7/$20124812149624
1DM, 5DM@2/1DM, 12/5DM01202200
e@1/1DM, 6/5DM260L10Q
1 Franc,@1/2F, 3/5F only411662OoQ

5 Franc

25-Cent,e1/25¢, 4/1G61i)41fi)9
1 Guilder1/25¢, 5/1G)BAL)4140
5 Franc,el/5F, 2/10F7102100
10 Franc@1/10F8Lie)2200
1 Franc,e2/1F, 5/2F26ic)1L00

2_ Franc

100 Lire,#1/200 Lire81022tt)9

200 Lire

Twin Coin01/4 Coins51414(()
1/2 Coins, 3/4 Coins 1141240
1/3 Coins, 2/5 Coins 029250oO
1/2, 3/541166200 ©
1-Unit,L/L, 5/50105100
5-Unit1/3, 2/5O2Q105tytt):
AnyeFree Play90090aQ

Game Pricing

PRICING SELECTION allows a shorthand method of setting the pricing functions. If a Humber from one to nine is entered into the PRICING SELECTION function, a corresponding standard setting (shown in the pricing table above) will be entered into the game. The rest of the pricing functions are automatically set for that standard.

FOR CUSTOM SETTINGS first set PRICING SELECTION to zero. Then set the remaining values

according to the pricing table.

‘HE GAMES : PRICE RATIO TO START A GAME is equivalent to the ratio X : VS

where: x SLOT UNITS Vv = COIN VALUE S$ = UNITS FOR START CREDIT

For example at factory settinas with quarter chutes the variables produce 1 : 25x2 or one starting-game for 50¢.

THE GAMES : PRICE RATIO TO BUY IN is equivalent to the ratio X : VB 6)

where: B = UNITS FOR BUY-IN CREDIT (other variables as above) For example, at factory settings the variables produce 1 : 25x2 or one buy-in game for

50¢.

Page 9

=9-

) Diagnostic-Mode Tests SET THE AUTO-UP/MANUAL-DOWN SWITCH to the MANUAL-DOWN position and press ADVANCE. The game is now in its Diagnostic Mode and a ROM test is performed. With ROM test results present on the CRI display, set the AUTO-UP/MANUAL-DOWN switch to the AUTO-UP position. Enter subsequent tests by pressing ADVANCE once more for each test. After the last test, Game-Over Mode commences.

AUTO-CYCLE MODE permits continuous ROM, RAM and CMOS RAM tests to detect failures that only appear after numerous checksum comparisons. Auto-Cycle Mode also repeatedly performs the four-part DISC TEST, If an error is detected Auto-Cycle Mode is aborted and a failure message is displayed on the CRT, (One Exception: STEP DISC-failures don't abort Auto-Cycle Mode.)

  • Open the coin door, It must remain open for AUTO CYCLE.
  • Display GAME ADJUSTMENTS.
  • Move the cursor to AUTO CYCLE. 4, STEER to display YES.
  • Press ADVANCE,
  • To enter Game-Over Mode turn the game off and on.

An Outline Of Built-In Test Procedures

I. Power-Up Tests A. VGG test

  • colored screens
  • no color or missing scanlines: adjust or replace VGG board B. RAM test
  • xug_ pattern as on other games using the WILLIAMS system
  • bad RAM is indicated on the CPU-board LED-indicator by an error code
  • code between 100 and 199 (eg., 1-3-1) for VGG-board RAMs
  • code between 600 and 699 (eg., 6-0-2) for CPU-board RAMs

Cc. ROM test

  • CRT depicts ROM board and CPU board with their plug-in ROMs
  • green chips are good
  • red chips are bad
  • gray chips are not used in this game
  • bad ROM is indicated on the CPU-board LED-indicator by an error code between 200 and 299 (eg., 2-1-1)
  • test has been passed when ALL SYSTEMS GO appears on the screen D. CMOS-data test
  • checksums are compared
  • if CMOS fails test FACTORY SETTINGS RESTORED appears E. PIF test
  • moire pattern with four quadrants
  • performs four resets
  • red moire indicates PIF's successful completion of all four

II, Diagnostic-Mode Tests A, ROM test (as above) . B. RAM test (as above) C. CMOS-RAM test

  • error is displayed on CRT and LED readout on CPU board
  • If CMOS RAM is bad, error code 3 will appear on LED readout
Page 10

D. sound test 1. 2. 3. sound-lines 1-8 are tested

bad sound-lines are indicated on the screen @

Use AUTO-UP to cycle through all the sounds and MANUAL-DOWN to continuously test one sound-line E. switch test 1.

2.

3. for most switches, the name of the switch is shown when that switch is closed for STEER, POWER, BRAKE and TURBO, there's a different system because these controls involve several switches

  • switch being made is shown by number (eg., STEER 1 ON ox POWER 1 ON)
  • it's also shown by position on a bar graph screen format and explanation:

e@all STEER, POWER, BRAKE and TURBO switches are optos ehorizontal graph: line moves left or right of center as each STEER-opto is blocked evertical graph: fills in as more POWER-switches close

F. disc test i.

2.

TEST

RESET RESPONSE m3 WALKING BIT TEST 4 SEARCH TO STEP DISC

this is actually an examination of intra-system communications Ce

  • checks operation of PIF (processor interface) board d consists of four subtests
  • successes and failures of each are displayed on the screen
  • in addition, an amber square shows which subtest is being performed what to expect
  • expect a 1% to 10% failure-rate on the STEP DISC subtest (if greater, clean disc and lens)
  • failures in the RESET RESPONSE or WALKING BIT TEST probably represent a hardware failure screen format and explanation:

DIsc TEST SUCCESS FAILURE eamber @Mf square shows test in progress Q esimulates warm start O etests PIAs on PIF board 29 1 echecks to see if PIF can find a frame 6 1 echecks to see if PIF can step disc

G. DISC SEARCH-test 1.

3. 4. 5. includes manual search-test and manual step-test use MANUAL-DOWN to view expanded (game) video

use AUTO-UP to view normal (disc) video r

stepping below 0 or above 32,000 will cause error message eliminate error message by turning game off and on

  • or by advancing through diagnostics and reentering manual step-test
Page 11

H. crosshatch pattern (top screen only)

  • aids technician in converging monitor I. purity screens
  • solid red, green and blue screens
  • for monitor adjustments and for checking color RAMs
  • tainted colors: degauss screen and adjust purity magnets
  • missing colors or vertical lines: possible color-RAM error J. color bars
  • for monitor adjustments and for checking color RAMs
  • adjust color drives and cutoffs, screen and black-level controls for proper colors
  • missing colors or wrong colors: possible color-RAM error
  • adjust player to match hue of of top bars (from player) to hue of bottom bars (from VGG board)
  • disc and VGG bars don't line up perfectly due to delay in NTSC board

PIF-Board Error Codes

These error codes appear on the CPU-board LED display when diagnostic procedures locate a malfunction in the game. Using the codes will help you zero in on the general problem.

NOTICE

  • The disc player must be turned on and connected to the PIF board. Bad cables will produce the same symptoms as bad boards.
  • A dirty disc or lens may prevent the player from coming up to speed (a condition referred to as spin-up/spin-down).

CODE USUAL CAUSE

os01 (1) shipping screw or lens cap not removed from player; (2) dirty disc or no disc on player; (3) player top unlocked; (4) ribbon cable or power disconnected from player 0502 disc not up to speed or player failure: clean lens, disc 0503 disc, player or PIF (see 0501) 0504 disc not up to speed or player failure: clean lens, disc 0505 bad disc, bad player or bad VGG board 0506 dirty or damaged disc: perform SEARCH-TEST; try other side of disc 0507 disc, player or PIF (see 0501): perform DISC TEST 0508 disc, player or PIF (see 0501): perform DISC TEST 0509 disc, player or PIF (see 0501): perform SEARCH TEST 0510 PIF: try disc test or replace PIF board 0511 pit 0 stuck low: replace CPU board or PIF board 0512 bit 1 stuck low: replace CPU board or PIF board 0513 bit 2 stuck low: replace CPU board or PIF board 0514 bit 3 stuck Low: replace CPU board or PIF board 0515 bit 4 stuck low: replace CPU board or PIF board 0516 bit 5 stuck low: replace CPU board or PIF board 0517 bit 6 stuck low: replace CPU board or PIF board 0518 bit 7 stuck low: replace CPU board or PIF board 0519 (test _not used) 0520 disc, player or PIF (see 0501) 0521 disc, player or PIF (see 0501) O22t ASC Prayer

Page 12

~12-

Sound-Board Error Codes

Sound-board error messages may also appear on the CPU~board LED display. They can be used in conjunction with the sound-board diagnostic button to help you localize sound problems.

CODE USUAL CAUSE MISSING SOUND

400 bad sound-board or cables {no sound) 401 sound-line #1 stuck low rising swept-tone 402 sound-line #2 stuck low typewriter 403 sound-line #3 stuck low high-pitched ping 404 sound-line #4 stuck low carriage return 405 sound-line #5 stuck low crash or explosion 406 sound-line #6 stuck low high-pitched peep 407 sound-line #7 stuck low turbo whoosh 408 sound-line #8 stuck low coin sound: siren

STAR RIDER Circuitboards

PART NO, DESCRIPTION

c-9928 PIF PC-board C-9994 throttle opto PC-board C-9995 steering opto PC-board

C-9996 brake opto PC-board @

D=-10069 heatsink assembly D-10070 power supply PC-board

D-9837 NTSC/RGB PC-board D-9922 CPU PC-board D-9924 VGG PC-board

D-9926 ROM PC-board D-9930 EXP PC~board D-9941 sound PC~board

NOTICE

"STAR RIDER", "DISCAN" and "DURAMOLD" are trademarks of WILLIAMS ELECTRONICS, INC.

© 1984 WILLIAMS ELECTRONICS, INC.